Why doesn't decorative viburnum bloom? Recommendations for growing viburnum buldenezh

It has been noticed that every decorative wild plant looks best in the environment in which it grows in its natural environment, in wildlife. Ampelous stems are most suitable for vertical surfaces, growing among stones and slopes; succulents are charming on sandy open areas, and viburnum is most suited to the shores of reservoirs. No wonder in folk tales Kalinov Bridge is mentioned! Land her on the shore artificial pond or near a well or water more often - and that's almost all she needs!

This is interesting! In Russia, Buldenezh (translated from French as a snowball) came to the court of Empress Catherine II. For a long time it was grown exclusively in royal greenhouses and open parks. Later, rich townspeople began to plant entire gardens with this crop. Thanks to this, Viburnum Buldenezh gained fame as an aristocratic plant.

The viburnum variety Buldenezh belongs to the honeysuckle family and is the result of selection of the common viburnum. Elastic shoots grow upward and to the sides, forming a spreading spherical crown up to 3.5 m high. If the bush is allowed to grow in breadth, its diameter can reach 1.5 m or more, but it will become shapeless, while the recommended pruning turns it into a beautiful half-dome, strewn with white round flowers. Flowering begins in favorable weather in May and often continues until July.

The thick green crown makes the plant a decoration of the garden even outside the flowering period. The leaves are brightly colored on the front side and paler on the back. At this time, Buldenezh is no different from wild plants. It is a deciduous shrub, but even having dropped all the foliage, it does not lose its decorative appearance due to its unusual skeletal shape against the background of white snow.

Looks very impressive standard form Buldenezh, which turns the bush into a cute dwarf tree, completely covered with quivering white balls of inflorescences.

Reproduction

The flowers, which are the main advantage of this bush, are formed at the ends of young shoots and are a multitude of buds collected in a ball with semicircular petals. There are no stamens or pistils inside them - the flowers of this “snow queen” are absolutely sterile.

For this reason, propagation of this variety is carried out by cuttings, layering, grafting, and dividing the bush. You can do this as usual in spring or autumn, but spring way is preferable from an adaptation point of view, since this plant is not as frost-resistant as its wild relative.

Reproduction by layering

In spring, young, strong shoots are selected, growing low above the ground. The soil underneath is dug up, fertilized, then the shoot is tilted, buried to a depth of 10-15 cm and secured in this position with wooden pins, a metal bracket or a weight. The soil needs to be compacted and periodically well moistened until the cuttings take root. It will develop a full-fledged root system only by autumn, and then it can already be separated from the mother bush. But transplanting to a new place is possible only in the second, or even better, in the third year.

Propagation by cuttings

A rather labor-intensive method in which young seedlings can be obtained next year. Cuttings are taken during spring pruning. Suitable for planting are young (last year's) shoots that are not completely woody and have at least one internode. The leaves are removed from them and sharp knife the ends are cut off, leaving a length of 8-9 cm.

A greenhouse with moist soil mixed with humus and sand is prepared for planting. The finished cuttings are buried 3-5 cm and covered with film or glass on top. Needs to be supported high humidity, periodically opening and spraying. After they have given roots, they can be transplanted into pots that are kept warm until late autumn. For the winter they need to be placed in a cool place.

Plant on permanent place in spring in well-warmed soil.

If you plant two rooted cuttings in one hole at once, you can get a more lush decorative group planting.

Reproduction by dividing the bush

Simple and quick way, presenting no difficulties. It is necessary to find a suitable young (preferably no older than last year) shoot, which is separated from the mother plant with a sharp shovel and transplanted into a previously prepared moistened and fertilized hole.

Landing

It is carried out mainly in the spring and is subject to almost the same rules, regardless of the method in which the seedlings were grown.

Selecting a location

The main condition for the successful development of viburnum is sufficient watering, so it is better to choose a well-moistened place; it loves moist, rich loams. Good choice, as already mentioned, are the shores of natural and decorative ponds, wells, small local depressions (but not lowlands). However garden varieties Viburnums also do well on dry soils if they are provided with high-quality regular watering.

