Types of mechanisms for sliding doors. Sliding mechanisms for doors Sliding doors with invisible rail

Sliding interior doors are increasingly being installed not only in apartments, but also in country houses, office buildings. Such gates have a number of advantages, the main of which are space savings and an increase in the usable area of ​​\u200b\u200bthe premises.

Advantages and disadvantages of interior sliding doors

The choice of this functional element of the interior is due to a number of advantages:

• increase in usable area of ​​the premises;
• do not slam shut in drafts;
• they cannot be opened by pets;
• the possibility of automating the mechanism;
• no thresholds.

Sliding systems for interior doors also have disadvantages: first of all, poor sound insulation and high cost of fittings. The first takes place when embedding the mechanism into the wall. If you place the sliding door mechanism along the wall, the sound transmission will decrease.

Mechanisms for sliding interior doors can be improved by installing special sensors. In addition, when automating sliding doors, access levels can be taken into account. That is, the door can be opened by code, plastic card or fingerprint.

Design and types of sliding doors

Sliding systems for interior doors consist of the leaf itself, guides and a roller mechanism. Different types of doors may include more than two roller mechanisms, several sections and guides. Consider the principle of operation and the device of sliding doors. The mechanism for a sliding interior door works as follows: the roller mechanism is attached to the canvas, as a result of which the rollers move along the guides, opening or closing the sash.

There are many types of such products, but the following are the most popular: interior sliding compartment doors; cascade sliding; folding type "accordion"; radius. The latter are the most difficult to install. The most commonly used compartment doors, which are the easiest to install.

About the quality of components

The mechanism for a sliding interior door is selected based on the following factors: weight, material and height of the leaf, the need to be built into the wall, the number of rollers. The more complex the system, the better the fittings should be. So, single-leaf interior sliding doors are lighter in weight than double-leaf ones, and you can choose simpler and lighter components for such a product.

Most ready-made kits are equipped with plastic rollers, which are not durable. It is necessary to choose a mechanism for a sliding interior door in advance, even in the process of finishing work, so that you do not have to fix the walls and floors.

Web material

The most commonly installed classic wooden interior doors. High-quality material (oak, maple, cherry) is quite expensive, but the most durable.

Fiberboard products are cheaper, do not deform, but are inferior in quality to their more expensive counterparts. These doors are distinguished by low strength and fairly good sound permeability.

MDF sheets are distinguished by an average level of quality and durability. The most exquisite doors are made of solid wood, but such products will also be very expensive.

Sliding interior doors glass are becoming more and more popular. They use special shatterproof glass, which makes them safe to use.

Glass is tempered during processing during the manufacturing process, so it can be stronger than wood. Products made from this material differ in many parameters: material thickness, surface appearance, properties. They can be installed in rooms with high humidity - swimming pools, bathrooms. The glass door is easy to care for and environmentally friendly.

Plastic sliding doors are best suited for installation in administrative premises.

To decorate the interior, preference should be given to a door leaf made of solid oak or tempered glass. Such products can become the highlight of the room and emphasize the status of the owners.

Choice of accessories

Hardware is of great importance. Poor quality will lead to a quick breakdown of the door mechanism. It is better to give preference to steel or aluminum when choosing a material, as it takes on the main load. Despite the tendency to complete the mechanism with plastic wheels, it is better to replace them with metal ones.

The more metal parts, the more durable the door will be. High-quality components can provide, with proper care for the system, more than a dozen years of service. Accessories for sliding interior doors also include a special cassette, if you plan to install the mechanism into the wall.

The locks and door handles in the interior doors also differ. They are "recessed" into the canvas, while in conventional swing doors they are installed on the surface. Locks and handles are usually included in the kit and are combined in style with other details.

Stages of installation of sliding doors

Fasteners and instructions with step-by-step installation are usually included in the finished kit. Typically, sliding systems for interior doors differ in the profile and type of roller system. Therefore, the general principle of installation will be the same.

Installation of a sliding door can be divided into several stages:

• marking and installation of guides;
• installation of brackets for roller carriages;
• canvas installation;
• installation of handles and locks;
• decorative trim to mask slopes and roller mechanism.

