Instructions for installing an asymmetrical bathtub bass allegro. Acrylic bathtubs bas - advantages and overview of models Installation of an acrylic bathtub bas

Purity of soul and peace of mind - this is what any self-respecting person needs! For most of us, these very concepts are the goal to which we ourselves strive, without noticing it or realizing it. As it says folk wisdom- in a healthy body - healthy mind! The same can be said about purity: a clean body means a clean soul. Now, in order to achieve purity of the soul, first of all we need to achieve the purity of our body. And this is easy to achieve: just come after work and plunge into hot bath. At the moment, nothing is simpler, but it’s such a pleasure! In addition, every person sometimes needs the very least - to be with himself, relax and think about the past day and future plans, and so that no one bothers him. And where do you think all this can be achieved? Exactly! In bathroom! To achieve the above, the equipment and decoration of this very room plays a significant role.

In modern conditions, so-called acrylic bathtubs have received significant variety. From this material you can get baths of any color and shape, it all depends solely on your imagination.

You can choose a bathtub for every taste, completely matching your desires. It is these requirements that the bas acrylic bathtubs that we offer you meet.

bas baths have their advantages, namely:

• the material takes a long time to cool;
• bathtubs of this type do not lose color or deteriorate and will serve for a long time;
• high guaranteed service life (from two to ten years);
• in case of damage, bathtubs can be easily restored using grout intended for this purpose;
• they are easy to install, operate and maintain;
• confirmed by the appropriate certificate.

To achieve all the listed requirements, we advise you to use bathtubs and curtains for them from the BAS brand (Bath Acryl Systems). Acrylic and massage bathtubs with curtains will please any whimsical client.

bas acrylic bathtubs are manufactured in several stages:

1. 1) the acrylic sheet is heated to a temperature of 130-160°C;
2. 2) a trough of the desired shape is formed;
3. 3) this trough is cooled;
4. 4) the resulting form is fixed in the right place;
5. 5) the outer edge of the bath is coated with epoxy resin and fiberglass in several layers (this gives rigidity and strength).

But, if the shape of the bathtub is too complex, then its strength will be much lower, because The plasticity of acrylic has certain limits. Therefore, you need to make a choice between beauty and reliability. If you use high-quality sanitary acrylic when making a bathtub, then your bathtub will not be subject to corrosion, chemical and other types of influences. IN acrylic bathtub bas you can insert hydromassage jets. A variety of settings according to your order can provide a variety of massage modes (from pulsating to oriental). If you have a regular acrylic bathtub, then after a while you can build a hydromassage system into it, for which you just need to buy this system and call the appropriate specialist.

Let's consider the issue of maintaining our baths. Unlike a cast iron or steel bathtub, caring for an acrylic one is even easier. The only drawback is that the bathtub is not suitable for soaking laundry. Plumbing acrylic is not a porous material, so it is not susceptible to contamination. To maintain, simply wipe the bathtub with a soft sponge and a cleaning agent (you can use liquid soap and etc. detergents). But the use of abrasive substances and solvents is strictly prohibited. Hot tubs should be disinfected annually (but not more often) and cleaned of water deposits. This is done using a disinfectant or vinegar (1.5 l) added to a bathtub filled with water. Then we turn it on for 10 minutes, drain it, fill the bath, and turn it on again for 1-2 minutes. Then we rinse the bathtub from the shower.

No matter how durable the material is, unfortunately, it can also crack and be scratched. But scratches and cracks are easily eliminated. To do this, you need to sand the damaged area with sandpaper. The procedure should be carried out by constantly pouring water. When purchasing bathtubs you can purchase special means, adapted for removing cracks, as well as all kinds of polishing. At proper care The service life of your bathtub will reach up to 20 years.

The most common bathtubs, rectangular in shape, are suitable for any bathroom. The choice of sizes is quite wide, from very small to huge. To save space in your bathroom, you can use corner baths that can be installed in small spaces. An example is the Alegra bathtub, which has an asymmetrical shape. In addition, there are baths that have common standard sizes, such as Imperial or Iris. But, if the size of your room allows you to install larger baths, then you can install a Laguna bath. The offered choice of shapes and sizes will allow you to enjoy the bathing procedure to the fullest!

