Universal mounting kit for radiators. Kit for radiators: selection, features of footers, o-rings, Mayevsky taps, plugs and brackets. Battery Connection Guide

In the picture below we see two installation kits at once, which are used to connect the heating radiator to the heating system. The dimensions of all elements are selected in such a way as to install the heater in a pre-specified location; the usual installation location is the space under the window, in the middle. It should be understood that the distance between the pipes is different houses will be different, the installation kit corrects this state of affairs.

The dimensions are not taken from your head, they are given by the measurer.

Please note which Consumables we use at work. Angles and tees can be suspiciously cheap, but there are some like the one in the picture. They are a little more expensive, but it doesn’t get any better, it’s been tested. The pipe used is reinforced steel. Bugatti cranes. Everything is like for yourself.

The cost of such an installation kit starts from 4200 rubles. The installation kit includes: two brass Bugatti ball valves (Bugatti), bypass, necessary angles, tees, pipes; Depending on the number of components, the price will also change. The price of the installation kit includes warranty, assembly and installation on an existing riser.

And this is a universal kit for installing a radiator, which is often mentioned when talking about prices for an installation kit (the photo shows the original Vivaldo kit (Italy), from other manufacturers it looks about the same). Do you see the difference? Brackets for attaching the radiator to the wall in this kit do not need to be purchased separately, but there are some that do not have them. The standard kit includes:

• Adapter 1"; - 1/2" left - 2 pcs.;
• Adapter 1" - 1/2" right - 2 pcs.;
• Plug 1/2" - 1 pc.;
• Air release valve (Mayevsky valve) - 1 pc.;
• Key for air release valve - 1 pc.

The cost of such a radiator installation kit actually starts from 700 rubles, that is, it is almost 6 times different from the price of the installation kit in the first photo. But the difference between these sets is visible, isn’t it?

You will also need the radiator installation kit from the second photo: there are no adapters and fasteners in the box with the heater, they must be purchased separately. This is reasonable: the same radiator can be mounted in a heating system in several ways.

So, the installation kit and the radiator mounting kit are different things. Their cost may differ several times.

note

One of the problems of installation companies, and subsequently clients, is the incompatibility of the radiator and fittings, which, if warranty case leads to controversy.

Identify the guilty party in this case impossible, since the installation organization refers to the incompatibility of the radiator and fittings, radiator manufacturers rely on unskilled labor installation organization, or the fact that the fittings are not suitable for this type of radiator, and the fitting manufacturers are not suitable for both.

In our case, disputes of this kind are completely excluded, since Vivaldo is a manufacturer of not only radiators, but also complete set accessories necessary for installing radiators: installation kits, mounting kit, Mayevsky tap, plugs, as well as ball valves and thermostatic valves.

Connection kits for heating radiators are intended for fastening and connection, and of stainless steel in heating systems with: hot water or heated antifreeze liquid circulating under a pressure of no more than 16 bar. All products are made from stainless steel, brass or aluminum, as well as high quality plastic and silicone (for auxiliary fasteners).

Composition of the connection kit for heating radiators

The installation kit for heating radiators consists of several connecting elements, seals and tools for installation:

• foot - 4 pcs. (right and left) with silicone seal;
• sealing plug;
• air vent;
• air vent key.

For heavier ones, the connecting kits are supplemented with special brackets and anchor hardware for fastening to the wall. In stores you can also find extended kits, which include radiator plugs, Ball Valves, designed to seal unused functional openings and remove air from the system. The cost of an installation kit for heating radiators can vary depending on the number of components. average price in stores it ranges from 200 to 300 rubles.

How to choose the right installation kit?

When choosing kits for radiators, the type of radiator is taken into account, as well as the complexity of the work to be done and the installation method. Often professional installation requires the purchase of additional fasteners to securely fix the sections to the wall.

Before purchasing connection kits for radiators, it is important to ensure their compatibility with pipes and pipes, as well as functional openings.

Important! Modern radiator connection kits are designed exclusively for lightweight aluminum and bimetallic (a combination of aluminum and steel) products. For massive cast iron sections you need to look for special fasteners and adapters.

Optimal for any modern system heating systems are kits for connecting a radiator in an extended configuration. They are more expensive, but they allow you to find The best decision during installation without additional expenses. The more complete and universal the installation kit, the more more possibilities for light and quick installation. If necessary, consult with the seller - he will suggest a suitable list of components for the installation of specific equipment.

If you are producing self-installation or replacing heating radiators, then in addition to the main structures you need to purchase additional components. In order not to purchase all the elements separately, you can buy a ready-made kit for a heating radiator; it contains everything required for work.

In this review, we will tell you what types of kits there are and what criteria to pay attention to when choosing in order to purchase a quality option.

How to choose the best option

Firstly, you need to know what diameter of pipes will be used, for thin-tube options a 1 2 radiator kit is used, for pipes with a diameter of 16-20 mm the ¾ option is used.

