Articles about the work of the chief power engineer of the enterprise. Regulations on the department of the chief power engineer
Read also
Chief Power Engineer- this is the person who is obliged to ensure the operability of all energy equipment of a particular enterprise. He must be competent to inspect or examine this equipment. This is an explanation of the main functions performed by a person who is appointed to such a position.
But in fact, this work is much more complicated, has many nuances that can be understood and studied only after familiarization with such a document as job description chief power engineer.
General characteristics of the profession
The job description of the chief power engineer of an enterprise implies that only a person who has a higher education (that is, a master’s or specialist’s diploma) and at least 5 years of experience as an engineering manager has the right to occupy such a position. Only if you have such data can you count on a vacancy as a chief power engineer at a good, promising enterprise.
Only the immediate manager of the organization that opened such a vacancy has the right to appoint a person to such a position. Only a representative of the management team can also fire.
The job description of the chief power engineer of the enterprise also states that he can receive orders directly from the manager of the management level or from the chief engineer.
Each chief power engineer (regardless of the size of the enterprise) must have a deputy. The job description of the deputy chief power engineer implies that during the leave of the head of the unit, all his responsibilities are transferred to the deputy. He also becomes responsible for making certain decisions and for the condition of the enterprise’s power equipment as a whole.
What are the responsibilities of the chief specialist?
The job description of the chief power engineer implies full responsibility for ensuring normal operating conditions for power equipment, as well as for its timely repair. Energy systems in general are an area for which the chief energy engineer is also responsible. He must constantly monitor that the enterprise uses resources such as gas and water as rationally as possible and maintains optimal economy.
"Paper" duties
About the rights and responsibilities of this specialist
Any job description must have subclauses that regulate not only the specialist’s responsibilities, but also his rights. Only then will controversial issues related to abuse of power be resolved quickly and on the basis of basic regulatory documentation.
Basic rights of the chief power engineer
The chief power engineer - the job description of any enterprise confirms this - is the specialist who has every right to act on behalf of the enterprise for which he works. This means that he has the right to represent the interests of the organization both on the scale of individual relations and on the scale of enterprises as a whole, if such a decision was made by management.
He has the right to receive without delay information or data that should be provided by the heads of other structural units, if such data is necessary for normal process performing his immediate duties.
The chief power engineer has the right to work time check the activities of other structural divisions of your enterprise in order to analyze the quality of execution energy services production in one department or another. If necessary, he also has the right to turn off some steam, thermal or electrical installations if there are objective reasons for this.
If it is planned to prepare draft instructions that will relate to energy services, the chief energy engineer has every right to take part in the process of this preparation.
A special right that every chief power engineer should know about
One of the main rights of the chief power engineer is the right to independently make decisions regarding the removal from duties or transfer to another of employees of the energy department who, for objective reasons, have not passed the test of knowledge of safety rules and energy supply rules. In addition, the chief power engineer - the job description stipulates this moment too - can submit for consideration directly to senior level managers the issue of disciplinary or financial liability of employees whose inspection results turned out to be unsatisfactory.
About the responsibility that this specialist bears
The chief power engineer must understand that for failure to comply or gross violation of the points provided for in the job description, he will be held responsible:
- For offenses (within not only administrative, but also labor, and even criminal codes) that were committed by a specialist during the performance of his direct official duties, he will be directly responsible.
- Causing material damage is also a reason that leads to liability if this complies with the laws and is provided for by the legislative framework.
Details about the job description of the chief power engineer in housing and communal services
The job description of the chief power engineer in the housing and communal services sector has some specific features that anyone interested in a similar position should know about. Unlike an ordinary enterprise, the housing and communal services sector has a completely different direction of activity, which is why the job description of an energy specialist is also undergoing some modifications. Each individual housing and communal services develops its own job description, which corresponds to the letter of the law. One of the main features of this particular area of activity of chief power engineers is that they can directly interact and represent the interests of housing and communal services not only at the level of different departments, but also at the level of resolving issues with other housing and communal services.
Job description of the chief power engineer in construction: specifics
Today, many are interested in the position of chief power engineer in a construction organization, because, as unshakable statistics say, it is at such enterprises that the chief power engineer earns relatively more than, for example, at any
The job description of the chief power engineer of a construction organization complies with the letter of the law, but at the same time implies that a specialist who wishes to obtain such a position must have in-depth knowledge of the specifics of the activity construction organizations. Such conditions are justified by the fact that this job description is developed on the basis qualification characteristics such a staff unit as the chief power engineer of a construction organization.
Some statistical studies have shown interesting results, according to which employers have an idea of the ideal chief energy officer, and meeting certain parameters increases your chances of getting that particular position.
Preference will only be given to a person with higher education, whose age ranges from 30-50 years (that is, he already has good work experience). In 99% of cases, managers want to see a man in this position. A big plus there will also be the presence of V. Knowledge in English- this is also a big advantage.
An applicant with significant work experience can expect a promotion wages, while an applicant without experience will have to agree to the proposed conditions and rate.
Added to the site:
1. General Provisions
1.1. The department of the chief power engineer, being an independent structural division of the enterprise, is created and liquidated by order of [name of the position of the head of the enterprise].
1.2. The department reports directly to the technical director of the enterprise.
1.3. The department is headed by the chief power engineer, appointed to the position by order of [name of the position of the head of the enterprise] on the recommendation of the technical director (chief engineer).
