Baxi gas floor-standing cast iron boilers. Baxi SLIM - floor-standing gas boilers, boilers with cast iron heat exchanger. Types of Baxi boilers

Baxi Slim boilers have a wide range of models, boiler power from 15 to 62 kW. Smooth power control and built-in self-diagnosis system provide increased operating comfort and ease of maintenance. Modern design Baxi Slim boiler and compact dimensions (width only 35 cm) make it easy to place the boiler in any interior. You can choose a model with a built-in boiler or install a separate boiler with the same design next to the boiler (Baxi Slim UB).

Gas system of the BAXI Slim boiler

• Smooth regulation of boiler power in heating and hot water supply modes;
• Smooth electronic ignition;
• The boilers are fully adapted to Russian conditions. Operate stably when inlet pressure decreases natural gas up to 5 mbar;
• It is possible to reconfigure the boiler for liquefied gas.

Hydraulic system of the BAXI Slim boiler

• The primary heat exchanger is made of cast iron;
• Built-in circulation pump (except IN models);
• Built-in storage boiler for preparing hot water (in dual-circuit models) with your own pump;
• Heating circuit pressure gauge;

Temperature control of the BAXI Slim boiler

• Two temperature control ranges in the heating system: 30-85°C and 30-45°C (warm floors mode);
• Built-in weather-dependent automation (possibility of regulation using an outdoor temperature sensor);
• Regulation and automatic maintenance of the set temperature in heating and hot water supply circuits;
• Digital temperature display;
• Possibility of connecting a programmable timer.

Control and safety devices for the BAXI Slim boiler

• Digital self-diagnosis system;
• Ionization flame control;
• Pump blocking protection system (turns on automatically every 24 hours);
• Protective thermostat against water overheating in the primary heat exchanger;
• Draft sensor for monitoring the safe removal of combustion products (pneumatic relay - for models with closed camera combustion, thermostat - for models with open camera);
• Pressure switch in the heating system - triggers when there is insufficient water pressure;
• Safety relief valve in the heating circuit (3 atm.) and in the hot water supply kennel (8 atm);
• Frost protection system for heating and hot water supply circuits.

Designations in the model name:

Fi- a boiler with a closed combustion chamber: combustion air can be taken from the “street”, the chimney is coaxial (pipe in pipe) or separate, the presence of draft in the chimney is not necessary.

i- a boiler with an open combustion chamber: combustion air is taken from the room where the boiler is installed, the chimney is traditional, providing natural draft.

N- models without a built-in pump, expansion tank, pressure gauge and safety valve.

Models BAXI Slim 2.300 And BAXI Slim 2.230 have a built-in boiler for preparing hot water.

Floor-standing gas boiler Baxi Slim

When you need to heat a house quickly and at minimal cost, a floor-standing baxi gas boiler is preferably chosen. Especially if there is a gas main nearby. The owner of the house will have to collect necessary papers, install a step-down station, install a gas pipeline and buy a gas boiler.

The manufacturer Baxi produces various modifications of boiler equipment from wall-mounted to floor-standing cast iron boilers.

The most popular models for large cottages, today, cast iron is considered floor standing boilers baxi slim. They are characterized by high thermal efficiency, low consumption gas fuel and enough modest in size and weight. If we take as an example a floor-standing gas boiler of average power (no more than 30 kW), then it can weigh no more than 130-140 kg. This fact will mean the following - you will no longer have to choose to install gas boiler additional space in the form of a separate extension. It is enough to select the basement of the house, install the boiler inside, connect gas, water and electricity, and we can assume that in a short time the heating boiler will be able to heat the house. Modern Baxi slim floor standing boiler must have a connection to electricity, from which it works as a power supply heating boiler together with automation, and circulation pumps, valued for their ability to accelerate the coolant to the required speed in the heating system if there is a gas shortage. Most of the floor-standing cast iron boilers BAXI manufactured in single-circuit form. This fact means that one heating circuit can heat the house and at the same time provide hot water using a boiler indirect heating impressive capacity (up to 2000 liters), which will allow you to get an abundance of hot water needed for household needs. To do this, the boiler manufacturer BAXI uses a control panel installed on the front cover of the boiler, which in turn switches the pumps to the boiler, heating or mixing unit. And there is last advantage– no more need to light the fire floor cast iron boiler V manual mode(using a burning piece of newspaper), since it has its own electric ignition system, thanks to which the floor-standing boiler can turn on and off completely automatically. If we sum up all the positive advantages of cast iron floor-standing boilers baxi, then it becomes obvious that they are considered the most relevant and practical for those houses that have electricity, gas and tap water.