Secondly, when purchasing, you need to pay attention to a number of criteria:

Important!
When purchasing, it is best to purchase products famous brands, it’s good if the manufacturer of the radiators and components are the same.
If the manufacturers are unknown, then use all of the above recommendations to choose the best one.

What is included

Let's look at what elements are included in the complete set and what each node is intended for.

Futorki

The following can be said about this element:

• The set of plugs for radiators 3 4 includes 2 fittings with right and two fittings with left threads, inner size which is ¾ inches, in sets for ½ inches the thread is correspondingly smaller.
• Size external thread always equal to 1 inch, since this is the standard used by all radiator manufacturers.

Important!
Many buyers do not understand why there are 4 footers in the set, because you only need two.
Everything is very simple: the manufacturer does not know the type of connection on your radiators, and the presence of four elements allows you to use any option.

• In order for the connections to be not only strong, but also airtight, they should be additionally sealed. For this, it is recommended to use tow and paint, but if you don’t have them on hand, you can also use Unipack tape. It is important to eliminate any possibility of leaks.

O-rings

Many people do not pay attention to these elements, but they are very important:

• Products can be made of paronite or silicone. Many experts recommend the second option as more reliable and durable.
• It is important that the ring is positioned evenly and that when tightening the elements it is not pinched too much, since you can simply crush it.

Mayevsky tap and plug

The following can be said about these elements:

• The plug is necessary to cover one of the lower terminals, which will not be used for wiring. It is similar to a futorka, but does not have a through hole and looks more like a cork.
• As for the Mayevsky faucet, it is a structure with a needle valve located inside it, with its help you can very quickly remove excess air from the valve. It is important that the kit includes a special key, which is used to vent the radiator.

Brackets

The reliability of these elements is important, since the strength of the element’s fastening depends on it. Not every radiator kit includes these products, since not everyone needs them, and their price is quite high.

If you do the fastening yourself, then consider the following recommendations:

• For wooden and plasterboard surfaces elements in the form of corners or special plate holders are needed. For brick and concrete walls products in the form of pins and saber-type elements are suitable.

• For concrete and brick, you need to drill holes in the walls and insert dowels into them, it is important to place it on the same level so that the radiator is positioned without distortion.

You can find two options on sale - a kit for a radiator 3 4 and 1 2. As noted above, the choice of a specific option depends on the diameter of the pipes, otherwise they are absolutely similar. The most important - high quality products.

Conclusion

Usage ready-made kit allows you to avoid purchasing all the elements separately, which greatly simplifies and speeds up the process; besides, the set always comes with installation instructions. The video in this article will tell you Additional information on the topic we have considered.

An installation kit for a heating radiator will help you install convectors in your home. Do not confuse the installation kit and the installation kit - these are two different things. The latter includes plugs, valves, and adapters. And the battery kit includes everything without which you will not be able to install your heating device in the chosen location.

Components

Usually the batteries are installed under the window, in the middle. But each room has its own distance to the pipe from the corner coolants. Mounting hardware will correct this situation. It usually includes:

1. Accessories according to your sizes.
2. Mayevsky crane.
3. Threaded adapters and plugs.

Sometimes there is incompatibility between the heater and the fittings. Therefore, when purchasing, you must immediately purchase and installation package specifically for this type of product and in accordance with its installation dimensions.

Varieties

Depending on what kind of house you live in (multi-story apartment house, a private house etc.), the purchased accessories will also depend. She may be:

1. With diagonal connection.
2. One-sided.
3. Bottom connection.

The diameter of the connection fittings will also depend on the diameter of the pipes of the product.

For wall mounted radiators

For canopy species Products use different brackets - pins, brackets or corners. IN wooden premises Only the corners are used. Before hanging your heating device, you should already have the necessary kit to connect the device to the heating system.

Mayevsky crane

This assembly kit element used to bleed air from the battery. When a heating device stops heating, one of the reasons is air accumulated in the pipes and heating device, which needs to be forced out. For this they use Mayevsky tap, which must also match the product in both composition and diameter. It is usually made of brass. You need to open it for a while in order to heating system started to function again.

Read also: Radiators with bottom connection

Many manufacturers are already producing heating devices with such a valve. When connecting, it must be tested first.

The standard installation package does not include a number of elements, without which it is sometimes impossible to complete the installation. They are purchased separately. Such components include:

1. Sealant (for silicone batteries).
2. Hemp or fum tape (for tightness).

And depending on priorities:

1. Reflective screens behind batteries.
2. Frames for heating devices.
3. Evaporator for radiator.
4. Fan.
5. Dryer.

Ease of purchase

So that during installation and installation there is no confusion, unnecessary components or missing parts of the kit, manufacturers have provided targeted mounting kits for specific

Various components for heating radiators that are necessary for attaching heating radiators, as well as their connection - linings for heating radiators, eccentrics for heating radiators, reflective screens behind heating radiators and much more - are not included in the basic kit. Therefore, you will have to purchase them yourself. When choosing a bracket for a heating radiator, you need to be guided by the calculation that for 3 sections of the radiator you need one fastener for radiators. The heating radiator must be located exclusively horizontally.

