Calculation of hot water taking into account heating of cold water. What is cold water for hot water in the receipt
Read also
By order of the Committee on Tariffs and Prices of the Moscow Region dated December 13, 2014 No. 149-R “On setting tariffs for hot water for 2015,” a two-component tariff for hot water was approved on the basis of Resolution of the Russian Federation dated May 13, 2013 No. 406 “On government regulation tariffs in the field of water supply and sanitation." The procedure for calculating and making payments for public utilities defined in the Rules for the Provision of Public Utilities, approved by Government Decree Russian Federation No. 354. Accordingly, the calculation procedure for payment for hot water has been changed. Now the fee is for 1 cubic meter hot water consists of two components:
First- fee for 1 cubic meter of cold water.
Second- payment for thermal energy, which was spent on heating 1 cubic meter of cold water.
Component on cold water- this is the volume of cold water (CW) for hot water supply needs. If there are individual metering devices (meters), this component is determined - according to the readings of the hot water meter (DHW), in the absence individual device accounting - according to the standard, i.e. 3.5 cubic meters per 1 person. per month.
From January 1, 2015, residents apartment buildings in the city of Lyubertsy, which are equipped with communal metering devices, charges for hot water are made according to a two-component tariff: the cold water component for DHW and the thermal energy component for DHW.
Payment for hot water for residents of the house must also be made according to a two-part tariff. The house is equipped with common house hot water metering devices. Payment for hot water from 07/01/2015 must be calculated according to the current two-component tariff: the cold water component for DHW (at a tariff of 33.28 rubles / cubic meter) and the thermal energy (TE) component for DHW at a tariff of 2141.46 rubles ./Gcal.
In receipts for payment for housing and communal services from July 1, 2015, “Hot water supply” is indicated in two lines:
Cold water supply for hot water supply - the volume of cold water (cold water supply) for hot water supply needs;
TE for hot water supply - thermal energy spent on heating 1 cubic meter of cold water.
The readings of a common house meter - the amount of hot water for the current month and the amount of thermal energy consumed in the current month for circulation and heating of the specified amount of water are shown on back side receipts, for example, are as follows:
1089.079 cu.m. m. - PV for hot water supply (physical water for hot water supply);
110.732 Gcal. - TE for hot water supply (thermal energy for hot water supply).
The actual amount of thermal energy that is spent on heating 1 cubic meter of cold water for a home is determined based on the total volume of thermal energy to the total volume of hot water for the current month, which is:
= TE for DHW / PV for DHW = 110.732 Gcal. / 1089.079 cu.m. m. = 0.1017 Gcal/cub.m
then, the actual cost of thermal energy spent on heating 1 cubic meter of water in the current month will be:
0.1017 Gcal/cub.m x 2141.46 rub. for 1 Gcal. = 217.79 rub.
Please note that the amount of thermal energy spent on heating 1 cubic meter of cold water in each billing month may differ, because is a calculated value and depends on the amount (volume) of hot water consumed by the house in the current month and the amount of thermal energy spent on circulating and heating this volume. Every month, these readings are taken from the common house heat energy meter and transmitted to heat supply organization and are simultaneously recorded on the back of the receipt for each current month.
How the cost of Gcal of heat and cubic meters of hot water is calculated using a meter. In the previous article, we calculated the cost of Gcal of heat for a house that does not have centralized hot water. Now let's try to figure out how correctly calculate the cost of a cube of hot water and charge for hot water according to the heat meter.
Installation of hot water supply systems in residential multi-storey buildings.
First, let's determine how your hot water system works.
Hot water systems there are open and closed type. As the name of the hot water system suggests open type This is a method of producing hot water in which you simply draw hot water from the heating system.
An open type hot water supply system is used mainly in big cities when heat is received from CHP - thermal power plants.
At a thermal power plant, water is converted into steam, the steam turns a turbine, turning kinetic energy steam into electricity, condenses again turning into water and it is this water that is used for heating. Respectively water and heat in water for thermal power plants, it is a by-product, or, more simply, waste.
Theoretically, we don’t mind it; with the help of additional pumps it is supplied to our homes, and that’s the only reason hot water extraction allowed of such heating systems. Here, by the way, is one of the answers why in major cities heat is cheaper than in small ones. But let's return to the topic of our article.
How the cost of a cube of hot water is calculated using a heat meter.
