Carpenter 5th category qualification requirements. Profession Carpenter (5th category) in the Unified Tariff Qualification Directory. Characteristics of work, tasks and job responsibilities

5th category

§ 79. Carpenter 5th category

Characteristics of the work. Carrying out the entire range of furniture manufacturing work is not complex design according to drawings and sketches. Cleaning and grinding of coated parts and assemblies, fitting and fastening parts with glue and screws to assemblies and finished products. Preparing and hanging doors in unfinished products. Repair of non-facial parts and assemblies or surfaces prepared for opaque finishing. Repair and restoration of assembled lattice furniture products. Performing all types of work on basic woodworking machines.
Must know: technological process furniture manufacturing; requirements for the surfaces of parts intended for cladding and finishing; methods of furniture repair and restoration; types of carpentry joints; product design; requirements for the quality of furniture and materials; assembly and facing works.
Work examples
1. Passenger and isothermal doors of wooden carriages, ceiling arches of all types of carriages - manufacturing and installation.
2. Cabinet doors, unfinished cabinets - fitting and hanging.
3. Multi-layer skis - manual finishing to specified sizes, processing of the sliding and upper surfaces.
4. Alpine and slalom skis - cleaning the side surfaces with a plane, scrapers and sandpaper to final dimensions.
5. Alpine and slalom skis - determination of dynamic properties on special machine and bringing to the required degree of rigidity and flexibility.
6. Sports bows - finishing to final sizes.
7. Unfinished furniture - complex production of new samples.
8. Counter panels, radiator lined drawers - manufacturing and assembly.
9. Guide strips, shelves and brackets for cabinet furniture in finished form - fitting and installation with glue and screws.
10. Luggage racks for lying - manufacturing with preparation for finishing.

From July 1, 2016, employers are required to apply professional standards, if the requirements for the qualifications that an employee needs to perform a certain job function are established Labor Code, federal laws or other regulatory legal acts (Federal Law of May 2, 2015 No. 122-FZ).
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use

Characteristics of the work.

Carrying out the full range of work on the manufacture of furniture of simple design according to drawings and sketches. Cleaning and grinding of coated parts and assemblies, fitting and fastening parts with glue and screws to assemblies and finished products. Preparing and hanging doors in unfinished products. Repair of non-facial parts and assemblies or surfaces prepared for opaque finishing. Repair and restoration of assembled lattice furniture products. Performing all types of work on basic woodworking machines.

What you should know:

• technological process of furniture manufacturing
• requirements for the surfaces of parts intended for cladding and finishing
• methods of furniture repair and restoration
• types of joinery joints
• product design
• requirements for the quality of furniture and materials
• assembly and facing works.

Work examples

1. Passenger and isothermal doors of wooden carriages, ceiling arches of all types of carriages - manufacturing and installation.
2. Cabinet doors, unfinished cabinets - fitting and hanging.
3. Multi-layer skis - manual finishing to specified dimensions, processing of the sliding and upper surfaces.
4. Alpine and slalom skis - cleaning the side surfaces with a plane, scrapers and sandpaper to final dimensions.
5. Alpine and slalom skis - determining dynamic properties on a special machine and bringing them to the required degree of rigidity and flexibility.
6. Sports bows - finishing to final sizes.
7. Furniture in unfinished form - complex production of new samples.
8. Counter panels, radiator lined drawers - manufacturing and assembly.
9. Guide strips, shelves and brackets for cabinet furniture in finished form - fitting and installation with glue and screws.
10. Luggage racks for lying - manufacturing with preparation for finishing.

Installation of door and window blocks, window sill boards and mounting bars. Installation and fitting of simple mortise and partially mortise devices (door rollers with slats, turntable bells, door and window handles, transverse latches, etc.). Assembly and installation of protective decorative radiator grilles. Assembly and installation of built-in furniture in residential buildings. Wall cladding particle boards. Carpentry work during the installation of grain processing equipment. Manufacturing of platforms and floorings for straight pipes, gravity flow parts, hangers and brackets for fastening grain processing equipment during its installation. 5th category. Characteristics of the work. Carpentry work in production civil works. Manufacturing and installation of handrail roundings. Manufacturing, assembly and installation of semi-circular bindings and boxes.

Job description of a construction carpenter of the 5th category

Attention

Installation and fitting of simple mortise and partially mortise devices (door rollers with slats, turntable bells, door and window handles, transverse latches, etc.). Assembly and installation of protective decorative radiator grilles.