1.4. The chief power engineer has the [meaning] of a deputy(s); his/her responsibilities are determined by the chief power engineer.
1.5. The deputy(s) and other employees of the department are appointed to positions and dismissed from positions by order of [name of the position of the head of the enterprise] on the proposal of the chief power engineer.
1.6. In its activities the department is guided by:
Charter of the enterprise;
This provision;
Legislation of the Russian Federation;
1.7. [Enter as appropriate].
2. Structure
2.1. The structure and staffing level of the department is approved by [name of the position of the head of the enterprise], based on the specific conditions and characteristics of the enterprise’s activities, on the proposal of the technical director and chief power engineer, as well as in agreement with the [HR department, organization and remuneration department].
2.2. The department of the chief power engineer may include structural units (bureaus, groups, laboratories, etc.).
For example: energy bureau (sector, group); electrical equipment group; thermal power and plumbing equipment; electrical repair shop; energy shop; ventilation bureau (sector, group); bureau (sector, group) of scheduled maintenance; group on electrical measurements of instrumentation and automation; radio center; telephone exchange.
2.3. Regulations on the divisions of the department of the chief energy engineer (bureaus, sectors, groups, etc.) are approved technical director, and the distribution of responsibilities between department employees is carried out by the chief power engineer.
2.4. [Enter as appropriate].
3. Objectives
The department of the chief power engineer is assigned the following tasks:
3.1. Uninterrupted supply of the enterprise with all types of energy.
3.2. Safety of energy equipment and its rational operation.
3.3. Carrying out measures to save energy and increase the power of power plants.
3.4. Increased efficiency energy networks.
3.5. Rational distribution of energy.
3.6. Development of the energy sector in accordance with the growth of the enterprise's production capacity.
3.7. [Enter as appropriate].
4. Functions
The department of the chief power engineer performs the following functions:
4.1. Organization of operation and timely repair of energy and environmental equipment and energy systems.
4.2. Uninterrupted supply of electricity, steam, gas, water and other types of energy to production.
4.3. Control over the rational use of energy resources at the enterprise.
4.4. Planning the work of energy shops and farms.
4.5. Development of repair schedules for power equipment and power networks.
4.6. Development of plans for the production and consumption of electricity, process fuel, steam, gas, water by the enterprise, compressed air, consumption rates and modes of consumption of all types of energy.
4.7. Drawing up applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional capacity to energy supply organizations.
4.8. Participation in the development of plans for the long-term development of the energy sector, plans for increasing production efficiency, in the preparation of proposals for reconstruction, technical re-equipment enterprises, implementation of complex mechanization and automation means production processes.
4.9. Development of measures to reduce energy consumption standards, introduce new equipment that contributes to more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
4.10. Consideration of projects for reconstruction and modernization of energy supply systems of the enterprise and its divisions.
4.11. Drawing up technical specifications for the design of new and reconstruction of existing energy facilities.
4.12. Preparation of conclusions on developed projects.
4.13. Participation in testing and acceptance of power plants and networks for commercial operation.
4.14. Examination communications, alarm, accounting, control, protection and automation.
4.15. Carrying out work to protect underground structures and communications.
4.16. Timely presentation of boilers and pressure vessels to bodies exercising state technical supervision.
4.17. Development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of power installations, the prevention of accidents, the creation of safe and favorable conditions labor during their operation.
4.18. Monitoring compliance with rules labor protection and safety precautions, instructions for the operation of power installations and the use of power equipment and networks.
4.19. Concluding agreements with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy in accordance with the legislation of the Russian Federation.
4.20. Storage, accounting of the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
4.21. Carrying out certification and rationalization of workplaces.
4.22. Introduction of new progressive methods of repair and operation of power equipment.
4.23. Preparation of opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply.
4.24. [Enter as appropriate].
5. Rights
The department of the chief power engineer has the right:
5.1. Give instructions on the operation and repair of power equipment.
5.2. Make decisions on changes to technology for servicing energy equipment.
5.3. Require from heads of production and technical departments:
Compliance with the prescribed standards for operation and maintenance of power equipment;
Timely provision of information about violations of energy equipment maintenance technology;
Immediate reporting of breakdowns of power equipment;
- [fill in what you need].
5.5. Stop the operation of power equipment in the event of a threat of emergency or accident.
5.6. Carry out forced repairs (stop equipment operation) in case of violation of the rules for operating power equipment.
5.7. Do not allow earthworks on the territory of the enterprise without proper approval and registration.
5.8. Remove from work workers who have not received appropriate training.
5.9. Instruct individual structural divisions of the enterprise to carry out work on maintenance energy equipment.
5.10. Participate in development technical specifications, instructions.
5.11. The chief power engineer has the right to submit proposals to management on incentives for distinguished employees, as well as on bringing to disciplinary action employees who violate production and labor discipline.
5.12. [Enter as appropriate].
6. Relationships (official connections) **
To perform the functions and exercise the rights provided for by these regulations, the department of the chief power engineer interacts:
6.1. With the department of the chief technologist regarding:
Receipts:
Power equipment placement plan;
Energy equipment modernization plans;
Technological documentation for power equipment;
Proposals for improving the process of servicing energy equipment;
- [fill in what you need].
Providing:
Passports for the power equipment used;
Information about changes and additions to the passport data of power equipment;
- [fill in what you need].
