Installation verso. Ventilation devices VERSO. Energy efficient EC drive

The Verso-S-2100-F-HW unit is a monoblock structure with a fan, heater and filter inside. Air handling units are ideal for apartments in private houses and offices.

Verso-S-2100-F-HW units differ not only optimal parameters work, but also compact dimensions. The design features of the air supply units allow you to place the equipment under suspended ceiling or on the balcony of an apartment, their size does not exceed the size of a standard doorway.

All standard settings Verso series are based on the “Plug and Play” principle: each unit has integrated automatic control and is supplied fully equipped. Verso units can be quickly delivered to the customer in the shortest possible time since they are always available in stock.

Verso units have ample opportunities, the customer can choose the desired setting using software. For customer convenience, air heaters, air coolers and dampers are installed on outside installations - how separate sections, therefore, the assembly of the device is greatly simplified, and savings are made at the installation site of the device. effective area. Verso ventilation units can be installed both indoors and outdoors. The units are manufactured with fully built-in automatic control. The productivity of the installations ranges from 1000 m³/h to 34,000 m³/h.

Design Feature

Fan EC/AC:

• EC motor efficiency is 92%;
• energy consumption of EC engines is 30% less than that of AC engines; silent operation;
• smooth control function;
• safety class – IP55 ( partial protection from dust, protection from jets of water);
• the dimensions and weight of EC engines are smaller than those of AC engines;
• The EC fan is directly connected to the electric motor, which ensures long service life;
• there is no need to control tension and periodically replace belts;
• uniform flow in the air duct behind the fan allows reducing pressure losses in the network; possibility of connecting a device for measuring air flow; working temperature fan - up to 40°C.

Heat exchange devices:

• Komfovent Verso S air handling units are equipped with an electric (HE type) or water (HW type) heater, which allows heating the supply air to a comfortable temperature;
• for cooling the supplied air flow a CW cooler is used (works on water or a water-glycol mixture) or CDX (works on the principle of direct cooling).

Original body design:

• compact sections have no protruding elements, which ensures ease of transportation, assembly and maintenance;
• the walls of the housing have excellent heat and sound insulation, as well as high degree fire resistance;
• easy accessibility of all components (filter, fan, heater, cooler, etc.) simplifies maintenance during operation;
• The housing is highly airtight thanks to an elastic seal made of durable porous rubber, which has a special profile with an air cavity.

Control system

System intelligent control provides safe work installations, manages the specified parameters ventilation system, optimizes operating costs. Two control panels that allow users to simply enjoy fresh air, a feeling of comfort and well-being.

Air handling unit control using C5 automation

• Weekly programming option.
• Control based on Android and iOS.
• Compatible with control system"Smart House".
• Remote control via web interface.
• Regulation of functioning in 5 modes. 3-mode flow control.
• Intelligent self-diagnosis option.
• Control of humidity, temperature and air quality.
• Indication of energy parameters, air flow, cleanliness air filters.
• Protection of the heat exchanger of the Komfoveyn Verso P air handling unit from malfunctions.
• Inverter control of the outdoor unit.
• Ability to control circulation pumps.
• Warm-up option circulation pumps and mixing valves.
• Connection protocols: Modbus TCP (via the Internet), BACnet/IP (via the Internet), Modbus RTU (via RS-485).

The VERSO series is divided into two groups: VERSO Standard, which is a standard series of installations, and VERSO Pro, which is designed for special projects. Both groups of units can be offered with a rotary heat exchanger, a heat pump and a rotary heat exchanger, a plate heat exchanger or simply air handling units.

Installation Komfovent Verso R 2500-H-E differs not only in optimal operating parameters, but also in compact dimensions: design features in the VERSO Standard and VERSO Pro installations make it possible to limit the dimensions of one of the sides of the section to 900 mm, which makes it possible not to exceed the dimensions of a standard doorway.

