How to root a rose cutting into the ground. Planting problems and difficulties, ways to solve them. General rules for propagating roses

Gardeners often have a desire to grow on their site the new kind roses or propagate from existing bushes. The easiest way to propagate roses is by cuttings into the ground in the fall. Shoots are taken from the mother bush. To get good results when planting rose cuttings in the fall, you must adhere to certain rules. It is also necessary to take into account that not all varieties are suitable for obtaining planting material. Some can only be diluted by grafting.

Autumn propagation of roses

Cuttings can be planted in spring, summer or autumn, but many gardeners choose last option. Upon closer examination, planting rose cuttings before winter is actually more effective.

Choosing a mother bush

Many gardeners prefer autumn cuttings of roses, as they take root planting material It's much easier in the fall. This is explained by the fact that summer period the mother bush has accumulated nutrients and grown a large number of mature vines. This means that the possibility of selecting the most viable specimens increases.

The process of cuttings itself is particularly simple, but you also need to know the rules for further preparation of planting material.

Preparation of planting material

The time has come to start harvesting branches, and you have already chosen the mother bush for these purposes. All that remains is to learn how to properly cut the cuttings so that your efforts to propagate these flowers in the fall will bring impressive results in the spring.

For the best effect, the following actions are required: select the most viable mature lash and make a straight cut 1.5 mm above the top bud. After 4-6 buds, a lower oblique cut is made. Remove the leaves near the bottom cut, and thin out or shorten the leaves in the upper part. Treat the upper cut with manganese solution or seal with warm wax. It won’t hurt to use some means to speed up root formation before rooting. Instructions are usually included.

Need to know:

Picking plant roots: required procedure for seedlings

Caring for rose seedlings comes down to regular watering, ventilating the greenhouse, maintaining the required humidity and systematic inspection for the presence of pests and possible diseases. Young seedlings will spend the winter in the open ground, so care should be taken to select suitable shelter from the cold.

On permanent place bushes will be planted next spring.

Flower growers also use this option for rooting roses in the fall: cut cuttings are also planted obliquely in an open bed, with shelter from winter frosts placed above it. In spring, young plants are not replanted, but grown here until autumn.

Rooting stages

Rooting prepared cuttings can be done in different ways. You can first plant them in separate containers and plant them in the ground after the roots appear, or you can immediately plant them in open ground, where they will remain for the winter. If you use the first method, you need to properly prepare the planting containers, soil and seedlings themselves. Drainage is poured onto the bottom of the manganese-treated dish, followed by soil and a final layer of sand. The cuttings treated with a manganese solution are deepened into the sand, and each one is individually covered with a plastic bottle with the neck cut off.

The seedlings are placed in a warm, non-sunny place at a temperature of no more than +20 degrees. To maintain humidity at the desired level, it is enough to remove the caps from time to time and spray the seedlings.

In open ground, seedlings are planted in a bed called “cuttings”. Since it is impossible to propagate roses by cuttings in the open ground in winter, a shelter is erected on top of the bed to protect the plants from the winter cold. With the arrival of spring, the shelter is removed and the bushes are grown in open form. The plant is transplanted to a permanent location the following autumn.

A cutting is a specially separated part of a plant (leaf, shoot), which is used for vegetative propagation, and cuttings are vegetative propagation plants using cuttings.

A significant advantage of this propagation method is that the young shoot inherits all the characteristics of the mother plant and the ease of obtaining planting material (even roses from a bouquet can be propagated in this way). Besides plants obtained by cuttings do not form root shoots and tolerate winter better.

Plants grown from cuttings have a longer lifespan life cycle. There is only one drawback: it will be better if the young roses spend the first winter in the basement, since they have not yet become stronger and have not had time to grow a powerful root system. If this is not possible, then the gardener should work hard to insulate them.

When can you take cuttings?

