Dyeing fur with hair dye. Detailed instructions. Dyeing natural fur at home

Dear Clients

Prepayment for sewing products is not less than 50% of the cost of work.

The Lynx factory also offers Additional services, such as: painting, cutting and hauling.

Dye furs are produced in different colors. We dye both individual skins and finished goods made of fur (we don’t paint sheepskin coats) .

When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked to see if it can be painted.

If you wish, you can check it yourself : Take your fur item that you want to dye, lightly peel off the lining and wet the skin well. After this, forcefully pull the soaked skin into different sides, if the skin is torn, it means that poor-quality workmanship was used in the tailoring and when painting, your product may fall apart - paint it IT IS FORBIDDEN, if the skin easily stretches to the sides - paint CAN .

We warn you in advance that when sewing a fur product, many companies often stretch the skin to make it larger, such things after painting I can shrink up to 30% .

Painting of fur products

SHEEPSKIN COATS, SHEEPSKIN (NOT SHEARED) AND LEATHER - WE DO NOT DYE!

• Painting time 2 weeks
• Shrinkage of a fur product during painting 30% (1 size)
• Shrinkage during dyeing always occurs and the product shrinks unevenly
• It is necessary to restore (restore) the product after dyeing Necessarily!

  Restoration of products after dyeing
  

  Size	In Malakhovka
  Vest	10,000 rub.
  Jacket (length up to 65 cm)	from 15,000 to 18,000 rub.
  Short fur coat (length up to 90 cm)	from 18,000 to 20,000 rub.
  Short fur coat (up to 105 cm)	from 20,000 to 23,000 rub.
  Long fur coat (from 110 cm)	25,000 rub.
  Cover with new lining	25,000 rub.
  Flare (depending on the length of the product)	from 10 - 30%
  Hood	2,000 rub.

  Prices do not include the cost of the stock (up to size 50)

  A little history about dyeing coats, fur and skins

  Animal fur has been necessary for humanity throughout the history of its existence. And today, fur remains a valuable and commercially viable product, because it is used not only for warmth, but also for decoration and, undoubtedly, is a luxury item.

  The skins of fur-bearing animals consist of a dense undercoat and longer, stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, and the longer guard hair is to protect the skin during rain or snow. Fur pelts are mainly sold at auction. Most of them are bought back manufacturing companies, specializing in sewing products using fur or brokers. The largest auction centers are located in New York, Montreal and St. Petersburg.

  In the modern fur industry, fur is used for sewing or decorating outerwear. Often, in order for the finishing color to go well with the color of the main material of the product, it is used fur dyeing in different tones. High quality dressing and dyeing fur is very important, because this will determine how long the product made from it will last. Many people are interested in the question: is it possible dye the fur so that it does not lose its quality? Certainly! Moreover, if painting skins was produced in compliance necessary technology, fur can last longer. That's how dye natural fur Only professionals know how to ensure that the skins remain soft and elastic. Sometimes the fur, on the contrary, is bleached or this method is used dyeing natural fur, in which only longer hairs are shaded. This is exactly what happens in some cases silver fox fur dyeing. Same method can you dye arctic fox fur and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coat in one color, if there are skins that are identical in softness, length of pile and density of the undercoat, but initially different in color.

  Selecting skins for a product is not an easy task and requires a lot of furrier experience. The advantage of fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases it may also be necessary dye mink fur, arctic fox or other fur-bearing animal to match the color of the skins that were selected for the product. Give fresh look a coat or fur coat that has been worn for several years, perhaps if dye old fur into a different, more saturated shade. A competent selection of fur makes the fur coat look like it was sewn from one large skin, without focusing on the joining of different fragments.

  Information about where can you dye fur, now it won’t be difficult to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, great experience in working with different types fur, so you should have no doubts, where to dye real fur .

  Fur skins can be dyed different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.

  Where to dye fur in Moscow can be found out from various sources. It should be taken into account that this procedure is quite expensive and only a high-quality service can guarantee good result and don't disappoint. Therefore, trust only verified sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the painting method and the used chemicals, (size, length, style) if this is a product.

  Examples of fur and skin dyeing work

It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their shine over time. appearance. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.

