Stylish DIY frame made of wood. Wooden photo frame: make it yourself with photo instructions Making your own frames from wood

Photographs are a repository of a variety of moments. They preserve life itself. That is why always, even in the era digital technologies, people put on the table, place on the walls photos related to a particular event or person. Spectacular and unusual frames for photos are not cheap, but everyone wants to decorate their home with a noticeable decorative element. Therefore, the decor of photo frames has always been, is and will be in demand. Decorating frames with your own hands is possible for almost everyone; it is exciting and makes you feel like a real creator.

Paper photo frames

How many things can you make from paper? Countless products, interior items, crafts and much, much more. The Internet is teeming with ideas, each better than the next.

Photo frame using origami technique

Necessary materials:
- colored single-sided paper;
- scissors;
- a simple pencil;
- PVA glue;
-ruler.

Base - 4 squares 15x15 cm.

Fold the square diagonally with the colored side facing inward.

Expand. Place the square face up and fold the bottom side of the square towards the fold line as shown in the photo.

Turn the workpiece over and bend the bottom corner.

Turn the workpiece over to the front side and bend along the fold line.

Turn over. AND bottom part fold along the fold line.

Place the side in the pocket. The module is ready.

Reverse side of the module.

To assemble a photo frame we need 4 modules.

Apply glue to sharp corner and insert it into the corner of the 2nd module, as shown in the photo.

Then the 3rd and 4th module.

The photo frame is ready.

Reverse side of the photo frame.

Insert any photo or funny picture.

Volumetric photo frame

The good thing about this frame is that all you need to create it is a piece of paper and scissors. What’s also great is that the frame is voluminous.

The size of the frame depends on the size of the sheet of paper. This means that you can make a frame of any format. And use it to post a photo or collage, as well as to decorate handmade crafts.

Print the frame template

If you don't have the opportunity to make a printout, then make a template for a homemade paper frame with your own hands. To do this, you need to place a photograph in the center of the sheet and trace its outline (or simply draw a rectangle of the appropriate size in the center of the paper). Then set aside strips of different sizes (alternating strips 1.5 cm and 1 cm wide). Make indentations at the top and bottom as shown in the template.

Next, we bend the drawn strips along the ruler. We begin to wrap the sides of the future paper photo frame. We do this carefully so as not to crush the craft.

The short sides are folded first, followed by the long ones. We need to insert the corners of the long sides of the paper frame into the corners of its short sides to secure the structure tightly.

If the paper is very thick and glossy, it makes sense to insert the photo first, and only then fold the sides. This way it will “sit” tighter. If you are worried about the design, you can drop a little glue or use double-sided tape.

Paper frame using quilling technique

Option 1:

For work you need to prepare tools and materials:

• photo frame from light wood.
• acrylic paint white
• sponge or sponge for applying paint
• quilling paper white and blue - strips 3 mm wide
• tweezers for quilling
• quilling awl
• scissors
• PVA glue
• glue Moment
• acrylic contours - imitation pearls - white and blue colors

Let's start by preparing the frame. It is better to take a frame made of light wood. Then you don’t need to prime the frame first, and White paint fits perfectly on the tree. If the frame is made of dark wood, then you will need to apply primer first to disguise dark color tree.
Remove the glass from the frame. Using a sponge, apply paint to the frame on all sides using a blotting motion. It is better to apply 2-3 layers. And leave the frame until completely dry(after 1.5 hours the frame will be completely dry).






While the frame is drying, we will prepare the decorative elements with which the frame will later be decorated. Let me immediately note that when creating such elements there are no uniform schemes or rules. All this is purely a flight of fancy and mastery of working with paper.
Take 8 strips white and glue them together with a ladder, that is, each strip is glued to the previous one with its tip, while the tip of the strip is located slightly lower.



Using an awl, we twist the glued strips, while wrapping the strip so that the gluing points are inside.

Unravel the twisted roll. This is such a beautiful curl.


Now we glue all the strips together in one place, just below the curl.


When the joint is dry, we give the strips a wave shape and glue the strips together again.


We cut off the remaining free ends so that each strip is longer than the other.


And twist each end.


Please note that this is a large complex element. Now we glue this element to the already dried frame. The element can be bent to fit the frame.






In the decor of this frame, I wanted to play with 2 colors - white and blue, as well as a smooth transition from one color to another, so let's start creating central element, but already blue color.
We glue 6 strips of paper together with a ladder and roll them into a roll.

Glue the strips together in one place. We cut off the ends in the same way as white element: Each strip is longer than the previous one.


And we wind each strip onto a quilling awl.


Now we unwind the previously twisted rollers. This is easy to do by running an awl over them.


Now we glue this element to the frame. It is better to use instant glue for this. At the same time, we glue this element in the upper left corner, as in the photo.

We straighten the curls so that they lie in the same plane and glue them.

In order to make a smooth transition from one color to another, we glue strips of white and blue, 4 of each color. And twist it into a curl.



Glue it to the left side of the frame.


To fill the voids, we make and glue curls to the frame. Left - white, right - blue.




Add another blue curl, but this time larger.


Now let's go back to the bottom of the frame. For decoration we twist a lot of small curls. To do this, cut the strip into pieces of arbitrary size and twist the ends.


We glue the elements so as to fill the entire space.




I always encourage you not to be afraid to combine various techniques, and in this case I used acrylic contours for painting. Using an outline with imitation pearls of a natural color, we place a series of dots. The size of the dots increases, from smaller to larger.


In the upper part of the frame, where the swirls are blue, draw dots with a contour of a suitable shade.