Assembly and installation of built-in furniture in residential buildings. Wall cladding with particle boards. Carpentry work during the installation of grain processing equipment.
Manufacturing of platforms and floorings for straight pipes, gravity flow parts, hangers and brackets for fastening grain processing equipment during its installation. 5th category. Carpentry work during general construction works.
Manufacturing and installation of handrail roundings. Manufacturing, assembly and installation of semi-circular bindings and boxes. Fitting and hanging with insertion of window sash hinges and door leaves.

Error 404 page does not exist

Double doors made of valuable species wood with inlay, polished - manufacturing, fitting, installation. 3. Cabinet doors, unfinished cabinets - fitting and hanging.

4.

Info

Door leaves and window frames for ships with curved outlines and joints in “different ways” - manufacturing, fitting, installation. 5. Ceiling arches of all types of carriages, passenger and isothermal doors of wooden carriages - manufacturing and installation.

6. Handrail roundings - manufacturing and installation. 7. Locks of the “Abloy” type, carriage type - inset. 8. Coverings of complex configurations made of asbestos-silite slabs lined with laminated plastic, frail and service premises - cutting and fitting. 9. Cornices with capitals, rosettes and lampshades made of veneer or valuable wood - manufacturing, fitting, installation. 10.
RIGHTS OF AN EMPLOYEE An employee has the right to: - provide him with work stipulated by the employment contract; — workplace, corresponding to state regulatory requirements labor protection and conditions provided for collective agreement; — complete reliable information about working conditions and labor protection requirements in the workplace; — vocational training, retraining and advanced training in the manner established by the Labor Code of the Russian Federation and other federal laws; — obtaining materials and documents related to their activities; — interaction with other departments of the Employer to resolve operational issues of its professional activity. 4. RESPONSIBILITY The employee is responsible for: 4.1.

Failure to fulfill your functional responsibilities. 4.2. Inaccurate information about the status of the work.

Job description of a construction carpenter of the 2nd (3, 4, 5, 6) category

Important

Semi-circular bindings and boxes - production, assembly and installation. 25. Complex mortise and partially mortise devices (through latches, transom devices, locks with a rotary handle, automatic, etc.) - installation with a local fit.

26. Complex ship furniture, equipment and finishing parts for ship premises made of valuable wood, polished and varnished - installation and fastening. 27. Fittings - installation in lacquered and polished furniture.

28. Shields with decorative laminated plastics - covering front rooms. 3. RESPONSIBILITY The carpenter is responsible: 3.1. For failure to perform (improper performance) of one’s work, within the limits determined by the current labor legislation The Republic of Belarus. 3.2.
Methods for making joints and assembling joinery elements; sealing methods individual places wood; methods of manufacturing, assembly, repair and installation of joinery products. 5th category. Properties of hardwood and methods of its processing; methods of manufacturing, fitting and hanging complex joinery products. 6th category.

Methods for manufacturing, installing and repairing complex carpentry; properties of hard and valuable wood. 1.6. During the period of temporary absence of the Employee, his duties are assigned to (position).

2. FUNCTIONAL RESPONSIBILITIES OF THE EMPLOYEE 2nd category. Selection and sorting of lumber. Preparing bars for joinery products to size by hand with a planer, longitudinal and transverse sawing. Cooking wood glue. 3rd category. Wood processing with electrified tools and manually. Manufacturing and installation of simple carpentry.

Working instructions for a carpenter (5th category)

In his activities, a construction carpenter of the 5th category is guided by: - ​​the legislation of the Russian Federation, - the Charter (regulations) of the organization, - orders and instructions of the organization ( general director, director, manager) - this job description, - the internal labor regulations of the organization, 6. A construction carpenter of the 5th category reports directly (to a worker with a higher qualification, the production manager (site, workshop) and the director of the organization).

7. During the absence of a Construction Joiner of the 5th category (business trip, vacation, illness, etc.), his duties are performed by a person appointed to the organization (manager position) upon nomination (position) in in the prescribed manner, which acquires the corresponding rights, obligations and is responsible for the fulfillment of the duties assigned to it. II.

Job description of a 5th grade carpenter

Manufacturing and installation of round and shaped pipes, boxes of gravity pipeline parts, troughs for augers, tray drain and receiving tables, frames for technological grain processing equipment. 6th category. Characteristics of the work. Carpentry work during general construction works. Manufacturing, installation and restoration repair of complex shaped and patterned handrails, baseboards, platbands, balusters, cornices and other products made of hard and valuable wood. Installation of artistic wood panels on walls without carvings. Installation of wooden spiral staircases. Carpentry work during the installation of grain processing equipment.

