How to glue baguettes to the ceiling with putty. How to properly glue a plastic baguette. Choosing the right glue

How to glue baguettes to the ceiling with putty.  How to properly glue a plastic baguette.  Choosing the right glue
How to glue baguettes to the ceiling with putty. How to properly glue a plastic baguette. Choosing the right glue

Repair is a serious thing, but simple, if the algorithm of actions is clear, taken necessary tools and high quality components are used. Let's try to consider one of components in interior decoration– baguettes.

Definition

Baguettes are decorative skirting boards or borders made of polymer materials, which ultimately look like molding, complementing the neatness and aesthetics of the finish. They are usually sold in sections of 2.5-3 meters, are easily cut with a construction knife and can be applied using:

  • silicone glue;
  • liquid nails;
  • other polymer adhesive composition.

First, let's look at how to properly glue baguettes to the ceiling and walls, and then we'll look at why most people do this procedure differently.

Which is correct?

There are two conflicting opinions. Some believe that baguettes are glued to the ceiling as a final finishing touch, that is, this happens on wallpaper or on walls with another decorative coating. Others argue that it is correct to first glue the baguettes, and then start finishing the walls. Where is the truth? In fact, both are right, but in different cases.

If the walls are smooth, prepared, and the angle between the walls, ceiling and walls is 90 degrees, of course, baguettes are glued first, which ultimately allows you to evenly adjust the wallpaper or plaster. But if the walls are uneven, the corners are loose and there is no way to fully level them, then, of course, the baguettes are already glued to the wallpaper or decorative trim.

Therefore, if you hear a categorical opinion about the need to choose one method or another, you should evaluate specific situation and the ability to prepare the walls. Only after this should we begin to take decisive action. A lot also depends on the glue. If there is no alternative, then paper wallpaper baguettes can be glued with regular PVA. However, in other cases, if the wallpaper is, for example, vinyl or non-woven, it is not advisable to glue the baguette onto PVA, it simply will not stick.

Materials and tools

Now let's see what equipment is needed in order to properly glue the baguette. Let's take a look at which adhesive materials will be the most convenient and practical. So, for work you will need:

  • construction or stationery knife with replaceable blade;
  • a simple pencil;
  • polymer glue or liquid nails;
  • hacksaw;
  • level for determining angles;
  • brush for applying glue;
  • miter box for corners;
  • soap solution;
  • a hard and soft piece of cloth (hard - for degreasing the surface, soft - for wiping off glue).

As for the adhesive composition, silicone glue, liquid nails or an adhesive composition such as “Titanium” or “Moment” would be ideal. If you use liquid nails, you will need a construction syringe. When applying any glue, it is very important to degrease the surface; a soap solution will help with this. If this is not done, after some time the baguette will simply fall away from the walls.

Count

It is also important to correctly calculate the quantity required material. For example, the length of the baguette is 2.5 m, and the length of the walls is 4 and 3 m. In this case, you will need 3 baguettes, even taking into account the cutting of corners. It is calculated this way: for a 4 m wall you need 1 solid plank and a 1.5 meter piece. For a 3-meter wall - 1 solid piece and a 0.5-meter piece. However, to achieve greater symmetry, you can join equal sections of baguettes in one place. But in this case, the material consumption will be much greater. For example, on a 4 meter wall, 2 pieces of 2 meters will go. This means 2 baguettes in the same way as on a 3 meter wall.

Algorithm of actions

After the tools and materials have been prepared, it is necessary to prepare the surface and the baguettes themselves. If liquid nails are used, application will be done using a syringe, pointwise, depending on the width of the baguette.

First you need to decide whether the baguettes will be glued after the walls are finished or before. Before finishing the walls, they need to be leveled. Most likely, even the most smooth walls at first glance there will be discrepancies. And if the corners are not processed, gluing will be difficult. Moreover, most likely, one or both edges will lag behind. If you carefully press them down, the material will simply go in waves due to its elasticity, which will naturally affect the accuracy of the finish. If it is not possible to fully level the walls, you need to at least level the corners. For this you can use special metal corners and putty.

To make it easier to align the corners, you need to use a level. Be sure to clean and prime the surface before further work.

After everything is prepared, you need to make markings. To do this, the baguette is applied to the wall and marks are made along the outer lines with a simple pencil.

It is advisable to cut the material using a miter box - a tool that allows you to cut at any angle. As a result, this will allow you to cut the corners evenly.

It is necessary to apply glue along the edges on both sides. Excess is removed with a soft cloth soaked in soapy water.

