Install aluminum blinds. Installing blinds on a plastic window - do-it-yourself installation features. Technology for installing horizontal blinds

When there is a lot of light entering the room, it is great, but sometimes there is too much light, it interferes with work or relaxation. Mounting blinds, which can be vertical, horizontal, or roller, will help correct the situation. You can install them yourself or seek the help of professionals.

Installation of products is carried out to the wall, ceiling or directly into the opening. When purchasing blinds, you need to remember some rules.

1. First of all, you need to determine the exact parameters of the window - width and height.
2. Decide where the control system will be located.
3. To figure out optimal type fastenings for blinds.

Vertical models are usually mounted above the window opening and can serve as curtains. Horizontal and roll have more possibilities– they are mounted on the upper slope, on the window, on each sash separately. At the same time, they combine perfectly with any curtains and leave the window sill free. Everyone must determine the product and installation options that are suitable for themselves.

It is best to order blinds from the same company that manufactured the windows.

The standard product set usually includes detailed instructions, telling you how to install it yourself.

Installation methods

Attaching blinds to plastic windows directly depends on the design and functional purpose. Horizontal or rolled products that cover only the glass are attached directly to the frame. In this case, they can function simultaneously or independently of each other. For installation vertical blinds a bracket must be attached to the ceiling.

The opening flap does not require drilling, since the brackets can be installed using special clamps or double-sided tape. The most reliable and durable installation method is screws, which are screwed in using a screwdriver. It is imperative to take into account that the walls in many rooms are uneven, so determining how to install fasteners for blinds is one of the main factors in the successful completion of the process.

For quality installation you need brackets or brackets, which are usually included in the kit, as well as tools: a Phillips screwdriver, hammer, drill or hammer drill, plumb line, drills, tape measure.
Installation of blinds on brackets is carried out according to a certain algorithm.

• Make markings at the intended installation location.
• Hang the blind mount in a certain place: to the ceiling, sash, wall.
• Turn the mechanism latches all the way counterclockwise, insert the curtain rod, and return the latches to their original position.

Installation of blinds on non-standard openings using drilling occurs differently.

• Brackets are installed at the top of the frame, and plastic corners are installed at the bottom.
• It is necessary to secure the cables in special bushings of the upper cornice.
• Secure the cornice to the brackets.
• Pass the cable through the holes in the slats.
• Another pair of bushings must be inserted into the holes in the lower brackets, thread the cable through them and secure.
• Attach the handle to the structure.
• Check system functionality.

Installation of fastenings for blinds on sloping windows using screws is carried out in a similar way using drilling.

How to determine the size of blinds?

When installing blinds on large openings, it is imperative to use intermediate elements, which will significantly increase the reliability of the structure. One bracket must be placed next to the control mechanism, since this area is most subject to load. However, it must be taken into account that it should not interfere with the normal functioning of the system.

The width of the blinds installed on the shutters and opening with them must correspond to the parameters of the window plus three centimeters - one and a half on each side. Installation inside the opening involves a canvas four centimeters smaller than the width of the window - two centimeters on each side. For free functioning, a gap is required between the canvas and the upper edge of the opening.

Installation outside the window opening requires the use of a canvas that is ten centimeters larger than the width of the window - five on each side. The length is not less than the height of the window plus ten centimeters. If the window handle protrudes, the blinds are mounted on brackets. In this case, the canvas should be 20 centimeters larger than the width of the opening, which will darken the room more effectively.

Before installing fastenings for blinds, it is necessary to check whether the selected design will not interfere with the normal functioning of the shutters.

Vertical models are mainly attached to the ceiling. They consist of a cornice with a control mechanism and slats made of different materials: plastic, fabric, wood. After installing the cornice, it is necessary to attach the slats, and you must ensure that the seams on the plates are on the inside when the blinds are closed. After installing all the strips, it is necessary to attach the cord that activates the control mechanism, and to prevent it from getting tangled, a special plumb line included in the kit is put on it - it can be of any shape.

The lamellas are easy to cut, so in case of errors in the calculation, the position can be easily corrected using simple tools. Modern manufacturers are doing everything possible to reduce the labor intensity of the process as much as possible. The main thing is to hang the stripes correctly, since all windows have different parameters.

Design diagram horizontal blinds in section

How to choose?

