Decor for interior doors. Door decoration methods. the best manufacturers of interior doors

You can update your interior quickly and inexpensively using non-standard design. There are many design solutions in which the door decor fits organically into the design and gives the room a logical completeness.

Decorating doors with your own hands is not only an easy way to transform your living space, but also an excellent method for eliminating minor design defects that appear during long-term use. In this article we will look at the basic principles of this kind finishing works and give examples of the most interesting and affordable options.

Wallpapering doors

Today, stores offer a wide selection of materials that are great for decorating. interior doors. However, wallpaper has been taking the leading position for quite a long time. Classic wallpaper looks great both on walls and on other interior items (including as door decor).

To use this method, you don’t have to spend a lot of time and money on finishing work, and a wide variety of wallpaper models allows you to choose the style and shade that suits you.

Note that to decorate doors it is not necessary to use wallpaper to match the walls; you can choose any pattern or color you like (this can also be modern photo wallpaper).

Classic wallpaper

If you are going to decorate interior doors with your own hands, then it would not be amiss to note the need for the correct selection of materials. In the case of wallpaper, you should give preference to more expensive products, since cheap options most often cannot be smoothed out and quickly lose their appearance. It is worth paying attention to the quality of the adhesive mixture.

Choose only high-quality wallpapers

As for the process of decorating walls with wallpaper, everything is simple:

1. First, the surface must be thoroughly cleaned of traces of dirt and grease using a degreaser or solvent.
2. If there are chips or other defects, use a special wood putty.
3. It is necessary to dilute the glue to the desired consistency, according to the instructions on the package, and apply the solution to the door leaf.
4. Cut a strip of wallpaper to the required length and try it on the door, then cover it with glue.
5. The process of applying wallpaper begins - when gluing the canvas, make sure that there are no bubbles left on the surface.
6. To smooth out defects, use a roller or wide plastic spatula.
7. Excess parts of wallpaper are removed using regular stationery knife.

In the video: covering a door with wallpaper and decorative moldings.

Textile

Do-it-yourself door decor involves independent choice materials and unusual design methods. One such technique is the use of fabric. The selected material can become either an integral decoration of the door leaf or a partial decor.

You can decorate the door leaf as follows:

1. Measure the width and length of the part of the canvas that you want to decorate.
2. Make a fabric pattern according to the dimensions obtained and cut it out.
3. Apply double-sided tape around the perimeter of the door.
4. All that remains is to glue the cut fabric onto the door, after making a fold along the edges.

Most often, for this kind of finishing work, whole pieces of fabric are used, but decoration made using the “patchwork” technique looks great in the interior - several fragments are taken various colors and textures.

A universal option for decorating old doors is liquid wallpaper. With their help, you can recreate entire pictures of incredible patterns on the surface. To work you need to prepare following materials and accessories: alkyd primer or white putty on oil based, dry wallpaper mixture, a set of spatulas of different sizes, a roller, color and clear varnish.

If colored liquid wallpaper is purchased, then there is no need for color

Compared to classic wallpaper, the process of applying this material has a number of distinctive features:

1. At the stage of preparatory work, the door leaf is covered with a layer of primer or white putty. It is important to wait until the coating is completely dry.
2. According to the manufacturer's instructions, you need to prepare a mixture of liquid wallpaper by adding the right amount water and dye to add color.
3. Using a small spatula, apply the wallpaper mixture evenly in a thin layer. If desired, you can prepare wallpaper different shades and create a multi-colored composition.
4. When the resulting decorative coating dries, it should be fixed with transparent varnish.

Important! The main disadvantage of liquid wallpaper is the impossibility of using it in rooms with high humidity. This material is easily exposed to moisture and may peel off.

One more in an unusual way The design of the door is the use of glass and various mirror elements. This approach allows you to visually expand the space of the apartment, as well as make it more illuminated.

Door decor is quite simple:

1. To begin, remove the canvas and place it in a convenient place. It is advisable to treat the surface with a degreaser.

2. Make marks for the future location of the mirror, according to its dimensions.

3. Apply glue (or better yet, a good sealant) around the perimeter and in the middle of the marked area.

4. Place the mirror and press it firmly against the surface of the door.

5. For additional decoration, the mirror can be decorated with a frame, and it is still glued with the same sealant.

6. Until the sealant is completely dry, it is better to additionally secure the frame with tape.

Now especially popular with Russian citizens Acrylic panels with amalgam are also used - they are characterized by increased reflectivity. The disadvantage of using a mirror panel is high price products. However, high quality and unsurpassed aesthetic characteristics cannot leave buyers indifferent.

Buckwheat door decor

You can also decorate a doorway using ordinary buckwheat husks. This method of framing is very ambiguous, but has a number of advantages: it is a non-standard approach, the versatility of the material, as well as low cost material, ease of application and the ability to create a wide variety of patterns. The downside is the fragility of the coating.

Work order:

1. It is advisable to remove the old finish from the door, be it paint, varnish or any other coating.
2. The surface is degreased and covered with a layer of dark brown paint. If there are glass inserts, it is better to protect them around the perimeter with masking tape.
3. When the paint has dried, PVA glue is applied on top, after which everything is sprinkled with buckwheat husks or the grain itself.
4. All that remains is to fix the resulting decor with acrylic transparent varnish.

To give the composition completeness, craftsmen recommend transforming the picture frame or other interior detail located next to the door in the same way.

Vintage style decor

Last time vintage style became especially popular. It is used to decorate living rooms, bedrooms and other living spaces. The special atmosphere of such interiors creates a cozy and homely mood. As the masters note, the vintage style can “bring old doors back to life” and fill the space of the apartment with a unique charm.

For finishing work you will need: coarse sandpaper, PVA glue or a special mounting mixture, baguette, paint light color(preferably pastel), rollers and brushes, fixing varnish, additional decor at your discretion.

Decoration progress:

1. The main stage of decoration involves painting the door in a neutral color. Next you need to wait until the paint dries.
2. Using sandpaper, the canvas is lightly sanded. Traces will appear through the layer of previously applied paint. natural wood, which will give the surface an aged look.
3. Upon completion of rough processing, decoration of the central part of the door begins. To do this, the selected baguette is coated with glue on the reverse side and pressed tightly against the canvas.
4. Additionally, you can decorate the composition using old music books, posters, geographical maps and any other vintage images - they are simply glued to the surface. You can also install antique fittings (for example, a handle).
5. To make the resulting decor shine fully, the baguette is painted, and two layers of transparent acrylic varnish are applied on top of the pasted pictures.

