What is sleep mode windows 10. How to properly turn off the computer's sleep through the Control Panel

There are many variations of using a computer. According to one of them, it may be required at any time, for example, via a remote connection, but it will not be available, since the PC is in sleep mode, and the network does not support the “magic package” to wake up the device. For this and many other reasons, users want to disable sleep mode on their computer. In this article, we will look at possible options where and how to disable sleep mode in Windows 10, 7, 8, XP.

How to disable your computer from going to sleep (sleep)

First, let's look at the easiest way to turn it off, namely how to remove sleep mode on Windows 10 (Windows 10).

Disable via "Windows 10 Settings"

In Windows 10, Microsoft is starting to gradually make the transition from Control Panel to Windows Settings because it's much more convenient and practical to have all the settings in one place. Since there is no Settings window in Windows 8 and older, this method is only for Windows 10.

To find the "Settings" window, you need to click on Start and select the gear icon (or you can press Win + i). Go to the parameters "System", then open "Power and Sleep". In the item called Sleep, set "Never".

But since Microsoft duplicates the settings from the Control Panel, we will show the actual method for Windows 8/7/XP systems, which is also relevant for version 10.

Disable under "Windows Control Panel"

The control panel has always been the main place for customization and system settings, until the arrival of the 10th version of the system. We will show where and how to disable screen sleep on a computer (PC) and laptop, for Windows 8/7 and XP using the control panel as an example.

To open it equally on all systems, press Win + R and in the Run window write the control command, then click OK.

Then, find and go to settings "Power". Don't forget to switch the display to Small or Large icons. Or easier in the "Run" window, write the command powercfg.cpl and click on OK.

In the left sidebar, click on Sleep Settings or on selected "Power plan settings".

After that, you will be taken to the settings we need and where opposite the parameter "Translate PC..." select Never from the drop-down menu.

Also, if your monitor goes into sleep mode, and you don’t know how to turn it off on Windows 7, 10, the parameter will help you "Disable display". This setting is designed to save power when the device is not in use, but the PC itself is active. A value of Never will disable the ability for the monitor to go into standby mode.

In this way, the computer will no longer go to sleep unless alternative values ​​are set, which we will discuss next.

Disable via power circuit

Sometimes there may be conflicts between sleep settings and power plan settings due to different values. For example, if a value greater than Never is specified in the scheme, and sleep mode is disabled in the settings, then either one or the other parameter can be considered a priority value. Everything largely depends on the chipset driver, which coordinates the operation of the power supply circuits.

There were cases when both parameters were set to "Never", but the PC continued to go to sleep, the reason was incorrect powercfg settings, but more on that later. Let's get back to the power supply.

Pass in "Power", and then to Active Scheme Settings. Select "Change advanced power settings".

The “Sleep” value we need contains several settings. For example - "Sleep after" and "Hibernation after" put the device into sleep or hibernation mode after a certain period of inactivity. A paragraph "Allow wake timers"- allows you to wake up the device on some triggers, about which a little later.

For the Windows "Sleep after" options, as well as "Hibernation after" select the value - Never to turn off sleep mode on Windows 10/8/7.

Additionally

For more detailed configuration of the power scheme, you can use the powercfg command. Using this command, you can conduct a complete diagnosis of the power system and identify the most energy-intensive applications, determine the source of wake-up of the device, and much more. Commands must be entered in the window "Command line" on behalf of the Administrator. The powercfg /? command will bring up help on this setting.

Let's look at the main commands:

• Powercfg /energy– analysis of the energy saving system for errors and warnings. Upon completion of the analysis, the report is generated in the System32 folder.
• Powercfg /waketimers- enumeration of the wake-up timers that we talked about earlier.

Also, you can set the time the device goes to sleep:

powercfg -x -standby-timeout-ac 0
where 0 is never and 15 would be 15 minutes (ac for mains power, dc for battery power)

• standby- this is a sleep mode when the computer is "idle"
• monitor- turn off the monitor
• hibernate- switch to hibernation mode.