Cuttings of roses are usually carried out in April - May or June - July, during the active growing season of the plant. But it is possible to take cuttings from the queen of flowers in the fall, while pruning plants for the winter. After such pruning, a large number of excellent branches remain, which can be used for cutting cuttings.

There are no universal terms for cutting cuttings, it all depends on geographical location. The reference point is the condition of the bush: if the leaf blades have withered and begun to fall off, you can start cutting shoots for propagation.

Distinctive features of autumn work

Autumn rose cuttings are stored until spring or planted directly into the ground. Planting of cuttings cut in autumn is also done in open ground, and in “cuttings” - specially prepared beds for rooting planting material.

The method of rooting in “cuttings” is to plant cuttings in trenches dug in the soil. Their depth is 30 cm, the bottom is covered with grass (2/3 of the total volume), the rest of the place is filled with compost (10 cm).

Cuttings are buried 2/3 into the substrate, the distance between them is 5–7 cm. Everything is covered from above special material to create greenhouse conditions ( polyethylene film, agrofibre, lutrasil).

However, many gardeners believe that it is preferable to plant the cuttings immediately in a permanent place; this way they experience less stress and take root better.

The distance between future rose bushes in this case should be 0.6 - 1.5 m, depending on the variety of the plant being cut.

How to root a plant in the soil under a jar?

How to preserve planting material until spring?

Problems and difficulties of planting, ways to solve them

The main problem with cuttings is that roses do not take root.

There may be several reasons:

1. Unsuitable soil composition: rose reacts sharply to lack nutrients and microelements. If the soil is poor, then it is necessary to “feed” it with humus and compost.
2. A rose variety that simply cannot be taken from cuttings. For example, imported roses from bouquets. Before transportation they are treated with special chemicals, which negatively affect the state of the escape.
3. The seedling was not insulated: the cutting rooted in autumn is very weak, it own strength not enough to survive the winter on your own. It definitely needs to be insulated!

Autumn is the most successful time of year for cuttings. Cuttings planted for rooting in the fall are more hardy, are accepted quickly and will delight the grower with the first flowers in the summer.

It is in the summer that propagation and cuttings of roses are more natural and successful, and direct planting in the ground allows young plants to take root well before the onset of severe winter frosts.

How and when to take cuttings

Summer cuttings involves the use of green cuttings in greenhouse conditions from April to May and in open ground conditions in mid-summer. High-quality planting material should be cut from absolutely healthy and only very well-developed parent rose bushes.

Standard length cuttings should be 10-15 cm. The lower oblique cut should be made directly under the kidney. The top cut should be straight and located 0.5 cm above the bud. The lower foliage on cuttings should be removed completely, and the upper leaves should only be shortened by half. A shoot with a diameter of 0.5-0.7 cm should be cut into a pair of internodes. Fattening green shoots should not be used for cuttings.

Features of summer propagation by cuttings

Properly prepared cuttings are a guarantee of successful propagation of roses in home gardening conditions. For cuttings, you can use any varieties of ground cover and miniature roses, and also use the method for propagating polyanthus and small-flowered climbing roses. It should be remembered that The survival rate of floribunda rose cuttings does not exceed 50%.

It is also quite difficult to carry out the process of cutting large-flowered varieties climbing rose, parks and hybrid tea roses any varieties. If it is necessary to propagate yellow-flowered varieties, it is recommended to use the method of grafting onto a winter-hardy rootstock. It is best to cut rose shoots for cuttings in the early morning or evening hours. Preference should be given to half-woody shoots that have recently faded or are preparing to flower. The main sign of the maturity of a shoot and its suitability for cuttings is the presence of easily breaking off thorns. Cuttings should be cut only with sharp and sterile garden tools.

Cuttings of roses in summer (video)

Green cuttings

This method involves reproduction garden rose in the second half of summer. It is in the summer that young shoots of roses with buds are not yet lignified and can quite easily take root before winter frosts. The rooted plants obtained as a result of such propagation have all the parental characteristics and are well suited for cultivation in home gardening conditions. It is best to take cuttings from mid-July to mid-August. A high-quality cutting must have at least three buds and a length of at least 12 cm.