Furniture made of valuable wood, polished and varnished (buffets, mirror cabinets, bureau, beds, desks and charts), - manufacturing, assembly, fitting, installation, fastening. 17. Installation locations according to drawings and sketches of furniture made of hard and valuable wood - complex markings.

18. Window sashes and door panels - fitting and hanging with insertion of hinges. 19. Counter panels, radiator lined drawers - manufacturing and assembly. 20. Panels, mirrors in the wardroom, dining room - assembly on site with a selection of layouts, cloth stickers, fastening. 21. Guide strips, shelves and brackets for cabinet furniture in finished form - adjustment and installation with glue and screws. 22.

Luggage racks for lying - manufactured with adjustment for finishing. 23. Curved toilet shelves, holders for glasses and decanters made of plexiglass - manufacturing.

24.
I. General provisions 1. A construction carpenter of the 5th category belongs to the category of workers. 2. A person who has: (education and experience requirements) is accepted as a construction carpenter of the 5th category. 3.

A construction carpenter of the 5th category is hired and dismissed by the organization upon nomination (director, manager) (position). 4. A construction carpenter of the 5th category must know: a) special (professional) knowledge: - properties of hardwood and methods of its processing; — methods of manufacturing, fitting and hanging complex joinery products.

— instructions for use, operation, storage of devices, tools, measuring instruments and others technical means used in their work. — sketches and drawings directly used in the process of work. — requirements for the quality of work in related construction processes.

Job description for construction carpenter 5th category

Manufacturing and installation of round and shaped pipes, boxes of gravity pipeline parts, troughs for augers, tray drain and receiving tables, frames for technological grain processing equipment. — Carrying out the work of lower-skilled workers in a given profession. — Management of workers of lower ranks of the same profession. b) General Responsibilities employee of the organization: - Compliance with the internal labor regulations and other local regulations of the organization, internal rules and regulations of labor protection, safety precautions, industrial sanitation and fire protection. — Execution within employment contract orders of the employees to whom it was repaired in accordance with these instructions.

This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Instructions for the position " Carpenter-machine operator 5th category", presented on the website, meets the requirements of the document - "DIRECTORY qualification characteristics workers' professions. Issue 64. Construction, installation and repair work. (Taking into account the additions approved by: order State Committee on construction and architecture N 25 of 08/08/2002, N 218 of 12/22/2003, N 149 of 08/29/2003, letter of the State Committee for Construction and Architecture N 8/7-1216 of 12/15/2004. , by order of the Ministry of Construction, Architecture and Housing and Communal Services N 9 of 12/02/2005, N 163 of 05/10/2006 N 399 of 12/05/2006, by order of the Ministry of Regional Development, Construction and Housing and Communal Services of Ukraine N 558, 12/28/2010)", which was approved by order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on 10/13/1999 N 249. Agreed by the Ministry of Labor and social policy Ukraine. Entered into force on January 1, 2000. The document status is "valid".

Qualification requirements
Vocational and technical education. Advanced training and work experience as a 4th category carpenter-machine operator - at least 1 year.

Knows and applies in practice: properties of hard and valuable wood, methods and rules for its processing; methods of manufacturing, assembly, fitting, hanging, installation of complex carpentry, furniture, built-in furniture; methods and rules for making connections, assembling elements of carpentry, furniture and built-in furniture of complex design; rules for observing the sequence of work in accordance with technology; requirements for the quality of work; designs, operating rules, adjustment of woodworking machines; rules for preparing for work cutting tool; wood cutting theory; rules for reading technical drawings; technological schemes cutting materials; device and rules for using instrumentation and tools; standards for raw materials and finished products; causes of defects and ways to eliminate them; fire and electrical safety rules; rules and regulations on labor protection when performing work.

Characteristics of work, tasks and job responsibilities
Performs complex carpentry work, wood processing work manually, with mechanical and electrical tools, on woodworking machines. Manufactures and installs complex carpentry, furniture, and built-in furniture.