You can start gluing from any angle. Usually, as with wallpaper, pasting begins from the window.

You need to pay close attention to the joints, especially if there are protruding parts of the wall, columns, etc.

Holding the baguette after applying it to the wall is enough for 10-15 seconds. This time is enough for the glue to set initially.

After the baguettes are glued, you can continue finishing or do other work if the baguettes are glued to finished walls.

Summary information

In conclusion, it remains to be added that no matter what kind of wallpaper or decoration on the walls, the selection of baguette depends on the height of the ceilings. If they are at least 2.4 m, and the room is at least 7 square meters, you need to use a baguette at least 5 cm wide. At high ceilings And big room, over 15 “squares”, it is better to use a wide baguette - from 10 cm.

And one more piece of advice. There should be no haste in the selection, preparation and use of building materials. It is important to do everything consistently and carefully, then the result will meet the requirements and desires.

The ceiling is one of the most labor-intensive areas during renovation, especially when it is necessary to decorate and decorate the joints of the walls and ceiling. One of the most original and effective solutions decoration is to glue a baguette ( ceiling plinth). To install the baguette, it is advisable to use the services of finishers, but if this is not possible, then you can do it yourself. First you need to find out what a baguette is and how to glue baguettes to the ceiling.

What is a ceiling plinth

A baguette is a decorative element, a ceiling plinth, that gives the renovation a finished look and a certain style. Baguettes can easily be painted with water-based paint, so they can ultimately be different color. Ceiling plinth can have various configurations. You can easily select required type ceiling decor depending on the design and style of the room. The main thing is to choose a good glue for ceiling skirting boards and have the skills to work with baguettes.

The following is used as glue for installing ceiling plinths:

  • gypsum mixture;
  • gypsum putty;
  • plaster mixture without adding sand.

Usage building mixtures for gluing the baguette is explained by the fact that these materials can easily fill the gaps that arise between the baguette and the walls or the ceiling and the baguette.

Since modern baguettes are made of foam plastic, liquid nails (glue) are also used for their installation. Using a special construction pistol Liquid nails are applied to the surface and joints of the baguette.

Types of in-line decor

Knowing the characteristics of the material from which the baguette is made, you can choose the required type of ceiling decor:

  1. Plastic baguettes. Economy option. Durable, strong and reliable. Don't be afraid of moisture or sun rays. Universal, suitable for any style and design of the room, due to the fact that they can be different shapes and can be easily painted in any color.
  2. Aluminum baguettes. Strong, durable, but not cheap. Suitable for decorating apartments in modern style, as well as for finishing office premises.
  3. Wooden baguettes. Used when decorating rooms with classic design. Expensive and noble. In order for wooden baguettes to serve for a long time, they are treated special compounds, since wood is afraid of fire, moisture, dust and dampness.

Since it is quite difficult to glue baguettes without experience and certain knowledge, you need to learn how to cut a baguette correctly, as well as to properly trim it in the corners. To trim corners and straight sections, use a miter box - a tool designed for trimming both ceiling and floor skirting boards made from different materials.

You can use a miter box only in rooms where the angle between the walls and the ceiling is straight. As a rule, the corners in apartments are not always 90 degrees, so the corners often have to be adjusted manually.

Work order

  • Preparation. This stage is important. It includes cleaning the surface from dust and priming. The primer is used to level the surface.
  • The next stage is marking, which will facilitate the process of gluing the ceiling plinth. To do this, the plinth is applied to the corner and the part that needs to be cut is marked with a pencil. Marking is not required only if the angle between the ceiling and the wall is 90 degrees.
  • After the joints of the baguette have been adjusted, you can begin gluing the baseboard. If the room is large, it is advisable to start gluing the baguette from the corners. Excess glue should be applied to the entire surface of the ceiling plinth, which after gluing should be removed with a sponge or damp cloth.
  • If the work uses acrylic glue, then before gluing the baguettes to the ceiling, you need to consult with the seller hardware store or carefully study the instructions;
  • It is important to remember that after use silicone sealants, apply water-based paint You can't put it on the baseboard.

  1. The baguette should be glued along the intended line. Distribute excess glue along the entire length of the baseboard. Then carefully remove the unnecessary amount of glue with a sponge or damp cloth.
  2. Use a pencil to mark the desired length of the ceiling plinth, remove excess, and coat the rest with glue. Don’t forget to coat the joints of the baguette. Fill small gaps in the joints with putty and then sand the seams;
  3. To extend the service life of the ceiling plinth, paint is applied to its surface in several layers.