How to dye arctic fox fur at home

Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:

• hair dye;
• fatty cream (can be replaced with glycerin);
• hair balm;
• rubber medical gloves;
• brush or old Toothbrush for applying coloring composition;
• vinegar.

Your actions:

1. Lubricate the inside with cream.
2. Stretch the material flat surface, secure it.
3. Thoroughly moisten the previously cleaned surface with water.
4. Wear gloves and apply quickly coloring composition, smoothing the pile with your hand.
5. Wait for the period of time specified in the dye instructions.
6. Rinse the lint under running water warm water, rinse in vinegar solution.
7. Treat the item with balm diluted in water and rinse.
8. Lubricate the inside again with cream, carefully stretch it, pin it with pins, and let it dry.

Dyeing a mink coat

The mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:

• hair dye;
• spray;
• a comb with fine teeth;
• shampoo;
• hair balm;
• fatty cream (glycerin is possible).

Your actions:

1. Clean the item from grease and dirt.
2. Treat the flesh with cream.
3. Prepare the coloring composition according to the instructions.
4. Lightly moisten the surface with water using a spray bottle.
5. Apply coloring matter onto the pile with a spray bottle from a distance of 50 cm.
6. Even out the tone by combing the surface with a comb.
7. Wait half an hour.
8. Wash off the coloring composition warm water with shampoo.
9. Rinse with balm diluted in water.
10. Apply the cream to the flesh.
11. Lay out the product and leave it to dry.
12. Comb the fibers in the desired direction.

Fur cleaning

Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:

• water – 1 l;
• salt – 2 tsp;
• ammonia – 1 tsp;
• detergent(dishwashing gel, washing powder) – 1 tsp;
• baking soda– 2 tsp.

Your actions:

1. Dissolve the ingredients in water, stir well until smooth.
2. Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
3. Apply the resulting solution evenly to the pile using a brush.
4. Rinse thoroughly running water.
5. Lay the item out and let it dry at room temperature.

Coloring fur with hair dye

The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket, store household chemicals. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.

Spray for coloring fur

Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.

Video: is it possible to dye a mink coat?

Dyeing fur with hair dye at home has now received widespread. The fur of mink, khanorika, kolinsky, marten, muskrat and other animals can be painted with durable household cream paints. There are currently a large number of various cream paints, prices range from several hundred to tens of rubles.

To dye fur, it is advisable to choose a paint that is not expensive, lightfast and resistant to aquatic environment. It is very convenient to paint small skins, pieces and ready-made fur caps for hats with such paints. One or two packs are required for one skin, depending on the size of the fur and the fur. Paint consists of the contents of two tubes: a tube of paint and a tube of oxidizing agent (peroxide). After mixing the contents of two tubes in a separate container, the paint is applied as a spread and rubbed into the fur with a swab.

When dyeing fur with oxidizing or acidic dyes, many inconveniences arise. For example, when painting with oxidizing dyes, it is not advisable to paint one or two skins or a sewn fur cap for a hat, since several components are required: black urzol for fur D, pyrocatechin or resorcinol, ammonia 25%, salt and oxidizing agent (perhydrol 30%). Before painting, the fur must be etched in a chromium paint in an acidic environment. The etching and painting processes are lengthy and take up almost the entire daylight hours; painting is carried out using the dip method in separate baths at a temperature of 35 -38 degrees.

When dyeing fur with acid dyes, the skins must be tanned with an increased amount of chrome tanning agent so that the skins do not cook. The temperature of the dye solution is 60 - 65 degrees.

It is not advisable to dye fur in small quantities; it is more economical to prepare a batch of skins and spend the entire daylight hours on dyeing.

When dyeing fur with hair dyes, everything is much simpler; you can dye one or two skins in 1 - 2 hours, using a spread method, rubbing the dye into the fur. This wastes one or two packs of paint. The costs are small.

What hair dyes can you use?

From large quantity When using household cream paints, you need to choose paints that provide the dyed fur with good resistance to light, water and mechanical stress. When painting mink fur, depending on whether the fur is old or new, the paint consumption is small. If we need to dye skins with long-haired fur (arctic fox, fox, silver fox or sable), paint consumption increases significantly, especially when dyeing light skins in dark colors and new fur. In this case, the issue of price is acute.

