Decorating the ceiling in the hallway with moldings. Moldings in the interior of the apartment. Decorating walls with moldings: color solutions

Moldings in the interior are used to decorate walls. Thanks to them, you can create various forms and design them in different styles. Such interior details can be combined with paint, wallpaper, decorative plaster, MDF parts. Moldings can be used in zoning a room or visually dividing long areas into smaller ones.

Decorating walls with wallpaper and moldings is one of the popular wall decor techniques among many designers. Molding is an overlay decor that can be used to add relief and volume to a standard interior.

Moldings are used from different materials, but polyurethane, polystyrene or plastic are more often used. The prevalence of these materials indicates ease of installation, low cost and good qualities - strength, wear resistance and lightness.

Application options for moldings:

1. White moldings on a dark wall. Moldings are used not only to decorate walls, but also window and doorways, ceiling and furniture. To decorate a room with walls of dark colors, white molding is used to make the interior more comfortable and airy. There is also a technique when the ceiling line, baseboard and molding are kept in the same tone. Therefore, you can emphasize the originality of wall paintings, paintings or other works of art.
2. Light moldings on the walls in pastel colors. This combination is appropriately used in the living room. This way you can accent paintings or family photos. You can highlight a recreation area with a plain molding, directing the light ceiling lamp or a luxurious floor lamp for the composition.
3. Colored moldings. We purchased these moldings for wall decoration Special attention this season. They are painted in a color a tone or two higher, or vice versa lower than the wall color, in the main color of the walls or in rich tones.

To create unique architectural elements on the walls, you just need to use your imagination and plan everything exactly, then the result will not keep you waiting.

Wallpaper with molding in the interior: various options

Wallpaper with molding in the interior has become very popular over the past decades and decorates the homes of many people. Such decorative elements not only decorate your walls, but can also serve practical functions in the room.

Application options for moldings and design:

• Doors and windows. By gluing the molding along the border of the window opening and painting it with paint of the same shade as the frame, you will be able to visually enlarge the window. Moldings glued around doorways will look the same way.
• Walls. Decorating with molding at the junction of different materials would be appropriate. For example, a wall 60-70 cm from the floor can be covered with wallpaper, and above it can be painted. Then the molding in this case, which will be painted to match the wallpaper, will create an additional decorating effect and will not allow the wallpaper to come off along the line where it is glued. The design can be complemented by dividing the wall with moldings at the bottom into squares and gluing a decorative molding.
• Ceiling. To increase the height of the room, you should design a double strip of moldings as ceiling molding with an interval of a couple of centimeters.

Moldings are also used to lay out various rhythmic designs on the walls or to decorate photographs, paintings, panels, and other decorative compositions.

Painting molding (video)

How to separate a combination of two types of wallpaper on a wall

How to separate the two types of wallpaper on the wall? You'll think about it. There are not many options, but one of the most popular is decorating such combinations with moldings that will give your interior an unusual and modern look.

When decorating a room, you can initially paint the walls or glue wallpaper on them, and then, after completing the initial processing, glue inserts that are cut from thick wallpaper. And for greater beauty, such inserts are proposed to be decorated with moldings. This method of decoration is suitable for rooms decorated in Baroque or classical style.

By combining several types of wallpaper and separating them with moddings, you can zone any space. Thanks to this approach, each family member can get their own corner. The main thing is to arrange the furniture correctly.

Types of wall moldings and their application

Varieties of wall moldings can be made from various building materials and must also correspond to the overall design of the facade walls. Next, let's look at what types of moldings there are.

Materials for making moldings:

1. Gypsum. Plaster stucco molding performs decorative properties. Gypsum moldings are installed on walls, ceilings, and also in the space between these surfaces. They are fastened with alabaster, which has excellent performance qualities.
2. Polyurethane. Like gypsum baguettes, they are fixed to the walls and ceiling with special acrylic glue. After installation, such molding requires additional painting.
3. Tree. In most options, these are corners, slats, and various trims that can be installed anywhere. Installation is carried out using glue and nails at the same time.
4. Metal. The most popular representatives of such products are corners for steps, aluminum thresholds and corners for tiles. They are installed in two ways - either they are installed behind facing material and are held in place by glue or secured with self-tapping screws.
5. Plastic. Among plastic products, there are mainly wall plates and corners. An exception may be plastic skirting boards.
6. Self-adhesive molding. This type can be made of different materials, but most are rubber and plastic. A representative of such products is curb tape, which is made of rubber and is used to connect the bathtub to the walls. An equally common type of self-adhesive molding is groove molding. It is installed in a groove and serves as a decorative element.

At smooth walls, opt for wooden moldings, but be prepared for high prices.

It should be noted that cheap moldings made from inexpensive types of wood are perfect for rooms lined with clapboard.

The best choice would be a polyurethane baseboard. It is low cost and easy to install. The higher the ceiling, the wider the molding should be.

Now you have learned a lot about moldings and what materials they are made from. If you handle them correctly, you can create real architectural compositions in your home. It’s never too late to start showing your imagination, and when working with moldings this is an important phenomenon.

Molding installation options

There are several options for installing moldings today. To get started, it is important to calculate the amount of all material. The dimensions of the room, measured in meters, must be divided by two and you will get the length of one element of a standard size.

There are two methods for installing skirting boards:

• Installation on wallpaper. Fastenings are made to a prepared, leveled and wallpapered wall.
• Installation on a bare wall. Before starting the process, it is necessary to prime and putty the walls. As a result, the ceiling with the baguette will look like one whole, and the cornice will hold more securely.

