iPhone charging cable - his Achilles' heel. It’s amazing that a lot has already been said and written about the problem, but Apple doesn’t seem to be going to change anything. However, why - if in the “pink” universe of the “apple” giant any user can buy a new i-smartphone every year and, what a coincidence, it’s exactly the same guarantee period has a charging cable.

However, we all understand what Russian realities are - to acquire new iPhone Not every user can afford it every year. Frankly speaking, not all users of i-smartphones can easily shell out 1,500 rubles from their pockets for a new original cable, and therefore the request - how to fix the charging cable from an iPhone yourself - is very popular. Well, in this article we will tell you everything about iPhone cable repair.

Why is the i-smartphone cable so flimsy? And it’s all about some truly manic desire by Apple for beauty, at a time when it’s objectively worth thinking about reliability. I can’t help but remember the excellent Russian proverb about a fool who was forced to pray to God. It's about the same situation here. The top insulating layer of the iPhone charging cable is made of beautiful material very pleasant to the touch - a kind of soft touch in a rubber design. In general, it gives aesthetic pleasure, but the trouble is, it’s very flimsy!

What's the result? After about a year, very unpleasant “lacerations” appear at the cleanest bends, and if they are not healed in time, the problem will worsen, first the internal insulating layers will become unusable, and then the wiring itself, after which, of course, the cable will no longer be able to function .

Preventive measures

And now, when the iPhone no longer gives a signal to start the charging process, the user has a question - how to fix the charging. Although, frankly speaking, it is already too late. After all, if you take some preventive measures, you can extend the life of the cable for a long time and you won’t have to resort to complex repairs. So if your cable is still intact, read this section carefully.

Simple and tasteless

For those who are very far from technology and repair, we want to offer a very simple way to protect the charging cable. All you need are two springs from fountain pens - they need to be put on both sides of the cable. We bend one end of the spring and wind it, and when we screw it completely, we bend both ends of the spring a little inward, as if it were held more securely, but be as careful as possible, otherwise you will end up damaging the cable that you want to protect.

So what happened? According to it, it doesn’t look aesthetically pleasing, but it’s so simple and potentially saves you 1,500 rubles. By the way, if you are now thinking - why do I need an original cable for 1500 rubles, I’ll buy a Chinese one for 150, we hasten to warn you. Firstly, 99% of non-original cables do not work with iTunes, they charge - they charge, but you won’t be able to connect to a PC - here again, some cunning Apple schemes are to blame. Secondly, a cheap cable is still much less reliable than the original one, and if the latter is guaranteed to last a year, then the non-original one may die in a couple of months.

A more reliable method

Don't like the spring method at all? Okay, we offer something more reliable and more aesthetically pleasing. Only here, probably, most will have to get acquainted with a new concept - “heat shrinkage”? What it is? A tube of special material, which has the excellent property of decreasing in diameter when heated. So she will help us with the repairs. What else do you need? Any source of fire - a lighter is best.

So, first of all, we take the cable and go to the store for heat shrink (it can be found in any electronics department) required diameter. And which one is needed, you ask? We indicated above that when heated, it will decrease, however, by no more than half, so we need to find a heat shrink that, when compressed, will grip the cable “in a vice”, but at the same time fit onto the Lightning connector. In general, 6-7 millimeters.

Has the required diameter of heat shrink been found? Great, just a little bit left to do! We will protect the cable on both sides, so on the Lightning side (it is smaller than USB) we stretch two pieces of heat shrink, 5 centimeters each. Now we take a lighter and, holding the heat shrink tightly on the cable, heat it up. Don’t forget about our task - it should fit tightly. By the way, if you want maximum reliability, from the Lightning side make the heat shrink overlap so that it covers part of the connector; it won’t be possible to do this from the USB side - it’s too big.