Work examples
Production on woodworking machines and installation of rounded handrails, semi-circular frames and frames, their assembly and installation. Manufacturing complex parts, furniture elements and built-in furniture using manual, mechanized and electric tool, on woodworking machines. Drilling holes on multi-spindle drilling and additive machines with mechanical feed of parts. Planing wood veneer various breeds on veneer planing machines. Copy turning, other complex turning work based on samples or drawings. Milling recesses and grooves for fittings on facade surfaces. Cutting bent-glued blanks on single-spindle and multi-spindle machines. Cutting openings and windows in cladding panels, wood-laminated materials using circular saws and press dies. Joining of edges, cross cutting of peeled, sliced ​​veneer. Fitting and hanging with cutting of curtains window frames, door panels, complex parts, furniture elements, built-in furniture. Marking from sketches and making templates for plastering works, forms for stucco work. Installations that accommodate complex mortise and partially mortise accessories (through bolts, transom accessories, automatic locks, with a rotary handle, etc.). Manufacturing of architectural parts on lathes, milling machines. Manufacturing of auxiliary devices, templates according to drawings. Setting up woodworking machines and participating in their scheduled maintenance.

§ 374. Construction carpenter 2nd category

Characteristics of work

• Selection and sorting of lumber.
• Preparing bars for joinery products to size by hand with a planer, longitudinal and transverse sawing.
• Cooking wood glue.

Must know:

• basic properties of wood;
• rules for selection and sorting of lumber;
• rules for using carpentry tools;
• methods for preparing wood glue.

§ 375. Construction carpenter 3rd category

Characteristics of work

• Wood processing with electrified tools and manually.
• Manufacturing and installation of simple carpentry.
• Manual production and installation of straight joiner rods, straight handrails of a simple profile.
• Manufacturing straight-line carpentry blanks using power tools or manually.
• Cleaning parts after machining.
• Installation of overhead window and door fixtures with local fit.
• Staging sealing cord in paired bindings.
• Cutting out branches and tars.

Must know:

• main species and defects of wood;
• methods of manufacturing carpentry products manually and using mechanized tools;
• rules for handling electrified tools.

§ 376. Construction carpenter 4th category

Characteristics of work

• Production of parts and assembly of door leaves and window frames of all types of rectilinear shapes.
• Assembly and repair of straight transoms, window sashes, blind frames for civil and industrial buildings.
• Fitting blind frames and transoms.
• Installation of paneled partitions.
• Installation of door and window blocks, window sill boards and mounting bars.
• Installation and fitting of simple mortise and partially mortise devices (door rollers with slats, turntable bells, door and window handles, transverse latches, etc.).
• Assembly and installation of protective decorative radiator grilles.
• Assembly and installation of built-in furniture in residential buildings.
• Wall cladding with particle boards.
• Manufacturing of platforms and floorings for straight pipes, gravity flow parts, hangers and brackets for fastening grain processing equipment during its installation.

Must know:

• methods for making joints and assembling joinery elements;
• methods of sealing individual areas of wood;
• methods of manufacturing, assembly, repair and installation of joinery products.

§ 377. Construction carpenter 5th category

Characteristics of work

• Carpentry work during general construction works.
• Manufacturing and installation of handrail roundings.
• Manufacturing, assembly and installation of semi-circular bindings and boxes.
• Fitting and hanging with insertion of hinges of window frames and door panels.
• Marking from sketches and making templates for plastering and molds for stucco work.
• Installation and fitting into place of complex mortise and partially mortise devices (through bolts, transom devices, locks with a rotary handle and automatic, etc.).
• Carpentry work during the installation of grain processing equipment.
• Manufacturing and installation of round and shaped pipes, boxes of gravity pipeline parts, troughs for augers, tray drain and receiving tables, frames for technological grain processing equipment.

Must know:

• properties of hardwood and methods of its processing;
• methods of manufacturing, fitting and hanging complex joinery products.

§ 378. Construction carpenter 6th category

Characteristics of work

• Carpentry work during general construction works.
• Manufacturing, installation and restoration repair of complex shaped and patterned handrails, baseboards, platbands, balusters, cornices and other products made of hard and valuable wood.
• Installing artistic wood panels on walls without carvings.
• Installation of wooden spiral staircases.
• Carpentry work during the installation of grain processing equipment.
• Manufacturing and installation of heads, shoes and pipes of elevators, over-roll boxes, cones under rolling, aspiration boxes and channels for rolling, collectors and drags, screw descents, branch pipes, wooden structures for suspension of heavy grain processing equipment.

Must know:

• methods for manufacturing, installing and repairing complex carpentry;
• properties of hard and valuable wood.