If you are using a cleaning system atoll, replacing cartridges must be done every six months. Are you confident in own strength? Can you do all the work yourself? Then listen to our recommendations!

Instructions for replacing cartridges.

The cleaning system works at full capacity only when it is handled correctly and the filter elements are changed in a timely manner. Otherwise, there can be no talk of any clean and healthy water. And remember that only original cartridges remove all dangerous impurities from water.

If you have already purchased Atoll filters, cartridge replacement is carried out according to the following scheme:

• We turn off the tap of the general water supply to the apartment, as well as on the system itself and the storage tank.
• Open the drinking tap so that all the liquid remaining in the system comes out.
• We take the filter out of the cabinet, and then special key spin the flasks.
• We take out the old cartridges and rinse all the containers thoroughly, then wipe them dry.
• We install new filters and tighten the flasks.
• We put the system in place and turn on the water to check for leaks.

Experts recommend opening the tap for 5 minutes after replacing the cartridges. drinking water. The liquid will completely fill all the flasks, and the filter elements can begin their work - high-quality cleaning water from all contaminants hazardous to health.

How often do you need to change cartridges?

If your house is atollfilter, replacement consumables must be timely. The manufacturer says that each cartridge has maximum term operation:

• prefilter – 3 months;
• filter elements containing granular Activated carbon- 6 months;
• membrane cartridge – 2 years;
• post-filter – 12 months.

But not always Consumables last so long. After all, everything depends on the quality of the water itself that enters the filter system.

Replacing Atoll cartridges- a problem that can be solved independently. But if you do not have experience working with such devices, then it is better to entrust this matter to a professional from service department. After all, if you make the slightest mistake, you can ruin not only the filter elements, but also the cleaning system itself.

The replacement element of the filtration system is of great importance, because the final result of cleaning is also affected by its degree. Therefore, it is so important to pay attention to the quality of the filter, which is only possible in the manufacture of this element world leaders in production. Yes, for systems reverse osmosis Atoll filter systems cartridges are produced by well-known US companies: Atoll (USA, Russia), Filmtec, Omnipure, Pentek. You can purchase or order cartridges for Atoll reverse osmosis systems either as a set with the system itself, or individually, when the purchase is caused by the need to change the cartridge.

It is recommended to select a replacement element for the Atoll filter based on the current characteristics of the water, its chemical composition, level of cruelty, pollution, etc. Depending on these parameters, the following main types of cartridges are distinguished:

• Pre-filters– designed for preliminary removal of large and heavy pollution(impurities, chlorine), as well as membrane protection. Pre-filters can be either a full-fledged link in the reverse osmosis system or one of the purification stages, of which there are three in some filter models. Without this filter, the membrane in short term fails.
• Reverse osmosis membranes – essential element reverse osmosis, it is responsible for the complete purification of water in the system, eliminates even the smallest contaminants, and acts at the molecular level.
• Postfilters– an element of final purification, bringing water to an almost sterile state. Final cleaning cartridges are installed at the outlet storage tank, which avoids the entry of unwanted substances from the storage area of ​​purified water. It is not uncommon for a mineralizer to act as a post-filter.

How often should Atoll cartridges be replaced?

The service life of the filter elements is set by the manufacturer and is indicated in the device passport. The service life of replacement cartridges largely depends on the characteristics of the supplied tap water, as well as the total volume of its consumption. And although the filter elements have a resource reserve (it is up to 50%), it is recommended to replace them based on the standard resource indicator. These indicators are given below:

• Pre-filters must be replaced every six months;
• It is enough to change the membranes once every two years;
• Post-filters – once every 6 months. - 1 year.

Detailed information about each replacement part and each cleaning system water is located in the product description.

Beware of fakes. Atoll cartridges are certified

All cartridges offered for sale are certified in the USA and meet sanitary standards National Sanitation Foundation (NSF). Such a certificate guarantees that the materials for the manufacture of cartridges are extremely safe, and water purification in reverse osmosis systems complies international standards, that is, it is produced with high quality, the possibility of residual impurities is excluded.

In turn, we recommend paying attention to sets of cartridges, which, thanks to unique numbers (101-106), differ for models of reverse osmosis systems. Such a purchase is intended to relieve filter owners from unnecessary hassle on the selection of the missing filter element and guarantees branded quality of water purification. The kit includes instructions for self-replacement cartridges in Atoll filters and compatibility tables of filtration elements with models of cleaning systems.

