Shoe dryer sht 1129 how to disassemble. Timson - a device for antifungal treatment of shoes: how to choose a unique dryer. What to look for when choosing

Article: Error codes and options for eliminating them in Roomba robotic vacuum cleaner models

Owners of a robot vacuum cleaner have probably encountered a situation where the robot suddenly stops its work and begins to squeak plaintively or wink playfully different colors indicator, or even better, he babbles something “not our way.” Sometimes the problems encountered along the way of the vacuum cleaner are obvious (tangled in the wires), but more often than not, without instructions it is impossible to figure out what it needs and what it requires.

We offer a mini-cheat sheet that will help you understand your robot and quickly fix the error.

So…

One sound pulse means that your robot is stuck, or one of the drive wheels is not touching the floor (for example, it is hanging from the stairs or has fallen between the slats of the heated floor grate) with one of the drive wheels (or possibly both). In this case, you need to move the robot to flat surface and put it back into operation.

If the robot vacuum cleaner beeps twice, it means that for some reason the main brushes have stopped rotating. To resolve the problem, remove the brushes and clean them of any accumulated hair, threads, or pet hair.

The robot vacuum cleaner stopped and beeped 5 times - check the drive wheel. Perhaps hair or threads are wrapped around it, which prevents the wheel from rotating without difficulty.

Six beeps indicate that the fall sensors are dirty or the robot is stuck over a ledge. To resume operation of the vacuum cleaner, wipe the sensors with a clean, dry cloth and start the robot again.

Seven beeps in a row sounded by your assistant mean both drive wheels are locked. In this case, it is necessary to eliminate all obstacles blocking normal operation vacuum cleaner.

The robot sent eight sound pulses - this notifies that the front roller is blocked. To continue cleaning, you must first remove and clean the roller from threads and hair entangled in it. After this, feel free to put the robot into operation.

Nine signals from your assistant mean that the vacuum cleaner is blocked due to jamming of the bumper or contamination of its sensors. In this situation, it is necessary to carefully inspect and carefully clean the front bumper of the vacuum cleaner. After all manipulations, the robot is ready for use again.

If the robot fails to hit any obstacle (the starting point of cleaning) for a long time, it will stop and beep eleven times. Make sure the area you are cleaning is not too large for the vacuum cleaner. To limit the area for work, use a “virtual wall”. Also, the robot may not respond to obstacles if the front bumper malfunctions. To check the functionality of this part, press it several times.

Twelve beeps from the robot vacuum cleaner will indicate that the fall sensors are damaged or dirty. To eliminate the error, check and, if necessary, clean the sensors.

Voice signalRemove and clean Roomba" s brushesencourages you to clean the vacuum cleaner brushes from accumulated debris that prevents it from rotating in normal mode.

The robot said WITHlean Roomba's cliff sensors. There are two possible reasons for your vacuum cleaner’s dissatisfaction: either the fall sensors are dirty, or the robot started cleaning from a ledge and considered moving off it as a fall. Wipe the sensors with a clean, dry cloth and start the robot on a flat surface.

A voice messageInspect and clean Roomba" s wheel( s) indicates that the robot's drive wheel is locked or not touching the floor. In this case, you need to clear the wheels of debris wrapped around them and start the robot cleaning on a flat area.

Robot serves light signals

The robot's red lights indicate that the problem is in the battery.

One flash of red light indicates the possibility that the battery is not connected. In this situation, make sure that the yellow protective plate is removed from the robot. To do this, open the bottom cover of the vacuum cleaner, remove the battery, remove the protective plate and insert the battery into place.

Two or three red indicator lights indicate that the battery needs to be charged. After replenishing its strength, the robot will be able to begin cleaning again.

Five light signals will indicate an error during the charging process of the robot. To fix the problem, you need to restart the vacuum cleaner by simultaneously pressing and holding the SPOT and DOCK buttons for about 10 seconds.

Six or seven indicator signals mean that the robot's battery is overheated. Turn off the vacuum cleaner and let the battery cool down, then start the robot again.

If, after carrying out the necessary manipulations, the robot continues to produce light signals, contact the service department.

