Lizun from shampoo and water. How to make a slime at home: the easiest and safest ways. Way. We make slime from plasticine

Slime is an amazing and slightly strange toy. In fact, it is just a lump of elastic substance. But kids love slimes because they can be crushed, squeezed, pulled, twisted, thrown, and smeared. And after all these actions, the slime, as if nothing had happened, returns to its previous form. Even dirty traces, to the delight of parents, will not remain from such a toy.

Where did the slime come from?

For the first time, a batch of slimes was released by the American company Mattel back in 1976. The toy gained immense popularity eight years later, after the "Ghostbusters", where the character Lizun was.

Since then, many have tried to make slime at home, and quite successfully. Instead of guar gum, craftsmen and inventors used a variety of substances. A homemade slime will come out not quite the same as a purchased one, but it will definitely have “fluid” properties.

What do you need to make it at home?

Thick slime recipe with PVA glue

Dry borax should be dissolved in a glass of water. You can use a ready-made tetraborate solution, then you do not need to mix it with water. In another cup, mix the remaining water (a quarter cup) with one fourth cup of PVA. Add dye. While stirring the adhesive mass, gradually pour half a glass of borax solution into it. It remains to knead this jelly-like mass well - and a wonderful do-it-yourself slime is ready! The process is shown in more detail in this video.

Recipe based on shampoo and glue, without sodium tetraborate

It happens that there is no borax in the house, but you don’t want to go to the pharmacy to get it. The previous recipe has a popular alternative. Lizun without sodium tetraborate can be made using ordinary shampoo and Titan glue. Only this brand of glue is needed.

For three parts of glue, two parts of shampoo are taken. It is best to mix the shampoo slime in a plastic bag. When the mixture thickens, try what happened. Sometimes you have to add more glue.

Another slime recipe without PVA glue contains plasticine at the base. You will need plasticine of any color, gelatin powder, half a glass of water.

1. First you need to prepare the jelly, following the instructions on the pack. Pour it still warm and warm into a clean, separate bowl.
2. Boil 50 ml of water and switch the stove to low heat.
3. 100 - 120 grams of plasticine should be broken into pieces and gradually thrown into the water. Stir constantly.
4. When the plasticine has completely melted, gelatin will need to be added to the mass and stirred again.

Making a plasticine slime is easy, but the craft will last a maximum of two days. Plus, it will get your hands dirty. If you want to sculpt from any elastic substance, it is better to buy ball plasticine.

Many people want to learn how to make a slime without using glue. There is a way, but it is not simple. Mandatory ingredients are polyvinyl alcohol (in dry form), a glass of water, a couple of tablespoons of borax.

Polyvinyl alcohol in powder can sometimes be found under the name "Antimelitel". He meets on construction markets, in a chemical store, sometimes in haberdashery (used for dyeing fabrics).

To make a slime according to this recipe, you need to do this:

1. Alcohol powder is poured into an iron dish, put on fire.
2. Alcohol is brewed for 40 - 45 minutes. It needs to be stirred frequently. After cooking, the dishes are cooled.
3. Then you need to dissolve the dry borax powder in warm water. The crystals should dissolve within 20 minutes.
4. For three parts of polyvinyl alcohol, one part of the borax solution is taken. The mixture will soon turn into a slime.

You can tint the slime, add for smell essential oil. The licker will be durable and cute.

other methods

There are several ways to make slime at home. They are low-cost, but the resulting toys do not look very nice and are not stored for long. For example, liquid slime can be made from baking soda or starch. It will harden on the third or fourth day.

But without water and glue, it will not be possible to make a slime. You need at least one of these components. It is impossible to make a slime toy out of paper, because it does not have flexibility. Only the image of the same Lizun from Ghostbusters can be paper.

But to create a slime that glows in the dark, everyone is quite capable. To do this, you just need to add to regular composition fluorescent paint. It is sold in craft stores.

How to make a slime - 10 ways to make at home

Lots of kids love slime play - easy fun for all ages. Slime toys became popular after the release of a cartoon about the adventures of ghost hunters, one of whose characters was Slimer, a constantly changing shape, spreading and stretching strange creature. Another name for this toy is handgam. How to make a slime at home, we will learn today

Lizun is great fun for kids

Slime is not only a great entertainment for children, but also helps to relieve stress, has beneficial effect on the nervous system Helps develop small hand muscles and motor skills. The toy has a gel-like consistency, does not melt and can take the most bizarre shapes. You can buy a slime in any children's toy store, but it's not difficult to make it yourself or with the help of a child at home. Making a slime does not take much time and does not require the presence or purchase expensive materials, tools. Consider affordable and not very complicated options for creating this interesting toy.