6.2. With the chief mechanic department regarding:
Receipts:
Applications for development electrical diagrams devices necessary to perform repair work;
Applications for equipment connection;
Applications for power outages;
Preventive maintenance schedules;
- [fill in what you need].
Providing:
Schedules of preventive maintenance work on electrical equipment;
Notifications about the execution of applications for connecting additional and newly installed repair equipment;
Notifications about the execution of requests for temporary power outages to carry out repair work;
Development of electrical circuits;
- [fill in what you need].
6.3. With the standardization department on issues:
Receipts:
Standards;
Instructions;
Technical conditions;
Conclusions on technical documentation for compliance with current legislation on standardization;
Work plans for standardization, normalization, unification;
Information about the transfer of the enterprise to new standards;
Notices of changes and additions to standards and technical specifications;
- [fill in what you need].
Providing:
Documentation on maintenance and repair of power equipment;
Proposals for carrying out standardization work;
Proposals for transferring the enterprise to new standards;
Information about violation of standards and technical conditions;
- [fill in what you need].
6.4. With the patent and inventive work for questions:
Receipts:
Applications for expert assessment rationalization proposals and inventions;
Plans for the implementation of rationalization proposals and inventions;
Assistance in solving assigned tasks;
- [fill in what you need].
Providing:
Conclusions on rationalization proposals and inventions;
Assistance in technological solutions to individual issues;
Assistance in making drawings and making models;
Opportunities for experimental verification of inventions;
- [fill in what you need].
6.5. With department technical information for questions:
Receipts:
Technical documentation;
Technical literature;
Applications for copies of technical documentation of the department;
- [fill in what you need].
Providing:
Copies of technical documentation of the department;
Original documents for registration, accounting and storage;
Applications for technical literature;
- [fill in what you need].
6.6. With the labor protection department on issues:
Receipts:
Information about the requirements of labor protection legislation;
Conclusions on the technology of maintenance and repair of power equipment for compliance with safety standards;
- [fill in what you need].
Providing:
Information on compliance with labor protection legislation;
Applications for opinions on technology for maintenance and repair of power equipment for compliance with safety regulations;
- [fill in what you need].
6.7. With the department of organization and remuneration on issues:
Receipts:
Consultations on labor legislation;
Approved staffing table;
Tasks to reduce labor intensity by improving the technology of repair and maintenance of power equipment;
- [fill in what you need].
Providing:
Proposals for the formation of staffing;
Reports on the implementation of instructions to reduce labor costs;
- [fill in what you need].
6.8. With the planning and economic department on issues:
Receipts:
Product production plans;
Instructions for saving money;
Assessments of the economic efficiency of using energy equipment;
- [fill in what you need].
Providing:
Plans for carrying out preventive work;
Calculation of the need for electricity, steam, water, compressed air and other types of energy;
- [fill in what you need].
6.9. With the chief accounting department on issues:
Receipts:
Acts for write-off, transfer, sale of power equipment;
Allocation data Money department;
Analysis of the rate of expenditure of funds;
- [fill in what you need].
Providing:
List of power equipment subject to write-off and removal from the balance sheet;
List of unused power equipment subject to transfer and sale;
Acts of repair of power equipment;
Applications for payment for ordered energy equipment;
- [fill in what you need].
6.10. From [name of structural unit] on issues:
Receipts:
- [enter as required];
- [fill in what you need].
Providing:
- [enter as required];
- [fill in what you need].
7. Responsibility
7.1. The chief power engineer is responsible for the quality and timeliness of the department’s performance of the functions provided for by these regulations.
7.2. The chief power engineer is personally responsible for:
Compliance with current legislation in the process of managing the department;
Presentation of reliable information on the state of energy networks;
Timely and high-quality execution of instructions from management;
Preventing the use of outdated technologies that can cause energy losses (if it is possible to use new, improved ones).
- [fill in what you need].
7.3. The responsibilities of the employees of the chief power engineer department are established by job descriptions.
7.4. [Enter as appropriate].
Head of structural unit
[initials, surname]
[signature]
[day month Year]
Agreed:
[executive, with which the provision is consistent]
[initials, surname]
[signature]
[day month Year]
Head of the legal department
[initials, surname]
[signature]
[day month Year]
Chief Power Engineer must comply with the following qualification requirements- obtain a higher technical education and work experience in a specialty in engineering and technical leadership positions at least 5 years.
Job responsibilities of the chief power engineer
The chief power engineer organizes the technically correct operation and timely repair of energy and environmental equipment and energy systems, the uninterrupted supply of electricity, steam, gas, water and other types of energy to production, control over the rational use of energy resources at the enterprise, and consistent adherence to the economy regime.
Manages the planning of the work of energy workshops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
Ensures the preparation of applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption standards, the introduction of new equipment that contributes to more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
The chief power engineer participates in the development of plans for the long-term development of the energy sector, plans for increasing production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of complex mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical assignments for the design of new and reconstruction of existing energy facilities.
Ensures that work is carried out to protect underground structures and communications, organizes inspections of communications, alarms, accounting, control, protection and automation, as well as timely submission of boilers and pressure vessels to the Gosgortekhnadzor inspection. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of the operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation.
Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
The chief power engineer enters into contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.
Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
Carries out work to exchange experience in the field of operation of power equipment, ensures the implementation scientific organization labor in energy sector areas, certification and rationalization of jobs, new progressive methods of repair and operation of energy equipment. Gives opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
The chief power engineer manages the employees of the department and divisions of the enterprise that carry out energy production service.
