The toilet in my apartment is clogged, what should I do? Water does not drain from the toilet and bathtub: causes of the problem and options for eliminating it. We eliminate the blockage by removing the corrugations

A clogged toilet is a common problem faced by many people living in apartments. This phenomenon is quite dangerous, since in the absence of timely measures, sewage can begin to come out of the toilet, flooding the apartment and flooding the residents lower floors. That is why you should eliminate this problem as early as possible. So what to do if the toilet is clogged?

Causes of blockages in the toilet and methods for eliminating them

The toilet may become clogged for the following reasons:

1. Failure to comply with the rules for using plumbing equipment. For example, it is not recommended to wash off a lot toilet paper. Blockages can form when rags get into the toilet, small items like toys, etc. - this is often common if children live in the apartment.
2. Mistakes when installing plumbing fixtures yourself at home.

   Water begins to be poorly flushed if the toilet bowl is incorrectly positioned in relation to the riser and errors in the installation of pipes. If valves have not been installed or fan pipes, when draining water equalizes the pressure in the pipe, blockages become an inevitable result.

3. Design features. The cause of the blockage may be the following: ridiculous reason, as a technical ill-conceived design.

Before choosing a product that will help clean the toilet, you need to determine the degree of blockage. It’s quite simple to do this at home: you need to pour about a liter of water inside, and after 30 minutes check how much has gone.

No need to drain the water from the tank! There is usually at least 5 liters and, if the blockage is serious, water may begin to overflow over the edge of the toilet, flooding the floor.

You also need to check how the water drains in the kitchen and bathroom. If the drainage occurs normally there, then the problem is local and only the pipe coming out of the toilet is clogged. You can remove such a blockage on your own. If there are widespread drainage problems, you will need to call in specialists for help.

How to break through a toilet and clear the blockage yourself at home

Four most simple methods break through the toilet - mechanical (using a cable), hydraulic, chemical and pneumatic:

But the first thing to do is try to check the toilet for a stuck object in the pipe. To do this, put on a rubber glove and put your hand deeper into the drainer. If the object is not stuck very deep, it will be enough to remove it. If you can’t reach the object or the cause of the blockage lies elsewhere, you will have to use one of the following methods.

How to clean using a cable if an object is stuck

They resort to the cable if the toilet is clogged to such an extent that the water no longer leaves on its own. The cable must be flexible and have a handle on one side. You can purchase it at any hardware or plumbing store, or, at worst, ask your neighbors.

It is advisable to use two people to clean a pipe using a cable - one person pushes the cable, the other turns the handle. Rotation is required for the cable to pass through all bends in the pipe. When the cable has been advanced to its full length, it is necessary to move it back and forth several times to soften accumulated deposits or push through a deeply stuck object.

Before removing the cable from the pipe, it is recommended to place a wide rag on the floor, take the second one in your hands and wipe the cable as it is removed from the toilet. Cleaning a toilet with a cable is a very dirty procedure and care should be taken to clean it prematurely.

Hydraulic method if the toilet is clogged

This method is extremely effective if the problem of blockage is accumulated fat deposits. You will need a hose to carry out this cleaning procedure. One end of the hose is connected to the bathtub or sink faucet, the other is inserted into the toilet drain hole.

After this, you need to open the hot water at full power, the flow of which under pressure will break through the clogged pipes. This method is not as effective as the previous one and usually requires several approaches. Be careful when hydraulically cleaning a clogged toilet. With too much pressure hot water you can cause water to leak out of the toilet of your neighbors below.

Pneumatic if clogged

This method of clearing a clogged drain involves creating strong air pressure that can force the clogged object into the drain.

This procedure is carried out using a simple plunger. Using vigorous movements, you need to pump air in the drain hole with this tool until the water begins to drain normally.

Chemical

A very effective way to remove fat deposits is to use chemicals. The simplest of them is vinegar and. Use it like this:

1. First, accumulated water is removed from the toilet.
2. Half a pack of regular soda is poured into the drain hole.
3. 200 g of vinegar is also poured there.
4. Wait about half an hour for this to happen chemical reaction.
5. Pour 3 liters of boiling water into the toilet.

