Branch chopper Russia for walk-behind tractor (belt drive). Types of garden crushers for a walk-behind tractor for chopping branches Buy a garden branch chopper for a walk-behind tractor

Well maintained area always attracts the attention of strangers with its cleanliness and order. However, not everyone thinks about how much time and effort is required to bring a large territory to an idyll. Various attachments on the walk-behind tractor, and in particular the branch chopper, play a big role in this matter. This is what we will talk about today.

How to choose a branch chopper for a walk-behind tractor and not regret the purchase?

A branch chopper, or wood splitter, is a special functional attachment for processing grass vegetation and branches. The recycled material will serve as a good fertilizer for the garden.

The purchase of a shredder should be well thought out, since the cost of this equipment is by no means small.

Criteria for choosing a wood chipper for a walk-behind tractor:

1. Engine type. It comes in electric and petrol versions;
2. The power of the wood chopper is very important;
3. Funnel diameter;
4. Type of crushing system;
5. Methods for processing garden waste;
6. Equipment weight;
7. Nozzle functionality.

Electric walk-behind crushers are less noisy than gasoline ones and are also easy to maintain. However, their operation is affected by power surges in the network, and the maximum diameter of branches that they can process is 45 mm. Gasoline wood shredders differ from the former in greater power, which allows them to process almost any waste.

The crusher for the walk-behind tractor is very necessary thing in any household, but it is very expensive to purchase. However, there is a way out in this situation, namely to do it yourself. The work, of course, is not easy, but the result will please you very much.

Advantages homemade console to the walk-behind tractor of this type the following:

• any number of knives can be installed;
• equipment power;
• low cost.

The design of the chopper is not complicated and consists of the following elements:

1. Metal frame;
2. Gasoline or electric motor;
3. Cutting mechanism;
4. Hopper for feeding and unloading material;
5. Main gear.

A self-made branch cutter for a walk-behind tractor looks like a cutting mechanism mounted on a frame. Photos of the equipment are shown below.

Materials required for manufacturing: knives, pulley, bearings, a metal sheet, shaft, channel, fastening material.

Tools you can't do without: hammer, drill, welding machine, grinder, set of tools, pliers.

The sequence of work for the manufacture of a branch chopper:

• We take a channel, an angle and a pipe and make the base for the frame. Then we weld the frame;
• a package of saws and washers must be placed on the shaft of the cutting unit;
• then we put the bearings on both sides of the shaft;
• screw the pulley onto the longer end of the shaft;
• using bolts and nuts we fasten the shaft to the frame;
• a small diameter pulley must be installed at the end of the shaft;
• Next, you need to attach the motor to the frame so that the pulleys are located on one side;
• We put a belt on the pulleys, the tension of which can be adjusted by moving the motor;
• It is necessary to make blanks from steel to protect the casing and hopper;
• We weld the resulting workpieces;
• using fasteners, the casing and hopper must be attached to the frame;
• We connect the resulting product to the motor and check its performance.

A self-made grass and branch shredder for the Neva walk-behind tractor will become an indispensable assistant in cleaning local area and vegetable garden. In addition, the recycled material can be used as fertilizer and as heating for the home.

If you are a client of the Garden Mechanisms online store, then you can use the service of qualified pre-sale preparation of equipment. It is implemented on the basis of our own Service Center, which is authorized and certified by the world's leading manufacturers.

How the equipment starts in operating mode determines its further operation. In our case, an experienced employee Service center will produce trial run on Idling. Especially for our clients, we will adjust and configure the equipment so that it is ready for the upcoming loads. After this, if the results of the check do not raise any complaints, the instrument is sent to its rightful owner.

What are we doing?

• checking the contents (when opening it is checked whether everything is in place)
• assembly finished product(if necessary)
• checking adjustments
• refilling equipment with oil
• lubrication control in gearboxes and gearboxes
• product launch

Everything for the Client

• Once the instrument is unpacked for pre-sale preparation, it is handled by a professional. Therefore, we can guarantee the quality of our services.
• You receive equipment that is 100% ready for use.
• Proper commissioning is excellent results in the future.

Important

When making a purchase of gas-powered tools, the managers of the Garden Mechanisms online store offer everyone a pre-sale training service. If you wish, you can refuse this service.

In what cases are pre-sale preparations abandoned?

• If you wish, receive the product in the original packaging and open/assemble it yourself.
• If the product is intended to be given as a gift and traces of equipment operation are undesirable (remains of fuel in the tank, filled with oil, opened packaging).
• In case it is expected to be transported further, which is impossible with the product assembled. For example, it is assumed that the goods will be sent via transport company or by mail, or further transportation is planned by transport, where the assembled product does not fit in size.