How to make slime at home

If there are children in the house, there will definitely be plasticine. Use it to make a popular toy - the result will impress!

• plasticine - 1 pack:
• food gelatin - 1 pack;
• spatula (spoon) for mixing components;
• container (bowl, jar) for kneading;
• iron container for heating gelatin.

Cooking method:

1. Pour gelatin into an iron container and pour it cold water. Mix thoroughly and leave for an hour. After the specified time has elapsed, heat the soaked gelatin, bring to a boil and quickly remove the dishes from the stove.
2. We take a mixing container (it is better if it is plastic) and, using a spatula, knead soft plasticine (100 g) very well with water (50 ml).
3. Carefully pour the prepared gelatin into the resulting plasticine mixture, mix with a spatula until a homogeneous, plastic mass is formed.
4. Place the container with the resulting mass in the refrigerator and wait for complete solidification.
5. We take it out of the refrigerator and use it for its intended purpose!

Video on how to make slime from plasticine

This method is a godsend for those parents who, when choosing toys, first of all put in the first place the maximum safety, complete environmental friendliness of materials for manufacturing. This option is also ideal for the smallest fans of games with slime.

Required materials and tools:

• warm water;
• starch (potato or any other);
• container for mixing components.

Cooking method:

1. Place in the prepared container warm water and prepared starch in equal proportions.
2. If we want to get a multi-colored toy - add a small amount of food coloring, brilliant green, a solution of potassium permanganate or others colorants that are safe for children.
3. Thoroughly knead the mass until it becomes plastic and elastic. It is better to knead with gloves to prevent staining of hands.

Such a slime will stick perfectly to surfaces of any type, but it also has a drawback - it is not able to bounce and spring. So, before manufacturing, it is better to ask the future user whether the characteristics and capabilities of an environmentally friendly starch slime will suit him.

Has the house been recently renovated and do you have leftover construction adhesive? With the help of the available components, we will turn them into a toy for the kids!

Required materials and tools:

• shampoo;
• construction glue ("Titan", "Ecolux" or other);
• food coloring;
• thick plastic bag;
• container for mixing components (plastic bowl):
• spatula or mixing stick.

Cooking method:

1. Pour a small amount of shampoo into the prepared container.
2. Pour building glue into the shampoo - there should be more of it than shampoo.
3. Add a drop of food coloring (if you need a rich color, you will need more coloring).
4. Thoroughly mix all the ingredients with a plastic spatula or stick.
5. Pour the mixture into a plastic bag.
6. Thoroughly knead the mass in the bag so that it is evenly colored and turned into a plastic substance.
7. We take out the slime from the package and we can immediately play with it!

Store a toy prepared in this way in a sealed container in the refrigerator. After playing with the shampoo and glue slime, the child should wash their hands well.

This method requires the purchase of special ingredients. But believe me, the result is worth it!

Required materials and tools:

• any food coloring, brilliant green, iodine, gouache paints;
• PVA glue, always fresh, in the amount - 100 gr .;
• borax solution (4%) or borax (sodium tetraborate) - these components can be purchased at a pharmacy, specialized stores selling chemical reagents.
• water;
• jar or glass;
• polyethylene bag for kneading.

Cooking method:

1. Take water room temperature(about 1/4 cup).
2. Slowly pour PVA glue into a container of water, mixing gently. If you need a more elastic slime, then take a little more glue.
3. Now it's time to add sodium tetraborate - if a solution is used, then one vial is enough. The powder must first be diluted in water at the rate of: a tablespoon of borax per 100 ml (half a glass) of water.
4. While constantly stirring the mixture, carefully add the dye.
5. We transfer the resulting mass with the dye into a bag and knead well until it turns into a slime of the proper consistency.

Slime prepared in this way is practically no different from a store toy.

Video on how to make slime from pva, sodium tetraborate and water

Every housewife has soda in the kitchen, why not use it to make slime? Just a few additional ingredients - and the original toy for the child is ready! the only drawback of such a slime is its fragility, a soda toy will last only a few days.

Required materials and tools:

• baking soda - a tablespoon with a slide;
• PVA glue - 50 gr.;
• warm water - 1/2 cup;
• food coloring - a few drops;
• spatula for mixing components;
• plastic containers - 2 pcs;
• latex gloves.