This method cannot be used if the connecting corrugation is made of plastic, since treating it with boiling water can cause it to burst. In such a situation, it is better to just use hot water or look at other methods that tell you how to clean the toilet.

Instead of soda and vinegar, it is recommended to use special products to clear clogs. Now in stores you can find a lot of chemicals intended for these purposes. They must be used strictly according to the instructions - each product has its own method of use.

It is necessary to work with these products only with rubber gloves, and the air in the room should be well ventilated. None of the chemicals work instantly, so you need to be patient.

How to prevent clogs

Removing a blockage is an unpleasant procedure. It is much easier to take certain measures to ensure that the toilet does not become clogged. To do this, you need to adhere to the following recommendations:

1. Keep it out of the toilet foreign objects. It is not advisable to even throw too much toilet paper and hygiene products there.
2. If the water does not drain very quickly, you need to check whether the drain is working correctly.
3. Regularly, at least once a month, preventive cleansing should be carried out sewer drain. It is best to use special chemicals for these purposes.

There's a blockage in the toilet - that's it a big problem, as it would seem. You can clear the blockage in many ways, as shown in the video:

In most cases, you can deal with it yourself, without resorting to the services of a plumber.

Every city resident has had to deal with a clogged toilet at least once. When the toilet at home is clogged, and sewage pipe can't cope with removing wastewater, then questions arise about how to clear a clogged toilet yourself, what to do for this, and also what means to use.

Signs of a blockage

The main signs indicating that a toilet or sewer pipe is clogged are:

• emergence unpleasant odor from a sewer hole;
• slow removal of water from the toilet when flushing;
• the appearance of waste products in the toilet and dirty water rising from the opening of a sewer pipe.

With such signs, it is important to determine the cause of the blockage in order to know exactly how to unclog the toilet. What to do if the toilet is clogged, and how to remove the clog in the toilet? To get answers to these questions, you can look best photos, allowing you to independently remove dirt from a toilet flush or sewer pipe.

Causes of blockages

Removing a clogged toilet begins with identifying the causes, which can be divided into two types:

• improper use of the toilet;
• Not correct installation toilet.

At home, a clogged toilet can occur due to lime or mud deposits on the drain or sewer pipe. However, the person himself can influence the fact that he has to think about how to remove the blockage in the toilet on his own. Often, leftover food is flushed down the toilet, toilet paper is thrown away, cat litter gets in, a rag slips out along with water after cleaning - all this tries to get into the drain, but gets stuck.

And if the water is pressed cistern toilet and doesn’t think about leaving, you will need to remove the clogged toilet yourself. Here, the owners have to decide whether to remove the blockage themselves or call a plumber who can quickly break through the blockage in the sewer pipe. Look at the photo, which shows how a toilet can become clogged, and how to unclog a toilet yourself.

Mistakes made during sewer installation often lead to a clog in the toilet, what to do in this case? The situation when the toilet is clogged requires a search best options removing blockages in the toilet and sewer riser. From the corresponding videos and photos you can find out that toilet installation errors include:

• insufficient angle of inclination of sewer pipes;
• undesigned fan ventilation in the sewer riser pipe;
• using a cement solution to connect the toilet to the sewer drain pipe instead of a special gasket.

To clean and remove blockages in the toilet, it is important to accurately determine the location of dirt or various objects. And the correct installation of the toilet shown in the photo will allow for a long time don’t think about what to do if the toilet is clogged.

Removing blockages at home

Your toilet is clogged, what should you do? You will have to think seriously about this and find an opportunity quick fix clog in the toilet. How to unclog and remove a clog in a toilet at home with your own hands? First of all, in order to effectively eliminate the problem in the toilet, you need to determine where exactly the blockage occurred. Often the blockage forms in the water seal, but the cause may be in drain pipe and sewer riser.

To check whether the sewer riser is clogged, you need to drain the water in the bathtub or sink. If the water is flushed normally, we can conclude that the toilet is clogged, what to do in this case? To unclog and remove a clog in the toilet, you can:

• clean the toilet drain by pouring hot water into it;
• use mechanical means(plunger and plumbing cable);
• apply chemical method when you can use chemicals that corrode fatty deposits on pipes;
• flush the toilet manually;
• Use the air method to clean the toilet and pipes.