A shower stall can serve as a replacement for a hydromassage bathtub or as an addition to it. It is with its help that you can save space. The shower cabin is well suited for those people who do not particularly prefer a bath. In addition to its main function, the shower cabin has a number of additional features, such as a telephone, radio, etc. In addition, you can install Turkish bath and/or hydromassage installation.

First of all, of course, a few words should be said about the company that produces acrylic bathtubs BAS. This company continues to surprise its consumers and partners, proving that bathtubs produced in Russia are no worse than their foreign counterparts.

The main products of this company are hydro and air massage acrylic bathtubs. Among the obvious positive aspects Acrylic bathtubs produced by BAS can be distinguished as follows:

• acrylic bathtubs from bas are manufactured using multi-layer polymer plastic from senoplast - a combination of acrylic and ABS plastic gives strength and reliability to the bath;
• the same plastic from senoplast also has an antibacterial effect, which protects the bathtub from the proliferation of various bacteria
• Bathtubs from bas are manufactured using high-quality Italian equipment, so the products can compete with European products
• acrylic bathtubs are reinforced with a steel frame, which is well protected from water
• the products are manufactured in Russia and therefore their features take into account the design of Russian bathrooms

Buyers about BAS bathtubs

I wonder what the buyers themselves say about acrylic bathtubs; reviews are quite easy to find on the Internet. It turns out that the majority of customers were very satisfied, saying that the acrylic bathtub from bas works great. Buyers happily share their impressions that the bathtub of this company:

• does not scratch, despite the fact that the shower periodically falls into it
• The side is very thick and you can sit on it
• The bath retains heat perfectly, and therefore you can bathe in it for a long time, even if hot water in limited quantities
• The bathtub is equipped with excellent comfortable armrests
• takes up little space, all models are well thought out
• the only detail that earned several negative reviews, it turned out to be a hydro and air massage system - they say that it does not last very long, and repairs are quite expensive

Also interesting point It turned out that many buyers installed and assembled both an acrylic bathtub and a bathroom curtain on their own. Of course, not everyone can do this, but we can still assume that this indicates the quality of the product, since even an unprofessional assembler will do everything efficiently. However, installation acrylic bathtub bas can be produced by professionals - it all depends on the client’s capabilities. The instructions that come with the bathtub are quite clear and simple, so assembling the bas acrylic bathtub is not difficult.

Three great examples of BAS products: Atlanta, Florida and Laguna

One great example is the acrylic bathtub bas atlanta, which has certain advantages. So, the dimensions of this bathtub model are quite modest, it is suitable even for a small bathroom - 170 by 70 cm. However, the capacity is very good - 205 liters. Since BAS baths are mainly hydromassage, Atlanta is no exception - it is equipped with six nozzles - three on each side.

The required kit includes a standard set:

• metal frame that guarantees the strength of the bath
• legs under the bathtub, which allow you to adjust the height of the bathtub and ensure its stability
• a front panel that will cover the space under the bathroom and give the interior a complete look
• necessary device for draining and overflowing

In terms of design and space optimization, this is a very simple, medium-sized rectangular bathtub that is comfortable enough without taking up too much space or being distracting. excessive attention, so it will easily fit into almost any modern design.

Another example of an excellent bathtub is an acrylic bathtub - this is a corner asymmetrical bathtub. It is quite compact in itself - length 160 cm and width 88 cm, and at the same time it also has a beveled corner, so it will become ideal option For small room. Although her style is quite simple and elegant, if desired, you can highlight her - for example, create a visually separate space for her, using decorative elements, finishing with tiles of a different color or shade, additional shelves, etc. In addition to its ergonomic design, this bathtub also has an interesting shelf for hygiene items, or even to sit on.

The equipment here is standard - the same as in Atlanta. The capacity is also 205 liters. But there are more hydromassage jets - there are eight of them.

The last one to consider, of course, is a model such as an acrylic bathtub bas lagoon, which is somewhat similar to the Florida model. However, Laguna is larger in size - 170 by 110 cm. The capacity is also much larger - 295 liters. And the number of hydromassage nozzles is the same - eight pieces. The equipment is standard.

This a bath will do for a medium-sized room, due to the fact that although it is asymmetrical, it is still quite large and is unlikely to fit well in a small room. This model is also very conveniently equipped with a shelf for bathroom accessories and has an ergonomic design. At the same time, it will most likely be one of the main elements in the design of the room, this is facilitated by its rather large size. Therefore, you can highlight it with directional colored lighting or other decorative options. Also, great idea will hang large mirror next to the bathroom, so that it expands the space, and the bath no longer seems something bulky.