Also, you should pay attention to the chipset drivers, such as the Intel Management Engine and others, when installed, problems with going to sleep and any power supply problems are solved. Do not forget about the use of power supply schemes recommended by the manufacturer. As practice has shown, these schemes really solve many problems associated with sleep and consumption.

In this article, we looked at the main ways when the computer goes to sleep, as well as how to disable sleep on Windows 7/8/10. If you have any difficulties and problems, we will be happy to help you in the comments.

Have a great day!

This guide details how to set up or disable sleep mode in Windows 10 both in the new settings interface and in the familiar control panel. Also, at the end of the article, the main problems related to the operation of sleep mode in Windows 10 and how to solve them are considered. Related topic: .

Why disabling sleep mode can be useful: for example, it is more convenient for someone to turn off the laptop or computer when the power button is pressed, and not go to sleep, and some users after updating to a new OS are faced with the fact that the laptop does not wake up . Either way, it's not hard to do.

If you go to the power settings in the way described above or through the Control Panel () - Power Options, then there you can also disable sleep mode or configure its operation, while doing this more accurately than in the previous version.

Opposite the active power plan, click "Setting the power plan." On the next screen, you will be able to configure when to put your computer to sleep, and by selecting "Never", disable Windows 10 sleep.

If you click on the “Change advanced power settings” item below, you will be taken to the detailed settings window for the current scheme. Here you can separately set the system behavior related to sleep mode in the "Sleep" section:

Another section of the power plan settings that is related to sleep mode is “Power buttons and lid”, here you can separately set actions for closing the laptop lid, pressing the power button (default for laptops is sleep) and the action for the sleep button ( I don't even know what it looks like, I haven't seen it).

If necessary, you can also set options for turning off hard drives when idle (in the Hard Drive section) and options for turning off or dimming the screen (in the Display section).

Possible problems with sleep mode

And now the typical problems with how sleep mode works in Windows 10 and not only it.

Windows 10 also has a hidden item "Timeout for automatic system sleep", which, in theory, should only work after automatic wake-up. However, for some users it works without it and the system falls asleep after 2 minutes, regardless of all settings. How to fix it:

That's all. It seems that he told even more than necessary on such a simple topic. But if you still have any questions about sleep mode in Windows 10, ask, we'll figure it out.

The developers of the Windows operating system took care of the owners of PCs, laptops and other portable devices and added sleep mode. Its essence lies in the fact that after a certain period of inactivity, the computer turns off the screen and reduces the power consumption of all components. However, the user does not always need this option, especially the owners of personal computers. This article will tell you how to remove sleep mode in Windows 10.

What is hibernation and sleep mode

Before providing the instructions themselves, it is worth talking about the differences between hibernation and sleep mode, because many people confuse these concepts.

So, hibernation is the state of a computer when all data from RAM is transferred to a file specially created at the root of the system. By the way, it is called hiberfil.sys, and its size is equal to the amount of RAM.

If you select this option when you shut down, the Windows boot loader will indicate that the system first accessed this file at startup, restoring the computer. By the way, turning on in this state occurs instantly, and on the screen you will see all those windows and programs that were when you turned it off.

Sleep mode means only a reduction in power consumption. The computer also remains in the same state, but the data from the RAM is not unloaded.

How to turn off hibernation on windows 10

Now you can go directly to the manual. It should be said right away that there are two ways to remove sleep mode in Windows 10. The first involves changes in system settings, while the second uses the Control Panel tools. Both methods are equally effective, so check out the two to determine which one is more convenient.

Method 1: in system settings

Many users are wondering where to disable sleep mode in Windows 10. The answer is quite simple - in the system parameters, the only problem is that not everyone knows exactly where to look for the desired section. Now this will be discussed in detail:

1. On the desktop, click on the "Start" button.
2. In the menu that appears, click on the "Settings" button, which is shown as a gear.
3. In the window that appears, go to the "System" section.
4. Now, in the sidebar, open the Power & sleep category.
5. Now in the main area of ​​\u200b\u200bthe window you can see the subtitle "Sleep", this is where you can turn off sleep mode on your computer. To do this, set the value "Never" in the two drop-down lists.