Craftsmen advise starting to glue the baseboard from the corners of the room, as this is the most difficult installation process. First, you should attach all the corners, and then glue straight dumbbell strips between them.

How to glue molding to wallpaper (video)

If you listen to our recommendations for working with decorative elements - moldings, then the installation process will seem quite simple for you. As a result, your room will acquire unprecedented beauty and grace thanks to decorative fillets.

Moldings for dividing wallpaper in the interior (photo)

Molding indoors on the walls. Step-by-step instructions for attaching the molding. Is it possible to glue strips onto wallpaper and how to attach wood molding.

Molding on the wall

There is a large selection of design styles for decorating a room. They combine materials that can darken or enlarge a room. The use of molding has become popular because it is suitable for all rooms.

Molding on the wall is simply glued quickly. However, there are nuances when choosing a design and choosing a material.

Molding on the wall or wallpaper in a frame: application in the interior

By using molding in a room, the room acquires originality and sophistication. You can separate the two types of wallpaper using decor. By combining and selecting the color scheme of the wallpaper, the molding will complement and enhance the wall decor.

Designers use molding to combine inappropriate decorative elements into a single picture, different kinds wallpaper and paint or other wall and ceiling decoration.

Apply decor in various rooms– kitchen, bathroom, children's room. And the ceiling height or square meters are not taken into account. It emphasizes the interior both in large rooms, highlighting special wallpaper in a frame, and in small rooms, creating a window frame or an entrance to another room.

In addition to highlighting other wallpapers, they frame a mirror, wall painting, or painting.

Correctly selected selection performs zoning functions, visual increase or reducing space.

When is it possible

You can glue molding in many cases when finishing walls and ceilings. It is used for:

• hiding defects on the surface;
• decoration of the joints of the wall and ceiling;
• smoothing surface irregularities;
• give the room an attractive look;
• zone the room;
• visually expand or reduce the space.

The use of vertical molding increases the height of the ceiling. Horizontally pasted stripes will visually expand the room.

In large rooms, wide stripes with an expressive pattern are used. This adds some historical value and adds a touch of art and aesthetics. However, such stripes small room look ridiculous.

When not to

You cannot glue molding to wallpaper. If you do this, there is no guarantee that it will last long. You also need to be very careful with the glue, because if it stains the finish, it is unlikely to be removed. Most often, glued molding needs to be painted.

If you need to glue molding to the wallpaper, then you need to choose an option from lightweight material– polystyrene foam, polystyrene.

Varieties

The molding is different in shape, textured pattern, and material. Each type has its own characteristics and characteristics. There are wide stripes with a relief pattern for large rooms, as well as thin light stripes used in the interior of small rooms to brighten and visually enlarge.

Wooden

Wood molding is valuable because of the material. Eco-friendliness and appearance make it an expensive finish. It is heavy, so the planks are secured with self-tapping screws.

Wood planks are not installed in rooms with high humidity.

However, after treating with antiseptic agents and water-repellent mixtures, the finishing is used in the corridor and on the balcony.

Polyurethane decorative overlays

Polyurethane finishing is a combination of quality and price. It is popular because it has advantages:

• strength and long service life - for about 30 years, polyurethane molding will decorate the walls and ceiling;
• ease of installation - fastening is done using glue;
• ease of cleaning;
• they are not affected by temperature changes;
• are available for sale in a wide range of colors.

Planks are used in the kitchen, bathroom, and for zoning a room.

Metal decorative strips

Decorative strips in silver, bronze and gold decorate the walls. Create an expensive beautiful interior premises. With such a finish, the room looks rich, so trims for precious metal and ordinary paper wallpaper are incompatible.

Finishing is done for mirrors, fireplaces, niches. To choose a color, you need to consult a designer.

Foam wall molding

The material is lightweight and has the following features:

• relatively low price;
• the weight of the bar is light;
• installation is carried out quickly;
• moisture resistant - can be used in bathrooms.

Finishing for those owners who want to hide wall defects and make unique design premises.

Gypsum moldings for a niche

Gypsum finishing has the following advantages:

• appearance;
• there is a possibility of restoration;
• environmental friendliness;
• does not lose its color over time;
• don't burn.

The disadvantages are the price - they are relatively expensive. AND heavy weight, which leads to complex installation.

It is not advisable to glue gypsum in damp rooms.

Plastic wall molding

Plastic baguettes are popular for several reasons:

• ease of installation;
• it is possible to paint it in the desired color;
• ease of care;
• not afraid of temperature changes and high humidity.

The disadvantage is the grainy surface.

How to make a wallpaper border with your own hands

Strips for separating wallpaper are used in the following cases:

1. Distinction between fabrics made from the same material, but with a different pattern or color.
2. In large rooms, as well as studio apartments, wallpaper is used to delineate the boundaries between the kitchen and the bedroom.

Zoning space is one of the important functions of wallpaper edging.

Materials for making decorative baguettes

Basically, the decoration is glued to the wall. In rare cases, self-tapping screws are needed.

The choice of adhesive mixture depends on the material from which the plank is made and the room in which the installation will be carried out.

1. For light planks, PVA glue or wallpaper glue is suitable.
2. Gypsum strips are attached to a gypsum solution.
3. Wood planks do not last long on glue.