All Verso Standard units are based on the PLUG AND USE principle: each unit has fully integrated control automation. Verso Standard units can be shipped to the customer in a fraction of the cost. short term, as they are available in stock. Ventilation units have a capacity from 1000 to 8000 m³/h.

Verso Pro installations have a wide range of capabilities, the client can select the desired installation using the software. For the convenience of customers, air heaters, air coolers and dampers are installed on the outside of the unit - as separate sections, so the assembly of the device is greatly simplified, and useful space is saved at the installation site. VERSO ventilation units can be installed both indoors and outdoors. The units are manufactured with fully built-in automatic control. The productivity of the installations ranges from 1000 m³/h to 34,000 m³/h.

Advantages of Verso R units:

• Saving thermal energy
  During the ventilation process, heat from the exhaust air is transferred to the air flow entering the room.
• Efficient heat exchanger
  Under normal conditions, the rotary heat exchanger does not freeze: additional heating supply air not needed even if the outside temperature drops below zero. Using a rotary heat exchanger, energy consumption for heating air is reduced by approximately 4 times.
• Air humidity balance
  Under normal conditions, condensation does not form in rotary heat exchangers, since excess moisture is removed and some of the moisture is returned back to the room. The air in the room is dehumidified less, so the humidity balance is maintained. Condensation does not fall out, drainage is not needed, all this simplifies installation of the unit.
• Low noise level
  Verso R ventilation units are equipped with low-noise fans housed in a sound-insulating housing. This ensures a low overall noise level.

Advantages of a rotary heat exchanger

• High efficiency
• Doesn't freeze
• Four times less energy for air heating
• Regenerates moisture – reduces humidification costs
• No drainage required - simplifies installation
• Compact
• When the air conditioning is turned on, it returns cold from the exhaust air - reduces air conditioning costs

Temperature efficiency on demand:
Two levels of rotor efficiency are possible. Optimal efficiency is achieved with an L-type rotor, more high efficiency Available with XL rotor.

Ventilation units are manufactured with three types of rotary heat exchangers:

• Heat exchanger made of aluminum foil (AL). It regenerates moisture in winter period;
• Heat exchanger made of hygroscopic and aluminum foil (AZM). It regenerates moisture more efficiently than the AL type heat exchanger;
• Heat exchanger made of hygroscopic aluminum foil (AZ). This type of heat exchanger effectively controls humidity in both winter and summer.

Energy efficient EC motors
All rotary heat exchangers are equipped with EC motors, which save energy and ensure smooth rotation and control of the rotor.

Heater
For additional protection systems, in conditions where the outside air temperature can be below -30 °C, it is recommended to install a ducted air pre-heater.

Advantages of Verso R units

Saving thermal energy

During the ventilation process, heat from the exhaust air is transferred to the air flow entering the room.

Efficient heat exchanger

Under normal conditions, the rotary heat exchanger does not freeze: additional heating of the supply air is not needed even if the outside temperature drops below zero. Using a rotary heat exchanger, energy consumption for air heating is reduced by approximately 4 times.

Air humidity balance

Under normal conditions, condensation does not form in rotary heat exchangers, since excess moisture is removed and some of the moisture is returned back to the room. The air in the room is dehumidified less, so the humidity balance is maintained. Condensation does not fall out, drainage is not needed, all this simplifies installation of the unit.

Low noise level

Verso R ventilation units are equipped with low-noise fans housed in a sound-insulating housing. This ensures a low overall noise level.

Rotary heat exchanger

Advantages of a rotary heat exchanger

• High efficiency
• Doesn't freeze.
• Four times less energy to heat the air.
• Regenerates moisture - reduces the cost of humidification.
• No drainage required - simplifies installation.
• Compact.
• When the air conditioning is turned on, it returns cold from the exhaust air into the room - reducing air conditioning costs.

Temperature efficiency on demand: two levels of rotor efficiency are possible. Optimal efficiency is achieved with the L type rotor, higher efficiency can be achieved with the XL type rotor.

