The baby crib is made of wood. DIY children's bed: drawings, decor ideas and step-by-step instructions. Video: making a double podium bed from chipboard

Parents strive to provide the best for their children. In stores and markets, prices are rising all the time. This applies to any goods, including furniture. Adults are forced to save on a lot. They often have to decorate their home on their own. A children's bed made with your own hands will cost less than one bought in a furniture showroom. Making a cozy bed for your baby is easy. This is done in a couple of days. Here you need to have a desire to work.

Children grow up quickly, and furniture is quite expensive.

To make a bed with your own hands, you need boards and beams made of wood that does not absorb moisture well, for example, pine or oak. First, two pairs of legs are made. For the headboard, the supports should be longer, since the back is higher here. This is necessary in order to be able to raise the pillow higher and recline in bed, for example, while reading. Typically, a do-it-yourself baby bed is made using the following materials:

• bars;
• plywood;
• boards;
• PVA glue;
• stains;
• varnish

In a regular crib, a child can sleep for three, maximum four years.

Natural wood does not emit harmful substances, so babies do not have allergic reactions. Such furniture is reliable, durable and looks good. A properly made crib is the key to a comfortable sleep. If the room is small, the product is made in such a way that it serves as a playpen during the day. The size is taken based on the length and width of the mattress.

The bed should be as comfortable and functional as possible.

Usually you don’t make it yourself, but buy it in a store. Children's mattresses, as a rule, are developed together with orthopedists. Here, special attention is paid to the correct formation of the spine, and the needs of the child’s body to obtain healthy and restful sleep are also taken into account.

In fact, a do-it-yourself bed for a child is made “on time”; you can do it.

For children over 4 years old, buy a mattress with a spring block, where the individual elements are combined by a metal frame. On it, the weight of a sleeping child is evenly distributed over the entire area of ​​the product. For infants, it is better to use mattresses without springs, consisting of foam rubber. In a child's bedroom, it is advisable to install the bed away from the window opening. This will guarantee that the child will not be blown through by a draft.

To make a baby crib with your own hands, you do not need any professional skills, and the process will take a maximum of 3-4 days.

There should not be a chandelier hanging above the child’s sleeping place. Light bulbs often burn out. Sometimes it happens that when a lamp fails, its glass scatters in different directions. A glass shard can easily injure a child. If there is a shelf for books hanging above the baby, you should make sure that it is nailed to the wall firmly enough.

The main thing is to use only high-quality materials and carefully think through the entire process from start to finish.

Basic details of wooden beds

Although wooden products for babies are expensive, individual parts can be purchased at a reasonable cost. It is advisable to carefully sand the purchased blanks with your own hands so that the child does not get hurt on any protruding splinter. The product consists of the following parts:

• frame;
• slats;
• sidewalls;
• backrest;
• legs

As a result, both the child and the baby himself will be happy.

The frame is made of planed and well-polished boards. The slats that support the mattress from below consist of slats. They are inserted into grooves cut into the frame and form a grille for ventilation of the mattress. The distance between them is approximately 5 centimeters. The sides serve as a fence, thanks to which the child will not fall down. The supporting backs are filled with plywood sheets.

But if the baby has a large build, the parameters of the blanks can be changed upward.

To support the mattress, special grooves are cut into the frame. Wood glue is applied to the slatted ends. The slats are inserted into the holes. To make the fixation more reliable, self-tapping screws are screwed in from the outside. The backrests are made using vertical beams connected by crossbars. Next, plywood or wooden rods are installed.

Furniture stores have a huge variety of crib models for different ages.

The back and front sides are filled with strips and fixed with glue. The near side is made one third lower than the far side. This makes it more convenient to care for your baby. The holes in the cross bars are filled with PVA glue. Then the wooden fencing rods are inserted there. The parts must fit into each other tightly, without any backlash. Use a square to check the correct angles. All angles must be 90 degrees. The assembled sides are placed on a flat surface until the glue dries completely.

But the first factor in choosing a crib for a child should be the material from which the piece of furniture is made.

Necessary tool

If you poured a lot of adhesive into the grooves, some of it will, of course, come out. There is nothing to worry about here, since in the dried state the glue can be easily cut off with a knife. Next, the remaining panels are attached, which will serve as the headboard and footboard. They are screwed to the sides with countersunk screws. Each screw must be completely recessed so that their heads cannot be felt. Later, these recesses are covered with putty and sanded. During operation, the following tool is used:

• wood saw;
• manual frezer;
• Sander;
• corner;
• screwdriver.

If necessary, we clean the shields over the entire surface.

After the bed is assembled, it needs to be decorated. To do this, all the cracks between the connected parts are covered with putty. When the putty is completely dry, the treated areas are sanded with fine sandpaper. Next, the assembled structure is treated with stain. This will protect the tree from the negative effects of moisture. After the stain has dried, a layer of varnish is applied. Since the furniture is intended for a baby, all impregnations must be natural, not containing toxic or aggressive substances.

The only drawback of wooden furniture sold in most stores is its sky-high cost.

During assembly work, the mounting screws should be screwed in to the maximum possible depth so that they are completely recessed. The resulting depressions are later closed with plugs or covered with putty. The assembled structure must be strengthened with special corners. Next, the finished product is coated with varnish or wood wax. If you decide to add wheels to the crib, then do not forget to make locks for them.

A DIY children's bed will cost parents a maximum of 17 thousand.

Advantages of hand-made children's furniture

If the baby's room is small, the crib can be made with drawers. They are convenient for storing toys, bedding and baby clothes. Such functional furniture saves space and eliminates the need to clutter the room with additional cabinets or chests of drawers. The advantages of a homemade children's bed are:

• the ability to design a model that fits perfectly into the interior of the room;
• confidence in the quality and reliability of the product;
• the ability to use only materials that are safe for health;
• relatively low cost.