Decorating old doors

New interior and entrance doors cost quite a lot, which is why if there are small defects on the surface of the door leaf, the best solution would be restoration and subsequent decoration of this subject interior This approach applies to old furniture, which over time lost its original appearance.

The procedure for decorating wooden doors is as follows:

1. The door must be removed from its hinges and the old fittings replaced with new ones. It is advisable that locks, latches and door handles be made in the same style.

2. After you have removed the door leaf, you need to remove the old paint. To do this you will need a hair dryer and spatulas of different sizes.

3. It is very important to properly repair all microcracks and scratches on the surface of the door. This can be done using putty and special putties.

4. When the surface of the door is completely dry, you can begin sanding. At the same stage, it is necessary to apply a layer of drying oil to the canvas, which will prevent the coating from deforming under the influence of negative factors environment.

5. There are a large number of ways to decorate the door leaf - you can use paint or apply a layer of varnish, create an interesting composition using stencils or imitate moldings.

In the video: how to restore a door or give an old door a fresh look.

Decoupage technique

To decorate the door leaf, you can also use the decoupage technique. This method is easy to do with your own hands, which allows you to recreate exactly the design that reflects the interests of the residents of the house. The decoupage technique perfectly complements the vintage style, decorating it and giving it a modern look.

Decoration is carried out using napkins, which are fixed to the surface using decoupage glue or PVA.

Before gluing the composition of napkins, the door must be treated with putty (to level the surface), first covered with dark paint, treated with wax, and then painted with white acrylic paint and lightly sanded. This will create the same antique effect.

Updating a door using self-adhesive film

Self-adhesive film is also used to decorate old doors made of natural wood, glass, metal and even plastic. Distinctive feature This material is highly elastic, which makes it possible to frame the door with the most different ways(around the painted surface). That is why self-adhesive film is excellent for decorating furniture, door panels, windows, and window sills.

If you do not have additional material resources, but are striving for a radical transformation of the interior or entrance door, then purchasing this material would be an excellent solution.

Using paints

You can update the interior with standard door painting. The advantages of this method include: accessibility, long service life, elimination of defects and stains, variety color options and ease of maintenance of the coating. However, such decor today will surprise few people. It makes sense to decorate a doorway with paints in a children's room, especially if you involve a child in this process.

When buying paint, give preference to acrylic products. These materials lie flat on the surface, leaving no stains or smudges.

Stained glass painting

All kinds of stained glass windows are ideal for decorating glass doors. As a result, you will receive an original and spectacular interior, visual extension space and thematic zoning of the house. And all this with the help of one or two small stained glass windows. You can create stained glass on glass with your own hands; for this, art stores sell sets of stained glass paints.

In addition to paints, you will need a contour - the so-called metal border between fragments of different colors.

Decor using old maps or posters

To decorate the interior door of a teenager's room, you will need a stack of old posters, fragments from newspapers or magazines, as well as geographical maps. For a child, such a decoration will be a pleasant surprise, especially if the door to the room is decorated in the style of his beloved music group. You can paste the scraps in the same way as with classic wallpaper.

It is worth noting that this option is suitable not only for children and teenage rooms. This decor will fit perfectly into the interior of a small country house: for verandas and bedrooms, use posters and newspaper clippings, and for the living room, use geographical maps and music notebooks written by the residents of this house.

Decor using stickers

To update the interior of a room, it is not necessary to purchase acrylic paint, glass or rolls of wallpaper. A fairly simple and inexpensive way to decorate doors is to use decorative stickers. By decorating the door leaf with this kind of elements, you will not only refresh the space of the room, but also make it more modern and youthful.

This technique will definitely shock your guests and make them constantly turn around at this element of the interior.

When decorating glass doors decorative stickers are applied horizontally (or in parts) on both sides of the canvas, due to which the design acquires an original appearance. Specialty stores offer a wide selection of similar products of various shapes, textures and sizes.

The most optimal option for decorating an interior door is the use of vinyl stickers. They are durable and resistant to environmental factors (they tolerate high temperatures, influence ultraviolet rays And high humidity air).

On video: how to glue a sticker on a door.

Glass decor on the door

One of the most common design techniques in decoration doorways is stained glass and sandblasting design. A simple version of this type of decor that you can do yourself is to replace transparent glass with colored or corrugated stained glass inserts.

You can also contact a specialized company and develop your own stained glass design. In this case, you will choose the type and content of the composition yourself.

Before applying a design to the glass, you must thoroughly clean the surface of dirt and dust, then lightly moisten the glass with water and wipe it with a soft cloth. The next step is to prepare the desired mixture of acrylic paint and apply the resulting solution in a thin layer. After the design has completely dried, wipe the glass insert with a cloth and enjoy the result.

If you do not have special artistic skills, then stencils will help you decorate a glass door. Choose several image options in the store, arm yourself with paints and turn an old door into a work of art.

Decor of interior doors with moldings

The appearance on the market made it possible to transform the door leaf immediately and without unnecessary finishing work modern species molding. The surface of this type of element can be either smooth or with an unusual texture. The decor with moldings will fit perfectly into classic and vintage design - this finish goes well with baguettes, tapestries and furniture made of expensive wood.

Just a few years ago, you could only find wooden moldings and models made of gypsum stucco in stores. Now they produce options from polystyrene foam and expanded polystyrene, which are easy to install.

Door leaf design is an effective and original way transform the interior of the room in the shortest possible time. There are a large number of decorative options for entrance and interior door structures. When choosing, you should take into account personal preferences and the design features of the apartment. Then it will be easier for you to decide what to choose - plain painting of the doors, highlighting the molding, stained glass or wallpaper.

The simplest and most budget-friendly ways to decorate (2 videos)

Let's look at some of the simplest ways to decorate interior doors with your own hands using scrap materials.

As you know, doors do not last forever, and anything can happen. For example, scratches, chips, and cracks often appear on the door leaf. In this case, you can repair, replace or carefully decorate, hiding all defects.

Wallpapering the door

To decorate a door, you can use not only paper, vinyl and non-woven wallpaper, but also fabric or liquid.

In this case, the canvas should be prepared by removing a layer of paint in advance, filling up uneven areas, cracks and sanding the surface.

A layer of applied primer will provide additional adhesion of the wallpaper to the surface of the door.

You can wallpaper both the entire canvas and the panels by cutting out pieces of wallpaper of a suitable size. Don't forget to choose an adhesive that matches the type of wallpaper and dilute it according to the instructions.

