Fast 2804 modem. Universal router from Rostelecom. Removing unnecessary factory connections

In the interface that opens, select the "Advanced Settings" tab and click the "Add" button.

The connection creation window will open. Here we specify the VPI and VCI for the Internet connection. In our area it is 0/33. We do not change anything else, click the "Apply / Save" button.
Now let's add a connection for IPTV. Click the "Add" button again:

We set VPI and VCI to 0/50 (there may be others in your Rostelecom branch), click the "Apply / Save" button. Thus, we have created 2 second level interfaces for ADSL.

Now we need to create WAN services. To do this, select the "Advanced settings" item in the menu on the left, select the "WAN service" tab in it. We delete the prescribed interfaces by first ticking the "Delete" column.

Please note that the remote services had the eth3.2 interface listed in the Interface column. This means that this router was configured by default for FTTB. This connection must also be removed. To do this, in the menu on the left, select the item Additional settings >>> Level 2 interface, tab ETH interface and remove the eth3 interface there.

Setting up PPPoE for Rostelecom

We return to the "WAN service" tab. Click the "Add" button.

Select from the drop-down tab "atm0 / (0_0_33)" for the Internet and click the "Next" button.

Depending on the type of connection, select either "PPPoE" or "Bridging". In the first case, the modem will be configured in router mode, it will itself connect to the Internet and distribute it to connected devices. It is best to configure the router in router mode. It is not advisable to set up an Internet connection in bridge mode. We press the "Next" button.

We hammer in the login and password from the card, click the "Next" button.
In the following windows, do not change anything, click "Next". The only thing worth paying attention to is that if the usb0 interface instead of ppp1 is in the columns on the left, it will need to be moved to the right column, and the ppp1 interface, respectively, to the left. At the end, click "Apply/Save".
We get the following table in the WAN service section:

Digital television IPTV for Rostelecom.

In the WAN service section, click the "Add" button to create an IPTV configuration:

Select from the drop-down tab "atm1 / (0_0_50)" and click the "Next" button.

It remains only to group the ports for the correct operation of the two services.

grouping of ports.

Go to the "Interface grouping" tab, delete the default IPTV group by checking the Delete box.

Then click "Add". The following window will open:

In the "Group Name" field, write a name, say TV, select the previously created connection to IPTV on the right and click on the arrow to move it to the left side. In the same way below, we bind ports to this connection, let it be port 4 on the router - “eth3”. Click the Apply/Save button.
It should turn out like this.

Instructions for configuring the router: (Doc file)

To update the firmware, you need to go to the router menu:

Instructions for configuring the SagemCom 2804 router (WHITE) (“->”-arrow means “click”).
First, open a browser and type 192.168.1.1 in the address bar -> "login".

1. WE DO A RESET OF ROUTER SETTINGS.
1.1 -> "MANAGEMENT" -> "SETTINGS" -> "RESET" -> "RESTORE DEFAULT SETTINGS".
2. DELETE THE STANDARD SETTINGS.
2.1 -> "ADDITIONAL SETTINGS" -> "WAN SERVICE" -> SELECT EVERYTHING IN THE TABLE WITH A CHECK -> "DELETE".
2.2 -> "2nd LEVEL INTERFACE" -> SELECT EVERYTHING IN THE TABLE WITH A CHECK -> "DELETE".
2.3 -> "ETH-INTERFACE", IF CREATED, DO NOT DELETE.
3. CREATE WAN SERVICE SETTINGS.
3.1 -> "WAN SERVICE" -> "ADD" -> "NEXT" -> "NEXT".
3.2 Tick \u200b\u200bON -> "PPP REPEAT AT AUTHENTICATION ERROR", AND IF THERE IS THE SAME BELOW -> "ENABLE NAT", AND -> "ENABLE FIREWALL".
3.3 ENTER THE LOGIN AND PASSWORD -> "NEXT", "PPP" - TRANSFER TO THE LEFT, "USB" - TRANSFER TO THE RIGHT, -> "NEXT", "USB" - TRANSFER TO THE RIGHT, "PPP" - TRANSFER TO THE LEFT, -> "NEXT" , -> APPLY AND SAVE.
4. IN WAN-SERVICE CREATE SETTINGS FOR TV.
4.1 -> "ADD" -> "NEXT", SELECT THE LOWEST IN THE LINE -> "BRIGING" -> "APPLY AND SAVE".
5. WE CREATE A GROUP FOR "TV".
5.1 -> "GROUPING OF INTERFACES", -> "ADD", GROUP NAME "TV", "BR_ETH/ETH0.2" SHIFTING TO THE LEFT, "ETH3/ETH3,ETH2" SHIFTING TO THE LEFT -> "APPLY AND SAVE".
READY!!!