For dyeing mink, muskrat and other fur skins, the following stable household cream hair dyes have proven themselves to be effective: FARA, IMPRESION +, PRESTIGE. Dyed items retain color for 2–3 years, are not washed off with water, and are almost indistinguishable in color from natural, undyed skins.
Paints Fara, Impression, Prestige

Selection of shades for different fur colors

You need to dye the fur in a tone that will be an order of magnitude darker than the existing one. For example, if you need to dye brown mink fur, be sure to use a darker dye. FARA paint – dark brown No. 502 is suitable for natural brown mink. Mink fur, like any other, is dyed differently. New fur that has not been exposed to sunlight (new skins) dyes very poorly; you have to increase the concentration of dye by adding a darker one.

So, for example: you can add half a tube of black paint No. 501 to dark brown paint FARA No. 502. You can increase the concentration even more by adding half a tube of dark brown paint No. 502 to a tube of black No. 501.

New mink or muskrat fur does not dye well, so often after drying it is necessary to repaint it again in the same way in order to achieve dark shades. Old (worn) fur of mink, muskrat and other animals, which has been exposed to sunlight, dyes much better and the longer the fur is worn, the more intense the color. Within 30 minutes to an hour, the skin is completely painted with dark brown FARA dye No. 502 or No. 501.
Tinted shampoo IRIDA

Light tones of fur, for example: gray or blue mink, are better tinted in the same tone with hair dye - IRIDA. For yellow or white mink it is also better to choose paint to match. After dyeing, the fur is renewed, the color becomes brighter and more saturated. Light new skins are difficult to dye in dark tones; it is often necessary to repaint them, increasing the concentration according to the method described above. There are no such problems with old light fur; it can be easily dyed black or Brown color.

It is better to tint long-haired fur (arctic fox, fox) in a natural color, choosing paint according to color. When painting in dark colors, and even when the skins are new, much more paint is used.

Preparing the product for painting

Fur skins, individual pieces or a finished sewn fur cap for a hat need to be prepared for painting. Fur pelts must first be tested for exposure to water. Fur, before dyeing, must be degreased and cleaned of dirt by washing. Then it is thoroughly washed in water, dyed, washed and washed again. Skins, due to long-term storage or socks, new skins due to improper dressing may lose their strength and, when exposed to water, swell and tear. That's why all skins need to be tested for water before painting. Separate pieces or thin places of the skin are soaked or thrown into a bowl with warm water and observed for 10 - 15 minutes; if nothing happens to the skins, they remain strong, such skins can be dyed. It happens the other way around: the skins swell, tear when stretched a little, and even worse, they become limp, like blotting paper. Such skins must be discarded, otherwise big problems will arise.

Before painting, defects on the skins are eliminated: bald spots, worn out and moth-eaten areas, bites and tears. These places are cut out in the shape of a fish, inserts are sewn in, or simply cut out and stitched. Weak skins, especially at seams, are strengthened by gluing strips of nonwoven fabric spunbond or non-woven fabric, glue MOMENT 1. Glue MOMENT 1 is ideal for skins.

The process of dyeing natural fur with hair dye

Before painting, a fur skin or a fur cap for a hat, which you have cut out and sewn from whole skins or worn fur (an old hat or collar), must be degreased by washing, since greasy and dirty hair doesn't paint well. Unpainted areas and stains appear.

Prepare water in a cup room temperature, add washing powder in a small amount and wash gently. The skins should already be tested for water, as sometimes the skins swell and tear from water. To prevent the skins from tearing, wash them without sudden movements and try not to twist them when squeezing. After washing, the skin is rinsed in clean warm water, lightly wrung out and prepared for painting.
Paint preparation process

The paint is prepared according to the instructions included in the box. Squeeze the hair dye and oxidizing agent (peroxide) out of the tube into a separate bowl and mix everything well. Spread the paint onto the skin or sewn fur cap using a sponge and rub it into the fur. The skin is rolled up and placed in a cup. After 10 - 15 minutes they come up and rub the paint well into the fur again. They constantly watch how the skin is dyed. After half an hour, darkening of the fur appears (if the mink is dyed brown), the longer the dyeing, the darker the color. Worn fur dyes faster.

