Building a polycarbonate shower: design, materials, instructions. Summer shower made of polycarbonate: step-by-step instructions for designing Opaque polycarbonate for shower

A shower in the country is an essential attribute of comfort and a great opportunity to freshen up after gardening work. However, not every owner of a house in the middle of nature can boast of a comfortable shower cabin that gives a powerful charge of vivacity and positive energy. However, if this problem is familiar to you firsthand, do not despair - the matter can be fixed. And it will help with this modern material- polycarbonate and helpful information on this topic.

Polycarbonate shower: features

Before we talk about building a polycarbonate shower with your own hands, you need to figure out what kind of material it is and what are its features?

Polycarbonate - polymer plastic, which has a unique structure. Polycarbonate sheets are made from granules through extrusion. This ensures thermoplasticity and the ability to restore their original properties when solidified (no matter how many times they are melted). But this is not the only advantage of the material. The list of advantages is more than impressive.

• ease. Cellular polycrabonate is 6 times lighter than glass, which allows you to create interesting designs, which weigh practically nothing;
• strength. Molecular structure guarantees high impact resistance. The sheets can withstand impressive weight and wind loads;
• sound and heat insulation. Thanks to the air filling the internal voids, sound and thermal insulation characteristics of this synthetic polymer are on high level;
• flexibility. The plasticity of the sheets makes it possible to erect structures of complex geometric shapes;
• wide temperature range. Polycarbonate withstands temperature regime from +120 to -40 degrees.

The list of advantages is completed by ease of installation, low maintenance, and resistance to chemical substances and precipitation, safety.

How to build a polycarbonate shower?

If you want to build a country shower from polycarbonate, then you can realize your dream in two ways. The first is a light summer shower with a small water tank. The second is a more solid structure with a foundation and heating.

The location of the booth is of no small importance. It should be reliably protected from the wind; it’s good if the area is warmed up by the sun’s rays - in the evening of a hot day you can swim in warm, pleasant water. For organization good drain choose a place on a hill.

We are developing a project

The first step towards realizing what you want, namely a polycarbonate shower for a summer house, is a project. Incredibly, even a basic schematic drawing can facilitate the construction of a building.

The shower stall should not be cramped. The best option- when even the tallest member of the family can freely bend over and raise their arms.

It is important!
Most often, the size of the washing room is 1 m2, the height is 2.5 meters. Whereas for a locker room a room of 1 x 0.6 m is sufficient.

The constituent elements of the structure are an individual moment. But the most popular option is a booth, drain and stationary water barrel. By the way, when developing a project, consider the water source and drainage location. Ideally, the drain is located near the drainage pit.

Setting up a shower stall

We mark the territory and install columnar foundation. We drive wooden pillars into the corners of the resulting rectangle. Pre-treat them with a moisture-repellent solution and antiseptic. We assemble the metal frame, fastening the individual parts with long bolts. A dressing is made inside the frame, which will serve as the basis for the floor.

Between load-bearing pillars the slopes are laid, and the logs are placed on them. To ensure unhindered flow of water into the drainage, make the floor with holes - lay the logs at small intervals. The only thing is that taking a shower with such a floor in cool weather will not be entirely pleasant due to the air flow from below.

You can build the floor so that water passes through a special tube into the drainage. Don't forget about rational use water resources— You can water your garden with water after taking a shower.

If you choose a design with a dressing room, then to separate the two spaces you need to build a threshold. This will prevent water from getting into the locker room and getting your clothes wet. Please pay attention Special attention door designs. It should close quite tightly. Most the best option— a door with an overhead seal. The heat will be reliably retained inside the cabin, and the sash will not wedge due to moisture.

Summer shower: we use it not only in summer

If you insulate the cabin, then you can use a polycarbonate summer shower not only in the summer. Expanded polystyrene is used as insulation, which fills the frame compartments. The slabs are covered with a film that protects them from moisture and steam.

If desired, you can decorate the booth with PVC panels, washable wallpaper, linoleum, and oilcloth. The choice depends solely on your preferences and capabilities. The only condition is that the materials must be moisture resistant. A stapler is used for fastening.

It is important!
For construction, it is better to purchase polycarbonate with a thickness of 8-16 mm. The walls are made of matte, and the roof is made of cellular (transparent) polycarbonate.

A water tank is installed on the roof, heated by the sun's rays. Thanks to the sealed cabin, ensuring a constant temperature is not a problem.