I drew wavy lines so that one color of the dots smoothly transitions into another.



And here is the result.


Paste favorite photo frame, and let it please the eye for many years.

Option 2:

To make a quilling photo frame you will need the following ingredients:

Thick paper for background (minimum 300g/m2)
- less dense paper for flowers (from 120 to 160 grams/m2 - denser is not advisable, because strips of this size will not curl so obediently and smoothly) in two colors. In my case it is white, which will stand out, and more delicate shade a background color that will allow our flowers to blend better with the main color and help highlight the details.
- a paper knife and a steel ruler for cutting strips. Cutting with scissors is a tedious task.
- PVA glue
- a toothpick or other device for twisting rolls

We cut strips 30 cm long and 5 mm wide, and estimate the quantity based on the plot we have planned. There are many clever ways to cut quickly, such as cutting multiple layers of paper at once, but at this density (120 to 160) it is quite difficult. Therefore, in order not to be too tricky for a long time, I fastened the paper for the flowers with a notebook sheet in a cage and, Whack-Whack-Whack, moving the ruler across the cells, but first we’ll make a frame, and the best part will be for later.

We mark our densest leaf. I recommend that you first draw up a detailed diagram on paper so as not to cut off too much and take into account all the dimensions. I was counting on a 13x18 photo, based on these dimensions we choose the width of the frame, mine on the left and bottom is a little wider. Having finished marking, we cut out a window for the photo, which should be slightly smaller than the photo itself.

Now let's take care of the “pocket” into which the photo will be inserted. Photo paper is very thick and has a significant thickness, so to prevent the frame from deforming when a photo is inserted into it, we will give the pocket a little width. Paste with reverse side a narrow strip of thick paper, and now you can glue the “pocket” itself, which will prevent our photo from falling out of the frame.

The base is ready

Let's move on to the flowers. So, to make a petal we need a strip of paper, which, using a split toothpick (or a more noble tool), is rolled into a tight roll. The roll, in turn, is unrolled to a certain diameter, then the end of the strip is fixed with PVA glue and the roll is given required form using your fingers. We wash our hands so that there are no offensive dark spots at work later. The sections of the strips get dirty especially easily; for white paper this is simply a disaster; it can easily give it a very poor appearance.

To make identical petals, it is convenient to use a template to unwind the rolls to the same diameter.

I also really like flowers of this shape.

And leaves, of course

In general, we twist as much as we like, don’t forget to create flora of various sizes.
When the main elements are ready, we place them on the frame and glue them. This is not the final version, but I think the meaning is clear.

Now we add details until the composition seems complete enough.

The last step remains - attach a stand to the back for stability.

The frame is ready!

Photo frame made of paper tubes

Option 1:

We will need:

• old newspapers or magazines;
• base frame;
• glue;
• wooden skewer;
• scissors.

Before making a frame from newspaper, you need to prepare several dozen tubes. To do this, divide printed edition onto separate sheets, and then, starting from the corner, twist each sheet onto a wooden skewer.

To secure the tube, coat the corner of the sheet with a small amount of glue. Wait until it dries and carefully remove the skewer. Make several dozen more paper tubes in the same way. In our example, about 55 such tubes will be required.

Check if the tubes are long enough to cover the frame. If they turn out shorter than required, glue two tubes together by inserting one into the other. Now you can start creating a frame from newspaper tubes. Apply to base frame thin layer glue. You can use a primer if the base color doesn't suit you.

Glue together four tubes into a rectangular frame, the size of which corresponds to the photograph or painting you plan to display. Carefully remove the ends of the tubes protruding beyond the edges of the frame, and the craft is ready!

Option 2:

We cut strips along the entire length of the sheet, i.e. 30 cm. Strip width 5 cm.

It is better to use glue that is not liquid. And you will need wooden stick. We place the stick so that the ends of the strips remain empty, mine are 5 cm. Twisting a tube in this way is not as easy as it seemed to me at first, and I came up with my own method, which I share with you.

First step. First we make a side in the shape of a stick. This makes it easier to glue it on later. If you don’t have such sticks on hand, you can replace them with paper tubes. Which are twisted for weaving. For us, the main goal is a frame made of straight tubes (no twists).

Step 2. Rub the stick with pencil glue on all sides and glue the side to it. Let it sit (the stick and paper should stick together), while we glue the next one. And so we made the preparations and proceed to the next step.

Step 3. We make the first turn of the stick, pressing firmly and straightening the ends of the tube. Then don’t try to twist it too tightly, you’ll only wrinkle the paper. You just need to give it the shape of a tube. Then, on the floor on a mat, start rolling the sausage (as with dough), at first lightly, then you will feel that it is curling up. Then you press firmly and roll until you feel the stick. Try to ensure that the ends where there is no stick are the same thickness as the center. And also, if you roll a tube and it doesn’t curl, it means the stick has come unglued.

Step 4. Secure the tube with clothespins. Clothespins have two sizes of recesses, we fix them in the second - smaller one. Possible for three clothespins.

Step 5. First glue between the clothespins, then remove them and finish gluing where the clothespins were. I carefully glued it with PVA glue with a needle. The tube is ready.

This way I glued two tubes together. The tubes, if glued this way, will not move. They will be even. I applied the glue with a toothpick between the tubes directly from the top. And also, don’t forget to lay all the tubes with the seam facing up - this will be the wrong side.

My clothespin only fits two tubes into a large recess.

These are the stripes we got for the frame. One photo is missing of how I glued 4 tubes together. It’s already simple, cut out a strip no wider than 4 tubes and glue it on it.

