How to lay tiles in the bathroom? Recommendations for the stages of laying technology

Choosing a tile is the best option for a room. Such work is necessary due to the fact that in such rooms there is always high humidity and materials are constantly exposed to temperature changes. Let's figure out how to lay tiles in the bathroom correctly.

Such a decision, how to finish the bathroom with tiles, is the right one, because the tile is environmentally friendly, so this coating meets all the requirements of hygiene. It also has good performance in thermal and waterproofing performance.

There are some general rules for laying tiles in the bathroom:

• The first thing to do before laying tiles in the bathroom is to carefully prepare the surfaces for work, as the final result will depend on this. To do this, all surfaces must be cleaned of old tiles, paint, and the surface of the coating must be perfectly leveled;
• Before you lay out the tiles in the bathroom, and when directly facing the bath itself, you need to decide where to start facing. Facing can be started either from the floor or from the walls. Many professionals recommend that you always start with floor tiling, based on the fact that the floor serves as an even base for further work, which will make it much easier to tile a bathtub;

• The application of the adhesive solution on the surface of the bath does not require any rules and requirements. It can be applied both on the tile and on the surface itself. The only rule to follow is the need to hold the tiles for 10-15 minutes before laying the tiles in the bathroom until the adhesive is dry;
• After the adhesive solution has been applied to the surface, the tile must be leveled and slightly upset with light blows of a rubber hammer. Before you make tiles in the bathroom and lay the next row, you need to use wooden crosses that will help even out the distance between the tiles themselves;
• If during the laying of the last row the full width of the tile does not fit, then it is necessary to cut it with a tile cutter, and only then we will carry out such a process as laying tiles in the bathroom;

• Once you have finished laying the facing tiles, after laying out the bath with tiles, you must carefully pull out the wooden crosses and grout the joints of the facing tiles. It must be done with a rubber spatula. As soon as the grout dries, use a damp cloth to wash off the remaining grout.
• How to tile a bathroom and what are the features? The process of laying tiles on the walls and on the floor is almost the same. The only difference is the use of different types of tiles. Nowadays, any hardware store can provide a huge variety of ceramic tiles that are rich in color shades and sizes. Therefore, any tile buyer will not have any problems when choosing it.

Such a process, how to lay tiles in the bathroom, is associated with some questions, namely:

• Always before buying a tile, you need to make sure that it is intact.
• Also, before you finish the bathroom with tiles, you need to buy tiles with a small margin. As you know, situations can be different - either the laying area is incorrectly calculated, or some tile elements may be defective.

Preparing walls for tiling

Preparing the wall is an essential part of the job before tiling the bathroom. It can be of different types, everything will depend on the material from which the house is built. It can be brick, concrete or wood. Therefore, the material greatly affects the preparation of the wall. In no case should the preparation of the wall be ignored, since the success of such a process as tiling a bathroom will depend on it - that is, all your work and the life of the installation.

If reinforced concrete material was used during the construction of the house, then before making a tile in the bathroom, it is necessary to use ground putty to level it.

To carry out such work, you must have all the necessary tools and a special putty, which is specifically designed for concrete surfaces. It can also be said that there is no need to perfectly align the walls, since this can be done with tiles.

If your house is made of bricks, then before tiling the bathroom, the obligatory process will be plastering the walls. Such a process is complex and rather capacious, which takes quite a lot of time. To facilitate this process, it is necessary to carry out a slight application of plaster, and then level the surface with moisture-resistant drywall. Only after carrying out all these stages, it is necessary to perform wall cladding.

The principle of leveling the walls of a house that is made of wood is the same as with brick.

The only difference is that before tiling the bathroom, it is necessary to apply a waterproofing material, as well as to treat it with an antiseptic.

The process of laying ceramic tiles

How to properly tile a bathroom? Laying tiles is the main job, so it requires special focus and attention. Even minor irregularities will be perfectly visible after work is completed.

So, we put the tiles in the bathroom. For finishing work, to install materials, you need the following tools:

• Tile;
• Special solution, which must be adhesive-based;
• Grout, which is necessary for seams;
• Notched and rubber spatulas;
• Building level;
• Rubber mallet, which is necessary for leveling the tiles.