Green cutting technology:

• immerse the prepared cuttings in a growth stimulator “Kornevin” or “Heteroauxin” for a day;
• plant the cuttings on pre-prepared beds under small angle;
• immerse when landing bottom part cuttings into the ground about 4-5 cm;
• compact the soil around the cuttings and cover the planting with cut plastic bottles.

The beds should be kept moist at all times. Planted cuttings must be sprayed daily using a household spray bottle. warm water. The rooting process takes a couple of weeks, after which the buds begin to grow. At this point, it is necessary to begin hardening procedures, periodically removing cover from young plants. In winter, plants need to be insulated with spruce branches, having previously mulched the soil with organic matter, which will prevent the plants from freezing in severe frosts.

Propagation can also be carried out by rooting cuttings in water, which is replaced every other day. Optimal temperature regime for the appearance of roots is about 22-25 o C with humidity levels at 90-100%. Cuttings need to be provided with diffused sunlight. A light nutrient mixture should consist of turf and leaf soil, as well as coarse sand, mixed in a ratio of 2:2:1. A third of the seedling container should be filled with soil mixture, and a layer of sand or perlite should be poured on top. When the roots appear, the cuttings are planted in a seedling container, from where, after a good root system has grown, it is transplanted to a permanent place.

Propagation by lignified cuttings

Lignified cuttings should be harvested late autumn period, in the process of pruning rose bushes. Rooting such planting material is quite a troublesome task, but quite feasible in the conditions of home gardening. When warm winter period it is possible to preserve rose bushes without freezing, and lignified cuttings from parent plants can be cut even in spring period.

If the planting material was cut in the autumn, when preparing the plants for winter, then further cuttings can be taken:

• store until spring with further rooting in a special cuttings or greenhouse;
• plant directly into the ground in the fall, before the onset of cold weather;
• root in seedling containers at home.

The cuttings should have approximately 6-8 eyes and have a thickness of 0.4-0.5 cm. All planting material should be cut from the middle part of the shoot, making an oblique lower and straight upper cut using a sharp and absolutely clean garden knife. Also finished cuttings can be placed in damp moss, as well as polyethylene or peat, which will allow the planting material to be stored on the bottom shelf of the refrigerator until spring and planting in a permanent place.

Features of propagation by stem cuttings

• self-rooted plants grown from cuttings are characterized by a complete absence of wild growth, which greatly annoys gardeners cultivating grafted roses;
• there is no risk of “degeneration” of a varietal rose;
• the rose bush completely retains the entire set of characteristics of the parent plant.

The disadvantages of such propagation include the formation of a rather weak root system and insufficiently high frost resistance. Such plants need to be provided with the highest quality shelter for the winter period.

Rules for care after landing

Caring for young rose bushes after planting rooted cuttings is not too complicated and consists of performing basic agrotechnical measures, including watering, fertilizing, loosening and weeding, bush formation and disease prevention.

When choosing fertilizers for feeding, it is important to remember that:

• phosphorus is necessary for flowering,
• magnesium stimulates the formation of chlorophyll,
• potassium regulates water metabolism in tissues,
• nitrogen is responsible for the growth of vegetative mass,
• calcium improves growth processes root system.

Therefore, the complex should be as complete as possible. Among other things, it should be remembered that all irrigation activities should be carried out with warm water strictly at the root of the rose bush. Fertilizers are used a couple of times before flowering and a couple of times after flowering of rose bushes.

Rooting roses from a bouquet (video)

After watering and fertilizing, shallow but thorough loosening of the soil around the bushes, as well as removal of weeds, is mandatory. Very good result provides mulching with organic components. In this case, the need for irrigation measures and weed removal is significantly reduced. In early spring, rose bushes must be treated before the buds swell with highly effective contact insecticides. The formation of plants depends on the species and varietal characteristics plants.