Paint can be applied only after the glue and putty have completely dried.

The use of ceiling plinth (baguette) in decoration immediately transforms appearance any room.

Video

Instructions for installing ceiling plinths:

7299 0 0

Baguette for wallpaper: how to glue correctly

Have you decided to glue a baguette onto the wallpaper, but don’t know how to do it correctly? I will tell you how to do the installation yourself and what you will need for this. In addition, you will learn about the pros and cons of gluing baguette over wallpaper.

Pros and cons of baguettes on wallpaper

Arguments for:

  • Baguette provides additional strength to wallpaper joints. It would seem that at the junction of the walls and ceiling, there is an additional load on the finishing. However, if the installation is done properly, the glued baguette holds the joints of the wallpaper strips together problem area– at the top, where the canvas begins to move away from the base over time.

Cons:

  • Wallpaper glue is not designed for additional load. Baguettes are installed at the junction of the ceiling and walls, and it is at this point that the glue that holds the wallpaper dries over time, and therefore the coating can move away from the base along with the baguette.
  • Gaps between wallpaper and baguettes cannot be filled. If the wall is not level enough, gaps will be visible between it and the even moldings. During normal installation, the gaps are filled with sealant, which is then painted over. When installed on wallpaper, the sealant will be visible.

So, is it possible to glue a baguette on the wall to the wallpaper? It is possible, but if you decide to install ceiling skirting boards on top of the existing finish, consider the following requirements:

  • Choosing the right ceiling plinths and glue. Skirting boards that are too heavy and the adhesive composition is not strong enough will not ensure a reliable connection to the wallpaper.
  • Installation is carried out on non-textured wallpaper. Textured coatings have a smaller adhesion area with glue compared to smooth surfaces. Therefore, installation on a coating without a pronounced relief will be of higher quality and more reliable.
  • We fill the gaps at the joints with sealant only if the finish is light.. If there are gaps between the wall and the ceiling plinth, they can be filled with sealant, which is most often white. On light surfaces, white sealant will be less noticeable, whereas on dark wallpaper it will stand out a lot.

Baguettes - what they are and what to choose

Illustrations Varieties by configuration type

Ceiling plinth. These are profiled strips that imitate stucco and are installed along the line where the ceiling and walls meet. There are solid varieties on sale and those with the ability to install backlighting.

The main distinguishing characteristic of the plinth is its width. As a rule, the larger the footage of the room, the wider the baseboard used.


Molding (border). This is a profiled plank, as in the photo, which is installed as a border in the center of the wall. Molding can be used as an alternative to ceiling plinth.
Illustrations Varieties by type of production material

Polyurethane plinth. Such products are elastic, and therefore they can be attached not only along straight walls, but also along columns and other architectural structures with a complex configuration.

The disadvantage of polyurethane baguettes is not only high price, but also more weight. Therefore, this is not the best option for installation on wallpaper.


Polystyrene foam baseboard. The advantage of foam products high density- light weight and ease of machining.

Flaw foam baseboards, in comparison with polyurethane analogues, this is rigidity and the impossibility of deformation. That is, it is preferable to glue foam baguettes along the perimeter of smooth walls.


Wooden plinth. Wooden baguettes are used extremely rarely, since the price of the products is high. Such products can only be installed on perfectly flat walls.

Wallpaper panels. These are not baguettes, but their paper imitation.

The advantage of this finishing material- cheap price and easy to stick. The disadvantage of the solution is its budget-friendly, unpresentable appearance.

What to choose from the listed options? Due to its light weight and easy installation, the best choice- these are polystyrene foam baseboards. By the way, as an alternative, you can use paper panels, the installation of which is not difficult at all.

What to glue

Illustrations Glue recommended for baguettes

Assembly adhesive on acrylic base . Such compositions are commercially represented by “Baguette glue”, “ Liquid nails" etc.

Adhesive based acrylic resins does not corrode polymer materials, and therefore suitable for installation of any ceiling plinths and borders.

Flaw acrylic compositions is that they white, which means they will be noticeable on dark wallpaper.


Cyanoacrylate glue. Such compositions include Akfix 750, Hencel Moment, Loctite 454, etc. Distinctive characteristic cyanoacrylate adhesives - they dry quickly, which simplifies the installation of skirting boards by weight.

Like acrylic adhesive, cyanoacrylate compounds do not corrode polymer surfaces, and therefore can be used for installing foam and polyurethane products.


Styrofoam glue. Installation products such as “Titan” Wild are traditionally used for gluing foam curtain rods.