Feedback and suggestions can be sent to: [email protected]
The information is provided for informational purposes only and is not an official source.
Chief power engineer: requirements, knowledge and responsibilities
Few people know that in large factories and enterprises one of the most important people is the chief power engineer. It monitors the distribution of energy resources: electricity, heat. He also organizes reliable power supply and competent technical operation of energy systems, which affects the profitability of any enterprise. At any more or less large plant, this position is held in high esteem, but it requires a huge amount of knowledge and experience.
Main responsibilities
The chief power engineer is organizing correct operation, repair and installation of power equipment, uninterrupted and reliable supply of power to production. This official controls the consumption of energy resources and compliance with their saving regime. The department of the chief power engineer is responsible for planning, organizing and implementing efficient work energy sector, develops repair schedules for equipment and electrical networks, plans for the production or consumption of electricity, fuel, gas, steam, water. This official is responsible for drawing up applications and calculations for them for the purchase of equipment, spare parts and necessary materials, for the supply of energy, for connecting additional power if necessary. Plans the prospects for the development of the energy sector, increasing the overall efficiency of production, prepares proposals for the reconstruction of the enterprise, and introduces process automation tools.
The job description of the chief power engineer necessarily includes the consideration of projects for the reconstruction of energy supply systems. The leading power engineer is obliged to give opinions on all developed electric power projects and take part in testing power installations and networks. He is also obliged to ensure the development of measures aimed at increasing the efficiency of resource use, increasing the reliability and operation of power plants, preventing accidents, and creating safe conditions labor. The chief power engineer monitors compliance with labor protection and safety regulations, all necessary instructions manual. He must and has the right to enter into contracts for the supply of electricity and other types of energy. This person organizes accounting and storage of energy equipment on the enterprise's balance sheet, analysis of fuel and electricity consumption. The chief power engineer manages all employees of his department, organizes work to improve their qualifications, recruits new personnel, deals with retraining issues if necessary, and carries out the necessary certification of personnel.
What should I know?
Methodological and regulatory materials on electrical power services of a particular enterprise. Must understand the specialization, profile and characteristics of the enterprise, opportunities and prospects, the basics of product production. Mandatory knowledge of the system of planned and preventative repairs includes his job description. The chief power engineer is also required to know specifications and features of the operation of equipment at the enterprise, rules for operating these installations. The job description includes requirements for knowledge of the rules for accepting equipment after repair and installation, and environmental legislation. The chief power engineer must be able to conclude supply contracts for the company electrical energy and warmth.
Requirements
The chief engineer of an enterprise must have a higher technical education. In addition, at least five years of experience in a specialized specialty in administrative, technical and managerial positions in the relevant industry is required. In addition to having fairly extensive skills and knowledge, the leading power engineer is required to have organizational skills, since he manages his staff.
Services managed by the chief power engineer
There are several services that report to this official:
Electrical technical service, which includes operational, maintenance and duty personnel;
Thermal engineering department, which manages boiler rooms, drainage and water supply services and which includes plumbers and maintenance personnel;
Gas service, which includes employees involved in the repair and operation of gas systems.
Job description of the chief power engineer
"____" ____________ 20__
1.1. This job description defines the functional duties, rights and responsibilities of the chief power engineer [Name of organization in genitive case] (hereinafter referred to as the Company).
1.2. The chief power engineer is appointed to the position and dismissed from the position as established by the current labor legislation by order of the head of the Company.
1.3. The chief power engineer reports directly to [name of the position of the immediate supervisor in dative case] Companies.
1.4. The chief power engineer belongs to the category of managers and is subordinate to [the names of the positions of subordinates in the dative case].
1.5. A person with a higher professional (technical) education and work experience in his specialty in engineering, technical and managerial positions in the relevant industry profile of the enterprise is appointed to the position of chief power engineer. National economy at least 5 years.
1.6. The chief power engineer is responsible for:
- effective performance of the work assigned to him;
- compliance with the requirements of performance, labor and energy discipline;
- the safety of documents (information) in his custody (that have become known to him) containing (constituting) a trade secret of the organization.
1.7. The chief power engineer must know:
- regulatory and teaching materials for energy services of the enterprise;
- profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development;
- fundamentals of the production technology of the enterprise's products;
- organization of energy supply for production in the industry and enterprise;
- A unified system of scheduled preventive maintenance and rational operation of equipment;
- production capacity, technical characteristics, design features and operating modes of power equipment, energy-using installations, rules of their operation;
- procedure and methods for planning equipment operation and carrying out repair work;
- regulations, instructions and other guidance materials on the development and execution of technical documentation;
- rules for acceptance and delivery of equipment after installation and repair;
- environmental legislation;
- requirements rational organization labor during operation, repair and modernization of power equipment;
- the procedure for developing standards for the consumption of fuel and energy resources;
- the procedure for concluding contracts for the supply of electricity, steam, water and other types of energy to an enterprise;
- advanced domestic and foreign experience in the field of energy supply for production;
- fundamentals of economics, organization of production, labor and management;
- basics of labor legislation;
- rules and regulations of labor protection.
1.8. The chief power engineer in his activities is guided by:
- local acts and organizational and administrative documents of the Company;
- internal labor regulations;
- rules of labor protection and safety, ensuring industrial sanitation and fire protection;
- instructions, orders, decisions and instructions from the immediate supervisor;
- this job description.