Here, as an example, we take the KM-5 heat meter, although this heat metering scheme for heating hot water can be implemented on any of the manufactured heat meters - heat meter VKT7, produced by NPF Teplocom, heat meter TSRV ZAO Vzlet, heat meter SPT 961 ZAO NPF Logika, heat meter ESKO-T of ZAO Energy Service Company 3E, heat meter TMK-N NPO Prompribor, Kaluga, heat meter MKTS LLC Intelpribor and others.
In this hot water metering scheme, the flow meter (water meter) G3 takes into account amount of water used for tapping , the hot water temperature is taken from the supply pipe. The cold water temperature is programmable. Amount of heat to calculate the cost of a cube of hot water consumed residential building, calculated like this:
— G3 x t1-tx/1000 = Q Gcal.
Here and below we neglect the water pressure in the heating and hot water supply system; it does not greatly affect the final result, in heat meters, to reduce installation costs and state verification of water pressure usually programmed.
In theory hot water consumption G3 m3 from heat meter should be equal to the total amount of hot water consumed by residents apartment counters hot water - water meters.
But very often they steal water from us by covering water meters with huge magnets, taking water through purification filters installed before the water meters, and in other ways. There have always been enough craftsmen in Rus'. How to deal with them and about in various ways You can read about water theft here.
Further amount of heat received, spent on heating hot water Q Gcal, multiply by the cost of 1 Gcal of heat and divide by total quantity water supplied by residents. We get the cost of a cube of hot water. In the same systems ( we're talking about about an open-type hot water supply system) there may be a slightly different way of accounting for heat and the amount of hot water consumed by residents of a residential building. Although the method for calculating the cost of a cube of hot water remains unchanged.
Here, the amount of hot water is calculated as the difference between the water flow rates in the supply and return pipelines of the heating system G1 and G2. In this case, the formula for calculating the cost of a cube of hot water takes on a slightly different form.
(G1- G2) x t3-tx/1000 = Q Gcal.
We will not criticize heat meter manufacturers, although we think the second method is more accurate, since here hot water temperature is measured more accurately. In any case, the HOA or management company pays the heat supplier for the total heat consumed.
HOA or management company It divides the heat into heating and hot water itself. and calculates the cost of a cube of hot water. Here it will only be violated, the one who consumed less hot water may pay a little more for it - than the wasteful neighbor.
Having received a receipt for paying for a utility bill, many Russians look at it with bewilderment, trying to understand what is encrypted in the mysterious abbreviations, and for what services they need to shell out quite a lot of money.
Unfortunately, until now utility companies have not bothered to bring to a unified standard the receipts issued in different regions Russia. The content of these payment documents lies entirely within the imagination and administrative delight of local authorities.
Do housing and communal services have the right to come up with names for their services?
The list of services that must be paid for by residents of apartment buildings is clearly defined by Article 154 of the main industry document - the Housing Code. Homeowners and tenants are required to pay for housing maintenance and repairs. In addition, their responsibility includes payment for services:
— cold water supply (CWS), i.e. supplying cold water through the water supply to the tenant’s apartment;
— hot water supply (DHW), which consists of payment for water supply and heating;
- water disposal, i.e. ensuring the operation of the sewer collector, removing wastewater;
— gas supply;
It is unacceptable to change the names of these services, although some regional housing and communal services arbitrarily enter lines such as “ DHW heating", "DHW make-up" or " DHW drainage and HVS". It is not at all necessary for the consumer to know how much it costs to heat water; it is important for him final amount which is presented for payment. 
Of course, in the case when a resident of a house wants to know about each utility service, the housing and communal services are obliged to provide him with all the information about what costs make up a particular utility tariff.
What abbreviations can be found on receipts?
Since utility services are in no hurry to bring payments to unified standard, it will not hurt payers to navigate the abbreviations that can encrypt certain components of utility payments.
— HVS DPU– this is cold water supply (payment for cold water supply) according to the house meter, i.e. in accordance with the readings of the common house meter (if your house has one). If the meter is installed in your apartment, the receipt may indicate HVS KPU (apartment device accounting).
— DHW DPU- accordingly, hot water supply, calculated according to the house meter.
— Drainage– sewerage services, which are called sewerage in bills.