Information on how to install sliding interior doors is given in a general way. When installing a sliding door, two mounting options are possible - placing the leaf along the wall or in the thickness of the opening.

Guide marking

To mark the guides, it is necessary to measure the height of the door leaf and set aside its size on the wall above the doorway. From this point, it is necessary to step back seven centimeters up and draw a horizontal line with the help.

Installing guides

The lower edge must be attached to the bar to the drawn line. should be 50 x 50 mm. The beam is screwed to the wall using anchor bolts. In this case, its position must be strictly horizontal.

Several mounting holes are drilled in the metal guide in increments of no more than fifteen centimeters. This part is attached to the lower end of the beam at a distance of 5 centimeters from the wall. This distance is due to the need for free movement of the door along the wall.

Installing brackets for roller carriages

The rollers are assembled by connecting to the carriages and brought into the guide. In this case, it is necessary to check the movement of the rollers along the guides. The wheels should move freely and without excessive noise. The ends are closed with plugs that serve as a stopper for the rollers.

Staples are installed on the upper end at regular intervals. In this case, the number of staples must correspond to the number of carriages.

Door installation

The canvas must be hung, while connecting the carriages with brackets, while it should move easily and not touch the wall.

If everything is done correctly, you can continue with the installation. To do this, the door leaf must be opened all the way and mark the place on the floor where the lower guide element will be attached. After that, the door is removed again.

Using a milling cutter, a full-length groove is made at the bottom end of the blade. In this case, the depth and width of the groove depends on the size of the lower leash. For free movement on the mechanism, it must be slightly larger.

The plumb bob is fixed on the top rail. After careful measurement, the most accurate position of the leash is determined, which is screwed to the floor with self-tapping screws.

The canvas is installed in a vertical position and put on a groove on a leash. By adjusting the bolts of the carriages, it is necessary to achieve their correct placement. The mechanism for a sliding interior door at this stage can be considered installed.

Next, you need to cut the lock and handle into the door leaf, as a rule, the installation hole is already provided by the manufacturer, and the installation process is described in detail in the instructions. Often the kit comes with a lock and handle already installed.

decorative trim

The mechanisms for sliding interior doors have been installed, and only the final part remains - the masking of structural elements. The decorative box is designed to hide the load-bearing timber. Platbands are installed around the perimeter of the entire structure to give it a finished look.

Sliding door mechanism- this is a unique hanging sliding system for interior doors, designed for the convenience of people - it allows you to increase the free space of the room. Saving potentially useful spacehappens due to the possibilityinstallation of a sliding door leaf with rollers for sliding doors and a guide for sliding doors (sliding door mechanism assembly) in the doorway or along it, where it will be f operate the sliding door on the mechanism.

Sliding door mechanism includes:

On the installation of a mechanism for sliding doors.

Install sliding door mechanism no more difficult than to install a standard swing door, because. to install sliding doors on mechanisms, exactly the samedoor leaf, but when installing a mechanism for sliding doors, the door leaf lends itself to lessmilling.

Sliding door mechanism can be installed: into a hole in the wall along the wall
Sliding door mechanisms by type: single leaf sliding doors double sliding doors

Examples of installation of sliding doors on mechanisms:

Installing the mechanism Sliding doors along the wall	Installation of mechanisms Sliding door opening in the wall

Sliding door mechanism installation diagram

Sliding doors save potentially valuable room space - it's a fact no sliding door will work without quality sliding door mechanisms - even more undeniable fact .

The quality of a sliding door mechanism is expressed in the quality and functionality of its constituent parts.

Also, regardless of the type of your sliding door and the sliding door mechanism installed there, the sliding door can be upgraded.

1. installation of the sliding mechanism of synchronous opening

2. installation of the door closer on the sliding door mechanism

3. installation on the mechanism of sliding doors of the system for parallel opening of doors

Also, it is worth adding that each sliding door mechanism is equipped with assembly diagram .

