Drawers for kitchen units. Filling for kitchen cabinets. One big one is better than two small ones

It happens that you don’t get around to cleaning up your kitchen drawers. Everything is piled up there: chipped coffee cups, a jar of cinnamon, the lid of a favorite saucepan. When you suddenly need something, you will have to turn it all over when searching.

Avoid chaos and confusion in the kitchen. Review all places where things accumulate. Organize their storage with maximum convenience and benefit. And we will tell you how to do this. Keep cups ready.

They should be in a drawer about 20 cm deep. Taking them from there is much easier than taking them out of a hanging cabinet. It is better to place them upside down to protect their edges from accidental chips. On the side, make room for teaspoons, bags or jars of tea, coffee, and sugar.

To prevent upside-down dishes from slipping, equip the drawers with rubber liners, which are sold in hardware stores. This is a must for storing fragile glasses in the kitchen.

Keep your dishes fully stocked

There are many ideas on how to maintain it. As for the pots, the lids should be nearby, but in separate compartments.

Pots and pans are usually standard sizes. It is likely that the lids can fit any container. Therefore, there is no need to store them all here. In addition, this is an obvious space saver.

A specially equipped place for clean lids. This is definitely a wonderful way to store them.

Two-level pull-out shelves on the countertop make it possible to store pots and their lids.

In order not to look for the lid of a plastic container every time, build shelves like those in our photo. To save space, similar containers of different sizes can be inserted into one another.

Equip knife storage

Cutting kitchen tools should not be placed in a common pile with other cutlery. You can cut yourself with them while choosing the right thing. Make a place for them on the countertop. It is convenient to remove them from there, and they themselves will remain sharp and safe.

Advice: Do not keep sharpened objects in sight of children.

Donate 20 cm of the cabinet: make a wooden pull-out block for knives.

Make a side tray

This is another good use of limited space. The narrow drawer holds cutting boards, decorative trays, and other flat kitchen accessories.

This additional board is needed so that onions, garlic and apples are not cut on the same surface. It is quite stable and at a comfortable height. Furniture fittings, which can be bought at a specialized furniture store, allow you to equip all this yourself, without the involvement of a specialist.

Don't waste space by placing a removable cutting board on top of the drawer.

Enjoy your storage systems

The one who came up with drawers that close with a slight push of the foot deserves an award. They can be upgraded depending on the design of cabinets and chests of drawers. But try not to accidentally hit them.

The drawer, which can be closed against a push with your foot, is convenient for horizontal storage of bottles of wine. Although you can put anything here: table linen, kitchen towels, documents and books, a supply of chocolate, valuables.

Advice: The kitchen area is not the best place to preserve the quality of wine. It's always hotter here than in other rooms of the house.

Add air to closed food trays

To rationally use and save refrigerator space, equip ventilated storage areas for vegetables and fruits. When using a mesh screen, uncooled lemons and oranges remain juicy, and potatoes and tomatoes retain their taste.

Wicker baskets provide fresh air access to vegetables and fruits. They also bring country style motifs into the modern kitchen interior.

Crispy, freshly baked bread is the most delicious. If possible, you should eat it immediately after baking. And it should be stored in cool, but not cold places, protected from stray pests. Therefore, it is necessary to have bread containers with lids.

Advice: Freeze the slices for 2-3 days - you will find many uses for them.

For example, croutons for first courses, summer pudding with berries and bread crumbs, and vegetable salads with pieces of garlic bread are very tasty.

Appetizing exhibition

If you like Moroccan and Asian cuisine, then you cannot do without spices. When placed on a shelf, they save not only space, but also time. It’s very easy to remove the lid and take a pinch of the seasoning you need.

Set up a multi-purpose drawer near the cooktop to hold jars of herbs and spices, can openers, tongs and other tools. Find a place here for bandages and burn creams. In the drawer, an insert with holes for metal or plastic buckets will help get rid of clutter.

Advice: Each bucket is separate for items made of metal, wood, and plastic. Then it will be easier to find the right thing.

Remove moisture immediately

Therefore, you should always have a roll of paper at hand. Make a niche for it with a rod in one of the drawers. Then spilled liquid and splashes will be eliminated in a couple of moments.

Plumbing equipment usually has awkward shapes. Therefore, do not try to use the space next to it to the maximum. Otherwise, this place will be a comfortable haven for insects that love warmth and moisture. And it’s better to move things that are not used every day, say, to the laundry room.