Rainy weather gives some people a romantic mood, while others feel sad. Be that as it may, its most banal consequence is wet shoes. If it is not dried correctly and in a timely manner, the consequences will be sad: from a quickly spoiled pair of shoes or boots to a serious cold. Someone once thought of drying shoes by stuffing them with newspapers, others out of habit put them under a heating radiator, and others dry them with a hairdryer. Why all this if specialized and inexpensive devices have long been on sale. We look at the existing range and choose the best electric shoe dryers.

Shoe dryers are conventionally divided into the following types:

• conditionally stationary. These are models with one or more pairs of vertical tubes through which air comes out to blow shoes. In some models, the temperature can be adjusted, since it is better to dry expensive leather products with not very warm air. Drying on such devices is faster than on portable ones, but they are also more expensive. In addition, such a device allows you to dry hats and gloves;
• portable. They consist of two heating elements, enclosed in a housing and connected by a cord. These are the cheapest and most popular devices, they are easy to use and do an excellent job of their intended tasks. They can have any shape and size, dry shoes for 4-10 hours, heat up to 60-90 0 C. When choosing a portable dryer, pay attention for build quality: plastic parts should not be glued, but twisted with nuts - this is a guarantee that under the influence warm air integrity will not be compromised. Give preference to models with big amount holes, and the larger they are, the better. Optimal size such dryers are 10-15 cm: such models can effectively dry adult shoes and fit into children's shoes. The dryer should heat up in 2-3 minutes, and its power is low - 10-12 W, so you can safely warm up your shoes without fear of huge electricity bills;
  
• mats and shelves for drying shoes have a power of 35-120 W and provide uniform heating due to convection. The mats are made of wear-resistant rubber, the shelves can be equipped with several strips and look no different from ordinary ones shoe shelf. Some of these models have a built-in timer.
  

It is worth highlighting models with ultraviolet sterilizer, which supposedly prevents fungus. I would like to believe in this effect, but laboratory tests have not confirmed it. Also presented models with ionization, thanks to which it should disappear bad smell.

The best shoe dryers

Timson 2424

Let's start with the most expensive dryer, which costs almost 900 rubles. Domestic company Timson has been in the market since 1995 and has become one of the leading shoe dryer manufacturers. This model has a power of 10 W, heats up to 70 0 C and weighs only 300 g - you can even take it with you to work if it’s raining outside and you don’t think you’ll get there dry. The manufacturer supplied the device UV emitter. back side low cost - short service life. Many Timson dryers fail after 1.5-2 years, but during operation the device shines beautifully with LEDs.

Shushila

A cheap and functional dryer with a power of 7 W, heats up to 60 0 C. It is convenient that the cord is long - 1.3 m. Users note good quality assemblies and the durability of the device, but they say that normal drying will require at least 5-7 hours of work, but heating is carried out carefully, and the price is ridiculous - no more than 300 rubles.

Great Rivers Autumn-2

A domestically produced device for just 200 rubles surprises with its fairly good build quality. Due to his small size(only 10cm long) fits perfectly for drying children's shoes, but the gadget can also be adapted for adult shoes by simply moving it from toe to heel while drying. It heats up quickly and copes with its main tasks quite well, but if your shoes are wet through and through, be prepared that the drying procedure will take about 5 hours. Power – 10 W.

Timson 2426

The model actually repeats the characteristics of the Timson 2424, only it is not equipped with an ultraviolet emitter, which is why the price is more affordable - about 400 rubles. The power is 10 W, it works well, but after a few seasons it may simply refuse to turn on.

IR-3702

The peculiarity of this dryer is that it can be expanded if necessary. Great option for families with children – one device can be used for shoes different sizes. Users note gentle, high-quality drying. Power 13 W, heating up to 80 0 C.

Bradex DRY COAT TD 0048

The manufacturer of this miracle device promises that wet shoes can be dry in 45 minutes. The device runs on batteries or a power adapter and consumes several times less energy than a radiator. You can dry both shoes and gloves with hats on it. The kit includes regular sections for drying and sections with a cavity for filling them with soda, which can eliminate unpleasant odors. The cost is about 800 rubles.