Cooking method:

1. In a plastic container, dilute PVA glue (50 gr.) In warm water (1/4 cup).
2. Add a few drops of dye to the glue water.
3. In a separate bowl, mix baking soda (1 tablespoon) with warm water(1/4 cup).
4. Slowly pour the soda solution into the water-glue solution, stirring constantly, waiting for the mass to compact.
5. Thoroughly mix the resulting substance - this is the slime!

To prepare such a slime, you will need liquid washing powder, it is not recommended to replace it with a dry one.

Required materials and tools:

• washing powder (liquid);
• PVA glue;
• dyes;
• rubber gloves;
• a bowl for preparing a mixture of ingredients.

Cooking method:

1. Pour the glue into the bowl (it will take about a quarter cup).
2. Add a few drops of dye and mix well.
3. Now pour in the glue with the dye liquid powder for washing - about 2 tablespoons, stirring constantly.
4. Put on gloves and continue kneading the mixture with your hands (like dough). The consistency of the kneaded mass should be similar to soft rubber, stretch well and take various forms.

Was there no starch in the house? No problem! It will be completely replaced by ordinary flour - be sure to sift it before using it so that there are no lumps that can ruin the slime.

Required materials and tools:

• water (hot and cold);
• any food coloring;
• flour (grade does not matter) - about 2 full glasses;
• utensils for preparing a mixture of components;
• spatula or spoon.

Cooking method:

1. Sift the flour through a fine sieve into a mixing bowl.
2. Add cold water (1/4 cup), mix well.
3. Add 1/4 cup hot water(but not boiling water!).
4. Stir the mixture until it thickens.
5. If desired, add dye.
6. Send the mass to the refrigerator, where it will spend 2 hours.

When specified time will pass, take it out of the refrigerator and give it to the kids to tear to pieces - they will appreciate the quality and functionality of the resulting toy!

A toy prepared according to this recipe will look more like a jumper than a slime, since its consistency is much denser.

Required materials and tools:

• hydrogen peroxide (usual pharmacy);
• water - 100 gr.;
• PVA glue - 100 gr.;
• soda or starch - 100 gr.;
• container for mixing ingredients;
• spatula.

Cooking method

1. Mix starch or soda with water in a prepared container.
2. Pour in the PVA glue and mix, after adding the dye.
3. Add a little hydrogen peroxide - the mass will become light, airy.
4. Continue kneading until a homogeneous, tight mass.

To prepare this slime, you will need a special alcohol - polyvinyl. In no case should you replace it with medical alcohol or vodka! Also in the composition of this recipe is the already familiar sodium tetraborate.

Required materials and tools:

• powdered polyvinyl alcohol;
• water;
• sodium tetraborate;
• container for mixing components;
• scapula.

Cooking method:

1. Dilute powdered polyvinyl alcohol with water according to the instructions, cook over low heat for about 40 minutes. The mixture should be constantly stirred to prevent burning.
2. Mix sodium tetraborate (two tablespoons) with one glass of water, achieving complete dissolution.
3. Strain the resulting sodium tetraborate solution and slowly pour it into the polyvinyl alcohol.
4. If necessary, add dye and knead the resulting mass thoroughly.

Do you want to surprise the kids by making them a slime that glows in dark room, and even attracted by a magnet? Get started!
Required materials and tools:

• iron oxide;
• sodium tetraborate
• ordinary water;
• phosphor paint or dye;
• PVA glue;
• magnets (neodymium),
• utensils for mass preparation.

Cooking method:

1. Dissolve 1/2 teaspoon of sodium tetraborate in a glass of water.
2. In the prepared container, mix PVA glue (30 gr.) And 1/2 cup of water. Add phosphor paint to this mixture (it is it that provides glow in the dark) or a regular dye to add color.
3. Pour the sodium tetraborate solution into the water-adhesive mixture in a thin stream, constantly stirring the mixture to the desired consistency. As soon as the required mass density is reached, stop adding the solution.
4. The slime is already ready, now it is necessary to make it so that it is attracted by a magnet. To do this, level the mass and sprinkle with a small amount of iron oxide powder. Knead well so that the powder is evenly distributed throughout the mass.

Slime is ready!