— Cold water for domestic hot water- this is how the intricate concept of cold water supply for hot water supply is denoted. According to the employees utility service, you must separately pay for the supply of cold water for heating, and on another line - the cost of heating this cold water. The cost of hot water is the sum of these lines
— Heating basic pl.– this is how heating the main area of your apartment is usually designated, i.e. the minimum that is due to residents registered in the apartment.
— Heating izl. pl.– this is the cost of heating the excess space of your apartment. It usually costs more than heating the minimum square meters you are entitled to.
— Opl. lived- This is payment for housing.
— Contents and rem.– means paying for the maintenance and repairs of your apartment. This includes service utility networks inside your home, them Maintenance, repair technical devices and residential building structures, as well as many other costs.
— Lived izl. pl.– payment for housing based on excess space.
Now it will be easier for you to understand the contents of your utility bill. A separate topic is the formation of tariffs for which payments are calculated. 
The most impressive frauds related to unjustified charging of payments are committed here. As a rule, only a specialist with experience in utility networks, can assess how justified each figure in the utility tariff is.
Having received the final printout of the heat meter readings, an inquisitive person naturally begins to analyze it. After all, the desire to save is natural under today's living conditions. The first question that concerns residents is how many Gcal are in 1 cubic meter of hot water. If we are talking about this, the question is legitimate - you got to pay. Everything is quite simple here. 1 Gcal is just that the amount of heat required to heat 1000 m3 (correctly 1000 tons) of water by 1 degree. Therefore, 1/1000=0.001 or 1 cubic meter of hot water is 0.001 Gcal. To this value, when calculating for hot water, general house losses are added.
You can read what heat losses are, in short - general house losses are caused by the fact that while the water reaches your apartment, it will inevitably cool down a little along the way, but since heating network- pipes through which water is coming belong to everyone, everyone together for these losses and pay. It is especially strong in those houses where it circulates in order to keep it cool on bathroom heated towel rails. Heat losses here reach 35%, but in fact they are spent on heating bathrooms and it would be more correct to attribute them to heating. But this is unknown, he only counts what has passed through him.
Why heat bathrooms in the summer, we can only discuss with you; we will not change SNiPs, much less the existing pipe layout. Towel dryers cannot be thrown away, otherwise the circulation of water will stop in all apartments above and below you, and at the same time, in order for hot water to come out of the tap, it will have to drain for a long time, you will lose even more on the cost of water, having gained practically nothing on heat - it will go away with warm water until you get to the hot one.
Now let's move on to the cost of 1 cubic meter of hot water for heating. With the amount of heat that hot water carries naturally, nothing changes here. But the method of comparison or calculation that many people use is not correct. What is the mistake when calculating the cost of 1 cubic meter of hot water Let's look at the amount spent on heating using an example.
Analysis of the printout and answer to the question - how many Gcal are in 1 cubic meter of hot water?
Let's try to analyze through the eyes of the consumer. As an ordinary consumer thinks: the data from the Qo column is divided by the data from the V1 column, i.e. Gcal per cubic meter, the result is a certain value, for example, for us 0.00209. These data are compared with neighbors - who has it cheaper?? Those who make such calculations are especially negative. Their data is off the charts. Although the result is less heat, does that mean they are being deceived? They started paying more per cubic meter of water! Why did you spend money, part of the savings was stolen!
And the answer to their question is very simple. Let's go back a little. exactly the amount of heat that is needed to heat 1000 m3 (correctly 1000 tons) of water by 1 degree. It was not in vain that I marked “tons”, water at different temperatures(enthalpy) and pressure has different densities, when heated it expands and there is more of it after it has gone around your apartments and cooled down, the volume of water decreased due to cooling, but in tons it will be the same. On the printout, if you look at columns M1 and M2, this is clearly visible. Some of the difference here is caused by the error of the instruments; in accordance with the heat metering rules, the error can reach 2% on one flow meter. Also, a small error is caused by the fact that the pressure at metering units in houses consuming less than 0.5 Gcal per hour of heat may not be measured, but programmed according to the actual pressure in the ITP, since pressure affects the overall metering only slightly, by approximately 0.1% of the overall accuracy of thermal energy measurement. AND main mistake- degrees or in these calculations the temperature difference between the supply and return pipelines, the dt column (circled in blue) which was completely forgotten.
In the near future, residents will begin to pay for hot water according to a new principle: separately for the water itself and separately for heating it.