Unfortunately, this method of protecting the wire is only available to users of iPhone 5 and newer i-smartphones. The fact is that the Lightning connector appeared precisely in the iPhone 5; previously, Apple gadgets were equipped with a cable with a different connector, much wider than Lightning. So you simply won’t be able to choose a heat shrink that fits through the connector and, when shrinking, sits tightly on the cable

Real renovation

It should be noted that many preventive measures with heat shrinking are used even when the cable already requires real repairs. That is, in fact, it’s not a good idea to put heat shrink on top of an already torn cable; this is not a very reliable measure, but this type of repair also has a right to exist. However, we are sure that if the insulation is already damaged, more serious repairs are needed and heat shrinking alone will not do. In this situation you will need:

• soldering iron and accompanying materials (rosin, solder)
• wire cutters
• sharp knife
• unnecessary old USB cable (it doesn’t matter which connector is on the other side)
• insulating tape
• heat shrinkage (well, yes, where would we be without it) of two diameters - minimal and 5-6 millimeters
• fire source

As you understand, the work will be serious. However, if you own a soldering iron, everything will be quite simple for you, but if you are just planning to make friends with this wonderful tool, you will have to work a little. So let's get started.

Preparing the USB cable

You can buy a USB cable, but we recommend digging through some old electronics at home. This cable is the most popular, and therefore there is a high probability that the search will be successful. We emphasize that it doesn’t matter at all what happens on the other side, because as soon as the necessary wire is found, we must take the wire cutters and cut off what is there. That is, we should get a cable with a USB connector on one side and a cut wire on the other. Next we will deal with the cut side:

Preparing the iPhone Charging Cable Connector

Good news! It doesn’t matter whether you have an iPhone 5 or an older model - this repair is universal for any cable - both Lightning and the one preceding it.

Connecting the USB cable and the iPhone to the iPhone charging cable

Well, all that remains is to connect the two prepared elements; to do this, you need to solder the wires of the corresponding colors to each other - green to green, black to black, etc. But! Before soldering, you must first put heat shrink with a diameter of 5-6 mm on the cable and heat shrink of a minimum diameter on each wire.

When all the wires are soldered, we slide heat shrink over each contact and heat it.

Then, to be sure, we fasten the wires with electrical tape and stretch heat shrink of a larger diameter onto this structure and heat it.

That's all! The renovation is complete.

We tried to describe the process in as much detail as possible, without leaving dark spots, but if something remains unclear, watch this video -

Hard case

Unfortunately, the above instructions will not work if the cable breaks too close to the connector and the integrity of the metal wires is already damaged - in this case, you will not be able to solder to the wires, you will have to solder to the microcircuit itself hidden inside the connector - this means that you will need to open it completely. Not everyone will dare to do this. But if there are daredevils, we recommend watching this video - it will help you in this difficult task.

Let's summarize

As you can see, repair iPhone charging, if the insulation is already torn, it is not so simple. Although, if you prefer “free” repairs using only heat shrink, which, in fact, is only really good in quality preventive measure, you will probably argue with this statement.

However, our recommendations are as follows - if you have an iPhone 5 and newer models of i-smartphones, protect your cable with heat shrink as soon as you start using it, or when its service life approaches a year. Remember? This is exactly the guarantee Apple gives for it. As for the iPhones, which were not supplied with a Lightning cable, but with a wider one, grit your teeth and put on the spring from the handle, although it won’t look very good. But if you didn’t keep track and the cable is broken - this applies to all models of i-smartphones, then immediately carry out the repair conscientiously, if not on your own, then we are sure that among your friends there will definitely be someone who is friendly with a soldering iron, ask them to help !

I have always considered myself a very neat person and was careful with cables and gadgets in general. Despite years of use, they looked like new. I handled the cable from the iPhone 5s even more carefully, since it was very expensive, and at that time I could not replace it with another: all other Apple devices in the house were charged from the old 30-pin cable.

However, this did not save me. Exactly a year later, the insulation at the ends of the cable cracked and began to fall off in pieces. At some point, I freaked out and tore off the remnants of the white eco-friendly coating, completely exposing the metal braid of the cable. But even after this, it regularly charged and synchronized the iPhone, only occasionally giving a slight shock. I couldn’t bear to throw it in the trash, so I decided to make new insulation for the cable. After all, he deserved it.