Cost of pre-sale preparation

The price includes: unpacking and checking the package (when opening, check whether everything is in place), assembling the finished product (if necessary), checking adjustments, filling equipment with oil, refueling, checking lubrication in gearboxes and gearboxes, starting the product. Oils and lubricants are not included in the cost of equipment assembly.

Gasoline is poured minimum quantity. Approximate cost Product assemblies can be viewed in the table. The cost depends on the complexity of the assembly and the time spent on it. Please check with the manager when placing your order for conditions, terms and exact amount of assembly/pre-sale preparation. Free pre-sale preparation applies only to all products of brands and. The products of these manufacturers are marked with a special “Free pre-sale preparation” badge.

Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and complexity of the work. Please check with our managers for the timing and cost of this service.

Every summer resident and gardener loves his plot to always be clean, and to make it convenient and easier for a summer resident to maintain order, he needs a branch shredder. A chopper for branches, also called a wood splitter, for a walk-behind tractor is a specialized, functional attachment for processing grass and branches. Shredded branches processed into sawdust are also good fertilizer for your garden.

Criteria for choosing a wood chopper for a walk-behind tractor

If you decide to buy a chopper for a walk-behind tractor, you should know what criteria to choose:

• engine type;
• unit power;
• funnel diameter;
• type of crushing system;
• what types of garden waste does it process?
• chopper weight;
• functionality.

The main thing is to focus on the blade system (disc or milling) and the type of engine (electric or gasoline).

Electric shredders are quiet, easy to maintain, but sensitive to power surges, and process branches up to 4.5 cm in diameter. Gasoline engines are powerful, process virtually any waste, but are noisy.

A branch chopper for a walk-behind tractor is a good thing, but not everyone can afford to buy it. Therefore, the optimal solution is to make a shredder for cuttings and herbs with your own hands. This is certainly not easy work, but it is worth it.

There are many advantages to a homemade branch chopper: the ability to independently choose the number of knives needed for work; the power of the unit, the diameter of the branches and, of course, the low price.

The design, if understood correctly, is quite simple. The grinding apparatus consists of:

• steel frame;
• gasoline engine or electric motor;
• cutting mechanism;
• bunkers for feeding sticks and unloading wood chips;
• main gear.

A hand-made branch chopper for a walk-behind tractor is cutting mechanism, fixed to the frame.

Materials for production: knives from an electric planer, pulley, bearings, sheet metal, shaft, channel, bolts, nuts.

Tools: hammer, drill, welding, grinder, set of wrenches and pliers:

1. We make the base for the frame from a channel, angle and pipes.
2. We weld the frame.
3. We put a package of saws and separate washers on the cutting block shaft.
4. We put bearings on the two ends of the shaft.
5. We mount the pulley at the longest end of the shaft.
6. We attach the shaft to the frame with bolts and nuts.
7. We install a small diameter pulley at the end of the shaft.
8. We attach the engine to the frame, ensuring that the pulleys are located on one side.
9. We put a belt on them and control the tension by moving the engine.
10. We make blanks for the protective casing and bunker from steel.
11. We weld the pieces together.
12. We attach the casing and hopper with bolts and nuts to the frame.
13. We connect it to the engine and check its functionality.

A homemade device is indispensable assistant for your garden, easy to use and, moreover, not difficult to make with your own hands. At a minimum, it will save you from unnecessary branches, and the resulting sawdust will serve as fertilizer or as heating for your home.

Dear visitors of the “SAMODELKINDRUG” website, from the material presented you will learn how to independently make a wood chipper based on a walk-behind tractor, while spending a minimum of money. Farming on summer cottage associated naturally with the earth, trees, plants. In autumn or spring, gardeners often prune fruit trees: apple tree, plum tree, pear tree, etc., sometimes you end up with quite a lot of cut branches, which should be put somewhere later. Basically, they are taken outside the dacha village and thrown away, or gradually burned.

But when the right approach, they can be crushed and placed in compost heap, thereby producing excellent compost. For this you will need a chopper, of course you can buy it in the store, but this is not our way! For household, as much as possible you need to do it yourself!

Materials

1. shaft with a knife from a plane
2. channel
3. sheet steel 3 mm
4. drive belt
5. bearings
6. fixed knife

Tools

1. welding machine
2. Bulgarian
3. drill
4. set of wrenches
5. hammer
6. emery
7. calipers

The process of creating a wood chipper based on a walk-behind tractor.