After drying, the product forms a hard, colorless or transparent layer with excellent adhesive properties. Adhesive setting at room temperature, on average, occurs in 20 seconds.

Gluing technology

Illustrations Step by step instructions

Trimming skirting boards. Since installation starts from the corner, you need to trim the corner connection in advance, as shown in the diagram. For these purposes, we use a miter saw or a miter box with a hacksaw.

The proposed scheme is relevant if the angles between the walls are right. If there is curvature, the cutting will have to be adjusted with a knife.

The factory edge of foam baguettes is always deformed, so we make sure to cut the edges at a right angle and only then adjust them to the desired size.


Installation. Glue is applied to the underside of the baseboard in accordance with the type of ceiling. If the ceiling is suspended, then we apply glue to the part that is adjacent to the wall, and if the ceiling is ordinary, then we coat both sides.

We hold the prepared plinth strip for a minute, after which we put it in place. Having applied the bar, we carefully press it along its entire length, but try not to damage it.


We seal the joints. To make the joints between the pieces of plinth look solid, coat the ends of the cuts acrylic sealant and then connect with a little effort. While the sealant dries, the joint is secured with pins or toothpicks, which will prevent the seam from coming apart.

Remove excess glue. Using the corner of a spatula, we pass along the longitudinal edge of the glued plinth, removing any excess glue that has protruded. If whitish marks remain on the wallpaper, before it’s too late, they need to be wiped off with a clean foam sponge soaked in water.

Let's sum it up

Now you know what and how to glue baguettes to wallpaper. You will find more interesting information on the topic by watching the video in this article. If you have any questions or have your own thoughts on working with baguettes, write about it in the comments.

July 5, 2017

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

Until relatively recently, the joints formed between the wall and ceiling surface, covered with panels or covered this part with a thin strip of embossed paper. Today, preference is given to ceiling moldings and baseboards, which hide existing distortions and gaps much better. As a result, the room acquires a unique appearance. Using the element, you can quite easily hide existing flaws that were not removed during repair work. As practice shows, gluing baguettes to the ceiling is not difficult if you follow the recommendations of experts and carry out all the work in stages.

How to glue baguettes to the ceiling and wallpaper

As practice shows, there are several ways to install a baguette on the ceiling surface:

  • directly to the wallpaper;
  • even before work begins on finishing premises.

The advantage of the first option is the fact that it is not necessary to adjust the length of the wallpaper to the line of the ceiling molding. With the help of such a decorative element, it is possible to visually hide all existing errors on the upper edge of the wallpaper.

In order to carry out installation work correctly, it is recommended to carry out everything step by step, adhering to the following algorithm:

  1. Using a miter box, hacksaw or any other device, it is necessary to cut the edges of the baguette at the required angle.
  2. On those surfaces to which the decorative element will subsequently adhere, it is necessary to apply a thin layer of adhesive.

  3. After the layer of glue has been applied, you need to attach the product to the wall, lightly press it down and hold it in this position for several minutes. As practice shows, the manufacturer often gives recommendations for carrying out installation work using specific adhesives.

  4. If there is excess glue, it should be removed using a rag or spatula. The joints of the baguette will need to be sealed with white sealant in the future.

After the baguette is glued, you can begin to apply the finishing coloring composition.

How to glue baguettes to the ceiling

Before starting installation work, it is recommended to first think about how to glue the baguette to the ceiling surface. IN in this case excellent option is the choice of ready-made adhesive compositions. If you take into account the recommendations of experts, then there are several adhesive compositions, each of which is time-tested:

  • polymeric;
  • acrylic;
  • Silicone based glue.

Comment! When choosing a polymer option, it is worth considering that the level of stickiness is quite weak. To glue a baguette made of foam plastic to the ceiling surface, you will need long time keeping it in one position, which is very difficult, especially when the product reaches a length of 2 m.

Using acrylic and silicone glue you can install quite quickly ceiling molding. On sale you can find tubes that are designed for a pistol. It is easy to apply the composition, and thanks to the presence of a dispensing spout, you can control the glue consumption.

The most budget option is a finishing putty or glue intended for drywall. Distinctive feature This composition has an affordable price and a quick hardening and setting process. Literally a couple of hours after the baguette has been glued, you can begin painting work.

Attention! The disadvantage of putty is the difficulty of applying a thin layer of the composition to the baguette using a spatula.