So far, enterprises and organizations are already using the new rules, but for residents the old accounting remains. Due to communal confusion, housing services companies are refusing to pay heat energy companies. Fontanka understood the complexities of the two-part tariff.
Earlier
Until 2014, the population and businesses paid for hot water as follows. For the calculation it was necessary to know only the consumed number of cubic meters. It was multiplied by the tariff and by the figure artificially derived by officials - 0.06 Gcal. This is exactly the amount of thermal energy, according to their calculations, that is needed to heat one cubic meter of water. As Deputy Chairman of the Tariff Committee Irina Bugoslavskaya told Fontanka, the indicator “0.06 Gcal” was derived based on the following data: the temperature of the hot water provided should be 60 - 75 degrees, the temperature of the cold water used to prepare hot water should be 15 degrees in winter, 5 degrees in summer. According to Bugoslavskaya, committee officials made several thousand measurements, taking information from metering devices - the artificially derived figure was confirmed.
In connection with the use of this payment method, a problem arose with risers and heated towel rails connected to the hot water supply system. They heat the air, that is, they consume Gcal. From October to April this thermal energy is added to heating; in the summer this cannot be done. For a year now, a system has been in place in St. Petersburg according to which payments for heat supply can be charged only during the heating season. As a result, unaccounted heat is generated.
Solution
In May 2013, federal officials came up with a way out of the situation of unaccounted for heating with heated towel rails and risers. For this purpose, it was decided to introduce a two-component tariff. Its essence lies in separate payment for cold water and its heating - thermal energy.
There are two types of heating systems. One implies that the hot water pipe comes from the one intended for heating, the other implies that for hot water, water is taken from the cold water supply system and heated.
If hot water is taken from the same pipe as heating, then payment for it will be calculated taking into account the costs associated with chemical treatment, staff salaries, and equipment maintenance. If cold water from the State Unitary Enterprise “Vodokanal of St. Petersburg” is used for heating, then the payment for it is taken according to the tariff - now it is a little more than 20 rubles.
The heating tariff is calculated based on how many resources were spent on the production of thermal energy.
Confused housing residents
From January 1, 2014, a two-component tariff was introduced for consumers who do not belong to the “population” group, that is, for organizations and enterprises. In order for citizens to be able to pay according to the new principle, it is necessary to make changes to regulations. Pay by new system rules for the provision of public utilities prohibit. Since residents are still paying old scheme, housing organizations, house servicers, where present non-residential premises, got a new headache.
Charging for hot water supply consists of two parts, or components, each of which is highlighted in a separate line on the receipt - DHW and DHW heating. This is due to the fact that in Academichesky houses, water preparation is carried out directly by the management company in individual heating points of each house. In the process of preparing hot water, two types are used utility resources- cold water and thermal energy.
The first component, the so-called
DHW supply- this is directly the volume of water that passed through the hot water supply meter and was consumed indoors in a month. Or, if the readings were not taken, or the meter turned out to be faulty or its verification period has expired - the volume of water determined by calculation according to the average or standard for the quantity prescribed.. The procedure for calculating the volume DHW supply exactly the same as for To calculate the cost of this service, the tariff for cold water is applied, since the supplier has in this case It is cold water that is purchased.The second component
DHW heating- this is the amount of thermal energy that was expended to heat the volume of cold water provided to the apartment to hot temperature. This amount is determined based on the readings of the common house heat energy meter.In general, the fee for hot water supply is calculated using the following formula:
P i gv = Vi gv × T hv+ (V v cr × Vi gv/ ∑ Vi gv × T v cr)
Vi Guards- the volume of hot water consumed during the billing period (month) in an apartment or non-residential premises
T xv- tariff for cold water
V v cr- the volume of thermal energy used during the billing period for heating cold water at independent production hot water management company
∑ Vi gv- the total volume of hot water consumed during the billing period in all rooms of the house
T v cr- tariff for thermal energy
Calculation example:
Let's assume that hot water consumption in an apartment for a month is 7 m3. Hot water consumption throughout the house is 465 m3. The amount of thermal energy spent on heating hot water according to a common house meter is 33.5 Gcal
7 m 3 * 33.3 rub. + (33.5 Gcal * 7 m 3 / 465 m 3 * 1331.1 rub.) = 233.1 + 671.3 = 904.4 rub.