Attention! Uncertified components for Atoll products from little-known and even dubious manufacturers may have characteristics that do not coincide with those specified in the product documents. In addition, such filters cannot guarantee consumer safety and can also be very dangerous.

If you need replacement of Atoll filters, contact Yudu. On the Yudu website you will find specialists in Moscow who can change cartridges according to affordable prices.

Yudu specialists install replaceable filter parts on various models. For example, a technician can quickly change the cartridges in the Atoll A-550 filter. The service life of Atoll filters largely depends on:

• moisture hardness
• total consumption
• crane operation

If the taps in your house or apartment operate almost uninterruptedly, changing the filter elements will be required much more often than indicated in the recommendations. Performer Yudu will tell you about these and other nuances during your arrival.

Despite the fact that the replacement elements of the A-550 have a reserve life, filter replacement should be carried out based on standard indicators. Our specialists comply with everything technical standards and safety rules. Therefore, all work will be performed to the highest possible quality.

When collaborating with qualified specialists, you can be sure that original filters from the Atoll manufacturer will be installed in your home or apartment.

The experts who replace the Atoll filter will install for you those replacement elements that:

• will meet all sanitary standards
• have the appropriate certificates
• made from quality materials

Upon completion of installation, drinking water filtration will be carried out with the highest quality possible. Professional Yuda performers will always correctly select the most suitable model for your cleaning system.

Selecting parts by numbers

Before starting work, experts will advise you to stop at optimal options– new sets of filter elements that have unique numbers from 101 to the option with the number 5. You can entrust the purchase of them at an affordable cost to the contractor Yuda.

By choosing the most suitable replacement elements from this series, you can be confident in the quality of water purification. Models from the 101-106 series (from 1 to 5) will save you from the need for additional selection of missing filter elements.

Experts select Atoll filters free of charge. You pay only their direct cost. Yudu performers will be able to choose for you an option that suits the price and your needs. technical specifications. You should not contact various companies offering a similar service. They often conduct intermediary activities, so the cost of replacing mechanical filters will be inflated.

The service provided by qualified Yudu craftsmen will be provided at affordable prices. You will be able to agree with the contractor on all the nuances of the upcoming work.

Before changing the cartridges in the Atoll filter, the Yudu performer will make sure that all necessary tools for the cleaning. Clean water you will be able to receive if the system operates uninterruptedly and all components are available, including:

• drain clamp
• key for scrolling prefilters
• storage tank
• FUM tape

For installation household appliances Yudu specialists use a special drill and keys. After selecting a new model and replacing mechanical filters, further operation is possible.

To obtain clean moisture and uninterrupted operation of the new filter element, the pressure should be no more than 2.5 atmospheres. The contractor you choose will check this value and comply with all necessary standards when working with a system of flow-through drinking filter elements. The replacement of Atoll filters, carried out by our performers, will be as prompt and high-quality as possible.

Benefits of cooperation

On the Yudu website you will always find professional performers who install household appliances. You should not contact different companies, because... they provide for an additional payment for the service provided. Yudu performers cooperate directly. With their help, Atoll filters can be replaced in any area of ​​Moscow.

You can discuss all the details of the work personally with a specialist. Replacement of Atoll filters will be carried out in the shortest possible time in compliance with all requirements for its uninterrupted operation.

Tsugunov Anton Valerievich

Reading time: 5 minutes

In terms of the degree of water purification, a system using the principle of reverse osmosis is considered the best. Despite its considerable cost, it can often be found in modern apartments. Like other filtering devices, it requires periodic replacement of the cleaning elements. Many owners call a specialist, not suspecting that replacing the cartridges in a reverse osmosis filter can be done independently, without high costs time and effort.

What will be required for replacement?

List necessary equipment small:

• A set of new cartridges suitable for the cleaning system model installed in the apartment.
• Plastic keys for unscrewing filter flasks, included with the device. You can do without them, but then you need to do the replacement together.
• A basin and a rag - to prevent the formation of puddles and leaks due to water spilled from the system.
• Silicone grease – for processing seals.

The new filter set must be installed in the same way as the old one. In order not to confuse anything, it is better to first record it on camera mobile phone position of each part before removing it. This will greatly simplify replacing replacement cartridges: you won’t have to painfully remember how this or that part was installed.