Preparatory work

As a rule, they begin gluing ceiling moldings after the walls have already been leveled, wallpaper has been hung, or the surface has been painted. If the walls are uneven, they must first be leveled using putty or plaster for this purpose. Particular care is taken in leveling the surface if you plan to install moldings made of plaster and wood. It is enough to press polystyrene foam products and they will hide the existing irregularities.

It is also recommended to prepare the ceiling surface in advance, namely the part to which the decorative element will be glued. If the surface is leveled and painted, additional work no need to carry out. If necessary, the ceiling where the baguette will rest can be additionally coated with a layer of primer.

If you plan to mount the decorative element not end-to-end to the ceiling, but will provide a small margin for installation LED strip, then for convenience it is recommended to mark the bottom sizing line. To do this, small nails are nailed around the perimeter of the entire room at a distance of 3 cm from the ceiling, after which the thread is pulled. Subsequently, this line is oriented.

How to cut baguettes for the ceiling correctly

Cutting a baguette is a rather complicated process. As a rule, the main problem is not that it is necessary to cut the material under at an even angle at 90 or 45 degrees, for these purposes you can use a miter box, but the fact is that often the corners in the room are crooked and do not amount to 90 degrees. That is why, after all the work has been carried out, the cracks have to be sealed with putty.

If necessary, you can use special decorative inserts which are used to decorate residential premises. In specialized stores it is possible to find decorative inserts for external and internal corners. Before installing such inserts, it is recommended to first trim the edges at an angle of 90 degrees.

Many craftsmen use a miter box when performing work. Before decorating the corners of the room, you need to attach the baguette to the surface of the ceiling and visually determine the cut line. The fillet is placed in a miter box so that the edge of the ceiling is at the bottom. The products are held by hand and at the same time the excess part is cut off. To design the right internal corner the cut is made from left to right; for the left, the procedure is carried out in reverse.

Advice! If a gap has been formed, it must be eliminated using putty.

How to glue foam ceiling moldings

As practice shows, you can glue ceiling moldings yourself without resorting to outside help. In this case, the main thing is to ensure that all elements are installed evenly and are firmly fixed.

The work process is as follows:


The final result depends on the correctness of the work performed.

Attention! Products made from foam plastic can be painted if necessary, and they bend well.

How to glue polyurethane baguettes to the ceiling

As a rule, it is recommended to start gluing the polyurethane baguette from the corner of the room, which is located next to the entrance. It is necessary to prepare wet wipes in advance, with which you can remove excess adhesive. Glue is applied to the edges and joints of the product. After the glue is applied, the baguette is applied to the surface and pressed tightly. The pressing time can be seen in the instructions supplied with the glue. If there is excess, remove the glue with napkins.

After that decorative elements They begin to install around the entire perimeter of the room. It is necessary to measure the length of each step and trim off the excess. The corners must coincide and they should be pressed as tightly as possible. To ensure that there are no marks or dents left on the material, it is pressed with the entire palm.

How to stick a wooden molding on the ceiling

  1. The first thing you need to do is check the walls for unevenness - there shouldn’t be any.
  2. If necessary, markings are made on the surface of the wall or ceiling.
  3. After this, they proceed to preparing the first baguette - the corner must be cut.
  4. If the baguette is narrow and has light weight, then it can be fixed using liquid nails.
  5. If the material is heavy, you will have to use self-tapping screws. You can first place the wood product on glue, and then securely fasten it with self-tapping screws.
  6. When the perimeter of the room is completely processed, they proceed to eliminating existing gaps using putty.
  7. At the end, all joints are coated with paint and varnish.

Often, decorative wooden elements are attached to special wooden corners.

How to properly glue gypsum moldings to the ceiling

Before installing gypsum products, measure the room and cut baguettes to the required length. It is important to ensure that the corners are cut straight.

After everything is prepared, it is necessary to apply it to one of the sides of the material that will be adjacent to the wall. thick layer finishing putty. After that plaster product tightly applied to the surface of the wall and ceiling. If there is excess putty, remove it with a spatula.

Conclusion

Gluing baguettes to the ceiling is not as difficult as it might initially seem. All work can be done independently if you adhere to the recommendations and strictly follow a certain algorithm.

The idea of ​​a good repair is rapidly changing with the advent of new design ideas and techniques. Previously, the pinnacle of craftsmanship was considered to be evenly pasted wallpaper with a correctly selected edging in the form of a multi-colored paper strip, and sometimes even an ordinary tape. Today high quality finish walls and ceilings is impossible without the use of baguettes. Agree, correctly combining two planes into a single ensemble is a guarantee of comfort and beauty in the room. In this article we will look at how to properly glue baguettes to the ceiling so that the renovation looks complete.