1.9. During the period of temporary absence of the chief power engineer, his duties are assigned to [deputy position title].
2. Functional responsibilities
The chief power engineer performs the following labor functions:
2.2. Manages the organization and planning of the work of energy workshops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
2.3. Ensures the preparation of applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption standards, the introduction of new equipment that contributes to more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
2.4. Participates in the development of plans for the long-term development of the energy sector, plans for increasing production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of complex mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for design of new and reconstruction of existing energy facilities.
2.5. Gives opinions on developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
2.6. Ensures the implementation of work to protect underground structures and communications, organizes the inspection of communications, alarms, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the bodies carrying out state technical supervision.
2.7. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation.
2.8. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
2.9. Concludes contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.
2.10. Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
2.11. Conducts work to exchange experience in the field of operation of energy equipment, savings and rational use fuel and energy resources, contributes to the achievement of high performance indicators for the operation of power plants.
2.12. Provides improvement of labor organization in energy sector areas, certification and rationalization of jobs, introduction of new progressive methods of repair and operation of energy equipment.
2.13. Gives opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
2.14. Manages the employees of the department and divisions of the enterprise that provide energy services to production, organizes work to improve the skills of workers.
In case of official necessity, the chief power engineer may be involved in performing his duties overtime, in the manner prescribed by the provisions of federal labor legislation.
3.2. Monitor the implementation of production tasks, timely completion of individual orders and tasks by subordinate services.
3.3. Request and receive necessary materials and documents related to the activities of the chief power engineer, subordinate services and divisions.
3.4. Interact with other enterprises, organizations and institutions on production and other issues within the competence of the chief power engineer.
4. Responsibility and performance evaluation
4.1. The chief power engineer bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:
4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.
4.1.2. Failure to perform or improper performance of one's job functions and assigned tasks.
4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work assigned to him.
4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to ensure compliance with labor discipline.
4.2. The assessment of the work of the chief power engineer is carried out:
4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his work functions.
4.2.2. The certification commission of the enterprise - periodically, but at least once every two years, based on documented results of work for the evaluation period.
4.3. The main criterion for assessing the work of the chief power engineer is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5.1. The work schedule of the chief power engineer is determined in accordance with the internal labor regulations established by the Company.
5.2. Due to production needs, the chief power engineer is required to travel to business trips(including local significance).
5.3. Due to production needs, the chief power engineer may be provided with official vehicles to carry out his work functions.
6.1. To ensure his activities, the chief power engineer is given the right to sign organizational and administrative documents on issues included in his functional responsibilities.
I have read the instructions ___________/___________/ “____” _______ 20__
Responsibilities of the chief power engineer at the enterprise
1.1. This job description defines the functional duties, rights and responsibilities of the Chief Power Engineer of the enterprise.
1.2. The chief power engineer is appointed and dismissed in accordance with the procedure established by current labor legislation by order of the director of the enterprise.
1.3. The chief power engineer reports directly to the director of the enterprise.
1.4. A person with a higher professional (technical) education and professional experience in engineering, technical and managerial positions in the relevant industry profile of the enterprise is appointed to the position of Chief Power Engineer.
1.5. The chief power engineer must know:
Regulatory and methodological materials on energy services of an enterprise; profile, specialization and features of the organizational and energy structure of the enterprise, prospects for its development; fundamentals of energy production of enterprise products; organization of energy supply for production in the industry and enterprise; A unified system of scheduled preventive maintenance and rational operation of equipment; production capacities, technical characteristics, design features and operating modes of energy equipment, energy-using installations, rules of their operation; procedure and methods for planning equipment operation and carrying out repair work; labor during operation, repair and modernization of power equipment; the procedure for developing standards for the consumption of fuel and energy resources; the procedure for concluding contracts for the supply of electricity, steam, water and other types of energy to an enterprise; advanced domestic and foreign experience in the field of energy supply for production; fundamentals of economics, organization of production, labor and management; basics of labor legislation; rules and regulations of labor protection, regulatory and methodological materials on energy preparation of production; profile, specialization and features of the organizational and energy structure of the enterprise; prospects for technical development of the industry and enterprise; energy production of enterprise products; systems and design methods; organization of energy preparation of production in the industry and at the enterprise; production capacities, technical characteristics, design features and operating modes of equipment, rules of its operation; procedure and methods for planning energy preparation of production; technical requirements requirements for raw materials, materials and finished products; regulations, instructions and other guidance materials on the development and execution of technical documentation; means of mechanization and automation of production processes; methods for determining the economic efficiency of introducing new technology and energy, labor organization, rationalization proposals and inventions; procedure for certification of the quality of industrial products; possibilities of using funds computer technology and methods for designing energy processes using them; procedure for accepting equipment into operation; requirements for rational organization of labor when designing energy processes; domestic and foreign achievements of science and technology in the relevant industry; advanced domestic and foreign experience in the production of similar products; fundamentals of economics, organization of production, labor and management; basics of environmental legislation; basics of labor legislation; rules and regulations of labor protection.
1.6. During the period of temporary absence of the Chief Power Engineer, his duties are assigned to ___________________________.
2. FUNCTIONAL RESPONSIBILITIES
Note. The functional responsibilities of the Chief Power Engineer are determined on the basis and to the extent of the qualification characteristics for the position of Chief Power Engineer and can be supplemented and clarified when preparing a job description based on specific circumstances.
