How to hide TV wires on the wall. Methodology for inexpensive ways to hide electrical wiring: methodology, analysis, recommendations How to remove a wire from the Internet
Read also
TV and Internet
It is not difficult to hide the network cable and television wires running around the room from view. It is best to use a special electrical skirting board that will run through the entire house to the bedroom or living room. If you don’t want to buy a new baseboard, you can carefully disguise a bunch of wires using special designer things, like a picket fence, as in the photo below:
In order not to pull the Internet cable from front door to the bedroom, it is recommended to install a Wi-fi router at the entrance to the apartment (in the hallway). In this case, the connection to the network will be wireless and you will not have to run the cable between rooms, through doorways and thresholds.
In addition, you can hide television wires in a cable channel, which is quite easily attached to the wall with self-tapping screws. Today there are many types of cable channels that will suit the color not only ordinary apartment, but also in wooden house.
If the repair has already been done, then the most the best solution There will be the use of decorative elements - beautiful clips that will decorate the wires from the wall-mounted TV running along the floor and wall. You can also see an example of this method of solving a problem in the photo:
If you want to hide the cords from the TV during repairs, we recommend making a special niche for them in the drywall or, conversely, assembling a box:
In order not to damage the walls, you can hide the TV and Internet cable in the baseboard if you do it as shown in this video:
How to carefully remove the cable?
Well last method– cut a groove in the wall behind the plasma and run it along it electric wires. However, this is the most time-consuming option and is best avoided. Imagine that the TV will need to be hung on another wall, and you will have to think again about how to hide the antenna cable.
As for the rest of the household appliances - air conditioning, music center or even a home theater, using the ideas listed above, you can disguise hanging wires using the same technique. The cable from the air conditioner is most often hidden in a cable channel, and the wires from the home theater are run above the baseboard, secured with special clips.
Computer
Computer wires greatly spoil the interior of a room, and if you get a little creative, you can hide them quite beautifully.
The first idea is to disguise all the cords from the monitor, system unit and the modem under the table cover, securing them using clips on self-tapping screws or Double-sided tape. This idea is clearly shown in the photo example:
You can see another simple way to hide everything unnecessary under the table cover in this video lesson:
How to remove unnecessary cords from the “computer”?
Don't want to spoil the table? You can hide the wires from your computer equipment in a shoebox, decorating it in an original way to match your bedroom interior.
You can find out how to make such a box with your own hands by watching this video:
How can a shoe box be useful?
Besides original idea It is considered to be the purchase of a special cover for the extension cord, which is quite simply attached to the lid desk.
If the cord from the speakers bothers you, you can easily hide it in an appropriate case that is attached to the back of the table.
All unnecessary cords, including charging, can be beautifully removed from the table using ordinary clips, as in the picture below:
Another idea is to thread the whole bunch of wires through a hose. In this case, the chaos under the table will hide in one single shell, which will not spoil the interior of the room or even the office so much.
Using all these tips you can disguise electrical wires and make workplace more neat. There's nothing complicated about simply placing cords and cables in a box or securing them under a table! In addition to the fact that in this way you will put things in order computer desk, and also disguise allows you to protect the cords from dogs and cats that like to chew on chargers, headphones, etc.
Lamps
Today the installation is gaining more and more popularity spotlights in a house or apartment. As a rule, there are more than 4 spots on the ceiling, so there are quite a lot of wires to connect them. There are several ways to hide unnecessary things from view, depending on the type of ceiling in the room. The easiest way is if the ceiling is suspended, because... in this case, you can disguise the wires with the ceiling film itself. If ceiling covering plasterboard, wiring can only be hidden under sheets of plasterboard, inside the frame.
If all the wiring from the chandelier is hidden in the lamp body, then the cord for connecting the sconce is a little more difficult to hide. If the wall is bare, you can decoratively hide the hanging wire by extending it and making a design on the wall. You can see an example of such an idea in the photo:
If you are thinking about how to hide the wires from the sconce during repairs, it is best to make a groove in the wall and connect the lamp from distribution box, and not through the outlet. In this case, all electrical wiring will be hidden under the plaster and wallpaper, and the interior will not be damaged. Do you want to do without gating? Then hide all the extra ones in the cable channel running along the wall.