I needed a frame for this picture. I laid it out as I saw fit and measured the internal size.

I made a mark along the ruler from corner to corner and cut with a very sharp knife.

I cut out a corner and glued it onto it.

I constantly measured the frame so that it wouldn’t turn out crooked.

And here is the corner. It worked!

Bamboo paper photo frame

For a bamboo frame you need thin, dense tubes of foil or cling film. The tubes may differ slightly in diameter - this is bamboo, and in nature it can be different.

I cut the tubes, but it seems to me that whole ones are also possible; for example, I saved money because I didn’t have many tubes and I like it better when the flat side is near the frame.

First fitting. The stretcher was glued together from 2 corrugated cardboard sheets, the front side was covered with velvet adhesive film, and the back side was covered with wallpaper. On top crossbar It can be seen that the sizes of the tubes are different.

Each prepared “stick” was pasted over with pieces of some kind of wrapping paper (found in bins). A jute rope was glued under the paper in several places (future jumpers - bamboo rings). Where there was a difference between the diameters of the tubes, I also wound a thread, having previously glued the tubes by overlapping the larger smaller.

Cover the glue-dried tubes with brown putty (I covered everything well with my finger, paying attention to the jumpers).

When the tubes were dry, I carefully treated them with fine sandpaper. In the places where the jumpers were, I used a brush with brown paint and, without waiting for it to dry, I seemed to stretch the paint away from the jumpers, thereby making the color transition smooth and natural.

Cardboard photo frames

Option 1:

Creating beautiful frames without the appropriate equipment is problematic. So collect minimum set tools. It should include:

• large scissors;
• stationery knife;
• PVA glue;
• a simple pencil;
• scotch;
• small scissors;
• fine-grained sandpaper;
• ruler.

Note: It is advisable to get a cutting mat; it makes it much easier to mark out the details of the future frame.

If you are not satisfied with the color of the cardboard for the frame, purchase a can of spray paint. To decorate photo frames, use shells, pebbles, glass, rhinestones, beads, etc.

In addition to the basic tools, the following will be useful: paint brush with soft bristles, spray bottle, water and tongs. They will be needed to prepare the material for use.

Preparation of material

The best material to make your own photo frames is cardboard. Why? It is cheap and easy to process. Every home has at least one cardboard box and glue with scissors.

In its raw form, cardboard is of little use for making a photo frame. Its preparation comes down to the following - separate the top layer so that the corrugated part appears.

Sometimes this is not easy to achieve, because different types Cardboards are made with different amounts of glue and they have different thicknesses.

How to quickly peel off the top layer of cardboard:

Wet the part of the paper that needs to be removed. Distribute the moisture evenly over the surface using a brush. Wait 2-3 minutes for it to soak. Using your fingers or a knife, pry up the edge of the layer and try to remove as large a piece as possible. Cut off the rest. Clean off dried glue with sandpaper.

The method described above is applicable to large pieces of cardboard; for small ones, sometimes it is enough to rub the top layer.

Note: Spray the water more carefully. If you overdo it, the cardboard will become soggy. At best, you will have to wait until it dries. At worst, start the work all over again.

Instructions

First you need to decide what kind of photo the frame is being created for. It is not the content that is important, but the size and orientation of the card (vertical or horizontal). Based on this, proceed:

Step #1. Cut out the base.

Cut out the base of the frame from a large piece of cardboard. Its dimensions should be at least twice the size of the photo. Next you will understand why. Using a ruler and pencil, mark the contours of the future part. Then cut it out with scissors.

Step #2. Making a compartment for photography.

In the middle of the base, draw a rectangle slightly smaller than the photo for which the frame is being made. Gently trace along the contour stationery knife and cut out the window.

Cut out a rectangle that will cover the photo hole on the back of the frame. Glue the door with tape on one side.

Step #3. We complete the preparation.

Make several cardboard strips of different lengths. Stick four of them around the photo compartment. Use the rest to create the structure of the front part. For clarity, look at the figure below.

To make the frame fit more tightly to the wall, glue triangles at the corners of the back. They compensate for the thickness of the door and allow the photo frame to hang more evenly.

Making triangles couldn't be easier. Cut one out using a pencil and then use it as a stencil.

Step #4. Decor.

Everything we did before had little to do with creativity. It's time to turn on your imagination to the fullest. Here is one of the options for designing a frame, but this is just an example, you can come up with your own version.

So, to decorate the photo frame we use the same cardboard. Take the prepared material with bare corrugation and cut it into ribbons. Divide several of them into elements as shown in the figure below.

Next, glue the decorative parts onto the front of the frame. The result is an asymmetrical relief pattern. This photo frame is unique and, with the proper approach to manufacturing, will outperform its designer counterparts.

Additional photo frame design options are:

Traditional photographs have an energy that they lack digital images. Enclose them in frames made with my own hands. This will make the captured moments of life brighter and the design of the room unique.

Option 2:

You will need: corrugated cardboard, self-adhesive paper, scissors, ruler, pencil, colored paper napkins or corrugated paper, office stapler, thermal gun, photography.

From cardboard we cut out 2 rectangles 16X20, one 5X15. On one of the rectangles in the center we draw another rectangle, retreating 3 cm from the edge, the inner rectangle is 10X14.

We place our rectangle on self-adhesive paper, trace it with a pencil and add 2-3 cm, as shown in the figure, cut out and carefully glue two large rectangles.

We cut a small rectangle (hereinafter referred to as the holder) from one edge diagonally as in the picture and also paste it over.