Wallpaper classic

Lubricate the cut wallpaper with glue and apply it to the door, making sure that there are no jams or distortions. Smooth the wallpaper with a soft cloth, roller or wide plastic spatula. Carefully trim off the excess with a utility knife. Additionally, you can decorate it by gluing a frame made of foam plinth on top of the wallpaper.

While the wallpaper is drying, it is advisable to close the windows in the house and prevent the appearance of drafts and sudden temperature changes.

Textile

A door decorated with fabric looks very unusual and attractive. In addition to standard surface preparation, attention should be paid to the fabric itself, determining the degree of shrinkage.

We cut off a small piece of fabric, measure its dimensions, moisten it with water and dry it. After drying, we take measurements again, comparing the readings and finding out the degree of shrinkage. If the value is large, then the entire piece of fabric is also moistened and left to dry before decorating.

Note! You can use not only a single piece of fabric, but also cut pieces of different colors and textures. This technique is called “patchwork” and is often used by designers in interior design.

For fabric, casein glue, a composition based on CMC, as well as Bustilat or Gumilax mastics are best suited. Apply the adhesive to the fabric and apply it to the door, smoothing it with a spatula. When covering a door with fragments, it is important to ensure that they are geometric, otherwise the work will look sloppy.

Additionally, you can decorate the door with beautiful furniture nails, shiny nylon or leather cords, fabric paint, and baguette frames.

- universal. They cover not only walls, but also doors, creating unimaginable patterns and compositions. In this case, you don’t have to bother with cutting the canvases. However, the door cannot be exposed to moisture. Therefore, this method is unacceptable for decorating a door in a bathroom or kitchen.

To work, you will need a dry wallpaper mixture, several spatulas of different sizes, a hopper gun, a roller, a clear varnish, and a color scheme.

Decorate the door with a mirror

Very unusual decoration doors can be made using mirrors. Such decor will not only attract everyone’s attention, but will also visually expand the space of the room and add light. However, cutting and attaching a classic glass mirror is very inconvenient, fortunately there is an alternative - acrylic panels with amalgam, which has excellent reflectivity.

Acrylic mirrors are available in a wide range of colors. You can choose any shade you like or several to make mirror panel. Plastic panels do not break, are easy to process and attach to the door, and are light in weight. The cost of mirrored plexiglass is not the lowest, but the quality and aesthetic qualities fully correspond to the stated prices.

Thickness	Color	Trademark	Sheet size, mm	Price per sheet, rub
2	silver	SPD (Italy)	1220*2440	5950
2	silver	Plexiglas Mirror (Germany)	2050*3050	11150
3	silver	PLASKOLITE (USA)	2050*3050	14000
3	gold	PLASKOLITE (USA)	2030*3050	15700
3	gold	Plexiglas Mirror (Germany)	2030*3050	16000
3	red, blue, green, orange, yellow, black (color opaque)	Extruded acrylic glass ZENOCRYL OPAQUE XT	2050*3050	10989
3	colored transparent (red, orange, yellow, light blue, blue, green, purple)		1220*2440	5453
3	fluorescent transparent (yellow, pink, brown)	Cast acrylic glass ZENOCRYL TRANSPARENT	1220*2440	5075

Before attaching the mirror plastic to the surface, you should carefully level the surface by deepening the heads of the nails, sanding off and covering with putty all the irregularities/recesses.

A deep penetration primer must be applied to the door and the back side of the acrylic sheet. After it dries, the cut panels are secured with double-sided tape and mounting adhesive. For convenience, use mounting suction cups; with their help, it is much easier to carefully glue the panels to the door leaf.

As one of the decoration options, you can consider shaped acrylic mirrors. Such a mirror can be attached in the center of the door or you can purchase several elements and arrange them beautifully. Usually small parts are produced with an adhesive layer already applied.

Even from this simple material, How buckwheat husk, excellent work is obtained. The cost of the material is minimal, but the service life of such a coating, unfortunately, cannot be called too long.

Step 1. Remove the existing layer of old paint from the door vinyl covering, we eliminate all irregularities with putty.

Step 2. Remove the door from its hinges and place it on the floor/stools/table. We paint the door leaf with dark brown paint. If there is one on the door glass inserts, we protect them with masking tape.

Step 3. Thickly coat the dried door with PVA glue, lay out the husks, distributing them with your hands. If necessary, add small gold sparkles.

Step 4. Cover the door with transparent varnish (glossy or matte). It is advisable to apply three layers in order to properly fix the buckwheat on the door leaf.

The beautiful door is ready. To ensure that the door does not stand out from the overall design of the room, decorate the picture frame in the same way and place the creation on one of the walls.

Decorating the door in vintage style

Vintage is sophistication and sophistication, the beauty of artificially aged things, in harmony with the chic of individual decorative elements. A door in vintage style will become a work of art, an exclusive element of the interior.

For decoration you will need:

We will combine painting the door with the decoupage technique and in addition we will add decorative elements. We will carry out the work on a door that has already been removed from its hinges, puttied and carefully sanded, and laid horizontally.

Step 1. Paint the door white. Apply the paint with a wide brush with stiff bristles in one direction, in a thin layer.

Step 2. When the paint has dried, carefully sand it with coarse sandpaper, achieving an “antique” effect.

Step 3. We begin decorating the panels or the central part of the door. We tear music books and old newspapers into small pieces with our hands. Draw a rectangular or square activity field on the door with a pencil. Lubricate the outlined areas with PVA glue. Immediately lay out the paper chaotically, smoothing it with your hands. Apply clear varnish in two layers on top.

Step 4. Along the perimeter of the areas covered with paper, we attach to assembly adhesive black baguette.

Additionally, you can decorate with a beautiful wreath, a large lace bow or plastic beads imitating pearls (adhesive-based).

There are many other ways to decorate doors. Operate with what is available in your home arsenal materials, use your imagination and create your own masterpieces.

Prices for entrance doors

Entrance doors

Video - A variety of ideas for decorating doors

Video - Applying patina to the door

Video - Decorating the door yourself

11 best manufacturers of interior doors

	Photo	Name	Rating	Price
#1		EL"PORTA	⭐ 100 / 100
#2		TRIADOORS	⭐ 99 / 100
#3		STATUS	⭐ 98 / 100
#4		SOFIA	⭐ 97 / 100
#5		ART DECO	⭐ 96 / 100
#6		PROFILDOORS	⭐ 95 / 100
#7		ONYX	⭐ 94 / 100
#8		BELWOODDOORS	⭐ 93 / 100
#9		MATADOOR	⭐ 92 / 100
#10		VOLKHOVETS	⭐ 91 / 100
#11		ALVERO	⭐ 90 / 100

Doors el'PORTA

Doors el'PORTA- these are doors with Italian architecture, produced in Russia. Models of modern design and trendy colors, materials of the highest quality. el’PORTA interior doors are produced using modern Italian and German equipment. Various decorative door coverings allow you to choose best option in terms of price and performance ratio.