If it was not possible to break through and remove the blockage in the toilet drain pipe, then more radical measures may be required. You may have to completely replace the sewer riser because you were unable to clear and remove the blockage in the toilet with your own hands. It is unlikely that you will be able to do this yourself - you will need the help of a specialist, but you can familiarize yourself with the process by studying videos and photos.

Cleaning with water

What to do if the toilet is clogged, first of all? The simplest, but very in an effective way, at home is flushing the toilet hot water. It is best used to clean and remove minor blockages in the toilet. If you choose this method, to unclog the toilet, you need to pour a bucket of hot water into the drain hole.

You can use water from a drain tank, which is pre-filled with hot water. To break through and remove a blockage in the toilet, you need to perform this procedure several times (look at the photo showing how to clean the toilet yourself). This effective method for use at home helps to liquefy deposits on the walls of sewer pipes. It allows you to clean the toilet and flush liquid mud down the drain.

Using a plunger

A plunger should be used when it is necessary to clean and remove a blockage in the toilet, if the water slowly but still flows into the sewer pipe. You should close the toilet drain hole with a plunger and use it back and forth to quickly clear the blockage in the toilet.

If you don’t have this tool at home, you can make a similar device with your own hands from a plastic bottle. The bottom of the bottle is cut off, and then some kind of handle is attached to it. With this device you need to do the same things as you would with a plunger to remove a clog in the toilet (see photo showing how to remove a clog with a plunger).

If this method does not allow you to remove the blockage, you will need a plumbing cable, which the blockage will definitely not be able to “resist”. With its help, you can eliminate this problem even if the toilet is clogged cat litter. A plumbing cable allows you to remove dirt from the walls of a drain or sewer pipe due to its flexibility and long length. To learn how to properly use a plumbing cable to clean a toilet, look at the photo and video, which allows each person to remove the blockage in the sewer pipe themselves.

Chemical method

When the toilet is clogged, what should you do if mechanical means are unable to clear the blockage? At home, you can use chemicals that eat away the blockage in the toilet, causing the water to quietly go down the drain. You can purchase a solution for toilet blockages to use at home and break through the blockage yourself at any hardware store.

The best chemical toilet flush cleaner is considered to be “Mole”, which can decompose limescale, greasy deposits, hair, that is, everything that got into the drain and sewer pipe. This toilet unblocker can clear clogs caused by cat litter down the toilet drain.

There are also folk remedies that also belong to the category of chemicals - you can use soda and vinegar, which can perfectly clear the blockage in the toilet. To clean and remove blockages in the toilet, use baking soda and vinegar as follows: scoop out excess water from the toilet, pour out half a pack of soda and push it deep into the toilet drain, pour in a glass of vinegar, and after the reaction between soda and vinegar is completed, boiling water is poured into the drain hole (or just hot water from the tap in cases where the connecting corrugation in the toilet is made of plastic).

Sometimes baking soda and vinegar are great chemicals folk remedies, which can quickly clear and remove blockages in the toilet, allowing water to flow freely into the sewer pipe. Check out the photo below to see how to use baking soda and vinegar to clear clogs yourself.

Plumbing cable

For difficult clogs in the toilet (when vinegar does not help), it is better to use a plumbing cable, which is a long piece of twisted steel wire. The plumbing cable at one end has a special tip that allows you to clear the sewer pipe, and its other end is equipped with a handle so that the device can be conveniently used to clear blockages in the toilet.

Clean the toilet using plumbing cable It’s more convenient for two people - one person pushes the cable deep into the sewer pipe with a back-and-forth motion, and the second person helps turn the plumbing cable. Study the photos that show how to properly unclog and unclog a toilet using a plumbing cable. Then you can do it yourself quickly and easily.

The plumbing cable is pushed into the sewer pipe until it hits an obstacle, which most likely turns out to be a blockage - it urgently needs to be cleaned and removed from the sewer pipe. After you have managed to remove the blockage and thoroughly clean the sewer pipe with a plumbing cable, you need to use hot water to remove any remaining dirt that has come away from the pipe.