Some types of adhesive for installation:

1. Loctite PL 355 – moisture-resistant adhesive, made in Germany. Glues light baseboards and moldings.
2. Decomaster 250 – moisture resistant. Designed for gluing ceiling plinths and moldings.
3. Stayer Professional is a moisture-resistant adhesive mass produced in Germany. The finishing material is glued at above-zero temperatures.

All types of glue are used for light finishing materials.

Work progress

Preparatory process. The walls must be smooth. If there are strong differences, the finish will come off over time and a gap will be visible.

• clean the walls from dust, cover with primer;
• make markings using a level or plumb line (vertically);
• if the slats are wide, you need to use self-tapping screws. To do this, holes are made in the molding.

You can paint the finish only a day after the glue has dried.

Fastening methods:

1. Sticking the finish to a bare, cleaned wall means it will have a long service life. Even when replacing wallpaper, the strips will remain in place. In some cases, it is difficult to match the wallpaper to the pattern.
2. Sticking wallpaper strips – has negative sides. It is short-lived, but there is no need to adjust the wallpaper.

Tools needed for installation:

• hacksaw for cutting planks;
• miter box for cutting trim at a certain angle;
• construction glue gun;
• spatula (in some cases);
• excess sandpaper for grouting.

Molding installation

Before starting work, you need to measure the required length of the planks and cut them. Use a miter box to cut off the corners. After this, the elements are glued in the corners according to the markings. After this, even planks are attached according to the markings. If there are gaps left after gluing, they must be covered with the same glue. All work is left for 24 hours to dry completely.

Wallpaper finishing

After the glue has dried, the planks are painted in the desired color. Use sandpaper to remove excess glue along the edges.

After the work has been done, the wallpaper is finished. To do this, you need to measure the height and width of the canvas and carefully glue it end-to-end with the strip. You need to make sure that the edge of the wallpaper is perfectly smooth and fits evenly with the finish. The canvas is not allowed to overlap the molding. It is then difficult to cut it off; uneven edges and traces of wallpaper glue will remain.

If the finishing is carried out close to the corner, you need to carefully bring the edge of the wallpaper to the molding, and then bring it to the corner.

Molding in a room: how to decorate the space with decorative skirting boards

1. White slats on a dark wall. For this purpose, finishing is used not only on the wall, but also on the ceiling-wall, framing of windows and door entrances, and furniture. This will make the room spacious and brighter.
2. Light-colored planks on cream-colored walls. In most cases pastel shades used in large rooms, halls. Light-colored strips are suitable for wall decor, framing pictures and mirrors. They give a slight touch of sophistication and sophistication.
3. Colored strips - for children's rooms, corridors. Highlighting objects on the walls, moldings are painted in a contrasting tone or tone 2 darker.

It all depends on the appearance of the room, what exactly needs to be emphasized with molding.

How to glue decorative frames in the bedroom

Gluing the frame does not differ in any special nuances from the general stage of work. The room uses light finishing colors to decorate niches and mirrors. You can make a picture if it emphasizes the interior and is a calming element.

Kitchen decoration: decor

In the kitchen, molding is used to decorate the furniture set. White trim looks beautiful against a light background. For this purpose, furniture strips of various widths are used. They are lightweight and are mounted using waterproof glue.

Ceiling plinths are also applicable in the kitchen. If wall cabinets are suspended right up to the ceiling, then the border between the cabinets and the ceiling is covered with molding.

Decorative inserts in the living room

In the living room, decor can be on the walls, ceiling, doorway. But we must remember that if finishing is in progress wooden doors, then the molding should also be wooden, and plastic window decorated with plastic.

Frame of baguettes in the hall

Frames are made from wide planks. Sometimes metal ones with gold plating are used. Wallpaper is pasted in the center of the frame, and the border between the baguettes remains white. This gives uniqueness and visually enlarges the room.

Interior decoration with molding: features of the work

When decorating an interior, there are a number of features and nuances that you need to become familiar with. This will eliminate a number of mistakes, make the appearance of the room unique, and extend its service life.

How to paste under wallpaper

Basically, the color of the molding is chosen not only so that it matches the wallpaper, but also emphasizes the design of the room.

If the wallpaper is light in color, the room is large and spacious, then light-colored planks are used.

However, when introducing dark tones into the design, for example furniture, they create a contrast - highlighting the light wallpaper with a dark finish.

When and how to glue wallpaper

Wallpaper is glued when all finishing work is completed. That is, a day after gluing the plank, it is painted in the desired tone. After drying, grout is done, removing all excess. Only after this the wallpaper is glued. They must be glued carefully butt-to-metal with the molding. You need to make sure that the edge of the canvas is smooth and does not overlap the bar. Otherwise, the appearance will be spoiled.

How to properly glue frames made of different materials

Almost all planks are glued to the base, with the exception of wood. It is secured with self-tapping screws. After the markings are made and the planks are cut according to size, the corner parts are glued first. You need to make sure that the angle is even. After to corner elements attach horizontal and vertical strips.

For strength, holes are made in the planks for self-tapping screws. After drying, the screws are removed and the holes are sealed with putty.

How to attach metal and wooden baguettes for decoration

Metal and wood slats are heavy. They are not mounted with glue. To decorate a wall or doorway, the planks are fixed with screws and dowels. The pitch between the screws is determined based on the size of the strip, as well as its width and weight.

How to glue polyurethane baseboard frames under wallpaper

Polyurethane strips are glued to the base using:

1. Liquid nails white.
2. Glue for polyurethane, for example "Oras".
3. Polymer universal glue “Dragon”.

All adhesives have good adhesion and a number of features.