2.1. Organizes the technically correct operation and timely repair of energy and environmental equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy to production, monitoring the rational use of energy resources at the enterprise, consistent adherence to the economy regime.
2.2. Manages the organization and planning of the work of energy workshops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, energy fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
2.3. Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to production, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of means of complex mechanization and automation of production processes , in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for the design of new and reconstruction of existing energy facilities.
2.4. Gives opinions on developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
2.5. Ensures the implementation of work to protect underground structures and communications, organizes the inspection of communications, alarms, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the bodies carrying out state technical supervision.
2.6. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
2.7. Concludes contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.
2.8. Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
2.9. Conducts work to exchange experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, and promotes the achievement of high performance indicators in the operation of power plants.
2.10. Provides improvement of labor organization in energy sector areas, certification and rationalization of jobs, introduction of new progressive methods of repair and operation of energy equipment.
2.11. Gives opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
2.12. Manages the employees of the department and divisions of the enterprise that provide energy services to production, organizes work to improve the skills of workers.
3. RIGHTS
The chief power engineer has the right:
3.1. Give instructions and tasks to his subordinate employees and services on a range of issues included in his functional responsibilities.
3.2. Monitor the implementation of production tasks, timely execution of individual orders by subordinate services and divisions.
3.3. Request and receive the necessary materials and documents related to the activities of the Chief Power Engineer, his subordinate services and divisions.
3.4. Interact with other enterprises, organizations and institutions on energy supply issues and other issues within the competence of the Chief Power Engineer.
4. RESPONSIBILITY
The chief power engineer is responsible for:
4.1. Results and efficiency of production activities related to its functional responsibilities specified in section 2 of these Instructions.
4.2. Inaccurate information about the status of implementation of work plans of subordinate services and departments.
4.3. Failure to comply with orders, instructions and instructions from the director of the enterprise.
4.4. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that create a threat to the activities of the enterprise and its employees.
4.5. Failure to ensure compliance with labor and performance discipline by employees of subordinate services and employees subordinate to the Chief Power Engineer.
5. RIGHT OF SIGNATURE. OPERATING MODE
5.1. To ensure his activities, the chief power engineer is given the right to sign organizational and administrative documents on issues included in his functional responsibilities.
5.2. The working hours of the Chief Power Engineer are determined in accordance with the Internal Labor Regulations established at the enterprise.
5.3. Due to production needs, the Chief Power Engineer may go on business trips (including local ones).
5.4. To resolve operational issues related to ensuring production activities, the Chief Power Engineer may be allocated official vehicles.
1. GENERAL PROVISIONS
1.1. This job description defines the functional duties, rights and responsibilities of the Chief Power Engineer of the enterprise.
1.2. The chief power engineer is appointed and dismissed in accordance with the procedure established by current labor legislation by order of the director of the enterprise.
1.3. The chief power engineer reports directly to the director of the enterprise.
1.4. A person with a higher professional (technical) education and work experience in the specialty in engineering, technical and management positions in the relevant industry profile of the enterprise is appointed to the position of Chief Power Engineer.
1.5. The chief power engineer must know:
Regulatory and methodological materials on energy services of an enterprise; profile, specialization and features of the organizational and energy structure of the enterprise, prospects for its development; fundamentals of energy production of enterprise products; organization of energy supply for production in the industry and enterprise; A unified system of scheduled preventive maintenance and rational operation of equipment; production capacities, technical characteristics, design features and operating modes of energy equipment, energy-using installations, rules of their operation; procedure and methods for planning equipment operation and carrying out repair work; labor during operation, repair and modernization of power equipment; the procedure for developing standards for the consumption of fuel and energy resources; the procedure for concluding contracts for the supply of electricity, steam, water and other types of energy to an enterprise; advanced domestic and foreign experience in the field of energy supply for production; fundamentals of economics, organization of production, labor and management; basics of labor legislation; rules and regulations of labor protection, regulatory and methodological materials on energy preparation of production; profile, specialization and features of the organizational and energy structure of the enterprise; prospects for technical development of the industry and enterprise; energy production of enterprise products; systems and design methods; organization of energy preparation of production in the industry and at the enterprise; production capacities, technical characteristics, design features and operating modes of equipment, rules of its operation; procedure and methods for planning energy preparation of production; technical requirements for raw materials, materials and finished products; regulations, instructions and other guidance materials on the development and execution of technical documentation; means of mechanization and automation of production processes; methods for determining the economic efficiency of introducing new technology and energy, labor organization, rationalization proposals and inventions; procedure for certification of the quality of industrial products; possibilities of using computer technology and methods for designing energy processes using them; procedure for accepting equipment into operation; requirements for rational organization of labor when designing energy processes; domestic and foreign achievements of science and technology in the relevant industry; advanced domestic and foreign experience in the production of similar products; fundamentals of economics, organization of production, labor and management; basics of environmental legislation; basics of labor legislation; rules and regulations of labor protection.
1.6. During the period of temporary absence of the Chief Power Engineer, his duties are assigned to ___________________________.
2. FUNCTIONAL RESPONSIBILITIES
Note. The functional responsibilities of the Chief Power Engineer are determined on the basis and to the extent of the qualification characteristics for the position of the Chief Power Engineer and can be supplemented and clarified when preparing a job description based on specific circumstances.