And yet, in this case, the “snowballs” become smaller, in addition, the dryness of the soil provokes an invasion of leaf-eating pests, which the weakened plant cannot resist. Evaporation from water, which the plant is deprived of in a dry place, also plays a significant role.

Lighting

In terms of illumination, light partial shade is preferable. Fully open place, especially in dry and hot areas, is undesirable, since this often leads to loss of decorativeness of the leaves, and sometimes to the death of the plant when wrong mode glaze. However, a completely open place is better than a densely shaded one.

Soil preparation

The optimal dimensions of the planting hole are 80 cm in depth and 50-60 cm in diameter. This will provide conditions for a strong root system for this plant. Despite the plant’s love for moisture, when clay soils a drainage layer (bark, broken brick, crushed stone, sand, etc.). Then add the prepared mixture of 3-4 buckets of compost, 2 tbsp. wood ash and 1 tbsp. nitrophoska. The next layer is top dressing - this can be a complex mixture containing phosphorus and potassium. You can use a mixture leaf soil, peat and humus.

Landing

The seedling is transferred along with a wet earthen lump, carefully covered with earth and lightly compacted so as not to damage the roots. The tree trunk circle is formed with a decrease towards the center. Water thoroughly and immediately mulch the soil around the bush to maintain moisture and heat. Good for mulch sawdust, bark of coniferous trees, peat chips, fallen leaves (only from healthy deciduous crops!), mown grass.

It is necessary to ensure that after the soil shrinks, the root collar does not end up too deep in the ground! Usually it is enough to leave 3-4 cm for shrinkage.

Care

Agricultural technology for viburnum Buldenezh is standard, including watering, pruning, protection from pests and, optionally, fertilizing.

Watering

This is the main condition for successful growth and beautiful flowering, especially in hot summers. Watering is required with such frequency that the earthen ball does not dry out, always remaining moist. Young seedlings require more moisture and need to be watered more often. Do not forget about watering in the fall, periodically moistening the soil abundantly in order to prevent its dehydration, especially during the period of snowless frosts.

Top dressing

Fertilizing after planting is not necessary, but the plant is responsive to organic matter, mineral complexes, etc., more lush and blooms longer, looks healthy. In mid-August, you can re-apply potassium and phosphorus.

Trimming

This culture tolerates this procedure calmly. Having chosen the shape of the future bush, you can start pruning from the first year of cultivation. Moreover, cutting branches to 1/3 of the length when planting will help it take root faster. Subsequently, during the procedure, dried branches and excess young shoots are removed. It is recommended to leave the main skeletal branches of viburnum one per year. Thus, a 10-year-old specimen will have 8 or 9 of them.

IN cold winter The bush may freeze, you should let it come to its senses. In most cases, it subsequently recovers completely.

How to give viburnum Buldenezh an interesting shape?

Using various pruning techniques, you can give the bush interesting, spectacular shapes.

Standard

It is not difficult to form a standard. To do this, you need to leave a single trunk and pinch out all the other shoots growing from the root. In subsequent years, all young shoots should be pruned, and when the trunk reaches 1.5-2 m in height, begin to form a crown using pinching and pruning. Old branches need to be cut out annually, thinning the tree from the middle.

Multi-barreled

To obtain several trunks, a young bush in the first season is cut almost to the ground before flowering, leaving a stump no more than 20 cm high. In this way, the development of many side shoots is stimulated. In subsequent seasons, pruning should be done after the end of flowering (July-August).

Pests

The main enemy of viburnum is garden aphid, which is capable of destroying all its foliage in a short period of time. Recommended folk remedies control - soap solution in the form of spraying or wood ash, which needs to be sprinkled with a thick layer trunk circle with the seizure of nearby territory. In advanced cases, insecticides are used (Aktara, Tanrek, Actellik, Agravertin).

Also, this crop is often affected by scale insects, viburnum leaf beetle and many caterpillars. Most effective means- Actellik, Askoris, Karbofos, Fosbecid.

Use in landscape design

Viburnum Buldenezh will grow in your garden long years, therefore it is important to immediately determine its role in the landscape of the site. The plant looks great in single plantings, but goes well with barberry, rowan, and hawthorn. When landscaping large areas, it is customary to place groups of 3 or 5 bushes. Planting it in the background will perfectly complete the composition using creeping junipers, Japanese spirea, paniculata and tree hydrangeas, and ground cover perennials.

