Modern wallpapering. Successful options for wallpapering. Combining horizontally

05.03.2020

Quotes and phrases about actions and behavior Quotes about bad deeds

Quotes and aphorisms about school and study

Golden Education Quotes and Learning Aphorisms

How to properly and quickly fillet a herring from bones and skin?

When planning to renovate your apartment, it is important to choose the right wallpaper and know how to hang wallpaper beautifully and neatly. This and much more will be discussed today.

How to start?

You should start by choosing wallpaper. Based on your preferences and tastes, you need to determine their design. However, when choosing from the various shades and textures on the market, it is important to remember what style of interior we have chosen. Having previously taken measurements of the room, you need to calculate the required number of rolls based on the fact that on average one roll has dimensions of 0.5 x 1.0 m. When choosing wallpaper, do not forget about choosing an adhesive, which must match a specific type of canvas or be universal.

The process of high-quality wallpapering different shades associated with careful preliminary preparation walls You need to make sure that the walls that you are going to wallpaper are smooth and clean. If there is old coating on the surface of the walls, you will need a basin warm water and skin, as well as strength and patience.

After wetting the walls and waiting about fifteen minutes, remove the wallpaper using a spatula.

Thus, in order to hang wallpaper beautifully, you need to properly prepare the walls of the room by removing and sanding all the rough edges, and if there are various holes, repair them finishing plaster. What kind of wallpaper can be pasted:

The glue must be prepared according to the instructions indicated on its packaging. While the glue is getting ready, you need to measure the correct height of the ceilings and cut the strips to size. However, if you need to adjust the pattern, you must try on each canvas separately and you cannot make blanks. It is better to glue them together, one person standing on the stepladder at the top, the second at the bottom.

Apply glue to the surface of the coating with inside and let soak for 10-15 minutes.

Now you need to carefully attach them to the wall. To beautifully glue rolled sheets, you need to start from the center, stretching them diagonally, applying them with a dry roller or rag. The options for wallpapering are different and much depends on the texture, density of the canvas and the quality of the wall. Yes, sometimes better glue Apply to the walls of the room for better adhesion. Be sure to stick the strips at their joints and cut off the excess at the bottom of the wall after drying.

Options for the living room

An original interior design can be applied by combining two types of wall coverings in a room. Nowadays, wallpapering of two types has become a major fashion trend and is actively used in design projects and realized room interiors. The combination of two types of paintings on the surface of the walls gives a lot of positive effects in the design of the room:

The proportions of the room visually change;
Allows you to hide and eliminate the shortcomings of the room, due to light and dark shades;
Interior design: divided functionally into the necessary zones in the room;
Pasting two types of wallpaper focuses attention on the design of the room or the highlight of the interior.

To learn how to beautifully wallpaper a room, you need to study the combination of colors on the surface of the walls or have good taste in interior design.

The use of two colors in contrasting shades will change the proportions of the room, reduce the height of the walls, and emphasize the idea of decorating the room.

For example, it is reasonable to hang two types of wallpaper in the bedroom, only using pastel shades: one of two colors to highlight the area of the head of the bed or dressing table.

Thanks to wide range manufactured wallpaper, as well as entire product lines of certain textures and shades, determining the way to combine some colors with others is not difficult, as is gluing them. To do this, you need to use the rule for choosing wallpaper for walls from one collection. There are catalogs for wallpapering two types, which makes it even easier to select an interesting combination of wallpaper for the living room walls. What wallpaper will look original:

Place two types in the living room or hall wall covering- a justified decision. After all, the hall is the largest room in the apartment.

When gluing two types of wallpaper in the living room, the following combinations are popular:

Vertical stripes;
Horizontal stripes;
Wallpaper inserts;
Photo wallpaper.

Most often, to paste two types of wallpaper in a room, they use vertical version of wide vertical stripes. This is the easiest and quick way to design two colors. However, in a small living room, vertical wide stripes can reduce the volume of the room.

Combining two colors horizontally is also possible using panels. How to hang wallpaper beautifully and in the classic way which is also called English? This implies the use of two types of coverings in the living room or hall - volumetric and plain. As a rule, vinyl can be used to cover the bottom, and stripes can be used to decorate the top of the room. Also, it's very practical option, because the bottom is more susceptible to contamination.

You can hang two types of wallpaper in the living room beautifully both vertically and horizontally. As a rule, more dark color of two or more in relief, you need to glue it at the bottom of the wall. Light and light colors are applied on top. When using two types of flooring in a room, it is better to buy them from the same collection different colors s decisions and invoices. This will allow you to achieve better harmonization and combination of two colors and wall roll coverings.

