How and with what to effectively remove limescale in the toilet. How to remove and remove limescale from a faucet - the best products Pastes and brushes for removing plaque without harming the enamel

Any plumbing that comes into contact with tap water, inevitably becomes covered with various deposits. The sink is the most vulnerable in this regard, since it constantly evaporates cold and hot water with detergents, food debris and other substances dissolved in it.

We will tell you how to clean your sink from limescale most effectively.

Limescale

Causes

One of the most common types of contamination on the surface of sinks and bathtubs is the deposition of mineral salts of lime origin.

Since most apartments and houses are connected to centralized system serving cold and hot water, the problem can be considered universal and ubiquitous.

The main cause of lime deposits is the high hardness of the water supplied to the water supply. What does this mean?

Water hardness is a set of chemical and physical properties directly related to the content of so-called hardness salts, or alkaline earth metal salts, in water. Mainly, we're talking about about calcium and magnesium compounds.

During the interaction of water with the surface of the sink, as well as as a result of chemical processes of interaction with detergents, food residues and other chemicals, some of the salts dissolved in the water settle on the surface of the plumbing fixture. After drying, these sediments turn to stone, forming a hard, opaque coating of white or gray.

Over time, the layer of sediment can grow to an impressive thickness. Sometimes limescale covers drains or tap holes, but even in less neglected forms it spoils appearance plumbing and deprives it of its usual shine and beauty.

Important! In addition to the aesthetic damage that a limescale layer causes to plumbing fixtures, it can also become an environment for the development of harmful and pathogenic bacteria, mold and other unwanted microorganisms.

Cleaning methods

So, we are convinced that the problem of lime deposits is relevant for almost all plumbing fixtures, and sinks are at particular risk. Now we will tell you how to get rid of limescale on your sink.

The principle of fighting deposits is simple and based on chemical properties salts that form plaque. These salts are alkaline in nature, and therefore interact with acids, which, as a result of the reaction, neutralize and decompose deposits.

You can use the following tools:

• Acetic acid. This is the most common reagent in everyday life, which is quite safe for health and is as accessible as possible. You can use either a form diluted to 9% or an essence, but it is better to dilute the concentrate to avoid burns and damage to the enamel;
• Lemon acid. It is also a completely accessible and widespread substance, but it is even safer and has the mildest effect. Usually the powder is applied to a dampened rag and rubbed onto the surface: this achieves a double effect - chemical and abrasive;
• Ammonia or ammonia. Sold in pharmacies, the price is affordable for everyone. It has a whitening effect, but has a strong unpleasant smell, which can harm the mucous membranes of the nose, throat and eyes.

Depending on the degree of contamination, one or another acid is selected. The most gentle and harmless is lemon acid. For more persistent deposits, it is better to use vinegar, and to increase activity it can be heated to 40 - 50 degrees.

The cleaning procedure is simple: moisten a sponge in the prepared solution and apply it to the contaminated surface, rubbing thoroughly. Leave the sink like this for 30 - 60 minutes, then rinse the solution together with cold water.

Important! When working with acids, hands should be protected with rubber gloves, and the solution should not come into contact with the eyes or mucous membranes. If acid damages your eyes or skin, wash it off big amount running cold water.

Rust and other types of dirt

In addition to salt deposits, yellow and brown spots. These are contaminants left by rust. They arise as a result of corrosion, as well as due to iron particles and salts dissolved in water.

You can get rid of rusty deposits using vinegar.

However, for greater effectiveness, it is better to use combined products that are easy to prepare with your own hands:

1. Option one is a mixture of 9% wine vinegar with table salt. Add half a tablespoon of salt to a glass of vinegar and heat to a temperature of 50 - 60 degrees. We close the drain hole of the sink with a stopper and pour in the solution, wait half an hour or an hour and then wash it along with the rust into the sewer;
2. Option two- This is the use of soda and vinegar. First apply a layer of paste soda (baking soda + warm water), then, after 15 minutes, spray with vinegar from a spray bottle. Wait half an hour and wash off with cold water.

Limescale is calcium carbonate. It remains on the surface when water evaporates from it. Over time, mineral deposits accumulate to form white crystals. Such deposits on faucets, faucets and shower heads look unsightly and irritate housewives, as they are difficult to deal with.

But with this genius trick cleaning bathroom fixtures and other surfaces will not be difficult for you. Everything you need is in your home. And all this without an expensive household chemicals!