In general, the plant is considered capricious to grow, but for its effectiveness and beauty, many are ready to carefully care for the “snow queen” and forgive her for her weaknesses and whims.

Viburnum Buldenezh is grown by gardeners at their dachas and used by designers to decorate plots. Decorative variety The snowball was developed by a Frenchman named Lemoine four centuries ago.. The beauty came to Russia at the behest of reigning Catherine II. Bushes of the plant could initially be seen in greenhouses and parks imperial family. Later, the nobility began to plant their gardens with viburnum. They looked unique. The branches seemed to be covered with balls of snow. Description of this ornamental plant is given below.

An exquisite plant is not grown to produce fruits; it does not produce them. But at the moment of flowering it amazes with its beauty.

"Snow Globe" serves as a species of common viburnum that takes its place in the honeysuckle family. Its height can be almost 3.5 m, diameter one and a half.

The shrub has highly branched branches. Gardeners, pruning them, give the plant a semicircular shape.. This makes the blossoming buds even more beautiful and tender. The inflorescences in the form of a ball and on a dwarf tree look great.

The leaves of this garden viburnum are large and bright, have serrations, and the veins create an interesting pattern. All shoots are covered with them. Looking at the plant, it seems that it is standing in a festive green outfit.

Ball-shaped inflorescences form on young branches. The diameter of each is 15 cm. Several petals emerge from one bud. They have no stamens. Therefore, the plant does not bear fruit.

By winter, the leaves fall off, but viburnum looks impressive even without them, since the relief is created artificially.

The blooming buds have a light green tint, then become creamy and pinkish. Having opened up, they become a snow-white lump. Due to the huge number of inflorescences, the shoots bend down. Such beauty can be observed for more than a month - up to 35 days, flowering begins in May or June.

Both individual bushes, entire plantings of them, and standard trees look great.

Nowadays, plants grown in the Moscow region grow to more than 6 meters in height and live for more than 5 decades.

Choosing a landing site

For single bushes, you can choose a place on a well-groomed green lawn. They look great near a gazebo, pond, or bench.

Viburnum will surprise with its color in group plantings. The proximity to other crops – barberry, spirea – will add elegance to the plant., forming darker foliage underneath.

The snow globe will not disappear even in poor soil, in an area where there is little light, but the inflorescences will be small and in small quantities. In order for bushes or trees to delight with exquisite snow-white buds, find a more humid place with soil acidity not exceeding 6.5. It is better to plant near a lake, fountain or well. This is good to do both in spring and autumn.

IN fertile land They dig a hole 40x40, in a poor one - up to 60. Place peat, 30 grams of nitrogen and potassium, up to 50 grams of phosphorus, deepening the plant to 5 cm.

When planting in the spring, they are pruned to a third of the length, in the fall a year later.

Bushes are placed 1.5–2 m from one another. It is necessary to take into account that the neck of the root is 3 centimeters below the soil surface. The ground under the viburnum is well moistened and covered with rotted leaves or peat.

Caring for viburnum Buldenezh

The plant will surprise with its elegance, lush flowering, only if you care for it diligently and with love. And care consists:

• V feeding various fertilizers;
• in regular loosening;
• V rejuvenation branches;
• protection against diseases and pests;
• in normal watering;
• V crown formation.

Fertilizing in spring and autumn

Feed bushes or trees before the buds swell and before they begin to shed leaves. Phosphorus and potassium at 30–40 g per square meter and 50 grams of nitrogen are taken as autumn fertilizer. In autumn, only the first substance is needed, and the dose used should be 2 times less.

The fertilizer is scattered over the surface of the soil, after which it is dug up, watered and mulched.

Trimming

In a year or two, seedlings need to form a crown. Then the bushes will be neat and lush. To do this, leave no more than four pairs of buds located at the base. This is done until the desired type of plant is obtained. Those viburnums that do not bloom well are cut off at the root, leaving the stem at a level of up to 30 cm.

Within 2 years, a shoot about a meter high appears. It is left as the trunk of the plant, and the rest is pruned.