Warm rug TK-2

Another interesting device. Installed inside a mat measuring 80*36 mm thermal film, which heats up within 10-15 minutes to a temperature of 45-50 0 C and can dry 3 to 5 pairs of shoes simultaneously - perfect solution for the whole family. Power 50 W. The cost is about 900 rubles.

Despite the heat outside, the value of shoe dryers not only does not decrease, but perhaps even increases. Personally, even in summer I have to wear shoes. And in the heat, shoes become wet even faster than in the fall.

The other day, when I decided to dry my shoes, I discovered that one of the dryers was not working. We take on the brain repair of our dryers.

So, we turn on our dryers and see that one dryer does not want to light up, and also does not want to heat up at all.

Disconnect from the network. Open the lid by unscrewing the screws. We find the following picture:

The scheme, as we see, is completely uncomplicated. I’ll say right away that the original should have had four LEDs, but somehow they had already burned out. I was only able to assemble three, and simply replaced the fourth with a jumper.

Our dryer has one very vulnerable spot - the heating element. It sits under the radiator plate.

This is true! The wire flew off and our entire circuit became open. Solder it back. You have to solder carefully. It is better to fix it with something until the solder completely hardens. The fact is that the heating element is a ceramic plate on which something similar in appearance to graphite has been applied. Although it may be graphite. The contact points were covered with a very thin layer of foil, and it successfully came off along with the wire. Therefore, it is necessary to solder on the edge of the ceramic and the conductive part. Both there and there the connection will be fragile, but we don’t need to carry bags of potatoes on it.

We believe you. Everything is glowing! And it gets warm!

We carefully turn the record over (this was the most difficult moment for me - a couple of times the wires fell off), and put everything together. Let's check again.

In total, having lost 15 minutes of time, and practically not a penny of money (electric energy and the huge costs of solder and rosin are not taken into account :) we have newly revived dryers, which I bought for almost $15.

We can run to dry our shoes.

Each of us has repeatedly faced such a problem as getting our shoes wet. In the summer we get caught in the rain, in the fall we are surrounded by slush and dampness at every step, in the winter our shoes suffer from the snow. When there is a thaw, moisture seeps inside boots and boots, causing an unpleasant sensation and threatening colds. And no matter how careful we try to be, we have to part with our favorite products quite early.

Of course, many save wet shoes by leaving them to dry near the radiator, but this method soon leads to deformation and damage to the products. And it’s not so easy to dry shoes completely, especially in hard-to-reach places.

It takes a lot of time to dry naturally, and as a rule, it is often not enough. Electric shoe dryers can help get rid of such problems.

Device types

An electric dryer is the simplest device. A miniature and compact product is most often made in the form of heated socks, which you just need to insert into wet shoes, and then plug the cord into a power outlet. Due to thermal radiation the material heats up without touching the surface of the shoes. The dryer has no effect negative influence on the appearance of the shoe, does not deform it, since it dries the surface only from the inside. The device consumes 5-8 W of electricity, which is quite a bit.

Ultraviolet shoe dryer - a model equipped with an ultraviolet lamp. It not only dries boots and boots, but also disinfects them. Such a light bulb does not pose any danger to adults, children and animals, since it has a fairly narrow spectrum of action.

Antifungal. This device works on the principle of a conventional electric dryer, but due to the enhanced radiation spectrum it also has an antifungal effect. A few procedures are enough to ensure that not a trace remains of bacteria and fungi. For the purpose of prevention, this device can be used for slippers and flip-flops that have been in a bathhouse, swimming pool or sauna. An important advantage of such a dryer is its ability to dry wet shoes in a matter of hours. Thanks to double insulation, the product is fireproof.

Let's take a closer look at what an ultraviolet shoe dryer is, since it has an antifungal and antibacterial effect. It is important that this type of device is also capable of removing unpleasant odors. Today, manufacturers produce devices in the form of dryer inserts and lamps.