It should be noted that when gluing two types of wallpaper, they rarely acquire a large ornament or image, and the use of small textures and patterns is a classic option for combining two colors.

Modern interior design and room decoration styles, such as “Modern” and “Art Deco,” often use neutral, solid colors. This year's trend is mainly White color in design. Styles such as “High-Tech” or “Loft”, on the contrary, prefer dark wallpaper inserts.

As we said above, combine different variants coatings can be different ways and in any style, from classic options to Art Deco. The main thing is that everything is tasteful and in harmony with the furniture and decorative elements in the room.

An interesting way to diversify your interior design is to hang wallpaper with patterns. The texture of patterns can be found different: from classical ornaments to strictly geometric shapes. This type of wallpaper in the living room goes well with plain furniture.

You can beautifully hang two types of wallpaper in the living room combined form. That is, glue one type of wallpaper on the walls, and the second on the ceiling. This is a very labor-intensive option and not so popular, especially in view of the emergence modern technologies as suspended ceilings, however very beautiful. If you want to paste two types of wallpaper in the living room combined style, then it’s better to choose non-woven models. Since this option, being made from cellulose fibers, contains a polymer, which contributes to their strength, durability and texture.

From the living room to other rooms

When moving from the living room to the calmest room in the house, you need to be more strict in the selection of wallpaper shades. In the bedroom color palette should be calm and mostly light shades to induce rest and sleep.

Here you need to find golden mean shades of wallpaper and colors of furniture, which artificial lighting They will relax you, and in the morning with natural light they will invigorate you. According to psychologists, this combination can be achieved by using yellow and brown shades wallpaper

Nowadays a lot of wallpaper is produced, different in color and texture, which can be used as wallpaper inserts in decoration. For example, for children's rooms there are many bright wallpaper with cartoon characters. However, if you buy them to decorate a children’s room, then all this diversity will be overwhelming and will soon get boring. In this case, it is better to put up two types of wallpaper, where the main background will be a single color and the inserts will be bright.

In the kitchen, where there are practically no free walls, some kind of neutral color is used. warm shade. What wallpapers can be arranged and combined in an original way:

Pasting two types of wallpaper is a fairly common way to decorate surfaces in residential premises lately. Using this method you can create a unique designer interior, create an accent, visually increase the height of the walls and expand the space. Before hanging two types of wallpaper, it is recommended to learn about the basic rules for combining them.

Pasting walls with different wallpapers should be carried out strictly according to the rules. To make the combination look as harmonious as possible, you need to take into account a number of factors before starting work.

Ceiling height

It is on this characteristic of the room that the final choice of material, its pattern, texture and shade depends.

Room dimensions

If the room area is large, then you can safely use dark-colored materials and their combinations. Saturated shades are also suitable; they will visually reduce the size of the room, but in spacious rooms this will not be as noticeable as in small ones. You shouldn’t settle for ordinary plain products; it’s better to cover the room with dark materials with large, light patterns. Very often, for covering two types of wallpaper, products without a pattern and materials with images of foliage, bamboo trunks and other plant motifs are used.

Concerning small rooms, then it is impossible to visually reduce the space, therefore dark colors will not fit, it is better to use light-colored products with a small pattern. A small repeating pattern will look great.

It is also important to consider the geometry of the room. If the room is long and narrow, for example a corridor, then it is better to cover the short walls with light-colored wallpaper with a slight overlap at the corner, and the long walls with darker or more colorful ones, if the planned design of the walls allows. This visually smoothes out the difference in surface sizes.

When the entrance to a narrow room is located on one of the long walls, it is perfect next view wallpapering: you need to choose a color for short surfaces, and use several stripes of a more saturated color for the middle of a long wall. The corners of the room should be sealed to match the short walls.

Design option for a narrow room

Material texture

Now let's look at how to combine two types of wallpaper depending on the thickness and texture of the product:

The main rule is to use materials of the same thickness. It is best to choose products made on the same basis. That is, paper with paper, non-woven with non-woven and so on. There are other options for covering walls with different wallpapers, but they require careful selection. As for flowers, then strict rules no, it is recommended to place samples on one surface before purchasing and look at the resulting combination.
Things are more complicated with texture. If you plan to join the strips only in the corners, then you don’t have to worry too much about the difference in thickness or texture. The fact is that in such a place it is quite difficult to notice the transition if it is small. But if you plan to connect products in the middle of the wall, then it is better to either use materials with the same texture and different colors, or cover the joints with baseboards and other products.