At the end of painting, the skin is rinsed in clean warm water, and then washed with powder in warm water, rinsed several times until clean water. The skin is wrapped in a towel and gently squeezed without twisting, so as not to tear. Then the skin needs to be dried.

How to dry fur properly

To dry dyed fur, you need to use a hair dryer; it is best and more effective to use an old-style vacuum cleaner that has reverse thrust. Under the influence of an air stream, the fur quickly dries and fluffs up. If these are new skins and not cut along the belly, they can be pulled over the rules with the fur outward and dried. The cut ones are stretched with nails on the shield with the fur facing out, after drying they are removed and crumpled. Such dyed skins can later be used to sew new hats or repair fur coats. Finished sewn and dyed fur caps for hats made by molding are dried with an air stream and, half-baked, pulled onto the block.

When repairing mink coats, it is sometimes necessary to tint the brown fur directly on the coats. The paint is rubbed with a swab into the faded area, after painting it is quickly washed off with water and dried with an air stream.

A little about secrets...

During production fur hats using the mold method, when sewing fur caps, sometimes you have to insert light fur. After dyeing, pulling a fur cap over the block and drying, it turns out that light fur has a different color. In this case, you can tint the skin directly on the deck by removing the nails. High concentration paint is applied a second time to the unpainted area. After dyeing, the paint is washed off and the fur is quickly dried with an air stream.

As a result of prolonged wear and strong exposure sun rays, mink fur becomes hard to the touch, such fur needs to be checked before cutting. A piece of such fur is dyed separately, after drying the fur is dyed disgustingly, the ends of the hair turn grey, the color is very bad. Sometimes, in a hurry, such fur appears on the finished cap, then you need to cut out this piece and replace it with a good one.

Often relying on the quality of the skin, it turns out that after dyeing the skin begins to tear. You can get out of this situation, pull the dried cap onto the finished block and glue the entire cap with pieces of spunbond using MOMENT 1 glue. When pulled onto the finished block, the skin will no longer tear.

When sewing a fur cap for a hat made by molding, you need to remember that the skins decrease in size after dyeing and drying, so the cap is cut out larger in the beat.

Other dyeing methods

Fur can be dyed in many ways. For these purposes, there are oxidative, direct, active, acidic and other whole line dyes, including natural preparations. When painting, the dipping method is mainly used and, less often, the spreading method. All these methods are labor-intensive and require, in addition to the use of basic dyes, a whole range of additional preparations.

When dyeing fur at home, it takes all daylight hours. A finished fur product (hat, fur coat, vest) cannot be dyed using the dip method; the fur skin must be separated from lining material, and when painting, shrinkage of the skins is possible; the skins decrease in size when drying. You can tint some defective areas (worn or faded), for example, on a fur coat or hat, by rubbing the paint into the fur using a spread method, and then quickly rinse with water and dry. With this method, household cream hair dyes have proven themselves to be excellent. Sometimes like this problem areas tinted with aerosols by spraying paint.

Spray for coloring fur

Often finished fur products (hats, fur coats) look excellent when worn for a long time, but faded spots appear in some places. In this case, there is no need to paint the entire thing, just tint problem areas using a spray.

To dye fur, you can use aerosol paint for caring for suede. It consists of metal cans of spray paint.
Aerosol for suede care

You need to choose the right one desired shade, otherwise the dyed fur will differ sharply from the main one. The area that needs to be tinted is cleaned of dirt and can be degreased with alcohol and wiped with a swab. It is advisable to cover the fur with any material, except for tinted spots. We spray the paint at a distance of 30 -40 cm so that the fur does not stick together and a uniform color is obtained. In this way you can get excellent result, the painted areas will not differ much from natural fur, the paint will last for several months.

Caring for dyed fur

As a result of painting fur skins, individual pieces, fur caps for hats with persistent household cream hair dyes, carried out using the spread method, by rubbing the paint into the fur, we obtain a stable color. Dye long time When worn, the fur is resistant to light, water and mechanical stress. Such items do not require special care; the requirements are the same as for any fur product.