Ventilation units are manufactured with three types of rotary heat exchangers:

• The heat exchanger is made of aluminum foil (AL). It returns moisture.
• The heat exchanger is made of hygroscopic and aluminum foil (AZm). It returns moisture more efficiently than the AL type heat exchanger.
• The heat exchanger is made of hygroscopic aluminum foil (AZ). This type of heat exchanger returns moisture most efficiently.

Energy efficient EC drive

All rotary heat exchangers are equipped with an EC drive, which saves energy and ensures smooth rotation and control of the rotor.

For additional system protection, in conditions where the outside air temperature may be below -30oC, it is recommended to install a ducted air pre-heater.

Automatic control

Automation functions C5:

• 5 different modes slaves: Comfort1, Comfort2, Economy1, Economy2 and Special
• Temperature control: supply air, exhaust air, indoor, balance
• The user is provided with not only the main, but also the energy parameters of the device: efficiency of the heat exchanger, return energy of the heat exchanger, heater energy consumption counter, fan operating time counter
• Air quality control, maintaining minimum temperature
• Flow control modes: CAV, VAV, DCV
• Weekly installation program
• Air flow display (m³/h, m³/s, l/s)
• Protection of a rotary or plate heat exchanger from malfunction
• Rotor cleaning function
• Intelligent self-diagnosis
• Night cooling in summer
• Air Quality Monitoring
• Supply air temperature regulation
• Maintaining minimum supply air temperature
• Combined control of water heater and cooler
• Inverter type outdoor unit control
• Cooling recovery function
• Compensation external ventilation
• Humidity control: air humidification and dehumidification
• Control of circulation pumps on demand
• Warm-up function for circulation pumps and mixing valves
• Indication of clogged air filters
• Operating mode and energy meters
• Remote control via web interface
• Built-in data logger for all air handling parameters
• Application software for smartphones based on Android and iOS

Rotary heat exchanger. Efficient EC motor. Low operating noise and high performance.

Excellent heart for ventilation system country house or a multi-room apartment.

Description Verso R 1000 H/V E

The efficiency of a rotary heat exchanger (recuperator) can be described simple example: reduction in costs for heating the supplied air is reduced by 4 times! So calculate the savings per year of operation of the ventilation system in our latitudes. Definitely a recuperator!

One of the advantages of a rotary heat exchanger is... humidification! Yes Yes. The remaining moisture in the channels on the aluminum fins is transferred to the supplied air, which now receives not only heat from the exhaust air. And this is a significant factor when operating in the cold season, when indoor humidity already drops to a critical 35-40%.

Advantages of the rotary heat exchanger Verso R 1000 H/V E:

• high efficiency at 80-90%!
• no freezing even in frosty conditions - year-round operation
• moisture regeneration (indirect humidification, moisture return)
• no need to create drainage system, which slightly simplifies the choice of location and installation of the ventilation unit itself
• when the air conditioning system is running, it will cool the supplied air

When completing a ventilation unit, it is possible to select both the type of rotary heat exchanger and the material from which it will be made:

• Optimal thermal efficiency when installing an L-type rotor and increased heat transfer efficiency when installing an XL-type rotor
• the material also affects the transfer of moisture: only aluminum (AL) moisture regeneration in winter; absorbent and aluminum foil (AZM) are more effective; Hygroscopic aluminum foil (AZ) effectively controls humidity in both winter and summer

Design and installation of heating, ventilation and air conditioning systems is our specialty. We know Komfovent equipment firsthand. And we work with it very closely: more than a dozen (if not already hundreds) of objects have been completed using these air handling units. No worse than Salda, Systemair and other European brands.

Finally, in Russia they learned how to do ventilation units and automation for them. This equipment is a pleasure to work with. And there have been no cases under warranty yet. So far the clients are all happy. This is important for us: bought and sold is not ours. We design, install and maintain functionality.