1. Try to find the ideal consistency of the mixture being created, focusing on your own feelings. A properly made slime is one continuous clot, a homogeneous mass, moderately viscous and sticky.
2. If you feel that the mass does not meet expectations, add the component necessary to correct the situation in more. If the mass is liquid, dry components should be added, if, on the contrary, it is thick, then dilute the mixture with water or glue.
3. To give the slime a more original appearance, you can add sparkles, mother-of-pearl powder dyes to the prepared mass.
4. Cooked slimes should be stored in a tightly closed container, placing it in the refrigerator.
5. It is necessary to warn children that it is impossible to lick lickers, bite them, no matter how much you would like to.
6. Wash your hands well before and after playing with slime.

Be sure to try making slime at home with your kids. Bright, original handgam is great fun for the whole family! Have fun and have a good time with the kids!

After the release of the fantastic film "Ghostbusters" in the United States, clever manufacturers of goods for children decided to earn extra money on the popularity of one of the characters and put a toy called a slime on sale.

This is a sticky jelly-like substance that can change its shape, stick to any surface and slide down funny. vertical wall. The game quickly won the love of kids and appeared on the shelves of children's stores around the world.

The popularity of the original fun has long surpassed its on-screen prototype and still causes genuine delight of the children, even those of them who have never watched a famous movie. Now the slime has several names - “liquid plasticine”, “gum for hands” or just handgam.

Creating it yourself in 5 minutes is not difficult. For those who want to have fun with their child, we will tell you a few simple ways how to make a slime with your own hands.

At industrial production hendgam, it contains chemical components that can adversely affect the health of the child. Cause allergy or poisoning if ingested. At home, it is better to use available ingredients that are safe for the health of the baby.

The easiest way to make slime without sodium tetraborate is to use baking soda and dishwashing liquid:

1. In a bowl, mix dishwashing liquid and baking soda. Add dry and liquid parts until the composition becomes thick and sticky.
2. If the result is too dense, you can add water. But be careful with the dosage, otherwise you will have to add chemistry and soda again.
3. In order for the slime to acquire color, drip food coloring, dissolving it in a small amount of liquid.

Note! To make a slime according to such a simple recipe can even Small child, but you do not need to leave him alone for this activity. Remember that you should not allow the baby to come into contact with household chemicals on their own.

There are many options for replacing tetraborate in the manufacture of “gum for hands”. Want to experiment and make your own slime at home? We'll show you how to do it step by step.

How to make slime from plasticine?

To make a bright and relatively durable toy, use ordinary children's plasticine, a little edible gelatin and plain water:

• Soak a bag of gelatin in a glass of cool water. Better do it in metal utensils, because when the gelatin swells, it will need to be heated on the stove.
• Bring the mixture to a boil and remove from heat. Cool until warm, stirring constantly with a spoon so that the gelatin does not freeze.
• Heat up a block of plasticine in a water bath until it becomes as soft and viscous as possible.
• Combine gelatin and slightly cooled plasticine.
• If necessary, add water to better combine the components.
• Stir with the plastic spatula from the sculpting kit until the mass is smooth.
• Until completely cooled, place the "gum for hands" in the refrigerator in a closed container.

How to make a slime out of toothpaste?

A very simple way, which produces a soft and pliable mass, which is so interesting to play with:

• Dial a full tablespoon of toothpaste and the same amount of liquid soap.
• Mix the ingredients in a small bowl and add five tablespoons of flour.
• The proportions can be changed depending on the density of the components.
• Stir until you get the desired consistency.
• Moisten the finished slime with water - so it will keep its shape better.

Advice! All varieties of toys, regardless of composition, should be stored in the refrigerator in a closed container. This is necessary, since at room temperature the slime can quickly become unusable.

How to make slime from starch?

You will need potato starch, PVA glue, dye and water:

• Add enough starch to 100 ml of warm water to make a thick mixture. Do not forget to mix vigorously, otherwise lumps may form.
• Pour in PVA glue. Mix thoroughly again.
• To add color, you can add a couple of drops of food coloring. If you do not do this, you will get a toy of a beautiful milky shade.

Advice! To prevent the mass from sticking to the dishes and for better kneading, transfer the composition to a tight plastic bag.

How to make a slime out of washing gel?

If you use a thick liquid gel to wash clothes, you can also use it to make a “homemade” handgum:

• Add a small amount of dye to a quarter cup of liquid stationery glue and mix with a plastic spoon.
• Pour 50 ml of washing liquid there.
• Mix and knead until the mass becomes elastic.
• Store in a bag at a low temperature.