The requirements for fur dyed by spraying are completely different. The color is not particularly durable, so it is better to protect such a product from the influence of light, water, mechanical stress and elevated temperature.

In order for the dye to stick better and the fur to shine, it can be treated with a special balm for the care of dyed hair. After this treatment, the fur becomes softer and fluffier.

Fur products require daily care, combing more often, and require thorough cleaning. Much depends on proper storage. Fur should be covered and stored in a dark place.

Any fur item looks very beautiful and expensive on any girl, and you can wear it for many years. However, such things have a huge drawback - after long wear, the fibers begin to fade and lose their original appearance. From this article you will learn how to dye arctic fox fur at home, so that you can continue to enjoy showing off in a warm, beautiful thing.

Preliminary preparation

Before you start painting a fur product, you need to prepare it, namely, get rid of all dust and dirt on the fibers. Otherwise, after the painting procedure, unpleasant stains and stains may form on the product, causing it to lose its former attractiveness even more.

So, for the cleaning procedure of a fur garment, you need to prepare an alkaline solution. For a liter of water, the following proportion must be observed:

• 1 tsp. dishwasher detergent or washing powder;
• 5 g of ammonia;
• 12 g table salt;
• 10 g soda.

Important! If you don’t have ammonia and soda at home, prepare a solution that requires other ingredients in equal proportions:

• Alcohol.
• Vinegar.

The cleaning process is as follows:

1. Mix all ingredients.
2. Apply the resulting liquid mixture to the entire area of ​​the fur product using a brush.
3. Rinse the product with clean water.

Important! To avoid drying out, lubricate the inside of the product with some rich hand cream.

Let's move on to painting

Although any fur is a delicate material, you can dye arctic fox fur at home, and in different ways. Now we will talk about them.

Universal method

Since animal fur is very similar in structure to human hair, it is better to use good colors for hair. This method Suitable for coloring the fur of arctic fox, mink and rabbit.

Important! Don't forget to pay attention to the structure of the villi. For example, mink fur and arctic fox fur have stiffer hairs, which cannot be said about rabbit or silver fox. For this reason, two packages of dye may be needed.

The first step is to make sure that the desired shade is selected. For this reason, before starting to dye the entire garment, test the effectiveness of the substance on an inconspicuous area of ​​the garment. Further:

• Apply paint using a brush.
• Spread the mixture over the surface with your own hands.

Important! For this it is better to use gloves.

• Leave the substance on the product for as long as it is written on the packaging.
• Rinse the item thoroughly with clean warm water.
• Leave it to dry.

Important! When drying, it is better not to use fans or hair dryers - this will only harm the pile.

• After the product has dried, you need to place it in a solution of warm water and vinegar - this will help fix the paint on the pile and extend the wear period.

Important! To add extra shine to mink, rabbit or arctic fox fur, you can use hair conditioner. To do this, apply a solution of water and balm to the fur, leave for several minutes and rinse it off.

It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave as you wish. Eg:

• Mink fur from being dyed light color, may turn yellow and lose its expensive appearance forever.
• On the contrary, you can experiment with white rabbit fur, giving it different shades, however, it is strictly forbidden to lighten it.

Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop where professionals will undertake this procedure.

Painting a mink

A mink fur coat is distinguished by its expensive appearance and durability to wear. In order to dye mink fur at home, you need to stock up on the following materials:

• Color-matching hair dye.
• Spray.
• Comb with frequent teeth.
• Shampoo and hair conditioner.
• Fat cream.

To paint mink coat or a header, you must follow the given algorithm:

1. Pre-clean the item from grease and dust.
2. Treat the inside with rich hand cream.
3. Prepare hair dye according to the instructions on the package.
4. Lightly moisten the fur surface using the prepared spray bottle.
5. Now you can move on to the main procedure - start dyeing a mink coat at home. To do this, you need to apply the dye using the same spray bottle. The distance should be approximately 55 cm.
6. Even out the tone by going over the surface with a comb.
7. Wash off the dye with warm water and shampoo, rinse the product with a solution of water and hair balm.
8. Apply cream or glycerin to the flesh again.
9. Place the product on a flat surface and wait for it to dry.
10. Comb the pile in the direction of its growth.