Designing and making a crib yourself has advantages over buying a finished product in a furniture store

When all the parts and working tools are prepared, you need to carefully consider the process of making the bed itself. This type of work is best done outside the home, as there will be a lot of sawdust and dust. If it is not possible to work outside, indoor furniture should be covered with plastic wrap and the carpet should be removed from the floor. For a small room, you can make a bed, the sleeping place of which is on the second tier. Below, instead of a bed, a soft carpet is laid on the floor. This option will be convenient if you have only one child.

The best option is two large drawers so that you can put large toys and bedding in them.

On the first floor the baby will spend time playing games, and on the second tier he will climb a ladder to relax. Usually the process of climbing to the second floor gives children great pleasure. If a child likes to draw, you can put a small table and a chair on the ground floor. For two children, a regular bunk bed is made. Structurally, such products are designed differently. The lower floor can be located exactly under the upper tier, or located perpendicularly.

For beauty, the crib can be opened with primer and varnish.

Sometimes steps are also used as lids for the boxes underneath them. In each such box you can put children's toys, linen, and clothes. Before you start making a bunk bed, you need to decide on the place where it will stand. You also need to decide which side is best to mount the stairs to the second floor. If the room has a low ceiling, the upper tier should not be very high.

After you decide on the size and appearance of the bed for the child, look at photos of popular models on the Internet and find the necessary drawings, you can begin making a royal bed for the baby

The closer the child is to the ceiling, the more stuffy air he will have to breathe. On the other hand, it is advisable to take into account that an adult should not rest his head on the second tier when he sits down with the baby. The height of the first tier is associated with the comfort of sitting on the bed, as well as with the fact that a drawer for bed linen can be built below. Based on this information, we can conclude what dimensions the furniture being constructed should have. The most popular options for cribs are as follows:

• transformer;
• sliding;
• one-story;
• two-tier;
• rocking chair

To ensure that the dimensions of the mattress and crib match, it is better to first buy a mattress, and only after that proceed to drawings of the crib.

The transformer usually folds up during the day, thereby freeing up space in the room. For this model, a special frame is attached to the wall, where the folded product is removed. In order for the visible façade of the bed to fit into the overall style of the room, it should be decorated. The extendable bed is made of two parts. As the child grows, it can be lengthened. For this purpose, special wheels are located at the bottom. A two-tier model is most often made for two children.

The tools you will need are a drill, a jigsaw and a grinder.

Manufacturing conditions for bed parts

If you purchased wood material directly from a sawmill, then before you start making parts, the bars and boards need to be kept for about a week in the room in which the manufactured furniture will be located. This is necessary so that the humidity of the room is equal to the humidity of the materials. Otherwise, in the future, some parts of the bed may crack or warp. When the material acquires the required parameters, the boards and bars must be planed and thoroughly sanded.

All materials can be easily purchased at a hardware store.

The vertical beams of the bed should be of such a height that sides and backrests can be built above the top bed. The front side of the lower tier is most often made removable. A crib guard is an important safety feature. Its reliability should be given special attention. The fencing boards are screwed to the support beams with self-tapping screws from the inside. The caps must be completely screwed into the wood. During the manufacture of the fence, you need to leave an opening for the steps.

For a small room, a similar version of a crib with a second floor would be perfect, but there would be no first floor.

Stairs are usually made strictly vertical or inclined. First, two beams are attached, which will act as guides. Then the steps are screwed on. The top step and the ladder itself are attached to the bed with long bolts. After the fence and steps are installed, plywood sheets are laid on which the mattresses will be placed. Since all parts of this product are attached with screws and bolts, it can be easily disassembled and moved to another location.

This process usually gives children a lot of pleasure, and sleeping on the second floor is much more interesting.

This bunk bed is very durable and reliably serves for many years. If you paint it beautifully and then cover it with matte nitro varnish, it will not reflect the glare of the sun and will retain the naturalness of the designs for a long time. The inside of the sides can be lined with soft fabric, which will protect the baby from drafts and bruises.

If a child goes to school, or just likes to draw a lot, the space under the bed can be equipped with a desk.

Thus, even in a small children's room there will be more space for games and other entertainment.

VIDEO: DIY crib.

For the proper development of a child, it is important not only the play area, but also the recreation area. The life of a child is associated with play, with copying the everyday life of adults, and if you have a desire, you can greatly diversify the life of your children by making beds for children with your own hands, for example, in the form of a car, a house, or even a ship.

Such a bed can be purchased in a store, but it will cost a lot of money and, as a rule, furniture with such a design is not mass-produced, and it is not easy for production to complete an individual order, as it requires large expenses. Therefore, the cost of such furniture has always been high. But you can make a crib for a newborn with your own hands according to drawings and photos.

What material to choose for making a bed for children with your own hands

In order to make a children's bed yourself, you need to purchase some materials and tools. It is best to make baby cribs from wood with your own hands; coniferous species are suitable for this: pine, cedar, spruce. You can use plywood or MDF. It all depends on your capabilities and abilities.

When making beds for children with your own hands, it is preferable to use natural wood, as it is more environmentally friendly than other materials. Wooden furniture has always been highly valued for its qualities, which include strength, durability of the product, and beauty. When using a wooden bed, children's sleep will be much stronger and more peaceful. But before you begin the creation process, you need to purchase a mattress. Because the stock will be made exactly according to its dimensions. And it doesn’t matter whether you make a bed for a girl with your own hands or for a boy. It is better to buy a mattress in a store. Fortunately, modern industry makes them for every taste.

Choosing a mattress

When purchasing, you just need to take into account some features of the product you are purchasing:

You also need to take care of purchasing paints and varnishes. you can choose a shade depending on whether you are making a bed for a boy or a girl with your own hands. Well, in addition, you will need to purchase carpenter's glue for the possible connection of parts of the structure being created.

What paint is best to use when painting a crib?

Furniture manufacturing plants usually use oil paints; antiseptic agents are added to them to protect the wood from rotting, and they give the products a bright color. This has a positive effect on the appearance of the product.