Doors EL'PORTA

Characteristics:

• 3D-Graf is a structural decorative material of high density. Distinguishes brightly pronounced texture, average wear resistance;
• eco-veneer is a vandal-proof decorative material that imitates the cut of real wood. High wear resistance, resistance to mechanical damage, fading, moderate resistance to humidity;
• aqua doors - doors that are not afraid of moisture;
• enamel - multilayer material, imitating enamel, but with higher quality.

Doors EL'PORTA

— each product represents an effective combination of priorities modern materials, trouble-free fittings, successful structural and design solutions. Such doors are very appropriate in rooms decorated in modern high-tech or minimalist styles.

Characteristics:

• modern innovative coating Renolit (Germany) stands out for its strength, durability and environmental safety;
• low maintenance requirements. It is enough just to wash occasionally with ordinary furniture care products (not containing abrasives);
• doors can be installed in any room, even with high humidity;
• easy to use, durable and reliable.

— stylish minimalist design will appeal to the modern city dweller. A wide selection of textures and finishing options allows these doors to harmoniously fit into a new, as well as an already finished interior. Telescopic door molding- this is a design solution for the door frame, allowing it to be adjusted to a wall of any thickness.

Characteristics:

• Due to the telescopic effect, the design is suitable for walls of any thickness. Thanks to a tighter fit to the wall, the box does not warp over time;
• harmless material based on polypropylene;
• Spliced ​​solid Angarsk pine is used to ensure the stability of the frame, low weight of the canvas, as well as the environmental safety of consumers.

— Sophia doors are an original, designer product, impeccable European quality and prompt service. The Sophia factory carries out the full cycle of product creation, from developing the design of each door collection with Italian designers, developing manufacturing technologies with German engineers.

Characteristics:

• painting doors using safe acrylic-based components, which are used in the medical industry;
• absolute precision in execution of all joints in the most unusual collections;
• careful selection and research of materials used;
• environmentally friendly, strong and durable in use.

- Design by ARTDEKO direction - these are interior doors for true connoisseurs beauty and comfort. Warm shades natural wood, exquisite shapes, luxurious decor classic doors will become a real interior decoration. Manufacturability and laconic forms of doors in modern style- an example of high design for adherents of minimalism.

Characteristics:

• wood veneer is used valuable species, such as oak or ash;
• inserts made of transparent, frosted, colored or patterned glass;
• are manufactured on high-tech equipment by qualified specialists using high-quality raw materials and materials.

— this type door design, is a collapsible structure made of individual elements(tsarg). The main advantages of this design are its high maintainability, due to the ability to replace any part of the door during operation and huge assortment various models, both in modern and classic style.

Characteristics:

• resistance to chemical and physical influences;
• a special feature of the coating is its pronounced deep “brushed” structure with a glossy varnish plain surface or a matte varnish plain surface;
• equipped with German hinges “Simonswerk” and a German lock “KFV”.

— the Onyx door factory has been producing interior doors for almost 20 years. During this time, the products managed to take a strong position in the market, due to high quality materials, modern equipment And individual approach to clients.

Characteristics:

• products are made from proven and market proven materials: veneer and enamel;
• Doors are produced using modern German and Italian equipment. Thanks to this, the final product meets European standards.

- large production full cycle and the high capacity of the BELWOODDOORS factory make it possible to produce interior doors in a wide price range various technologies: paneled, frame-panel, detailed assembly, molded.

Characteristics:

• all materials used for the production of BELWOODDOORS interior doors are carefully selected and tested for intensive use;
• applying a protective layer to veneer doors polyurethane varnish Italian production guarantees that the doors will last for many years;
• Thanks to multi-layer varnishing, the coating is highly durable.

— door manufacturing is the main activity of the Matador company. At every stage of production, increased attention is paid to product quality. For this purpose, a special department was created that controls all processes - from checking raw materials at the entrance to measuring the thickness of the surface decorative layer.

Characteristics:

• doors are manufactured using the latest equipment;
• fittings are inserted at the factory;
• high performance characteristics.

— in 2018 the company turned 25 years old! During this time, a long way has been passed from a small factory to a huge company with two production sites and 300 salons throughout Russia. They have won the “No. 1 Brand in Russia” award three times and are constantly improving their products and services. Only one mission has remained unchanged: to help customers create stylish, individual interiors.

Characteristics:

• entrance doors, interior doors in classical, neoclassical and modern styles;
• doors made of solid wood, natural wood veneer, finished with enamel or Ciplex laminate;
• doors up to 3 m high, hidden doors;
• sliding doors into a pencil case, along the wall, a book door and other options for opening design.

Doors ALVERO

Doors ALVERO- Alvero factory - manufacturer of solid wood doors. The Alvero and Viporte collections of interior doors include more than 50 models in 60 finishing options. We create stylish quality doors, which will decorate any interior and fill your home with the warmth of natural wood.

Characteristics:

• production uses time-tested carpentry traditions in combination with modern technologies and equipment.

Doors play an important role in the design of premises. There are many in stores different models, but quality ones cost big money, but I usually don’t even want to look at cheap ones. There is a good option - to update old doors with your own hands. There are many techniques, and not the most complex ones, that can correct the situation for little money.

Preparation

Whatever method you choose to update an old interior door, you will need to carry out a number of preparatory work. Usually old painted specimens are going to be decorated. Painting is usually amateurish, so there are more than enough unevenness, sagging and other minor defects. They all need to be leveled.

Remove the door leaf from the hinges and lay it on a flat surface. You can - on a trestle or a table. We take wood putty (even if they are from or) and cover all the holes, chips and depressions with it. After drying, we move on to the next stage - sanding.

We take sandpaper with coarse and fine grains. We process to achieve a smooth surface. If you work manually, it takes a lot of time and effort. With a hand sander, work moves faster. If painting is planned next, we try to achieve as smooth a surface as possible. If you plan to decorate with wallpaper, fabric, self-adhesive film, it may not be brought to the ideal, but it should still be exactly.

Next, remove the dust and wash off the residue with water and diluted dishwashing detergent. Dry it. Further actions depend on the selected update method. If you are going to glue fabric or wallpaper of any kind, you can prime the surface (with thinly diluted glue or a special primer). After the primer has dried, you can glue the selected type of decor or apply paint. By the way, if you are going to paint the doors, you need to select the same type of paint that was there before, otherwise you will have to remove everything to a clean base, and this is very difficult.