Further, baking soda and vinegar or other stronger chemicals can be used as preventative agents. The best photos will tell you how to properly use products to clean and remove any blockage in the toilet - they clearly show how to use a plumbing cable or strong chemicals. After studying the photo instructions, you can quickly eliminate the causes of the blockage and clean the sewer pipe with your own hands.

Air cleaning

You can clear and remove blockages in the toilet by supplying air masses into the wastewater drain hole. For this method, which allows you to quickly remove a blockage from the toilet, a hose with a special tip or special installations are used that supply air under pressure and allow you to quickly break through the blockage.

Installations designed to clean and remove toilet blockages can be equipped with small video cameras that allow clearing blockages in the sewer pipe while constantly monitoring the entire process. How to remove a clogged toilet in this way, you will find photos that will allow you to easily deal with the problem yourself. And while the best chemicals can cost a lot, this method allows you to eliminate the cause of the blockage in the toilet without harming your wallet.

Prevention

To avoid the need to clean and remove blockages in the toilet and sewer pipe using a plumbing cable or chemical substances, it is important to prevent such problems. It is better to make sure that the toilet does not “suffer” from blockages, and for this you need to adhere to the following rules:

• You cannot throw garbage, paper, various items, food waste;
• if rags, toys or other things get into the drain, you must remove them immediately, otherwise you will have to remove the plug later (objects can clog the drain and sewer pipe);
• you need to monitor the serviceability of the toilet cistern and flush waste products in a timely manner;
• periodically carry out preventive cleaning using chemicals (Mole, vinegar) and hot water.

You can learn more about preventive measures that allow you to eliminate fatty deposits in sewer pipes from the video and step by step photos, which give a person the opportunity to break through the blockage himself and eliminate the unpleasant problem.

You can constantly fix problems that have arisen with your plumbing, or you can simply use it without hassle. In any case, experts recommend:

1. Carry out regular do-it-yourself prevention of blockages by rinsing with hot water or using the best chemicals (vinegar, alkaline and acidic substances).
2. Be sure to explain to children the rules for using the toilet so that toys, pieces of paper and other things that cause a blockage do not get into it.
3. Apply chemicals only in accordance with the instructions and use gloves.
4. Always have a plunger on hand, which allows you to quickly break through a blockage in the toilet and remove dirt into the sewer pipe.
5. It is best to use two people to clean a clogged toilet using a plumbing cable.
6. Invite a specialist to clean the sewer pipe if you couldn’t break the plug in the toilet with your own hands (perhaps the problem is in the common riser, and not in a clogged drain).

A clogged toilet is like a nightmare. The appearance of this unwanted incident is absolutely sudden, and the solution to this problem cannot be delayed. Panicking, most of us start looking in our notebooks for the phone numbers of master plumbers with the hope that they will come running, like in the cartoon “Chip and Dale,” and in a matter of minutes they will correct the situation and the clogged toilet will sparkle again. But, alas, you can wait an hour, two, or even several days for the treasured master, which will turn your family’s life into a real nightmare. Therefore, it is imperative to know what to do if the toilet is clogged and does not work and the water does not drain at home. You will find information about this in this article.

Why does dirt in the toilet rise up and slowly pass?
Important! The first thing to do is to establish the cause of the clog in the toilet, and only after that make a decision on how to eliminate it.

Options for sewer clogging:

• The most common type of blockage is when human biological waste, when flushing water, does not go into the sewer pipe, but, on the contrary, pours out. This means that only your toilet is clogged.
• More a difficult situation- when the water does not go down the pipe, but pours out through the drain holes into the bathtub or sink. This suggests that, most likely, it is not your fault, just neighbors with upper floors the common riser was clogged.

Important! To solve this problem, you should find out whether the neighbors living above you have a clogged bathroom. Clear the blockage in general sewer riser Only a master plumber who has permission to service such networks can do so.