Of which:
233.1 rub. - payment for actual water consumption (DHW line in the receipt)
671.3 - payment for thermal energy spent on heating water to required temperature(DHW heating line in the receipt)
In this example, 0.072 gigacalories of thermal energy were spent to heat one cube of hot water.
IN a value showing how many gigacalories were required to heat 1 cubic meter of water in billing period called coefficient DHW heating
The heating coefficient is not the same from month to month and largely depends on the following parameters:
Cold water supply temperature. IN different time During the year, the cold water temperature ranges from +2 to +20 degrees. Accordingly, in order to heat water to the required temperature, different amounts of thermal energy will have to be expended.
The total volume of water consumed per month in all areas of the house. This value is largely influenced by the number of apartments that submitted their testimony in the current month, recalculations, and, in general, the discipline of residents in submitting their testimony.
Thermal energy consumption for hot water circulation. Water circulation in the pipes occurs continuously, including during the hours of minimum water withdrawal. That is, for example, at night, hot water is practically not used by residents, but thermal energy for heating water is still spent to maintain the required temperature of hot water in heated towel rails and at the entrances to apartments. This figure is especially high in new, sparsely populated buildings and stabilizes as the number of residents increases.
The average values of DHW heating coefficients for each block are given in the section “Tariffs and calculation coefficients”
With the arrival of cold weather, many Russians are concerned about how to pay for utilities. For example, To How to calculate hot water and how often you should pay for these services. To answer all these questions, you first need to clarify whether a water meter is installed in this home. If the meter is installed, then the calculation is made according to a certain scheme.
The first thing you need to do is look at the receipt for housing and communal services that came last month. In this document you should find a column that indicates the amount of water consumed for the last month; we will need figures with indicators at the end of the last reporting period.
The first thing you need to do is look at the receipt for housing and communal services that came last month
After these readings are written out, they should be entered into a new document. In this case, we are talking about a receipt for payment for housing and communal services for the next reporting period. As you can see, the answers to the questions of how to calculate the cost of hot water using a meter and how to determine its consumption are quite simple. It is necessary to take all water meter readings promptly and correctly.
By the way, many management companies themselves enter the above information into payment document. In this case, you won’t have to look for data in old receipts. You also need to remember that in situations where the water meter has just been installed and these are the first readings, the previous ones will be zeros.
The initial readings of some modern meters may contain some other numbers rather than zeros
I would also like to clarify that the initial readings of some modern meters may contain not zeros, but some other numbers. In this case, in the receipt in the column where you need to indicate the previous readings, you need to leave exactly these numbers.
The process of searching for previous meter readings is very important if you need to understand the question of how to calculate hot water according to the meter. Without this data, it will not be possible to correctly calculate how many cubic meters of water were used in a given reporting period.
So, before you start studying the question of how to calculate the cost of hot water, you should learn how to take water meter readings.
Symbols on the meter
Almost all modern meters have a scale with at least 8 digits. The first 5 of which are black, but the second 3 are red.
Important
It is important to understand that only the first 3 digits, which are black, are displayed on the receipt. Because these are cubic meters data, and it is based on them that the cost of water is calculated. But the data that is colored red is liters. They do not need to be indicated on receipts. Although these data make it possible to estimate how many liters of water a particular family consumes over a certain reporting period. In this way, you can understand whether it is worth saving on this benefit or whether the consumption is within normal limits. And of course, you can determine how much water is spent on bathing procedures, and how much on washing dishes, and so on.
It is important to understand that the receipt displays only the first 3 digits, which are black.
To correctly understand how to calculate the tariff for hot water, you should know on what day of the month the readings of this device are taken. Here, you need to remember that water meter data must be taken at the end of each reporting period, after which it must be transferred to the appropriate authority. This can be done through phone call or via the Internet.
On a note! It should be remembered that the figures are always indicated at the beginning of the reporting period (that is, those that were taken last month) and at the end (these are those that are being taken now).
This regulation is prescribed in the Decree of the Government of the Russian Federation dated May 6, 2011, number 354.
How to calculate the service correctly?
It is no secret that the legislation of our country is constantly changing, and therefore citizens are beginning to worry about the question of how to calculate hot water or any other utility costs.