Renew old doors with wallpaper

The simplest and affordable way Make old doors attractive by using wallpaper. They do not necessarily have to be the same color as the walls, although this option is not excluded. First, prepare the canvas as described above, and then you can start finishing.

The procedure for wallpapering doors is as follows:

Photo wallpaper

Modern photo printing allows you to transfer three-dimensional images onto paper. It will turn out very beautiful. Moreover, they can print any image of your choice. In general, any. Photo printing is usually done by advertising agencies, sometimes by printing houses. Contact them, explaining what you need (have a flash drive with the selected design and the exact dimensions of the canvas on which you want to print the image). Having received the required image, we glue it on the door according to the method. described above.

Wallpaper with moldings

If on plain wallpaper stick on foam or polyurethane moldings, sockets, the style will completely change. This type of door is suitable for classic interiors or rooms; using a colorful background and a different form of moldings (with curves) can be decorated in Provence style.

The work is no different from the sequence described above. We take the prepared doors with a leveled surface, spread them with glue, and glue the wallpaper.

By leveling the panels with a rubber roller it is not difficult to achieve good results, but a certain number of small air bubbles remain. To remove them, take a special plastic spatula (in any hardware store they exist), and the air is finally removed from the center to the edges. Also, use this spatula to smooth the wallpaper joint, if there is one. It is quite possible to achieve that the joint will not be visible.

Trim the edges of the wallpaper with a wallpaper knife. This must be done before the wallpaper is softened by the glue, otherwise later it may “stretch” behind the blade and tear. Leave to dry. After 12 hours or a day - depending on the temperature and humidity in the room - you can continue decorating the old door.

Carefully apply the markings with a simple pencil. When everything is drawn, use a tape measure to measure the required length of the pieces of molding. We cut it off and file the edges at an angle of 45°. We take a suitable glue (PVA is possible) and carefully smear the back surface of the cut elements, glue them according to the markings, and leave them to dry.

Using the same principle, you can update old doors so that the style will be different. Several examples in the photo gallery.

Beautiful wallpaper with a matching pattern is the secret to the attractiveness of this door decor
Moldings were glued onto the painted doors, which were then painted with “gold” paint.

Designer decoration of old doors

If you are interested in designer items, you can try turning it into an art object. The good news is that you don’t need to prepare it: the unevenness and sagging will be hidden under the design.

The decorating process begins with the making of papier-mâché. Take egg trays, sprinkle them with water, knead them with your fist, trying to level the surface. They will tear during the process, this is normal and even good - we need small pieces. These almost flat fragments are glued onto the surface in any order using liquid nails or using a glue gun.

Used are lids, rings, a small perfume bottle, a small non-working PC mouse, the remains of a mosaic, everything that comes to hand. You will need a lot of trash, you can collect it ahead of time.

When most of the surface is “decorated”, we take acrylic silver paint in cans (you need 2 pieces) and paint the decor well. When choosing paint, it is better to take an expensive one, in particular German, so that it does not crumble later.

Decorating doors using decoupage technique

Romantic or “cheerful” door designs can be made using decoupage. To work you will need:

• napkins with a suitable pattern;
• PVA glue (about 200 ml);
• natural bristle brush;
• acrylic lacquer.

We prepare the canvas as described earlier. We prime and paint in suitable color. After the paint has dried, we begin decorating. Take a pack of napkins you like and separate the top layer, which has a pattern.

We tear napkins with a pattern lengthwise into three strips. We tear it, not cut it. We want a slightly uneven edge. Two strips on one side have a smooth edge; we put them to one side. We tear the middle part into squares. The best option is if they are 3-4 cm on a side.

Take glue, a brush, and a small container. In it we mix PVA with water in equal proportions.

Next, we begin decorating the door with our own hands. Take a strip with a smooth edge and apply it to the area to be decorated (in in this case this is the center of the door leaf). We dip the brush in glue and begin to smooth the fragment in different directions. Wrinkles will form, but this is just a good thing - the finish will be more textured, so there is no particular need to even them out. When wet, napkins are very delicate and elastic, remember this when working and act carefully.

Gradually we make a frame with one smooth edge. The second one comes out carelessly torn.

Filling the middle of the “frame”

When the entire surface is filled, leave it for a day - wait until the PVA dries. Next, take acrylic varnish and cover our decor with a soft brush. To prevent it from smelling, we take varnish on water based. It's a little more expensive, but it doesn't give you a headache.

The beauty of decoupage is that we get beautiful things at minimal cost.

Decorating a door with self-adhesive film

Perhaps the easiest way is to update old doors using self-adhesive. All you need:

• the film itself,
• a spray bottle containing soap and water;
• plastic spatula or soft cloth;
• sharp knife (can be wallpaper).

This film is available in different versions - there is a plain matte or glossy one, there is a plain one with holographic patterns, a wood effect, there are even special ones for covering doors with photo printing applied.

Regardless of the type of film, it is glued in the same way. In this case, we decided to update the old doors using a photo printing option. One point: before gluing, remove handles, latches and other door fittings.

For the decor to be of high quality, the surface of the door must be clean, even and smooth. If you processed it with a sander before, try gluing a small piece of film. If it sticks well, everything is great. If it “doesn’t stick,” you’ll have to prime the doors and then paint or varnish them to create a smooth surface.

Take a spray bottle and evenly wet the surface of the door.

We shave the film, remove the protective layer from one of the corners, and also spray it. So, by wetting, we separate the protective paper from the top along the entire width of the film.

You should get a strip 15-20 cm wide. Do not remove any more so that the film does not stick to the canvas. We apply the peeled part to the upper edge of the door leaf (or the area to be decorated), it quickly sticks. Try to apply it evenly right away, but the position can be corrected - that’s why we wet the surface so that the film could be moved. If you pull it, it moves little by little.

After making sure that the canvas lies flat, take a plastic spatula (for wallpaper) and smooth the surface with it, moving from the center to the edges. The goal is to remove all the air. Since the surface is wet, this is not difficult - the water displaces the air.

Everything else is simple. We pull down the protective paper, peel off the strip, glue it and so on - to the very bottom of the door. If you glued the top part for a long time, the bottom part may dry out, so periodically check whether the doors are dry and spray again if necessary.

After all the film has been glued, use a sharp knife to cut off the excess along the edges. All that remains after this is to install the fittings.