To make flowers from napkins, we will need 9 napkins, from which we will get 18 flowers.
Cut the napkin into two parts exactly in the middle.

Cut out a circle with a diameter of 5 cm from cardboard. Fold the cut napkin in half and fasten it with a stapler. Let's circle our circle.

Next we cut out and shape the flowers.

Using a heat gun, glue the holder onto the entire rectangle from the glued side.

On the other side we paste a photo.

We assemble the frame by gluing both parts and flowers.

Wooden photo frames

As you know, wood is an ecological, expensive and exquisite material.

Wood in any interior emphasizes aristocracy. By placing a wooden product in our home, we get a little closer to nature.

Step 1: Materials

You will need a couple of pallet boards for the project, although any other wood will do. In my case, the slightly weathered look of the pallet wood goes perfectly with the equally time-worn sign, so I used that. If you want to achieve a more polished appearance, then pallets can also be used, you just need to sand the boards thoroughly and, for example, coat them with varnish or paint.

For back wall The frame will need something flat, such as MDF or hardboard. Thin plywood or thick cardboard will also work. The only requirement for the back wall is dimensions. The dimensions should be slightly more sizes visible area of ​​the frame, and less than its edges. In other words, it can be the size of the frame, but a couple of centimeters smaller on each edge.

Step 2: Attach the object of adoration

Our frame is not quite ordinary; it will not be possible to insert glass into it, behind which the photo is placed. Since there is no glass, you will have to glue it down to prevent the photo from falling out. I used a car sign instead of a photo and glued it to the MDF (back wall) with hot glue.

Glue can be any kind, but with hot glue it goes faster.

Step 3: Cut out the frame

Now we need a ruler, and basic skills in working with a hacksaw (which all men have by default from birth). All you need to do is measure the length of the inner edge of the frame on the board, and draw 45-degree angles, and then cut the board along them.

Step 4: Putting all the pieces together

I just hot glued each side of the frame to the back panel and that was it. As you can see, there are small gaps between the boards, and I like this look even more.

Step 5: Glue it a little more

Along the edges of the back wall I applied another thin layer of glue for additional adhesion.

Step 6: Frame Mounting Hole

The hole for fastening is made from the back side, and the main thing here is not to make it through.

Step 7: Finishing Touches

Frame made of tree branches

We will need:

• thin branches;
• cardboard;
• glue gun or superglue;
• moss (real or decorative);
• decorative flowers;
• acrylic paints;
• craft varnish (optional).

To make such a frame, you need to take a responsible approach to the choice of material. Try to choose branches of one or two sizes (thicker and thinner). It is better not to take twigs with slippery bark, as over time they will begin to dry out, which will make them not very beautiful. And it’s more difficult to work with slippery bark. Dry branches collected from the ground rather than plucked from trees are best.

The blank for the photo frame needs to be cut out of thick cardboard (and several layers glued together) or plywood. Next, paint the future frame brown or any other color. The main thing is not to leave it white, as it will not look very nice.

Free the branches from excess bark and straighten them. Cut to frame size. Place four thicker branches as the first layer and glue them.

Next, lay out another layer of branches. Increase their mass on the photo frame gradually, gluing each one separately. If you are using superglue, the reliability of which you are not too sure of, fasten the branches together with wire. It is advisable to choose wire of an inconspicuous color or completely cover the finished photo frame with spray paint so that the fastenings are not noticeable.

Glue moss around the edges of the frame. If you don't have anything similar, add leaves or pine cones that can be pre-painted.

Add decorative flowers or beads, painting them with acrylic to decorate them with berries. At the end, the craft can be sealed with non-toxic wood varnish.

Photo frame made from sushi sticks

Option 1:

Making a layout

We fold the sticks in the form of a lattice. To do this, we place two sticks parallel to each other at a distance of approximately 20 cm, then we place 5 sticks perpendicularly on them at a distance of 2.5-3 cm.

Preparing the components

We fasten all parts of the layout with threads. Then we repeat the same thing again. We should get 2 grids, the same as in the picture.

Connecting the components

We put the lattices together and tie them together.

The photo frame is ready!

We make a loop so that our frame can hang. Then we glue the photo using double-sided tape. That's all, the product can be placed on the wall!

Option 2:

Frame made of wood chips

Wood chips can be purchased at construction stores and home improvement stores.

This frame will be a great gift. And you can use it not only for a mirror.

This frame design would be appropriate for photos and watches, and it is possible to place some kind of frame in the center. beautiful composition from flowers or glass.

Photo frames from improvised means

Pasted decor

You can glue a lot to a frame, everything is determined by the taste and imagination of the master.

Buttons

Photo frames decorated with buttons will look original, especially if you choose them in the same color. However, this is not a mandatory condition. The desired color uniformity can be achieved using acrylic paint. For example, buttons coated with gold paint will transform beyond recognition an old photo frame that by a lucky chance did not end up in the trash bin.

Beads, rhinestones

Over time, such things accumulate in abundance in every woman. All this can become a unique collection of materials for decorating an elegant frame with your favorite photo with your own hands; it’s worth gluing them onto a pre-planned drawing or ornament. Tip: you can use whole brooches, beads, beads, pearls, interesting pieces of glass, fragments of broken dishes, mosaic elements.

Natural materials

Tastefully executed frame decor in natural style always attracts attention. After all, we are all children of nature.