Advice! To ensure that the components of the composition do not stain the skin and do not stick to your hands, use rubber gloves.

How to make slime from soap and boric acid?

Do you have a solution of boric acid at home and laundry soap? These are the main components for a dense "liquid plasticine" with excellent viscous properties:

1. Using a knife, gently cut the soap into thin sheets. It will take about 1/4 of the whole bar.
2. We make a soap solution by pouring chips with 50 ml of hot water.
3. Pour in one teaspoon of boric acid solution.
4. Add clerical glue, which contains silicate.
5. Knead the mass until thick and knead finished material hands using protective gloves.

How to make a slime from sodium tetraborate with your own hands?

Do you want to get a toy "like from the store"? Then you can not do without sodium tetraborate. This complex name hides the usual borax, which can be easily purchased at any pharmacy.

Here is a simple recipe for making real liquid clay at home:

• Place 30 ml of pva glue into a plastic container.
• Pour half a teaspoon of borax powder there and mix thoroughly.
• For elasticity, add a few drops of glycerin.
• Stir until thickened, then remove the lump from the container and continue kneading with your hands.

This is basic recipe handgam. You can diversify it:

• By adding dye - to give bright color desired shade.
• Pouring in silicate glue, instead of PVA, you get a toy of a delicate transparent look.
• Replacing glue with polyvinyl alcohol is a more difficult option, but the result will most closely resemble a purchased counterpart.
• Instead of the usual dye, you can add fluorescent paint, and the slime will glow beautifully in the dark.
• By pouring finely dispersed magnetic powder, you will make a magnetic handgam that can attract small metal objects to itself.
• If you want the slime to not only look beautiful, but also have a pleasant smell, drip a liquid flavor, such as vanilla extract, which is used for baking.

Note! When making "chewing gum" with alcohol, remember that the toy can ignite if it gets into an open fire. Be careful and follow the safety rules.

What to do if the slime does not work?

Despite the fact that preparing hendgam is quite simple, in this matter, like in any other, experience and skill play a big role. The correct slime should be a homogeneous, plastic mass that easily changes shape and does not stick to your hands. There are two difficulties that beginners face when trying to make "liquid clay" on their own. Let's look at what these problems are and how to solve them.

A fun toy not only for have fun. "Liquid plasticine" develops well fine motor skills hands, helps to cope with attacks of aggression, calms the nervous system of the child.

And this fun also has an applied application - if you run a well-kneaded sticky material over a computer keyboard, you can easily remove all dust and small dirt from it between the buttons.

Useful video

Similar posts

If your child is tired of playing with his old toys, and he asks for a new one, it is not necessary to immediately run to the store to please the baby. After all, there is a great toy that will keep him occupied and help develop motor skills. Slime is such a toy - it is a jelly-like substance that can entertain both you and your child, and most importantly, you can make a slime with your own hands at home from various materials. There are a huge number of ways to make it, and in this article we will tell you 10 ideas on how you can make a slime with your own hands from improvised materials at home.

Lizun without sodium tetraborate with detergent

If you have no time to run to the pharmacy, and the slime needs to be made right now, then this manufacturing option will suit you. This version of the slime appearance and to the touch is as similar as possible to the purchase. But since such a slime contains a detergent in its composition, you need to wash your hands after use.

You will need:

• Dishwashing liquid
• Mixing container
• Hand cream
• Dye

Working process:

1. First, mix dishwashing detergent and baking soda in a ratio of 1:2. Mix thoroughly.
2. Now add hand cream and mix. The amount of glue must be determined during the mixing process.
3. And add dye.
4. When all the ingredients are thoroughly mixed, the mass should turn out to be a little liquid consistency.
5. Put our not quite yet ready slime in a bag and put in the refrigerator for 4 hours.
6. At the end of time, we take out the slime.

Slime from nail polish

Another version of the slime, which is made from ingredients that every housewife has. It turns out a bright color and the shade practically does not change during the preparation of the slime. Let's see how to make such a bright and simple slime with your own hands.

You will need:

• Colored nail polish
• PVA glue
• Mixing container
• Sodium tetraborate

Working process:

1. First, we combine two components: glue and nail polish. Mix thoroughly.
2. Now add water at room temperature in the proportion of 1 part glue and 1 part water. We mix.
3. Now you need to gradually add sodium tetraborate, stirring our mixture. We add not immediately in order to see what consistency we get, softer, or harder.
4. When you mix everything thoroughly, you will see that the slime itself is formed into one mass. All slime is ready!