Choosing a tank

As already noted, the tank is installed on the roof. Previously, water had to be collected by hand, but today this is not the case. Water is supplied directly from the water supply or pumped. The plumbing valve stops the flow when the tank is filled to capacity.

As for the material and shape, the barrel can be cylindrical, flat, made of either plastic or metal. Plastic flat tanks are especially convenient. They are easy to transport, install and remove. Only a shower stall with such a tank will have to be covered for the winter.

Metal barrels are bulky and heavy and require annual plumbing maintenance. The water in them heats up longer, but also cools down more slowly, which is also important.

How to heat water?

The sun alone is often not enough to effectively warm up the water. To increase the heating rate, a “greenhouse” is installed under the tank. The simple design of polyethylene and slats increases the water temperature by 10 degrees.

An increase in this indicator is also facilitated by a sheet of foil or a mirror installed with north side. Don't forget that warm water is always on top, so don't be lazy to equip the container with a float. Warm water will be used first, and cool water will rise and warm up.

If your plans include using the shower in winter, then drastic measures are necessary. A large boiler or heating element from washing machine. In the first case, the tank should be divided into 2 zones: for cold and hot water.

It is important!
To heat 50 liters it will take an hour and a half and a water heater with a capacity of at least 2 kW.

Follow safety precautions. Insulate the wiring and use the correct size wire.

Making a drain

A waste pit is, of course, convenient, but not practical. The water should go first into a small depression and then into the compost pit. Next to the drain there is a drainage and septic tank. It is prohibited to place them under the shower stall - water will flow into the septic tank and bad smell. Please note that the volume compost pit should be twice the volume of the water tank.

Don't forget about the waterproof layer. This can be a concrete slope, hydroglass insulation, roofing felt, film.

What are the benefits of a polycarbonate shower?

The work is completed, and you are the happy owner of a comfortable shower stall, consisting of only advantages. A polycarbonate shower is not only durable, but also aesthetically pleasing, hygienic, and not afraid of direct sun rays and temperature changes. In a word - a dream.

Execution options can be varied. Choose the one that matches your ideas about the ideal island of coolness and cheerfulness. Watch the presented video and enjoy country life and maximum comfort anytime, anywhere!

Summer shower made of polycrabonate: video

Taking a shower in the summer heat at the dacha is an excellent reason to relax and unwind after work. Do-it-yourself shower cabins are quite popular today among owners of suburban areas. A building created according to a simple design will be functional and attractive. A polycarbonate garden shower with a dressing room can be made with a wooden or metal frame.

Features of the material

Polycarbonate is a material that falls into the category of polymers. Sheets are made from extruded granules. The material is produced in sheets. They can be cellular or solid (monolithic). In the first case, the sheet has voids. Polycarbonate has many unique characteristics, which ensures its popularity.

Among the advantages of polycarbonate are:

• High strength. Thanks to a certain manufacturing technology, polycarbonate has acquired high mechanical strength. This property allows sheets of material to withstand strong gusts of wind. Polycarbonate is also able to withstand snow loads.
• Small mass. Due to its lightness, polycarbonate is quite easy to install. He weights less glass 6 times.
• Flexibility. The use of sheets of material when arranging a shower allows you to create cabins of various shapes.
• Temperature resistance. Polycarbonate can withstand temperatures from -40 to +120 degrees.
• Sound and heat insulation polycarbonate sheets is at a high level. Such properties are ensured by the presence of honeycombs in the thickness of the material.
• Safety. Even if the sheet is subjected to strong blow, small fragments will not work. This is the main advantage of polycarbonate over glass.

In addition, the material is not exposed to various aggressive environments. When installing a shower, the sheets are quite easy to install, as well as process and operate.

Shower device

Before you build a polycarbonate shower for your summer house with your own hands, you should choose the shape of the cabin. This will make the process of cutting the material easier. The simplest option is to install a polycarbonate shower in which a water container will be placed. This option is chosen when you need to cool down in extreme heat. You can also build a major shower, which will be equipped with heated water.

When choosing a place where the shower will be installed, it is worth considering wind load and the presence of shade. It is also worth providing for water drainage. It is better if the polycarbonate country shower is installed on a hill.

Shower design

Design is very important stage construction of a shower in the country. However, it is often missed. It is important to draw up even the simplest drawing, which will subsequently help to do the work correctly.

Shower Design Features:

Shower cabin equipment

When building a country shower, you should take into account several features that will help make it as strong and durable as possible. Also, advice from experienced professionals will ensure quick construction of the structure.