You can hide the power supply from the LED strip in a special box, which is mounted under the ceiling and allows you to make a hidden LED backlight in the kitchen or in the living room.
That's all I wanted to say about this issue. We hope that you have gained ideas for yourself on how to hide wires from a TV, computer and other household appliances so that it is beautiful.
samelectrik.ru
How to hide TV wires on the wall - simple solutions versus non-standard ideas
If there were wires hanging under this TV, the appearance of the room would be spoiled We welcome everyone who visited us on the Internet. Our portal is related to electrical issues, but we do not forget to periodically talk about things related to it indirectly, which, however, are no less important in our everyday life.
The choice of today's topic fell on a TV on a bracket, namely, how to hide the wires from the TV on the wall. At first glance, it may seem that the question is not so complicated, but even the most ardent skeptics, after reading the material, will discover something interesting and new. So, let's go!
Capital measures
We will start with the most obvious and will gradually move towards more interesting and original solutions.
Right into the wall
Popular today more than ever hidden wiring, and in general, people try to hide from sight any communications that, in their opinion, spoil appearance interior The antenna wire for a TV was no exception, which very often has to be stretched across the entire apartment or house, since a high-quality video signal can often be obtained only by installing the receiver only in a certain place.
Skirting can hide wires - Helps a lot in solving this problem floor skirting boards with cable channels capable of hiding most of the cable along its length. However, if the TV is hanging on the wall, the wire has to be taken out of the baseboard and directed towards it, and it’s not difficult to guess that the whole picture immediately deteriorates.
- Plus, don’t forget that the TV antenna wire is not the only cable that fits the TV. At a minimum, you will need to power the equipment from electrical network, well, at the very least, they will also include: the Internet LAN cable(many modern TVs are, in fact, already a computer capable of accessing the network); wires for transmitting video and audio signals from various DVD players, TV receivers, HI-FI speakers, etc.
- The picture begins to emerge and is completely terrifying, and sometimes the most that can be done is to wrap everything up in a heap with nylon ties, and at least somehow try to disguise all this disgrace.
Perhaps the most time-consuming and dirty way to hide such a number of wires would be to lay them in grooves made in the wall during repairs. However, the method can safely be called the most accurate and technologically advanced, since the wires hidden in this way will not be chewed by your cat, no one will accidentally touch them with their feet, plus everything will be displayed in a single console containing everything necessary exits.
In this case, there is no need to drill into the entire wall to route all the wires around the room. It is enough to stretch them to the same baseboard and hide everything else in it.
The only thing missing is an internet outlet The big disadvantage of this approach is that it is applicable only in premises where renovation work is being carried out. If your walls are just finished and you don’t want to touch them in the near future, then scroll straight to the next chapter, which will offer alternative methods for hiding a television antenna wire.
If you are ready to take drastic measures, then stock up on tools and move forward:
- First of all, you need to accurately mark the location of the TV on the wall.
- Next, you determine which bracket you will use for installation. This point is very important, since, despite the global VESA standard, which includes the most common mounting points, the brackets themselves can be different shapes and dimensions.
Advice! Without paying attention to this, you can end up with communications peeking out from behind the TV body, since the bracket is too massive, or it will interfere with switching.
- It is advisable that you already have the device in your hands so that everything can be measured accurately.
- Try on the bracket for the TV and measure the distance that remains to the edges - this is where we will place all the sockets.
- We transfer the measurements to the wall and start dusting. Using a grinder, cut two vertical stripes a couple of centimeters deep, at a distance of 2-3 centimeters from each other.
- Further inner part It is hollowed out with a hammer drill to form a full-fledged groove.