Removing limescale

You will be surprised, but these are terrible calcareous deposits can be easily cleaned.

Just take any cotton fabric. You can use an old T-shirt. Pour white vinegar into a bowl. If desired, dilute a little with water. Leave the cloth in the bowl for a few minutes.

Place the rag, without squeezing it, on the contaminated areas for half an hour.

Then use a washcloth to wipe the area where the rag soaked in vinegar was.

If necessary, the procedure can be repeated.

At the end of such cleaning, the tap and mixer will shine like new. Amazing effect without any chemicals!

Delete limescale no problem and extra costs. This idea is worth its weight in gold.

Share this important information with friends on social networks!

READ ALSO

The appearance of limescale on the tap occurs due to the heating of the water. Gray salt stains may appear on the surface of the equipment - this not only spoils the appearance of the faucet, but can also adversely affect its suitability for use. Deposits can accumulate inside, making the device difficult to operate.

From time to time it is worth cleaning the elements from water stone. By choosing the right cleaning products, you can remove limescale from the faucet in a timely manner and return the equipment to a pleasant appearance.

When choosing a cleaning product, you need to pay attention to options that will help remove solid deposits and will not harm the coating of the equipment. Such substances should not contain alkalis or abrasive elements that have an aggressive effect on the material.

In almost every apartment you can see white coating on plumbing equipment. The reason for its formation is the large amount of magnesium and calcium in the liquid. When contacted with plumbing fixtures, taps, substances are deposited on the surface in the form of cloudy white scale. Without high-quality regular cleaning, plumbing gradually becomes clogged and becomes unusable.

To get rid of unsightly plaque, cleaning activities should be carried out by following some rules:

• You should not use hard metallic sponges for cleaning - the resulting scratches will no longer be able to be removed.
• When choosing a product, give preference to gentle options that do not contain abrasive additives. They will help clean the faucet without damaging the surface.
• If the product contains acids: hydrochloric, sulfuric, phosphoric, etc., it is better to avoid using it. During surface treatment plumbing equipment Such substances can cause dark stains and difficult-to-remove rust.
• It’s better to ask the store for a special product that helps remove plaque from the exact material your taps are made of. This will help avoid mistakes.

Removing scale and rust from the tap - video:

If plumbing fixtures become damaged, they will need to be replaced - this often results in significant costs. Therefore, it is better to carry out timely prevention using proven compounds. If you don’t want to remove limescale from the faucet from time to time, it is recommended to thoroughly wipe the faucet with a dry cloth after each use. Many people prefer to use home remedies to clean their faucets.

The following products help to remove plaque from surfaces:

• table vinegar;
• laundry soap;
• lemon acid;
• baking soda.

These are the most common options for home remedies, each of which has various methods cleaning.

How to remove plaque from plumbing using soda

1. Place a few tablespoons of baking soda into a suitable cup, then mix with water to form a semi-liquid paste.
2. The composition must be applied to the mixer and all surfaces that need cleaning.
3. Leave the soda mixture on these places for about an hour, then wipe everything with a piece of soft cloth without using force.
4. If stains remain, remove them with a dish sponge without wetting it with water.

To apply the soda mixture to the surface where there is a white or green coating, you can use a damp cloth, a soft sponge, or old toothbrushes with bristles that have lost their stiffness. The mixture should not have lumps - to do this, after pouring water into the soda, stir the resulting mixture several times so that the powder disperses properly.

How to clean a faucet using laundry soap

To remove plaque from plumbing fixtures, you can take advantage of the wonderful properties laundry soap.

You should do this:

1. Grate a piece of laundry soap on a coarse grater.
2. Spread the shavings hot water until a medium consistency is obtained.
3. Add a little soda to the resulting mass, you can take soda ash.
4. Using a piece of soft cloth, apply the mixture to the areas that need cleaning.
5. Wait about an hour, then rinse off the soap with warm water.

The soap solution prepared in this way has a lot beneficial properties. It helps get rid of salt stains, clean the faucet from scale, and deal with other types of contaminants. Many housewives with many years of experience, to clean absolutely everything kitchen surfaces use only soda and laundry soap, or combinations thereof.

Cleaning with citric acid

Lemon can provide quite effective result. It is not recommended to use powdered acid - if large particles come across that can provide an abrasive effect, they are likely to damage the surface of the faucet in the bathroom or kitchen.