Baguettes in the interior emphasize the sophistication of the room design.

Using baguettes in the interior

The material has several significant advantages:

  • allows you to hide visible defects in walls and ceilings - unevenness, roughness, differences;
  • decorates the junction of the wall and ceiling;
  • easy to install, does not require special skills;
  • lightweight and flexible material;
  • rich design choice;
  • allows you to significantly save money due to its affordable price.

Before choosing a ceiling molding, you should know that it can be made from various materials, be different in texture, width, be smooth and patterned. Not only the price depends on this, but also its purpose, features of use for different interiors.

Baguette, also known as molding, ceiling plinth or frieze, can be made of foam, polyurethane, plastic, wood or plaster. The first two types of baguettes are most often used; plastic ones, for example, are used only for suspended ceilings, and wooden ones - in conjunction with the same ceiling.

Wooden baguettes fit perfectly in an interior that already has wood.

Surface and tool preparation

In order for the ceiling plinth to stick well and hold securely, you need to properly prepare the surface and prepare the glue. Professional builders They believe that there are two ways to glue baguettes. The most common and proven method is when ceiling skirting boards are first glued, all gaps and differences are eliminated, and then wallpaper is glued. Some masters apartment renovations glue baguettes on top of the wallpaper, although this method is more complicated, because it will be difficult and inconvenient to treat gaps and unevenness with putty.

In order for the baguettes to stick well, you need to treat the surface. First you need to remove roughness and unevenness using sandpaper, then be sure to clean the ceiling and walls from construction dust, and then treated with a special primer.

The success of gluing baguettes depends on their availability and quality. Professionals advise having the following tools with you:

You will also need a foam sponge, an adhesive mixture, and finishing putty. Armed with everything you need, you can safely begin gluing baguettes to the ceiling.

Step-by-step instruction

Correct marking and cutting of baguettes

Before gluing baguettes to the ceiling, you need to calculate required amount strips so as not to have to look for what’s missing or throw away what’s unused. The calculation is simple: calculate the perimeter of the room (help here school program for 2nd grade). We divide the resulting number by 2, since this is standard length ceiling baguettes. For defects and trimming corners we throw 2-3 strips. It should be remembered that in visible places it is advisable to use solid strips of baguettes so as not to spoil general form in small pieces.

Now you know how to properly glue baguettes to the ceiling. But remember that the material must be cut correctly. To prevent the pancake from being lumpy and a good half of the materials ending up in the trash, it is better to use a special device for cutting baguettes - a miter box. With its help, you can make a corner joint almost perfect, because in ordinary apartments Perfectly smooth walls and ceilings are rare.

You can cut baguettes evenly and accurately using special device- miter box

No miter box - no problem. We offer step by step instructions for cutting baguettes without using a miter box:


How to glue baguette to the ceiling

You can glue the ceiling plinth using finishing putty or special glue.

  • Finishing putty

If you chose the first option, then the mixture must first be prepared. The procedure is simple: pour putty into a container with water and mix with a mixer. Some people add a little PVA glue to increase strength.

Then the mixture is applied to the edges of the baguette in an even layer using a spatula. The plinth is placed between the ceiling and the wall and pressed. Using a spatula and sponge, remove excess putty and cover cracks, irregularities, and joints.

  • Adhesive compositions

Most often, polymer adhesives such as “Titan”, “Moment”, or so-called liquid nails are used for gluing baguettes to the ceiling. The disadvantage of these compounds is that they smell unpleasant and are afraid of moisture. In order for the baguette with the applied adhesive to “grab”, you need to press it against the wall and ceiling for several minutes. The glue will hold the baguette securely for a long time, but it will not be possible to mask the joints, cracks and irregularities.

Sticking under a suspended ceiling

Many people have a question about gluing baguettes under suspended ceiling causes fear and certain difficulties. But the wolf is not as scary as it is painted. The procedure has its own characteristics, which you will now get acquainted with.

The features of gluing baguettes under a suspended ceiling are as follows.

  1. Cutting should be done not under the ceiling, but on the floor, so as not to damage the film
  2. The baguette is glued only to the wall, so the adhesive solution is applied only to one side that is in contact with the wall
  3. A strip of paper is inserted into the gap between the baguette and the suspended ceiling, and then the baguette is painted.

Baguettes look natural under a suspended ceiling.

By adopting all the tips presented, you can easily solve the problem of how to glue baguettes to the ceiling without extra costs. Good luck with the renovation everyone!