Propagating your favorite rose variety yourself is not difficult, even for beginners and inexperienced amateur gardeners. However, when cultivating such plants from cuttings, one should remember their increased sensitivity to any adverse conditions. external conditions, That's why rose bushes It will be necessary to provide high-quality and complete care at all stages of growth and development.

An excellent way to propagate shrub and climbing roses. Used only if the bush has long and strong stems.

Reproduction by this method is carried out from mid-July, roughly speaking, in the second half of summer. First, properly fertilize the part of the soil where the cuttings will be placed, clear the soil of weeds and loosen it. After a certain time, which is determined by the variety of rose, the long and flexible shoot of the plant is cut from the bottom side, about 8 cm. A match or sliver is inserted into the cut, and the shoot is lowered into the ground. It is advisable to secure it, since the layering will not stick on its own, even under a certain amount of soil. The free part of the shoot that emerges from the soil can be tied to a small peg.

In spring, the shoot should take root normally, which will give it the opportunity to grow on its own. At this moment, it can be separated from the parent bush and allowed into independent life.

Reproduction of roses is interesting, one might even say exciting process. For some summer residents, this is even a kind of disease. The professionals say correctly that once you start growing roses in your dacha, it’s very difficult to stop.

This method propagation of roses is very difficult, since it is often possible to grow from rose seeds a completely different variety, which is significantly different from the parent. Otherwise, it may grow wild variety, which you don't need at all. It is also important that from the moment the seeds are planted until they become adults, flowering plant, several years may pass, and this, you see, is quite a long period expectations.

Miniature roses reproduce well from seeds. To do this, you need to buy high-quality seeds, properly prepare them for planting and sow them in early spring. It is advisable to do this in April, and in a warm room, where rose seeds are sown in large quantities in fertile soil. Their germination rate is quite low, so you should not expect a whole rose garden from a package of seeds.

The resulting seedlings should be divided into two categories - weak and strong. The weak, no matter how sorry they are, go to waste, while the strong are replanted in pots. In just a few months, that is, this summer, young shoots can bloom.

Rose budding

Not only a common, but also a very popular method of propagating roses, which is most often used in nurseries. It all starts with a small, T-shaped cut in the bark on the trunk, closer to ground level. Next, the so-called peephole is inserted into the incision - a bud of a cultivated variety of roses. Thus, the grafted plant almost immediately begins to use the developed root system of the rootstock.

This method It is widely used for propagating roses, but it is only suitable for experienced people, since everything needs to be done very accurately and skillfully. In addition, budding has whole line nuances in relation to different varieties roses

A novice gardener may be faced with the question of whether it is possible to grow roses from cuttings in the fall? As practice shows, reproduction at this time of year is more effective than what is carried out in the spring.

Propagation of roses by cuttings in autumn

The rose is usually called the queen of the garden. The flower decorates the garden and fills it with a stunning aroma. In order for them to actively bloom and not encounter certain ailments, they will need appropriate care.

The most common method of propagating roses involves growing them from cuttings. Breeding a flower better in autumn. Such work does not require significant time investment. How to do this? Let's figure it out.

Autumn cuttings of roses - advantages and timing

If we compare cuttings with grafting, the former has a larger list of advantages:

• Flowers grown using this method do not form a wild root cavity, so they will need serious care.
• Flowers from cuttings are characterized by increased resistance to winter weather conditions. If their upper part is destroyed by frost, the plant will recover from dormant buds.
• To acquire planting material, you just need to take a cutting from a flower from a gift bouquet.

Autumn cuttings of roses

Reproduction and pruning are carried out in the same period - at the end of October and beginning of November. If you are thinking about this method of plant propagation, you need to find out which varieties are suitable for this:

• All varieties of polyanthus and miniature roses;
• Almost all varieties of semi-climbing roses;
• Climbing roses from the Rambler group;
• Excelsa roses;
• Large-flowered variety Flammentanz;
• Iceberg and Rosalind from the floribunda group;
• Hybrid tea (do not confuse with tea) roses take root in as soon as possible, but in the future root system is not developing as actively. That is why it is recommended to vaccinate them.