If you use a good kit for connecting heating radiators and perform all the work related to the fastening and installation of radiators efficiently, then heating system will work with maximum efficiency and reliability.

The efficiency of the heating system largely depends on whether the type of heating radiator and the fittings for the heating radiator are selected correctly, including the connection points for the heating radiators.

Heating radiators can be divided into two main groups: sectional radiators and panel radiators. The former can be bimetallic or made of aluminum, but panel radiators are made of steel. In case of sectional radiators Usually a side or diagonal type connection is used, but for panel radiators a side or bottom type connection is used. For all this you will need various accessories for radiators and consumables (for example, sealant for a heating radiator).

Connecting heating radiators

The choice of connection diagram for heating batteries may depend on the following factors (and it will depend on shut-off valves for heating radiators):

• Number of floors of the house;
• Type of heating radiators, as well as their dimensions;
• Type of heating system: single-pipe or two-pipe;
• Coolant pressure in the heating system.

Heating devices can be connected according to one of three schemes:

• Scheme diagonal connection assumes that water enters from the top and exits from the opposite bottom side. This scheme is usually used for private houses, where multi-section batteries are installed. The scheme can be used not only for single-pipe, but also for two-pipe heating systems. This connection diagram cannot be used in heating systems where operating pressure is high.

• IN multi-storey buildings, most often found side diagram single-sided connections. This scheme is suitable for those heating systems that use a coolant with quite high temperature. If such a circuit is connected, water will enter from above and exit from below, but from the same side.

• The lower type connection diagram is used for those types of radiators in which the connection is of the lower type. In this case, the entire heating system is hidden under the floor, since the heating system pipes go into the floor. The length of the battery does not matter if you choose this type connections, as the battery will heat up evenly.

Depending on the choice of connection diagram or type of heating radiators, it will be necessary to select a specific installation kit, which will include fittings and components, mountings for radiators.

IN standard set Connecting heating batteries includes the following components:

• Stub;
• Threaded plug;
• 4 footers;
• Bracket for radiators, mounting of heating radiators;
• Gaskets for heating radiators made of paronite or silicone.

Adapters are usually included in the kit in pairs, with right and left threads for an external type pipe.

They are screwed into the heating radiator on the left and right sides. Thread internal type under the valve for the heating radiator and taps for the heating radiators is the same for all adapters.

The Mayevsky tap is useful in a situation where heating radiators stop heating the room due to air accumulated in them. To return the radiator to its former performance and efficiency, you just need to open the tap. Typically, such a valve for a heating radiator is made of a material such as brass and has a chrome-plated coating.

A threaded plug is required to seal all threaded holes that are one inch in diameter. In order to seal the nipple connection of the radiator sections, various gaskets are used.

In order to mount a heating radiator to the wall, you need fasteners for heating radiators.

Brackets can be corner or anchor type. Pin-type brackets can be used for any type of wall, but for wooden walls Only corner brackets can be used.

Sometimes the installation kit may include gaskets that are installed between the wall and the heating radiator. If you include in the circuit a component such as a bypass for heating radiators, then such a jumper to the heating battery will regulate the temperature of the battery. You can also use a thermostat, a thermal sensor for a heating battery or insulation for a heating radiator, as well as a meter for the heating battery, however this method more expensive.

Choosing a kit for connecting a heating radiator

The diameter of the supply pipes plays an important role when choosing an installation kit. The half-inch kit is suitable for polymer pipes with a diameter of 16 and 20 mm.

If you need to connect panel batteries made of steel with a side-type connection, then you will only need to buy a plug and a Mayevsky tap. Standard type kits for connecting radiators are not required, since such radiators already have internal thread with a half-inch diameter. Thanks to the presence of such threads, pipes can be screwed in immediately without adapters.

Do not forget that you may need consumables such as: sealant for radiators made of silicone, fum tape or hemp. Typically, such materials are not included in the basic kit.

Heat-reflecting screens are also often installed behind heating radiators. They are designed to increase efficiency and heat transfer. Heat reflectors behind the radiator are made of foil, penofol, Porylex with foil. Reflectors for heating radiators should be made of a material that has a low thermal conductivity coefficient. If your heat shields for radiators are made only of foil, then it will transfer some of the heat to the wall. Therefore, you need to make a layer. Reflectors for radiators can also be made from rolled foam.

All fittings for the heating battery, components and Additional materials– jumper on the heating radiator, manifold for radiator heating, plugs for heating radiators, an evaporator for a heating radiator, a fan for a heating radiator, a dryer for a heating radiator and much more - these are also integral elements of the heating system. Without them, it would not work as effectively.