Door decor with stencils

Old doors can be updated using printed drawings. It’s just a pity that not everyone has artistic talent. But in this case, the problem is solved with the help of stencils. You can draw them yourself, or you can find an image you like, print it on thick paper, cut out the design with a sharp knife, leaving jumpers in places. Now the stencil is ready.

The disadvantage of a paper stencil is that it doesn’t last long. If you need a “long-lasting” one, you need to transfer it to a transparent thick film. The technology for cutting out stencils for door decoration is shown in more detail in the video.

The drawing can be anything. Both geometric and floral, stylized images of animals, birds, and cartoon characters are popular.

The interior door occupies an important place in the interior of the room. It not only serves as a barrier to noise, delimits space and allows privacy, but is also a noticeable piece of decor.

Several reasons may motivate you to decorate an interior door:

1. Firstly, despite the huge selection of ready-made (and very attractive) doors, it is sometimes very difficult to find a suitable model. Sometimes all the doors seem the same - “I’ve already seen this one at the neighbors’, “and this one looks like the door to our office.” You don’t want to repeat yourself and buy something that is unoriginal and has become banal, because your interior is unique, so the door should match.
2. Secondly, even an old door with scratches, peeling paint and irremovable stains is why you often don’t want to replace it! After all, any replacement of a door is also a replacement of the frame itself, which is associated with dust, plaster, sealing the resulting cracks, the need to change the wallpaper (at least around new door) - in general, with local and sometimes major repairs.

That is why sometimes it is much easier for the owner to update an already installed door “on the spot,” that is, without changing the entire frame, right here in the room. Of course, in some cases you will still have to remove the door from its hinges, but this is much easier and faster than undertaking a full-fledged repair. Whatever the reasons that prompted you to start decorating an interior door, we’ll say right away that often this requires practically nothing except materials left over from the previous renovation.

So, we offer you 14 ideas for decorating an interior door that you might want to bring to life when decorating your interior.

The first idea. We paint, we just paint

The easiest way, no frills and extra work tidy up the door. To do this, you will first need to remove the door from its hinges, then go over it with a spatula, removing the old paint, level the surface with sandpaper, seal the cracks and scratches with putty, remove greasy spots, cover the glass with masking tape so as not to stain it, and you can pick up a roller or brush! It is better to choose acrylic paint - it dries faster, and paint the door in a horizontal position - this way the paint will not run off and will lie more evenly. However, if you are comfortable doing all of the above vertically standing door- you don’t have to take it off the hinges. Just remember to place something on the floor while painting so as not to stain the linoleum or laminate.

White, simply painted door. Renewing it or repainting it in a different color will not be difficult, although the moldings and carvings need special, careful handling during sanding and removing the old paint layer

Idea two. We paint in several colors

The option is more complicated, although it also involves coloring. In this case, we don’t just paint the door one color, but create a simple or complex geometric pattern of stripes, squares, diamonds, and so on. The door must first be prepared, as in the first case - that is, cleaned of old paint and leveled the surface. However, in this case, we will need much more masking tape - it is with its help that you will delimit the zones between stripes or rectangles. In addition, in order not to buy several cans of paint of different colors, you can purchase white paint(one liter per door is enough), as well as several dyes with which you can experiment with shades.

Gold and white, blue and soft pink, bright stripes on a neutral background, diamonds and winding lines - a variety of patterns and color combinations can appear on your door leaf

When choosing a geometric pattern, remember that a wide strip along the entire door leaf is more suitable for a country style, but for classics it is better to choose other options, for example, paint the upper part of the door in a lighter shade and separate the parts with a horizontal stripe

Idea three. Highlighting moldings

Also painting the door, which in general is not too different from the first option. However, in this case we will focus on the moldings, painting them in a contrasting color. White and black are great combination, but already hackneyed, so think about what colors will look best next to each other. Designers have long recognized white and green, blue and yellow, red and dark blue as excellent options. Such a door will look great both in a bohemian boudoir and in a strict classic living room.

A white door with highlighted black moldings is a true classic. By the way, if your door does not have such decorations, it is easy to make them yourself - special thin wooden strips are sold that are simply nailed onto the door leaf

An unexpectedly bright, pink door that looks especially aristocratic and attractive thanks to the frames highlighted in white

Idea four. We paint according to the finished stencil

A very convenient and simple way to turn your door into a work of art, even if you do not have the talent of an artist. Ready-made stencils can be purchased in construction and specialized stores, or ordered on one of the websites, and the choice of designs and patterns is very large. Then we simply apply the stencil to the already prepared door and apply paint. Easy, fast and the result is very beautiful!

Applying a drawing using a ready-made stencil is as easy as shelling pears, and the choice will allow you to choose an original inscription, an exotic pattern, or an unusual picture

Such a deliberately simple design can be easily created without stencils. It was the uneven lines and simplicity that became its main highlight.

Idea five. Artistic painting

Unlike all the door decoration options already listed, this option is not for everyone. To create a real masterpiece on an ordinary door, you will need the talent of an artist and certain skills in working with brushes, since a roller is no longer enough. Imagine that your door is a blank white canvas, on which, thanks to your skill, a beautiful landscape, a cheerful painting or an exquisite pattern will appear. Fine hand painting always looks expensive and stylish, and you can achieve this effect by spending only on the purchase of paints.

Ready-made interior doors with artistic painting many offer European companies. They are, of course, not cheap, so you can try to create something similar with your own hands. Are you afraid that it won't work out? You can always just paint over a bad drawing!

Idea six. Children's creativity

Does your little one love to draw? Give him this opportunity - let him decorate the door to the children's room himself. Yes, such a naive, bright pattern would be out of place in a formal living room, but as a decoration for a child’s room - great option. Just agree with the young artist that the second half of the door is already your field for realizing your fantasies!

Usually children's paints are washed off very easily, so your novice artist will be able to paint the door again at least every day. But you will have to first prepare the canvas by putting the door in order

Idea seven. Unusual texture using paint

If you think that simply applying paint is boring, and you are afraid to take on hand painting, you can try to achieve an unusual texture, for example, the effect wooden surface or an antique door using a very simple devices. So, using a sponge you can get a mottled surface, steel wool can help you achieve the effect of an antique door, and a stiff brush can create an expressive surface on denim. Special ready-made paints are also sold that perfectly imitate jeans, wood, canvas, velvet or slate.