1. To treat the surface, take a whole lemon and cut it in half.
2. The juice will not be useful - you can immediately squeeze it into a bowl for use in cooking.
3. Rub half a lemon over all chrome surfaces and leave it like that for a while.
4. After about half an hour, wipe the treated areas with a dry cloth.

The main convenience of home remedies is that they can be prepared from ingredients that are available in every kitchen. But in case of serious contamination, as well as when it is necessary to clean the inside, it is better to use options with household chemicals.

Chemical Cleaners

Sometimes, using home remedies is not enough to remove plaque. Then it’s worth purchasing a suitable cleaning mixture from a household chemical store. In order to erase salt stains or clean off rust, special cleaners and polishes are used. To get a quality result, it is better to purchase both.

Most detergent compositions are used not only to clean the faucet - they are suitable for working with the sink and stove, for caring for other surfaces made of of stainless steel. Most packaging is equipped with a special dispenser, so there are no problems during application.

They are especially convenient to use when treating hard-to-reach areas, for example, around the tap and handles, and the drain hole.

We clean the faucet from plaque using special means - video:

Some of the chemical compositions are created when processing on surfaces thin film. It protects against plaque and the surface retains its attractive appearance longer.

The condition of the toilet over time will depend on how carefully it is used. This plumbing fixture needs to follow the recommendations for its operation, so as not to worry later about how and with what to remove limescale deposits in the toilet. Quite often on internal walls In the bowl, urinary stone also settles.

Causes of deposits

On the toilet rim and in drain hole Deposits may appear due to infrequent cleaning. Another reason for this is the irregular flushing that occurs in families with children. Untimely flushing of water causes urine on the walls of the toilet to turn into mineral deposits. Its density increases over time, resulting in the formation of stone. It will not be possible to remove it with just a brush; household chemicals are unlikely to help with this either.

Excessively hard water with the appropriate chemical composition can cause limescale deposits. To prevent plaque from forming, the toilet needs to be cleaned from time to time. by special means and take care of water softening. The reason for the build-up of lime and urinary stone damage to plumbing appears. These defects arise due to improper use. For example, if you pour hot liquid into the bowl of the device, small cracks will appear on its walls, around which plaque will form.

Cleaning and type of coating

If you are faced with the question of how to remove limescale in the toilet, you should think about the type of coating on the plumbing. In the production of such products, glaze with different coatings, which can be:

• water-repellent;
• anti-mud;
• antibacterial.

These materials have their disadvantages. When using hot liquid, the coating cracks, which spoils the appearance of the device and becomes a source of bacteria. Although the material is resistant to external influences, it can suffer from acids.

When you are faced with the question of how to remove limescale from a toilet, you should not use abrasive powders or hard scourers, because this is unlikely to help. In advanced cases, when the contamination is significant, it is necessary to think about the use of expensive means. A rational option sometimes it becomes a matter of purchasing new plumbing fixtures.

Using household chemicals

If you want to clean plumbing fixtures that have become overgrown with sediment, you should remove the water from the bowl. To do this, you can use a glass with a handle or a plunger. Afterwards you need to use detergents, which are applied to the walls and left for about an hour. If necessary, the composition is re-filled, and then removed with a brush along with the plaque. If there are old deposits on the surface, more serious compounds should be used.

Limescale removers like Pemolux abrasive powders are easy to use. Water is scooped out of the plumbing and the powder is spread over the surface. It will be necessary to act mechanically on the bowl until the surface becomes ideal. This task is quite tedious. Another disadvantage of the method is the loss of smoothness of the walls of the toilet. As a result, the coating becomes overgrown with microcracks, where dirt begins to accumulate.

Cleaning the toilet from urinary stones can be done alkaline agents. This should include Domestos and “Whiteness”. The composition contains a solution of caustic soda, which removes stone. Its remains can be dealt with using a brush and water. The water is first drained, the solution is applied to the dirt, and after half an hour it is washed off. The procedure can be repeated twice if necessary.

Alkali effectively corrodes urinary stones and limescale. During the work, the tank is closed, which is especially true when there is a leak. Acid-based products operate on the principle of alkaline compositions. One of them is Silit.

Use of folk remedies

If you are thinking about how to clean the toilet from limescale, you can use folk remedies. Helps in the fight against stones regular vinegar. A glass of liquid should be heated to 40 °C and a certain amount should be added to the container. baking soda and medical iodine.