Mounted TV socket - After, using diamond bits, a series of holes are made for the purchased TV socket. Immediately make sure that this element contains all the necessary outputs and a sufficient number of power points so that it is enough to connect all the equipment.
- Further actions are extremely simple. First, all the wires are laid in the grooves, which must first be secured with plastic staples so that they do not fall out and interfere with further plastering.
- The ends of the wires are connected according to the diagram with the socket, and it is installed in its place.
- All grooves are sealed gypsum plaster, after which subsequent finishing is carried out.
Cable channel
A less elegant solution would be to use a cable channel, but not everything is so simple - you can make this element yourself or find a non-standard store-bought version, making it an integral part of the interior. Plus, don’t forget that implementing such an idea will be much easier and faster.
Aluminum cable channel perfect for any modern style Having studied the assortments of electrical goods stores and electronics stores, you can find following types cable channels:
- The simplest option is PVC. We've all seen them - it's common plastic box white or another color, which has a removable lid held on by latches. Such a product can be successfully integrated into the interior only if it is combined with its surroundings according to color scheme- will merge with it or, on the contrary, will be brightly contrasting.
- Quite a rarity are models made from MDF, which can be effectively combined with the surrounding environment.
- Metal options– most often it is aluminum, which is shown in one of the photos above. This product looks impressive enough to become part of some futuristic interior.
The structure of all models is very similar. They are attached directly to the wall using dowel screws, after which all connections along with the wires are hidden under a decorative cover.
As already mentioned, in some cases it is advisable to make a box with your own hands. The quality of workmanship and the final appearance will depend entirely on your ability to handle the tool, as well as the type of materials used to decorate the room.
The photo above shows a very simple and at the same time effective way assembling a similar box. It is made from planed boards, between which all the wires are laid. You can place any decorative overlay on top of them, and the boards themselves can be painted in any shade to make them as inconspicuous as possible.
Horizontal homemade cable channel made of wood Special furniture
The main thing is to reach the outlet Furniture manufacturers also did not ignore the problem and offered the buyer their solutions.
As you can see, the variety is very large, and there are plenty of non-standard furniture options. In part, they are not able to hide all communications and still require gating, but with this approach there will be much less dirt, so you can resort to this method even in a renovated room, doing everything as carefully as possible.
Creative approach to problem solving
Well, for dessert, we offer you several options that can not only be effective, but will also allow you to additionally decorate the room.
Decoration
A very interesting way out of the situation would be not to hide the wires from the TV on the wall, but to decorate them, that is, to make them part of the interior.
Here are a few interesting examples:
There are a lot of decoration options, and even manufacturers offer their own solutions. And if you have enough experience and imagination to create and implement your ideas, you can mere pennies create a real masterpiece.
The most in simple ways artistic decoration will have the following options:
- Parts of the wires can be placed behind the furniture, attached to it on the reverse side with tape or staples;
- Install live plants under the TV;
- Use varnished driftwood;
- Make a necklace out of wire by putting large beads on it;
- Use ready-made plastic fasteners from the manufacturer;
- And much more.
Decorative boxes
If the wires themselves do not bother you much, but massive tees and extension cords are an eyesore, then original solution The question will be their placement inside a decorative box, which you can make yourself or purchase ready-made option. By the way, instructions for assembling one of these solutions will be given in the video attached to the article.
Also very effective various devices, allowing you to hide and secure the largest parts in inconspicuous places.
Here are some photos with similar solutions:
That’s basically all we wanted to tell you about how you can hide or disguise the antenna wire for a TV and other cables. No need to put up with reality! Approach the matter wisely, and the result will not keep you waiting!
elektrik-a.su
How to hide wires in an apartment
It is completely unsightly when, after renovation of a room, the wires are not hidden in the wall, but lie randomly on the floor or hanging on the wall. They not only spoil the overall picture of the room, but can also lead to an accident. In some cases, you have to think about how to connect some kind of device without spoiling the design of the room. Of course, it is worth paying attention to how to hide wires in an apartment.