2.1. Organizes the technically correct operation and timely repair of energy and environmental equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy to production, monitoring the rational use of energy resources at the enterprise, consistent adherence to the economy regime.
2.2. Manages the organization and planning of the work of energy workshops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, energy fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
2.3. Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to production, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of means of complex mechanization and automation of production processes , in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for the design of new and reconstruction of existing energy facilities.
2.4. Gives opinions on developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
2.5. Ensures the implementation of work to protect underground structures and communications, organizes the inspection of communications, alarms, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the bodies carrying out state technical supervision.
2.6. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
2.7. Concludes contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.
2.8. Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
2.9. Conducts work to exchange experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, and promotes the achievement of high performance indicators in the operation of power plants.
2.10. Provides improvement of labor organization in energy sector areas, certification and rationalization of jobs, introduction of new progressive methods of repair and operation of energy equipment.
2.11. Gives opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
2.12. Manages the employees of the department and divisions of the enterprise that provide energy services to production, organizes work to improve the skills of workers.
3. RIGHTS
The chief power engineer has the right:
3.1. Give instructions and tasks to his subordinate employees and services on a range of issues included in his functional responsibilities.
3.2. Monitor the implementation of production tasks, timely execution of individual orders by subordinate services and divisions.
3.3. Request and receive the necessary materials and documents related to the activities of the Chief Power Engineer, his subordinate services and divisions.
3.4. Interact with other enterprises, organizations and institutions on energy supply issues and other issues within the competence of the Chief Power Engineer.
4. RESPONSIBILITY
The chief power engineer is responsible for:
4.1. The results and efficiency of production activities related to his functional responsibilities specified in Section 2 of these Instructions.
4.2. Inaccurate information about the status of implementation of work plans of subordinate services and departments.
4.3. Failure to comply with orders, instructions and instructions from the director of the enterprise.
4.4. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that create a threat to the activities of the enterprise and its employees.
4.5. Failure to ensure compliance with labor and performance discipline by employees of subordinate services and employees subordinate to the Chief Power Engineer.
5. RIGHT OF SIGNATURE. OPERATING MODE
5.1. To ensure his activities, the chief power engineer is given the right to sign organizational and administrative documents on issues included in his functional responsibilities.
5.2. The working hours of the Chief Power Engineer are determined in accordance with the Internal Labor Regulations established at the enterprise.
5.3. Due to production needs, the Chief Power Engineer may go on business trips (including local ones).
5.4. To resolve operational issues related to ensuring production activities, the Chief Power Engineer may be allocated official vehicles.
Other instructions in the section:
1. Job description of the chief power engineer of the enterprise
1. General provisions.
The chief power engineer is appointed to the position and dismissed by order of the director, the head of the given enterprise, individual entrepreneur, sole proprietor, chairman of the cooperative (employer). Appointed from among the administrative and technical personnel.
Reports to the director of the enterprise.
Under the jurisdiction of Ch. energy are:
Transformer substations, electrical installations, electrical equipment, electrical devices and electrical wiring.
2. Tasks and Responsibilities:
1.Provide maintenance, operation and maintenance electrical installations in accordance with the requirements of current regulatory and technical documentation.
2.Develop and implement organizationally - technical events which include:
Timely and high-quality repairs electrical equipment.
Reducing accidents and injuries in electrical installations.
3. Participate in the investigation, recording and analysis of accidents and incidents and taking measures to eliminate the causes of their occurrence.
4. Develop job descriptions and manufacturing instructions for company employees.
5. Develop and implement measures to save energy resources and increase power factor.
6. Implement new technology into electrical engineering.
7. Organize and promptly conduct preventive tests of electrical equipment.
8. Organize training, instruction and periodic testing of the knowledge of subordinates.
9. Systematically monitor the load and electricity consumption schedule and take measures to maintain the regime established by the power system.
10. Determine the need and ensure the supply of materials and spare parts, tools and accessories.
11. Develops and monitors the implementation of annual and monthly maintenance schedules for equipment, manages the repair of electrical parts, technological and special equipment.
12. Develops fundamental, operational, executive schemes and passports of energy networks, installations, equipment.
13. Provides work on modernization and automation of equipment and networks.
14. Implements behind hidden installation work. Accepts electrical equipment and networks for operation in accordance with the rules.
15. Responsible for the technical safety and organization of operation of energy facilities.
16. Responsible for timely verification protective equipment, electrical insulation, grounding, electrical equipment.
17. Develops and submits for approval to management norms and limits for electrical energy consumption.
18. Supervises measuring instruments.
19. Ensures timely submission of information to higher authorities and energy supply organizations established form reporting.
3. Rights.
The chief power engineer has the right:
1. Conduct negotiations on energy supply issues with the energy supply organization represented by Krymenergo OJSC.
2. Participate in meetings to resolve energy supply issues for a given enterprise.
3. Demand from the relevant service (work provider) logistical support for rhythmic and safe work electrical equipment, electrical installations.
4. Apply to management to reward or punish employees.
5. Participate in the work of the commission to investigate accidents, work defects, and accidents.
4. Responsibility.
The chief power engineer is responsible for:
1. Failure to provide correct and safe operation electrical installations.
2. Accidents and defects in the work of the energy service, unsatisfactory and untimely repairs of electrical installations.
3. Selection, training and instruction of workers and subordinate personnel.
4. Providing workers and subordinate personnel with instructions on labor protection and protective equipment in accordance with the standards.