The mixture is poured into the toilet and left overnight, thanks to which the stone completely dissolves. When housewives think about how to clean the toilet from limescale, they often resort to using citric acid. Using this product you can remove stone and plaque. Two packages of powder will be enough. The product is poured into the bowl and the lid is closed. After 3 hours the stone will dissolve. You will only have to remove it, repeating the procedure if necessary.

As alternative solution oxalic acid appears. Its technical variety is sold in powder form. Before using it, you should read the instructions to comply with safety precautions. Rubber gloves should be used. The powder is applied to a damp cloth, which should be used to wipe the areas covered with plaque and urinary stones. If you wish, you can dissolve the acid in the bowl of the plumbing fixture and leave it for an hour. In this case, you will need a little more powder.

Once cleaning is completed, the plumbing fixtures are flushed. If you are still deciding how to remove limescale from your toilet, you can use an electrolyte. This method is most effective in the case of old stains. When performing the procedure, you must use a respirator, safety glasses and rubber gloves. The electrolyte is poured very carefully, it is important not to splash it. This product is not suitable for plastic pipes.

Strong chemistry in the fight against deposits

Before you begin the procedure of cleaning the toilet using strong chemicals, you must read the instructions. There you can find out how much of the drug should be used at a time. It is also important to observe the duration of action. A person needs to protect the respiratory and visual organs, as well as the skin of the hands from accidental contact with alkalis and acids.

Before dissolving limescale in your toilet, you should consider whether the product is suitable for a home where the pipework is made of plastic. Such compositions should not be used for local treatment plants such as septic tanks. This applies to liquid alkalis and acids. An example is phosphoric acid in the form of a 7% solution. It can be used to clear stones from the toilet and also free up internal components. cistern from corrosion.

To use, pour 100 g of solution into the tank and toilet. After 15 minutes, the water is washed off and the surface is cleaned with a brush. The acid is affordable and does not affect plastic, rubber and enamel. Before you clean the toilet, you must choose a product. One of them is a solution of hydrochloric acid. This composition is very strong, so it requires some caution. Inhaling vapors is prohibited, and hands must be protected.

The walls are wiped, and then the acid in the amount of one glass is poured into the bowl. In 15 minutes you can rid your plumbing fixture of dirt. After pouring the mixture, the lid is closed. This product is not suitable for toilets connected to plastic pipes.

Use of chlorine

Chlorine is an excellent toilet cleaner. Based on it, many formulations are produced, which should include “Whiteness”. Chlorine-containing preparations are detrimental to health, so their use recently is not recommended. But if you still decide to do this, then the composition must be applied to the surface, and after an hour, clean the toilet with a brush and rinse the bowl.

Tank tablet

When choosing a toilet cleaner, you should pay attention to the tablets that are placed in the tank. They act as a plaque remover and are suitable for preventing urinary stones. These products have a pleasant smell, disinfect and disinfect the surface of plumbing fixtures, extending their service life.

One tablet is placed in the tank. As soon as it begins to dissolve, the water will turn a different color. If the coloring pigment disappears, this will indicate the need to add a new tablet to the tank.

Using soda

If you are planning to clean the toilet from urinary stones, you can also use by unusual means. For example, Sprite or Coca-Cola. This folk recipe appeared quite recently. It involves pouring one or two bottles of the drink into the toilet bowl. These liquids contain citric acid, which quickly corrodes deposits.

Finally

Plaque in the toilet bowl can appear due to irregular cleaning. You can reduce its likelihood or even avoid the formation of a stone using simple tips and funds. It is important to eliminate water leakage from the cistern. In some cases, it is enough to adjust the float.

If desired, you can use tablets, thanks to which deposits will not form, and the plaque on the walls will partially dissolve. We remove limescale and rust from the toilet every week using special products. To do this, the gel is applied to the surface and washed off after 30 minutes.

For washing chrome coatings and accessories in the bathroom, they use not only folk remedies, which saved our grandmothers, but also household chemicals. Before choosing a product, it is recommended to carefully study the label: make sure that the substance does not contain abrasive particles and alkalis, which negatively affect chromium. We propose to take a closer look at the issue of cleaning taps, chrome-plated plumbing fixtures, aerators using improvised means and industrial chemicals.