Practical use of space under the sink - symmetrically arranged pencil cases with shelves for cleaning products, with rods for kitchen towels and paper rolls.

Sort your trash

For each type of container there should be a separate container: for example, one contains recyclables, the other contains food waste.

Advice: The design, such as in the photo, allows you to remove filled heavy containers from the side, rather than lift them above the front lid of the cabinet.

In a small household, it would be unnecessary to waste space on tall garbage containers. You can get by with buckets or bins as holders for garbage bags.

Equip a box with outlets for connecting electronics.

To rationally organize space indoors, it has become fashionable to use boxes, drawers and baskets. Some may think that such containers a priori make the interior untidy and overcrowded. But in fact, this is not at all the case: on the contrary, if you choose drawers in accordance with the style in which the room is designed, you can add interesting notes to the decor.

Such storage products are convenient in everyday life and are also distinguished by their mobility. In addition, the stores offer a huge selection of containers of different sizes and types, which allow you to conveniently place various small items, children's toys, books, clothes, shoes and even tools. Such storage boxes and baskets will fit organically into any interior.

Types of storage boxes

Mobile containers are designed to store things of different sizes and purposes. racks open type, shelves of cabinets, cabinets, chests of drawers. There are also models of boxes that are stored under the bed, or are simply free-standing structures. As a rule, such containers are much more spacious and can be equipped with wheels for moving.

Containers and boxes for storing things are divided into two categories - closed and open. The valve can be tilted or completely removed. Containers equipped with a lid are considered more practical in comparison with their open counterparts - it is needed to protect things from dust, sunlight, moisture, small children and four-legged pets.

The height and shape of the product depends on its purpose, as well as on the material from which the box is made. Regardless of the design of the container, the sides and bottom usually have a rigid frame for maximum ease of use. Some models have soft or hard cellular structures with compartments of different sizes. For convenience, containers are equipped with locks and handles.

According to their purpose, trays and boxes can be universal or specialized, that is, intended for toys, tools, bottles, kitchen utensils, books and other small items.

Materials used for making containers

Various raw materials are used to produce boxes:

• cardboard;
• rattan;

• plastic;
• metal;
• tree.

Metal storage boxes

In stores, models of this type are presented in a large assortment. They are made from sheet steel. Such boxes are welded and so-called knitted. The latter can be made from thick steel wire or rods.

The main advantages of metal storage boxes:

• high strength index;
• durable;
• reliability of fittings;
• easy to carry.

Disadvantages include susceptibility to corrosion.

Advice! Metal boxes are convenient for storing men's work tools and glass containers.

Plastic baskets

These containers are the most popular. They come in various shapes and sizes. Such plastic structures have many advantages, including:

• low cost;
• strength;
• resistance to precipitation;
• light weight.

The most economical place in any home was and remains the kitchen. As a rule, it contains many different household appliances, dishes, household appliances and food products concentrated in a small space. In this regard, the question becomes relevant: how to most effectively use the space in the kitchen to accommodate all the items?

Small tricks of “kitchen” life

It is worth paying attention to some techniques used when arranging space inside cabinets.

The appearance of kitchen furniture is just a screen behind which hides a huge set of all kinds of useful tools for everyday life. It is important to arrange them so that the necessary thing is easy to find, and also so that each item is visible. Think through all the nuances of storage, create ideas - this will allow you to rationally and, most importantly, functionally manage the space inside the drawers of your kitchen furniture.

Therefore, for every woman, these tips will become real helpers that will allow you to truly enjoy being in the kitchen and the process of cooking. Let's try to figure out what techniques can be used?

Experienced designers advise making the lower floors of cabinets with retractable shelves, avoiding the standard option with opening doors. The pull-out option will allow you to easily reach items located in the back of the closet. You can reach everything you need without bending over or turning everything over. This option will allow you to save a lot of space inside your kitchen furniture.

One big one is better than two small ones

Storage drawers with high side and back edges help you make more efficient use of interior space. In this case, it is better to choose one large box than two small ones. The absence of unnecessary partitions will have a beneficial effect on saving internal space.

If the kitchen drawers are not light, then you should take care of equipping them with air suspension. This will make them easier to open.

The shock absorber and closer will allow your drawers to open more conveniently and smoothly. A variety of trays dividing the space in the closet will also be a convenient aid for maintaining order. Transverse and longitudinal dividers of this type can be rearranged in the closet to places convenient for you.