The Italian brand Baxi produces advanced heating equipment, which is in demand in many countries around the world, including Russia. It is represented not only by compact wall-mounted, but also by floor-standing boilers in the form of three model lines: Baxi SLIM, Baxi SLIM EF m SLIM HPS. Floor Baxi boilers They have a multiple reserve of reliability and durability and are used for heating residential, commercial, industrial and public premises. They are famous for their long service life and the absence of problems during operation.

• Baxi SLIM - floor-standing energy-dependent gas boilers heating with cast iron heat exchanger (14.9 - 62.2 kW)
• Baxi SLIM EF - floor-standing energy-independent gas heating boilers with a cast iron heat exchanger (22 - 60.7 kW)
• Baxi SLIM HPS - floor-mounted energy-dependent gas heating boilers with a cast iron heat exchanger of medium power (78.7 - 107.9 kW)

Baksi floor-standing gas boilers, as mentioned above, are equipped with durable cast iron heat exchangers. They are resistant to corrosion, withstand temperature overloads, and have a long service life. Thanks to them, boilers can operate for decades without additional service. Atmospheric burners are responsible for generating heat.

The Baxi SLIM series of boilers is represented by a very wide model range- these are boilers with both open and closed combustion chambers, both single-circuit and double-circuit (with a pre-installed boiler).

A little about the meanings in the name of the SLIM series heating boiler:

• 1 - single-circuit boiler
• 2 - double-circuit boiler
• F - closed combustion chamber, respectively, without F - open
• i - electronic ignition, it is available in all boilers
• N - no hydraulic accessories (expansion tank, safety groups)
• 150 .... 300, 400, 490, 620 - maximum power, respectively, 15 .... 30, 40, 49 and 62 kW

Thus:

• Baxi SLIM 2.300 Fi - double-circuit boiler (with boiler), power 30 kW, with a closed combustion chamber and electronic burner ignition
• Baxi SLIM 1.490 iN - single-circuit boiler, 49 kW, with an open combustion chamber and without hydraulic accessories

Advantages of Baksi floor-standing gas boilers:

• Compact design;
• Fast heating of the coolant;
• Minimum heat losses due to the thermal insulation of buildings;
• Automatic maintenance temperature;
• Large power range;
• Possibility of working on liquefied gas;
• Stable operation at reduced gas pressure.

Baksi boilers received thousands positive feedback users and specialists in thermal equipment.

Baxi floor-standing boilers are represented by three model series, including single-circuit and double-circuit models. The SLIM line is compact and neat in design; some models are equipped with circulation pumps with air vents. Double-circuit models have built-in boilers. The SLIM line includes heat exchangers with large area heat exchange, boilers have thin bodies. As for the non-volatile line of SLIM EF boilers, it is distinguished by the ability to operate in buildings without electrification. They are ignited from a pilot burner. The equipment independently maintains the desired temperature in the heating circuit.

Baxi gas floor-standing boilers are available in models of varying power, from 15 to 107.9 kW. The heated area can exceed 1000 square meters. m. The equipment is fully adapted to Russian operating conditions, has high efficiency and provides fuel savings. If necessary, it can be reconfigured to work with liquefied gas. Some models are equipped with weather-compensating automation and two-stage burners.

Need a floor standing gas boiler from Italian brand Baxi? You can buy it in the Teplodvor online store. All manufactured products are on sale model lines. Buyers are offered delivery services throughout Moscow and throughout Russia. The equipment is accompanied official guarantee manufacturer.

Introduces floor-standing cast iron gas boilers increased power Slim HP series. These boilers are a continuation of the Slim series of floor-standing boilers, popular in Russia, and have three models with a capacity of 83, 99 and 116 kW. Last year, more than 10 thousand Slim floor-standing boilers were sold and installed in Russia. Thus, we can safely say that Slim boilers are one of the most popular and best-selling foreign-made gas floor-standing cast iron boilers in Russia.