And so, in the photo of the device provided by the author, let's figure out how everything works here. First, the author welded the frame from a channel, then drilled holes and secured the drive shaft mounting brackets. As you can see it is installed on the shaft cutting knife from an electric planer, and a stationary knife is attached to the frame and during the rotation created by the drive of the walk-behind tractor, the loaded branch turns into dust. For the convenience of loading branches, the author made a small hopper from 3 mm steel.
Next, the chopper is attached to the front of the walk-behind tractor, bolted on, and the drive belt is put on the pulleys of the walk-behind tractor and the chopper.
Then the author starts the walk-behind tractor and activates the chopper mechanism. The flood simply feeds the branches into the hopper, and the crushed dust simply flies off to the side.
Our author got such a simple and cheap shredder to make, which he is very happy about, because now the site will be in order, and compost pit will be filled to capacity.

If you liked the material, then we invite you to our group

Sometimes, to keep your garden in order, you need to remove trash and mow the grass. A device such as a branch chopper for a walk-behind tractor was invented in order to reduce the amount of dry brushwood. There are a huge number of these models on the market. However, if you wish, you can make such a device yourself using improvised means.

Equipment characteristics

Dry twigs may remain on your site after cutting firewood or pruning trees. As a result, a huge mound can form that needs to be disposed of. The most famous option is considered to be sending wood for compost. However, this process may take away from you a large number of time, and the branches themselves spoil the aesthetic appearance.

That's why optimal solution is a wood splitter for chopping large sticks and giving them small sizes, which can be used to light the stove and so on. This attachment for a walk-behind tractor has many positive qualities. Among them are:

• there is no need to light fires to destroy garbage and waste;
• The resulting shavings can be used as fertilizer.

Before you start such a unit at home, decide in advance why exactly you are going to grind something. This directly depends on the type and design of the device. In general, all garden waste machines can be divided according to parameters: power and type of engine used, as well as the type and operating principle of the shredding unit.

As you know, any type of car is equipped with an engine. Yes and this device has 2 types of motors:

• petrol;
• electric.

Each of these types has its own pros and cons. For example, a unit with a gasoline engine copes much better with large branches. Such models are more mobile, and they do not require an electrical outlet.

Sometimes the chopper can be used as an attachment for a walk-behind tractor, tractor and other types of machines. Then it's best to use electric version. Compared to gasoline, it is more compact and easier to operate. But electrical devices very attached to the place of connection.

Another feature of such garden devices is the design of the knives. The quality of grinding depends on them. For example, some devices can process tree branches about 10 cm long. The result depends on the diameter of the sticks and the processing method.

The following device is combined design, which processes large pieces of wood and produces small sawdust. In the unit, the main role is played by the disk and knives directly connected to the engine. Due to the low torque, such a device cuts only very thin branches.

The process of making a device with your own hands

Assembling the structure for grinding wooden sticks- a very difficult job. However, if you do everything correctly, you will save your money, which cannot be said about buying in hardware stores.

In addition to saving money, homemade machines have a whole list of positive qualities:

• the person chooses himself the required power unit;
• equipment is equipped required quantity knives that will be needed during work;
• the diameter of the branches is determined during the manufacture of equipment;
• low price of parts for design modeling.

Having decided to assemble a shredder, you must prepare all the necessary materials:

• disc-shaped saws, 15-25 pieces;
• gasoline or electric motor;
• pulley and strong belt;
• set of bearings;
• M20 stud, washers and nuts for it;
• metal pipes intended for the frame;
• steel sheets;
• plastic washers, 14-24 pieces.

Then proceed to the assembly itself, which takes place in several stages:

1. Place the saws on the axis, the caliber of which is the same as the mounting holes of the disks, at a distance of 20 mm. To do this, it is better to take a stud with an M20 thread and bolts and nuts of the same size.
2. If the discs on the pin are too close together, the knife will not function. This is because the teeth touch each other during rotation. To prevent this, install each 2 parts away from each other. In this matter, washers will help you, which you can make yourself from plastic and install between the saws.
3. Next, a pulley taken from an old car is attached to the axle. To allow the axle to rotate freely, use 2 intermediate shaft bearings with a diameter of 20 mm.
4. Weld a frame of metal tubes where the attachment to the walk-behind tractor will later be attached. The motor is attached in such a way that you can move it in relation to the saws. This need arises in order to change the tension of the drive belt.
5. For practical use, secure the holding bar, which is made of metal profiles. Tree branches will rest against this part during crushing.
6. Put a casing on the cutting block, which is welded from steel leaves.
7. An additional hopper with a socket is attached to the upper part. It is needed to load material and can be made of galvanized steel.

Your log splitter is ready and you can get to work with ease.

Conclusion on the topic

As it turned out, homemade wood splitter- a very useful and irreplaceable thing in agriculture. Although the knives of this device cannot chop large logs, they can easily cut through small twigs.

By assembling the shredder yourself, you get the opportunity to choose all the necessary parameters that make the work easy.

This is the main advantage of homemade products over factory-made analogues.