Each home is connected to one or another Appliances, and in any case, the wires on the wall from these devices can be conspicuous in one way or another. This article will give detailed instructions on how to hide wires on the wall, in the wall and in the floor.
Hiding wires in the wall
Laying the wire in the groove
First, using a wall chaser, you need to remove the remaining plaster and concrete and cut a groove in the wall in which all the wires will be hidden. The wiring must be placed in a protective sheath - corrugation, which serves to protect against external adverse influences. Then the wires should be laid in the cut channels, after which the wall must be plastered.
To hide the wires in the wall, you have to break its integrity, and you often don’t want to do this, since this will damage the interior, in addition, the work is associated with dust and debris, and subsequently the wall must be reconstructed, which involves certain costs. Therefore, you can use other, more profitable methods, in which you do not need to resort to chipping the wall.
Wire on the wall
Mounted on the wall
If you have artistic taste, you can fix the wire on the wall and make a picture out of it. It is quite clear that a native, one and a half meter wire will not be enough for these purposes. Choose a suitable drawing and transfer its outlines to the wall, making a light-colored drawing with a simple pencil. Now you need to calculate the required amount of wire. To do this, you can attach a nylon thread to the wall so that it repeats the pattern. Then its distance can be measured. Don’t forget to add the length from the drawing to the outlet and to the source of electricity consumption - add a meter in reserve and you will get the required amount.
Wire manufacturers most often do not offer an abundance of wire colors, so you have to choose from what is available - black or white. If these colors do not suit you, then you can buy an extension cord, which can be pink or red. Don’t rush to rely on your opinion - try attaching a strip of colored fabric to the wall and you will immediately see whether the chosen color is suitable and will harmonize with the overall decor.
Decorated wire is not noticeable
If you decide to do everything simply but tastefully, then you can attach the decor to the wire or come up with your own, something original.
Alternative Methods
Wires covered with cloth
You can find a different approach - mask the wires rather than hide them, and existing elements of the room will help in this, for example, door frames, baseboards, ceiling moldings, as well as heating risers. With the right approach to work, the laying of wires can be made almost invisible, which will have a beneficial effect on the interior of the room. Usually low current wires(Internet and telephone) do not cause any difficulties in laying, they can be hidden in baseboards, under metal thresholds or in platbands. When laying the power cable, a different approach is needed.
It is problematic to stretch power wires along the wall, since they are large in cross-section and almost always white, which makes them stand out significantly against the background of the wall.
Often all electrical communications nowadays are laid hidden method, but due to various circumstances this installation option may not be possible, for example, when, during repairs, it becomes necessary to install additional sockets or switches.
Hiding the wire in the cable channel
Cable channel
There is almost always a section of wiring in the house that needs to be trenched into the wall or closed using a cable channel, which is a plastic box - it will protect the electrical wires from mechanical damage. The box has an attractive appearance and in this case it can be used as decorative element. This option is also a solution to problems fire safety.
Laying the wire in the bathroom can be especially difficult when the walls and floor of the room are completely tiled. If available in the bathroom suspended ceiling the wires can be hidden in it, and if this is not possible, then a cable channel will help in this situation.
It is not recommended to install sockets in the bathroom, and if you do not urgently need it, abandon this idea and limit yourself to installation lighting fixtures. If you need an outlet, then worry about safety precautions, and the outlet must be waterproof.
Wiring on the floor
Skirting board with cable channel
It is also worth paying attention to how the wires are laid on the floor. Currently produced special skirting boards, in which a niche for the cable is structurally provided. The top panel of the plinth is removed, the cable is laid there, then it is put back in place. Advantage this method– convenience and dust-free operation. You can hide computer wires and a network cable in such a plinth.
Box for chargers
Often we get in the way of wires from various chargers. In this case, you can do as in the photo - hide them in a box specially made for this. If you can suggest your own method, then at the end of the article you can add a comment and attach a photo of your invention to it.