In addition to the standard equipment, BAS offers its customers quite big choice additional options. These additional features can be divided into several groups:

1. Aero and hydromassage lotions: various types of massage - back, shiatsu, foot; aeromassage from 6 to 12 nozzles, hydro-aero-pipe massage.
2. Faucets: cascade mixer or even the whole set: spout, mixer, shower holder.
3. Backlight: various types lighting and chromotherapy.
4. Pleasant little things: headrest, armrests, cleaning products for the massage system or the bath itself, a pillow for the on and off buttons.

BAS provides its customers with truly ample opportunities according to the choice of model and set of bathtub configurations, plus you can choose a design curtain.

Over the past few years, acrylic bathtubs have gained immense popularity among consumers, as their technical characteristics and appearance are much superior to those of their counterparts made from other materials. Their advantages include Not heavy weight, ability to retain heat, ease of care, reasonable cost and much more. But choosing acrylic bathtubs is still a difficult task for most buyers, since such products are presented in a huge assortment on the market.

The ratings of foreign and domestic manufacturers, as well as instructions for choosing quality products, will help you understand the features and parameters of bathtubs.

To choose the right acrylic plumbing fixtures, you need to know a few important criteria, affecting the quality and durability of the product.

Material of manufacture

Acrylic is a polymer composition that consists of several compounds (methacrylics, polyesters). For the manufacture of plumbing fixtures, two types are used: ABS and PMMA. The first type is a two-component polymer, which is essentially an elastic plastic, and the second is close in its characteristics to organic glass.

The base of products is usually made from ABS, which is covered with a layer of PMMA on top. The result is a bathtub with a fairly thin layer of acrylic that can withstand about 5 years of use. In addition, ABS has high porosity and the ability to absorb water, which is why bathtubs deteriorate quite quickly.

PMMA is a more durable material with good technical characteristics. It is durable and aesthetically pleasing, but products made from 100% PMMA are more expensive than others.

You can determine which type of material was used in the manufacture of the bathtub by its appearance.

Attention: a burst bath bowl made of low-quality acrylic can lead to serious consequences in the form of a flood for neighbors, so special attention should be paid to assessing the quality of the material.

Reinforcement

Acrylic itself is not strong enough, so a reinforcing layer is applied to products that will be subject to mechanical stress. For this purpose they are used epoxy resins, fiberglass and polyurethane foam, which are used to cover bathtubs with layers of outside(the more layers were applied to the surface, the greater the load the structure can withstand).

Reinforcing plumbing fixtures with polyurethane resins with the addition of fiberglass is cheaper, but a violation of the technology can lead to the bathtub producing a sharp sound. chemical smell. Bathtubs reinforced with polyurethane foam are more expensive, but they are absolutely environmentally friendly and safe for humans.

Important: some manufacturers apply the reinforcing compound exclusively to the ends of the product - where the buyer can see them, while neglecting the treatment of the rest of the surface.

Wall and coating thickness

The thickness of the walls of the bathtub is another characteristic on which the reliability and durability of the product depends. Good plumbing fixtures have wall thicknesses ranging from 2 to 6.5 mm with a coating of at least 0.5-0.6 cm. To save money, you can purchase a product with thinner walls, but do not forget that their service life may be significantly reduced.

When you press on the walls and bottom of the bowl, they should not spring or bend. Most sellers claim that the too thin layer of material is compensated by the reliability of the frame, but the durability and wear resistance of such products is highly questionable.

Dimensions and shape

The dimensions and shape of the products do not affect the quality, but the ease of use of the plumbing fixtures depends on these criteria. From an ergonomic point of view, the main parameters of the bath should look like this.

As for the shape, acrylic bathtubs can be classic, rectangular, corner, oval, etc. It is worth noting that when purchasing non-standard products, you should pay special attention to quality, since the risk of deformation and mechanical damage in in this case rises.

Video - How to choose an acrylic bathtub

Review of acrylic bathtub manufacturers

On modern market acrylic bathtubs are presented in a wide range to suit every taste and budget, but it is better to give preference to manufacturers who have already gained a good reputation among consumers.

Foreign companies

If speak about foreign manufacturers plumbing, the most popular are companies from the Czech Republic, Poland, Spain and Italy. They match European standards quality, therefore they are durable and reliable, but are more expensive than domestic analogues.