Our sliding door mechanism a multifunctional thing, it is suitable for installing sliding interior doors in apartments and offices, sliding partitions in country houses and industrial premises, for example, it is used to organize work compartments in car services and car washes, also sliding door mechanisms widely used for hanging heavy curtains, such as in assembly halls.

Series: Easy Kit Standard

For canvas widths: 600, 700, 800, 900, 1000

bottom guide

80

Purpose: for wooden doors

Equipment:

Construction type: suspended

Series: standard

For canvas widths: 600, 700, 800, 900

Possible additional options: bottom guide

Maximum load per set of rollers: 60

Purpose:

Equipment: guide with one set of rollers

Construction type: suspended

Series: standard

For canvas widths: 600, 700, 800, 900

Possible additional options: bottom guide

Maximum load per set of rollers: 80

Purpose: for wooden doors, for sliding partitions

Equipment: guide with one set of rollers

Construction type: suspended

Series: standard

For canvas widths: 1000, 1100, 1200

Possible additional options: bottom guide

Maximum load per set of rollers: 60

Purpose: for wooden doors

Equipment: guide with one set of rollers

Construction type: suspended

Series: standard

For canvas widths: 1000, 1100, 1200, 1300, 1400, 1500

Possible additional options: bottom guide

Maximum load per set of rollers: 80

Purpose: for sliding partitions

Equipment: guide with one set of rollers

Construction type: suspended

Series: with closer

For canvas widths: 600, 700, 800, 900

Possible additional options: bottom guide

Maximum load per set of rollers: 40

Purpose: for wooden doors, for sliding partitions

Equipment: guide with one set of rollers

Construction type: suspended

Series: standard

For canvas widths: 600, 700, 800, 900

Possible additional options: bottom guide

Maximum load per set of rollers: 60

Purpose: for wooden doors, for sliding partitions

Equipment: guide with one set of rollers

Construction type: suspended

Series: Easy Kit Standard

For canvas widths: 600, 700, 800, 900

Possible additional options: bottom guide

Maximum load per set of rollers: 80

Purpose: for wooden doors

Equipment: guide with two sets of rollers

Construction type: suspended

Series: standard

For canvas widths: 600, 700, 800

Possible additional options: bottom guide

Maximum load per set of rollers: 35

Purpose: for wooden doors, for sliding partitions

Equipment: synchronous guide with two sets of rollers

Construction type: suspended

For canvas widths: 600, 650, 700

Purpose: for wooden doors

Equipment: guide with one set of rollers

Construction type: suspended

Series: D80

Possible additional options: -

Maximum load per set of rollers: 80

Sliding mechanisms for doors

Sliding mechanisms for doors or partitions are an important functional part of the whole set. Sliding or compartment is any door, partition installed on a sliding system. Depending on the number of canvases, a sliding partition can be single-leaf, double-leaf, etc.

The sliding mechanism for doors consists of the following elements:

roller sets. Each kit includes - two rollers, fasteners, stoppers and a lower leash installed on the floor under the door leaf. The rollers, depending on the model, have a different load capacity.

guide for sliding doors in the form of a rail with a special aluminum profile. The guide has a special dovetail groove for mounting with brackets. The inner shape is ideal for rollers. For high-quality and quiet door movement, it is better to buy rollers and rails from the same manufacturer. Depending on the needs, the guide can reach six meters.

additional accessories: bottom guide, closer, synchronizer.

For special conditions, special sets of sliding mechanisms may be required. Depending on the needs, they have certain features and equipment. For example, sliding synchronous opening mechanisms for a double-leaf door have two sets of rollers, two lower leashes, and the length of the upper rail, depending on the width of the door panels, can be more than three meters. The set of the synchronous mechanism also includes a cable and rollers through which the force is transmitted to the opposite leaf. Doors mounted on such a mechanism simultaneously move apart in different directions.

The sliding mechanism for glass doors is not very different from the usual ones, the difference is only in the fastening to the canvas.

In our store you can buy different rollers in a ready-made kit, selected for certain conditions.