Installation of wiring on the floor
Strobe in the floor
If it is necessary to hide the wires in the floor, then using a wall chaser or hammer drill, a groove is made in the concrete, the wiring is threaded into the corrugation and placed in this recess. Upon completion of the work, the installation site is leveled with sand-cement mortar.
If your house has a wooden floor, then in order to conduct wiring under it, you will have to remove the boards, and the cable will live in metal pipe.
Hiding the wires from the TV
As a rule, the TV is placed on the wall in plain sight, so the wire from the TV will be very visible to others. It is best to hide the wire in the wall and make the sockets behind the TV. For this purpose, a groove is made in the wall with a wall chaser, or if there is none, then with a hammer drill, the wires are collected and laid in a corrugation. Then the wires must be secured in the groove using special fasteners and brackets and plastered.
If you don't necessarily need to completely hide the wire, you can disguise it.
It is best to consider all the subtleties associated with wiring in the house at the stage of renovation of the premises, so that problems do not arise later.
Video
See how you can hide the wire from the lamp in the baseboard:
This video shows how to make and hide home theater wiring:
Photo
The wire from the sconce is decorated
Wall wiring options
Wire laying ideas
Wire decoration methods
This simple idea will improve the design of the room.
All wiring is hidden in the cable channel
Wiring hidden in baseboard
You can make this kind of furniture yourself
The wiring is laid in a groove
kakpravilnosdelat.ru
How to hide wires in an apartment: basic tricks (51 photos)
Any person wants to make their apartment as comfortable as possible and does everything possible to comfortable stay. Thanks to modern technologies a lot of equipment is equipped wireless devices, but still the number of wires from the rest of the equipment is actual problem. Wires sticking out everywhere certainly spoil the interior of your apartment. If the apartment is Small child, it is necessary to urgently solve the problem with the wires, since protruding wires are not only unsightly, but also unsafe.
Let's take a closer look at how to hide wires in an apartment.
Where to hide the wire on the ceiling or floor?
You can build a small plastic box if the wires in your apartment run along the ceiling or floor level. You can screw the box using self-tapping screws. Lay the wires inside the box and close it with a special door. This option is considered the most common and easiest. If your apartment has stretch ceiling, you can make a container from drywall, put wires in it and fix it under the ceiling. A plastic or plasterboard box is, of course, better than protruding wires, but still not the best option.
How to hide a wire in the wall?
There is nothing complicated, if you have the necessary tools, you can hide the wire in the wall. Using a grinder, you need to make several holes where the wire will be laid. Using a hammer drill, remove the main part, and the grooves are ready. It is not difficult to place the wires along the laying line; after installing the cable in the hole, it is immediately fixed using building gypsum.
How to hide a wire on the floor?
The smartest way to disguise unwanted wires is to hide them in the baseboard. For this purpose, there are specially designed skirting boards with a recess for the cable. You need to remove the retractable center of the plinth, insert the cable inside and secure the middle of the plinth in place.
If the question of masking the wire arose during the repair, you can make a hole in the floor with a hammer drill, then insert the wire into the corrugation and lay it in the hole. After the procedure is completed, it is necessary to fill the holes with cement.
Hiding the wire from the TV
Most often, the TV is placed on the walls. The question of how to hide the wires from the TV on the wall becomes relevant. A decorative box will help hide them; this method is described above.
The most the best option is to disguise the wires in the wall and install sockets behind the TV.
This is quite simple to do: a small hole is made in the wall, the wires are laid in corrugation. The hidden wire is fixed in the groove and the wall is covered with plaster. Thanks to this solution, all wires will be hidden.
Hiding wires from the computer
IN modern world There is a computer in almost every apartment, so the most urgent problem- how to hide wires from a computer. A string of wires not only looks messy, but is also unsafe. To make things a little easier, use wireless technologies, where possible. Today you can do without the use of wires in the following computer components:
- Computer mouse.
- WiFi router.
- Keyboard.
- Acoustic system.