Combining products of different textures will require hiding the joints using molding

It is necessary to take into account the features of applying each type of wallpaper. If it was decided to combine paper and non-woven roll materials, it is important to buy special glue for each. Can be purchased universal composition, but for the best effect it is recommended to use different ones.

Technology is also important: in the case of paper wallpaper, glue is applied both to the wall and to the product; non-woven wallpaper does not require processing of the reverse side.

Room lighting

How can you use lighting beautifully? If the room is almost always well lit by the sun, then it is not necessary to artificially darken it by covering all surfaces with dark wallpaper. It is better to stick light-colored products on 3 walls, and the last one, which is opposite the window, with darker ones. As a result, the pasted wallpaper will not look monotonous and will not darken the room too much. This technology also works in reverse side: V dark rooms You can stick a wide strip of light wallpaper on one of the walls and thus lighten the interior a little.

Combination of different types of materials

The modern market offers a huge amount various types wallpaper that can be used in combination with each other. Below are the best compatible wallpaper options:

Paper. This classic variety Perfect for combination with almost any look. They are easy to trim, so using paper models
You can add colored inserts or accents. Vinyl. The perfect combination – ordinary vinyl products with photo wallpapers. They can also be combined with multi-layer paper materials
so that there is one thickness.
Non-woven.
They go well with all types, except textile ones. Liquid. It is best used in conjunction with vinyl or non-woven options. Since liquid wallpaper is a wet material similar to plaster, combination with paper wallpaper is not recommended.

Textile.

It is better not to combine this type of wallpaper. There are a huge number of models for

tissue based

, it’s worth dwelling on a few of them.

Options for combining materials on surfaces

If you have a question about how to beautifully hang two types of wallpaper, it is recommended to pay attention to one of the following options. These methods are considered classic and have been used more than once for interior decoration. Vertical stripes In this case, materials with different patterns are pasted onto the walls alternately. This wallpapering design helps to visually increase the height of the walls. It is important that the glued products have the same texture, since the play of shades will attract attention. In addition, using the same wallpaper, you can beautifully join them without any difference in the seams. where there is no need to increase the height of the walls. To wallpaper walls, you need to divide the surfaces into two parts: first glue the top strip of one color, and then the bottom strip of a different shade. To do this, you can buy products with any texture and ornament. The main thing is that they fit well together.

Horizontal division of walls in the best possible way suitable for rooms with high ceilings

Inserts

The options for gluing the two types of wallpaper with inserts are also different.

This idea is perfect when you want to make an accent in the interior:

First, markings are applied to the wall, taking into account the location of the colored inserts. For ease of pasting, it is better to draw rectangles or squares.
Then you need to prepare the wallpaper itself. Plain material is trimmed so that it does not cover the figures painted on the wall.
The main wallpaper is glued first.
After this, products of other colors are cut out according to the given dimensions and the resulting gaps are sealed with them. If wallpaper with different textures is used, it is necessary to seal the joints with moldings.
This way the entire wall is covered.

There are other ideas for wallpapering using inserts:

A large section of the wall covered with photo wallpaper is the basis of the composition; it is marked and processed first. From it you can already glue ordinary vinyl or non-woven wallpaper, the color of which will match the color scheme of the pattern. For example, if in the center there is an image of a green forest, then the sides should have wallpaper in green or brown tones.
There is also a patchwork technique. Here the products are cut into small fragments of approximately the same shape, after which they are glued to the base according to the applied markings. You can paste the fragments in a certain order or randomly.

Wall decoration using patchwork technique

Other techniques

You can also use one of the following ideas:

Contrast of walls and ceiling. Suitable only if the ceiling height is more than 2.5 m. In this case, it is recommended to make the ceiling darker or lighter than the walls. You can also use a gradient: the bottom of the wall is dark, the top is slightly lighter and the lightest is the ceiling.
Finishing corners. The main area should be covered with light wallpaper, and darker shades should be used in the corners. This technique allows you to visually expand the room, but it can only be used if the design does not require strict rules for color combinations. This option is perfect for rooms with corner furniture
, then the emphasis will be on this part of the wall. If there are any protrusions or niches in the room being treated, you can focus on them. For example, cover the main area with plain dark wallpaper, and the protruding fragments with lighter wallpaper. Or vice versa, but this option is not the most popular.