White water deposits can be seen in almost any bathroom. He appears from high content calcium and magnesium in water. When it gets onto taps and plumbing fixtures, it is deposited in the form of a cloudy white scum. If you do not clean it in a timely manner, your plumbing may become clogged and become unusable.

If in the case of a shower head or faucet aerator the housewife can solve the problem herself, then difficulties arise when cleaning chrome surfaces. Such coatings must be cleaned with care. It is recommended to follow the following rules when washing them:

1. Do not use metallic hard sponges to clean taps and plumbing fixtures. The resulting scratches will be impossible to remove.
2. Picking up chemical agent or folk method cleaning, do not use abrasives that damage the surface.
3. If household chemicals contain hydrochloric, sulfuric or phosphoric acids, do not use this detergent. The consequences after it are as follows: the appearance dark spots, as well as rust, which will be difficult to remove.
4. You should not mix several cleaning compounds at once yourself - there is a high risk of damaging the chrome coating with such combinations.
5. Ask your store consultant about special detergents for chrome. It is better to choose a substance, even if it is more expensive, but intended specifically for a specific situation.

Damaged plumbing fixtures wrong choice the funds will have to be replaced, which will result in large costs. At the end of the article, a recipe for a composition will be presented that will help restore chrome products for minor scratches.

Traditional methods for removing limescale

In order to spend less time cleaning faucets from limescale, it is recommended to wipe the products with a dry cloth after use. Most housewives forget to perform this procedure, and return to the problem only when scale has already firmly established itself on the plumbing.

Among the home remedies that do an excellent job of removing plaque are the following:

• baking soda;
• laundry soap;
• table vinegar;
• lemon acid.

We suggest considering the cleaning recipe using each of these methods in more detail.

Take a few spoons of baking soda and dilute it with a small amount of water. Apply the resulting slurry to the surface of the tap, and also treat other chrome coatings. Leave the mixture for 1 hour, then carefully remove any remaining product with a soft cloth. If you find small stains, gently rub them away. reverse side dish sponges.

Apply the soda slurry using a soft sponge, damp cloth or toothbrush. You should not use steel wool, and make sure that the resulting mixture does not have visible abrasives. To do this, after preparing it, leave the soda for 5 minutes so that it dissolves in the water.

The hypoallergenic and disinfecting properties of laundry soap have been known for a long time. It will also easily help remove the resulting white deposits on plumbing fixtures:

A soap solution helps to deal with many contaminants, including scale. Experienced housewives can confirm that you can actually clean all surfaces in the bathroom and kitchen with laundry soap.

To remove mineral deposits on the faucet, you can use either a 9% table composition or Apple vinegar. The recipe for the product is simple: mix vinegar with water in a 1:1 ratio. Take a cloth and wet it with the resulting liquid. Apply the substance to the plumbing fixtures and wait a little. Vinegar acts instantly, which is why it is a favorite cleaning agent for housewives in any situation.

Wipe all taps and showers in the bathroom and kitchen with a soft cloth. If stains from dried soap are noticeable here and there, wash them off with water.

Another way to get an effective result is lemon or citric acid. It is absolutely not worth using it in dry form: large abrasive particles can easily damage the surface of taps and showers.

To treat a faucet with acid, do the following:

1. Pour a little product into the container.
2. Add a couple drops of water.
3. Without adding water, you can dip a damp cloth in dry acid and wipe the surfaces with it.

Besides, natural spring acids - lemon, copes with the task no worse. Take a whole lemon and cut it into 2 parts. If processing is expected large quantity area - both halves will be useful. Squeeze a little juice into a container - you won't need it, it can be used for culinary purposes. Rub half a lemon over all chrome-plated items and leave for a while.

After treatment, wipe the taps and plumbing with a clean, dry cloth and enjoy the results.

Home cleaning methods are good because they involve the use of available means available to any housewife. If the above methods do not help, and the stubborn plaque does not go away, we suggest using household chemicals.

Anti-plaque chemicals

All chemical compositions pose some danger to human skin, so before use, be sure to wear rubber gloves, and if necessary, a face mask. Some products cause allergies; read the label and manufacturer's recommendations before purchasing.

Today, household chemical stores offer whole line products for chrome and steel products. They are divided into 2 types:

• Cleaners – help get rid of contaminants.
• Polishes - used at the final stage of cleansing.

To make cleaning your taps faster, purchase both products together.