The varnishes used to cover the surface of the bed are water-based. They highlight texture and are pleasant to the touch. But there is no need to wash the surface treated with such products with active detergents, as it quickly becomes unusable. It will be enough to wipe the surface with a damp cloth. To paint a homemade children's bed, you should buy compositions with non-toxic components.

In this case, a good option might be:

Some people want to see the wood texture of a homemade bed without being covered with paint, then it is necessary to use acrylic varnish. It has no pungent odor and can withstand ultraviolet rays. All other varnishes are either highly toxic or short-lived.

If it is possible to purchase more expensive types of wood, such as ash, larch, your product will look richer, but remember that these types are more difficult to work with, since they have a completely different, (more dense) wood structure and are difficult to process.

All materials can be purchased at hardware or specialized stores and timber trading centers.

Painting a crib

Acrylic-based paints are used to coat furniture during finishing. The process is simple, but it takes time.

Before painting the surface, you must carry out the following steps:

1. Disassemble the bed into its component parts.
2. Prepare surfaces for painting: sand the surface with sandpaper. If there are old layers of paint or varnish, treat them with remover and remove them with a spatula.
3. Degrease the surface, especially if there are resinous places in the form of knots on it. This can be done with any solvent (it is better to use solvent or turpentine).
4. If necessary, repair minor surface damage with putty.
5. Before painting, after sanding, be sure to prime the surface.
6. Apply paint or varnish (at least three layers) using a brush, paint roller, sponge or rag. You can use a spray gun, but this will result in a large consumption of paint and varnish material.

After applying the first layer of paint or varnish to a previously primed surface, you need to wait until it dries. The painted surface can be sanded again. This is done in order to remove small wood fibers from the surface that have risen as a result of staining. After this, apply two more thin layers of paint or varnish one by one.

It is recommended to carry out work on making a bed and carrying out paint and varnish finishing outside the living space, preferably in a specially designated room for household needs.

What tool do you need to have?

To make a children's bed with your own hands at home, you will need a minimum of tools. As a rule, every owner has everything he needs in a drawer.

To make a sleeping place for a child, you will need:

1. Plane. Necessary for possible trimming of the ends when assembling a do-it-yourself crib from wood.
2. Drill with a set of different drill bits
3. with a set of bits or just a set of screwdrivers, but it is better to have both tools.
4. Chisel, hammer or mallet.
5. Carpentry clamps, you can make them yourself to compress parts while gluing them. It all depends on the complexity of the project you choose.
6. A sanding machine with a set of sanding pads, or just sandpaper of various grits. But then the processing process will take longer.
7. An electric jigsaw with a set of saws for sawing wood, plywood, MDF, or a hand saw. But then again the quality and speed of work will be significantly reduced.
8. You will also need wood screws and furniture fittings to assemble a children's bed.

The number of tools will depend on the materials from which you will make the children's bed. If it is a board, then you need to take into account the degree of its carpentry. In the case when these materials are made of plywood or MDF, their sizes and appearance.

What details are the main ones in the design of a bed?

You can buy all the parts for making cribs for children with your own hands ready-made, and then complete the assembly yourself, or you can purchase a “semi-finished product” and make all the structural components from it, based on the size of your bed.

The main details include:

• bed legs;
• tsars, transverse and longitudinal;
• slats for setting the bottom of the bed;
• headboard;
• side guards.

All the above parts connected together form the basis of the product. The methods for assembling a children's wooden bed with your own hands and attaching the parts may be different, as it depends on the design features and the material from which it is made.

For example, if the bed is made of wood:

1. The drawers must be well planed and sanded. Make grooves in them for installing slats on which the mattress will lie. The distance between the holes should be no more than 5 cm. This indentation is necessary to prevent the mattress from falling through the cracks between the slats, which will lead to premature wear of the mattress. The slats are either glued to the frames or screwed with self-tapping screws.
2. Side rails are designed to prevent a child from falling out of bed while sleeping. Making your own children's bed with sides will help protect your baby from injury. They are attached to the backs of the structure using self-tapping screws, or they can be inserted into pre-prepared grooves.
3. Bed headboards can be of different designs. If the system is framed, then it can be filled with a plywood panel, which is easy to make yourself, or you can order it from craftsmen to make a wooden panel, but this will cost more.

After assembling the bed, the question arises about choosing decor for the product. Inaccuracies made during the manufacture of parts will appear during the assembly process in the form of cracks. If there are any on a wooden product, they will need to be covered with putty and subsequently cleaned with sandpaper.

It is also necessary to prepare a primer, stain and varnish. We must not forget that paint and varnish materials must be environmentally friendly, since the bed is made for a child.

What design of a children's bed to choose

There are many options on how to make a child’s bed yourself. Which model to create depends primarily on your skill.

When choosing a design, you must take into account:

• dimensions of the children's room;
• child's age;
• the child's wishes;
• your capabilities.

If you are looking for how to make a bed for a girl with your own hands, you can consider several options. For example, it is not difficult to make a two-tier bed: with a bed at the bottom and at the top, if you have two children. A two-tier bed is also suitable for one child. In the area of ​​the second tier you can make a bed for relaxation, that is, a bed itself. And the lower part will be a play area, or combine play and work areas. For example, put a desk there where the child will do his homework. You can make improvised windows from fabric and give the bed the look of a small house. Since making a bed for a child yourself is not difficult, you can get creative and create something very original. For example, build a baby rocking bed with your own hands using drawings and photos from the Internet.

Crib in the form of a house

If you want to make your own children's bed from 3 years old, we offer an option in the form of a house. Such a design is not difficult to manufacture and with the minimum of tools listed above, you can safely get to work. When making such a bed yourself, you can adhere to a free style and experiment with proportions and colors, while taking into account the preferences of children.