Due to the simplicity of the design, blinds can be manufactured very quickly, and a variety of mounting methods - with or without drilling - allows them to be installed on windows with both rotary and tilting modes of operation. Now it is not at all necessary to drill the frame, and in case of dismantling there will be no unattractive holes left.
Modern manufacturers offer completely new installation methods:

1. holding magnets that allow the leaf to be positioned parallel to the sash;
2. double sided tape;
3. brackets or clamps that are attached to the sash.

Before installing the blinds, it is necessary to check the tightness of the window and make sure that there are no drafts that will rock the structure and interfere with its operation.

The installation method depends on the design and size of the product. When choosing a model, you must take into account functional purpose premises. During work, you must exercise maximum precision and care, and also determine for yourself the most suitable product, the method of its installation and operation. It is important to remember that all blinds have strict geometric shapes, so even a slight distortion during installation will spoil appearance and will complicate the operation of the control mechanism.

Today, blinds are one of the most effective decorative elements. internal space premises. They gracefully regulate the flow of sunlight, and ease of operation, affordable cost, variety of models and materials used for production have allowed them to remain relevant for decades.

Another factor influencing popularity is easy care, which consists of periodically wiping the slats with a sponge soaked in a soap solution. Once a year, the strips should be removed, each one rolled up and placed in water with detergent– the dirt will come off without any additional action. After rinsing, they are hung wet in a place where they will straighten out on their own. Selected species Blinds can only be dry cleaned with a vacuum cleaner.

A huge range of products of various configurations and sizes allows you to choose suitable option in every specific case. You can install the products yourself, however, there are restrictions on warranty service. More reliable option– turn to specialists, this will avoid many difficulties.

You can install vertical blinds yourself if you follow step by step instructions installations. It is also important to know how to care for blinds and what types are intended for which windows.

Kinds

Vertical blinds are divided into the following types: classic, inclined, corrugated, arched, day-night and accordion. When installing vertical curtains, it is important to know which type is suitable for which window and interior:

• Classic. Made from fabric, paper or plastic. Designed to darken the room, protect against heating by the sun's rays, and zoning the interior space of the room.

• Oblique. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is a specific assembly system, which does not allow the canvas made of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

• Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. A corrugated model made of plastic and paper in this design absorbs a significant part of the heat and protects the room from bright light.

• Arched. Maximum flexibility fabric sheets, which take any shape, like a paper fan. Good decision for rooms with non-standard form windows (arches, trapezoids, triangles, beveled windows).

• "Day Night". The canvas of such blinds consists of two layers of fabric: light, permeable a large number of light fabric for daytime use and dense, dark fabric for protection from bright sun during the day and prying eyes in the evening.

• Harmonic. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.

Peculiarities

This product has a number of distinctive features:

• They can be closed from top to bottom (classic canvases), from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted: by closing either the upper, lower, or central part of the window.
• Suitable for covering irregularly shaped windows.
• Optimal solution for attic, attic, ceiling and inclined windows.
• When opened, the canvas is compactly folded and hidden inside the cornice.
• Convenient for installation on all types of windows.
• Various mounting methods and control mechanisms (manual and electric).
• The woven fabric is washable.
• The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
• Easy installation can be done by yourself.

Advantages

The following are distinguished:

• Compactness. Blinds take up minimal space, allowing owners to show their imagination and organize additional decor windows or leave the window sill as a functional surface.
• Simple and clear type of control.
• Long term services. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
• Ease hygiene procedures. They do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months.
• A variety of designs for interiors in any style.
• The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
• Possibility to install the system yourself.
• A variety of materials: from light window decoration to total blackout protection.
• Possibility to combine blinds with curtains, tulle, lambrequin.

Required Tools

To install vertical curtains, you don't need many tools. You will need: a stepladder, a set of screws from the kit, building level and drawing supplies, drill, screwdriver.

The following will definitely come in handy: a bracket for the ceiling and for the groover, fasteners, corners, clamps, monofilament, stoppers and c-clips, rings for the rod, chain locks, replacement parts. Each instruction contains a detailed list of necessary components.

How to take a measurement

The final result depends on how correctly the measurements are taken. Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats are constantly rubbing against the wall.