How to lay bathroom tiles correctly? Finishing work should always start from the 2nd row. And the first row should be laid last (you can simply lay it, but you should not glue it together). If this is not done, then moisture can get on the floor, subsequently it will begin to flow into the cracks that form at the joints. Such problems can adversely affect the entire floor covering.

Preparation of glue and laying tiles on the wall

Preparation of the adhesive solution is a simple process. It is he who will help us fix the tiles. To do this, you just need to pour the glue powder with water and stir it until a homogeneous mass. To stir the adhesive solution, you must use a drill with a special nozzle. Such nozzles have peculiar blades that resemble a mixer.

In order to obtain a homogeneous mass of the adhesive solution and correctly lay the tiles in the bathroom, you must:

• Correctly calculate the mass. To do this, you need to read the instructions on the back of the package. It will also indicate all the necessary proportions;
• Correctly calculate the proportion of water and the adhesive solution itself. With the right selection, your tile will hold firmly and long enough. The adhesive must be applied to the wall surface with a notched trowel. After applying the adhesive, it is necessary to carefully place the tile and also carefully align it in the vertical direction.
• Mounting crosses will help you evenly set the gaps between each tile. Tiles on the wall must be laid horizontally along the entire wall.

Laying tiles on the floor

After you have completed the work of laying the tiles on the wall, you need to start laying on the floor. For this type of installation, it is necessary to use a special ceramic tile.

There is no need to rush with the installation. First of all, it is necessary to waterproof the floor. After that, a special glue is applied, and only then it is necessary to lay the tiles. Here, too, do not forget about leveling the surface. As soon as the work on finishing the floor is completed, it is necessary to start laying the first row of the wall. Below you can watch a video tutorial - "laying tiles in the bathroom", which describes all the nuances.

Grouting

Grouting is a staple in bathroom refinishing – and every bathroom tile lesson will prove it. To carry out such work, it is necessary to use a special solution, which is called grout. Such a solution is sold in every hardware store and has a different color scheme.

Matching the grout to the color of the tile itself will not be any particular problem. Even if your tile has a rather complex color scheme, you can use white grout.

The grout should be applied with a special rubber trowel over all joints. The time for the grout to dry completely is about 3-4 hours. After it dries, it is necessary to remove all excess with a regular cloth. After completing this work, the process of finishing the tiles can be considered completed.

Great care must be taken when using large sized slabs for wall cladding in the bathroom, as materials of this size can be very brittle. But it is undesirable to use them, because they break very often. Also, such plates are not recommended for use in small rooms. From a computational point of view, this is uneconomical.

Combined bathroom tiling

This type of tile finish has recently been often used by various craftsmen and designers. You can look at many photos to understand what this method is. Combined finishes allow you to decorate the bathroom in a variety of ways.

There are such ways of combining tiles:

• Ceramic tiles are included as the main finish, and decoration of the wall covering is included as an addition;
• The tile finish is in the form of a mosaic. This type of coating is usually made of stone, glass and ceramics.

Consider what are the advantages of combined tiled finishes:

• Many different finishes;
• It is possible to create your own, unique design;
• Installation can be done by hand;
• It is possible to create your own visual effect in the room.

There are a variety of types for combined finishes, but in order to choose the option for yourself, you need to try a little.

For example, the use of finishes in one color scheme with large texture combinations can visually increase the area of ​​\u200b\u200bthe bathroom.

In addition to this option, there are several more:

• Using a tile that looks like a screen. This decoration option will give the bathroom more volume;
• Creating a mosaic or ceramic apron over the washbasin. This option is quite common, and will also give a visual highlight to the place where it is located. To create a highlight for the room, you need to use this option to make a frame around the bathroom mirror;
• Use of inserts on the floor covering. To implement this option, it is necessary to use tiles of various textures and designs. In addition, you can perform a checkerboard pattern with a pattern in the middle of the room. This style looks quite original and beautiful;
• The use of Christmas trees. This design of the bathroom will always remind you of the New Year holidays.

If something is not clear to you about laying tiles, you can watch a video where real professionals can clearly show the correctness of the finish.

If you still decide to carry out this type of work in your bathroom, then you should remember the price of building materials. Although their price is high, but the quality will please you for many years to come. And our instructions and videos will help to realize the plan.