Ravak

The products of the Czech company Ravak are considered the most popular in Europe. Bathtubs are made from high quality material using modern equipment and technology. The products have a thick layer of acrylic, are reinforced with fiberglass and coated with polyurethane, which significantly increases their reliability and durability. The company's product range includes bathtubs different sizes and shapes, and some models are equipped with additional functions: hydromassage, lighting, etc.

The disadvantages of Ravak plumbing fixtures include their rather heavy weight (about 20% heavier than products from other manufacturers), as well as the difficulty in selecting components and fasteners.

acrylic bathtubs rawak

Vagnerplast

Another brand from the Czech Republic, which was the first in Europe to begin producing acrylic sanitary ware. Today, many companies rely on Vagnerplast products, as they meet all quality standards. The products have an ergonomic shape, special supports for the legs and head and adjustable legs. The company produces both classic bathtubs and exclusive models equipped with a massage system and other options.

Vagnerplast Cavallo 190×90

acrylic bathtubs vagnerplast

Roca

Roca bathtubs are made in Spain and are among the top three in quality and durability. Products are made by injection molding using the extrusion method from high-quality acrylic. The thickness of their walls is 4-5 mm, which is slightly less than that of other European analogues, but thanks to high-quality reinforcement and a rigid frame, they are practically not subject to wear and chips. Buyers claim that immediately after installation, some models creak a little, but after a while the sound disappears.

acrylic bathtubs roca

Cersanit

Cersanit baths are one of the best in terms of price and quality ratio. They are made in Poland from acrylic sheets 4 mm thick. The products have good technical and decorative characteristics(double reinforced bottom, rigid frame, smooth surface), and the company’s assortment is constantly expanding, so any buyer can easily choose a bathtub to suit his taste. The disadvantages of Cersanit products include the fact that thinner antibacterial acrylic is used for their manufacture, so the installation of a hydromassage system is excluded in this case.

Acrylic corner bathtub CERSANIT VENUS 140×140

Kolo

The Polish concern Kolo is another leader in the production of acrylic bathtubs in Europe. For the manufacture of sanitary ware, English acrylic sheets with a thickness of 3-5 mm are used, which are highly reliable and durable. The technology of forming products involves adding a special pigment to the material, thanks to which the baths can be polished and cleaned without fear of damage or scratches. IN the lineup Kolo products include classic rectangular, corner and asymmetrical models. As with Cersanit products, Kolo bathtubs are made of thin acrylic, so they cannot be installed with hydromassage systems.

Acrylic bathtub Kolo Relax 150×150cm

Riho

Riho is a Dutch company that offers a wide range of products, including corner, round and even hexagonal bathtubs. The thickness of the acrylic sheets used to produce bathtubs is 6-8 mm, due to which the brand’s sanitary ware is durable and wear-resistant. Special attention When manufacturing products, we pay attention to their environmental friendliness and safety, so they have an antibacterial coating and a non-slip bottom. The most significant drawback of Riho bathtubs is high price, especially when it comes to products of non-standard shape.

NEO 150×150 semicircular corner acrylic bathtub (RIHO)

Video - Choosing an acrylic bathtub from foreign brands

Domestic producers

The cost of plumbing fixtures from domestic manufacturers is significantly lower than the price of their European counterparts, but this does not affect their quality at all. Modern products Russian companies are made from high quality acrylic using innovative technologies and equipment, making them a good alternative to more expensive bathtubs.

Aquanet

Acrylic Aquanet bath Fregate 120×120

The Aquanet company is a leading manufacturer of sanitary ware, which manufactures products according to recognized standards using equipment from Italy. Among domestic companies The products of this brand are considered the most expensive, as they have quality certificates and provide a guarantee for all models. Aquanet bathtubs are made from acrylic sheets 5 mm thick, but thanks to a special reinforcement technology, the products are wear-resistant and reliable. The brand's disadvantages include the use of a composite during the production process, which is why the bathtub can emit a strong chemical odor during the first time after installation.

Acrylic bathtub Aquanet Graciosa 150×90

Bas

For the production of sanitary ware, the Bas brand also uses European equipment and materials, and in the process the material is processed infrared rays, which allows you to give it any shape. Reinforcement is made using both glass fiber with the addition of polymers and safer and more environmentally friendly polyurethane. Bas has a large number of models in its assortment different designs, including baths equipped with air and hydromassage systems. The manufacturer provides a ten-year warranty for all products.