Photo frames made of coffee beans, shells

Coffee beans

Coffee beans are useful not only for making an invigorating drink, they also turn out to be excellent material for decorating photo frames with your own hands: they have a wonderful smell, original texture, noble color, they do not deteriorate. The work won’t take much time either: it’s not so difficult to use a glue gun or PVA glue to tightly line a standard photo frame with coffee beans, which in its new guise is guaranteed to become a leading interior accessory.

To make your handmade frame smell fragrant, buy star anise and star anise and find a place for them in the overall decor.

Shells

This is one of the rewarding materials for decorating a photographic frame with your own hands. Need shells for decoration various shapes and magnitude. In addition to shells, it is appropriate to use interesting glass, sea pebbles and other finds made on the sea or river bank in inlay.

Photo frames made from egg trays

These roses are made from regular cardboard that eggs are sold in in bulk.

All you need is a mirror, a few egg cartons, scissors, glue and spray paint.

1. Cut out the cells with petals

2. Cut out smaller petals inside the bud, and glue them with a slight offset of the petals.

3. Repeat until you have a full rose.

4. Glue the roses to the mirror. It is better to seal the mirror with masking tape; you still have to paint it.

5. Spray paint, let the paint dry and remove the tape.

Foamiran photo frames

Materials and tools

To make bright butterflies, prepare:

• foamiran (plastic suede) 2 mm thick, black and two types of color;
• thin white and lilac foamiran;
• glue "Moment";
• scissors;
• pastel;
• pencil;
• paper;
• cotton buds;
• knitting needle

Manufacturing technique and photo

On paper folded in half, randomly draw a template with a pencil - half the silhouette of a butterfly, or download a ready-made picture. You can transfer the silhouette of an insect from a book or children's coloring book.

Cut out the pattern with scissors, lay it on black foamiran, trace it with a knitting needle, lightly pressing on the plastic suede. The material for the base can be dark blue, brown, the main thing is that the top layer is much lighter. Repeat for a different size and shape.

Fold the paper template in half again and cut out another silhouette that follows the contours of the first, retreating 2-3 mm from the edge. Repeat with another paper pattern.

Cut out all four butterfly silhouettes from foamiran. Make decorations from thin material of different shades.

Tint the top blank with pastel, placing it on a slightly damp cotton swab. Color without using strong pressure, the movements should be light to get natural “live” shades. Apply colors symmetrically - in nature, these insects are always mirror-like.

Also color the detail of the second butterfly.

Fold the painted parts in half and randomly cut them into equal parts. Immediately arrange the resulting elements on black symmetrically, otherwise it will be difficult to choose the same ones later.

If desired, also cut the resulting shapes into smaller ones. The smaller they are, the more interesting the pattern of the wings will be.

Lay out the entire pattern of the wings and begin gluing the decor to the base one by one. It is advisable to work from the edge to the center, leaving a small black gap between the workpieces. This will create a volume effect and make the craft more interesting.

Try to ensure that all elements are glued symmetrically. Remember the perfection of nature.

Now you need to prepare the photo frame. From thick foamiran, cut out two circles that make up the base of the frame; in this master class, the diameter is 22 cm.

Make a smaller hole in one of them (for the desired photo).

Cut out a blank that fits half of the top photo frame. Glue it to the bottom base of the photo frame. Glue the front part on top. Follow the instructions printed on the glue tube.

Glue the resulting butterflies onto the photo frame, selecting good places as in the photo.

Cut randomly small butterflies from colored foamiran for additional decor photo frames and stick them on the front.

Apply pastel using the method already described on the frame and butterflies.

Glue a magnet if the frame will be placed on the refrigerator or attach a holder for a photo frame.

A photo frame with foamiran butterflies is ready to decorate your interior or become a gift.

If you want to make a wooden frame with your own hands, then you can explore several manufacturing options and choose the one that suits you. At first glance, it’s easier and faster to buy a ready-made wooden frame in a store, but in reality it’s not difficult to make such a product, and required sizes(even non-standard ones), and you can decorate the frame to your liking. If you have a large collection of photographs at home that you plan to hang on the wall, you will need a lot of frames, and this will cost money. The way out of the situation would be to make your own frames.

Wooden frames can be made using simple tools or using a woodworking machine. The finished frame can be decorated with elaborate carvings or burned beautiful ornament. Such products can be done by craftsmen, but it is better for beginners to try their skills on the example of a simple wooden frame made of smooth planks or slats.

Simple wooden frame

To make such a frame you will need: smooth wooden strips, a ruler or tape measure, a saw, a miter box, a plane if necessary, a simple pencil, staples for a stapler, thick cardboard or a piece of fiberboard, metal clamps, twine, sanding paper, paint, varnish and decorative elements to decorate the frame.

The procedure for making a wooden frame

• Estimate the dimensions of the frame and select transverse and longitudinal wooden planks. You can cut a wooden strip into four elements. All parts of the future frame should be as smooth as possible, so if necessary, they can be planed and then treated with sanding paper.
• The ends are sawed off wooden planks at an angle of 45 degrees. To ensure that the corners are even and the product comes out neat, it is better to use special device– miter box with suitable connectors.
• The ends of the planks are greased with PVA glue and pressed tightly at an angle of 90 degrees. To fix the corners, the frame should be tied tightly with twine, making sure that the corners do not move. Can be used to secure the corners of half staples from a stapler. They are cut into two L-shaped halves. Next, these corners are inserted into the middle of the cuts at the ends of the wooden slats, and then the two sides of the frame are connected.
• The PVA glue hardens for 15-20 minutes, and after that the frame is again treated with sandpaper and coated with paint or varnish. You can use stain or potassium permanganate, which also gives wooden products beautiful brown shade.
• The reverse side of the frame is cut out of thick cardboard or a piece of fiberboard. If the design is not intended to be collapsible, then you can glue the back side to the frame with glue, and for a collapsible frame, use special metal clips.