It is important to pay attention to the following points:

• For the most accurate indicators, a steel tape measure is used.
• The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter.
• When ordering blinds, the width parameter is indicated first, length – second.
• Not a single window opening is absolutely perfect. geometric shapes, therefore measurements in height and width must be made at least at two points.

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, you should compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value. For wall mounting, you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation implies determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Mounting options for plastic windows

There are several mounting options: with and without screws.

With self-tapping screws:

1. It is necessary to mark the places where they will be located.
2. Then make holes and attach the brackets.
3. Secure the blinds.
4. Also make two holes on the bottom.
5. Secure the ends of the blinds with plugs.

Without self-tapping screws. First of all, you need to mount the curtain, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening. The second step is to attach the brackets with adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for the screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to care

Due to the peculiarities of their composition, the materials from which blinds are made do not require special care. Once a month, such curtains can be dry cleaned, and once every few months - wet cleaned. A good addition would be treatment with sprays against fading, exposure to moisture and dust.

If necessary, you can wash such blinds using a gentle wash cycle or by hand.

How to properly attach to the ceiling

Vertical curtains are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with decorative facade or without it. The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape. Special tape seems rather impractical, however, it is fixed very firmly, so it is important to correctly mark for installing the brackets. Once they are glued, moving them will be quite difficult.

The procedure for installing vertical blinds:

• Preparing tools.
• Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
• Attaching the brackets in a suitable way(with or without drilling).
• Installation of cornice.
• Installation of slats. To do this, you need to pull the control cord, with the fastenings for the slats located on it, so that they are in the desired position.
• Then fix all the slats on the hooks of the fasteners.

Wall mounting

Installation work Wall decoration requires certain skills and experience; it is necessary to take into account some nuances and features. Installation of blinds begins long before preparation work surface and a set of tools:

• The first step of this process is an informed decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room.
• Second important point- this is the correct marking. Much, if not everything, depends on it, including how easy the installation process will be. If all the features of the architecture window openings will be taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without any help professional installers.
• It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of deformation for them.
• Installation of blinds. Must be carried out exactly with markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening with drilling and fastening without it.

How to hang on the balcony

To install, you must follow these steps:

1. Degrease the areas of the balcony and fasteners that will be connected with adhesive tape.
2. Install blinds.
3. Assemble the brackets.
4. Mark the mounting brackets. To do this, you need to attach the brackets to the assembled blinds, install them on the window without fastening, mark with a pencil the places for the adhesive tape, and remove the curtains.
5. Install the string guide against sagging. Attach to the “ear” of the top bracket and weighting of the curtain, and fix at the bottom in the tensioner, which is installed on the frame.

Installing ready-made blinds on windows does not require any special skills. Moreover, for this, in general, simple work, sometimes you have to pay quite a lot of money to professional installers.

Therefore, it would be most advisable to mount the blinds to the ceiling with your own hands. To do this, you can make do with improvised tools that are available in the arsenal of any home craftsman.

Aesthetics and practicality

Just recently, blinds were perceived as nothing more than some kind of foreign exotica. But quickly enough our fellow citizens, accustomed to traditional curtains and curtains, were able to appreciate the practicality of use and the aesthetic beauty of these structures.

From then on, the “triumphant march” of these light-protective devices, invented back in the 18th century in the USA, began through apartments and offices in our country. Today, we no longer perceive them as something unusual - more and more owners of residential and office premises give preference to these easy-to-use lattice structures.

The only negative that can be pointed out is that it is more high price blinds compared to classic curtains from fabric. However, the overall cost of the structure can be reduced if you install it on the windows yourself.

Design features of blinds

Vertical blinds

Today there are several types of blinds on our market, differing from each other in the features of their design. Depending on their type, the methods of attaching blinds also differ:

1. Horizontal blinds. The slats (or so-called “slats”) in this design are located one above the other. The access of light into the room here is regulated by rotating the lamellas around their axis, as a result of which they either press tightly against each other or form a gap. As a rule, such structures need to be installed directly on window frames.
2. Vertical blinds. They differ from the first option in the arrangement of lamellas hanging from top to bottom. In this case, adjusting the access of light can be done either by turning the slats or by moving them to the side, as with conventional fabric curtains. In this case, the fasteners for the blinds are located directly above the window - on the wall above window opening or on the ceiling.
3. "Roman curtain". Is one of the varieties horizontal devices. Only the access of light here is regulated not by turning the slats, but by lifting the entire structure: the curtain goes up, rolling up into a roll. Fasteners for blinds of this type are also located either on the wall, above the window, or on the ceiling.

