Heat exchangers Mashimpex NT series. Heat exchangers Kelvion (GEA) Mashimpex Plate heat exchanger nt series

Seal range for GEA NT100 (T, M, X)

The seals for GEA NT100 plate heat exchangers are gaskets made from various materials with several modifications.

Prices are indicated in rubles, including VAT

EPDM(abbreviated from ethylene propylene diene monomer) is EPDM ethylene-propylene rubber that can withstand heat exchanger operation at coolant temperatures up to +150 ... +160 0 C. EPDM material is suitable for operation of the GEA NT100 heat exchanger with steam and water without oily inclusions.

NBR(abbreviated from nitrile Buna-N rubber) – butadiene acrylic-nitrile rubber with maximum operating temperature coolant +120 0 C. NBR material is suitable for operation of the GEA NT100 heat exchanger with steam, water, mineral and vegetable oils.

NBRP(abbreviated from nitrile Buna-N rubber peroxide) – improved butadiene acrylic-nitrile rubber with a maximum operating coolant temperature of +130 0 C due to the addition of components to the feedstock that increase the operating temperature of the seal. NBRP material, like NBR, is suitable for operation of the GEA NT100 heat exchanger with steam, water, mineral and vegetable oils.

Special seal materials for GEA NT100:

HNBR(abbreviated from hydrigintated nitrile Buna-N rubber) - butadiene acrylic-nitrile hydrogenated rubber with a maximum operating coolant temperature of +145 0 C. The HNBR material is suitable for operation of the GEA NT100 heat exchanger with mineral and vegetable oils. Steam-oil is especially often used in steam heat exchangers, in which the operating mode allows the temperature to rise up to +145 0 C (short-term up to 155 0 C).

VITON - STEAM ®- (steam VITON). Also known as a type of fluoride rubber, FPM. The material belongs to the group of special temperature-resistant materials and is intended for GEA NT100 plate heat exchangers, in which steam with an operating temperature of up to +200 0 C is used as a coolant. GEA NT100 heat exchangers with seals made of VITON - STEAM material are most often used in boiler houses as the main water heaters water.

FPM - G (VITON - G ®)– a type of VITON material for use on GEA NT100 steam-oil heat exchangers.

Note: VITON® is a registered trademark of DuPont.

BUTYL - HT(butyl) – a special chemically resistant material, heat exchangers with seals made of which are intended, in particular, for heating alcohol and alcohol-containing media, since ordinary materials(for example EPDM) do not withstand contact with alcohol.

HYPALON, SYLICON, NEOPREN– special chemicals resistant materials GEA NT100 seals for very specific applications.

E8 specialists will help you choose the material that best suits you in terms of price/service life ratio.

(The most popular positions of the NT Series are nt100xhv, nt100xh, nt100th, nt100mh, nt50mh, nt50xh, nt50mhv, nt50xhv, 2nt50mh, 2nt50mhv, nt150lh, nt150lhv, nt150shv, , 2nt100mhv/cdl, 2nt100th/cdl, nt100tv)

Gasketed plate heat exchangers NT Kelvion Mashimpex (GEA Mashimpex)

Improved specifications, wider range of applications, ease of maintenance when minimum cost- all these are plate heat exchangers of the NT series.
The optimized profile and corrugation configuration of the plates makes it possible to achieve greater heat transfer power with a smaller heat transfer area due to a more uniform distribution of flows across the entire width of the plate. Naturally, this significantly reduces the cost of the new NT series heat exchangers.
The NT series of plates expands the range of applications of heat exchangers. A wide variety of plates allows plate heat exchangers to be used more flexibly and efficiently in various technological processes.
The use of a new type of seal fixation and a new special plate design simplifies and speeds up maintenance, and also guarantees accurate seal fixation and self-positioning of the plate pack.
Wide choose NT series plate sizes and profiles ensure optimal heat transfer and minimal pressure loss in NT series heat exchangers

Features of the new NT series
OptiWave design

AutoLoc Technology

IN new series NT implements a plate self-positioning system. The use of this technology greatly facilitates and simplifies the assembly of heat exchangers: . When assembled into a package, the plates are automatically aligned and self-positioned. . Incorrect assembly of the plate stack is eliminated, which helps extend seal life.

ECO-LOC system seals

Heat exchanger Mashimpex model NT 100 T- plate apparatus of collapsible type. Effectively used in housing and communal services, as well as in the energy, food, petrochemical and other industrial sectors. Operating since 1997 and occupying one of the leading positions in the market engineering equipment, the Mashimpex company regularly modernizes its manufactured heat exchangers.

The NT 100 T plates are designed in such a way that the flows are distributed evenly over their surface. Small area plates ultimately gives greater heat transfer. And increased efficiency allows you to save money.

Advantages of the Varitherm NT 100 T model

automatic alignment and self-positioning of a set of plates;

more reliable optimal fixation of non-adhesive seals using ECO-LOC technologies (NT series), ensuring complete tightness;

optimized profile and plate corrugation configuration.

This simplifies Maintenance heat exchanger, the possibility of incorrect collection of plates is excluded. In addition, Mashimpex heat exchangers have a self-cleaning effect from scale, which is ensured by high flow turbulence. Generally, correct installation, use and care of a collapsible plate heat exchanger allows you to use it without problems for at least 15 years.

Technical characteristics of the Varitherm NT 100 T model

Application of the Varitherm NT 100 T heat exchanger

Plate heat exchanger Mashimpex NT 100 T is effectively used in housing and communal services, as well as in energy, food, petrochemical, engineering, metallurgical, textile and other industries.

Heat exchanger Mashimpex NT series is a plate collapsible heat exchanger. Uniform distribution of flows across all plates is achieved due to the optimized design of the plates, which provide more power with a smaller heat transfer surface area. The method of fixing non-adhesive seals has been improved. The plate stack automatically aligns and self-positions, making maintenance easier by preventing plates from being misassembled.

Improved plate specifications collapsible heat exchangers Mashimpex NT expanded the scope of their application, allowing consumers to use them more effectively in various industries (energy, petrochemicals, heating, ventilation, etc.).

Questionnaire for ordering a heat exchanger

Design of a package of plates of a collapsible heat exchanger Mashimpex NT

Technical characteristics of Mashimpex NT series gasketed heat exchangers

Experienced, highly qualified specialists of the Gazovik - Teploenergo company will help you select and buy what you need gas equipment beginning with gas filter or valve and ending with a powerful industrial boiler, hydraulic fracturing, modular boiler room or ITP. And our logisticians will deliver the ordered equipment to any region of Russia or neighboring countries. You can contact us by multi-channel phone number 8-800-555-6518 or via email [email protected]