Highlighting a niche using wallpaper of a different color

Basic rules

To hang two types of wallpaper, strict adherence to certain rules is required:

Color solutions need to be implemented not only in wallpaper combinations, but also in furniture, curtains, various subjects and accessories. This way the interior will look more harmonious.
The combination of plain materials and products with ornaments is considered one of the most successful.
It is not recommended to use combinations of variegated tones. It is better that one stripe is bright, and the second is a more muted shade.
If there is a floral pattern on the base material, then great solution will be a combination with wallpaper, the texture of which is made in the same style.
Products with geometric shapes It is recommended to combine with abstraction.
When using materials with different textures, it is necessary to mask the joints using moldings, slats, tapes and borders.
Triple combination is possible only in the case of large rooms; in small rooms the interior will look too bulky.
Both glue and wallpaper need to be bought in the same store, it is better if they are from the same manufacturer.
Preliminary marking is required.
It is recommended to start pasting from the top.
When applying products, it is important to leave a reserve in case they move away after drying.

A combination of two types of wallpaper with different patterns, textures and color solutions allows you to create truly original interior. It’s just important not to rush and first check how good this or that combination will look on the walls.

WALLPAPER COMBINATION

Combined wallpaper

We all want our home to be comfortable and pleasant to live in. When renovating an apartment, you want to create your own, special interior.

How can you create your own unique interior for your apartment in an original and inexpensive way? Using methods of combining wallpaper can help us with this.

Combined wallpaper allows you to zone a room, highlighting, for example, dining area. This is useful in children's rooms, living-dining-kitchens and studio apartments.

Secondly, covering walls with combined wallpaper may cost you less, since many stores are selling leftover wallpaper at discounted prices.

But, of course, you need to choose the wallpaper for the combination thoughtfully so that it turns out beautifully. This is what we will talk about today.

It is very important to understand that combined wallpaper is an exact statement of basic colors premises. If the room is covered with one type of wallpaper in a neutral color, then the room can be filled with almost any furniture, textiles and accessories.

But if a combination with wallpaper of a different color appears in such a room, then this color must be duplicated in the interior.

So, the first and main rule is the color of the wallpaper used for the combination must be duplicated in the interior

When the color palette combined wallpaper repeated in the interior, a very harmonious, balanced interior appears.

Combining wallpaper: six ways for modern design

Method one: vertical stripes.

Vertical stripes on the wallpaper visually raise the ceiling.

In a modern interpretation, one wall can have striped wallpaper, while the rest can be plain-colored or with a dim, barely noticeable pattern.

But this is not always the case. You can distribute vertical stripes on different walls. Moreover, they can be regular - repeated at regular intervals. As you can see in the photo, the interval is different walls may be different.

The stripes can be different - in color or pattern. The texture of this combination of wallpaper should be the same, otherwise you will get an incomprehensible jumble. For such a combination, it is easiest to work with one collection. The fact is that most campaigns release several designs that combine with each other. As a rule, they are available in several colors. One collection has two or three plain backgrounds and several options with patterns.

When combining vertically, there is another interesting technique that allows you to make the ceiling higher. One of the stripes “extends” to the ceiling. At the same time, the transition boundary is blurred, which gives a feeling of greater volume.

To make the principle of the stripes a little clearer, we present several options in graphic representation. The drawings are made as if viewed from above.

Waysecond: dividing walls into horizons.

Waythird: wallpaper inserts.

Wayfourth: wallpaper inserts on large areas.

Wayfifth: combining with flaps.

Waysixth: highlighting various niches and protrusions.

Some general tips for the correct combination of wallpaper.

When you decide to do a combined decoration of a room, try to buy all the wallpaper in one place. If, nevertheless, half of the purchase needs to be made in another store, be sure to take samples of the purchased wallpaper with you, so that you can later attach them to other rolls. This will allow you to choose matching colors and textures without relying on chance. After all, even the slightest deviation of the color from the one you need can ruin the overall picture.

Try to use wallpaper of the same width. This will avoid many problems associated with gluing them to the wall or selecting the desired edging. It is most convenient to work with one type of material produced by one manufacturer.

Combining wallpaper will allow you to smooth out many of the shortcomings of the room: correct the height of the walls that are too large or too small, highlight and decorate niches or protrusions, and balance the overall illumination of the space. By achieving various visual effects, you can give the room a completely different look, making your home more comfortable, cozy and modern.

Wallpapering is considered the most simple option decisions in case of room design. The most important thing is that it is fast and beautiful. Besides modern wallpaper enough for five years, or even more. Moreover, on construction market wallpaper you can find quite complex developments of this finishing material. They are found as simple paper wallpaper, as well as more complex options, such as silk-screen printing or vinyl wallpapers, For example. You can even hang washable wallpaper and then many problems can be solved.