General tips to consider when installing a shower:

• Before building the cabin, you should carefully select a location and mark the area. It is necessary to install poles at the corners of the marked area. Before this, the wood is treated antiseptic. You should also impregnate the cabin elements with a water-repellent composition.
• The next step involves assembly metal frame soul. Cabin parts can be purchased at finished form. They are fastened with long bolts. On bottom part frame, a ceiling is installed, which will become the basis for the floor covering.
• The joists must be installed at such a distance as to ensure the strength of the shower floor. IN floor covering Gaps should be made between the boards. This is necessary for rapid drainage of water. To prevent air from blowing from below on cool days cold air, it’s worth draining into the pipe. So that the water that has been used is not wasted, you can water the beds with it.
• If the shower design takes into account the presence of other compartments, at the entrance to washing department it is worth installing a threshold. This measure will prevent water from entering the locker room.
• The door is an important part of the structure. It should be made from materials such that it does not swell. It is also important to install the seal correctly. This solution will prevent heat leakage from the cabin.

These tips will help make your shower comfortable and durable.

All-season shower

A shower stall in a country house has one feature - it can be modified as much as you like. For example, if it is properly insulated, the shower can be used in autumn period. Expanded polystyrene is often used for insulation. It is mounted between two walls. To prevent moisture from getting on the insulation, it should be covered with a special film.

The inside of the shower can be decorated according to your own taste preferences. Usually PVC panels, as well as oilcloth or linoleum, are mounted on the walls. It is important to choose not only moisture-resistant, but also wear-resistant material.

You can build a polycarbonate shower with your own hands quickly and without much effort. The walls must be colored and the roof transparent.

Selecting a water container

To use the shower for a certain period of time, it is worth installing a tank of the required volume on the roof of the structure. It should be selected taking into account the expected water consumption and the number of people who will receive water procedures. Usually choose metal or plastic tanks. The water in them is heated by heat from the sun.

The tank is usually cylindrical or flat. Last option optimal for a country shower. It is quite easy to install and carry. The only drawback of such a container is the need to cover it in winter.

A metal water container is much more difficult to install. It is also quite difficult to transport. This is due to the large weight of the product. Also, a metal tank requires regular maintenance. The advantage of such a container is that the water heats up faster and holds the temperature better.

Water heating

There are several ways to heat water in a shower tank. Often solar energy enough to prepare warm water for washing several people. However, on cloudy days or in autumn the weather is cold. To make the water warmer, you can build a kind of greenhouse in which the tank will be placed. Thanks to this solution, the temperature of the liquid will rise by 10 degrees. To build a greenhouse, it is enough to stretch polyethylene film without slats.

There are other ways:

• A mirror or foil is used to heat the water. If you place them on the north side, they will reflect the sun's rays onto the water tank.
• For a permanent structure, you will need to install a water heater. A heating element can be used as such a device. In this case, the water tank should be divided into 2 compartments. The second one will be filled cold water. To heat 50 liters of water in 2 hours, you need to use a 2 kW heater.

These methods of heating water are quite simple and effective.

Draining

Draining water in the case of a dacha cooperative is carried out by simply connecting the drain to an existing sewer system. The problem arises when water is drawn from a well. In this case, you will have to think over a drainage equipment scheme in accordance with the characteristics of the site.

As you can see, making polycarbonate showers with your own hands is quite simple. You should decide on the sequence of actions and have before your eyes an accurate drawing of the future building. This will create a durable and reliable shower stall in which you can cool off on a hot summer day.

Also, such designs are highly practical and affordable. Every owner can build a shower for a dacha from polycarbonate sheets personal plot. The materials are quite cheap, and even a beginner can master the construction technology.

In summer, along with beautiful sunny weather and bright colors From plants we also get the need to shower more often than usual. In addition to this, on fresh air Swimming under streams of fresh water is a real pleasure, especially if you live in an apartment and go out into nature. On cold days, when the water does not heat up enough from the sun, you can use a heated shower.

As always, the most ingenious thing is simple. In our case, making a summer shower with your own hands is very simple; however, there are many options for implementing the idea.

Options for a summer shower for a summer residence

Let's start with the materials. It is possible to assemble a frame from any beams, whether it is a metal profile pipe or wooden beams. The walls can be made from a wide range of materials, here are examples: covered with wood, profiled sheets of metal. The best quality and price match if the summer shower is made of polycarbonate, but you can even use opaque oilcloth or tarpaulin stretched over the frame.