Ultraviolet lamps for drying shoes

Such devices operate on batteries, so they can be used at work or on vacation. Dryer lamps operate automatically and turn off on their own. Ultraviolet in the shortest possible time destroys fungi, microbes and even Pseudomonas aeruginosa. Special silica gel dehumidifiers absorb moisture and dry, thereby ensuring the safety of any shoes.

Among the features of these devices, one can highlight their fire safety, since they are protected by shatterproof plastic, which will not cause harm, even if you accidentally step on the device.

How do electric UV dryers work?

The ultraviolet shoe dryer is designed extremely simply and consists of heating element and ultraviolet lamp. To completely dry shoes, the device requires an average of 5-8 hours, since it heats up to a low temperature without damaging the skin or other delicate materials.

Such devices consume 6-12 W and are safe even with prolonged use; they cannot lead to a fire.

The design of an ultraviolet shoe dryer directly depends on its cost. average price is 500 rubles or more, depending on the manufacturer and what lamps are installed in the device. Most often, ultraviolet dryers are made in the form of a liner, although more interesting designs are also available.

UV liners for drying shoes

Such products are very convenient for use in everyday life due to their shape that follows the contours of the foot. With their help, shoes can be dried in a few hours.

UV shoe dryer is very economical and balanced temperature regime and a body made of non-flammable plastic completely prevent overheating or fire of the shoes. Thanks to ultraviolet irradiation and a temperature of +70 degrees, shoes are cleaned antibacterially.

How to use UV shoe liners?

Each plastic device is placed inside the shoe, then the device is plugged into the electrical network. After a few hours the appliance turns off. The shoes are perfectly dried and processed. If for some reason the dryer is not turned off, the low temperature will not cause a fire.

Benefits of using an ultrasonic shoe dryer

Electric shoe dryers with ultraviolet light are not cheap, but the costs of such a purchase are fully compensated by the fact that when using the device, shoes, shoes and boots retain a presentable appearance much longer. It is especially recommended to purchase a household dryer for families with children, as well as for people who travel long distances during the day or play sports. The electrical device will help out in the off-season and in damp, rainy weather.

This useful device successfully used by pet owners. They place the device in a house, basket or container where a pet sleeping Turning on the dryer for several hours destroys the unpleasant odor and disinfects the “sleeping area.”

Repairing shoe dryers with ultraviolet light can be done with your own hands without much difficulty.

Negative user reviews

The ultraviolet shoe dryer has not only positive reviews from its owners.

• Users note that in some models, instead of ultraviolet lamps Standard LEDs are installed.
• The device can emit a rather unpleasant odor during operation, and this is due to the fact that sweat-soaked shoes heat up. But this does not mean that the product is of poor quality.
• Many inexpensive models Shoe dryers, according to reviews from owners, do not fit into women's and children's shoes.
• A bunch of original models Do not completely dry wet shoes overnight.

Shoe dryer "Timson" antifungal with ultraviolet light

This is a popular, highly effective device that allows you not only to dry shoes very carefully, but also to destroy fungi, bacteria and unpleasant odors. The device has a pronounced deodorizing effect, achieved using miniature ultraviolet lamps built into the dryer.

This ultraviolet shoe dryer has received conflicting user reviews, but its nice design and price from 500 rubles make it quite attractive.

Among the advantages of the device, its owners highlighted the ability to:

• quickly and carefully dry and deodorize shoes;
• perfectly destroys unpleasant odors, fungi and bacteria;
• prevent re-infection with the fungus.

Specifications:

• The power consumption of the device is 10 W.
• Voltage - 220 V.
• Weight - 0.3 kg.
• Air temperature during operation is 60-70 C.
• Package dimensions - 18 x 15 x 3 cm.

Mode of application

The device is placed inside the shoe and plugged into the mains. When exposed to UV light, the Timson UV Shoe Dryer heats up to a specific temperature. Due to ultraviolet radiation and heat, an antibacterial and antifungal effect occurs. Drying time is from 6 to 8 hours.

Safety regulations

The room in which the device will be used must not be damp. Before turning on, you need to inspect the product and make sure its integrity. The device cannot be turned on wet hands. Do not allow children to use the dryer unsupervised.