Acrylic corner bathtub Bas Laguna 170×110 (right)

Aquatek

Aquatek bathtubs are made from five-millimeter sheets of acrylic without any impurities and are reinforced with fiberglass and polyester resin. In addition, they are durable aluminum frame, which increases the reliability and strength of products. The advantages of the brand’s products also include an attractive appearance and a pleasant-to-touch surface, which makes hygiene procedures as comfortable as possible. The surface of the bathtubs is easy to clean and is not subject to mechanical damage during operation. The weight of the products ranges from 15 to 25 kg, which greatly facilitates the transportation and installation of plumbing fixtures.

Radomir

Radomir is one of the first companies to begin producing acrylic bathtubs in Russia. The company's product range includes bathtubs different forms and sizes, including products intended for people with disabilities. In the production of sanitary ware, the main attention is paid to its safety and environmental friendliness, which is why Radomir products can be found in hospitals and sanatoriums. The baths have a special coating that prevents the growth of bacteria, as well as the formation of fungus and mold on the surface of the material. Additionally, brand products can be equipped with hydromassage, lighting, touch screen and other options.

Acrylic bathtub "Estelona" with panel

Hot tub "Sorrento"

1Marka

The 1Marka company has been operating in the domestic market for 15 years, the main production line is located in Kazan. The manufacturer specializes not only in acrylic bathtubs, but also in other plumbing fixtures. The peculiarity of the enterprise is the presence of its own design bureau, which allows us to constantly improve products and create new models. 1Marka products are aimed exclusively at domestic consumers, so the company’s assortment includes many small-sized products that are well suited for small bathrooms. If desired, any consumer can order plumbing fixtures according to their own original sketches.

Triton

Bathtubs of the domestic brand Triton are made from Dutch and Austrian materials using advanced technologies and are reinforced with high-strength fiberglass. To give the products additional strength, specially shaped inserts are used, and the top of the plumbing fixtures is coated with a compound that protects it from bacteria and mechanical damage during operation. Triton's product range includes rectangular and corner baths, models with hydromassage, lighting and lamps for chromotherapy.

BellRado

Bathtubs under the BellRado brand are manufactured in Chelyabinsk region and have already gained popularity not only in Russia, but also in neighboring countries. The company's plumbing belongs to the economy class, but the quality is not inferior to well-known European products. It is developed taking into account consumer requirements and the characteristics of the domestic market. The company offers about 30 different models bathtubs, including rectangular and asymmetrical products, as well as bathtubs equipped with a hydromassage system.

BAS Nicole

When purchasing an acrylic bathtub, you should pay attention not only to the operational and decorative characteristics of the product, but also to the accompanying documents, which contain information about the manufacturer and product. In this case, the consumer will receive truly high-quality plumbing fixtures that will faithfully serve for many years.

Acrylic bathtubs bas are very popular among today's consumers. They have become a good replacement for all other bathtub models. The Russian manufacturing company bas produces a large assortment bathtubs of different shapes from corner to asymmetrical, various color range with a long service life. Therefore, consumers choose these products.

All company products are manufactured using modern Italian and American equipment. The products include a variety of shower enclosures, bath curtains, and there is also a huge selection of acrylic bathtubs. Despite the fact that bass bathtubs have up to 40 types of different models and some of them are similar to each other, each of them has certain functions and features.

Bathtub sizes

By size, baths are divided into large, medium and small:

Advantages of a bass bath:

1. An acrylic bathtub bass will help save space in the bathroom, while maintaining its internal space, unlike a simple model.
2. The acrylic bathtub is sold with or without hydromassage.
3. You can additionally purchase a hydromassage and install it yourself.

Corner baths

These models have a large internal volume, which saves a lot of space in the room. One side is slightly wider, thanks to which the volume of the tank inside is larger than that of the straight model. They have a beautiful appearance, will suit any interior, installing it at home, all friends and relatives will be delighted. Left-handed and right-handed models are sold, in inner corner has a special stand for bath cosmetics, sometimes the stand is used as a seat.

Symmetrical baths

Symmetrical corner models made with the same length and width. They are ideal for installation in houses with bathrooms large sizes. Often there is not much space in apartments, so when installing a bathtub, they try to do it in a way that saves space.