OPTION #1

A shower made of bricks or building blocks will be more expensive, but also more reliable. The structure can be made combined and a toilet can be built next to it, as can be seen in the photo. The masonry can be lined with any material available for this purpose.

OPTION #2

To assemble a shower from a profile pipe, welding is most often used, but if you do not have the opportunity to use it, then the beams can be fastened together using holes and bolts. To make the corners rigid, attach a gusset plate or diagonal strip of metal to them. These frames look good covered with tarpaulin or oilcloth as seen in the photo.

Also, corrugated sheeting can be easily attached to the same metal base, which will add reliability to the structure in many ways.

OPTION #3

In construction hypermarkets you can find ready-made showers for outdoor conditions. But there is an opportunity to save money and make a summer shower with your own hands. The general concept has already been described above - the frame is made of corrugated pipe, and the casing is made of polycarbonate. Original examples look at the photos.

Such designs are designed to be used storage tank summer shower, heating will be carried out due to the flat shape of the container.

OPTION #4

One more interesting solution there will be a combination. For example, three walls can be made of hard material, covered with wood or a sheet of metal, or polycarbonate, and the fourth wall can be a screen made of opaque film. Unfortunately, it is not possible to immerse a water tank on such a design, and therefore water can be supplied from the home water supply.

This can simplify the task of providing water for the shower and heating it. Thus, you can make a shower with heated water with your own hands from a home water heater or boiler.

OPTION #5

A shower similar to the previous one can be made by attaching it to the house, or rather to its wall. Cover the wall with a material that will prevent water from penetrating the wall and extend the pipe for the watering can to a height of approximately 230 centimeters. In this case, the frame is not needed at all, but if open option not satisfied, then you can make a screen or curtain that will move along a curved pipe. The floor can be laid with tiles or other comfortable material, after draining.

OPTION #6

If possible, you can lay out shower enclosures from natural stone. This solution will fit perfectly into landscape design the entire area. In the version in the photo, water is supplied from the home water supply, since the presence of a barrel can disrupt the aesthetics of the structure. The stone was laid out without mortar, because it flat shape allows the entire structure to stand securely.

OPTION #7

A budget option for a summer shower is to use materials from tree branches. The frame can be made from thick and even branches, and the walls from bending vines or long branches.

This option is not only quite cheap, but also looks original. Due to the fragility of the frame, water is supplied from the water supply.

Ready-made blocks and prices

Factory-built booths for outdoor shower have quite a variety. First of all, they can be done in various colors, since the colors of polycarbonate and corrugated sheeting may be different. The lining can also be made of synthetic fabrics, for example, film or tarpaulin. You will also find two configurations: with and without a changing room.

On average, prices for cabins packed in an awning are 15 thousand rubles. The package includes a tank with a capacity of 200 liters. If you also want a locker room, then the amount will be approximately 18 thousand or more.

The same options, but with polycarbonate walls and a heated tank, will cost 20 and 25 thousand rubles, respectively.

Of course, these prices are approximate and you can find out the exact figures in your local construction stores.

What do you need to build an outdoor shower with your own hands?

Earlier we already talked about the materials from which a shower stall can be made; the frame is best made from corrugated pipe; the covering has a wide range of materials to choose from: profile flooring, polycarbonate, awning and even oilcloth. When choosing a material, consider the tools that you have for installation.

Also consider the durability of the materials. For example, polycarbonate will retain its properties longer compared to wood, but it reacts poorly to high temperatures and more difficult to assemble.

Preparation plan

1. Drawing and plan. On average, an outdoor shower stall measures 1000*1000*2200 millimeters. These dimensions allow the average person to feel comfortable inside. At the request of the owner, the width and length can be greater, but in no case less. Reducing the parameters will create difficulties in accepting the procedure. And this height is due to the fact that part of the watering can will fall from the ceiling and the tray.

In addition, the drawing will be useful if you decide to include a locker room or other extensions in the building. This calculation will help you avoid additional costs and be completely ready for construction.

1. Choice of material for the frame. It is recommended to use metal: corner or profile pipe. For the frame you will need a corner 50 by 50 millimeters or a corrugated pipe 40 by 20 millimeters. Calculate the footage of the blanks based on the dimensions of the shower: height, perimeter and length. Also consider the dimensions of the tank when designing the dimensions of the frame. The structure must be strong enough to withstand the weight full capacity. In addition, such material will last much longer than any wood. Maintenance is minimal - tint on time to avoid rotting.

If the choice falls on wood, then in order for it to fulfill its role for a long time, it must be treated with special moisture-resistant agents, and then painted or varnished. The part of the tree that will be in the ground must be covered with bitumen or resin.