Propagation and pruning are carried out at the same period

As for remontant and park varieties, propagating them by cuttings is a complex process that only an experienced gardener can master.

Read also:

How to take rose cuttings

Reproduction is carried out according to the following scheme:

1. Take ripened shoots without signs of disease. Their thickness should be 4-5 mm.
2. Divide them into segments (each of them should have 3-5 developed buds).
3. Make straight cuts at the top and diagonally at the bottom. This way you will know exactly which part to plant the cuttings in. For work, use a well-sharpened tool. Be sure to disinfect it by scalding with boiling water or treating with alcohol.
4. Make the upper cut 2-3 cm above the upper bud, the lower one - under the one located below.

For work, use a well-sharpened tool

Important! If you do not plan to root the plant right away, do not pick off all the leaves; you will have to leave a few pieces so that it is provided with nutrition. Leaves growing from below need to be trimmed.

Planting a rose from a cutting

After you take the cuttings, you will need to locate the plant in a permanent location. This way it will not be stressed. Autumn rooting is carried out according to the following scheme:

1. Trim the cuttings and apply a root compound to them.
2. Dig a hole 30 cm deep, fill it 2/3 with grass, and lay a layer of compost on top of it.
3. Plant shoots at an angle of 45 degrees. Leave 1/3 of the cutting or 1-2 buds above ground level above the surface.
4. Water the plantings.

Planting a rose from a cutting

Not every gardener is aware of how to properly cover cuttings at the end of autumn so that they can survive after wintering. For shelter, you can use plastic or glass bottles. Make holes in them for air access or raise them above ground level. Cover the bottle with leaves and place them on top non-woven fabric. Drive pegs into the places where the plantings are located. For insulation is suitable straw shelter.

Roses from cuttings at home

Those who grow roses at home or in the country can resort to this method of propagation. Its principle is as follows:

1. In early November, after the first frost arrives, prepare cuttings with 2-3 buds. Their length should be within 20 cm. Please note that the buds may bloom at an inappropriate time. To prevent this from happening, dip the top of the cuttings into melted wax and then into cold water.
2. Place a layer of expanded clay (5-6 cm) and flower soil combined with perlite or vermiculite in a plastic bucket.
3. Water the soil and dip the bottom of the cutting in water. Then treat them with Kornevin and stick them into the hole. A container with a diameter of 30-40 cm can hold about 30 petioles.
4. Cover the bucket with cellophane or a bag and wrap it with rope. Secure the top of the bag with clothespins. You can also cover the plantings with glass jars (never leave them in the sun).
5. Wrap the bucket in a blanket and place it on glazed loggia. If the balcony has a cement floor, you need to place boards or foam plastic under the container.

Preparation of cuttings

Important! If serious frosts are coming at night, remove the pots indoors.

How to save rose cuttings in winter

If you decide to postpone the propagation of roses until spring, make sure that they can survive the winter. Proceed as follows:

1. Dig a hole 15 cm deep in the garden. Place covering material at the bottom. Cotton fabric is ideal for the latter. Place the cuttings on top of it.
2. To make it easier for you in the spring to find shoots that were hidden for storage until spring, drive wooden pegs along the edges of the hole.
3. Remove the leaves and place the cuttings at an equal distance from each other.
4. Cover with a cloth and place a small layer of soil on top of them.
5. After the snow melts in the spring, dig up the cuttings and inspect them. The fact that they have taken root will be indicated by the appearance of callus - a growth with roots. After removal, they must be immediately planted in a cuttings or in a permanent place.