The times when only simple swing doors were sold in stores have sunk into oblivion. A modern consumer can choose canvases of various designs and mechanisms for his home. Each of them has its own characteristics, pluses and minuses.

The popular sliding door mechanism, which is in great demand, deserves special attention.

Advantages and disadvantages

First appeared on the market, sliding doors made a splash. These options quickly gained enviable popularity among owners of apartments and private houses. The demand for such designs was due to their original design and good performance.

At the moment, it is difficult to surprise anyone with sliding canvases, as they have tightly entered the life of modern users.

These beautiful and functional models have a number of advantages that make them very popular.

• First of all, it should be noted that there is a noticeable saving in living space when using sliding doors, since they are not at all like classic hinged structures, and the doors in them do not take up additional space during opening or closing. This characteristic is especially useful in the conditions of small-sized dwellings, of which there are quite a lot today.
• Many people mistakenly believe that the installation of such systems is complex and time consuming. In fact, everything is much simpler, and it is possible to cope with many stages of work without the involvement of specialists. Before installing sliding structures, it is not even necessary to carry out preparatory repairs.

• Of course, one cannot fail to mention the spectacular and rich appearance of sliding structures. With the help of such elements, you can revive the living space and give it a special style.
• Many consumers are also pleased with the fact that in the process of opening and closing such systems do not make unnecessary noise or squeaks.
• Modern manufacturers produce sliding structures of various sizes, so you can choose the right option for any conditions.
• As a rule, more than one door leaf can be installed in such a system. It all depends only on the dimensions of the direct opening and the type of canvases.

Based on the above list, we can conclude that sliding doors are an excellent solution for a wide variety of areas and layouts, as they have many positive qualities.

However, like any other designs, they also have some disadvantages.

• Many psychologists believe that the main disadvantage of sliding doors is their relative novelty. Most consumers are accustomed to traditional swing options, and it is not so easy for them to switch to more modern canvases.
• Because of this, another problem arises associated with the installation of such structures. It is not too complicated, but often users are faced with ignorance of all the nuances regarding such work.
• Despite the huge range of sliding doors, most of them still have a high cost, which upsets many consumers.

• It is also worth noting that sliding canvases do not provide sufficient noise and heat insulation. In this matter, these designs are much inferior to classical specimens.
• Many users are faced with the problem of accumulation of dust and dirt in the niche, which is necessary for installing doors. Moreover, these areas are quite inaccessible, and it is not easy to clean them.
• There is also the possibility that one day the mechanism in such systems will fail and jam. First of all, this can happen if the rollers in the structure are beveled. To avoid such problems, experts recommend purchasing only high-quality and not the cheapest options.

Whether these shortcomings of sliding canvases are significant or not, each person decides for himself. Fortunately, modern manufacturers produce many beautiful and durable canvases of different variations, so even the most demanding owner can choose the best option.

Constructions

In all designs of sliding doors, the following necessary components must be present.

• Guides (or rails).
• Locking mechanisms.
• Cloth movement limiters.
• Roller systems (in other words, rollers).

rails

These details are among the most important in the design of sliding doors. Without them, it will be impossible to open and close the canvases and move them to the side. Rails for sliding structures are made from a steel, aluminum or metal base.

The rails in the sliding structure are single and double. They can be installed both at the top and at the bottom of the opening. The upper parts are attached to the ceiling, and the lower parts are attached to the floor covering.

Stoppers and limiters

These components do not have a special effect on the condition and operation of sliding systems, but they perform an important function, which is to prevent the door leaves from hitting the walls. Also, these elements help to avoid arbitrary closing of the canvases.

Roller systems

In sliding structures, they are represented by upper and lower rollers. Upper roller carriages can also consist of several wheels at once. In different versions, they can be installed from 2 to 8 pieces. It all depends on the weight of the canvases. As a rule, rollers in a sliding structure are arranged symmetrically, but an asymmetric arrangement is also found.

Types of sliding systems

There are several different types of sliding door leaf systems. It is worth taking a closer look at them.