Wooden frame with passe-partout

This frame is well suited for decorating photographs, as it will emphasize the expressiveness of both color and black and white photographs. Before you start making a frame, you need to carefully consider not only the size of the frame, but also its pattern, as well as the color of the mat.

This decorative frame is made of wooden planks and thick cardboard (for passe-partout). Profiles for a wooden frame can be very different - smooth, with carvings or patterns; the type of passe-partout also varies - thickness, color of cardboard, its pattern. In this regard, you can choose frame details that will be in harmony not only with the photograph or painting itself, but also with the entire interior of the room. This is especially true if you plan to hang several paintings - they must be combined with each other. For example, on dark walls or surfaces of rich color, light wooden frames look good. Accordingly, on light walls you can hang paintings and photographs in dark frames.

Today, there is a wide variety of ready-made photo frames in stores. But sometimes there is a desire to do something yourself so that the product turns out to be truly original.

How to make a photo frame

The process of creating a photo frame from wood with your own hands is quite creative. Therefore, different methods are used to obtain the final result.

DIY wooden photo frame.

First way

Least labor intensive and easy to use.

1. First of all, you need to choose the right fittings from which the future photo frame will be made. To make a wooden frame you will need wooden slats, glue, paints, sandpaper, staples for a stapler.
2. Of course, it’s also worth paying attention to what size the future frame will be. Next, the same length of all four sides of the future product is correctly measured. After which the edges of the slats are filed at an angle of 45 degrees.
3. Then, using staples, the two sides of the frame are connected, so that the joint becomes barely perceptible. But this is not enough; the sides of the future frame should be coated with glue before connecting them with staples.
4. After the glue has dried, you can start decorating the frame. In this regard, everything will depend on your own wishes and imagination.
5. After decorating the frame and gluing the selected decorative elements to it, you can place a photograph in it. This can be done using a stapler, and the photo must first be laminated. This will allow you to maintain its appearance for as long as possible.

Second way

The next method is more labor-intensive, although the initial principle of operation is the same as in the first case. But this version of the frame requires the presence of a baguette. First of all, stick together wooden blocks identical sizes, then the same bars are glued together, but smaller in size, for the second frame. The result is an object that looks like a box.

The decorative elements of a wooden photo frame can be very diverse.

The joint that connects the two frames is glued decorative baguette. It is coated with glue twice before use. After drying, the wooden frame can be painted at your discretion. The result is an unusual and original product.

An item made with your own hands always brings more joy and satisfaction than something bought in a store. For example, a picture frame assembled with your own hands will always evoke more positive impressions.

A do-it-yourself frame can also be made using special machine on wood, where you can cut out beautiful patterns and make unusual ornaments. But this is usually done by craftsmen who have experience in this type of work.

Wood photo frame

Wooden frame, will always win among others, with his own appearance, and plus, environmentally friendly materials. And any photo in it will look harmonious. When the question arises of how to make a frame out of wood, you should understand that, no matter which version of its production is chosen, it is the end result that is important.

Original do-it-yourself wooden photo frame.

Very often, in order to make a frame, they use in a simple way tightening it with a rubber band. That is, the tape tied in a loop glues wooden blanks, which must be sawn at 45 degrees. True, it is not always possible to complete such work the first time, since it requires certain skills.

Another method can be used. It requires a square sheet of plywood, along the edges of which beams are screwed. They should be located at an angle of 90 degrees. With their help, already prepared elements of the future frame are pulled together and glued together. After tightening, you need to check how the corners of the frame are located relative to each other.

Have you recently flown to hot countries, been invited to a grand wedding or an unforgettable anniversary? To preserve the memory, did you take a lot of photographs? Now they are inserted into albums and thrown onto shelves in cabinets, but do you really want these memories to please you here and now? Insert photos into a frame, which you can not only buy ready-made, but use your imagination and decorate it yourself. After all, then you will put it on your desk in the office, hang it above your bed, make it part of your interior, or simply give it as a gift and surprise the people close to you. And it will be cool! And in this article we will figure out how to decorate a photo frame with your own hands, do it correctly and inexpensively. Since there are many design solutions and method of decoration.

The easiest way to decorate a frame is to stick something on it, for example, newspaper tubes

First, let's look at papier-mâché technology, which some call French. Let's remember what the whole family did in childhood various crafts, animal figures, vegetables and fruits. To do this, use pieces of finely torn paper and homemade paste or silicate transparent glue.

An ordinary frame can be decorated using papier-mâché technique

The basis will be a regular frame, which can then be used for its intended purpose. Since it is simply removed from the frozen form at the end.

We will need:

• newspaper;
• paper (can be used);
• stationery knife;
• soft brush;
• lubricant;
• cloth or sponge.

At the first stage, we prepare small pieces of paper. They are cut with scissors or torn by hand.

You can use any paper - the main thing is that it is well saturated with glue

Lubricate the edges of the frame with a cream base (ointment, grease, Vaseline). We take each piece, moisten it with water and apply the first layer. Let it dry and carefully apply a layer of glue. Then we apply another layer of torn paper and let it dry. There can be from three to seven layers.

You can make curls on the surface of the frame by laying the laces and pressing them into the paper

You can also simply paint a finished photo frame with your own hands or decorate it with hearts, bunnies, and flowers made from papier-mâché.