Lizun from titanium glue

The simplest slime in composition can be made from regular glue titanium and water. It turns out plastic, but it looks like a dense viscous mass. It is good to use it for very young children, as its density does not allow it to tear at the slightest load. And now let's see how to make the easiest slime.

You will need:

• Glue "Titan"
• Paints
• Mixing container

Working process:

1. Pour the glue into the container and mix with the dye.
2. Now add water to the mass, in a ratio of approximately 1: 1.
3. Stir the solution until our slime stops sticking to your hands.
4. Slime is ready!
5. For good example you can watch the video instruction.

Edible Slime from Nutella

If you want to please your child with more than just an original toy, then you can make an edible slime. It is made from regular nutella and marshmallows. But it takes a lot of patience to make it. So, let's get started.

You will need:

• Pasta Nutella
• marshmallow marshmallow
• Mixing container

Working process:

1. Calculate your portion by calculating the composition. For 1 tablespoon of nutella you need 2 marshmallows.
2. We need to melt marshmallows in the microwave, stirring, you will get a mass similar to shaving cream or foam.
3. Now mix marshmallow with nutella, mix thoroughly. It will take a long time to interfere, but the result will please you. And most importantly, that such a toy can be eaten.

How to make an edible slime

Another option edible slime is to make it from mamba or frutela gummies. Such a slime is not durable, as it freezes when it cools. But it can be eaten and has a pleasant aroma.

You will need:

• frutela candy or mamba
• Powdered sugar
• Water bath

Working process:

1. Take all the candy out of the packages.
2. Put in a container and put on water bath. Melt all the sweets while stirring.
3. When the mixture has cooled slightly, transfer to a container in which powdered sugar was previously poured.
4. Roll the mass in powder until our slime stops sticking to your hands.
5. Now you can give your child our edible toy.

Video how to make slime from frutela

Jumping Lizun

If you want to make not just a slime, but at the same time also a jumper. It is very interesting to play with such a slime, and the ingredients that make up the composition are in almost every home. let's get a look Full description with step by step instructions.

You will need:

• Silicate glue
• Sodium tetraborate
• Dye
• sequins

Working process:

1. Pour glue and some dye and glitter into the container.
2. Next, add sodium tetraborate and mix thoroughly until our mass thickens.
3. Now you can try out your slime.

Transparent slime

If you didn’t have any dyes at hand, or you just want to make a transparent slime, then this recipe is for you. You can make it very simply and quickly, so let's start doing the slime with our own hands.

You will need:

• Silicate glue 125 ml.
• Water 250 ml.
• Sodium tetraborate

Working process:

1. Pour glue and water into a bowl and mix thoroughly.
2. Dissolve sodium tetraborate in 125 ml. water and pour into the mass with glue.
3. Thoroughly mix the mixture until the mass curls up and forms a slime.
4. Now you can give the child, or play yourself with this entertaining toy.

Magnetic slime

If you need an unusual slime, then you can make it magnetic. To do this, you need ordinary iron shavings and a magnet. So, let's get down to the process of making our slime.

You will need:

• PVA glue
• Boric acid
• iron shavings
• Magnet

Working process:

1. Mix the glue boric acid and iron shavings.
2. Stir for a long time until the consistency becomes like a slime.
3. Now you can play with such a slime with a magnet.

Lizun without sodium tetraborate

I want to offer you another option for making slime without the use of sodium tetraborate. This recipe uses only 3 ingredients, and one of them is a regular dye. Let's see how to make your own slime.

Provide your child with positive emotions by giving him a slime - a toy, the prototype of which is a ghost from the popular film of the end of the last century "Ghostbusters". Like that funny ghost, slim stretches, spreads and does not have a permanent shape.

Although this toy can be bought at any children's store, it is also easy to make it yourself. You decide what density and color to make slime. There are many options, without PVA glue. Let's take a look at a few of these below.

We make slime from detergents

How to make slime from shampoo without It's actually not difficult. To make it, you will need components that can be found in every home:

• shampoo;
• shower gel or dishwashing liquid.

First, select a container where you mix shampoo and (dishwashing liquid) in equal proportions. It is important that the products do not contain granules, then the slime will turn out to be transparent. After mixing until you get a homogeneous mass, and then put the container with the mixture in the refrigerator.