1. Material for cladding. The list to choose from is very large, but the most practical and popular are brick, corrugated board or polycarbonate. All these types differ in the way they are assembled and how they need to be maintained: for brickwork: you will need a solution, after which it would be useful to cover it with inside varnish; It will be enough to attach the corrugated sheet to the bolts, having previously drilled the holes; polycarbonate is also bolted, but it will require washers.
2. Water source. Equip your shower with a capacity that is sufficient for use by everyone living on the site. On average, one person requires 20-30 liters of water (fortunately, there is a huge selection in stores). Since the weather can bring surprises, heating will not be superfluous. Can equip your tank electrically heated using heating element. If possible, run a water supply from the house to the shower, this will allow you to use water heated by a boiler or gas water heater.
3. Roof. An important part, since while you are swimming, there will be a rather heavy load on top. To avoid injury, the material must be rigid. It is better to use slate or corrugated sheets as a roof. Polycarbonate will simply burst under a heavy load.
4. Drain. It is better to drain the drain approximately two meters from the structure. This will help avoid bad smells. Convenient parameters for a pit would be 500 millimeters in diameter and 1000-1500 in depth. The walls and drainage are filled with concrete using formwork.
5. Tools and consumables. At a minimum you will need: a hammer, a saw and a hacksaw, a grinder, a drill. Welding is good for fastening a metal frame, and you will need electrodes for it. You will also need to acquire nails, bolts and drills with a diameter corresponding to the bolts.

You will also need a watering can, a mixer if hot water supply is provided, adapters, nozzles, pipes and hoses for water supply.

Sequence of operations

To assemble a shower stall you need:

1. According to the drawing in the photo, we weld or assemble parts of the frame using bolts. When assembling, take into account the loss in length.
2. Place the halves vertically and connect using welding seams or the same bolts.
3. We pour the concrete screed and make sure that the legs sink 10-15 centimeters into the screed. Using a level, make sure that the structure is level. For brick building concrete and screed are poured. For drainage, a plastic pipe is used, which must be placed in concrete during the pouring process.
4. After the concrete has hardened, proceed to the cladding and installation of plumbing fixtures, accessories, as well as the final arrangement of the cabin.

Once the frame is assembled, all that remains is to cover it with the selected material. Consider the dimensions of the material based on the dimensions of the “skeleton”. It is better to arrange the drain using a pallet or, at the stage of concrete formation, make a current by placing it there plastic pipe, which will lead to the sewer pit.

The source of water can be either plastic tank on the roof of the cabin, and a pipe from the home water supply.

As you can see, with just a little imagination you can build an outdoor shower, spending a minimum of money and getting maximum aesthetics and quality.

A practical, hygienic, and most importantly inexpensive solution for a shower in the country is to purchase a polycarbonate cabin. A shower made of polycarbonate has long shown itself to be beneficial in work on summer cottages, and is appreciated by consumers. In addition to the attractive price, it has additional advantages:

Heated polycarbonate shower and changing room Price 18,000 rub.

Dimensions 80cmx150cmx220cm

Tank 200 liters

Matte walls cellular polycarbonate(opaque)

Included:

Ball valve with watering can

Hooks for washcloths and clothes

Shelves for accessories - 3 pcs.

Plastic tray with drain

Lock with hook on the outside

Vent

Curtain mount

Additionally, you can install a thermometer and water level - 1000 rubles.

Summer shower is delivered to the buyer fully assembled.

The shower is perfectly protected from the wind, is not visible, can retain heat, and is easy to attach to the tray drain pipe and take it where you need it.

The tank is black in color, so the water in it is well heated by the sun. Original design The watering can allows you to maintain good water pressure, the difference in temperature between the upper and lower layers of water in the tank is minimal.

Thanks to the design, it is possible to install it in a tank heating elements from ARISTON, which are protected from complete drying, which of course extends their service life. The heating element can heat even half the tank; its installation costs 2000 rubles.

High mobility. The summer shower made of polycarbonate has light weight and is installed on a simple base. Dismantling, installation, and assembly at a new location takes no more than 1 day.
. Low operating costs. Polycarbonate is not affected ultraviolet radiation, heat, excess moisture, insects. It does not crack and is impact resistant. Caring for the booth comes down to the need to periodically wash the structure.

Do you want to buy a polycarbonate shower in Moscow or the region? Call 8 495 5007161 or request a call back! The manager will call you back and advise you. We already have an offer for you!