It would seem that you can come up with something else: take wallpaper glue, especially since there is a very wide choice of both color scheme, both in pattern and texture. No, they made it up. Besides the fact that they started wallpapering different colors on different walls, they also began to glue two types of wallpaper on each wall, differing in both color and texture. This is the so-called combined wallpapering, which belongs to the latest trend in interior design. This approach allows you to significantly diversify the design of the premises by highlighting some part or some objects separately. In this regard, gluing wallpaper of two types is increasingly relevant: nowadays it is fashionable, since decorating a room turns into a very interesting process.

The options for wallpapering walls in various combinations are almost limitless.

Any technology for decorating premises depends on certain rules. The same applies to wallpapering, especially when combined finishing walls If the wallpaper is chosen correctly, the end result will definitely be harmonious and attractive. In any case, there will be an opportunity to surprise your loved ones and friends.

How ceiling height affects the choice of wallpaper

The height of the ceilings must be taken into account when choosing the pattern and type of wallpaper. If the ceiling height is below 2.5 meters, it is better to opt for wallpaper light colors, without rough texture and large patterns. For very low ceilings, wallpaper with light primary tones with a faint pattern or texture, as well as with vertically arranged patterns or stripes, will look harmonious. They can be placed on one wall, or on two or even three, which will visually raise the height of the ceilings.

Vertical stripes visually raise the ceilings.

The presence of high ceilings, from 3 meters and above, requires a completely different approach. Wallpaper with a large pattern stretched across the width will look great here. Alternatively, a very harmonious result can be obtained by dividing the walls horizontally, when different patterns are located not vertically, but horizontally: in the upper and lower half of the walls, or rather not half, but one third. Availability various models wallpaper allows you to choose exactly those wallpapers that will look modern and harmonious.

How does the size of the room affect

When choosing wallpaper, you need to take into account the width and length of the room, including geometry, if the room is not standard, which is very rare. Basically, there are rooms that do not have large dimensions, but if it is a large room, then you should opt for dark shades and rich tones. This approach allows you to visually reduce the size of the room. As a rule, wallpaper in dark shades with a large but light pattern, on the theme of nature, abstraction or geometry, looks harmonious.

Horizontal stripes expand the room visually.

In small rooms, everything is quite the opposite: you have to use light colors, with fine texture and small patterns that do not stand out very much. Here you should also take into account the geometry of the room: if it is long and narrow, then it must be visually aligned. To do this, light wallpaper is glued to shorter walls, and so that they match the longer ones. This will visually align the room.

The far wall seems to be closer due to the fact that the wallpaper goes behind the wall.

In order to somehow, at least visually, correct the geometry of the living room, they resort to various options. For example, if the entrance to a narrow room is located on the side of a long wall, then the opposite wall, with the center in the middle, stands out. At the same time, those wallpapers that are intended for narrow walls. This approach will allow you to visually expand the room on one narrow side, and narrow it on the wider side.

Selection of texture

If you are gluing wallpaper of two colors, it is better to choose wallpaper that has the same texture, but a different color and pattern. If the joining is carried out strictly in the corners, then this is not very important, but if the wallpaper has to be joined directly on the wall, then the differences in texture will be very noticeable. Therefore, this approach is not suitable if you need high quality work performed.

When using explicit structures, it is desirable that they be of the same type.

The selection of glue also plays an important role, especially when choosing different types of wallpaper. In any case, in a store that sells wallpaper you can also buy glue. For different types of wallpaper, different types of adhesives are used. But, in order not to worry too much, it is better to use universal glue. It is suitable for all types of wallpaper, which can ensure the proper quality of work, regardless of the type of wallpaper.

Light and dark room

If the room is too light, then it is not necessary to cover all the walls with dark wallpaper. It is enough to cover the wall opposite the window with dark wallpaper, and leave everything else light. Then this feeling of oppressive atmosphere that they emit will disappear dark wallpaper, present on all walls.

A dark wall opposite the window creates a shading effect for the entire room.

Sometimes they do the opposite and glue light-colored wallpaper to the wall located opposite the window if they want to make the room brighter. IN in this case it all depends on the location of the room relative to the cardinal points. The more sun rays gets into the room, the brighter the room.

Wallpaper layout techniques

There are a huge variety of options for gluing wallpaper of two types. The main thing here depends on the presentation of the future “picture” that you want to see in your room.

Combining vertically

As a rule, the presence of vertical stripes seems to raise the ceiling visually, but this does not mean that stripes should be present on all walls. Modern design allows stripes to be present on only one wall, and wallpaper with a barely noticeable pattern or texture is glued to all other walls.

If the ornament is placed vertically, it creates the illusion of high ceilings.

Many people glue wallpaper with a vertical pattern, distributing it evenly over all walls. From the photo you can see that the spacing may be different on different walls.