In what cases is the baguette not attached to the wallpaper?

Craftsmen do not recommend attaching molding to wallpaper. However, if the wallpaper has been hung recently, it is good to stick to the surface, then the strips are attached to the canvas. But there is no guarantee that the decor will remain in place for a long time. Under its weight, it can peel off and tear the wallpaper.

Care

Molding does not require special care. Wiping off dust with a damp microfiber once a week is enough to maintain an attractive appearance.

Depending on the material from which the planks are made, chemicals may or may not be used. Let’s say that plastic can withstand a general cleaning product, but for wood a beeswax-based polish is used.

A steam generator must not be used. Under the pressure of hot steam, the bar may become deformed, change color, or fall off.

Molding makes the interior of the room more expressive, bright, visually expanding the space. There are many ideas for using molding and they all differ in their individuality. The planks are easy to install and maintain.

Useful video

Moldings in the interior for separating wallpaper and framing sections of the wall serve as additional decorative elements that give the overall composition the necessary completeness. Thanks to such finishing details, you can not only separate, but also combine different zones into a single interior space.

Moldings act as delimiters of surfaces of different appearance, color and tone, covered with wallpaper or even simply painted. In addition, with such decorative details it is quite possible to visually expand or narrow the space, “raise” or “lower” the ceiling. What moldings are made of and how such decoration is made will be discussed further in this publication.

Types of moldings and areas of their application

Decorative moldings are straight and curved, smooth and embossed strips and other three-dimensional elements that can be combined into a single composition, selecting them according to the identity of the pattern. If previously such finishing details were made mainly from gypsum, today samples made from various materials are on sale.

They are intended to enrich the decorative quality of the interior and define unique accents on the walls and ceiling of the room, to emphasize the commitment of its design to a certain style. In addition, moldings perfectly mask the joints of finishing materials that have different texture and color design.

These decorative details can have various forms of relief floral or geometric patterns of varying depths. They are often used to frame panels, paintings, mirrors, or they are used to create various compositions on ceilings.

Relief elements are also excellent for hiding some finishing defects that formed during the finishing process or even during the operation of the premises. This becomes possible because such details involuntarily focus the eye on themselves, and the main material of the cladding becomes the background for them, and, as it were, fades into the background.

Wooden wide molding strips protruding from the wall, sometimes up to 20÷30 mm, are used to prevent contact with the door handle decorative finishing surface and its damage, as well as rapid pollution. Sometimes, such bars can limit movement door leaf to the wall or to prevent abrasive contact of surface finishing with pieces of stationary or mobile furniture - armchairs, chairs, tables, etc.

In addition, the molding very often serves as a separating part for the upper and lower parts of the wall, which is often colloquially referred to as a panel.

Molding is also used to hide the uneven junction of two planes of a room, for example, a wall and a ceiling, a wall and a floor, two walls on the outside or inner corner, as it is able to correct the line. This is especially easy to do with planks made of hard material, such as wood.

Quite often, moldings used for these purposes are called floor moldings. Moldings made of wood, MDF or plastic are used as floor skirting boards. Recently, consumers are increasingly choosing synthetic material, since such skirting boards are easy to install and clean, and also have special channels for hiding various cable wiring. Moreover, the plastic intended for this purpose quite reliably imitates wood of various species.

You can very successfully use moldings to frame a wall painting or a panel made from photo wallpaper. With a creative approach, it is even possible to make such a “frame” a three-dimensional continuation of the drawing. For this purpose, molding elements such as half-columns are often used, which separate the picturesque fragments from the main wall decoration.

Moldings are also perfect for fastening around windows, as they create a visual effect of increasing their size and cover the joint between the frame and the wallpaper, acting as decorative trims. In addition, they are able to transform even modern double-glazed windows and adapt them to any interior design style.

Prices for moldings

moldings

Another area of ​​application for moldings is the ceiling surface, either evenly painted or covered with wallpaper. These finishing details frame chandeliers and other lighting, as well as various zones throughout the entire area and perimeter of the ceiling, combining stucco elements and even strips, decorated with various reliefs..

In the assortment of stores you can find wide decorative strips, as well as capitals for them, which successfully imitate columns protruding from the wall. In addition, special elements are sold, from which you can easily assemble.

Arched openings are also decorated with moldings, both their inner part and the wall areas around the arch. For this purpose, elastic parts are used.

Wide ceiling plinths can also be used to form unique shelves for decorative interior accessories, emphasizing the direction of a certain style.

Designers also do not refuse to use moldings in modern interiors, since these details can not only hide imperfections in the finishing, but also emphasize the clarity of the lines. For example, in high-tech interiors, smooth, narrow, elastic metallic strips are widely used to separate the wallpaper. different color and imitating metal rigid slats. Most often, they are equipped with an adhesive layer, temporarily covered with a protective backing - this is removed only before installing the molding on the surface of the walls and ceiling of the room, as well as on pieces of furniture.

Prices for vinyl wallpaper

vinyl wallpapers

To join floor coverings made of different materials, special moldings are used, mainly made of metal or plastic. They can be rigid or flexible, have different widths and shape, differ in the installation method.

Molding material

In the assortment of stores you can find decorative elements made from polystyrene or polyurethane, various polymers with a laminated surface, metal, wood (natural or from composites based on it), gypsum. Depending on the material of manufacture, moldings can be rigid or elastic, that is, capable of taking a given bend, which allows them to be used to decorate arches and columns.