As you can see, disabling this mode is quite simple. By the way, just below you can follow the link "Advanced power settings", where you can make more flexible settings. For example, you can set the action to be taken when the power key is pressed.

Method 2: in the "Control Panel"

This method is good because it is universal. That is, it can be used not only in Windows 10, but also in all other versions of the operating system. First of all, you need to open the "Control Panel". In the "top ten" this is quite problematic for an inexperienced user, since this element has been removed from the Start menu, but there is a universal method:

1. Press the Win+R combination on your keyboard.
2. In the input field, write the command "control".
3. Click the "OK" button to execute it.

Immediately after that, a corresponding window with all related tools will appear on the screen. We need to find and select "Power Options". Having done this, you will be taken to the window of the same name, where the sleep mode is configured:

1. Click on the "Setting the power plan" link, which is located to the right of the "Balanced" item.
2. In the new window, in the "On the network" section, set the two drop-down lists to "Never".
3. If you want to disable sleep mode even when the laptop is running on battery, then set the same values ​​​​in the corresponding column.
4. It remains only to click the "Save changes" button.

Now you know the second way, which allows you to remove the transition to sleep mode in Windows 10. As you can see, it is not much more complicated than the first, so decide for yourself which one you will use.

Flexible power settings

Being in the "Power Options" window, you can go to another section, where more flexible configuration of the entire scheme is carried out. To do this, just click on the link "Change advanced power settings". After that, a window will appear in which the following options are available:

1. Specify the time after which the computer will go to sleep.
2. Enable or disable sleep mode.
3. Wake-up timer activation.

If you want to make flexible settings for this mode, then you should do it here.

Possible problems

Now you know how to remove the sleep mode item in Windows 10, but it is quite possible that after following all the instructions, it still continues to work. Or, on the contrary, it works, but incorrectly. Further down the text, we will talk about the most common problems and their solutions.

Problem #1: Screensaver display

If you have turned off sleep mode, but still observe how the computer screen goes blank after a while, then it is recommended to check the Screensaver settings. First, let's run it:

1. Click on the "Search" button.
2. Enter the word "screensavers" in the search bar.
3. In the results, find and click on the line "Turn the screen saver on or off."

A window of the same name will open in which you need to disable the display of the screen saver. Often after this, problems with sleep mode disappear.

Problem #2: Outdated Video Driver

We already know how to turn off sleep mode on Windows 10, but there are problems when it remains and you can’t get out of it. That is, you press the keys, move the mouse, but the screen continues to be black. Often this is caused by incorrect operation of the video card. However, the problem should not be looked for in it, but in the driver. It is possible that you have the standard Windows 10 video driver installed, but you need the latest one from the manufacturer. Go to the NVIDIA or AMD website and download the video driver for your computer, the problem should be gone.

Problem #3: The screen goes blank after turning on the PC

If you have a laptop from Lenovo, then it is quite possible that after turning on the computer, sleep mode is immediately activated. The problem is quite common, fortunately, it is solved quite simply.

1. Go to advanced power settings.
2. Disable the wake timers option.
3. Right click on the start menu.
4. Select the "Device Manager" line.
5. Find "Network adapter" among the equipment.
6. Go to its properties.
7. Disable the wake from sleep option.

As you can see, even knowing how to disable sleep mode on Windows 10, you can still run into problems, fortunately, they are solved quite simply.

Issue #4: Intel Driver Not Working Correctly

If you are the owner of devices from Intel, then you may encounter problems in setting up sleep mode - it is simply impossible to disable it on Windows 10, as well as on other versions of the OS. And the problem lies in the drivers. Everything is diametrically opposed here with the video driver. You need to uninstall the current version and install the old release.

Not all PC users are aware that the Windows operating system has modes to reduce its power consumption. When using them, it is not at all necessary to turn off the computer from the network every time. They are also convenient because they allow you to minimize the PC startup time and get quick access to previously launched programs. Among them are:

• Sleep mode, also called standby.
• hibernation.
• Hybrid mode.