Keep items you use more frequently at the front of the drawer, or reserve space for them under the countertop in lightweight drawers.

What about drawers without handles or transparent options?

Drawers without handles look great. To open them, you just need to press on them a little. You can also consider an interesting option - drawers with transparent sides. Thanks to this design, you can see where everything is. Why not hide several drawers behind a single façade? This will also save space in your closet.

You can't do without a dish dryer

An integral attribute of kitchen furniture is a dish dryer. It can be placed either independently or as a filler in a kitchen cabinet. Items such as dryers are made from metal or plastic, but are always very durable.

How to use the cabinet under the sink more efficiently?

Of particular interest is the space under the sink. Since there are pipes and other water supply structures there, this is the most difficult place to use. In this case, various trays and baskets will help you. You can build a retractable U-shaped system by attaching a structure of shelves to the back of the door. The U-shape will allow the item to adapt to the shape of the water supply system. This solution will make it possible to make the most efficient use of the space inside the sink drawer.

For corner kitchens, a “carousel” is suitable

Corner kitchens are considered the most difficult to use, since they lose a lot of usable space. A rotating carousel can solve this problem in such a case. Its rotation angle is 270 degrees.

It allows you to combine several shelves around you, the desired one of which, thanks to rotation, can become closer to you. This will make the most useful space inside the corner kitchen. The design will fit both the lower and upper corner cabinets. It can be used not only inside kitchen furniture, but also outside (option attached to the furniture facade).

"Magic Corner" - truly magical

One of the universal inventions is the magic corner. It is usually attached to the door and is a rotating device equipped with various drawers. The corner is perfect for a swing or corner cabinet.

What about the lifting mechanism?

Hanging cabinets can be equipped with lifting mechanisms. This approach will avoid the option of doors opening in different directions. Your door will open vertically, that is, upward. Special latches for ease of use can hold it in the open position. The mechanism of such a door resembles a kind of elevator.

There is room for a column in the kitchen

A mesh structure called a column is designed for use in tall kitchen cabinets. Thanks to this, you can place about five specialized baskets in one closet. For ease of use, they are equipped with special guides that allow the drawers to be pulled out to their full amplitude.

If we choose a column, we can be sure that such a design will allow us to literally inspect everything that is placed in our box in a matter of seconds and also quickly push the structure back to its original position.

How much a column will ultimately cost depends on the material from which it is made, as well as on what fittings are used to construct the product.

How to store glass bottles without breaking them?

Let's take a closer look at the bottle holder - a specially narrow space created for storing bottles. Several such niches can be located one after another. The bottle holders extend at the same time and perform the main task - they provide instant and comfortable access to the bottles that you have in the kitchen.

Under certain circumstances, such equipment can be adapted for storing bulk seasonings in jars, as well as cereals.

Modern technologies will hide the trash can

We have listed a lot of modern devices that have appeared not so long ago to make your life in the kitchen easier and more comfortable. Progress has not spared the good old trash cans either. Today they can be extended in a variety of ways, can be equipped with retractable structures and a variety of pedals and valves that make their appearance automatic. Urns are often very conveniently and almost unnoticeably built into furniture. The convenience of such systems is that the bins are easily removed from them and can be replaced without obstacles.

Railing systems

Today, various railing systems are gaining unprecedented popularity. And they are a pipe attached to the base of the wall, onto which various items of kitchen utensils are attached, for example, onion or nut peelers, graters, ladle, various large spoons for frying pans, a colander and other items. Such designs allow you to get additional free space in the drawers, while the appearance of the kitchen from their appearance will not become sloppy.

Despite the fact that all objects will be open, this design looks extremely aesthetically pleasing and interesting. That's what it is, railing. You can try it.

What else is there room for in the kitchen?

In addition to standard methods of filling kitchen furniture, you can try a variety of techniques. Install an ironing board in the kitchen, special equipment for storing pans or pots, equip it with bar devices for storing cocktail glasses or wine glasses, install a non-standard system where you will dry clean dishes.

Created for convenience, a variety of cornices, hanging elements and carousels can be supplemented with original containers for spices. Shelves, racks, holders, stands - these are little things at first glance, but they make a significant contribution to the process of putting things in order. These items are essential for every family. Let's take a closer look at the features of small accessories designed to make cabinets more convenient to use.