The materials from which devices can be made are very different - aluminum, wood, fabric. But this in no way affects the installation features of the blind mounts. As a result, we have two main types of fastening:

• directly to window frame(for horizontal type devices);
• on the wall or ceiling (mounts for vertical blinds).

If some damage is caused to the blinds during the work, it will no longer be possible to exchange them for others. Warranty for damage caused by self-installation, does not apply.

Installing blinds on a wall or ceiling

Blinds mounting diagram

The main device with which vertical blinds are attached is the cornice. It contains rotary and sliding mechanisms, the slats hanging down are attached to it.

Preparatory work

For fastening the cornice vertical device to the wall or ceiling, you will need the following tools:

• impact drill or hammer drill;
• screwdriver;
• roulette;
• building level;
• pencil.

Before you begin installing the cornice, you should take all the necessary measurements. The height of the cornice must be installed in such a way that the slats hang at least 5 - 10 cm below the window or window sill.

At the required height on the wall, mark a point and, using a pencil level, draw a strip along which the cornice will be attached. On this line, mark a point that exactly coincides with the middle of the window.

Installation of cornice

Next we will need to determine the points for installation fastening elements– dowel-nails. To do this, we attach the cornice from the blinds kit to the line so that its center corresponds to the mark of the center of the window.

If the part already has holes for fastening elements, then we place points in these places on the wall or ceiling, depending on where you intend to attach the cornice. If ready-made technical holes are not provided, then you will have to make them yourself using a drill, stepping back a few centimeters from the edge of the cornice.

Then, using a hammer drill or impact drill We drill the wall (ceiling) and hammer a plastic dowel into the hole.

We put the cornice back in place so that the mounting holes in the cornice coincide with the dowels installed in the wall or ceiling, and use self-tapping screws to secure it in the desired position.

In the case of a significant width of the cornice or the overall massiveness of the structure, it is recommended to additionally secure the cornice in the center in one or two places.

Installing blinds on window frames

This installation method is used mainly for horizontal devices. Unlike attaching a curtain rod to a wall or ceiling, this method Many home craftsmen find it difficult.

Many people do not quite understand how to attach the structure to the frame of plastic windows. Meanwhile, the same self-tapping screws or self-tapping screws are used for this.

IN in this case When drilling an aluminum or polyvinyl chloride frame with a self-tapping screw, the tightness of the window does not suffer at all.

To do this, as in the first case, we make markings in such a way that the blinds evenly protrude beyond the edges of the glazing on both the right and left. In this case, we take into account that all preliminary measurements were made before purchasing the blinds, and they exactly match the size of your window. We install the blind holders directly on the window frame, using metal screws for fastening (for aluminum frames) or ordinary screws (for PVC frames). For more information about installing blinds, watch this video:

We snap or screw the supporting cornice onto the holders, depending on the design features of the device. We install sequentially on the cornice rotating mechanisms with control cords. It is also possible to install blinds of this type in the inter-frame space if you have double wooden frames at home.

The light protection device is mounted on the inner frame on the side facing the outer frame. To control the blinds in this case, a hole is drilled in the upper part of the frame through which the cords are threaded rotary system. To learn how to install blinds without screws, watch this video:

As you can see, installing any type of blinds on windows can be easily done with your own hands. This will allow you to significantly save on calling a team of professional installers. To carry out the work it is enough to have only standard set home construction tools and necessary mounting hardware.

A few years ago, curtains began to be replaced everywhere with blinds. Now they can be found in offices and living spaces, in shopping areas and on the windows of cafes and restaurants.

Features of installing blinds

In order for blinds to serve for a long time, you need to be extremely careful when installing them. Only a balanced, competent approach will ensure the normal functioning of this fairly complex design. But if you understand all the nuances, you can install blinds in place very quickly.

The main thing is not to forget about the features of each design and take everything into account in the assembly. The installation process is influenced by the walls, namely how smooth they are. Any deviations from the correct level, both horizontally and vertically, will lead to significant complications during operation. Therefore, if in your case there are obvious curvatures of the walls, it is better to invite a specialist with experience in resolving such issues.