How to make a new braid

Nowadays, fabric-braided cables are considered the most reliable, and this is not without reason (remember the old Soviet irons). The fabric fibers give the cable elasticity and do not break down over time. Regular threads not suitable: they are too thin and not very strong. Knitting threads and floss are ideal for our project. They are much stronger and due to their greater thickness, you won’t have to wind them for ages.

What you will need

The beauty of this method is that everything you need can be found at home. If we don’t have a heat-shrinkable tube at hand, then, in addition to the thread itself, we will at a minimum need any glue and scissors or a knife (or strength to tear off a piece of thread).

Thread - 3–5 meters.

Scissors or knife.

Heat-shrinkable tube - 5–10 centimeters.

Lighter or matches.

Any glue.

Choosing a thread

I’ll say right away that any knitting thread will do, even very thick ones. The main thing is that it wrinkles and can be wrapped around the cable like a ribbon. If you are lucky and your wife, mother or grandmother offers you not one, but several options, then choose based on following criteria:

Material. Yarn happens different composition: natural and synthetic. Give up your hipster habits and give preference to synthetics: they are stronger, less dirty and less frayed.

Thickness. It is better to choose a medium thread thickness. It will take longer to wind a thin one, but a thick one will lie in uneven turns.

Color. It's up to you, but keep in mind that the fabric braid attracts dirt even more than the original insulation (especially natural). The beautiful white Apple-style braid runs the risk of quickly turning gray.

Preparing the cable

Before putting a new braid on the cable, it needs to be prepared. If the old insulation has broken down in only one place, it can be left. If it falls off in pieces (as in my case), then it is better to remove it completely, otherwise the turns of the thread will not fit tightly and the braid will move. Also pay attention to the condition of the screen (metal braid and foil): it often breaks near the connectors. You can restore it by tightly winding a couple of layers of ordinary thread.

Let's rewind

The winding process is quite simple, but has its own subtleties. To prevent the ball of thread from dangling and disturbing you, it is better to immediately cut off about three meters and, for convenience, wrap it around something like a matchbox.

We start from either end, right from the plastic. We tie a knot and tightly wind the thread turn to turn with a slight overlap, so that each subsequent one slightly overlaps the previous one.

To protect against kinks, we form thickenings at the edges of the braid. We wind two or three layers, gradually increasing the thickness and making a smooth descent 3-4 centimeters long, so that it looks something like in the photo. Depending on the thickness of the thread, there may be more or fewer layers. If desired, you can make it thicker. This will not be very neat, but it will be reliable.

Further - easier. From the formed thickening we simply wrap the cable along its entire length to the very end. Take your time and try to pull the thread as tightly as possible: the quality of your cable will depend on this. Remember the overlap! The coils should lie on top of each other, turning into a continuous web. Press the braid with two fingers and pull along the cable. If the coils fall apart, it means the overlap is insufficient.

We finish winding the same way we started. We wrap it up to the plastic, go back 3-4 centimeters and repeat a couple of times to make a thickening that will protect the cable from breaking. Try to lay the turns more evenly - this way the transition will be neater and stronger. There is no need to tie the free end of the thread yet.

Securing the edges

There are two options: heat shrink and glue. I tried both and I can say that you don’t have to bother with the tubes - the glue is quite enough. I'll tell you about both, choose for yourself.

The diameter of the heat-shrinkable tube must be selected based on the thickening at the end of the cable (and vice versa). 6 and 8 mm tubes work well. Cut two pieces a couple of centimeters long and put both on the side of the Lightning connector. One will remain on it, and the second needs to be pulled through the entire cable to the other end.

Now carefully heat the inserted pieces of heat-shrinkable tubing so that they tightly fit the thickenings of the braid and its ends do not unravel. This can be done with matches, a lighter or by bringing it to the stove, but it is better to ask your wife, mother or grandmother for a hair dryer. With it, you do not risk overheating or smoking your pipe (especially if you have one white).

Lazy people and those who do not have heat shrink can secure the ends of the braid with glue. A bottle of regular PVA or any other can be found in every home. Saturate the thickenings at the ends with it and fix it by pressing with two fingers (you will wash your hands later). When the glue dries, it will hold the turns of our braid no worse than heat shrink. The advantage of this method is that it is suitable not only for Lightning, but also for the old 30-pin connector, which will not fit any heat shrink.