As an example, let's take a bed design with dimensions:

• height 178 cm;
• length 175 cm;
• width 91 cm;
• mattress measuring 80 x 165 cm.

Tool:

• hacksaw or electric jigsaw;
• screwdriver;
• drills with a diameter of 6, 10 mm;
• measuring instrument, pencil, ruler, square, tape measure;
• wood glue;
• sandpaper for grinding and cleaning the surface;
• self-tapping screws size: 4.5 x 30, 6 x 70 mm;
• wood glue for gluing parts together.

For this design, you need to take 13 square bars, preferably 45 x 45, the length of the bar should be:

• standing supports 1200 mm – 4 pcs;
• cross beam 829 mm – 2 pcs;
• roof rafters 730 mm – 4 pcs;
• axial bars for roof 1660 mm – 3 pcs.

To make the bottom of the bed, two beams are suitable, the size of which is 38 x 67 x 1660 mm and 2 slats 9 x 67 x 1660 mm, as well as slats.

Since we need to make a bed house for a child with a roof, we choose a gable option so that the parts fit tightly together, we file the upper edges at an angle of 45 degrees.

To make the walls, we use 1200 mm long posts in this design. They will act as load-bearing supports to which the roof of the bed - house - will be attached. For its manufacture we use timber 730 mm long.

Bed in the shape of a car

Your children's delight will know no bounds. What are the features of making this type of bed? Considering the activity of children, it does not matter to them whether this is a regular design or whether it has play functions. A child's bed is subject to greater stress, despite significant differences in weight.

Features of the crib-car:

1. An important requirement for such a product is the strength of this design.
2. When creating, you should take into account the dimensions and make it for growth, since in this case you won’t be able to make an extendable children’s bed with your own hands.
3. Equally important is compliance with safety during registration and further operation. This refers to the selection of paints and varnishes, the material from which the bed itself is made, various stickers and electric lighting. All this must comply with a certain safety class.

When making a bed frame - a machine, you need to take into account your experience and the weight of your child. The base is a frame structure with legs, or a box, which is reinforced with transverse crossbars. When making a car bed for a boy with your own hands, a beam with a cross section of 50 x 70 mm is used; during assembly, the frame is reinforced with metal corners. The headboard and headboard, as well as the sides, are attached to it. We must not forget that the size of the frame must correspond to the size of the mattress, a difference of +1.2 cm is allowed.

It is preferable to make the bottom of the frame where the mattress will be placed from slats, although it can, if necessary, be made solid from plywood 10 mm thick.

The main design detail of this design will be the side panels, imitating the silhouette of a car. They are made from plywood, chipboard or MDF. It can be made from wood, but if you do not have the skills to glue wood, then it is better to choose any of the above materials.

DIY crib for a newborn - drawing, video

Assembling a machine bed

First, you need to develop a design for a children's bed. A specific car model is taken as a sample. Here it is important to observe the parameters, colors, and line bends. In general, you will need a design drawing. Then you need to make a template for the part and cut the material according to it. Also, using the children's bed project with your own hands, you need to prepare the details of the headboard and footboard of the bed. Next is your improvisation and imagination: you can make headlights and a car bumper by drawing them, or you can make them from scrap materials.

The machine can make a children's bed in two ways:

1. All decorative elements are attached to a wooden frame.
2. The composite decorative elements themselves, depicting the outline of the car, are a frame.

In both cases, you will need to make your own drawings of children's beds. The blanks are made using templates, cut out of plywood or MDF using a power tool, the edges must be sanded, and thermal tape is glued to them.

Of course, it wouldn’t hurt to equip this bed design with fake wheels and a steering wheel. But masters do not always create such details. The presence of a steering wheel can create problems in maintaining the bed. But you can draw the wheels or make them yourself, this will complicate the design a little, but what can you do for your beloved children. The bed can also be equipped with night lights and installed in the form of sidelights and car headlights.

As you already understand, the choice of materials for this crib design is quite extensive. When using plywood, furniture wood panel or MDF, this type will take 1-2 sheets. You can purchase confirmations and keys to them at a hardware store. Using screws you will connect the parts of the bed - cars.

The holes into which fastening materials enter are best closed with plugs, or, at worst, puttied. But if it becomes necessary to tighten the fasteners, the putty will have to be picked out for a long time, and it will clog the screwdriver socket. Therefore, it is better to stick to plugs. The drawer fastenings must be reinforced with metal corners, this will strengthen your structure as a whole.

6 basic steps on how to assemble a bed machine

1. We assemble the frame in the form of a frame structure or assemble a box with the installation of partitions. It is better to fasten parts using confirmations, having previously drilled holes for them.
2. Prepare the sides and end backs by cutting them according to a template from plywood or MDF, or other material.
3. Carry out an approximate assembly of the structure in order to identify and eliminate errors during the manufacture of bed parts. After removing defects or if there are none, the parts are prepared for painting.
4. In a bed model where the side decorative structures are the frame, preliminary assembly is also required.
5. After painting and subsequent drying, the bed parts are assembled using self-tapping screws and confirmators. The screw heads must be hidden with plugs. Rollers can be installed at the bottom of the bed frame, if desired.
6. The last step will be to decorate your baby crib with various attributes, such as a steering wheel, imitation car tires, headlights, and so on. It all depends on your imagination.

Advantages of making a baby crib with your own hands

In fact, you can make many models of children's sleeping places, as well as beds for teenagers, with your own hands. It all depends on your desire and imagination, as well as the child’s dreams. A do-it-yourself sleeping place has a number of advantages over what the manufacturer of consumer goods offers us.

Advantages of DIY design:

1. A do-it-yourself add-on baby crib is created taking into account all the needs and wishes.
2. You can build in drawers for things. This will save you from purchasing additional furniture.
3. That the quality of their own work is several times different from what is offered by enterprises that produce consumer goods.
4. The bed is made only from safe materials.
5. The cost of the product will be much less than the price of the product offered for sale in a furniture store.