On such a door, painted to resemble a chalkboard, it is convenient to leave messages for household members

Idea eight. Photo wallpaper

If all the previous ideas concerned only working with paints and brushes, then this method is suitable for those who do not want to mess with paint. Photo wallpaper will instantly transform the appearance of your interior door, turning it into bright element design. Of course, it is best to purchase photo wallpaper designed specifically for doors - in this case, your drawing will definitely look complete. Ready-made photo wallpaper usually have standard size 86x220 centimeters, therefore suitable only for standard doors, and without moldings and glass inserts. However, now many online stores offer custom-made photo wallpaper for doors, so you can choose the option that is ideal for your door, with any pattern. You can cut doors and regular wall murals to size, but in this case the design may look unfinished.

How do you like this unusual option - a door that has been turned into a telephone booth with the help of photo wallpaper?

Before sticking photo wallpaper, the door must be cleaned of stains, and the surface must be leveled, sanded and degreased with a solvent. You can use regular wallpaper glue, but PVA is much more reliable. The disadvantages of this option for decorating a door include the fact that a bright image will immediately catch your eye, so it can quickly get boring. In addition, photo wallpaper on the door will lose its original attractiveness due to frequent touches. However, no one will stop you from changing the photo wallpaper on your door to something more original in a couple of months.

Photo wallpapers with picturesque landscapes are especially popular

Photo wallpaper on the door will help, due to the increased panoramic perspective, to make small room visually more. And it’s very easy to stick them on; you don’t even need to remove the door from its hinges.

Idea nine. Regular wallpaper

Previously, this decorative option was particularly popular, but now many designers consider it bad manners. It doesn't bother me regular wallpaper, “migrated” to the door, remains a popular way of decorating the interior. As an option, you can buy cork wallpaper and coat it with varnish on top for reliability. Their unusual texture will make the door more original.

Preparing the door is exactly the same as when using photo wallpaper. The main advantage is low cost, since you can use wallpaper left over from a previous renovation, and ease of decoration. The main disadvantage is rapid wear and tear - the wallpaper can peel off and tear at the joints.

Wallpaper glued not to the entire door, but to parts highlighted by moldings, looks more impressive

A door covered with the same wallpaper as the walls will literally blend into the interior. The reverse side of the door, of course, is covered with other wallpaper so as not to stand out against the background of the wall of another room.

Idea tenth. Fabric instead of wallpaper

This option will look especially cute and homey. A door decorated with fabric looks original; the choice of fabrics today is surprisingly wide, but this method also has its drawbacks.

If you choose a single piece of fabric to decorate a door, you should take care of the original design

First, when choosing a fabric, you should make sure that the glue will not leave stains on it. Secondly, the edges of the fabric should be pre-treated, otherwise the protruding threads will not look very aesthetically pleasing. Thirdly, doors decorated with fabric will not suit every interior design style. Those who are fond of patchwork, that is, creating canvases from different pieces of fabric, can turn their door into a real applique of bright scraps. By the way, if there is a place on the door for a glass insert, you can hang a small curtain here, securing it with fishing line and small nails.

A very cute door, decorated using patchwork technology. The trouble is that classic style such bright shreds of interior have no the slightest attitude, this is an option, rather, for “rustic” and colorful country

Idea eleven. Posters, cards, paper

Option for creative people and great idea for a teenager's room. The door can be decorated with a poster and an image of your favorite artist or group, sheets from an old geographical atlas, or sheet music. Pasting such paper sheets and posters is as easy as regular wallpaper.

An old geographical map would be appropriate even on the interior door of an ordinary living room, but it is better to “place” posters in a teenager’s room

Idea twelfth. All kinds of stickers

This simple and not too expensive way of decorating a door is becoming more and more popular today. Vinyl stickers can be purchased in online stores, the cost of a model the size of a standard door starts from 2.5 thousand rubles, they are very easy to apply and will last longer than ordinary photo wallpapers.

Stickers with such funny and at the same time useful inscriptions will not only decorate the doors, but also cheer up the guests

If you do not want to hide the entire door behind stickers, it is quite possible to purchase small images - a butterfly, bright flower and so on. They cost less, and will completely transform the appearance of the door. “Informative” stickers are also popular, for example, on the door of an office, bathroom or toilet, which will tell guests what is hidden behind this door.

The elegant lady on this sticker will immediately inform guests of the house that the bathroom is hidden behind this door

Often, stickers can look like ordinary photo wallpaper, and sometimes they can look like hand-painting on a white door or a child's drawing

Idea thirteen. Decoupage

The technology of meticulously cutting out the images you like from paper and then making appliqués from these pieces allows you to transform not only a box or photo album cover, but also an ordinary door. Everything a beginning master of the ancient art of decoupage will need: paper drawings, napkins with a pattern you like, postcards and the like - everything from which you can cut out a design, a brush, PVA glue, scissors, glitter, acrylic varnish, outline and acrylic paint.

In the decoupage process, you can use literally anything - from scraps of old newspapers to greeting cards

IN brief description the process looks like this: apply a layer of white acrylic paint to the surface of the door, wait until it dries, then another layer - and again wait until it dries completely. Then we apply a layer of paint of the selected shade, and then use PVA glue to attach the cut out paper drawings. At the same time, we try to glue the piece as smoothly as possible, without folds, and to expel all air bubbles. Using glitter and contour we can draw dots, stripes and others small parts. Then we cover the finished picture with a layer of varnish. That's all. The rest is your imagination and beautifully selected drawings.

The decoupage technique allows you to create amazingly beautiful paintings, and varnish coating will extend the life of the decor

Idea fourteen. Mosaic

A door decorated with bright mosaics will be an excellent option for a bathroom; you can decorate a metal entrance door in this way. Moreover, it is not at all necessary to use pieces of ceramics for these purposes - in this case the door may turn out to be too heavy. Mosaics can be created from pieces of wood or veneer, or you can purchase a ready-made one made from glass.

In this case, a bright glass mosaic occupies most of the door, making it very unusual and cheerful.

The mosaic is attached with special glue (Moment or liquid nails are suitable) onto a prepared and cleaned surface. It is worth thinking through all the details of the pattern in advance by drawing a diagram of the arrangement of the pieces with a pencil. By the way, you can decorate not only the door itself, but also the frame with mosaics, highlighting the slopes using the selected pattern.

Creating a mosaic pattern is a huge scope for creativity. And if any part does fall, you can always attach it back

An old door can become a real art object; all you need is a little imagination and effort. To get started, you can use one of the most simple ideas, and then, having gained a taste for it, try yourself in the art of decoupage or painting. In any case, your door will definitely be one of a kind!

Tags: ,

All objects in the house sooner or later age, acquiring an unattractive appearance. But if the furniture can be easily replaced and the wallpaper re-pasted, then what to do with the doors? It is not so cheap to dismantle them and purchase new ones. Let's face it, considering the cost of other things during a renovation, this is not a part you want to spend too much time fiddling with. To avoid this, you can decorate old doors with your own hands, which, thanks to a large number options often turns into an exciting activity.