If we talk specifically about water, then we should take into account the fact that payment consists of certain components:
- indicators of a water meter, which is located in the room and controls the flow of cold water;
- indicators of the meter, which shows the consumption of hot water in a given apartment;
- indicators of a device that calculates the cold water consumption of all tenants;
- data from the meter that monitors the consumption of the residents of the house; it is installed in the basement of the house;
- the share of a specific apartment in the total expense;
- the share that corresponds to a specific apartment in this building.
The penultimate indicator is the most incomprehensible, although in fact everything is quite accessible. It is taken into account when determining the amount of resource that was spent on everyone. It is also called “general house needs”. This, by the way, also applies to the last indicator; it is calculated when general house needs are calculated.
Calculation of hot water consumption
As for the first two indicators, they are quite understandable. They depend on the residents themselves, because a person can choose for himself whether to save the consumption of a particular resource or not. But in other cases it all depends on how often it is done wet cleaning in the entrance of the house, on the number of riser leaks, and so on.
The worst thing about this calculation system is that almost the entire part of the general household needs is fictitious. After all, in every building there are residents who incorrectly indicate their individual indicators, or, for example, one person is registered in their apartment, but five live. Then the general house needs had to be calculated based on the fact that 3 people live in apartment No. 5, and not 1. In this case, everyone else would have to pay a little less. As you can see, the question of how to calculate hot water still needs careful research.
That is why our officials are still trying to figure out how to calculate the fee for hot water and which mechanism would be the most successful.
Do everyone have the same rates?
To save money, you should always tighten the tap if this moment no need to use water
To do this, just go to the website of the management company or just call them. Also, similar information is contained on the receipt that comes to each resident.
After this data has been found, the cost of the consumed cubic meters of resource should be calculated. Next, calculating the payment for hot water is quite simple; this is done in the same way as in the case of all other resources. You should take the number of cubic meters spent and multiply by the specific tariff.
It should be noted that today there are many ways you can save hot water consumption, thereby reducing your costs for paying for it. To do this, you can use special nozzles on the faucet; they will help you not spray water so much and control the pressure power. You should also open the tap valve not at full strength, so the stream will flow under less pressure, but the water will not fly out in all directions. And of course, you should always turn on the tap if you don’t need to use water at the moment. For example, when a person brushes his teeth or washes his hair (while his head is soaped or smeared Toothbrush, the water tap can be closed).
All these tips will help reduce the cost of paying for hot or cold water, thereby helping to correctly calculate hot water consumption.
Difference between hot and cold water calculations
Of course, this formula, as well as the one that takes into account hot water consumption, has many flaws. Due to the fact that general house indicators are taken into account, it is difficult to control where the difference went between the individual indicators of all residents and the data that was taken from the water meter installed on the house. Perhaps this is really true, and all this water was used to clean the entrance. But this is hard to believe. Of course, there are tenants who deceive the state and give incorrect data, but there are also errors in the work of the pipeline system(the drain pipes in most houses are old and can leak, so the water goes nowhere).
Hot water invoice
For a long time now, our government has been thinking about how to correctly calculate hot and cold water and how to improve the existing mechanism.
For example, in 2013, our authorities came to the conclusion that it was necessary to establish standard norms for general household needs and that this data should be taken into account when calculating the cost of one cubic meter water. This helped to slightly restrain the zeal of our management companies and help the citizens of the country. You can find out these numbers from the management company. But this only applies to those cases where residents have entered into an agreement with the management company. If we are talking about Vodokanal, then here in every locality a separate fixed minimum payment will be established. And, for example, an overpayment in a given reporting period may cover expenses in the next one.
As you can see, there is a whole diagram that makes it clear how to calculate hot water heating or how to calculate how much to pay for cold water consumption.
Calculation of the cost of thermal energy for heating 1 sq. meters total area in 2017:
January-April 0.0366 Gcal/sq. m * 1197.50 rub/Gcal = 43.8285 rub/sq.m.
May 0.0122 Gcal/sq. m * 1197.50 rub./Gcal = 14.6095 rub./sq.m
October 0.0322 * 1211.33 rubles/Gcal = 39.0048 rubles/sq.m.
November-December 0.0366 Gcal/sq. m * 1211.33 rub./Gcal = 44.3347 rub./sq.m
Calculation of the cost of service for hot water supply per person in 2017:
January-June 0.2120 Gcal/per person. per month *1197.50 rub./Gcal = 253.87 rub./person.