If you have an urgent need to buy a sleeping place for your child, don’t hesitate, feel free to get down to business. There are always ideas for making a baby crib with your own hands. And you will not only gain the experience you need in life, but also receive respect and recognition from people close to you. And how happy your children will be.

Drawings of children's beds of different designs

DIY bunk bed for children - video

For a newborn baby, the main place of stay is the crib. Parents try to choose only the best and safest for their children. However, quality items are quite expensive. The price of some imported cribs is prohibitively high. But what to do in such a difficult situation? Buy a cheaper model whose quality leaves much to be desired?

Remember an important rule: saving on the health and well-being of your children is unacceptable!If you don’t have the opportunity to buy a good-quality crib for your child, then a DIY crib for a newborn is exactly what you need. It may be inferior in design to its store-bought counterpart, but you can be absolutely sure of the quality of this furniture. A do-it-yourself crib for a newborn, made with love, will become your child’s favorite resting place and a source of pride for the whole family for dad’s skillful hands.

DIY crib for a newborn - manufacturing technology

This article provides all the necessary information on how to make a crib for a newborn with your own hands: drawings, photos and a detailed description of the process. The choice of material is not an easy question. The table below describes the most common types of materials for making a DIY crib.

MDF crib

Crib made of chipboard

Wooden crib

To begin with, you need to prepare all the necessary tools, materials for the crib and its decoration, components and be patient.

Materials for work

The best material for making a crib for a newborn is wood.. This natural resource is environmentally friendly, safe, does not cause allergies and is pleasant to the touch. Recognized as the best wood for children's furniture beech: It is very durable and aesthetic. It might also be a good option oak, birch, ash and alder. Pine wood is quite soft and may not withstand the active pressure of children. So, You will need the following supplies:

Tools for work

In addition to materials, you will need to prepare a set of tools in advance:

• Level gauge and tape measure for measurements;
• Rasp;
• Manual milling machine;
• Hammer;
• Drill and suitable drill bits;
• Varima;
• Woodworking machine;
• Electric jigsaw.

Now, in more detail about how to make a crib for a newborn with your own hands: drawings, photos and instructions will help you understand this matter.

We determine the overall dimensions and draw up a drawing

The starting point is the crib mattress, or rather its dimensions. Spare no expense and buy your baby a high-quality mattress with a “complex filling” made of coconut fiber with layers of latex. The usual size of a children's mattress is 1200 x 600 mm. You will find out what other children's mattresses there are from the table below.

Spring mattress

Springless mattress

Cotton wool mattress

The dimensions of the mattress are fundamental to determining the size of the crib. The height of the bed from the floor should be such that an older baby can climb into the crib on his own. It is recommended to make it equal to 350 mm.

The distance between the lattice and the solid wall of the crib is 12 mm, and between the rods - no more than 9 mm. Such indicators guarantee the safety of the baby. Based on these points, you can prepare a schematic drawing, which will make it much easier to work with.

How to proceed?

Now you have all the necessary components to make an excellent do-it-yourself crib for a newborn: drawings, photos of the model you like, and it’s time to start the manufacturing process. First, let's prepare everything necessary for assembly.

We produce materials and make crib parts

The following types of work need to be performed:

• Process wooden boards using a machine, which should be 70 x 35 mm in size;
• To construct the bottom you will need timber from which the frame is made. You will also need 6 transverse bars, in which you will need to make nests measuring 25mm;
• These notches can be made either on a machine or with a straight cutter;
• To calculate the back frame, you need to add to 600 mm the thickness of the side walls, multiplied by two and another 25 mm;
• For the bars of the lattice walls of the crib, 20 x 20 mm slats are needed, which are rounded on a milling machine.

Do not forget that this crib is made for a child, so all sharp corners and edges should be rounded and sanded.

Assembly of parts and finishing

When all the parts are ready, it's time to put them together:

1. We assemble the back frame using a 35 mm tenon;
2. We connect the side wall blanks with poles and two backrests using blind tenons;
3. Use glue to connect the back to the side walls. After the glue has dried, you can connect the parts with self-tapping screws;
4. After all the parts have been assembled, the crib can be covered with finishing material. Remember that at this stage the child's safety comes first. Therefore, all finishing materials must be absolutely harmless to the baby. Choose water-based primer and paint. The varnish layer must always be sanded.

If you choose varnishes, then buy those with the NC marking. Only such materials are allowed for use on children's furniture.

How to assemble a crib yourself?

If you decide that a do-it-yourself crib for a newborn is too much for you and you bought a ready-made one in a store, then, for sure, upon arriving home you will have a lot of questions about assembling this piece of furniture.

If you are sitting at a loss in front of a pile of parts and cannot figure out how to assemble a crib, instructions, photos and recommendations will help you in this matter. In order to correctly assemble all the parts, you need to follow these steps::

1. All parts must be moved to the children's room. This will save you from moving the already assembled crib. Moreover, in this case the question will not arise: how to squeeze the bed into the doorway;
2. Unpack the box. Inside there is definitely detailed information on how to assemble a crib, instructions, photos and a list of necessary tools. As a rule, this is a screwdriver, a reversible wrench and a hammer;
3. Check the availability of all crib spare parts according to the list. If something is missing, then immediately contact the seller for a replacement or return of the product;
4. If suddenly there are no instructions, then you can check the complete set of all parts without it. Know that all cribs typically consist of the following elements: upper and lower parts, rubber furniture wheels, a support structure for the mattress and the mattress itself, two side thin boards. Inspect all parts carefully for defects.;
5. Now let's proceed directly to assembling the crib. Screwing the screws should start from the bottom and side backs. The screws must be loosely tightened. Next, we connect the back wall using 2 screws to the side backrests;
6. The next stage is the front side of the crib. Most models have this part solid and movable. This element must be inserted into the grooves on the side parts. Next, firmly holding all the fasteners, we check how freely the facade moves;
7. For rocking a baby, arc-shaped components that are located on the lower part of the side walls will be useful. When the baby grows up, they will need to be secured in metal grooves in the sides;
8. Critically evaluate the strength and stability of the entire structure, the strength of the bottom, the absence of sharp corners and material defects ;
9. Next, we place the mattress in the crib and decorate the children's sleeping place to our own taste.