After the glue has dried, the frame must be painted with gouache and then covered with acrylic varnish

Beauty in time

Let's try to make a photo frame ourselves in a vintage style, so that we can give it to our grandparents. It is also suitable for the interior of a country house or cottage.

A vintage frame looks good with a black and white photo.

There are plenty of design options. For example, artificially aging the surface of a finished wooden frame. For this you will need:

• paints;
• tassels;
• fine sandpaper.

Let's paint it gray or brown. Let's give it time to dry.

By combining colors you can achieve different effects

We will choose gold or green for the color of the second layer. But let’s not let it dry completely and go over the entire surface with sandpaper. And finally, you need to cover the resulting result with varnish.

There is no need to try to process the frame too carefully. The more “errors” there are, the more natural the aged surface will be.

Also suitable for vintage decor are newspapers, pages from an old book or sheets of a music book after solfeggio lessons. And on top of this you can make and glue a composition of homemade flowers and petals.

Frame decor with old newspapers

Master class on steel decoration

If there is such an opportunity, then we will move to the garage workshop and build a photo frame from metal. For convenience and durability, it is advisable to use a low-power welding machine with argon. Well, in ordinary everyday conditions, liquid welding based on binary glue is often used.

You can create a real masterpiece from wire

We will need:

• wire;
• side cutters;
• pliers;
• round nose pliers;
• needle file;
• welding.

It is advisable to take the wire for the base from steel. On finished frame frame, make two horizontal jumpers between which the photo will be inserted. It is very important to cover all this with a layer of paint so that possible corrosion does not ruin the photo.

You can make a three-dimensional frame, although it will take more time

Then we take a variety of wires made of non-ferrous metals: copper, aluminum, bronze. Using pliers and round nose pliers we form a composition. These can be ordinary circles, ovals, diamonds and squares. Or you can depict a twig with leaves and a bud. Be sure to take care of safety precautions. Wear gloves and safety glasses when welding.

The result was not just a frame, but a whole composition

Frame with pasta

Wondering how to decorate a photo frame with your own macarons? This decor is very suitable for any kitchen or dining room. You can do this yourself without any problems.

It’s convenient to stick pasta using a heat gun

For the base of the frame, you can use an old wooden cutting board with a handle or an unnecessary plate of a suitable size. Sand and prepare the surface. Glue pasta along the edge using a glue gun and paint them with paints of different colors.

Beads are suitable for additional decor of the frame

Try to buy and use Italian pasta(“Candele ca’Pont”, “Zanini”). They are made of multi-colored dough and unusual shapes.

But for this frame they didn’t take wooden base and an old leather belt

Let's take the knitting needles in our hands

To create decor for a bedroom photo frame with your own hands, you can use crochet techniques. Any photo edged with lace will pleasantly complement your interior.

Any frame made of wood, plastic or cardboard is suitable as a base.

Nuances of work and tools:

• knit with crochet needles;
• use only thick, dense yarn;
• necessarily a frame made of wire, plastic hoop or cardboard;
• possibility of use already ready-made schemes for crochet.

If you use your imagination a little, you will get a more original composition

Natural color

There are a stunning variety of photo frames with this theme. And almost all of them are made at home, using absolutely any natural materials.

Decorating the frame with moss, pine cones and acorns

While relaxing on the sea coast, do not forget to collect beautiful shells. Buy a regular frame and have a glue gun ready. From everything you have, first assemble the composition on a separate piece of paper. Carefully transfer your creation, insert your best vacation photo and enjoy the memories.

To decorate such a frame you need shells of various sizes.

And while walking through the forest, you can pick up not only mushrooms and berries, but a lot of material for decoration. Most easy options will take a cut of a small stump or a piece of tree bark. Treat the surface of the wood with termite repellents and varnish. And try a frame in the form of an ethnic wattle fence. To do this, you will need to collect small but elastic branches.

To decorate a small frame you will need a branch no more than a meter long, which must be peeled and cut into rings

Let's start sculpting

A photo frame sculpted from plaster or clay will be original and very distinctive. To do this you will need to use special knives and shoulder blades. And then bake the finished sculpture in the oven and, if necessary, apply multi-colored designs. With your own hands you can make from clay everything that your imagination is capable of.

To make a plaster frame, you first need to prepare a mold for casting

Cool photo frames are made from polymer clay

There are never too many photos

Have you often used computer applications to make collages? Make photo frames! You need to take a frame with wide edges and print required amount small (passport) size photographs, and then paste them around the perimeter onto a previously prepared background. A large family photo looks good in the center. Create a combination of frames on a tablet or poster, and friends and relatives can leave inscriptions with wishes and congratulations.

You can come up with a lot of collage options for family photos.

Children's frame

And let's not forget the kids! The little one can be allowed to choose toys, and then together decorate the frame with his photograph. Fun entertainment for the whole family!

Wooden photo frame with a cheerful fabric bee

Knitted frame in the shape of a mermaid

Waste-free production

Do not throw away or recycle all waste paper: magazines, advertising brochures, posters. Cut out bright and interesting elements from them and use the decoupage technique. You can also use greeting cards- this is also very useful material for decoration.

The base of this frame was made of cardboard, which was pasted over with flowers from old postcards. And the highlight of the composition was a flower made of polymer clay

Needle and thread

If you often do sewing, use some of your materials to decorate some kind of home photo frame. Tie the edges with multi-colored threads. Paint and glue the empty spools. Or just add a lot of unnecessary buttons to the edges.

If you don’t have a ready-made frame, make one from thick cardboard

Regular wool yarn is suitable for this decor.