The crown is formed after the bushes have faded and new buds begin to form. You can thin out the branches until autumn.

Plant pests

Kalina Buldenezh is not afraid of frost. If the ends of the branches freeze, which is no more than 12 cm, they are simply cut off. This is not reflected in flowering. Bushes and trees can only be covered in northern regions middle latitudes. They wrap only forked, laurel-leaved, black, evergreen. In this way they are protected from freezing. But mainly these varieties are grown in the south.

Some gardeners wonder why this exquisite plant does not decorate so many areas.

At the end of spring, insects settle in the leaves of viburnum. The emerging aphid promotes their curling; the beetles gnaw the plates, leaving only veins. This will not happen if pests are detected in time and begin to fight them.

Sometimes one treatment is not enough to control insects. Then the bushes are sprayed again. For such a purpose would be better suited sprayer with a long boom.

To exterminate the bark beetle At their dachas they buy 0.2% chlorophos. To get rid of comma scale insects, which likes to settle in the trunk and branches of viburnum, spraying is carried out using karbofos. A 0.1% solution can be found commercially for this purpose.

Often observed on leaves emergence powdery mildew or spotting. To prevent this from happening, the plant is repeatedly treated with infusions prepared from onions, tobacco or garlic.

Reproduction methods

Viburnum Buldenezh can be propagated in several ways.

Seeds

For seed propagation stratification is necessary planting material within six months - seven months. It will not germinate until August.

Initially, the root strengthens, but the bud does not develop. The emergence of cotyledons should be expected in the spring. Then the covers will be shed. By winter it should be covered with leaves or peat.

Seeds will germinate faster if kept by changing the temperature. First they should be kept warm at 18–20C, then they are placed in a cold place for three months. By resorting to propagation in this way, seedlings can be expected within one year. And only by the third, viburnum will begin to develop quickly. And it will bloom after five.

For breeding decorative species plants are more suitable for vegetative propagation, since seeds are almost impossible to obtain.

By layering

This is how you deal with layering from a bush::

• I form a hole up to 15 cm deep near the plant;
• the lower shoot is disconnected, bent down, pinned;
• the earth or peat sprinkled on top is compacted;
• the soil is constantly moistened.

If you do this in the spring, the shoots should take root before winter. And only after 2 years they are removed, separating it from the bush to another place.

This method is suitable if viburnum is already growing at the dacha.

Propagation is carried out using cuttings that have one internode. They are prepared in June by trimming the bushes. The shoots are left up to 1 cm long. Place in humus. Store in a greenhouse, covered with film, which is removed only for watering. In such a humid environment, the cuttings remain until spring. For growing, a special garden bed is made. When the bushes take root, you can begin replanting them in a permanent place in the ground.

There is another way to propagate decorative viburnum, when using seedlings with roots. It is necessary to take into account that the crown of a tree or bush has considerable width. The distance between them is set at 2 m. The root neck is deepened by 5 centimeters. After compacting the soil, water it well.

The name of the plant “Viburnum buldenezh” comes from the French “lump of snow” and was given to the shrub because of the shape of the inflorescences. We often call this viburnum a snow globe. Its main difference is in the structure of the inflorescences. In common viburnum they resemble umbrellas, and large white sterile flowers are located only at the edges.

When it blooms

In Viburnum buldenezh, all the flowers in the inflorescence are sterile (it does not produce berries) and are collected into a dense ball with a diameter of 8-10 (sometimes up to 15) cm, similar to a snowball or pom-pom. "Blooms" snowball» at the end of May - beginning of June, blooms for 2-3 weeks.

First greenish, then creamy and finally snow-white inflorescences (there are forms with pink flowers) hang on the ends of branches gracefully curved under their weight. “Snow Globe” does not form fruits, so in the fall it is decorated only with foliage that acquires red tones and does not fly off the branches for a long time.

Where does it look better?

Buldenezh is frost-resistant and requires shelter for the winter only in the north of central Russia. Single bushes and small groups of this viburnum look especially good against the background of a well-groomed green lawn at the corners and turns of paths, near a well, bench or gazebo.

Groups may consist only of viburnum or include other shrubs, such as low spirea or dwarf red-leaved barberry: these plants will only cover bottom part stems of viburnum buldenezh, allowing you to admire its inflorescences and shading them dark color foliage.