The table below shows the main types of moldings according to the material of manufacture, indicating the specific “pros” and “cons” of each of them:

Material of manufacture	Advantages	Flaws	Characteristics
Wood	Environmental friendliness, strength, reliability, durability. Possibility of painting, ease of installation, with correct processing- permissibility of wet cleaning.	Susceptible to moisture, relatively heavy. The high price, mainly due to the fact that most moldings are made of natural wood made by hand.	Mandatory treatment with water-repellent and antiseptic solutions is required. They require additional mechanical fastening to the walls with dowels or self-tapping screws.
Gypsum	Durability (if properly secured), possibility of tinting. Gypsum is a traditional material for making interior molding.	Fragility of the material, heavy weight, difficulty in fastening. Many figured details also differ at a high price.	For installation, a special alabaster-based adhesive composition is required.
Polyurethane	Light weight, often have a laminated coating. Durability, ease of installation, long service life, affordable price, wide selection of colors, ease of DIY painting and maintenance. Some models have cable channels. Flexibility, allowing finishing of complex surfaces/	There are no significant shortcomings.	For long service life, it requires coating with special compounds.
Styrofoam	Does not absorb moisture, has a distinctly low weight. Easy to install. If desired, you can carry out the dyeing process.	Polystyrene foam is not at all resistant to mechanical damage, is short-lived, attracts dust, and is difficult to clean. Insufficient elasticity. Extremely low heat resistance, highest toxicity in case of fire.	Not all adhesives are suitable for installation - many of them dissolve the material or cause its deformation
Polystyrene	Moisture resistance, light weight, ease of installation, affordable price. Possibility of painting the surface yourself.	Instability to mechanical damage, low bending strength, inelasticity.	When cut, the material has an even cut and does not crumble. The attitude towards adhesives is the same as for polystyrene foam.
Metal	Moisture resistance of the material, ease of installation and maintenance, low weight. Original appearance with polished surface.	Only suitable for modern interiors– in “classic” types of finishing it becomes inappropriate.	Fixed with glue and mechanical fasteners.
Plastic	Waterproof, lightweight material. Easy to maintain and install. Relatively low price.	It is not particularly durable - yellowing or clouding processes are inevitable. Inability to change independently exterior finishing surface of the molding at your discretion. They are used for narrowly targeted purposes - usually with plastic finishing panels.	Fixed with glue, staples or other mechanical fasteners.

Moldings in various interior styles

Moldings for finishing certain surfaces of residential premises are used in a wide variety of interior design styles.

Most relief strips and shaped decorative elements are suitable for almost all interior styles, but for some of them you have to choose a specific version of volumetric patterns.

"Baroque"

The Baroque style is replete with moldings and decorative details with embossed plant patterns. One could even argue that it is they who create the general mood of such interior design.

Previously, these decorating the ceiling and walls were made of plaster, and it can safely be called traditional material for their manufacture. Today, in specialized stores you can choose moldings with various volumetric reliefs made from lighter materials, which are much simpler and more convenient to install. In addition, they can be easily tinted in any color.

In this style, light colors predominate, so the surfaces are decorated with white or gilded “stucco”.

For registration ceiling surface a whole complex of moldings is used, consisting of straight strips and elements having various shapes and relief patterns. In the Baroque style, these details are placed on the ceiling symmetrically relative to the center of the surface, which, in turn, is decorated with a decorative rosette for a chandelier.

On the walls, with the help of molding strips, unique panels of different perimeter are formed, which are painted or covered with wallpaper of the same or different color from the main surface, but in good harmony with the overall background. In this case, moldings serve as framing elements that help maintain the interior style. The furniture should also match the design of the walls, flooring, as well as draperies - curtains on windows or niches.

"Provence"

A popular style for decorating rooms in modern houses and apartments is “Provence”. Based on the warm motifs of southern France, this style provides indoor cozy atmosphere promoting rest and relaxation.

It is very convenient that this style allows the use of creative improvisation in the design, since it is not particularly limited in the use of certain elements. In the Provence style, simple-shaped moldings with simple geometric reliefs are used, and painted in colors that are in harmony with the basic tones of the room design. In the decoration of this style, framing elements can be fixed at the junctions of the surfaces of walls and floors, as well as walls and ceilings - this is the same case when they are also called ceiling plinths.

To decorate the main area of ​​walls in the Provence style, moldings are used less frequently. However, sometimes they still use simple options strips for framing mirrors, window and door openings, as well as for setting the height limit of the lower, “panel” part of the walls

Another technique used in this style solution is a combination of moldings of different widths, shapes, and colors. It would be appropriate in the Provence style and decorative fireplace, but only assembled from molding elements of simple relief shape.

Ceiling rosettes for chandeliers in the Provence style are distinguished by their simplicity of relief and do not have complex floral or geometric volumetric patterns.

Classic style

Another favorite option for decorating apartments, especially those located in old houses with arched windows and high ceilings - this is a classic style. Thanks to the presence of similar architectural forms, this direction suggests itself for decorating such rooms. In some cases, owners of newly built private houses deliberately choose architectural project, made in this style, and then, accordingly, decorate the interiors in it.

Prices for wallpaper for painting

wallpaper for painting

Typically, furniture used in classic decoration is made of natural dark or tinted wood and has carved frames of various configurations. Using the same principle, it is advisable to select the reliefs of moldings used for finishing walls, arches of windows and doors.