July-December 0.2120 Gcal/per person. per month *1211.33 rub./Gcal = 256.80 rub./person.
Calculation of the cost of service for hot water supply using a domestic hot water meter in 2017:
January – June 0.0467 Gcal/cubic. m * 1197.50 rub./Gcal = 55.9233 rub./cubic. m.
July-December 0.0467 Gcal/cu.m. m * 1211.33 rub./Gcal = 56.5691 rub./cubic. m
2016
Calculation of the cost of thermal energy for heating 1 sq. meters of total area in 2016:
January-April 0.0366 Gcal/sq. m * 1170.57 rub/Gcal = 42.8429 rub/sq.m.
May 0.0122 Gcal/sq. m * 1170.57 rub./Gcal = 14.2810 rub./sq.m
October 0.0322 * 1197.50 rubles/Gcal = 38.5595 rubles/sq.m.
November-December 0.0366 Gcal/sq. m * 1197.50 rub./Gcal = 43.8285 rub./sq.m
Calculation of the cost of hot water supply services per person in 2016:
January-June 0.2120 Gcal/per person. per month *1170.57 rub./Gcal = 248.16 rub./person.
July-December 0.2120 Gcal/per person. per month *1197.50 rub./Gcal = 253.87 rub./person.
Calculation of the cost of service for hot water supply using a domestic hot water meter in 2016:
January – June 0.0467 Gcal/cubic. m * 1170.57 rub./Gcal = 54.6656 rub./cubic. m
July-December 0.0467 Gcal/cu.m. m * 1197.50 rub./Gcal = 55.9233 rub./cubic. m
2015
Calculation of the cost of thermal energy for heating 1 sq. meters of total area in 2015:
Heating consumption standard * Thermal energy tariff = cost of thermal energy for heating 1 sq. m:
January-April 0.0366 Gcal/sq. m * 990.50 rub./Gcal = 36.2523 rub./sq.m
May 0.0122 Gcal/sq. m * 990.50 rub./Gcal = 12.0841 rub./sq.m
October 0.0322 * 1170.57 rubles/Gcal = 37.6924 rubles/sq.m.
November-December 0.0366 Gcal/sq. m * 1170.57 rub./Gcal = 42.8429 rub./sq.m
Calculation of the cost of hot water supply services per person in 2015:
DHW consumption standard * Heat energy tariff = cost of DHW service per 1 person
An example of calculating the cost of a hot water supply service for 1 person with a fully equipped apartment (from 1 to 10 storeys, equipped with a sink, washbasin, bathtub 1500-1700 mm long with shower) in the absence of hot water meters:
January-June 0.2120 Gcal/per person. per month *990.50 rub./Gcal = 209.986 rub./person.
July-December 0.2120 Gcal/per person. per month *1170.57 rub./Gcal = 248.1608 rub./person.
Calculation of the cost of service for hot water supply using a domestic hot water meter in 2015:
The standard thermal energy consumption for heating is 1 cubic meter. m of water * Tariff for thermal energy = cost of service for heating 1 cubic meter. m
January – June 0.0467 Gcal/cubic. m * 990.50 rub./Gcal = 46.2564 rub./cubic. m
July-December 0.0467 Gcal/cu.m. m * 1170.57 rub./Gcal = 54.6656 rub./cubic. m
year 2014
Calculation of the cost of thermal energy for heating 1 sq. meters of total area in 2014:
Heating consumption standard * Thermal energy tariff = cost of thermal energy for heating 1 sq. m:
January-April 0.0366 Gcal/sq. m * 934.43 rub./Gcal = 34.2001 rub./sq.m
May 0.0122 Gcal/sq. m * 934.43 rub./Gcal = 11.4000 rub./sq.m
October 0.0322 Gcal/sq. m * 990.50 rub./Gcal = 31.8941 rub./sq. m
November – December 0.0366 Gcal/sq. m * 990.50 rub./Gcal = 36.2523 rub./sq.m
Calculation of the cost of hot water supply services per person in 2014:
DHW consumption standard * Heat energy tariff = cost of DHW service per 1 person
An example of calculating the cost of a hot water supply service for 1 person with a fully equipped apartment (from 1 to 10 storeys, equipped with a sink, washbasin, bathtub 1500-1700 mm long with shower) in the absence of hot water meters:
January-June 0.2120 Gcal/per person. per month * 934.43 rub./Gcal = 198.0991 rub./person.