Telescopic

This mechanism is installed on a sliding structure, in which there are two or three door leaves moving in one direction. In this case, the shutters, combined with a synchronizer, are located on two rails that are parallel to each other. This option is not the easiest, if we consider it from the point of view of installation.

It should be borne in mind that the telescopic type of extension is extremely rarely used for canvases made of glass.

This mechanism can also be called synchronous, since it has a non-standard structural structure, in which both wings open synchronously. Often in such variations there are hooks or special synchronizers, with the help of which the first leaf, when moving, pulls the next one along.

As a rule, structures with telescopic systems are installed in fairly wide and spacious doorways. If you correctly install a system with several doors, the interior will become more original and stylish.

barn

Barn mechanisms can be attributed to suspended ones, since in them the main load falls on the upper rails. During opening or closing, doors with such mechanisms do not touch the floor covering. These designs have an attractive appearance, so they are chosen by many buyers.

coplanar

Door leaves in such mechanisms are installed in two or three rows and, when closed, form a single line, closing the guide rails. Coplanar blades work on the principle of sliding doors and move along their dedicated rail. Similar designs also apply to hinged ones, and it is not recommended to install too heavy sashes in them.

Hidden

Today, many consumers choose doors that have an invisible mechanism. As a rule, he hides behind a false panel. Otherwise, such structures are called "coupe" or "tram". They are installed without an additional threshold, and their supports are attached to the upper section of the canvases.

Experts say that the installation of such systems is best done at the stage of construction or repair work in a dwelling. This is due to the fact that canvases with reduced mechanisms are installed in the inner part of the walls. If their thickness is not enough, then a kind of pencil case is often made.

After such work, the walls repeat the thickness of the pencil case. It is worth noting here that the hidden mechanism should in no case be used if you install glass sheets.

swivel-sliding

Cloths equipped with such a mechanism are called roto-doors. Such sashes can be safely attributed to hybrid designs, as they combine the characteristics of traditional swing products and the functionality of sliding options.

Such models consist of only two components: guides and roller systems. The slotted rail is attached to the upper part of the doorway, and the roller mechanism with swivel joints is moved by the wheel base into the rail slots.

In the lower part of such canvases, a special lever element is installed, which is combined with the upper half of the wheel base with the help of an axle.

Such bases are not designed for the installation of two or three canvases. As a rule, there is one roto-door in one opening. Roto-models with a rotary-sliding mechanism can be safely called universal, as they function perfectly in both spacious and compact doorways.

It should be noted that such mechanisms will work properly only if the system contains canvases made of light materials.

shut-off

Interior sliding doors may have various locking mechanisms.

• Simple mechanical lock. In such cases, a special hook is used instead of the traditional crossbar. It protrudes from the lock case and enters the hole located on the second half. This part can be located directly on the door frame or on the second leaf.

• Electromagnetic lock. The operation of this option is based on a fairly powerful electromagnet. When you press a special button in the lock, the voltage is turned off, and the magnetic field ceases to be active, and the bolt snaps off. Such devices are enviably popular and have a large number of positive aspects, but their disadvantage is that they are much more expensive than simple mechanical devices and their operation is impossible without electricity.
• Electromechanical lock. Such options differ from the above in a different principle of operation. However, like electromagnetic locks, these devices require electricity to operate. The electromechanical lock is controlled by a remote control.

materials

Modern sliding canvases are made from different materials.

• Copies are rightfully recognized as the highest quality and environmentally friendly from natural wood. It can be products from solid oak, walnut, alder, maple, birch, pine or cedar. These canvases are quite expensive, but they serve for a very long time and do not harm human health, since they do not emit hazardous substances even under the influence of high temperatures.

However, it is worth considering that wooden specimens must be regularly looked after and coated with protective compounds, otherwise they may dry out, crack and lose their fresh appearance.

• Canvases are cheap and common from chipboard or MDF. As a rule, such canvases have a simple and patterned design. They are distinguished by long service life and wear resistance. But we must not forget that chipboard is a toxic material, because it contains formaldehyde resins. If you do not want to harm your health, then it is better to purchase doors made of E-1 class chipboard or veneered options.