Causes of a “traffic jam” in the sewer:

• The first and most common cause of a “flood” due to a malfunctioning bathroom can be the use of large quantity toilet paper, throwing feminine hygiene products into the toilet, foreign objects, such as children's toys, floor rags and the like.
• Incorrect installation of the toilet. When replacing plumbing fixtures, you must comply correct angle inclination to the riser, as well as the distance from the riser to it.
• There is no background pipe or special valves that equalize the water supply pressure in the pipe when draining.
• Non-standard shape of the toilet or non-certified production of plumbing fixtures. Manufacturing details may not be observed.

Important! When purchasing plumbing fixtures, choose products famous brand with a quality certificate.

What to do if the toilet is clogged at home? Effective cleaning methods

There are several ways to eliminate such a problem that has befallen you:

• Folk - removing blockages using improvised means.
• Chemical - in this case, special household chemicals are used, presented in a sufficient assortment on store shelves.
• Mechanical - using special plumbing tools.

Traditional methods for clearing clogs

Sometimes, with minor problems, the most simple remedies, which every housewife has at hand.

Hot water

Is your toilet clogged? What to do at home? You can quickly and effectively remove a mild blockage using hot water.

Sequencing:

1. Bring about a bucket of water to a boil on the stove.
2. At right angles, quickly pour the contents directly into the drain.

Important! When working with hot water, follow safety precautions: wear protective gloves, remove animals and foreign objects.

1. If the water gradually disappears, repeat the process again.

Baking soda

There is a blockage in the toilet. What to do at home to get rid of this problem? Baking soda is an indispensable product in the kitchen for any housewife. With its help you can easily get rid of greasy marks on clothes, clean a burnt pan, wipe off dirt various surfaces and so on. You can also use soda if there is a sewer malfunction.

Sequencing:

1. Take a pack baking soda and pour it inside the toilet hole.

Important! Sometimes half a pack is enough.

1. Wait a while and try draining the water. Under the influence of alkali, the blockage will gradually dissolve.
2. If the toilet does not clean after one try, repeat the procedure again.

Important! For better impact You can also add a glass of vinegar. By reacting with soda, vinegar will lead to quick and high-quality results.

Special means for removing clogs

Water won't drain from the toilet? What to do? With the advent of special cleaning and cleaning products large quantity people prefer them over using traditional methods. Departments household chemicals, as well as specialized stores offer a wide range of sewer cleaning products.

Important! The products are produced in the form of powders, gels and granules, designed for one or several uses.

The following brands have the greatest consumer demand:

• Mole;
• Domestos;
• Mister Muscle;
• Tiret;
• Domol.

Having these substances at home, you can not only easily get rid of the problem with a clogged sewer, but also carry out a number of additional measures:

• Disinfection of plumbing fixtures;
• Getting rid of the unpleasant smell of old pipes;
• Preventive procedures aimed at preventing blockages inside pipes.

Important! Before using the product, read the instructions. Strictly adhere to the proportions of the substance indicated on the packaging. Follow safety precautions - some liquids have a pungent odor and can cause chemical burns.

If the water in the toilet does not drain well, what should you do in your apartment? normal operation they know the toilet experienced housewives. In this case, you can use some acids, for example, formic, hydrochloric or acetic.

Important! Acids should be used with extreme caution, as they can damage the material of the toilet bowl, as well as old pipes.

Mechanical methods for cleaning a toilet

If the water in the toilet does not drain, what should you do in a private home? Perfect for this mechanical options cleaning, of course, if you have special devices for such work.

plunger

This device is a must-have for home use. It consists of plastic or wooden handle, at the end of which there is a rubberized hemisphere. With its help, the sewer system is cleared of shallow, simple blockages.

Sequencing:

1. Place a plunger on the toilet outlet.
2. Pour a small amount of water into the toilet bowl until it covers the rubber base of the plunger.
3. With a sharp movement, press it inside the drain hole, then return it to initial position.
4. Continue these steps until the pipes are completely clear of the plug.

Corrugation cleaning

If the toilet was installed to the sewer through a corrugation, it is possible that the blockage is located there. To clean it, follow these steps:

Cleaning sequence:

1. Disconnect the corrugation from the toilet and inspect it carefully.
2. If the plug is there, wear protective gloves and remove the blockage.
3. Place the corrugation in its original position and drain the water several times.

Important! For prevention, you can pour it inside special remedy for cleaning drains.