July – December 0.2120 Gcal/per person. per month * 990.50 rub./Gcal = 209.986 rub./person.
Calculation of the cost of service for hot water supply using a domestic hot water meter in 2014:
The standard thermal energy consumption for heating is 1 cubic meter. m of water * Tariff for thermal energy = cost of service for heating 1 cubic meter. m
January – June 0.0467 Gcal/cubic. m * 934.43 rub./Gcal = 43.6378 rub./cubic. m
July – December 0.0467 Gcal/cubic. m * 990.50 rub./Gcal = 46.2564 rub./cubic. m
year 2013
Calculation of the cost of thermal energy for heating 1 sq. meters of total area in 2013:
Heating consumption standard
- January-April 0.0366 Gcal/sq. m * 851.03 rub./Gcal = 31.1477 rub./sq.m
- May 0.0122 Gcal/sq. m *851.03 rub./Gcal =10.3826 rub./sq.m
- October 0.0322 Gcal/sq. m * 934.43 rub./Gcal = 30.0886 rub./sq. m
- November – December 0.0366 Gcal/sq. m * 934.43 rub./Gcal = 34.2001 rub./sq.m
Calculation of the cost of service for hot water supply per 1 person in 2013:
DHW consumption standard
An example of calculating the cost of a hot water supply service for 1 person with a fully equipped apartment (from 1 to 10 storeys, equipped with a sink, washbasin, bathtub 1500-1700 mm long with shower) in the absence of hot water meters:
- January-June 0.2120 Gcal/per person. per month * 851.03 rub./Gcal = 180.4184 rub./person.
- July – December 0.2120 Gcal/per person. per month * 934.43 rub./Gcal = 198.0991 rub./person.
Calculation of the cost of service for hot water supply using a domestic hot water meter in 2013:
The standard thermal energy consumption for heating is 1 cubic meter. m of water
- January – June 0.0467 Gcal/cubic. m * 851.03 rub./Gcal = 39.7431 rub./cubic. m
- July – December 0.0467 Gcal/cubic. m * 934.43 rub./Gcal = 43.6378 rub./cubic. m
year 2012
Calculation of the cost of thermal energy for heating 1 sq. meters of total area in 2012:
Heating consumption standard * Thermal energy tariff (supplier MUP "ChKTS" or Mechel-Energo LLC) = The cost of thermal energy for heating 1 sq. m
- January-April 0.0366 Gcal/sq. m * 747.48 rub./Gcal = 27.3578 rub./sq. m
- May 0.0122 Gcal/sq. m * 747.48 rub./Gcal = 9.1193 rub./sq. m
- October 0.0322 Gcal/sq. m * 851.03 rub./Gcal = 27.4032 rub./sq. m
- November - December 0.0366 Gcal/sq. m * 851.03 rub./Gcal = 31.1477 rub./sq. m
Calculation of the cost of hot water supply services per person in 2012:
DHW consumption standard * Heat energy tariff (supplier MUP "ChKTS" or Mechel-Energo LLC) = cost of DHW service per 1 person
An example of calculating the cost of a hot water supply service for 1 person with a fully equipped apartment (from 1 to 10 storeys, equipped with a sink, washbasin, bathtub 1500-1700 mm long with shower) in the absence of hot water meters:
- January - June 0.2120 Gcal/per person. per month * 747.48 rub./Gcal = 158.47 rub./person.
- July - August 0.2120 Gcal/per person. per month * 792.47 rub./Gcal = 168.00 rub./person.
- September - December 0.2120 Gcal/per person. per month * 851.03 rub./Gcal = 180.42 rub./person.
Calculation of the cost of hot water supply services using a domestic hot water meter in 2012:
The standard thermal energy consumption for heating is 1 cubic meter. m of water * Tariff for thermal energy (supplier MUP "ChKTS" or LLC "Mechel-Energo") = cost of service for heating 1 cubic. m
- January – June 0.0467 Gcal/cubic. m * 747.48 rub./Gcal = 34.9073 rub./cubic. m
- July – August 0.0467 Gcal/cubic. m * 792.47 rub./Gcal = 37.0083 rub./cubic. m
- September–December 0.0467 Gcal/cubic. m * 851.03 rub./Gcal = 39.7431 rub./cubic. m