Open or closed furniture?

When decorating a kitchen, there is such an extraordinary option as furniture with open cabinets. It has its pros and cons.

Among the advantages is lower cost. They are cheaper because they require less material to produce due to the lack of doors. What’s convenient about such furniture is that all the items are at your fingertips. You don't have to open and hold the sash.

The openness of the shelves will allow you to aesthetically arrange a variety of interesting containers, as well as household items or dishes. If done correctly, this move can make your interior much more interesting.

Minuses

Such a decision as purchasing open shelves also has its own “dark” side. If you do install a similar version of shelves, then take the time to always keep the kitchen in order. If guests unexpectedly visit, they may be seriously confused by carelessly scattered coffee cans, various bags, boxes and other items.

The absence of a door results in more intense accumulation of dust. Therefore, you will have to wipe not only the shelves several times a week, but also everything placed on them.

When planning the installation of this type of cabinet, think in advance where and what you will put. On which shelf, what dishes will you place? Please note that problems may arise in the future when purchasing dishes - they simply will not fit into your “open interior”.

It is also worth noting that open shelves are less spacious, because you cannot stack objects on top of each other in them. Otherwise, you will be faced with an unpleasant state of chaos in your kitchen. In general, heavily stocked shelves will not only not decorate the interior, but rather, on the contrary, will make it unattractive.

Kitchen set with doors - a more convenient solution

A set with closed doors will accommodate more items that can be placed more closely together. You can also stack boxes on top of each other there. You don’t have to worry about the accumulation of dust and clutter, since all things will be hidden from view. It must be remembered that a set with doors will be almost twice as expensive as a similar open model.

Wall cabinets

Wall cabinets are very convenient for the kitchen. They are ideal for dishes, cups, mugs, etc. Most often, the place for such a cabinet is located directly above the sink.

A drying rack is often placed in the top tier to allow water to drain from dishes. This design helps dishes dry faster. At the bottom of such a cabinet there are usually food containers.

It's no secret that a good craftsman starts with a good tool. And any tool must be stored carefully. In this material we will talk about how to make a tool box with your own hands. At the same time, use available materials in your work.

In addition, there are tools that cannot be simply stored in bulk. For example, files or drills. From friction against each other, these objects become dull. And during work, a tool carelessly lying around forces you to waste time looking for it.

So - we need a box to store the necessary devices, consumables and fasteners.

Making your own tool box

To begin with, let’s define its purpose and functionality. What it is and what it should be.

Portable tool box

It holds a small number of items, usually the configuration corresponds to the type of work. Such a box must have a strong lock so that it does not accidentally open during transportation. During movement, the instrument should not dangle inside; each element has its own niche, and is secured if possible.

Stationary tool box

True, this is a relative concept. They just don’t carry such a box with them to the place of work. It can be carefully moved within the workshop.

This design does not provide mounts for tools, but they are arranged in compartments and, as a rule, divided into groups.

Specialized tool box

Unlike the first two options, such storage is intended for a specific group of devices. For example, wrenches, or a set of bits and drills for a screwdriver. In addition to the main contents, maintenance materials are usually placed in such boxes.

Such devices are more convenient than universal ones, but you will need several of them.

Therefore, before manufacturing, you need to decide which option you need. First, take an inventory of your tools. Arrange them by groups and sizes. And it will immediately become clear to you how many boxes and what size you will need.

How to make a tool box

Selecting material:

• Metal tool box. It's not that easy to do. Welding may be required. A self-made steel box will be too heavy to carry, but it has its advantages. A heavy and bulky tool will not break the cells so quickly. You don’t have to be too fussy about carefully laying out a 38x52 key weighing half a kilogram. A heavy set of socket heads will not break the wooden bottom.
  But for devices with sharp sharpening, or files, it is not suitable. The best option is to install such a box under a workbench. You just need to install a limiter to prevent the heavy pallet from falling on your feet. When making a mobile or portable version, you can use thin sheet metal and make a box following the example of factory designs.
• Another option to follow is an iron cart with drawers for tools and accessories. This design is popular in car repair shops. For a home workshop, this is an ideal option, but production is fraught with technical difficulties;
• If you need the same strength and functionality, try making a tool box from plywood. The strength will decrease slightly, but processing such material is much easier. Before making a box with your own hands, draw drawings. The craft should be neat and match the size of your instrument. For the main body, choose a thickness of 8-10 mm. Buy wheels (if you need them) at a hardware store. All connections must be with screws. The nails will quickly become loose. The joints are additionally coated with PVA glue. Boxes with cells can be made from 6-8 mm plywood. The frame walls are made of thicker material, the bottom and cells are thinner. If the tool is not too heavy, we choose hardwood blocks as guides. You can screw metal corners.

  note

  If you have additional funds, buy roller guides at a furniture accessories store.