A variant of wallpapering, with alternating vertical stripes.

The stripes may not be the same, both in width and pattern, and in color. In this case, the texture of the selected wallpaper should not differ, otherwise it will not work harmonious combination. As a rule, in such cases, they buy wallpaper from the same collection. This is all due to the fact that some companies produce wallpaper with several patterns that are combined with each other, but at the same time differ in color. From one collection you can choose 2-3 tones that have the same type of patterns. As a rule, this is enough to decorate your home in a modern style.

The second variant of the color scheme of the same collection.

In the photo below you can see the use of three types of wallpaper from one collection. Here you can see that the combination is simply perfect. This indicates that the wallpaper has been tested before it goes on sale. In some other photographs, the wallpapers were selected from the same collection. This approach simplifies the selection of wallpapers with different textures.

Three types of wallpaper.

To make the ceiling appear higher, there is another way to wallpaper. He suggests that one of the stripes ends up on the ceiling, blurring the border of the transition, which is why a similar illusion is obtained.

The stripe on the ceiling shifts the boundaries.

To better understand how the placement of stripes affects the visual picture of changes in the geometry of the room, you should look at the pictures. The drawings correspond to the top view.

Options for gluing two types of wallpaper.

These are absolutely working options that will never let you down and will always look very harmonious. Similar options have been tested dozens of times, and each time the result met all expectations. Naturally, there are many more options. Although everyone will be able to offer their own version, moving away from the standards.

Combining horizontally

Horizontal division is also not a bad option, one of the design classics. It has been used for a long time, but with the advent wide choice colors and textures, this approach has received a completely new impetus in application. This design solution Suitable for rooms with a small area but high ceilings. As a result, it is possible to get rid of the “well” feeling. Only one horizontal stripe can help with this. It can be located at the height of the window sills, although its location classically corresponds to 1/3 of the height of the walls, so it can be located either at the bottom or at the top. Dividing in half is not considered successful.

The presence of a horizontal stripe.

Very often the classic is broken and the strip is placed at eye height. At the same height, various decorative elements. Sometimes it looks really good. Sometimes corridors and hallways are decorated in this way.

Sometimes it is simply necessary to visually reduce the height of the ceilings.

The division zone may be at the top. In this case, the lower area is dark, and the upper is light, and sometimes vice versa, as evidenced by the lower photo.

Very interesting way wallpapering.

As a rule, options for combining wallpaper of other types when combined horizontally have the following formula:

The bottom 1/3 is striped wallpaper, and the top is wallpaper with a small pattern.
The bottom 1/3 is a small pattern, and the top plain wallpaper or large monograms.
Bottom 2/3 is wallpaper with a large pattern, and the top is plain.

One of the options for horizontal division (classic).

Division into zones

If you use several types of wallpaper, you can highlight certain zones, depending on the functionality. As an option, these are studio apartments, where the option of separating zones, such as a dining room or a recreation area, simply suggests itself, without forgetting the area where food is prepared.

The recreation area is highlighted especially brightly.

A similar approach can also be applied in children’s rooms, where it makes sense to highlight play area, sleeping area or table area. This approach is also relevant if two children live in the nursery. Naturally, it is necessary to take into account the wishes of children if they are old enough.

Selection of zones in the children's room.

This option allows the use of wallpaper of various textures. However, molding should not be used for separation. It is advisable to join the wallpaper in the corners, otherwise the joints will not look very attractive.

Panels or decorative inserts

The fashion of hanging different wallpapers in one room has existed since ancient times. But in the past, wallpapers were made of fabrics, so they were framed, in the form of panels. Only rich people could afford such a pleasure, since the wallpaper cost big money. This approach to wallpapering has survived to this day. This design is considered classic. The material for forming panels can be silk-screen inserts, as well as embossed or textured, expensive wallpaper.

Classic: decorating a living space in panel style.

To support this style, it is possible to frame wallpaper of a different color or texture in a frame made of molding. As a rule, this option is also suitable for other styles, such as Provence or country.

The Art Nouveau style, which is considered more modern, also allows for a panel form, but with a more different approach to the design of the frame.

Modern interior: a panel of wallpaper of a different color.

Another interesting option is pasting niches. In this case, wallpaper for niches may have a completely different texture, depending on the style used.

Interesting option– pasting a niche with wallpaper of a different texture and color.

And yet, in any case, you should adhere to one rule: it is advisable to use wallpaper from the same collection, this is the only way to get excellent result. You can choose the wallpaper yourself, but it’s better to turn to a professional.