Preserving rose cuttings for the winter

Advice. If it is not possible to plant immediately, place the cuttings in a container of water to which a few drops of a plant growth regulator (for example, Epin) have been added.

How to root a rose from a bouquet

How you want to extend the life of a gifted bouquet of fresh flowers. This is impossible to do, but if you try, you can grow a rose from them in your flowerbed. Cut flower stems into cuttings. You can root them at any time. For this you can use flower pots or plastic bags filled with moss or fibrous peat. For watering earth will do aloe liquid. For 9 tsp. 1 tsp of water will be required. juice of this plant. Inflate the bags a little and hang them from window frame. Soon a greenhouse effect will arise in this environment, and roots will appear on the cuttings.

Do not forget to pay attention to watering the soil in pots

Don't forget to pay attention to watering the soil in pots. Cut fresh sprouts and leaves by half. This way the plant will be able to retain its strength until it is planted in an open area.

Exist different ways propagation of roses, but we will focus on the most popular one = from cuttings. Very often we manage to get a cutting of a plant we like, but what to do with it next so that it does not die is unknown. We will help you grow beautiful flowers from rose cuttings.

You can even grow a rose from a bouquet at home by properly rooting the cuttings.

How to propagate roses from cuttings

This is a simple method that involves cutting cuttings with three buds and then rooting them. But questions arise about how to properly carry out cuttings; is it possible to root cuttings in water?

The middle or upper part of a healthy woody shoot, which has already finished flowering, is better suited for cuttings. Using a special garden knife or pruning shears, it is necessary to cut shoots 10-15 centimeters long, each of which must have at least 3 buds. They need to be cut so that the lower cut, made at an angle of 45º, is directly under the lower bud, and the upper (straight) cut is above the upper third bud. Rose growing technology involves partial removal leaves (this is necessary to reduce evaporation). The bottom leaf is completely removed, and the top ones are shortened by 1/3.

How to plant a rose cutting

What you need ideally: sufficient light, air temperature +23-25ºС, moderate watering and spraying.

Let's look at two ways to root rose cuttings:

• in the soil - for this they are planted obliquely on a prepared bed (if cuttings take place late spring or in summer), or at home in pots with a substrate of peat, sand (most) and fertile land. Cover the planting with a glass jar, creating a small greenhouse. You need to water the plantings as needed, and before planting the cuttings in the pot, you need to add well-washed coarse-grained river sand, into which you need to stick the cuttings (the sand will prevent the plant from rotting due to excess moisture). When it starts to produce young shoots, you can sometimes open the jar slightly to remove condensation.
• in water - for this, the cuttings are placed in a container of water and left in a warm, well-lit place. From time to time, the water needs to be changed and topped up, and after 20-25 days the cuttings will have roots and can be transplanted into pots with soil. You can add a root formation stimulator to the water for rooting cuttings - then the roots will appear faster.

How to grow a rose from a bouquet

Very often the desire arises from beautiful bouquet roses to grow the same flowers. This can be done, you just need to cut the cuttings in time and germinate them correctly. Cuttings are carried out when the flowers begin to shed their petals.

The cuttings are cut as usual - from below at an angle of 45º, and straight from above. There should be 1-2 buds on the cuttings. It is better to root shoots from a bouquet in the soil according to the general rules, but they need to be stuck into the substrate strictly vertically, deepening to the first bud. At proper care they will take root in about a month and begin to produce young shoots. It should be noted that cuttings of local varieties of roses take root better.

If the plants took root in the garden in the garden, then by winter it is better to dig up the first-year cuttings and transplant them into pots for wintering, which need to be put away in the house or in a dry cellar. And in the second year, they can already winter in the garden right in the soil, provided that the flowers are securely covered for the winter.

In order for roses to be resistant to diseases and pests, they need to be well looked after - watered and fed in a timely manner. The first feeding is needed when young seedlings reach a height of 15 centimeters. For feeding, it is advisable to take a complex fertilizer at a dosage of 15 grams per 10 liters of water. Please note that fertilizing roses with nitrogen should be stopped in mid-summer, but fertilizers with phosphorus and potassium can be applied until autumn.