• Sliding doors look elegant and beautiful in the interior from glass. It is recommended to buy models made of hardened canvas, as they are more durable and wear-resistant. Not all sliding mechanisms are suitable for doors made of frosted or transparent glass. For example, hidden systems in such products cannot be installed.

• The lightest are canvases made plasterboard. This material is easy to process and can be finished with wood paneling, plaster, paint, tile and even wallpaper. By itself, drywall is not the most durable and wear-resistant material, it is very easy to damage.

How to choose a good one?

Modern consumers are faced with a chic selection of sliding interior doors with various designs and mechanisms.

To choose a good option that will last as long as possible and will not cause any problems during its operation, it is worth doing the following.

• First you need to decide on the type of sliding mechanism that will be most convenient for you to use. Most often, consumers choose the telescopic option, as it is suitable for a large opening. Also, all types of hinged structures look very attractive in the interior, but they should not be overloaded with too heavy doors.
• Hidden options look more aesthetically pleasing, in the installation of which they often use a special pencil case that increases the width of the walls. However, it is worth considering that this design is not suitable for inset mirror doors.
• For doors made of lightweight materials, you can use not only telescopic, hidden or synchronous mechanisms, but also turn-sliding systems. In the latter, there may be only one door leaf.

• Also, when choosing sliding doors, you need to pay attention to the materials from which they are made. The most short-lived are drywall models, and canvases made of solid wood can boast of unsurpassed quality. These designs can be installed in the interior of a variety of styles, whether it is timeless classics or retro.
• Do not save on the purchase of such systems. Low-quality and overly cheap sliding doors will not last long. Often these structures fail due to the misalignment of the roller system.
• Contact only leading and well-known brands that produce quality structures with sliding mechanisms. Such products will delight you not only with a long service life, but also with a thoughtful appearance, which, as a rule, is worked on by experienced designers.
• When choosing a sliding door, do not forget that it must fit into the interior design in which it will be located. Also, the canvas should echo the furniture in the room in color and style.

A sliding door today will not surprise anyone. Sliding structures are easy to meet everywhere. They are used for any type of doors, including glass and metal, but are more often used as interior doors and wardrobe doors.

In most cases, cabinets are assembled and installed by hand. The assembly and installation scheme is not very complicated. It is important to choose a quality sliding mechanism and strictly follow the chosen scheme.

Advantages and disadvantages of sliding structures

The main advantages of using a sliding structure are the following:

• Space saving.
• Ease of installation, which allows you to install them yourself.
• No need to mount the box.
• Noiselessness, reliability and durability of work.
• Reducing the risk of injury.
• Possibility of installation of dense any size and automatic control system.

The disadvantages include low tightness and the need to install a canister (in some cases).

Sliding door types

Sliding doors are different from sliding doors. The latter can be folding, in which the wings are folded into an "accordion" or "book".

Retractable structures differ in the ways of opening and the number of wings.

• Sliding doors. One or two sashes move along guides parallel to the wall in one or opposite directions. They are also used in Versailles compartment systems.
• Cassette. The difference from the first is that the doors are hidden in a pencil case when opened. It is made by hand from drywall, other materials, or purchased complete with a sliding structure.
• Radius. They differ in their original shape, determined by the curvature of the guides.

• Cascading. Each sash has its own guides. There are one stationary and several movable canvases.
• Intra-hole. The device assumes an option when at the moment of opening the two doors move towards each other, and only part of the opening remains for the passage

Rollback system design

Depending on the weight of the canvas, the sliding mechanism may have a different design. In a simplified form, the sliding door mechanism consists of the following structural elements:

• Guide with roller carriages. The number of these elements may be different for different types of doors. Made more often from thick-walled aluminum profiles, they are used to fasten leaf flaps in them. Inside the rails, polymer rollers on bearings are installed, which provide the necessary smoothness of opening. Attach to wall, floor or ceiling.
• Limiters or locking mechanisms. Used to hold the sash in the guide.