If you still decide to install blinds on your own, you need to study the available information, delve into all the details, and be patient.

Basic methods of installing blinds

There are four ways to install blinds.

1. Inside the window opening.
2. For each window sash respectively.
3. To the ceiling
4. On the walls.

When choosing an installation method, you should be guided by your preferences. You can decide which method is right for you based on the design of the window. In principle, blinds can be installed on any windows, including attic windows, but the mounting method will have its own characteristics. The sequence of actions will be similar in any case. Installation methods differ from each other only in some small details.

Sequence of actions when installing blinds

Measuring is the first step

First you need to correctly measure the window opening. Each type of installation has its own nuances that must be observed when taking measurements. This must be done in order to navigate the size of the blinds and decide on a suitable design.

Advice! Subtract 2 cm from the resulting dimensions of the window opening if it is decided to attach the blinds directly to the window opening. This technique allows you to accurately determine required size Therefore, in the future you will not have to deal with the problem of too long blinds that rest on the window sill and bend unsightly.

If you decide to attach the blinds with an overlap, you need to add 5 cm on each side in width so that the window is completely closed. The length will depend on your preferences or the designer’s advice. It can only be slightly below the window sill, or it can reach the floor. If you plan to attach blinds to each window sash separately, then you need to measure these parts of the window without taking into account the fittings. When taking measurements, you must try to be punctual. Only correct measurement and ideal geometric proportions will give impeccable appearance and uninterrupted functioning of the blinds in the future. If the measurement reveals the curvature of the window, you should try to adjust the parameters to the correct figure.

Marking - step two

Before installation, mark the fasteners. Since the design of any blinds is geometrically verified, markings must be carried out with millimeter precision; symmetry also matters great importance. While marking, you need to check how the light-protective devices that you have prepared will work. Will it be possible to open and close the window freely after installing them? Having determined where the control cord will be, you need to mark this place and make additional fastening in this area. It is necessary because more pressure will be placed on this area.

Installation - step three

Guided by the markings, you need to attach all the existing parts using dowels and screws. They are screwed into the wall or ceiling. The cornice is hung on these screws. It is used to fix runners and slats, which are simply threaded into the prepared cornice. After completion of work, the functionality of the light protection device is checked.

Features of installing blinds on plastic windows

Quite often it is necessary to install blinds on plastic windows. And this is not very simple. In this case, both the blinds themselves and the window can be rendered unusable quite quickly. To avoid unpleasant consequences, all manipulations must be carried out with maximum caution.

The main subtleties that must be taken into account when working with different types blinds

Vertical blinds

The most popular is the vertical variety. It is used in offices, public institutions and in ordinary home environment. Color variations are limitless, and the ability to combine colors and shapes gives scope to the most daring design ideas. To install vertical blinds, you need to prepare all the necessary elements:

• cornice;
• slats;
• runners;
• chain.

If the window has an unusual format, you should provide a chain of appropriate length so that it looks appropriate and does not limit the functionality of the entire device. Vertical blinds can be mounted to the wall or ceiling. If you decide to mount the device to a wall, you can choose an area just above a window or directly near the ceiling. If you attach the cornice to the ceiling, then you need to choose an area close to the wall surface at a distance slightly greater than the width of the lamella.

When were the blinds purchased? the right size, colors and quality, mark the fastening elements and install them. Once the brackets are installed, the cornice is attached to them. Runners are put on the cornice and slats are hung on them. When hanging the slats, you must follow the order in which they were placed in the packaging.

Finally, you should take care of the weights. This type of blinds cannot function without them. These weights are suspended at the bottom of the device on chains on both sides (inside and outside). All .

Video on m installation of vertical blinds

Horizontal blinds

This type of blinds has not lost its relevance for many years. Plastic devices are used everywhere, because they are so easy to choose by color and size.

Their design features sometimes cause difficulties for beginners, and they cannot install this type of window decoration.

Horizontal blinds are most often installed on the wall, sometimes they are attached directly to the window. They are mounted to the wall if it is necessary to completely decorate the window opening. Attaching to a window means mounting to the sashes; this option does not limit the functionality of the window itself. It can be easily opened and closed without any obstruction.