A wireless connection will help you get rid of several unnecessary wires. To ensure that the electrical wires do not lie twisted on the floor, it is necessary to purchase wires of the required length, this way the wires will be stretched. Wires that lie on the floor can be secured under the table with tape or other adhesive tape.
Excess wires can also be hidden in a decorative box. You can choose a box that will look beautiful in combination with the design of the room or cover it with suitable materials.
Another option is to hide the wire in the baseboard. You can read above how this is done.
If for some reason none of the listed methods are available in your apartment, do not rush to lose heart. There are several more secrets to disguising wires: electrical wires can be used as a decorative element. Using decorative fasteners you can create a unique picture on the wall. Decorative fasteners are usually sold in a variety of shapes and with a large selection of colors. You will need a little imagination and the wires will help transform the room with new colors.
You can hide the wires by simply blocking them with a decorative element, for example, using big pot with fresh climbing flowers.
If your apartment has a lot of different furniture, you can install an armchair or sofa at the location of the wires.
There are a lot of ways to hide unwanted wires in an apartment, everyone can choose the most suitable option for your apartment.
If you have any questions, leave them in the comments below the article. We or our visitors will be happy to answer them
To make your home cozy place, where will it be desire come back again and again, many use it different ways. Someone does major renovation, hiring a team of builders, others make cosmetic repairs, hoping for own strength. For some, it will be enough to put things in order, put everything on shelves, and throw away unnecessary things. But sometimes many who have made repairs or simply cleaned up wonder how to hide the wires on the wall beautifully. This article describes tips and ideas for suitable decor in as much detail as possible.
Often, many people hire designers, space organization specialists, etc., spending considerable amounts of money when they can decorate the cable themselves for free.
TV wires
How to hide the TV cord on the wall- one of the most common queries on the Internet. In order to close tv cable, you can use the following recommendations. If the TV is wall-mounted:
When the TV is on a table, chest of drawers, etc., it is observed that all the wires are connected to one socket through a common adapter. It all looks like a tangled ball of threads, which greatly spoils the design of the room. Therefore, to get rid of the problem of where to disguise the television cable, It is not critical to use the following secrets:
Charger wires
In the century rapid growth development technical means, information technologies, modern people use it daily by various means connections: laptop, smartphone, tablet, computer, etc. Sometimes it’s impossible to sort out the huge number of wires on the desktop. They often get tangled, become unusable due to improper storage or use, etc.
To decorate your workplace, hide the wires, you can use the following instructions:
If all of the above methods fail to decorate your apartment, then you should not give up. You can resort to alternative options:
But everyone has the right to choose the most suitable and convenient way how to hide wires in an apartment. And you don’t need much for this - just desire, patience and imagination are enough, and then there will be a result.
Most often, all electrical communications in modern houses and apartments are being laid in a hidden way, but sometimes, due to emerging circumstances, such a method of laying is impossible. For example, when repairs to the premises have already been completed, but something was not taken into account. Such problems need to be solved, and modern builders have several methods in their arsenal. In this article, together with the website, we will study the question of how to hide wires on the wall - we will consider everything possible options and ways to implement them.
How to hide wires in an apartment photo
How to hide wires on the wall: the importance of the natural topography of walls
Hiding wires on the wall without cutting them is quite problematic. Even the cable channel that is used for external gasket electrical wiring does not give the desired effect, and in any case the interior undergoes changes. Here we need a different approach to the matter - you need to not hide, but disguise and you can use any means to achieve this goal, including existing elements of the premises. Any apartment or house has a lot of details that it would be a sin not to use - these include door frames and even heating risers. If you select the right approach to the point, the wires installed in this way will be practically invisible and, most importantly, will not affect the interior of the room.
In most cases, problems of this kind arise with power wires- they are thick, almost always have White color and stand out significantly against the background of the wall decoration. With low-current wires (telephone, internet), the question of how to hide the wires in an apartment usually does not arise - things are a little simpler with them, and there is no need to raise them above floor level. Therefore, they are usually laid in baseboards, and door passages - under metal thresholds or under platbands.