Dyeing an arctic fox fur coat

The arctic fox coat lends itself best to coloring artificially. To paint it in desired color, you need to prepare the following materials:

• Hair dye that matches the shade of the fur product.
• Glycerin or fatty cream.
• Balm.
• Gloves.
• Brush for applying paint.
• Vinegar.

To carry out artificial coloring of fur at home, you must follow the given algorithm:

1. Lubricate the inside with fatty cream or glycerin.
2. Stretch the material on a flat horizontal surface.
3. Wear protective gloves and begin applying the coloring composition, simultaneously smoothing out the lint with your hand.
4. Wait for the time indicated on the paint packaging.
5. Rinse the product in warm water.
6. Wash it in vinegar solution.
7. Treat your fur coat or hat with balm diluted in water, rinse off the solution after a couple of minutes.
8. Lubricate the inside with fatty cream a second time, stretch it and let it dry on its own.

Natural fur coat - refers to image clothing. Such things are bought for more than one season. Time and cleaning make the fur dull, light colors turn yellow, dark colors fade. It is possible to restore the tone by painting. This is carried out in special workshops, sometimes the service is provided by dry cleaners. Regardless of high price You may be refused if the fur, in their opinion, is worn out. More often than not, people are simply too lazy to do such work; it is much easier to refresh the shade of a collar or hat. Work with outerwear responsible, takes a lot of time. The solution is simple; you can dye your fur coat yourself.

Before painting, you need to determine whether the product was previously tinted (during production). Mink has the most varied natural color in the elite segment. It can be black, mahogany (brown), walnut, pearl, silver. The naturalness of the shade is easily determined. If the down is lighter than the spine, the core is plain and white, the product has not been tinted. Even color is a sign of artificiality. The inside of the skin will also be dark. Products that have previously been processed require special care.

It is recommended to choose the desired color a couple of shades darker than the actual one. It is not recommended to lighten dark colors. Multi-colored rabbit or previously dyed colored materials may produce unexpected, undesirable results. White fur coats are tinted twice.

Stages of work on how to dye a fur coat at home

1. Buy hair dye at the grocery store. Don’t skimp, choose a durable, well-proven one. If the clothing area is large, take several packages. It is with this paint that you can give faded fibers a new color and shine. If the kit does not include a balm for colored hair, you will also have to buy it.
2. Prepare the item thoroughly before painting. Clean from dust and grease. To do this, you can use one of the solutions:
- water 1 liter, 1 dessert spoon of salt plus the same amount of soda, 10 drops of ammonia ( ammonia);
- equal proportions of water, vinegar, alcohol;
- water with shampoo.
Moisten the cloth. Wipe the fur. Without rubbing, in one direction. Rinse off any remaining detergent.
3. Inner side things are thoroughly coated with glycerin or a very rich cream. The base will not be saturated with water.
4. Wear protective gloves.
5. Read the instructions on the paint you purchased. Follow the recommendations when mixing ingredients.
6. Using a wide brush, apply the mixture to the pile, using a wide-toothed comb and using your hand, distribute the mixture evenly. To paint paired elements, dilute the paint once.

Clue

Prepare more mixture, paint induced in different time, from different boxes may have a different shade in the future.

7. Follow the instructions for the time required
8. Rinse off the coloring composition with running water. You need to do this together. Do not soak your fur coat in water. While holding the clothes hanging, rinse the pile thoroughly.
9. To fix the color, rinse in cold water with vinegar (when watering the fur, try not to let the skin become limp).
10. Apply conditioner for colored hair. Leave for a couple of minutes and rinse. The fur will become soft and shiny, and the smell of vinegar will go away.
11. Allow excess liquid to drain. Fold the fur coat in half and place it on a wide support.
12. Treat the skin with glycerin a second time.
13. Lay out the clothes with the fur facing out. Use a backing made of dense fabrics that absorb moisture well. Change it every two hours at first, then as needed.

Smooth and comb the product. Dry in a dry, ventilated place. Away from artificial heat sources and direct sunlight. The process takes 3 - 5 days.

Be patient. Drying quickly will cause the skins to shrink.

A strictly maintained painting process guarantees an excellent result.