Self-installation of horizontal blinds includes the same steps as in the case of the vertical variety:

• froze;
• marking;
• cornice fastening;
• installation of blinds.

Recommendations for installing blinds using self-tapping screws

Before you drill a hole, you need to make sure your markings are correct. To do this, the fasteners are inserted into the cornice and pulled by the cord. Let the blinds open all the way. Next, they are brought to the intended mounting location and visually assessed whether the markings are applied correctly and whether the blinds will open smoothly if they are mounted as planned. If there are distortions, you need to make more correct marks with a pencil. Then the brackets are removed from the cornice, they are brought to the marks and points are precisely placed in the places where the self-tapping screw will be screwed in.

Videos installing blinds on plastic windows

Advice! It is better to first drill the holes, and then bring the part to this place and attach it. This method ensures that the integrity of the plastic is maintained. After all, screwing a self-tapping screw through a fastener often ends in the appearance of cracks.

When the holes are ready, the brackets are screwed to them and the cornice is hung. It is inserted into the fasteners, and then they are closed. Next perform the following actions:

• installing a hook in the control mechanism;
• installing a cane in a hook;
• the tip is attached to the cane;
• installing a bell, securing it with a knot;
• blinds are lowered by a cord;
• installation of lower fixation with a self-tapping screw.

In general, installing blinds is not difficult. However, you must comply with all requirements, be careful and careful. You cannot ignore the instructions that come with the purchased blinds.

Video m installation of horizontal blinds

Installation of blinds without drilling

Some types of modern brackets can be attached to the frame without drilling. It is very comfortable. Such blind systems are mounted on brackets using conventional snaps. In this case, they are not only easy to attach, but also easy to remove to wash the window or tidy up the slats themselves. To attach the brackets without drilling, you need to purchase a special variety of these fasteners. L-shaped brackets are needed; they can be easily hooked to the top of the window sash. They can also be easily removed if necessary. But such a bracket cannot be attached to a blind sash; this is only possible with opening sashes.

The L-shaped fastening is considered the most optimal when attaching blinds inside a window opening. It maintains the integrity of the profile, ensures reliable fixation of the blinds, and is easy to put on and take off. Fastening with tape is less thorough. It will last long years, if it is not given excessive loads, but if handled carelessly it can quickly break.

Blinds are optimal device, providing protection from sun rays. Various design options allow them to be a real decoration of rooms, creating unique style Houses.

Large windows in an apartment or house are, of course, good. A lot comes into the room daylight, especially if the windows are new from profile or wood, allowing you to maximize the glass area. However, there is often too much sunlight, especially if the windows face south or east. There are several ways to escape the scorching sun, and the simplest and most optimal of them may be to install blinds on your windows yourself. Other options include replacing double-glazed windows with the installation of tinted glass or using tinting film. Only this option is much more expensive and not as effective if you want to completely block access sunlight into the room.

Types of blinds and mounting features

On this moment window manufacturing companies provide wide choose blinds of various configurations and the ability to make them to fit specific window sizes. Among possible variations There are several main types of blinds:

• vertical;
• horizontal;
• roller shutters (fabric, internal roller shutters).

The option of installing vertical blinds in a residential apartment or your own house is quite questionable. Still, they are too strongly associated with office space. However, they are also suitable for some design solutions interior execution. They are mounted above the window, actually instead of curtains, which further limits their usefulness.

A more extensive number of mounting options is provided by the use of horizontal blinds. They can be installed on top of the window opening and along the outer edge on the upper slope of the window and directly on window design, in this case, separate blinds are installed on each sash. Two latest options They will go well with any curtains and curtains, and choosing the latter type of installation on the window itself will not take up any space on the windowsill. Roller shutters are also mounted directly on each glass.

Everyone must choose the appropriate option independently, based on their preferences and requirements.

Common methods of attaching blinds

Having decided on the type of blinds to be installed, you can go order them from a good window manufacturer. It’s better, of course, to contact the same company that made your windows. To order you will need to give detailed dimensions windows or the dimensions you require when it comes to blinds installed over the window opening. Blinds are made quite quickly, the technology is as well developed as the production of the windows themselves, especially since the design is quite simple.