Hot water supply via rubber hose

Is there still water in the toilet? What to do to break through the resulting traffic jam? The next method that we will offer you can be considered not only mechanical. Due to the supply of water under pressure, it should be classified as hydrodynamic.

Sequencing:

1. Connect one end of the hose to a hot water tap.

Important! If the bathroom is separate, the hose should be long enough to reach the toilet.

1. Place the free end into the drain hole as deeply as possible.
2. Turn on the hot water tap to create strong pressure.

Important! To achieve the best effect, pour a special mixture for clearing blockages into the drain hole.

Plastic bottle

If the toilet is clogged, what should you do? Sometimes a simple plastic bottle can help. A blockage is a problem that can appear quite suddenly, and if there is no the necessary tool, getting rid of it is unlikely. Exists alternative method, invented by folk craftsmen.

Cleaning method:

1. Take an empty one plastic bottle by 1.5-2 liters.
2. Use a sharp knife or scissors to cut off the curly bottom.
3. Screw the lid on the bottle neck tightly.
4. Insert the cut side of the bottle into the hole in the toilet.
5. Using movements like using a plunger, clear the blockage from the drain.

Plumbing cable

A special cable for cleaning pipes is not found in every household. He is considered professional tool, which is used by plumbers. But still, if you have such a tool, install a special attachment on the tip - it can be in the form of a spiral, wire antennae, or have a peak shape.

Cleaning method:

1. Lower the prepared cable into the drain hole of the bathroom until it stops.
2. Using the special handle installed at the other end, twist the cable clockwise.

Important! Such a cable can clear the deepest plugs in the sewer, as it is of sufficient length.

1. Pour a special product into the toilet and flush the water several times.

Call a plumber

When trying to cope with the problem yourself, none of the proposed options gave any result? We recommend calling a specialist immediately before the situation becomes completely critical.

If the water does not stop flowing, despite attempts to clean the pipes, there is only one conclusion: the riser is clogged below your floor. In this case, the upstairs neighbors, draining the water, will cause all the waste to overflow over the edges of the toilet and end up in your apartment. Only qualified sewer service specialists can remove such a blockage.

Preventing blockages in pipes

With enough information about what to do if your toilet won't drain, you can fix the clogged pipes yourself. But to prevent such situations from arising at all, you need to know some rules:

• Under no circumstances should you throw foreign objects into the toilet, and if they get in, remove them immediately.
• You shouldn’t throw leftover food down the toilet, even if it’s liquid. Grease if it gets on the pipes cold water settles firmly on them, each time making the passage narrower and narrower.

Sometimes residents are forced to decide whether it is permissible to take some measures themselves, to do something in the house if the toilet is clogged. A similar nuisance can occur due to throwing poorly soluble, fragmented garbage, large amounts of toilet paper, sanitary napkins, etc. into the toilet. Young children often conduct experiments by getting to the toilet and flushing diapers, toys, and other toys that are not intended for this purpose. items.

Sometimes residents are forced to decide whether it is permissible to take some measures themselves, to do something at home if the toilet is clogged

Pets, or more precisely, litter for their trays, can also cause a drain or sewer pipe to become clogged. Because it's hard to imagine less unpleasant event, it is necessary to monitor children, teach them how to use the toilet correctly, and also dispose of household waste and contents cat litter in another way, avoiding plumbing blockages.

Priority measures

As soon as it becomes noticeable that the water in the toilet is not flowing well, you should check whether there are any foreign objects or a dense lump of toilet paper in its visible depths. If any are present, they must be removed by first wearing rubber gloves. Then let the water drain and press the drain to make sure the problem is solved.

Sometimes blockages occur due to a narrowing of the internal opening due to accumulated salt deposits, food debris, or fermented homemade preserves. It's easy to prevent this from happening. Quite regularly, 3-4 times a year, pour special chemicals like Mole or Tiret into the toilet bowl at night. All plumbing pipes are subject to similar treatment to avoid blockages, since fat, salts, and lime microparticles form massive solid deposits over time. internal surfaces sewer lines.