• Bathtub "Firewood"

In the Drova bath, two people can take a bath; its volume is 280 liters, depth 46 cm. There are two headrests, two armrests and a seat on both sides. There are also shelves inside for accessories and a controlled water overflow device. The Firewood acrylic bathtub will look neat and beautiful in the interior of the bathroom. Its two sides are symmetrical, and the third is rounded; it is one of the best corner products. Separately, you can equip the bath with a variety of lights, handles, as well as hydromassage from 8 to 12 nozzles. An additional “Niagara” mixer for foot massage and a control panel with radio will help you feel complete comfort.

• Bath "Iris"

This model has a large water capacity, and by installing an additional hydromassage, you can take a bath together while enjoying a back and leg massage. The Iris acrylic bathtub will help save space in a not too large room, and thanks to its angular shape it looks elegant and beautiful. The wide edges of the bathtub can be decorated on both sides with various accessories. Additionally, lighting and handles are installed. Made from environmentally friendly pure material with a durable frame, affordable.

Asymmetrical bathtubs BAS

Thanks to the emerging asymmetrical models, you can free up additional space in the room. It appears due to the fact that such products lack one corner, instead of which you can install a laundry basket, a sink with washing machine and much more. Unlike straight bathtubs, this one has a special stand for bath accessories.

• Bath "Florida"

This model is suitable for installation in a room with a non-standard layout. It will give any interior a feeling royal luxury. The volume of the bath is 205 liters. Its outer side is reinforced, therefore quite strong and reliable, and the inner side is coated with an antibacterial composition. The asymmetrical bathtub model consists of three straight walls, and the fourth is rounded; it can be installed on the right or left side. The inner bed has a seat, headrest and armrests. On one side of the bath there is a wide edge that can be used as a stand for bath accessories. Additionally, hydromassage, curtains, lights and handles are installed.

• Bathtub "Fantasy"

The Fantasy bath is intended for people with heavy physical and constant mental stress. The egg-shaped tank will help you relax by immersing yourself completely in water after a heavy workout. working day. Product made for corner mounting, equipped with internal projections for the seat, headrest and armrest. The installation height of the bathtub is adjusted using the included legs. Additionally, hydromassage, lighting and handles are installed.

Straight and rectangular models

This type of bathtub is standard and can be found in any apartment. Unlike cast iron and steel products, straight and rectangular acrylic bathtubs BAS can be various sizes. Each model has its own shape and fits all bathroom sizes. Some of the products have bloated, voluminous or round shape, others are more like marble with sharp corners.

• Bath "Verona"

A small acrylic bathtub is perfect for small bathrooms. Has a small internal volume of the tank, made in classic style, installed on any side of the bathroom. Inside there are armrests and a headrest. When collecting water into the tank, excess noise is dampened, eliminating vibrations thanks to a specially created additional design. Additionally, you can install hydromassage and lighting, a control panel with radio. These models are budget option

Whirlpool baths

Acrylic bathtubs BAS can be purchased with or without hydro-, aero-massage. They are divided into different types, differ in price. Hydromassage is created using several jets of water, and aeromassage is created using air flow. In order to water procedures were convenient and comfortable; you can independently regulate the strength, as well as the duration of the flow of water and air.

1. A standard hydromassage has six nozzles, which are installed 3 on one side of the side and 3 on the other. You can adjust the power yourself.
2. The additional hydromassage has eight nozzles located 4 on the left side of the bathtub side and 4 on the right.
3. The foot hydromassage is installed into the side of the bathtub on the foot side.
4. The Shiatsu hydromassage consists of 6 jets. Thin jets of water up to 8 mm in diameter produce acupressure for the back. The nozzles are installed at the bottom of the tank in the thoracic area. You can independently change the direction of the jet from the nozzle in any direction. A similar hydromassage with a 4.5 mm water jet has 12 nozzles.

Hydromassage will help relieve daytime fatigue, stress, help get rid of cellulite, excess weight. For a positive result, it is recommended to alternate the water supply and temperature modes.

It is important to know! Until the water in the tank becomes more than 5 cm above the nozzles, the hydromassage system cannot be turned on. The hydromassage should be cleaned every six months, so the water in the bath will not be hard.