These simple instructions will help you assemble a new crib purchased in a store yourself without involving a specialist.

Assembling a pendulum crib

The pendulum crib differs from all other analogues in the presence of a baby rocking system. This function is very convenient for the first months of the baby’s life. However, difficulties may arise with the configuration of this model. But a further description of how to assemble a crib - a pendulum: instructions, photos and a step-by-step guide will help you deal with this issue.

This type of crib consists of a frame, bottom, sides, legs and a pendulum mechanism. Also, such models can be equipped with special drawers for baby clothes and linen. The mechanism itself can swing up and down. When the need for it disappears, the structure is fixed.

Assembly is carried out according to the following scheme:

1. You will need all the elements of the crib, a work plan, screws, damping devices and a screwdriver;
2. The work area on the floor should be covered with a light cloth to prevent loss of elements;
3. We fasten the static back wall with screws to the side backrests. To avoid confusing the top and bottom of the back wall, use the legs as a guide;
4. The next stage is the installation of the bed. It can be either solid or slatted. The slats are inserted into special holes in the bar of the rear wall. At first, the stock is secured lightly with screws. The movable front part is attached to recesses on the side backs of the crib, which serve as guides. Next, the screw connection should be tightened more firmly;
5. Next, the finished body can be turned over and the pendulum system can be assembled. If the model has linen drawers, they are placed in the internal space of the pendulum. Next, its side panel is secured with screws. The housing is mounted on the pendulum using bearings. Make sure that the notches of the clamps line up exactly. Caps cover screws for an aesthetic appearance.

A do-it-yourself crib for a newborn, carefully prepared for the baby, or purchased in a store that meets all safety requirements, will become the best place for your child to rest and sleep and will deservedly take a central place in the interior of the children's room. To carry out these manipulations, it is not necessary to call a specialist. Thanks to this guide on how to assemble a crib - pendulum (instructions, photos and recommendations), you yourself will cope with this task perfectly.

19.09.2017

Furniture made at the enterprise, although beautiful, is devoid of warmth. And I really want my baby to have a cozy bed, made with love and care. That is why many fathers create children's beds with their own hands. The child will remember furniture made by dad for the rest of his life.

Material options

The material plays a special role in making a crib. Today, store shelves are overflowing with children's furniture made from...

1. natural wood;
2. Chipboard and MDF;
3. metal;
4. plastic and synthetic materials.

Furniture made from natural wood is considered the safest from an environmental point of view - this fact has long been scientifically proven. Wood does not have that specific smell that artificial materials have. She is able to create a favorable, warm and cozy atmosphere for the baby, which has a positive effect on his health. It is worth noting that natural wood will always look expensive and solid. Products made from this material will fit perfectly into any interior.

MDF is a board made from fine wood chips pressed under high pressure. From the point of view of environmental characteristics, it is close to those of natural wood. Furniture made from MDF is considered safe for children's health.

In the production of chipboards, formaldehyde resins are used, so during operation they can emit substances harmful to health. But for many, the deciding factor is price. Chipboard models have the lowest cost.

Products made of plastic and synthetics can be bright, very beautiful and stylish. But are they good for the child? Young parents often do not realize that toxic substances are used in the production of these materials. Therefore, it is important to remember that during operation, harmful components will be released and harm the baby’s health.

Design elements

The main elements of a children's bed are:

• bottom;
• sidewalls;
• backrests;
• frame strips (frame);
• legs.

Cots also come on wheels. In models of this design, it is convenient to rock a baby to sleep; such cribs are easy to move around the room, if necessary. Some have rocking runners. There are also combined legs: the wheels can be replaced with runners, or you can unscrew them completely. There are also cribs in which the swing is provided by a hinge.

Children's beds can be made in the classic style familiar to everyone. However, today wooden models made based on the plots of fairy tales and cartoons are gaining increasing popularity. Undoubtedly, both models will look good in a nursery.

However, often beds made in themed decor take up too much space.

This is their main drawback, because not everyone can boast of a large living space. Often the crib has to be pushed into a very limited space. Therefore, sometimes, in order to save free space, homemade beds of the required dimensions are made:

• two-tier;
• transformers;
• attics or houses;
• with drawers and shelves.

This piece of children's furniture can be anything you want. The main thing is to comply with the basic requirements: the bed must be:

• safe;
• comfortable;
• beautiful.

Sketches and drawings

If you decide to make a bed with your own hands, then it is advisable to draw a sketch yourself, make a drawing or diagram, which will depict the future “nest” for your child. In such a drawing, all dimensions must be accurately maintained, down to every millimeter. The strength and reliability of the structure will depend on this.




A drawing or sketch of the future design will greatly facilitate the entire process of manufacturing parts and subsequent assembly. The exceptions are. These are quite complex projects to make yourself. As a work plan, it is better to take a sketch made by a professional designer:




Manufacturing and assembling elements of a crib is a complex process. It requires special attention and great responsibility. Even a minor error in work can lead to dire consequences: the bed can break and injure the child.

Required components

Before starting work, you need to stock up on materials. Buy:

• Edged boards.
• Bars, the cross-sectional size of which must be no less than 50x50 mm (needed to make the main frames of the structure).
• Slats with a cross-sectional size of 20x20 mm (will be used for filling, for example, making logs).
• Self-tapping screws and bolts.

It is worth going to large stores that have building materials in their assortment. Here it immediately becomes clear that the wood offered comes in different qualities. You need to choose straight boards with the fewest knots. This will greatly simplify and speed up the process of grinding all elements.