How do they differ?

The main difference between the modes is the way data is stored and later accessed. Sleep mode is available in almost all versions of Windows. It stores the data of the programs executed by the system in the computer's RAM. Its disadvantage is that all data is reset when there is a power outage.

Hibernation, unlike hibernation, saves data to a special file that is stored on the hard drive. It belongs to system files and is called hyberfil.sys. A significant advantage of hibernation is the ability to load the last working session of the system even after the computer is completely disconnected from the power supply. The disadvantages include a decrease in free hard disk space, since the hyberfil.sys file occupies a fairly significant amount of it.

Please note that the computer wakes up from sleep mode in a matter of seconds, while restoring it to working capacity after hibernation can take several minutes.

The hybrid mode is called so for a reason. It saves data in both ways at once: on the hard disk and in RAM. This mode is available only in older versions of Windows (7 and higher). It is quite convenient, because it allows you to get the fastest access to the last working session, regardless of whether the computer was disconnected from the mains.

In order to start hibernation in windows 10, follow these steps:

Ways to control modes

In version 10 of Windows, a quick launch option is installed, the operation of which is similar to hibernation mode. It allows you to get quick access to the working session, saving data about it to your hard drive. Despite the fact that the option is undoubtedly useful, it is not always in demand. Therefore, in order to save free space on the hard disk, it can be managed.

Management in this case is reduced to such actions as:

• inclusion;
• shutdown;
• resizing the file.

Enabling and disabling the option can be done in one of two ways: using the command line and standard OS tools.

Important: to manage fast startup using the command line, you need to run it as an administrator.

The following commands are used for control:

• powercfg -h on - enable;
• powercfg -h off - shutdown;
• powercfg / h / type reduced - file size reduction;
• powercfg /h /type full - restore the size of the hiberfil.sys file.

Sleep mode is controlled in the PC power settings. To enable sleep mode, do the following:

Important: If you are logged in with an account that does not have administrator rights, some actions will not be available.

Windows 10 won't go to sleep for several reasons.

1 reason

The most common reason is when you have some program running on your computer that downloads files, movies, music, or something else from the Internet. In this case, it is enough to close this program and the computer will go into sleep mode.

2 reason

You may have disabled sleep mode in the settings. To enable sleep mode, open the settings by clicking on the Start button on the taskbar and selecting the gear from the menu that opens.

If the sleep mode of Windows 10 is gone, then check its settings

In opened settings go to category System. Then, in the left part of the window that opens, find and click on the item Power and Sleep. On the right side in the second paragraph titled Dream there are two points When powered from the mains, turn off after and On battery power, turn off after. In these items from the pop-up list, instead of Never you need to select the time in minutes or hours. After that, when idle, the computer will enter sleep mode after the time you have selected.

3 reason

It is possible that your network adapter has the function to wake the system from sleep mode. To disable this function, you need to open the Device Manager, to do this, on the desktop or in Explorer, hover over This PC and by pressing the right button, select Manage from the menu that opens.

If sleep mode does not work in Windows 10, then the network adapter settings may be the reason.

A window called Computer Management will open. In this window, on the left side, find and click on the item Device Manager. In the device manager in the right window, find the item Network adapters and open it. Choose yours and open its properties.

Perhaps because of the checkmark, sleep mode does not turn on Windows 10

In the properties of your network adapter, go to the tab Power Management. If this tab has a check mark next to the item Allow this device to wake up your computer then you need to uncheck this box and click OK.

4 reason

A software service may be preventing your computer from going to sleep. To disable this service, you need to press two keys on the keyboard at once WIN+R.

If Windows 10 won't hibernate then turn off the software service

The Run window will open in which you enter the command net start "sppsvc.exe" and click OK. After that, your computer will be able to go into sleep mode. If you run another command rundll32.exe PowrProf.dll, SetSuspendState the computer will immediately go into sleep mode.