Scandinavian style

The Scandinavian version of the design of living rooms is also not forgotten in interior design, and it is used in various variations. Basically, this approach uses modern furniture accessories with strict lines and geometric shapes, but they are smoothed out by numerous pillows, soft blankets laid on sofas and small floor carpets with piles of different lengths.

Moldings in this style of room decoration are suitable for framing arches, windows, ceilings and floors. Here, such decorative elements are not the main details - they are used as auxiliary ones and emphasizing the evenness of the walls and the neatness of the interior. If the design is done in light colors, then white moldings are matched to it. If other shades are used for painting or gluing surfaces, a light frame can also be chosen, or the moldings can be painted in tones close to the main colors of the overall design of the room.

Mediterranean style

The Mediterranean style of room design assumes the presence wide doors or windows big size, behind which a spatial perspective opens with the surface of the sea. It is clear that not all apartments have windows or balconies overlooking the sea, lake or simply a beautiful corner of exotic nature. Therefore, when recreating this style, they often use appropriate painting on plaster or high-quality photo wallpaper.

In this interior design style of rooms, moldings are used in all sorts of ways - this is a clear highlighting of the panel part on the walls, framing arches and doorways, the ceiling, as well as the obligatory section of the wall with paintings or photo wallpaper. Molding strips are fixed around the wall images and columns or semi-columns are installed as a continuation of the arcade pattern, simulating an exit to a balcony or street. This design of the room visually expands its space due to the perspective of the image and the installation of external decorative elements next to it.

If the room already has a large window, completely glass door, or a picturesque image is applied to the wall, but I would like to complement the interior with elements that enhance the direction of the style design; you can use appropriate furniture, accessories and finishing materials. For example, narrow small sofas with straight backs are suitable for this style, the role of which can be played by a wall decorated with moldings, near which this seating area is installed. Natural mats are used as carpets, and curtain draperies and furniture covers are made from linen or cotton fabrics.

Mediterranean style involves light or pastel colors, as well as freedom and lightness of space. It would be useful to place a flowerpot with some exotic plant in the room.

Romantic style

The romantic style is great for decorating a bedroom, as it uses pastel, non-aggressive colors that will have a positive effect on a person’s psyche and his mood - pale pink, light green, blue, etc.

These shades will go well with the white color of the moldings framing the walls and furniture accessories. In this style, it is acceptable to use molding strips of any shape and width, emphasizing the lines of the interior elements. Other decorative elements are also acceptable, but without much “pretentiousness”. They are mounted on walls, ceilings, built-in cabinets, niches and arches, and in some cases it would be useful to install one or two columns or semi-columns in the interior.

The romantic direction can also be used in decorating the dining room. However, here you need to remember that if the room is very small, then you should not use too many moldings installed in the form of frames and panels on the walls, since such details will visually make the room smaller. If the ceiling is not too high, then it is not advisable to fix it at the junction of the walls and ceiling, but it is better to place it on the ceiling surface itself. If the ceiling is too high, it is recommended to fix the molding on the wall, below the line where the two planes meet - this technique will make the room more comfortable and compact.

English style

IN english style The interior uses moldings with clear geometric reliefs. Moreover, they can be used on any part of the wall or built-in piece of furniture, sometimes even completely covering their surface.

A mandatory attribute of the English style is a real fireplace. Since it is often impossible to install such luxury in an apartment, it is replaced with a decorative or electrical option. But the main thing for decorating a hearth is one constructed from one or another type of molding with a simple relief.

For the English style, numerous built-in open cabinets filled with decorative accessories. The mantelpiece is most often decorated with a table clock and a pair of candlesticks.

The English version of the design does not involve numerous ceiling decorative elements, except for the molding-plinth framing its perimeter. However, sometimes a few details are still fixed on the ceiling surface in the corners - corners that should have clear, multi-stage relief shapes.

American style

The American style has also become popular for decorating Russian houses, as practicality and lack of frills prevail in it. The decorative effect of the room is achieved through the correct selection of materials that are in harmony with each other in color and shape.

In this style, moldings are used, so to speak, very “dosed”, that is, only in those areas where they are really needed. Usually this is a division of the wall into the upper decorative space and a lower, darker panel part, approximately at the level of the door handle. Floor ones almost always have a height of at least 150 mm, which helps to avoid damage to the panel material. Wall or ceiling molding helps to visually reduce or increase the height of the ceiling, depending on their fastening and the degree of need to create such an effect.

IN American style there are no columns on the walls, and on the ceiling there is “stucco” with complex floral patterns. However, just like in the English style, the living room can be decorated with decorative or functional ones.

So, in any popular interior style there is a place to place molding. However, taking into account style directions, strictly defined configurations of these decorative elements, their number and areas of installation are selected. There should be moderation in everything: excessive use of moldings or details that do not match the style is an even less desirable solution than their complete absence in the interior.

At the end of the publication, there is an interesting video collection showing many options for using moldings in interior decoration of various styles.

Video: using moldings for interior decoration

Plain and empty walls without unnecessary pictorial elements are a universal design option, but for creative individuals such an interior is not enough. Then wall moldings - overhead decorative panels - come to the rescue.

The variety of shapes, widths, lengths, and materials makes this decoration popular and modern. The main thing is to know where, when and how to use it.

Briefly about the element

Wall decoration with moldings includes frames, baseboards, grooved strips, panels and stucco. Their functions include not only aesthetic, but also other aspects:

• Masking wall surface defects, flaws and irregularities;
• Dividing space into separate sections;
• Separating some wallpaper from others;
• Decoration of window and door openings, niches and arches;
• Creating “fake” windows;
• Use as skirting boards to hide knocks between the wall and the floor or ceiling.