Important! Whatever the bed is made (the most ordinary, classic or made for a specific theme), you need to remember the rule - bars and slats must be made of especially strong wood. The quality and further service life of the product depend on this.

Tool

Despite the fact that the children's bed has a simple design and can be assembled by anyone, it is still necessary to prepare. Before starting work, prepare:

• roulette;
• drill;
• circular saw;
• Kreg Jig set (a special device for drilling holes at an angle);
• adjustable measuring angle;
• wood glue;
• screws 30, 50, 60 mm;
• water-based varnish;
• stain;
• brush;
• sandpaper;
• wood putty.

Step-by-step photo report

Let's take the following model as an example:

First you need to choose a suitable mattress. All elements of the future design will be manufactured. Then purchase the necessary building materials - edged boards, timber, slats, water-based varnish, stain, sandpaper and a brush:

Prepare the necessary tools: tape measure, drill, drill bits, circular saw, Kreg Jig set, measuring angle, bolts and screws of various lengths. These things should always be at hand.

Work begins with assembling the racks and sidewalls:

Using a square, make sure that all corners of the assembled structure are straight. Mark the places where the sides will be fixed:

Once the parts are sanded and all the holes are drilled, you can apply a little wood glue to the joints. Without waiting for the glue to dry, remove excess with a napkin.

Fastening of sides with racks:

If necessary, the boards must be fastened from the inside at an angle. To drill pilot holes, use the essential Kreg Jig. This is a convenient and easy to use tool.

Attach the sides of the future bed to the posts:

The crib frame is almost ready:

Now attach the sides of the second tier:

Then prepare the places where the logs will be attached under the mattress:

First fill the unevenness and knots of the frame, then sand it. Next you need to make a ladder to the second tier.

Apply a first coat of water-based varnish. In this case, Lakra “Oak” was chosen. One of its advantages is that it has almost no smell. This is important since there are small children in the house. However, it also has a very unpleasant drawback - it is almost impossible to sand it, and even after drying, a sticky layer remains:

Staircase view:

The staircase in this form is not entirely convenient - it “cuts” the legs, so it will need to be slightly modernized. But more on that later.

The top floor is already ready:

It is clear that the sides need to be increased. There is no need to add anything from the wall side. The bed will be close to the wall, which means there is nowhere to fall. On other sides this will definitely need to be done.

Now about the stairs. To avoid the awkwardness and pain of going down it, lightly sand the edges of the rungs with a hand planer or sander. This procedure will give them a neat appearance:

The result of the work:

As a result, you will get a reliable and stable structure. Now we can say with confidence that making such a bed yourself, given the abundance of materials and necessary tools that fill the shelves of hardware stores, is not at all difficult.

You will find more ideas and tips for making a two-tier structure.

Decoration

Canopy

Bed dress

To sew a pillowcase, sheet and duvet cover, it is best to use natural, breathable and at the same time beautiful fabrics. The following are perfect: flannel, calico, satin, poplin.

Mattress cover

To protect your mattress from moisture, you usually use a waterproof mattress protector. Moreover, it is not difficult to do it yourself. To do this, a structure is made consisting of oilcloth (inner part) and knitted, flannel or calico fabric (outer part). To prevent the mattress cover from slipping, an elastic band is sewn around the perimeter of the product.

It is important for parents that their children grow up in a comfortable atmosphere, and that their sleep is not threatened. If a person has a minimum set of tools and basic knowledge, then DIY children's bed it won't be difficult to do, provided you have it on hand photo, product sketch, blueprints. The arrangement of such furniture is simple.

Layout and dimensions of a crib for a newborn

Parents know that a crib for a baby, especially from one to four years of age, is especially important, because the child sleeps a lot. The right furniture is the key to a comfortable sleep. For small apartments, such a crib in a nursery can also replace a playpen.
It is easy to make in two to three days and provides all the subtleties and nuances for the child’s comfort.

The right furniture is the key to a comfortable sleep

The first step is to figure out what elements this structure will consist of.

• Mattress. It is selected based on the weight and age of the baby, so it is better not to make it yourself, but simply purchase it in a store. The purchased mattress was developed jointly with orthopedists and takes into account all the body’s needs for comfortable sleep and the correct formation of the child’s spine. Mattresses are divided into two main types: with a spring block and without springs. The version with springs can be on an independent spring block (each spring is placed in a separate bag made of non-woven material and the load on such a mattress is distributed pointwise) and on a dependent spring block (the springs are united by a metal frame, and the weight of the sleeper is distributed evenly over the entire area of ​​the product).

  

  Comfortable hanging baby cot

  These mattresses are best purchased for children over 5 years old. And for children with low weight, products on a springless block are recommended, where the frame itself, as a rule, consists of polyurethane foam or foam rubber and, depending on the degree of rigidity, can be supplemented with coconut coir or other materials.

• Frame. This element is made based on the size assumed by the mattress of the sleeping place. The material for it is most often planed board.
• Lamels. These parts of the product are designed to support the mattress from below and are strips inserted into the furniture frame. They form a lattice with a distance between each other of about 5 cm (for ventilation of the mattress).

  

  Making a baby crib with your own hands, master class with drawings and photos

• Sidewalls. They provide a barrier to prevent the child from falling out of the crib. Depending on the wishes of the parent, they can be high or low, solid or carved. Byltsa (back of the product). At the headboard their height will be higher than at the feet.

  

  Drawings and photos of a crib for a master class

• Legs. This element can be made with your own hands or purchased at a specialized furniture fittings store. They can be initially planed on the sides of the crib, or they can be screwed to it.

Crib drawing

Deciding on the model

In a children's room, several types of beds are most often used:

• With drawers
• Loft bed
• Bunk bed (if there are two kids in the room)

If the room in the children's room does not allow for a large bed to be placed in the room, and you need a compact model that can save square meters, then it is better to choose a design with drawers. Drawers are used to store bedding, toys, children's things and anything that does not fit in a child's chest of drawers or nightstands.