ATTENTION!!! After setting up the modem, it is recommended to change the standard login / password for access to the web interface.

Open your browser and type 192.168.1.1 in the address bar. To enter the settings, use the login admin, password admin.

The router configuration settings for connecting to the Internet consists of 3 steps:
1. Deleting the previous configuration.
2. Setting up the physical interface (configuring the interface of the 2nd level, indicating which LAN port will be used as the WAN port for connecting the cable FTTB).
3. Configuring the logical WAN interface to work with the physical interface specified in paragraph 2 (configuring the WAN interface with setting the parameters for connecting to the Internet).

It is necessary to delete all previously created logical interfaces set by default in the configuration and create a new layer 2 interface (ETH WAN) to connect to the Internet. To do this, go to the menu item Additional settings -> WAN service, set the checkboxes in the Delete column, in each line with interfaces, and click the "Delete" button.
Next, you need to configure a new physical interface to connect to the Internet. To do this, enter the menu item Advanced settings -> Layer 2 interface -> ETH interface and click the "Add" button.

Parameter selection window will appear ETH WAN in which you need to select the ETH port and connection mode. Since port number 4 on the router will be used as the WAN port for connecting to the Internet, you must select as the ETH port eth3/eth3.

If there is an option VLAN MUX(Several connections through one vlan), then you need to activate it. To save the settings, click the Apply/Save button. Then the interface will be created

After creation ETH layer 2 interface must be created WAN service. To do this, enter the menu item Advanced settings -> WAN service and click the "Add" button

After that, the WAN service interface configuration window will appear in which the layer 2 interface created in the previous step should be selected (in our case it is eth3 / eth3)

On the next page, the WAN service type should be selected − PPP over Ethernet. Leave the WAN service description field unchanged.

In the PPP username field, the Client enters the login, and in the PPP password field, the password given at the conclusion of the contract
In the “Routing-Default Gateway” window, the selected default gateway interface should be the created WAN interface ppp1.1

In the window for selecting the interface of the DNS server, ppp1.1 should also be on the left side

To apply the settings, click “Apply/Save”

Setting up IP TV

To connect the STB set-top box, you need to configure the corresponding virtual interface (WAN service) on the router. By default, the cable from the STB set-top box should be connected to LAN #1 of the router). If you need to connect several set-top boxes, then for stable and correct operation of the service, you need to configure the grouping of interfaces
In the menu on the left Advanced settings -> Layer 2 interface -> WAN service and click the "Add" button

The selected interface must be set to eth3/eth3. In the WAN service configuration selection window, you must select the type of WAN service - Bridging. The description of the service can be left unchanged. To apply the settings, click "Apply/Save".

Grouping interfaces

Interface grouping is performed in order to separate video traffic from other types of traffic in the client's local network. And also in order for the STB set-top box to dynamically receive an IP address from the provider's network, and not from the DHCP server of your router.
To group interfaces, go to the menu on the left Additional settings -> Grouping interfaces. To create, click the "Add" button. We set the parameters as indicated in the screenshot

The router is now configured to watch IP-TV. In the configuration above, the cable from the STB must be connected to LAN1 of the router. If the Client has 2 STBs, then two ports eth0 and eth1 must be combined into an IP-TV group. Accordingly, set-top boxes are connected to the LAN1 and LAN2 ports.

Became fixed: 4 519

1. When connecting to the Internet via an ADSL telephone line, the cable provided by the provider should be connected to the splitter input (LINE), and the telephone set and router should be connected to its PHONE and MODEM outputs, respectively.

Let's consider manual configuration router. For automatic configuration, you need to run the Configuration Wizard and follow Next.

In the address bar of any Internet browser installed on your computer, enter the combination of numbers 192.168.1.1 (the static ip address of the device indicated on the service label on the back of the 2804) and press the "Enter" key.
Here, in the authorization window, enter the login - "admin", the password - "admin" and click "Login"
A window will open in front of you, as shown in the screenshot.