Choosing a landing site

"Snow Globe" is not very demanding on soil conditions and lighting. However, shading, dry and poor soils significantly affect the size and number of inflorescences. Having chosen a place for planting, you need to dig a hole 40x40 cm (if the soil is fertile) or slightly larger, up to 60 cm, where the soil is poor.

The pit is filled with nutritious compost, to which rotted manure can be added, and mineral fertilizers are applied. The seedling must also be prepared for planting. To do this, the shoots are cut to 1/3-1/4 of their length. At spring planting this is done immediately, and in the autumn - in the spring of next year. The ends of the roots are cut off so that they fit well in the hole and grow more actively.

Planting a bush

The bush is planted so that the root collar is 2-3 cm below the soil surface. Then the plant is watered abundantly and the trunk circle is mulched with peat or rotten leaves (layer 6-7 cm) or simply hilled up. In this case, it is necessary to regularly loosen the soil in the tree trunk circle so that a crust does not form. Under mulch, the soil remains in normal condition for a long time, so only weeding and watering are necessary.

Watering the plant

It is useful to water adult snow globe bushes at least once a year, at the beginning of flowering. In cold and rainy summers you can do without watering, but in hot and dry summers you should water several times. It must be borne in mind that excessive dryness and heat lead to a reduction in flowering time.

Viburnum buldenezh will grow in a neglected area, but this will make caring for it difficult or will negate its results. In order for watering and fertilizing to benefit the “snow globe” bush, the trunk circle with a diameter of 1 m must be free of weeds.

Top dressing

Depending on the condition of the plant and the nature of the soil, fertilizing is carried out annually or once every two years, in the spring, after the soil has dried. One bush requires 5-8 kg of nutritious compost, 25-30 g ammonium nitrate, 40-50 g of superphosphate and 10-25 g of potassium salt. Mineral fertilizers can simply be scattered evenly under the bush and incorporated into the soil by loosening. If the tree trunk circle is kept under mulch, then it is removed during watering and fertilization.

Trimming

Viburnum buldenezh, like any shrub, needs pruning, which is carried out to form, thin out and rejuvenate the bush. When starting pruning, you should remember that the flower buds of this shrub form on the shoots of the second year of life, so a heavily pruned bush will not bloom next summer. But in a year it will delight you with a particularly lush cascade of flowers.

Crown formation

Young 2-3-year-old plants, planted in a permanent place and having a sparse above-ground part, require formation pruning. To obtain a lush bush, cut off each shoot, leaving 3-4 pairs of buds from the base. This is done annually until the bush reaches the desired density and shape. Adult plants are subjected to formative pruning only to correct the crown after damage or to reduce its size.

Thinning

Thinning is carried out as needed and consists of removing weak and dead branches or parts of branches in too dense areas of the crown. Inspection of bushes of all ages must be carried out every year. Old, poorly growing and flowering bushes need rejuvenation. To do this, the plants are pruned, or rather, cut “to the stump” at a height of 15-30 cm or more.

After this operation, the dormant buds located below the cut begin to grow, forming strong young shoots. Such a rejuvenated plant requires formative pruning. All types of pruning are carried out in early spring, when the entire above-ground part is free of snow cover. After pruning, the bush needs to be well fed, then the young shoots will be strong and strong.

Pests

Unfortunately, viburnum buldenezh suffers greatly from pests, especially from the larvae and beetles of the viburnum leaf beetle and from the viburnum leaf roller aphid. As a rule, these pests do not appear on bushes every year, but if this happens, then you have to admire not a “snow globe”, but a bare bush with the remains of leaves hanging here and there.

However, modern means plant protection allows you to avoid misfortune. If in the spring, before the buds open, you spray the bushes with a solution of nitrafen or Inta-Vir, then the viburnum will not be afraid of any pests.

Propagation by cuttings

The “snow globe” is propagated only vegetatively: with green (summer) cuttings, which are used for the shoots of the current year that are beginning to lignify. They bend well, but don't break. Severely lignified shoots are not suitable. Cuttings 4-5 cm long with 1-2 internodes are cut with a sharp knife. The cuts should be oblique, the lower one under the kidney, the upper one above it.