Baby cot on two levels for small children

In order for the furniture to turn out to be of high quality, it is necessary to select environmentally friendly materials for its manufacture. The ideal material would be thick plywood or wood. MDF or chipboard, which are popular in the furniture industry, should not be purchased for the manufacture of structures due to the adhesives used in the manufacture of materials. Chemicals can negatively affect the baby's body, causing allergies.

An original bed for a stylish interior of a children's room

Advice: It is not recommended to make a crib smaller than 1.5 * 0.6 meters, but you should not make it larger than 1.8 * 0.7 meters. A child will quickly outgrow a small crib, and if you make it too big, the baby will not feel comfortable in it.

The base for such furniture is made solid; it can be purchased ready-made, or you can simply use a sheet of plywood instead.
Its dimensions should be based on the size of the purchased mattress. A lattice can be purchased as a base, but plywood can be used as an option, since the child’s weight is not so large.

The ideal material would be thick plywood or wood.

Wooden shield. It is better to use wood with a low resin content, for example, birch, linden. The size of the shield is recommended to be two meters long, 60 centimeters wide and about 3 centimeters thick.

On the furniture board, the future outline of the workpiece is drawn with chalk according to the dimensions of the sketch. If it is necessary to make holes on the sides of the structure, then they are drawn using a champagne glass or using a regular glass.

Furniture board and plywood can be cut by purchasing them in a store. As a rule, most stores have such services, but it is necessary to provide dimensions in millimeters and patterns. It is recommended to make the cut yourself using a jigsaw, but if you don’t have a jigsaw at hand, you can cut the materials with a regular saw.

Furniture board and plywood can be cut by purchasing them in a store.

After cutting, all wooden elements are sanded using sandpaper so that the materials from which the crib is made do not scratch the baby’s delicate skin.

If it was not possible to find aluminum corners, then they are cut from an aluminum profile. The details of the bed must correspond to the sketch drawings. And the length of the corner from the profile should match the length of the side back of the furniture. These fasteners have holes for inserting self-tapping screws. The sides are attached with corners to the bed frame or plywood base, and this structure is tightened with eight self-tapping screws.

Original children's bed in the shape of a car for a boy

Initially, the parts are attached on one side, then the future workpiece is turned over to the side. According to the diagram, you should periodically check the order of fastening of the elements and the location of the parts. To ensure that the product is stable and strong, watch out for distortions and displacements of parts relative to each other. The bed walls are attached to each other and pulled together; if there are no holes in the walls, then they are made using a drill.

The frame part of the product is ready, it’s time to assemble the back, which will be located above the child’s head. If desired, it can be made in any shape, the main thing is that this piece of furniture fully fulfills its function, that is, protects the baby from injury.

Carved wooden crib for a newborn baby

Very often, small children raise their heads up in their sleep, so the sides here should be at least 10 centimeters in height. Another benefit of high sides and headboards is that they prevent toys and bedding from being thrown out of the bed.

Original baby crib for a boy

We make a headboard: we take a furniture board, from it, if desired, you can make a carved back that looks beautiful and noble or decorate it. The design of the headboard and backrest at the feet should match so that the design looks organic.

We make a headboard: we take a furniture board, from it, if desired, you can make a carved back that looks beautiful and noble or decorate it.

We screw the legs to the bed body itself, which we purchase at a furniture fittings store. We do this using long-length self-tapping screws.

All elements of the bed frame are additionally carefully polished, right down to the slots and cutouts, so that the child does not get hurt by putting his fingers in the slot.

Tip: A smooth sanded surface can be achieved using a drill with an attachment or a grinding machine.

Decorated, polished backrests are attached to a frame frame. So that the fasteners are not visible, they are drilled from below, pointing the drill upward. Cutting holes should be as careful as possible, because this part is easy to damage. We make the hole for the tie ourselves; it will be difficult to make it in this place with a drill. If the wood used to make the crib is soft, the hole will easily break through.

So that the fasteners are not visible, they are drilled from below, pointing the drill upward

The configuration of the crib suggests that the storage boxes are not attached to the bed frame, but have the form of roll-out cabinets. Drawers should be equipped with wheels so that the storage container can be rolled out.

Stylish wooden crib for a baby

If the apartment owner decides to change the configuration of the crib so that the drawers can be pulled out, then a transverse rail is attached to the bottom of the workpiece, and the product itself will stand on the side slats. In this case, the sidewalls are made higher than previously planned by several centimeters, equal to the height of the drawers. The drawer itself is placed on guides.

Wooden crib for a bright and airy room

For the boxes, we take plywood with a thickness of 1.2 cm, cut out the bottom and walls of the box, and tighten it together with self-tapping screws. Additionally, the box is glued, because the things in the box carry a load on the structure. We attach the wheels to the bottom of the assembled box.

Bright spacious room with a cot

The legs on the bed, if you decide to make them yourself, are made from the remains of furniture panels or from scraps of square-shaped timber. Attach the legs to the furniture frame with self-tapping screws.

For the boxes, we take plywood with a thickness of 1.2 cm, cut out the bottom and walls of the box, and tighten it together with self-tapping screws.

Decorating the bed

When the work is completed, it is recommended to give the product a finished look. It is recommended to cover it with upholstery fabric for furniture. First, parts 2–3 centimeters larger than the main parts are cut out of the fabric and overlocked so that they do not fray. The fabric is fastened with a furniture stapler, and its sections are hidden inside the crib so as not to spoil the aesthetic appearance of the structure. During decoration, the fabric is stretched to prevent creases, folds and bubbles from appearing.

A crib for the smallest family member and a small bedroom

Another finishing option would be to varnish the crib frame, headboard, and backrest at the feet. To do this, it is recommended to use quick-drying water-based varnishes. Treatment with stain will be more environmentally friendly for furniture in a children's room. It is recommended to first sand and polish all parts using a drill with an attachment.