Fragrant Symphony

And finally, let's look at a way to decorate frames using scents. Try adding scented candle wax, coffee beans or spices. After all, this can be a tasty addition to all of the above options.

“Edible” frame decor with cereals

Stylish frame with aromatic coffee beans

Feel free to experiment! Good luck!

How often do we remember the bright moments of life, the smiles of our family and loved ones with the help of photographs. And so that you don’t have to take out a photo album every time, we place the most valuable printed frames in frames.

Despite the fact that there is a large selection of photo frames, you want something special that emphasizes the plot and fits into the interior. To do this, we recommend making the frame yourself because making a photo frame with your own hands from improvised means perfect solution for those who value individuality, originality, handmade work and savings.

To create a special photo frame, almost any objects that surround you are suitable. The design idea, as well as the method for its implementation, can be found on the Internet or come up with yourself.

We offer some tips that may be useful to you:

• First you need to decide on the size and type of frame. To do this, you need to decide where exactly it will be located (on the desktop, wall, mantelpiece, window sill, in the nursery, living room, etc.). This will help you choose a style and size that will allow the photo frame to fit into your decor.
• Choose the execution technique and materials from which it will be created. interesting product.
• Find out the features of the things that will become the basis of your masterpiece (how to store, what to combine with, attach, etc.).
• Clear your workspace and prepare everything you need for work so that nothing gets in the way and everything you need is at hand.
• In a creative mood, begin the process of creating your masterpiece.

Paper photo frame

This is one of the easiest to implement and cost-effective frameworks. To make it, all you need is paper, scissors, a ruler and a simple pencil. You can pre-paint the base of the product (a sheet of paper) yourself or invite your child to do it. A frame made from a sheet with printed text (different font, size, style) will look original.

The size and shape of such a photo frame will depend only on the wishes of the author and paper parameters.

Cardboard photo frame

Cardboard is an easy-to-use material. It is easy to cut, bend, paint and glue. This material is strong enough to be used as a frame.

If you use colored cardboard, then no additional decorations are required. In other cases, the cover for the photo can be decorated as you like, using both purchased and various improvised materials.

Paper photo frame

Paper can be not only the basis of a frame, but also a decorative element that attaches perfectly to almost any surface.

You can twist tubes from newspapers and magazine pages and stack them in a well (weave them or place them side by side). Paper circles of different sizes made using the quilling technique are used for decoration.

A photo frame made using the origami technique or using embossing looks stylish.

Three-dimensional frames, including double ones, will highlight the photograph and fit into the interior. An interesting technique in creating a masterpiece is the use of paper modules or paper with torn edges. If children are involved in the process of making the frame, then use applique.

Wooden photo frame

One of the most popular materials for making photo frames is wood. Buy a ready-made base or blanks and decorate it with improvised means. And if you have the appropriate skills, make the frame yourself.

It is appropriate to burn a pattern or design on a wooden frame, as well as cut out a pattern. Photo frames made from tree bark or decorated with small blocks look unusual. The shavings will serve as an original decoration.

Interesting ideas for creating a photo frame from improvised materials

A photo frame is one of those necessary things that can realize almost any idea of ​​the creator. There are many articles and tips on how to make a photo frame with your own hands and what materials to use. Any frame, even the simplest one, will always be unique.

Here are some frame ideas that might interest you.

From sea stone

Due to the variety of sizes, shapes and colors, sea pebbles are an original and universal decoration. To decorate the frame, you can choose either different stones or elements of the same size, shape or color.

Pebbles can be decorated, drawings can be applied to them, or other decorative elements can be glued on them. The stones are attached to the base using epoxy glue, moment glue, rhinestone glue (it is odorless) or acrylic gel. But before attaching the material, the surface of the pebbles and base must be degreased and dried.

If this condition is met, the beautiful stones will not fall off and the photo frame will please the eye for a very long time. Additionally, you can coat the pebbles with clear varnish.

From tree bark

A frame decorated with bark or made from it will fit perfectly into a rustic and eco-style interior. The indisputable advantage of bark as a means of decoration is its availability, because it is available at any time of the year.

It is preferable to remove the bark from a growing or freshly cut tree, or you can wet dry wood. It is convenient to decorate a photo frame with small pieces of raw materials. This is creative and interesting work, because no two designs are exactly the same. Large pieces of thin bark can be wrapped around the base of the frame, and hard material is capable of serving as a reliable and original frame.

Dry branches as a decorative element

Dry branches, which many consider to be ordinary garbage, can become very interesting element decor. Different size and the structure of the sticks will make each frame unique.

The twigs that will be used to make the frame should not be eaten by insects. Collected material It is necessary to dry well to avoid rotting and the appearance of various bugs. Before use, branches must be treated - painted or varnished.

Photo frame from a book

If there is an old unnecessary book (for example, the page inside is damaged or torn out), then it may become beautiful frame for photography.

This frame will ideally fit into any interior if the book has a textile cover.

To make such a masterpiece, just cut a hole in the cover that corresponds to the size of the photograph, glue it with inside file and insert an image into it.

Thread frame

When decorating objects, preference is often given to textiles and threads. A frame wrapped in coarse yarn will fit perfectly into country style premises, and a combination of colored threads or melange - great idea for a children's room.

Flowers or patterns can be made from yarn and attached to an existing base.

Don't doubt your abilities and don't be afraid to come up with a masterpiece yourself. There are many master classes on the Internet on how to make a photo frame with your own hands. Whatever frame you make, it will be unique and priceless handmade, made with shower.

Photo selection of original homemade frames