5. Must know.
Ch. The energy engineer should know:
Resolutions, decrees and orders of higher authorities, methodological and regulatory materials on energy services of the enterprise, unified system scheduled preventative maintenance and rational operation of equipment, production capacities, procedures for concluding contracts, labor legislation, rules and regulations of labor protection and fire safety.
6. Qualification requirements.
Higher or secondary technical electrical engineering education,
Minimum 5 years of experience working in electrical installations
Special training on labor protection issues in educational institution with a knowledge test. In the future - once every 3 years.
7. Relationships.
In the work chap. The energy engineer interacts with the director (employer) on electricity supply issues.
Download full text Job description of the chief power engineer of the enterprise in the format WORD
2. Job description of the chief power engineer of the plant
1. General Provisions
Chief power engineer 4 qualification group 2 qualification level belongs to the category of managers
The decision on hiring and dismissal of the chief power engineer of the 4th qualification group, 2nd qualification level is made by the director of the plant.
A person with a higher professional (technical) education and professional experience in engineering, technical and managerial positions in the relevant sector of the enterprise for at least 5 years is appointed to the position of chief power engineer of the 4th qualification group of the 2nd qualification level.
The chief power engineer of the 4th qualification group of the 2nd qualification level reports directly to the director of the plant.
The chief power engineer of the 4th qualification group of the 2nd qualification level in his activities is guided by:
Rules for electrical installations PUE, Moscow, 2004
Rules technical operation electrical installations of consumers, Moscow, 2003
Interindustry rules on labor protection during the operation of electrical installations, Moscow, 2001
Instructions of the Ministry of Energy of Russia for the installation of lightning protection of buildings, structures and industrial communications SO 153-34.21.122-2003.
The chief power engineer of the 4th qualification group of the 2nd qualification level must know:
Labor Code of the Russian Federation;
Federal Law No. 152-FZ “On Personal Data”;
2. Functions
Organization of technically correct operation and timely repair of power equipment;
Uninterrupted supply of electricity to the enterprise;
Rational use of the enterprise’s energy resources;
Ensuring sufficient and rational lighting of workplaces, production premises and territories.
3. Job responsibilities
Conduct training (including on labor protection) for service personnel;
Maintain state secrets;
Take part in the development of an energy saving program;
Strictly comply with the requirements of Ch. accountant for documentation business transactions and provision to accounting necessary documents and information;
Draw up a list of cases;
Maintain personal cards for issuing funds personal protection site workers;
Keep records of the working hours of personnel engaged in work with harmful conditions labor to dispense milk;
Timely submit applications for the purchase of workwear and other personal protective equipment, detergents, milk;
Provide site employees with labor safety briefings upon hiring, quarterly briefings, and targeted labor safety briefings when performing work unusual for them, as well as work increased danger with the obligatory execution of a work permit;
Check the serviceability of tools and protective devices, promptly replace faulty ones, test personal protective equipment;
Take part in the work of commissions appointed by orders of the director;
Comply with current environmental, sanitary and epidemiological standards and rules when handling waste and take measures to ensure the protection environment;
Exercise control at the site over the separate collection of generated waste by type and hazard class, avoiding mixing;
Provide conditions under which waste does not have any impact harmful effects on the state of the environment and human health when industrial waste accumulates in storage areas before its removal;
Maintain reliable records of the presence, generation, use, and disposal of all waste own production and provide a monthly report on the amount of waste generated to the environmental officer for the calculation of waste disposal fees.
At the conclusion of the State contract (agreement) to provide reliable information and proper execution of photocopies constituent documents, received from organizations entering into agreements with the State Plant. contract (agreement).
4. Rights
The chief power engineer of the 4th qualification group of the 2nd qualification level has the right:
- represent the interests of the enterprise in relations with others structural divisions enterprises, other organizations, on issues related to energy services for production;
- receive from the manager and specialists of structural divisions information related to issues of energy maintenance of production;
- stop the operation of power equipment that is in unsatisfactory condition;
- give instructions on issues of energy maintenance of production to managers and specialists of structural divisions;
- conduct correspondence with organizations and structural divisions on issues related to energy maintenance of production.
5. Responsibility
The chief power engineer of the 4th qualification group of the 2nd qualification level is responsible for:
- for failure to perform or improper performance of their duties provided for in these instructions - in accordance with current labor legislation; for offenses committed during the period of its activities, in accordance with current civil, administrative and criminal legislation;
- for causing material damage - in accordance with current legislation;
- for the safety of official documentation.
6. Relationships
The chief power engineer of the 4th qualification group of the 2nd qualification level represents:
- To the parent organization:
- Certificate of energy consumption - quarterly;
- Annual energy consumption statement broken down by quarter;
- Certificate of annual electricity consumption.
To the plant's accounting department:
- Monthly email usage report. energy by workshops and sections of the plant;
- Monthly timesheets.
- Quarterly and annual work plans for the energy sector;
- Annual application and calculations for the purchase of materials, equipment and spare parts.
- Plan vocational training energy department personnel - November;
- Holiday schedule for energy department employees – December
- Certificates of incapacity for work.
7. Procedure for reviewing job descriptions
The instructions are subject to revision as necessary, but not less than once every 5 years.
The job description was developed based on Qualification directory positions of managers, specialists and other employees approved by Resolution of the Ministry of Labor of Russia No. 37 of August 21, 1998.
Compiled by: Chief Engineer.