Along with the blinds themselves, as a rule, instructions are also included, which tell in sufficient detail how to install the blinds. The whole process is quite simple, and everything can be done with your own hands. If you have some skills in working with a screwdriver, you have the necessary drills, screwdrivers and a ruler with a pencil, then you can begin the installation process and do not need the help of a master installer.

It is worth considering in detail the option of installing horizontal blinds directly on the frame of each section of the window and sash. This process the most complex and visual. Note that the installation of roller shutters occurs in a similar way.

So, the packaging from the manufacturer contains everything you need to install blinds. The main part is wound with fishing line and control chain. All additional parts and screws are packed in bags. Everything is carefully unwound, and all trim is removed from the curtain rod. There are several ways to attach blinds to a window sash:

1. fasten with screws;
2. use brackets for fastening;
3. the old fashioned way, by drilling holes in the wall;

In the version with screws, holes will inevitably be made in the window profile. This is a reliable and durable method of fastening, especially since the tightness of the entire window and the profile in particular will not be affected. However, for some this may not be suitable, if only because the blinds may have to be removed, and then the holes will already be significant drawback. In order to avoid these consequences, you can use the option of securing the blinds to brackets that are attached to the frame different ways not requiring the creation of holes.

Installation of blinds with drilling plastic or using a screwdriver

In the first option, using screws, it is necessary to place and mark the position of the top bar of the blinds, which will be directly attached to the window, as accurately as possible. The most common and simple option is a structure that is located along the upper edge of the glass unit and only with its wing-grooves extends onto the window frame. Strict attachment to the top of the sash allows you to install the blinds yourself, even without special precision and measurements.

If you have a plastic window, then you don’t have to think about drilling at all. Most manufacturers have blind models that require screws screwed directly into the profile to securely fasten them.

example of horizontal blinds

Attach the carrier to the glass unit at the very top of the sash frame. Due to the different depth between the plane of the glass unit and the frame, the fastening plates may not fit tightly to the window profile. To eliminate this gap and securely attach the plates to the window, special U-shaped pads are used. They are placed from one to several pieces until the gap is completely closed. Mark the position of the carrier along the lower edges of the fastening plates, so that later you can use them as a guide and hang the blinds evenly on the window.

You can attach blinds to plastic windows with screws directly into the profile using a screwdriver. They will easily fit into the plastic and will hold securely. You can first mark the position of the screws and make holes in these places with a drill of approximately 1.5 mm. This, firstly, will eliminate the possibility that when tightening the screw the carrier will move slightly and, secondly, will eliminate the risk of cracks forming in the profile. The latter case is practically unrealistic for new windows, but it is possible if the windows have been standing for several years or are made not of plastic, but of wood.

As soon as the last screw of the fastenings is tightened, you can begin to fasten the fishing line, which will hold the blinds in the plane of the sash when opened. To do this, two holes are made in the lower bead of the sash along the edges. They must be located strictly under the corresponding fishing line exits on carrier system blinds. A 2.5 mm drill is used. The fishing line, threaded into the blind system and lowered at the ends to the bottom glazing bead, is threaded into the special plugs that are included and tied in knots. All that remains is to thread the plugs into the holes and pull the entire line from above. The line tension should not be strong, but it should not sag either.

All that remains is to put the trim on the carrier of the blinds, check their operation and glue them in suitable places fastenings for the control chain and flexible lever.

Video: attaching blinds with screws

Installation of blinds without any drilling

Using brackets can help you figure out how to attach blinds to windows without drilling. They are attached to the frame in various ways, and the support of the blinds themselves is snapped or screwed onto them. This system The good thing is that later the blinds can be easily detached for major cleaning, or you can completely remove the blinds from the window and use it without them, if necessary. In this case, there will be no extra holes left in sight, and the tightness window profile will not be broken.

The brackets can be secured, as in the first case, with screws or in one of the following ways:

1. hook on the upper part of the sash profile (installed only on opening sashes);
2. using double-sided tape.

Using the first option allows you to remove even all the brackets from the window in one fell swoop and does not require any additional actions at all with screwdrivers and holes. The second installation option is similar in installation to the described option when using screws, only gluing is done rather than screwing.

Instead of holes for the holding line, special fasteners can be used, which are also glued to the bottom of the frame with double-sided tape.