The very next day, the toy can be handed over to the child. But it is necessary to ensure that he does not pull the slime into his mouth, and after the game he washed his hands. This slime should be stored in the refrigerator in a closed container. Also, it should be thrown away when a lot of debris sticks to it. Because he loses his properties because of him. Besides maximum term its storage is one month.

flour slime

This is a relatively safe slime that is suitable for even small children to play with. Especially if you use natural dyes instead of food. Although in this case the toy will not turn out so bright.

Now let's look at how to make a slime without PVA glue and tetraborate. As for the previous recipe, you will need materials that any housewife will have at hand:

• flour;
• hot water;
• cold water;
• dyes.

How to make a slime without PVA glue? First, take a bowl or any other deep container. Sift two cups of flour into it, so the mass will be homogeneous and easier to cook. Next add cold water, and then hot, but not boiling water, about a quarter cup of each. Now you need to mix the mixture to a homogeneous consistency, it is important that there are no lumps in it.

Then you should add a few drops of dye: food or natural - it depends on your desire. Stir the sticky mixture again. Then put the container in the refrigerator for several hours. When the slime has completely cooled down, it can be handed to the child for the game.

Lizun from water

How to make a slime out of water without PVA glue? Consider another option for creating a toy. It is incredibly easy to manufacture and is considered the most environmentally friendly. For this you will need:

• warm water;
• starch (can be corn);
• dye.

Making a toy

How to make a slime without PVA glue? In equal proportions, mix warm water and starch until a homogeneous (no lumps) mass is obtained. Add the dye and mix thoroughly again, then form balls from the resulting mass. And now - the slime is ready.

It is important to remember that the water temperature should not be room or cold - then it is more difficult to knead the slime. In addition, do not put too much starch, because of this, the slim can become hard.

plasticine slime

How to make slime without sodium and PVA glue? There are many ways. Now let's get acquainted with the next of them. The advantage of plasticine slim is that it does not blur, retaining the look that you gave it. Use the following materials to make it:

• food gelatin;
• plasticine.

How to make slime without PVA? First you need a metal bowl. Fill it with cold water. There, dissolve the gelatin, in the proportion that is indicated on its packaging. Then leave it to infuse for an hour. After the specified time, put the bowl on the fire - the liquid should begin to boil. As soon as this happens, it must be removed from the fire.

Next, you need to warm up the plasticine in your hands (about 100 grams). Then you need to pour into plastic container water (50 ml). Then, using a spatula, mix it with plasticine. Now pour the gelatin into the plasticine and knead until you get a homogeneous mass. And the final stage of production - put the mixture in the refrigerator until it cools completely.

We figured out how to make a slime without PVA glue and starch, but it doesn’t always work out right away as it should. Therefore, we will further consider the options and reasons for why and what to do if the slim turned out to be wrong.

Naturally, a lot depends on the quality of the materials used in the manufacture of slime, their proportions are also important. In the recipes, they are indicated with approximately no accuracy, and therefore you have room for experiments with the consistency of the slime.

What to do if the homogeneity of the slime is broken? In this case, it is worth kneading it well for several minutes. After that, it will become viscous and homogeneous.

If it is too sticky - it reaches for the spoon with threads, and sticks to the fingers so that it simply does not lag behind - then the mixture needs to be thinned a little. Here a small amount or ordinary water will help you, depending on the method of making the slime you have chosen.

It may be the other way around, the mass stretches, but it does not stick to the fingers. The reason in this case is the excess fluid in the slime. If this happens, then you should drain the excess powder solution, starch or water. Or you can add some binder, such as flour. Then again knead the resulting mass.

A small conclusion

Now you know how to make slime without PVA. After you have made a toy, you should make sure that your beloved child does not throw a slime at the wall, otherwise they will remain on the wallpaper greasy spots. And from playing with slim on fleecy surfaces, the hairs will stick to the toy.

It is important to know that its shelf life is on average one and a half to two weeks. And between games, the slime should be stored in the refrigerator, but not in freezer. At the same time, do not forget to place it in a container and close it with a lid or in a plastic bag. This is done so that it does not dry out due to contact with open air.

Also, to extend the life of the slim, it can be wiped with alcohol, removing adhering debris. Do not wash it in the sink - you risk washing the slime down the drain. But if he began to lose his properties, just add a little water to it.

And the main thing to remember: always after playing with a slime, it is necessary to wash your hands and those parts of the body with which it came into contact with soap and water. So that the child does not have an allergic reaction.