How to hide cables in skirting boards photo
An interesting option for laying any wires is to install them under ceiling moldings. The fact is that this interior element can be called the cheapest and easiest to manufacture - for the sake of beautiful view they can sacrifice premises. Everything here is quite simple - we tear off the baguettes, and we do it carefully so as not to damage the rest of the finish. We put the wires in the very corner between the wall and the ceiling - here it is better to glue them (for example, with hot glue). And after that, we restore the ceiling moldings - instead of the old skirting boards, we glue new ones and paint them using masking tape. In this way, you can solve the problem of how to disguise the wires on the wall going to the balcony or to the air conditioner.
In general, if we are talking about, then the question of how to hide the wires cannot be solved using the techniques described above. There is always a section left that needs to be either chipped into the wall, or the cable must be covered with a channel. This is a special plastic box whose purpose is to protect electrical wires from mechanical damage. In principle, this cable channel has a fairly attractive appearance, which allows it to be used for decorative purposes.
Masking wires in ceiling moldings
By the way, in some situations this product can also be turned into a decorative element of the room - for example, into a semi-column. In this case, it is better to set it knowingly big size channel cable, and mount the socket or switch not on the wall, but on the box itself (on top) - for this you will need to install wooden insert. Subsequently, by adding another such element for symmetry, they can be decorated to match the entire room - they can be covered with wallpaper and, if desired, even decorative plaster can be applied to them.
Such alternative ways, or it would be more correct to say, there are quite a lot of places for laying electrical wires, and in each room they are individual. The most problematic of all rooms in a house or apartment is the bathroom - it is solid and the floor does not allow for laying, including masking, wires. There is only hope here, if, of course, it is present in your premises. If it is not there, then only the cable channel remains and nothing else.
In general, all these nuances associated with laying wires along already finished walls are better to be taken into account - you need to plan everything, including the installation of electrical appliances that you want to purchase in the future.
An additional outlet cannot in any way spoil the appearance of the room. Even if it seems that it is bothering you, then you can prepare everything for its installation and simply - and the rest can be easily completed without damaging the room after the renovation, and the question of how to hide the cable in the apartment will no longer arise.
How to disguise wires on a wall photo
How to disguise wires: rules for laying hidden electrical wiring
Let's consider another situation with laying wires in rooms where renovations have been done, but using more or less normal technologies. Although it will also be difficult to do without the points described above. What is meant by more or less normal technologies? We are talking about laying the wire in the floor (if you have a wooden one) or behind the baseboards, with the rise up to the installation site of sockets or switches in the groove. You can hide the cable on the wall in this way only if you still have materials for wall decoration after the repair - then it becomes possible to perform an operation to remove part finishing material, punching the groove, laying the wire in it and then restoration work. In principle, if we are talking about walls that are not pasted over, then they can be completely soaked and then re-glued.
How to hide wires on the wall photo
Such approaches to the matter should be used only if the fundamental point is the location of the sockets or switches. If the role of this place is insignificant, then punching grooves can be completely abandoned in favor of an overhead socket installed directly above the baseboard. It won’t be very convenient to use, but if we are talking about constantly connecting something, then why not? The only thing for which this method of solving the problem of how to disguise the wires is not suitable is for switches - you don’t think that it will be normal to control the light with your feet?
In conclusion, a few words about such a moment as pulling wires through plasterboard structures. If we're talking about about laying an additional wire over short distances, it is difficult to come up with anything better than this solution to the problem. To do this, steel wire is used, which is threaded even through a small hole made in the ceiling or plasterboard wall and brought out to a place where wires already exist (for example, to an outlet). Then he is tied to this wire insulating tape cable and stretches behind the wall - you will have to tinker with the wire, but as a result you will get full-fledged hidden electrical wiring.
How to hide a cable in an apartment
That's all that can be said about the question of how to hide wires on the wall? The only thing that can be added is that all your actions should be aimed at safe operation electricity. Carefully consider where to lay the cables, and then everything will be in order!
The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.