The cut cuttings are immediately planted in a greenhouse in a layer of humus 8-12 cm thick, covered with 3-4 cm of sand on top. Planting depth is 1.5-2 cm. Cuttings should be sprayed and watered, shaded from bright sunlight. It shouldn't be too cold in the greenhouse. Rooting begins after 2-3 weeks, and during this period frequent spraying with water is especially important.

In the second half of August, when the cuttings have developed sufficiently root system, they are transplanted to a garden bed, where before the onset of cold weather, they have time to get stronger and take root well. For the winter, it is recommended to mulch young plants with humus, sawdust or peat with a layer of 2-3 cm. After 2-3 years, the bushes can be planted in a permanent place.

Editor Plants and trees 8915

Snezhnik, snow bush - viburnum boule de neige in Russia has had such names since the eighteenth century. It was at this time that passionate gardeners grew a wide variety of forms of this ornamental shrub. Viburnum could be seen in the gardens:

• standard;
• with double flowers;
• variegated leaves.

What most attracted the eye were the bushes, whose flowers were collected in spherical, snow-white inflorescences.

Viburnum Boule de neide or snowball, is how the name of this magnificent shrub is translated from French.

Buldenezh, general description, varieties, where to plant

Viburnum boule de neige is an ornamental deciduous shrub, which is a sterile form of the common viburnum. All the flowers of this viburnum are sterile; they have neither pistils nor stamens. Enough large flowers collected in spherical inflorescences.

The shrub begins to bloom after the twentieth of May; at the beginning of flowering, the flowers are pale green, gradually opening and becoming white or pink. The flowering period lasts a whole month.

In some varieties of sterile viburnum, the snow-white inflorescences turn pink; this occurs in the forms Roseum and Pink Senation.

Important! The flowering branches of Bulldonezh are great for cutting. Bouquets of them remain fresh for a week. The plant is also suitable for forcing.

Buldenezh has five or three-lobed, pointed, green leaves; there are varieties with variegated foliage.

Many varieties of sterile viburnum reach a height of 2 m to 4 m; there are compact forms up to one and a half meters in size, but there are also dwarf plants, they are no higher than 60 cm. Viburnum boule de neige is grown:

• in bush form;
• in one trunk;
• in the form of a standard tree.

To get healthy and beautiful bushes bulldonezh you need to choose the right place to place this plant.

The optimal location is sunny plot, well protected from the wind. The plant can withstand partial shade, but at the same time loses part of its decorative effect.

Grows on any soil, but it is preferable to plant on loose, loamy and sandy loam soils. It is demanding on the amount of moisture, so in dry summers, viburnum boule de neige needs regular, abundant watering. A sufficient amount of moisture is especially important for young plants. During the rooting period of seedlings, in the first year following planting, the shrub needs regular watering.

Bulldonezh doesn't like much alkaline soils, it is optimal to plant shrubs on slightly acidic soils with a pH value from 5.5 to 6.5.

Reproduction, planting and care of viburnum boule de neige

Viburnum boule de neige in some cases can produce a small amount of berries that contain seeds, but this form of propagation is very difficult, since the seeds of Viburnum vulgaris a long period peace. And after many months of preparing seeds for sowing, seedlings do not appear immediately and grow very slowly in the first three years. Therefore it is advisable to use vegetative method breeding bulldonezh.

Important! Viburnum ordinary, sterile form, reproduces well by layering, dividing the bush, and summer green cuttings.

Green cuttings are best taken from three-year-old bushes. Cuttings approximately 10 cm long are cut from shoots cut between June and July. The upper cut is made straight, the lower cut obliquely.

Cuttings pre-soaked in a growth stimulator are placed in a box filled with peat and sand. At a temperature not lower than + 25 degrees, maintaining the humidity regime, almost all cuttings take root.

Viburnum boule do nezh, grown from cuttings, blooms in the second or third year.

Before planting viburnum seedlings in a permanent place, you need to dig up the selected area while simultaneously adding up to ten kilograms of humus per square meter. meter and integrated mineral fertilizer according to instructions.