Some decorators expand the scope of use of frames and decorate furniture with them, design sockets and switches in order to fully create a conservative atmosphere of true classicism.

Types of decor

Depending on the style solution, ceiling heights, certain decorative moldings are selected. Thus, there are convex, concave and flat models.

Convex panels with stucco molding, protruding ornaments and clearly defined frames are more often selected for classical and historical interiors. Volume is also added through spraying and overlay elements.

Simple straight lines are more suitable for minimalist designs, with preference given to neutral shades or those stylized as natural wood.

Concave models are a simple die with convex edges, creating the illusion of a recessed space. They are considered universal and suitable for decorating any room.

• Panels are also divided according to the material of manufacture, which can be:
• Plastic (the most budget option, has a wide range of colors and low strength);
• Foam plastic (lightness and high degree wear);
• Wood (noble natural texture, distinguished by high quality and price);
• Marble or other stone (expensive, durable material that requires special care and reliable fastening);
• Polystyrene (resistant to sudden changes in humidity and temperature);
• Gypsum, drywall (only in white or color Ivory, durable and inexpensive);
• Polyurethane (environmentally friendly material does not absorb odor and moisture, is resistant to changes and painting, elastic and practically impossible to deform).

Each material has its own advantages and disadvantages, which should be discussed in detail with sales consultants or decorators. The latter will also suggest some useful tricks: in wooden panels you can cut grooves for electrical wiring and apply original carvings or paintings.

Design ideas

A quick transformation of the existing interior will be helped by a small decoration of surfaces, openings, walls and furniture with moldings. So, interior doors or the arches can be visually expanded by running strips around the perimeter and painting them in its corresponding color.

For visual magnification ceiling height and, accordingly, square meters For a small apartment, the following method is used: two parallel straight lines with an interval of 3-5 cm are glued to the wall under the ceiling.

On the walls, the use of various zoning with decorative elements is the most widespread and non-standard. For example, they separate the lower trim from the upper wallpaper, highlight special “fake” windows, or frame photographs, paintings, murals, posters and other wall compositions.

Also, in addition to decoration, moldings are also used as multifunctional items: shoe holders, shelves for books and magazines, stands for photographs and accessories, a platform for an alarm clock or a frame for a TV panel.

In any case, care must be taken to ensure that the decor fits harmoniously into the interior and that it is securely attached to the base.

Excellent and unusual solution there will be a transformation old furniture, masking of some surface defects and facades protection sharp corners and fastening the upholstery.

Mounting methods

Installation of most panels is simple and does not require special skill or effort. The main thing is that the surface is smooth, clean and dry.

The method of attaching the molding to the wall directly depends on the material of manufacture: screwing it with self-tapping screws or gluing it with a special solution. Relevant information is obtained at the purchase stage.

Some models are self-adhesive and have a special layer covered with a protective film. During repairs, the protection is removed and the panel is applied to the desired location.

If an adhesive base is not provided, then for gypsum, polyurethane, foam, plastic and polystyrene models, an additional polyurethane gel is purchased, which securely fixes and does not leave marks on the surface. Heavy wooden panels require more reliable fastening: self-tapping screws, nails, clamps.

Design secrets

Photos of moldings figuratively located on the walls attract attention, encouraging you to repeat the idea in your interior. But only if certain rules are followed, you can achieve a clear drawing and an ideal final result:

• An intricate pattern requires preliminary drawing of hints on the surface with a construction pencil;
• Moldings are painted before pasting;
• Snow-white panels will visually increase the space;
• Frames and baseboards must be supported in several places in the room at once;
• In spacious rooms, massive, wide and convex models are appropriate, while in small areas only narrow and straight options can be used.

Moldings on the walls can add zest and a new atmosphere to the interior, as well as hide imperfections in surfaces and visually expand square meters.

With their help, you can display the design on new level, zone the space, add sophistication and grace to the room, turning boring plain walls into a solid decorative composition.

Photos of wall moldings

For creating luxury interiors Until recently, plaster stucco, marble or expensive wood were installed. Today, polyurethane is used to decorate houses. moldings on the walls in the interior. Photo demonstrate the variety of decoration options and the effectiveness of such finishing.

Molding is a flat or three-dimensional decorative element that is attached to walls or ceilings. This type of decoration is used to decorate the living room, bedroom, nursery, hallway and even the kitchen.

This detail is a rather narrow insert with a figured relief on the front side. It is used for sealing joints, cracks and irregularities in corners and on planes. Also applies this type decor for connecting different materials.

Moldings may have different shapes, but usually this is the name for a narrow rectangular piece with a variety of patterns applied to the front side.

Varieties

The interior die has various functional purposes. Decorators select moldings for:

• walls;
• doors;
• windows;
• streams;
• gender;
• decorative panels;
• corners

Types of wall moldings

To decorate the space adjacent to windows and doors, a special type of lath is used, which is also called platbands. To create a beautiful transition to the ceiling you will need a special ceiling plinth, which also applies to moldings. The joints of vertical and horizontal surfaces in the room are made using floor and ceiling plinths.

For vertical surfaces in the room, special wall moldings are produced that emphasize the pattern of the front surface of the background. With their help, you can create relief patterns, giving the room a respectable appearance. There are products for creating spectacular panels that can transform any interior. They are selected based on the properties of the exterior wall finishing.