If you are not lazy and you have heat shrink, you can first coat the ends with glue, and then put heat shrink on top.

Using the method described, I brought life back to four cables and gained some experience. You will do better if you don't repeat my mistakes. Here's what you need to pay special attention to:

Too big thickenings. Don't overwork the edges of the braid or they will end up rough and ugly.

Long pieces of heat shrink. Like the previous mistake, this one will also make the cable less flexible and untidy.

Small overlap. If you make a mistake here, you will end up with not a continuous coating, but a collapsing spring of thread.

Natural thread. Eco-friendly yarn is more likely to get dirty and become shaggy over time.

Double thread. If you use two threads different colors, the braid will be not only durable, but also beautiful.

What's the result?

In two months, such a simple and uncomplicated cable upgrade proved to be just great. It is more flexible, it is not scary to pull it or throw it in a backpack. Appearance It's also far from the sloppiest.

I repaired my Lightning, my wife’s old 30-pin cable, and then my sister’s Lightning using this method. While writing the article, I also decided to make a braid on the Mac charger, even though it is still completely new and has a whole cable. It takes a minimum of time, but brings maximum benefits.

Spend half an hour and make yourself an eternal cable. It's worth it!

Briefly: Accuracy is the sister of talent.

Official Lightning cables fray and break - they break. We recommend that you accept it. But with desire and patience, extend the life of each. Use editorial experience website, which was multiplied by Internet opinion.

1. Scotch tape, electrical tape, etc.

To protect the wire more, instead of having two areas of potential wear, wrap the cable from end to end. And as a replacement for adhesive tape or tape, use thread and other similar materials.

2. Heat shrink tube will help

To make the first method aesthetically pleasing, use heat shrink tubing. Such devices are sold in a number of sizes in hardware stores. The price is minimal - a couple of tens of rubles per set.

Place the heat shrink tube over the potential break on top. And heat with a lighter, hair dryer or iron. The polymer will shrink in size and wrap around the cable. Choose a white tube to enhance the aesthetics.

3. Ballpoint pen spring and more

The official Apple Lightning cable looks aesthetically pleasing with a silver metal spring made of ballpoint pen. But not every one will do. I advise you to visit a stationery store and take apart a couple of things to look for them.

Sugru is recommended as a replacement for this method on forms. It's like plasticine for fixing things around. Use it to seal potential cable breaks. And after drying, the substance will turn into a polymer a la rubber.

4. Careful use/carrying

Editorial members website have been using Apple devices for years. And they agree on one opinion - to prevent Lightning cables from breaking for months, carefully use and carry each one in your pocket, bag, and so on.

5. Using Apple Substitutes

I have personally used Lightning cables from third-party MFi manufacturers. I tried the “noodle” type and similar official ones in leather, fabric and metal. They didn’t wear out, but they stopped working after 5-9 months for no apparent reason.

On the forums they recommend buying a microUSB (female) to Lightning (male) adapter. And use it together with a thicker microUSB cable. This wire is cheaper and breaks less often. We haven't tried it, but we believe it.

Possess at a high price and not always good quality. The most vulnerable point of Apple smartphones is the breaking and deforming cable. Since the surface of the Lightning cable is glossy, it is not always easy to grip and many people often pull on the wire! If your cable is tired, don’t rush to AliExpress or Taobao, because Chinese exercise can play a cruel joke on your smartphone. Native charging is important for an iPhone, so let's try to preserve it. We offer you three budget life hacks to extend the life of the cord!

Lifehack No. 1 - electrical tape

If your iPhone gets damaged, remember to use good old duct tape. We rewind the break point of the cord with electrical tape and rejoice at the result! Perhaps with such a “repair” of the cable, the esthete inside you will be upset, but with practical point vision, electrical tape will come to the rescue in an emergency.