Types of sliding systems

Depending on the implementation of the constructive idea, retractable systems can have several guides. More often one or two. The location of the support rollers can also be different:

• Up. This is a hanging system. The suspension of the web is carried out only to the upper guide. The load is distributed only on the upper rollers, and the door is opened without touching the floor.
• Down below. This is the support system. All load falls on the bottom rail. The top hanger is not used.

The mechanisms themselves for execution and purpose are divided into the following:

• Standard. This is the simplest and most common option, which does not cause difficulties when installing with your own hands. As a rule, thresholdless.

Designed for a maximum load of 40 to 120 kg, it has bearings in the design.

• Open type. It is called so because all structural elements are visible. The suspension is designed for a door with a leaf weighing up to 100 kg. Let's do-it-yourself installation of a pencil case.
• Hidden type. Structural elements are hidden behind the sash leaf. The bottom guide is not used. Not recommended for glass doors. Due to its simplicity, do-it-yourself installation is allowed.
• With a conductor. A special device ensures smooth movement of the valves. The closer is installed on any type of door and can work in both directions of movement of the wings.
• Synchronous. The mechanism provides synchronous opening of the wings in different directions. Designed for doors weighing no more than 80 kg. Additionally, the kit includes tension rollers, cable, fasteners and hooks. Do-it-yourself installation is not recommended due to the complexity of the work.
• Telescopic. The mechanism provides opening of shutters in one party. There are two parallel rails on which doors are suspended, connected by a synchronous opening device. Suspension of up to three wings is allowed.
• Rotary. This is a new type of mechanism for interior structures. It has the advantages characteristic of sliding, pendulum and swing doors.

What is needed for installation

Do-it-yourself sliding mechanisms are installed on the door using the following tools and components:

• Drill, screwdriver, screwdrivers.
• Fasteners - self-tapping screws, dowels and screws.
• Roulette.
• Pencil.
• Aluminum profile. For the standard Versailles design, it is enough to purchase a two-meter bar. The selection of the length for the individual dimensions of the openings is carried out using calculations that can be found on the network.

• Wooden beam. One or two according to the number of upper guides. The thickness is chosen according to the thickness of the canvas, taking into account the dimensions of the mechanism. Usually - 4-5 cm.
• Limiters. The number of restrictive brackets must correspond to the number of rails multiplied by two.
• Guides. The slats should be even, and the material durable and lightweight.
• Rollers with carriages. The retractable block is the most important part of the system. The service life and functionality of the entire system depends on its reliability and quality. This must be taken into account when choosing.
• Decorative caps.

After preparing all this, proceed to installation on the sash. Installation can be carried out both on their own and with the involvement of specialists.

Mounting

The scheme and installation order are as follows:

• The first step is to mark the position of the guides. The rails are installed 15-20 cm above the door, taking into account the height of the roller mechanism. Height is measured from the floor. Horizontal lines are drawn on the wall, which are checked by the level.

Irregularities can lead to spontaneous rollback of the wings, especially when installing the Versailles compartment system.

• Then a beam is attached under the guide rails. It is mounted above the drawn marking lines. Dowels are used.
• Guides are attached to the beam. Sometimes they are placed directly on the wall. Be sure to make a small gap between the wall / beam so that the sash does not touch it. The length of the rail must exceed the width of the widow opening.

• A block of roller carriages with fasteners is inserted into the rails.
• Brackets are installed to lock the roller mechanisms. They are placed 5 mm from the edge of the canvas.

On the video you can see the installation of the mechanism with your own hands:

• Next, the canvas is screwed to the brackets with screws. When installing the Versailles compartment system, special attention is paid to the absence of gaps. In the Versailles system, they often already appear due to the synchronous movement of the rollers.
• Plugs are put on the rails from the ends, and the sliding block is closed with platbands or decorative strips.

Installation of a sliding structure and an automatic control system is not so complicated. If there are skills, the scheme is observed, then any uninformed person can put the sliding block with their own hands.

The quality of components is important. Each element plays a role - a sliding block, a guide, a suspension, a stopper and even screw connections. Italian products of high quality are very popular. They provide exceptionally easy movement of the leaf and tight closing of the wings.