Arrangement of color accents

There are several approaches to color highlighting certain elements. The first approach involves diverting attention from some element that looks inharmonious or stands out unpleasantly. You can take uneven walls as an example. This is especially true in old apartments, where surfaces may be sloping. To prevent these irregularities from being noticeable, wallpaper of a different, very attractive color and pattern, and possibly very bright, is glued to the wall opposite.

Placement of accent: covering the walls with wallpaper of different colors.

The second option works the other way around: wallpapering is associated with highlighting an object or drawing attention to it. Here it all depends on what particular item is supposed to be highlighted: if it’s a bedroom, then most likely the bed will be highlighted, and if it’s a kitchen, then it’s probably worth highlighting the dining room with a table or, in other words, a dining area. This option can be compared to zoning, although, in this case, attention is diverted from the kitchen area.

Focusing attention around an object great way wallpapering of two types. In this case, the emphasis can be placed not necessarily vertically, but also horizontally, although the first approach is much more common. This is due to the fact that in our premises the ceilings are low, which is mainly why we have to resort to suitable options. If there are high ceilings, the accent can be placed horizontally, in the form wide stripes, as seen in the photo below.

One of the latest trends in interior design is the use of different colors on the walls. This technique allows you to diversify the design and focus attention on some part of the room. To correct planning deficiencies, different patterns in the same color scheme are used. All these techniques work ideally with wallpaper: they have different textures, colors, patterns. Moreover, the result can be assessed in advance by rolling out two rolls side by side on the wall. That is why wallpapering of two types is increasingly popular: it is modern and gives the opportunity to make rooms interesting.

Rules for combining wallpaper and textures

In such a matter as design, one cannot do without rules, and even more so when combining colors, patterns and textures. In order for wallpapering of two types to look harmonious, it is necessary to take into account whole line parameters.

Ceiling height

It is this characteristic of the room that dictates the choice of the type of pattern, and also largely determines the texture and color. If the ceiling height is less than 2.5 m, use wallpaper in light colors, without a rough texture, with a small pattern. If the ceilings are very low, a combination of a light main background with a dim pronounced texture or a pattern, vertical stripes (a pattern, or simply canvases of a different color) that can be located on one wall, but it is better to distribute them over two, or even three.

Vertical stripes “raise” the ceiling

High ceilings - from 3 m and above - require a radically different approach. Here, on the contrary, a large drawing, stretched in width, is needed. You can use horizontal wall divisions using different colors in the top and bottom halves (see more below). To make this design look modern - this is still a classic technique - you need to put a lot of effort into choosing colors and/or patterns.

Room dimensions

In addition to height and width, we pay attention to geometry. First, to the square. If the room is large, you can use more saturated or darker shades. This will visually reduce the dimensions. If plain dark walls If you are not happy, find dark-colored wallpaper with a light, large pattern. As a rule, these are plant motifs, abstraction or geometry are also found.

In small rooms, everything is definitely the opposite: use light colors. If it has a texture, then it is not large; the pattern is small, not very clearly expressed.

Secondly, we pay attention not to geometry. If the room is long and narrow. In this case, the situation will be saved by gluing two types of wallpaper: lighter ones are glued to short walls, and some of them “go around” the corner. This way the geometry is visually aligned.

There is also a technique that is used if the entrance to a narrow room is on one of the long sides. Then it’s worth highlighting the middle of the opposite wall with a different color, pasting the corners with the same wallpaper that is intended for short ones. The perception of the room will change significantly: it will no longer seem so long.

Selecting a texture

In general, gluing two types of wallpaper requires careful selection of the texture and thickness of the canvas. When combining, it is advisable to use the same type of panels. If the joining occurs only in the corners, then the thickness and texture can be special attention Don't worry: you still won't see much in a place like this. But if the connection of the canvases is flat wall, then the difference in thickness will only emphasize the transition. It usually looks too exaggerated.

One more moment. If you still decide to glue the canvases different types, you need to use the appropriate glue for them. For example, for wallpaper on a non-woven basis, you have your own - on paper - your own. The same applies to the coating - for vinyl and structured canvases there is a different type, for acrylic - another. Don't want to fool your head? Buy a universal one. There are such compositions.

Light or dark

If the room is too light, or the interior is too monotonous, it is not necessary to use dark wallpaper on all walls. You can cover the wall opposite the window dark, let the rest be light. As a result, the room will not be very bright, and you will get rid of the oppressive atmosphere that dark walls create.

This technique works the other way around: to brighten a room, just hang canvases light color on the wall opposite the window. It will become much lighter.

How to compose

There are several techniques for gluing two types of wallpaper, which can be used “in their pure” form or combined two or three at a time. It is important to have a good idea of what exactly you want to achieve.