To seal corners, specially shaped corners and slats are used to close vertical joints in the corners. Typically, a decorator uses a set of different moldings to create an attractive appearance for the vertical and horizontal surfaces in the room.

Materials and installation features

Stucco molding for decorating houses a hundred years ago was made from gypsum. This molding is attached to the ceiling using alabaster. The technology for the production and installation of gypsum stucco is labor-intensive and expensive. Fastening plaster decor requires vocational training. If plaster molding falls off the wall, it will most likely collapse and you will have to buy a new one. This type of decoration is not safe if installed unprofessionally, since if it falls, the heavy weight can injure a person if it hits it.

Today, polyurethane products are used to create home decoration in various styles. They are lighter, easier to attach, environmentally friendly and safe. Fastening is carried out using a safe acrylic glue. The product is highly decorative, since after gluing it can be painted in any color that suits the overall style of the home.

Wood molding has a rigid structure and requires professional knowledge and experience during installation. A wooden plaque can be attached in different areas of the room. To do this, thin nails and wood glue are used, which makes it possible to strengthen the fastening of the rigid wooden structure and give it the required shape.

The metal die has a highly specialized purpose. Most often, such aluminum molding is used to decorate thresholds, steps of stairs, wall surfaces, finished tiles– wherever corners and joints will be subject to heavy mechanical stress. Fastening metal corners and slats are made with self-tapping screws or using glue. In this case, such cladding must necessarily extend beyond the edge of the exterior trim.

Door finishing example

Plastic products have a rigid structure and are installed in corners. There is a type of plastic skirting board that is specifically designed to seal the joint with the floor. Fasteners of this design are made using glue. Floor plastic skirting board secured with special system provided locks at the junctions of its individual elements.

There are also self-adhesive models, which are classified as a separate group of interior elements. They are made from plastic and foam rubber. Adhesive-based molding is used to cover the joints. An example of such decoration is a border strip, which is installed at the junction between the bathtub and the tiled cladding.

Polyurethane material: advantages

Today, the most common synthetic compounds from which moldings are made are polyurethane, polysorbitol and plastic. Thanks to the characteristics of modern materials, decorative slats can be rigid or flexible.

Unlike wooden, plaster or marble products, synthetic analogues are more flexible, easier to attach and more durable. Flexible slats are considered universal, they can be easily glued to any place. They can be straight or curved. Curved shapes are used to create a fold in the interior.

Polyurethane slats are lightweight and attractive appearance and ease of installation. They are inexpensive, so everyone can purchase polyurethane decor to decorate their home.

Polyurethane has long been used for the production of interior elements. This is a foamed plastic that is lightweight and has excellent ductility. Thanks to these characteristics, it began to displace gypsum stucco from residential and commercial settings.

Polyurethane parts have many advantages over other types of similar decoration. They:

• durable;
• plastic;
• easy to install;
• moisture resistant;
• are resistant to external influences;
• are inexpensive.

On a note!Polyurethane room decoration is highly resistant to aggressive environmental influences. It is not afraid of moisture and ultraviolet rays. This molding is environmentally friendly and retains its attractive appearance for a long time.

Installation nuances

With a wide variety of types of interior products, there are common fastening rules for all. A product made of any material should be glued or screwed. At glue method it is necessary to select the correct compositions, focusing on the manufacturer’s recommendations.

How to choose glue

For the job you will need to select suitable adhesive compositions. The choice directly depends on the chemical structure of the die itself and the place to which it is attached. Silicone adhesive is usually used for interior wall decorations. This is a universal composition that can be used when installing plastic, rubber, metal, and wood.

Please remember!Using unsuitable adhesives may damage the front surfaces and the decorative strips themselves. Therefore, liquid nails should always be selected for specific surfaces.

Silicone adhesive is suitable for fastening on glossy surfaces. If you need to make fasteners on a porous structure, it is better to use liquid nails. They provide stronger adhesion and guarantee a durable installation. decorative element. For high-quality connection of shiny and smooth surfaces, “Moment” or “Second” is suitable, which provides instant setting and does not allow the die to move out.

Cutting corners and installation technologies

For any types of such wall or ceiling slats, the corners at the joints are trimmed. It depends on its quality external design decor. Therefore, it is necessary to make an even and precise cut of the edge using special cutting tools.

It is also important to make even fastening of the decor, otherwise the effect high-quality finishing will be lost. In order for the rigid material to lay flat, you need to make preliminary markings in the places where it will be glued. To carry out precise cutting, you need to choose high-quality cutting tools. You will need to use a ruler or tape measure to take measurements.

Important! When installing molding trim, you should remember that it depends on the type of molding. There are decorative details that are mounted on the walls and ceilings even before finishing. These include ceiling moldings, stucco moldings, wall moldings made of polyurethane or polystyrene foam, which then need to be painted.

Self-adhesive borders and strips are always glued to dry and clean joints. It is necessary to remove the protective tape from such a molding only during gluing, otherwise it will lie unevenly.

With the help of decorative dies, they zone the space of the walls, create compositions in rooms of different functional purpose. Correct selection of elements and their subsequent installation without violating technological recommendations will hide architectural flaws and uneven finishes.
Usage decorative molding made from modern materials will allow you to transform your home with minimal investment. Polyurethane parts are easy to glue, and they cost less than wood and plaster. Gluing the details of modern furnishings can be done by a person who does not have the qualifications of a finisher or designer.