1. Painting

The best way to freshen up an old door by slightly changing the design of the room is to paint it a new color. In this case, you can use one or several shades, highlighting, for example, panel parts, moldings or frames.

Depending on the size of the room, the door can be a bright detail or merge with the decoration of the walls, thereby not dividing the space. Last option suitable for small spaces. In such cases, give preference to light colors.

It is recommended to purchase acrylic paint, which leaves no odors, is applied evenly and is not harmful to health, which is important for a bedroom or nursery. But first you need to prepare your “canvas”: even several layers of paint will not hide the unevenness of old wood. In some cases, this will require removing the doors in order to correct all the shortcomings as much as possible.

Since there is a wide area to work with, the method of application plays a big role in creating a neat final look. Mentally divide the product into several small plots, evenly painting them with even horizontal or vertical stripes. When working on paneled doors, cover them in the following order: insert points, central strips, sides.

After complete drying, you can coat the surface with a protective varnish to make the renewed door last even longer.

Monochrome types will suit many styles not because of their neutrality, but because of their laconicism, restraint and simplicity, which are relevant in modern interior design. You can follow fashion without large investments or experienced craftsmen.

2. Drawings and stickers

If monotonous decor is not your option, feel free to pick up a brush and paint your boring old door with interesting scenes. People with an artistic education can use it as a canvas, decorating it with still lifes, landscapes, and cartoon characters. For the rest, there are stencils or vinyl stickers - no less effective tools that will also provide a beautiful result.

In the case of stencils, the principle of operation is the same as in the first point: we prepare the product, apply paint, wait for it to dry. The base can be a painted or “bare”, pre-treated surface. Drawings on the texture of old wood look impressive.

3. Decoupage

This is an amazing method that, despite the simplicity of the materials and ease of application, allows you to create real works of art. Decoupage is ideal for creating and decorating doors in the Provence style. Especially if you combine it with crackling varnish, which helps visually age objects. Floral patterns made in this way look very sophisticated and natural, allowing one to doubt the “homemade” origin of the decor.

So, you will need: PVA glue, napkins, sponge, scissors for cutting the necessary details drawing. Apply paper to a surface previously cleaned of dust and dirt, and then apply glue to it. To avoid wrinkles or bubbles, you can use a sponge to straighten the picture by removing excess liquid.

After the door has dried, and you will have to wait about a day, the design must be secured with ordinary furniture varnish. Almost any material can be decorated in this way, but it combines best with wood.

4. Wallpaper

It can be a shame when, after renovation, there are several meters of unused wallpaper left. Don't throw them away - it's better to keep them for decorating old doors! This is a completely inexpensive solution that will refresh the interior and hide the shortcomings of the product.

They can cover the entire area or individual parts- it all depends on the image, as well as the design of the room. Some types of wallpaper have a relief structure, making the decor richer and more varied.

For children's or bright interior you can take photo wallpapers depicting landscapes, paintings or other doors. Small games with perspective will visually increase the space. Only its remaining elements should balance the composition, being a neutral background.

5. Fabric

To decorate old doors, you can take leftover fabric, especially if they were used for upholstery. Such an intersection of patterns will look appropriate in one interior.

In any case, the fabric is a textural, eye-catching solution that will definitely help refresh old item, covering up minor shortcomings. You can fix it on the door using regular glue or furniture clips. The second option is good because over time the annoying part can be removed.

Lace is popular not only in clothing, but also in decoration. Here, with their help, you can emphasize the refined taste of the owners by decorating the door with them.

6. Leather

A leather-covered door is certainly a sign of the status of the owners. It will fit more into the space of an office than a nursery, but because of this it becomes no less interesting as an option for decoration.

According to the rules, of course, such products must be ordered in salons, always from natural materials. But for a less solid interior, a substitute is quite suitable, since it can be chosen in all possible color combinations.

The leather will need rivets that will help it beautifully “tighten” the door and secure it in place. In addition, this can give the design an industrial touch, ideal for the loft style.

Fine leather carvings or designs will look luxurious. Another original idea: a door decorated with old straps, but for this you will have to visit more than one flea market.

7. Mosaic

Mosaic compositions will never lose their relevance: they are beautiful, unusual and interesting to implement. It’s somewhat reminiscent of a puzzle, only you come up with the picture yourself.

You can use ceramic, glass or acrylic parts. Make sure that there are enough colors for the future “picture”. These can be realistic scenes, surrealism, or chaotically placed elements that are secured with ordinary glue.

You can decorate the facade, panel or doorway. Check the reliability of the product so that when the doors are suddenly closed, some part does not suddenly fall off.

8. Aging

For some styles, the presence of elements literally imbued with history is the main condition. But here it is worth distinguishing between “shabby” and “luxurious” old age. We need a second type, and we will have to work on creating it.

There are many ways to artificially age furniture. Some of them are professional and not feasible under normal conditions. Others are simple tricks, which successfully imitate cracked paint.

To decorate doors, you can use craquelure varnish, which literally makes the paint crack. Don't forget that it's better to work with several layers to give more depth to your drawings.

A dry brush also copes well with its mission, quickly painting the surface, giving it a shabby look.

Several layers of paint can be rubbed with sandpaper, revealing the multi-layered coating. And if you rub in some places with a wax candle, paint the door and rub, the paint will fall off locally, also creating the desired effect.

9. Stained glass

Multi-colored stained glass windows in churches, which smoothly transmit light, always cause admiration among spectators. Why not try to create a weak, but similar semblance of this beauty at home, at the same time decorating old doors?

Glass inserts are used for this method. And here you have two options: buy a ready-made product with a design or decorate it yourself. The latter, of course, is more interesting, but it can be implemented after some preparation.

In addition to the acrylic paints with which the design is applied, you will need a special outline that creates the illusion of a metal frame. The glass sheet should be in a horizontal position so that the paint does not flow down the slippery surface before it has time to set. The finished product must be installed in the panel and secured with glazing beads.

10. Molding

Moldings will also help decorate old doors - elements that imitate stucco, which is so popular in classic interior or Art Deco style.

The parts are usually made from foam or polyurethane and are therefore cheap, but allow for truly luxurious designs. You can buy ready-made components and fix them on the door using liquid nails or glue.

Usually the decor of doors with moldings is not very diverse, but sometimes you can come across aesthetic models. They can be painted in a color that intersects or contrasts with the main finish, achieving different effects.

Video: How to decorate a door - DIY decor