Life hack No. 2 - spring

A simple life hack will help you prevent your Lightning cable from breaking at home. To do this, we need two springs from ordinary ballpoint pens. We take the handles and take out the springs from them, bend them at both ends to make it easier to wrap around the cable. The cord often bends at the base, so we attach a spring there and screw it onto the cable. This must be done carefully so as not to damage the insulation. To completely protect the cord, we perform the same manipulations on the other side of the cable. After such a little trick, the cord will not bend enough to damage the contacts. It is worth remembering one thing: this procedure should be carried out with the cable not yet damaged, so that there is maximum benefit.

Lifehack No. 3 - heat shrink tube

If the Lightning cable is already damaged, then resuscitation with springs will not help it much. This is where heat shrink tubing comes to the rescue - a thin-walled plastic tube for insulating wires and other electrical items. You can find this miracle device in any hardware store or electrical, it costs a penny. The tube should be slightly smaller size repairable cord and adhesive inside. The tube is put on a cord and you will need a hairdryer to fix it. After heating, the heat shrink tube shrinks tightly. As a result, you will receive a cord that is aesthetically pleasing and practical to use.

Now the solution to the problem with deformed cords is up to you. But if there are no problems with the cable, and the iPhone has stopped charging, check the charging connectors for dust and dirt. Do this with a toothpick, but be careful not to damage the contacts. Take care of your iPhone!

Cable wear mobile device- age-old device. It doesn’t matter if it’s a cord from headphones for sports or a charger cable neatly laid under the sofa - sooner or later it becomes unusable. In this sense, owners of Apple devices stand out much more than others. This does not mean that iPhone or iPod cables are much worse than those of Android devices. It’s just that most Android devices have a universal micro- or mini-usb connector, for which even at home it’s easy to find a replacement - a cable from another device with the same connector. Apple technology has its own interface, unique in some way, and replacing it will cost you a pretty penny. The situation has not changed at all with the release of a more advanced and “smarter” lightning cable. It has become more convenient, but the “childhood sore” has not gone away.

No matter how carefully you handle your cord, it will bend during use, break and fail. Any twisting of the cord, pulling the plug out of the device by the cord itself, impact external factors, heating - all this contributes to gradual wear. The polymer protective cord breaks, the shielding breaks behind it, and then the signal wires break, which leads to signal loss, inability to charge (according to the manufacturer, inside the Lightning wires there is an authentication chip, which is an active element of dynamic contact switching), and in some cases - failure of your phone or tablet.

There are a lot of cheap cords from unknown manufacturers on the market. But their use on many Apple devices It’s simply impossible: a smartphone can detect a fake cable, which it signals on the screen and disables interaction with the cable. Using unofficial cables of questionable quality to charge and synchronize your device can also cause your expensive smartphone to break down the charging controller and other problems.

Some reputable manufacturers have taken these problems into account and have developed special cables for extreme use, but their cost is often comparable to the cost of several new original cords.

If you don’t want to risk using cheap cables, and don’t want to overpay for the original iPhone cable (the cost of the cable can often exceed $30-40), you can try to extend the life of the cable. This will worsen the aesthetic appearance, but will allow you to significantly delay the date of failure of the fragile connecting cord. One of the simplest and most popular ways to protect a Lightning cable from wear and tear is to use a regular spring from a ballpoint pen. All that is required of you is to find an old unnecessary handle with a spring at home (or better yet, two), bend the end of the spring a little so that one end can be put on the cable. Then we screw a spring onto the cable. We repeat the same with the other end of the cable.

If you want to not only extend the life of the iPhone cable, but also maintain its aesthetic appearance, you can use heat shrink tubing. Heat-shrinkable insulating tubes, popularly called heat shrink, are designed to perform protective, insulating, anti-corrosion and decorative coatings, sealing of wire and cable cores. Such a tube costs from 2 UAH per meter in wholesale quantities, and you can buy it retail on the radio market for about 10 UAH. It looks normal flexible tube made of a special material that shrinks and contracts 2-4 times under the influence of temperature.

You will need to cut a piece of the required length, put it on the wire and warm it with a stream of hot air.

In this condition, your wire will last much longer and, importantly, will look aesthetically pleasing and stand out from the rest.