Disassembling and cleaning the device

The procedure is as follows:

• A tap is usually installed where the filter connects to the water supply. It must be shut off to stop the supply of water to the device. If there is no valve, you will have to completely shut off the flow cold water to the apartment.
• To ensure that the pressure in the system does not interfere with unscrewing the filter cassettes, water is drained from it: open the tap and leave it in this position. The liquid may disappear completely in about five minutes.
• To prevent leakage, place a basin under the filter; if it is too large, place it under a spinning flask. In extreme cases, a rag will also work, with which you will need to quickly collect the water that has spilled out of the flask.

Frequency of filter replacement for different models of cleaning systems

Each manufacturer indicates the service life of the elements of its filtration system. In case this data is lost, here are recommendations for the most common models.

HELPFUL INFORMATION: Connecting a water filter to the water supply: installation procedure

For the Aquaphor OSMO-50 reverse osmosis system, the EFG63-250-20C and EFG63-250-5C modules will require replacement after 3 months, B510-03 - after 6 months. Carbon filter will last a year, membrane replacement is expected after 1.5–2 years.

In the Barrier K Osmos filter, the cartridges are changed every six months, the membrane is designed for 3-4 years of operation. The same terms for replacing working elements are provided for the Geyser Prestige 2 reverse osmosis system.

The manufacturers of the Atoll A-450m STD Compact series have created a detailed algorithm for changing filters:

Replacing cartridges in Atoll drinking filters.

The cost of replacing cartridges in a reverse osmosis filter. Atoll filter repair.

Selection of cartridges needed to replace a drinking filter in the kitchen.

If you have Atoll A-445, A-450/A-460

• Since installation 6 months have passed. You need to replace the cartridges in the two lower flasks (prefilters) and the post-carbon cartridge on the top. Cost of cartridges 1300 rubles
• If since installation 2 years have passed. It's time to replace all four filters (including the membrane). The cost of cartridges will be 3550 rubles. DISCOUNT on the complete set -10% (RUB 3,200)

If you have Atoll A-550/A-560

• Since installation 6 months have passed. It is necessary to replace the filters in the three lower flasks (prefilters) and the post-charcoal cartridge on the top. The cost of replacement elements will be 1400 rubles.
• If it's passed two years. It's time to replace all filter elements. The cost of the kit will be 3650 rubles.

DISCOUNT on the full set -10%(3300 rub.)

Works on replacing cartridges Atoll in reverse osmosis filters (Atoll A-450, Atoll A-560) in any modifications 1100 rubles ( within the Moscow Ring Road ) We use only original Atoll cartridges

Work on fault diagnosis and repair in Atoll filters of any modifications 1100 rubles plus the cost of replaced parts.

Works on installing a drinking filter in the kitchen under the sink, including installing a standard drinking faucet on the sink or countertop 1500 rubles

We repair and replace cartridges in similar filters with flasks of the SL-10 standard (Geyser, Barrier, etc.)

Flow-through filters (which do not have a storage tank) have cartridges installed that are functionally different from those in osmotic systems. The cost of cartridges will depend on the filter model. Work to replace 1100 rubles in the aisles of the Moscow Ring Road.

The most expensive element in the kit when replacing filters in a reverse osmosis installation is the membrane. The manufacturer recommends changing the membrane once every two years. You can evaluate the performance of the membrane with a device, a TDS meter. If the mineralization of the outlet water is more than 10-15% of the mineralization of the source water, the membrane requires replacement. Recently, filters began to be equipped with faucets with a built-in light indicator. If the control light turns red, it’s time to replace the filter elements.

When replacing complete set discount on cartridges -10%

When replacing a complete set, a 10% discount on cartridges

If you have a filter installed Atoll in a single building(Atoll A-575CMB, A-550 sailboat, Atoll A-575 box MAX) the cost of filters (prefilters + postfilter) will be 1900 rubles. Recommended replacement period is 6 months. According to the instructions, the membrane should be replaced once every two years. The cost of the TW30 1812-75 membrane is 2650 rubles. Used in installations that have the number 75 in the name (for example A 575). The cost of the TW30 1812-50 membrane is 2250 rubles. Used in filters whose names include the number 50 (for example A-550).