Growing a rose from a cutting, video

Rose cuttings in potatoes, why?

In this method, the potato tuber creates nutrition and moisture for the roots and the cuttings grow faster.

Fresh potatoes contain optimal set nutrients. It is a long-term source of constant moisture and reliable protection from hypothermia, rotting, the development of bacterial diseases that sometimes affect roses on initial stage growth. In addition, technically growing rose cuttings in fresh potatoes is as easy as shelling pears.

To germinate rose cuttings, take recently dug tubers that are not limp or spoiled. Remove all eyes to prevent germination.

If the cutting is grown in a pot in winter, then simply select dense, large potatoes.

For cutting cuttings, it is not recommended to use shoots with unripe buds, as well as with already faded roses, since it is very difficult to root such cuttings - they simply do not take root. Propagation by cuttings is possible with purchased roses from a bouquet - there is no fundamental difference. But keep in mind that Dutch roses are treated with a preservative compound that ensures long storage; it is almost impossible to root them.

The length of the cutting should be 15-20 cm. Thus, from one rose or one medium-length shoot you can get 3-4 pieces for propagation. Cuttings should be cut with a sharp tool, preferably a garden pruner, so that the stem is not pressed when cut. The lower cut is made 2 cm below the bud at an angle of 45°, the upper cut is 1 cm above the bud, and the cut itself can be either angled or straight. All lower leaves the cuttings must be removed.

Next, sections of the cuttings are treated with a weak solution of potassium permanganate, and then placed for a day in a stimulating solution of any root formation stimulator, prepared according to the instructions for it. You can replace these products with fresh aloe juice.

After all the preparations, rose cuttings bottom stick into the prepared hole in the potato. Let me clarify that propagating roses in potatoes is only suitable for upright varieties. To grow a climbing rose, not a cutting is used, but a layering - a shoot buried and rooted in the soil, because growing layering in a potato tuber is very difficult.

You can root a rose in a potato tuber at home in a pot, or by immediately placing it in open ground. Planting cuttings directly into the ground provides an advantage - the roses will not need to be replanted, and this will allow them to bloom the same year or next spring. The area for planting cuttings should be bright, without stagnant water and protected from the wind. Further planting technology is as follows:

• dig a trench 20-30 cm deep (for planting in rows, or for further replanting to another place) - for planting single bushes without replanting, separate holes are dug for each plant;
• pour a layer at the bottom of the hole river sand– this is necessary to prevent contact of tubers with the ground, and to prevent rotting of the potatoes themselves, and with them the cuttings;
• Insert the prepared rose cuttings into the holes made in the potato tubers;
• place planting material in the trench at a distance of 15 cm from each other;
• Fill the trench 2/3 full with soil mixed with sand and compact it lightly.

Landings must be ensured good level humidity. Watering should be regular, but not too intense. For the first time, it is recommended to cover the cuttings with a plastic bottle with the lid unscrewed (to allow air access). On sunny days, the plants need to be shaded; on cloudy days, the bottle should be removed completely. After about a month, when the cuttings take root, the cover is removed completely.

Planting rose cuttings at home

To germinate roses in potatoes at home, prepare planting containers. You need to lay drainage at the bottom of the pots, then fill the containers with soil mixture (any store-bought soil for flowers will do) along with sand. Place the potato with the sprout in the pot. Sprinkle with soil.

In order for the cuttings to take root more quickly, the soil must remain moist, so in addition to watering at home, it is recommended to additionally spray future roses with water. A shelter made of glass jar, plastic bottle, or a plastic bag. After the buds begin to develop on the cuttings, the shelter is removed, and the seedlings are gradually adapted to the conditions external environment. Special attention You should pay attention to the quality of lighting, but you must ensure that the sprouts do not overheat under the lamps.