At the same time, the number of sales of Slim boilers in Russia is growing from year to year. The maximum power of Slim boilers is 62 kW. Fulfilling the numerous wishes of its partners, BAXI offers high-power models of the Slim HP series. Prefix "HP" in in this case translated as “High Power”. The Slim HP series is a series of highly efficient gas boilers with an atmospheric burner.

All models in this series are made in a gray body with a black control panel, just like the classic Slim boilers. The fundamental difference between BAXI Slim HP boilers is the design of the cast iron heat exchanger. IN classic boilers Slim sections of the heat exchanger gain depth as power increases. This concept limits maximum power Slim boilers with a value of 62 kW (due to the requirements for uniform gas distribution along the cylindrical burner).

Therefore, for the Slim HP series of boilers, we used a cast iron heat exchanger developed by the French design bureau holding BAXI Group. Slim HP heat exchanger sections are made wider. Its patented unique design consists of sections assembled using steel hydraulic manifolds. This arrangement of the heat exchanger gives a number undeniable advantages compared to the classic nipple assembly, for example: low hydraulic resistance of the heat exchanger cavity and compact size of the heat exchanger.

In this case, only one is used for assembly wrench. A sectional heat exchanger made of highly plastic eutectic cast iron with profile fins has a large heat transfer surface and excellent aerodynamic properties. Slim HP series boilers have all the necessary controls and safety devices. The draft sensor built into the draft stabilizer will stop the boiler in case of problems with the chimney.

Two-stage operation gas burner controls the flame ionization electrode and if the flame goes out, the gas valve will instantly close. An overheat thermostat installed in the front section of the heat exchanger will stop the boiler if the boiler overheats. Thanks to the increased layer of fiberglass thermal insulation placed under the casing and the thoughtful design of the boiler, the maximum efficiency for atmospheric boilers is 92%.

Slim HP series boilers are equipped with a two-stage gas valve. The first stage is 60% of the boiler's rated power. Boilers of the Slim HP series operate stably at reduced gas pressure, maintaining the safety of ignition and stable combustion at inlet pressure gas 7 mbar, which is certainly an advantage in Russian conditions. With the help of an auxiliary ignition burner, particularly smooth ignition can be achieved.

Boilers of the Slim HP series are equipped with a simple and reliable control panel with the ability to connect a room mechanical or programmable BAXI thermostat. If desired, you can install an additional control panel with the possibility of weather-dependent regulation, boiler control and programming of operating modes of the hot water supply and heating circuits. This Albatros2 automation from Siemens turns the Slim HP boiler into a progressive automatic system to maintain the microclimate in the building.

To create large-capacity boiler rooms, Slim HP series boilers can be installed in a cascade using a special accessory - a wall-mounted cascade regulator. The main advantages of the cascade control unit are uniform loading of boilers, stepwise increase in thermal power and uniform service life of each boiler.

Based on all of the above, we can confidently say that cast iron boilers Slim HP series from BAXI are a worthy addition to the Slim line, a reliable and flexible solution, as when creating individual system heating, and in the case of operation in cascade to provide heat and hot water large rooms.

Boiler manufacturer Baxi, Italian company BDR Thermea is one of the world's leading concerns producing heating equipment. The company has production facilities throughout Europe and distributes its products in 70 countries.

Heating equipment Baxi

In Russia, of all the equipment produced by this company, the most popular are Baksi double-circuit boilers. Such equipment allows you to provide housing not only with heat, but also with hot water.

Most of these boilers run on gas, although there are also diesel boilers Baxi and solid fuel equipment.

The company does not produce electric boilers. To date, its catalog contains only electric water heaters.

Boiler features

The positive qualities of the company's products include:

• ease of installation. The design of Baksi boilers is made in such a way that they can be installed in in the right place Even a non-professional can do it. However, to guarantee proper operation Of course, it’s better to turn to specialists who can not only install heating equipment, but also set it up. If you buy a Baxi wall-mounted gas boiler from our company, you can count on installation assistance, which will be provided quickly and efficiently by our specialists;
• increased strength of boilers. Thanks to this, they can safely serve for decades. In case something happens to the equipment, our company offers you warranty and post-warranty service for all boilers purchased from us;
• ease of operation. To use Baxi boilers, the attached instructions are sufficient, all controls are intuitively simple and convenient, and the equipment itself is reliable and of true European quality.