  
  Then you will not be afraid that the box will fall on your feet. Wide and low pallets are perfectly divided into sections by internal partitions. The more there are, the easier it is to sort tools and consumables according to their intended purpose. A DIY tool box provides ample opportunities for creativity;
• DIY wooden box. This is a carpentry classic. Drawings of such a portable storage facility were published in the Young Technician magazine 50 years ago.
  To make it you will need a board 10-20 mm thick and a hacksaw. That's all. Therefore, despite the many modern designs, old-school masters choose this option. The classic design does not provide compartments or other functional devices. Just a deep box and a comfortable handle along the entire length. This shape of the handle has practical significance. If the weight of the tool is unevenly distributed, the center of gravity point can always be found, so it is always convenient to carry the box;
• A practical addition would be an insert section with its own handle, which occupies 50% of the drawer in height. This insert is used for small tools (screwdrivers, awls, small keys) and consumables (drills, screwdriver bits, etc.). It can be made from plywood or thinner wood. A large tool is located in the lower (main) compartment. Hammer, drill, plane, large pliers;
• If a wooden box does not require constant carrying, you can make a box with a retractable lid. There are several of these containers of the same size. They are placed on racks, and at the end an inventory is made of what contents are there. A completely different structure can be made from wood and plywood. Dressing table box (only without mirrors).

Your repost will change the Internet :)

Organizing the kitchen space is the most important task of any housewife. After all, the mood of the housewife and the speed of cooking directly depend on how comfortable and functional the interior is. What kind of shelves and drawers can there be in order to make the most of the available space and accommodate everything you need, where to get them and where to place them, we will now look in detail at .

You can make some of the drawers and shelves presented here yourself, some will have to be made to order, and for some you can go to the store.

Drawers and shelves

The advantage of drawers is that everything you need is always at hand and clearly visible.

Or this option: you just open the door, and the rear shelves slide out after it.

Convenient to store bottles, spices and cereals.

Or these pull-out shelves - a mini pantry

Such durable shelves perfectly accommodate dishes for guests, cereals and pasta.

You can even hide a vacuum cleaner and other cleaning supplies

A pull-out shelf like this allows you to store bottles of oil, vinegar, sauces and seasonings in a small narrow space near the stove. Neat and always at hand.

Exactly the same pull-out shelf for sauces and butter, but below, to the right of the oven.

If space allows, you can make a drawer with wider shelves and conveniently place everything you need there.

The wide drawers fit perfectly everything you need: forks, spoons, butter sauces and numerous spices.

Well, this is simply the pinnacle of design thought. On the verge of perfection.

Pull-out cutting boards

How often do we regret that we cannot move the kitchen closer to the TV. With such a mobile table, this problem is solved one, two, three times.

Here you can chop garlic, prepare a salad, and that’s it – without leaving the cash register.

Pull-out cutting boards are good because they do not take up additional space, and if necessary, they are always at hand.

A cutting board with a hole is ideal for preparing salad: just place a bowl underneath and cut with pleasure.

Wicker baskets in the kitchen

There is an opinion that wicker baskets do not look good in the kitchen, only worsening the appearance. However, this is not the case. Pull-out wicker baskets can brighten up any room.

and are perfect for storing vegetables, since the vegetables are well ventilated in them

Any man can make such a device for storing bread and baguette.

One movement of the hand - and fresh baked goods are always on the table.

Storing forks, knives and other kitchen utensils

Finding the right scoop or frying pan will not be a problem if you have a drawer like this

Pull-out table in the kitchen

Thinking through it, many housewives come to the conclusion that it is necessary to install a retractable table here.

You can use it both for everyday breakfasts and for preparing for a banquet.

Almost any retractable top shelf can be converted into a retractable table by placing a suitable sheet of plywood or plastic on it.

Storing pots and pans

A good housewife has a great variety of pots and pans, and it is not always possible to keep them at hand. Such cunning devices come to the rescue in such a difficult task.