There are also ready-made solutions, such as Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on top for cables, and inside there are three fasteners that can be used to wrap cords that are too long. The Plug Hub can be placed on the floor or mounted on the wall.
amazon.com 2. Secure the wires under the tabletop
To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then in in the right places secure the binders with screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.
There is an easier option if you don't need to hide a large number of wires This will require construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires, it is better to use special clamps (for example, these).
Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back of the tabletop with screws, and then attach the extension. To prevent wires from dangling under the table, pass them through cable channels- they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.
3. Organize your cable storage
They will help you get rid of tangled wires. proper organization. First, collect cords from phones, players, etc. throughout the house. game console, tablets. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.
If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.
If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:
4. Keep all necessary wires at hand
We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that if necessary, you can reach out and connect the device to the desired wire. Sugru will help us with this - plasticine-rubber and one of the most irreplaceable things in the household. Don't believe me? Then take a look.
Roll Sugru into small balls and secure them to a table support. Then stationery knife remove some plasticine (carefully, try not to deform the balls too much). Life hack: to prevent plasticine from sticking to the blade, rinse it first soapy water. Then adjust the shape a little with a sushi stick or toothpick to create neat hollows (they should be slightly wider than your wires). Everything is ready, you can fix the cables.
There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on your desktop.
The simplest solution is to pass the wires through binders attached to the tabletop.
hexjam.com 5. Don't hide wires
Seriously, if you get creative, cables can become interesting element decor.
We choose wallpaper with a cute flower or a fashionable snow-white finish, shabby or, on the contrary, ultra-modern furniture, napkins that match curtains and cushions on chairs - in a word, we create a special small world With unique style. But there are things that cannot be avoided in our age of progress and which, taking advantage of this, impudently spoil the entire idyll we have carefully created. These include, for example, electronics and household appliances. However, manufacturers began to produce equipment in large assortment, suitable for different styles, and in embedded versions. Another enemy is the wires stretching from this very equipment along the walls and floor. For those for whom they are an unbearable eyesore, we offer several ideas for disguising them.
We all know that most often the wires are hidden under the baseboard, and they try to match the sockets to the color of the finish and buy them with special lids that ensure safety for children and a more attractive appearance. But what to do if, for example, a new Internet operator came to you and installed new wires? Or have you decided to move the TV to that corner of the room where there is no outlet? Why not redo all the repairs because of this? You can always get creative and block the wires, e.g. decorative fence. And block the outlet or new Internet router with some kind of homemade barrier, turning the unsavory element into an art object. The example below shows an easy-to-create geometric iceberg.
So that the wires lie behind such fences without bristling, another will help us all known method to make the appearance of wires more neat - zip ties.
You can make these clamps yourself from regular Velcro. Velcro clamps are also quite easy to find on sale; their significant advantage is their reusability.
You can also make homemade fasteners for wires from office clips. Clips as clamps can also ensure their fixation to the wall. From the same clothespins you can make a separator for the charger inputs.
While the idea of using wire clamps is obvious, not all of us realize how useful they can be in ordinary life. Here is an example of how the look of your desktop changes thanks to these simple things.
Now on sale you can find very nice versions of clamps, for example, in the form of leaves.
On this same plant theme There are also camouflage covers for wires.
You can play up the look of wires stretching across the room with the help of improvised means, stickers and your own drawings.
If the insulators on your wires are at least a little similar to aesthetic ones, you can not disguise them at all, but, on the contrary, make them an object of design art and general attention. Here are some examples for inspiration. This idea is especially suitable for loft-style interiors.
Wires hanging from the desktop, if your desk is against the wall, can simply be curtained.
Or reason with the help of special hanging hammocks.
Such a device can be ordered from, where there is another gadget for pacifying tangled wires.
You can find similar separators for wires and charging inputs on sale in the form of boxes.
However, it is not at all difficult to make such a separator yourself, for example, from a shoe box. Your new desktop device will look especially beautiful if you wrap the box with beautiful paper or fabric.