It is necessary to remove unnecessary settings.
Go to the "Network" → "WAN" tab.
Select and delete

Creating an IP-TV connection over an ADSL line

The IP address of the Sagemcom 2804 v7 rev.3 WiFi router in the local network is the same as in previous versions - 192.168.1.1. By default, login and password admin/admin are used for access.

First, enter a new login password. then we switch the WAN interface type from ADSL to Ethernet. Click on "Next", after which the device will go to reboot. This will take a couple of minutes, after which we go back to the web configurator and go to Manual configuration.

After changing the operating mode of the device, the first Ethernet port (LAN1) automatically switches to the WAN port mode and it will be necessary to connect the provider's cable entering the apartment into it.

We also go to the “Network” -> “WAN” section and delete unnecessary connections.

In the end, you need to deal with port grouping in the "Advanced"-> "Interface grouping" section:

Click on the Apply button. Digital TV set.

Setting up a wireless WiFi network Go to the "Network" -> "WLAN" -> "Basic" section:

In the "Standard" list, set "2.4 GHz (B + G + N)", Operating mode - "AP". In the "SSID" field - the name of the network, an automatic name will appear, written on the back of the router. You can also enter any network name you want. Below, the parameter "Channel number" must be set to "Auto". Click on the "Apply" button and go to the "Security" subsection

Router Rostelecom Sagemcom [email protected] 2804 v7 is a branded hardware and software product designed to connect client equipment and mobile devices to the Internet at speeds up to 300 Mb/s. The router is capable of receiving an IPTV signal after appropriate configuration. It is optimized by the manufacturer to work in the network of the largest domestic telecommunications service provider Rostelecom. The device supports ADSL (telephone cable) and Ethernet (four- or eight-core twisted-pair) connections.

The router belongs to the budget series of Rostelecom modems. It is distinguished by high build quality, ergonomic shape, sufficient functional parameters and good technical characteristics. On the upper plane of the case is a USB-3.0 connector and two keys to turn off the wireless connection and activate WPS technology.

In appearance, the device resembles the popular dlink dir 300 model. An information label, which is glued to the bottom surface of the device, tells the SSID and password to enter the router's web interface.

The main characteristics of the router

In addition to the standard network traffic distribution and IPTV signal reception, the model [email protected] 2804 v7 from Sagemcom supports:

• creation of a backup broadband channel;
• the ability to use the device as a print server;
• the ability to perform the functions of a network drive (this will require connecting an HDD or SSD to a router via a universal USB bus, which will turn it into a miniature web server with simultaneous access to data from several client devices).

The router is compatible with the 802.11b/g/n WFA specification and provides full-fledged work with 3G modems. There is a built-in DLNA server. The performance of the central processor is enough to simultaneously process requests from multiple client devices to provide quick access to multimedia content.

You can watch IPTV in FHD quality (1080p). Switching to the Internet is carried out by connecting a telephone cable to the input ADSL connector (asymmetric digital subscriber line) or a twisted pair with an RJ-45 connector to a high-speed WAN port. The device consumes less than 10 W of electricity and has dimensions of 185x110x30 mm (LxWxH).

Delivery list

The standard delivery package of the router includes:

1. The device itself.
2. Power adapter 12 V.
3. Telephone cable with RJ-11 connector.
4. Quick User Guide.
5. Splitter (signal splitter for telephone and high-frequency modem).
6. CD-ROM with proprietary utility - automatic network configuration wizard.

In the box with the router, you can also find a warranty card that has a validity period of 1 year.

Preparing the Sajemcom router

First, you need to supply power to the Rostelecom Sagemcom router. Before setting the router parameters, it is necessary to correctly connect the network card of the computer (discrete or integrated into the system board) with the LAN connector of the device, highlighted in yellow, with a patch cable. In this case, a characteristic click should be heard.

If the connection is made via a telephone cable, then the plug is inserted into the ADSL port. When using Ethernet technology, the connection is made through the WAN connector. If the router is connected via twisted pair, then the LED indicator will turn green, but there will be no access to the Internet without setting access parameters.

Authorization in the web interface

To enter the control panel, you need to launch a browser on your computer and enter the device's IP address: 192.168.1.1. These are the factory default settings. An authorization window will appear. It enters the password admin. The username is the same. The login/password pair can be changed in the security settings of the web interface.

Router Shell Update

The firmware is updated using the CD included in the package. This will ensure the correct operation of the device and support for all functions. If the operating system is configured to automatically launch programs from removable media, then the welcome window of the Rostelecom Hardware Configuration Wizard will immediately appear on the screen. Otherwise, you need to activate the utility manually by double-clicking on the executable file. Set the marker in the dialog box that opens to "Update the universal router" and click "Next".