Bathroom care rules

1. Using soft wipes and detergents, you should rinse the inside of the bath after each use.
2. Household chemicals for cleaning smooth surfaces will help remove stains that have formed on the surface.
3. Wine vinegar will help get rid of the formed salts.
4. Using fine sandpaper you can remove scratches from the surface of the bathtub.
5. Polishing agents will restore the original shine of the surface.

Can not use! Iron brushes, solvents, all this will ruin the bath.

All photos from the article

Acrylic bathtub Riola

The famous Bass company gained wide popularity thanks to the use of two modern technologies reinforcement of bathtub surfaces. The first option is based on reinforcing the Bass bath using polyester resin with special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly, high-density two-component polyurethane foam.

Modern baths

Currently, the company's full model range is represented by:

• Bass acrylic bathtubs;
• curtains for them;
• showers;
• special shower enclosures.

30 modern models Bas bathtubs have classic rectangular, asymmetrical and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Any Bass bathtub is molded using special vacuum forming machines produced by the famous Italian company SELF. When operating such equipment, infrared heating of certain areas is used. This method allows you to bend the base sheet into any desired shape.

Bath Fantasy

Popular Bass models

At the moment, the Bass acrylic bathtub is the best option in the price-durability ratio for many citizens of our country. The most famous models All corner baths are considered to have an elaborate curved shape, allowing you to save space and improve the appearance of the room.

How to choose an acrylic bathtub? Let’s take a closer look at three unique models that will satisfy any requirements of the most demanding users:

1. Bass bathtub Laguna - the maximum volume of water up to the protective drain hole at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. Electrical characteristics of this bath V - 220/240. Electrical wiring for power electronic elements performed using an RCD. IN standard equipment includes:

• metal carcass;
• front panel;
• convenient removable legs for installing a bathtub and a drainage device.

Additionally, this model is equipped with: a cascade, safety handles, special nozzles for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Corner bathtub model Bass

1. Bath Bass Alegra – this model has a smaller volume. A total of 220 liters. But it fits perfectly into small bathrooms in Khrushchev-era buildings. The maximum depth in the center is 45 cm, and the height of the screen is 56 cm. The classic equipment is the same as the previous model, and there are the same additions to it: headrest, handles, nozzles, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who have no difficulty in climbing over a fairly high side. Low price goes well with high functionality. This is the brainchild of Bas - a new generation acrylic bathtub with a comfortable corner seat made of durable materials.
2. Bass Nicole acrylic bathtub is a fairly large bathtub. Apart from the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It can be easily installed in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The box has rectangular shape, slightly elongated on one side. If necessary, this bath can be equipped with a vertical stand for hydromassage and a special original curtain for this model.

Bathtub with two vertical walls on each side

Please note: power supply to all models is carried out through an RCD, so it is necessary to ground this device. Otherwise, using such a bath will be unsafe for humans.

Advantages of acrylic bathtubs

Recently, Bass baths have become increasingly popular, but what are the main advantages of such devices?

Users and installers of plumbing accessories note: whole line advantages of such baths.

1. Unlike steel and cast iron analogues, bathtubs acrylic bass have low weight and very high strength, which was inaccessible to non-metallic products for a long time.
2. Even when not filled with boiling water, they have a temperature that is pleasant for humans and do not allow the collected water to cool for a long time. This property is achieved through the use of acrylic, which has very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
3. All such bathtub models have ergonomic shapes, specially created to fit the curves of the human body.
4. The acrylic surface is highly resistant to various mechanical damage: chips, deformations and scratches.
5. Acrylic is able to retain its original shine for many years and does not turn yellow, as happens with enamel analogues. In addition, they practically do not slip, which makes their use safer for children and the elderly.
6. The surface of such bathtubs is covered with a special antibacterial layer that prevents the development various diseases and fungal deposits.
7. The water draws quietly enough, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Rectangular bathtub model

Advice: if you want to install a bathtub model with a hydromassage function, then first think about where it is best to place additional equipment.

Conclusion

If you decide to use Bas company products, acrylic bathtubs will be purchased at the most reasonable price. And the number of different additional functions will turn ordinary hygienic bathing into a real spa procedure.

The high environmental friendliness and ergonomics of all models allows you to install and use these devices for convenient bathing of babies and small children. They are easy to fit into any interior, thanks to the variety of shapes and convenient way installation The only thing you should not forget about is the mandatory grounding of such baths. Don't be lazy and risk your health by relying on luck.

Gallery