Among the cleansing compositions, the following well-known effective agents can be distinguished:

Among the polishes, we can separately highlight the popular products “Domax” and “Indesit”. The latest brand specializes in the production household appliances Therefore, the compositions offered for polishing plumbing fixtures meet all standards.

These products are used not only for chrome taps. They have also proven themselves excellent in cleaning stainless steel surfaces - sinks, stoves, furniture fittings and even dishes. The compositions are easy to apply: most of them have a dispenser nozzle, with which the substance is sprayed onto the product.

Following the manufacturer's instructions, the product is left for some time to penetrate the pores of the material, after which it is wiped dry, removing any residue. Polishes are used after cleaning: they process products to a mirror shine.

Some detergent compositions create an invisible film on the surface of the product, protecting the plumbing fixtures from plaque. Glass cleaner can also produce a similar, although not long-lasting, effect. Before treating the surface, check the label to ensure that it does not contain alkalis or acids.

Stuck faucet: how to get out of the situation?

When the faucet or mixer switching the water to the shower is not used for a long time, it may jam. The cause of such a breakdown is often a deposit of water stone, which can be dealt with as follows:

1. Clean the faucet using one of the above remedies or traditional methods.
2. If this method is not suitable, let's turn to another. Take vinegar and dilute it with hot water. Dip the prepared rag into the solution so that it absorbs the product. Wrap a cloth around the jammed faucet, then wrap it cling film. This is done so that the vinegar does not evaporate, but saturates the plaque deposits well and removes it.
3. Another method that any housewife can handle is using universal remedy WD-40. It can be used to fix many problems, and a stuck faucet is no exception. Spray the joint between the tap and the mixer with the product and wait a while. The substance can be purchased at any hardware or automotive store.

If the proposed methods do not help open the tap, you will have to call a plumber. In the future, to prevent such situations, promptly clean the gaps in the taps.

It also happens that the surface of the faucet is cleaned, but the internal parts become clogged due to the deposits that have formed. Most often, the mesh nozzle that sprays water, the aerator, suffers. It serves to enrich the water with oxygen and ensure its uniform flow. An aerator is a useful faucet element that performs the following functions:

• reduction of noise level due to the formation of small bubbles;
• reduction of droplet splashing;
• significant water savings;
• filtering small particles of debris.

When an aerator becomes clogged, all of its intended functions are lost. Often this part becomes covered with lime flakes, causing the holes to no longer cope with the task. Such blockages are characterized by the fact that when the tap is fully opened, water flows slowly and does not spray. In this case, the element must be cleaned:

1. Unscrew the faucet nozzle: to do this, wrap it soft material and use pliers to turn clockwise.
2. It is important that the aerator is made of steel, in the case of plastic part there is a high risk of it breaking when removed.
3. To unscrew a jammed attachment, you can use the above method using WD-40.
4. Rinse the tap hole with water.
5. Place the aerator in the vinegar solution for several hours.
6. The holes in the aerator must be additionally cleaned with a needle.
7. Screw the cleaned element back into the tap. It is better not to tighten the fastener too much, so that you can remove it and clean it at any time.

If you have difficulty unscrewing the aerator, contact a plumber.

Cleaning plumbing fixtures

In addition to cleaning chrome taps, other plumbing fixtures also require cleaning: shower heads, darkened areas of appliances, as well as buttons on the toilet, cabinet fittings.

For cleaning, improvised means are also used, and if they fail, household chemicals come to the rescue.

Cleaning the shower head

It is important to clear clogged holes in the shower head in a timely manner, before they are completely covered with lime flakes. To do this, try to disassemble the shower head. Soak the parts that were removed from the structure for 2 hours in a heated vinegar solution. After this, rinse them with water to remove the odor.

The hydromassage nozzle itself must be cleaned using a needle. It is also recommended to use some chemical compounds and clean the injectors with a toothbrush.

Unfortunately, it is often impossible to restore damaged chrome plating. However, there is a tool that helps hide cleaning mistakes. For this purpose it is used special composition for polishing metal parts of a car, including Goi paste. You can purchase such substances at any auto store, having previously consulted on this issue.

Another method of bringing chrome coatings to a shine is the use of car wax shampoos. They create a water-repellent film on the coating and protect the material from corrosion.

Don’t forget about timely cleaning of chrome taps, and then you won’t have to think about finding suitable products.