Removing unnecessary factory connections

The router by default creates initial unhealthy connections. They must be removed, which will avoid errors in the operation of the device. To do this, the following step-by-step algorithm of actions is performed:

The window will then refresh again. We press the last line of the menu with the name "ETH Interface". The page will reload again and the factory configuration will disappear.

Automatic installation of the Sajemcom 2804 router using the hardware setup wizard

In the main window of the configuration wizard, select the item "Full configuration of the universal router" and click the "Next" button. It remains only to wait for the end of the procedure, during which the following operations are carried out:

1. The optimal router configuration is selected.
2. The required PPPoE connection parameters are set.
3. A separate channel for 3G is reserved.
4. The availability of the provider's equipment and the compatibility of the subscriber device with it are diagnosed.
5. VCI and VPI values ​​are set.

When the configuration of the Rostelecom Sagemcom router is completed, click the "Apply" button and reboot the equipment.

How to set up a fast 2804 v7 router manually

The router and network adapter of the computer can be configured independently. Such a need arises in the absence of an installation disk. This method is also suitable for experienced users who prefer to do everything by hand. Configuring adapter settings on Windows 10 is similar to this procedure in other OS versions developed by Microsoft.

The Sajemcom fast 2804 router supports several options for connecting to the Internet:

1. ADSL.
2. High-speed fiber optic cable using FTTB technology.
3. Building a home wireless network.
4. Work in print server mode.

The functionality of the model includes receiving an IPTV signal, which can be configured manually with an individual setting of the desired parameters.

Ethernet connection

To configure an Ethernet connection in the web interface of the router, you need to click on "Advanced settings", go to the ETH service, select the item "eth0/eth0" and set its value to "VLAN/MUX". When exiting, save the changes by clicking on the appropriate button at the bottom of the window. We go to the "WAN service", click "Add" and select the "eth0 / eth0" parameter in the list that appears.

On the next page, we assign the value "-1" to the PPPoE connection by writing it in the two fields below. We press "Next". Here we enter the login and password from the agreement with the provider. We mark "Enable NAT" and "Firewall". We skip the following pages by clicking the “Next” button everywhere. When you exit the setup wizard, save your changes.

Wireless network in the router

The model supports all existing wireless standards and allows you to create multiple guest connections. Wi-Fi settings are set in the "WLAN" section of the advanced settings of the router's control panel. Here you can enable IGMP - a special multicast protocol. To activate the Wi-Fi module, in the first section of the WLAN settings menu, check the box "Enable wireless communication".

How to set up with an ADSL connection

An Internet connection using ADSL technology is established in the "ATM PVC Interface" section of the WAN service. Here is the automatically created connection PVC 8/32. It must be removed by first ticking it. By pressing the "Add" button, we create our own connection and specify the VPI / VCI parameter - "0/33" by entering it in the field located next to it. Set the DSL Link to "EoA" and the encapsulation to LLC. After completing the basic settings, restart the router.

To set the necessary parameters of the 3G modem, you need to connect it to the router via a USB port. The setup algorithm is as follows:

1. In the router control panel, select the "3G Configuration" section.
2. Set the marker to "Enable 3G reservation".
3. We save the changes made.

With these settings, the device will turn on 3G if an ADSL or Ethernet connection is not available. IPTV does not function in this mode.

Setting up a router to work with a TV set-top box

To activate and configure IPTV, follow these steps:

1. In the "Layer 2 interface" section of the router's control panel, open another communication channel.
2. Create a new object in the WAN service.
3. Set the connection type to "Bridge".
4. Apply the changes.

After that, in the LAN settings, check the box next to "Turn off the DHCP server" (a technology developed by Sony to protect digital content from illegal copying and distribution). Then enable "IGMP Shopping" and "IGMP Proxy".

Possible problems

When setting up a Sagemcom router [email protected] 2804 v7 sometimes has technical issues. In this case, the network link indicator, marked with an "@" sign, glows red, and a message appears on the computer screen stating that the router is not found or is not available.

Fixed by switching the patch cable to another LAN port. Router identification errors are possible due to the lack of factory settings. In this case, you will have to prescribe all the necessary values ​​\u200b\u200bmanually. To correctly configure the device, it is recommended to connect it to a computer via LAN-port No. 3.