The size of the planting hole depends on the size of the root system of the bush, but should not be less than 40 cm in depth and width. A seedling installed in landing hole, straighten the roots, cover them with soil, lightly tamp and water with at least 15 - 20 liters of water. After watering, the tree trunk circle is mulched with compost.

In subsequent years, viburnum boules until tender in early spring needs:

• sanitary pruning;
• mineral fertilizing;
• loosening the soil;
• removing weeds.

IN middle lane Young plants must be protected from frost. To do this, it is enough to cover the root zone in the fall with a layer of peat or garden soil.

If the bulldog needs formative pruning, then it can be done only after flowering has ended. Spring pruning can greatly weaken the bush, viburnum boule de neige will lose its decorative effect.

An important part of care is disease prevention and pest control. Basic preventive measure To prevent powdery mildew and spotting, buldenezh can be treated with a solution of copper or iron sulfate. This should be done in early spring, before the buds open. You can take one part of rotted manure, pour it with three parts of water and leave everything to infuse for three days. Then dilute the infusion with water in a ratio of 1 to 3. Viburnum treated with this solution receives additional resistance to disease.

Against the main pests of viburnum:

• viburnum aphid,
• viburnum leaf beetle,
• sawyer,

Spraying the solution helps a lot laundry soap carried out before and after flowering.

IN landscape design buldenezh is indispensable when decorating reservoirs, in single and group plantings, in combination with deciduous and coniferous trees. The shrub grows well suburban areas, and in populated areas, so it can also be used for urban greening.

There are two main ways of propagating viburnum "buldenezh": seed and vegetative. At the same time, gardeners should be aware that viburnum "buldenezh", which is propagated by sowing seeds, does not inherit all the qualities of its variety. It is best to choose a vegetative method, which is more feasible for implementation in own garden. To do this, you need to hill up the shoots, separate the bushes with special horizontal and vertical layering. Viburnum "buldenezh" is also well tolerated. Mother bushes are subjected to hilling once every 2-10 years in autumn and spring period time. It is required to hill up the soil around the bush to eight centimeters. The following summer, three to six young shoots usually sprout. Subsequent hilling should be carried out after they grow to about twenty to twenty-five centimeters.

After hilling, a sand mound requires constant moisture. If the care turns out to be effective, by the autumn season the shoots will “acquire” a strong root system. They must be disconnected from the bush and then planted on a certain land plot where the new plant will develop further. Viburnum "buldenezh", the reproduction of which is quite simple, may be susceptible to other effective method. it is quite possible to use lignified cuttings, which will be kept in water for three or five days, after which they should be planted in a cool place under the cover of cuttings. The latter has a certain composition, it includes humus and sand (in equal quantities). Cuttings require moisture, which can be provided by special humidifier.

For viburnum "buldenezh", propagation using this method is quite acceptable due to its simplicity and accessibility. After about thirty days, you can observe the rooting of the cuttings; by the first month of autumn, the seedlings will have already risen high enough above the ground, and they can be transplanted. The advantage of this method is the absence of a hot period during the rooting of the plant, which occurs in the first or second month of spring, so there is no need to create artificial shade.

More the hard way for viburnum "buldenezh" - propagation using green cuttings, since in this case additional stimulation of the growth of the root system will be required. As a rule, the period of root strengthening in the ground occurs precisely during the hot and dry summer period, which does not always have a beneficial effect on the result. Usually with such unfavorable conditions cuttings grow poorly, so the growth period is extended by as much as three months. At the same time, you can try to grow and root green cuttings in quantities of up to five pieces, using regular flower pot under a jar (glass) turned upside down. To prepare the substrate, sand and peat are used in equal quantities.

It should be noted that the viburnum "buldenezh", for which it was chosen as the only method, grows quite full and lush when proper organization activities to care for her. In the case of propagation by green cuttings, they must be prepared before mid-June, the leaves located at the bottom must be removed, the top two leaves must be cut by two-thirds to avoid wilting of the remaining leaves. The cuttings tied into a bundle should be placed in a special solution (heteroauxin) to a depth of three centimeters. After this, you need to wait for about 20 hours, take them out and transplant them into a pot (depth - 2 cm), then cover with a jar, place on the windowsill and constantly moisten.