If the water in the toilet does not drain well, what should you do? This problem needs to be dealt with as much as possible. short time, as it can quickly develop into a complete blockage of wastewater outflow. Any plumbing fixtures tend to get clogged if they are not cleaned regularly. Proper Maintenance toilet allows you to prevent the occurrence of such a problem, but if there is already a violation of the outflow, it is necessary to use the optimal ones for specific case ways to clear existing blockages.

Among other things, it should be borne in mind that water can not only drain slowly from the toilet: under certain conditions, the water level can rise. As a rule, such an unfavorable development of events is observed if the riser pipe in the area in front of the place where the toilet is connected to it is clogged. Thus, when flushing water from the upper floors at the bottom of the pipe, the pressure at the site of the blockage can increase significantly, which helps push some of the water into the closest toilet. In such an unfavorable scenario, only a qualified plumber can solve the problem.

The best household methods for clearing blockages

If the water in the toilet drains slowly, this may mean that the lumen of the pipes through which waste water moves is partially or completely blocked. When the pipes leading from the toilet to the riser are clogged, the water usually does not rise, which is extremely indicative in determining the area of ​​​​clogging. To remove the blockage in this case, it is quite possible to use household methods cleaning pipes.

Recently, quite a lot of different products have appeared on the market that allow you to dissolve chemical and organic matter which can clog toilet pipes. Such cleansers are sold both in the form of powders and in the form of gels or liquids. To remove a blockage using chemicals, you need to pour or fill the selected pipe cleaner into the toilet and let it sit.

The process of dissolving an existing blockage, even when using the most modern and effective chemicals of this type, may take certain time. When using household chemicals, you must strictly follow the instructions and do not try to exceed the prescribed dosage. Besides everything else, you can't mix various means when cleaning the toilet, as this can harm not only the toilet itself, but also the health of people living in the room, because a possible chemical reaction can trigger the release of a large amount of harmful fumes.

Another effective way to remove small blockages that impede the passage of water is to use a plunger. When using a plunger, pressure is created, causing the water and the clog-forming substance to rise, creating optimal conditions to remove the plug. If household methods pipe cleanings do not have the required effect and the water in the toilet continues to stagnate, the use of special professional means cleaning.

Professional methods for removing blockages

Currently, professional plumbers have a lot of devices in their arsenal that allow them to quickly remove existing blockages that are preventing the passage of water through pipes. In some cases, correct the situation if there is an outflow blockage sewer water Only a professional plumber can do this. The thing is that in the absence of timely cleaning, a special coating consisting of salts, food waste and other elements can form on the walls of the pipes. This plaque gradually thickens and increases in size, so over time it can cause problems with the flow of water from the toilet. Currently, the following options for professional removal of clogs in the toilet are widely used:

• mechanical;
• hydraulic;
• pneumatic.

The mechanical method of removing blockages involves the use of a long plumbing cable. The cable is a long wire with a special handle at one end.

Using a cable, you can quickly remove the existing blockage and accumulated water in the toilet. Using this mechanism is quite simple. First, the flexible cable passes into the toilet pipe, and even the presence of bends in the plumbing is not a serious obstacle for it. Next, you need to start moving the handle, from this the cable will also begin to perform rotational movements, and the elements that form the blockage will either disintegrate into smaller parts and be washed off with water, or they will cling to the cable, which will allow them to be removed without the slightest difficulty.

The hydraulic method of removing blockages is extremely effective if the blockage is formed by fatty deposits, which are difficult to remove by other means.

To carry out this procedure, a hose is used that is connected to a hot water tap. Next, the pressure is turned on and the pipe at the site of the blockage is washed. It is worth noting that this option for removing a blockage is acceptable only for professionals, since if the technique for performing this procedure is not followed, an increase in pressure down the pipe may occur and water may leak out of the toilet of the neighbors below.

When using the pneumatic option for cleaning the toilet, they often use regular vacuum cleaner, which has a blowing function. In this case, the vacuum cleaner hose is connected to the blowout hole. A fairly intense stream of air begins to blow out through the hose. The solid tube to which the vacuum cleaner hose is attached must be directed into the clogged toilet. When using this cleaning method, you must constantly ensure that the air pressure goes into the bend of the pipe.