Vertical combination

Probably everyone knows that vertical stripes give visual increase ceiling height. Moreover, the stripes do not have to be regular. In a modern interpretation, one wall can have striped wallpaper, while the rest can be plain-colored or with a dim, barely noticeable pattern.

You can see an example of using three wallpapers from one collection in the photos below and above. The combination is almost perfect - they were tested for compatibility many times before starting production. By the way, in most of the other photographs, wallpapers are also combined from the same collection. It’s just that it’s very difficult to combine different textures normally.

To make the principle of the stripes a little clearer, we present several options in a graphical representation. The drawings are made as if viewed from above.

These are win-win options that will always “play” when choosing paintings from one collection. If you need a guarantee that wallpapering two types will be effective, use one of these schemes. This wall design has been tested thousands of times, and every time the result is excellent.

Horizontal division

A technique that can be considered a design classic. It has been used for a long time, but with the current abundance of colors and textures it has acquired a completely new meaning. This technique is more often used in rooms with small area, but with high ceilings. Horizontal division of the room helps to remove the “well” effect. It could just be a horizontal strip that encircles the room. It is often tied to the height of the window sills, but in general it is carried out when dividing the plane into three parts and can be located in the lower or upper third.

This rule is often violated: sometimes the strip is made at eye level and some decorative elements are hung at this level. It often looks very good. This technique is often found when

The division zone can also extend at the top. Traditionally Bottom part is decorated in darker colors, the top one is lighter. But this rule is also broken. An example is in the photo below.

Traditional options for combining two types of companion wallpaper with horizontal division:

bottom (1/3) - striped wallpaper. top - smoothly painted or with a small pattern;
bottom - 1/3 - in a small pattern, top - large monograms or plain ones;
2/3 at the bottom is a large pattern - monochromatic at the top.

Traditional pasting with horizontal division is one of the options

Zoning

Wallpaper of different colors in one room is also used if it is necessary to emphasize zoning. For example, in studio apartments, different functional areas: dining and recreation.

The same principle can be applied in a nursery. In this case, gluing two types of wallpaper serves to separate the play area, bed, and table. The same applies if there are two children in the nursery. This is only possible if there is no competition between them, otherwise the number conflict situations may increase.

With this combination it is possible to use different textures. But separating them with moldings is used very rarely. They try to either join in the corners, or choose wallpaper so that the joint does not look provocative.

Panel or decorative insert

Different wallpapers have been glued in one room for a long time, only once they were made of fabric, and they were decorated in “frames” because they were very expensive and were accessible only to the upper class. Since those times, it has become a custom: gluing two types of wallpaper in the form of a panel. And today they design it this way classic interiors, using silk-screen printing, embossed or textured options for insertion.

If the style allows, elements of a different color are framed from. This design option fits perfectly into classic interiors or Provence and country styles.

A similar panel is possible in more modern styles- modern, for example. But then the frame can be made from a border of the same color - from the same collection, or cut from the “body” of wallpaper.

Another option is to paste it into a niche. In this case, the design and texture are selected according to the style, as well as other designs.

And in this case, it is best to use wallpaper from the same collection. A professional decorator will select them based on experience or using instinct, but amateurs may not succeed. If you don't want to take risks, use one collection.

Color accents

There are two principles for using this technique. The first is to divert attention from some element that you consider unsightly. For example, uneven walls. In some apartments they may be sloping. To prevent the eye from clinging to this fact, the opposite wall is highlighted with wallpaper of a different color, with or without a pattern. It is important that they attract attention.

The second technique is gluing two types of wallpaper to attract attention to some object in the interior. In bedrooms this is often either the bed or the opposite wall. Here who wants to emphasize something (). In kitchens, a table is often allocated, thus forming a dining area. This is partly zoning, partly accent. Still, attention is diverted from the kitchen area.

Accenting a wall near a piece of furniture is an interesting way to hang wallpaper in two colors

The actual accent can be not only a vertically directed strip, although this option is more common: our rooms do not have high ceilings, so any means are good. In a tall room, the accent can be a wide horizontal stripe - or some part of the wall, as in the photo below.

Two steps at once: and different colors, and different textures

Some rooms have ledges load-bearing walls or niches. Often they try to disguise them. There is absolutely no need to do this. By highlighting this area with wallpaper of a different color, it can be turned into an architectural highlight that will add individuality to the room.

Wallpapering two types: protruding “remnants” of load-bearing walls can be turned into an asset

In general, the options for hanging wallpaper of different colors in one room are endless. Choose what you like best, and so that it is more ideas, below there is a whole section with different photos.