Many children love to play with jelly mass, which does not stick to their hands. It can take different forms. This toy is called slime or slime. It was invented in the USA. Many children play with this unusual “plasticine”.

Buying such a toy will not be difficult. However, you can create it yourself. will be discussed in detail below. There are several options for how to make such a toy yourself.

You can create slime from various materials. The properties of the toy will depend on the method chosen. To understand to how to make slime from shaving foam, There are several ways to consider. All of them involve the use of various available materials.

Shaving foam helps give volume to the mass. It contains certain chemical elements that may be unsafe for the body if ingested. Therefore, parents should ensure that the baby does not try to put the resulting mass into his mouth.

Some recipes use the simplest ingredients that are always on hand in every home. For other methods, you will have to purchase special substances, for example sodium tetraborate (borax). The simplest and most effective recipes will be discussed below.

Slime, bought in a store, is a bright, interesting toy. It doesn't stick to your hands. However, when making slime at home, you should not expect absolute similarity of the final product to the purchased version. When considering, you need to be prepared for this.

If glue, starch and other similar elements are used in the process of making a toy, the mass will still stick a little to the surfaces. Therefore, you should not throw it on the floor, wallpaper or other objects.

To make the slime just as colorful, you will need to choose the right dye. It is best if it is food grade. There are many options available in different colors. Children love bright colors. These are the colors that should be preferred.

Shaving foam can come in many different forms. You can choose products from almost any manufacturer.

The easiest way

Almost anyone can create one. In this case, you do not need to choose special glue. This is the easiest and safest way to create slime. First you need to mix the mixture of starch and water.

You should add the same amount of dry matter to a glass of warm water. If necessary, you can add starch. The maximum permissible concentration can be 350 g of dry matter per 1 glass of water. The composition should be mixed thoroughly. After this, shaving foam is added to the starch mass. You will need quite a lot of it.

If desired, you can add a little dye to the mixture at this point. Then everything is thoroughly mixed again. The result is a homogeneous mass with which the baby can play happily. It will not stick to your hands much. However, you cannot eat it.

Recipe with PVA glue

Another simple recipe is slime made from PVA and shaving foam. It is better to choose the freshest ingredients. You also need to prepare starch and warm water.

First, the starch mass is mixed according to the scheme presented above. Dye is added to it. Some craftsmen add sparkles to it. This makes the mass unusual. It should not have lumps, so all ingredients must be mixed thoroughly. Next, shaving foam is added. Everything needs to be mixed again.

At the final stage, PVA glue is introduced into the mass. Instead of starch, you can use soda. For 100 g of water you will need 50 g of glue. Add 1 tablespoon of starch or soda. In this case, the mass will be more shiny. This is also an interesting recipe that can be considered one of the simplest and safest.

Slime made from Titan glue

May be more complex. In this case, you will need to purchase not just PVA, but special glue. It's called "Titan". In this case, starch is not required. You can buy Titan glue in hardware stores. It also should not enter the child’s body. Parents of young children need to remember this.

It is recommended to knead the slime in a durable plastic bag. You need to pour the contents of a can of shaving foam into it. For two parts of foam you will need three parts of glue. It must be very fresh. Next, the contents of the package must be shaken well. The ingredients must be mixed thoroughly. The mass will thicken.

Before adding glue, you can add dye. The choice depends on the child’s taste preferences. He can choose the color of his future toy himself. Moreover, you can show your imagination. Instead of regular food coloring, you can add glitter of various sizes. In this case, the slime will turn out to be original and interesting.

Lizun with boron

In appearance it is closest to the version bought in a store. Therefore, you will have to purchase sodium tetraborate powder at the pharmacy. You can also use a liquid solution (4%). A drug such as Borax is also suitable. You should also purchase fresh PVA glue and dye.

Pour glue into the prepared plastic bag. Dye is added to it. Shaving foam is also poured in there. The mass is thoroughly mixed. Carefully pour the boron solution into the bag. You will need 1 bottle of liquid or pre-prepared dry substance. Mix 1 tablespoon of sodium tetraborate powder with half a glass of water.

After this you will get a jelly mass. Excess moisture must be removed from it. The resulting slime must be blotted well with a napkin. The clot needs to be mashed in the bag for another five minutes. After that they can play.

Slime made from glue and foam

Making slime made from glue and shaving foam, you can use the simplest components. The easiest recipe suggests avoiding the addition of starch, boron and other substances.

Simply add dye to PVA glue. A little foam is poured into it. The entire procedure is also performed in a package. Next, the mass is thoroughly mixed until it thickens. Then the resulting slime is taken out of the bag and kneaded with your hands for a long time. This procedure will require quite a lot of time. However, after the glue dries, you will get a slime that is very similar to the store-bought version.

This is an easy and safe way to make slime at home. After playing with such “plasticine”, the child should wash his hands thoroughly.

After playing, the child must place the slime on the paper. This will prevent lint, dirt and other foreign objects from getting into the clot. In this case, you can play with slime longer.

If the baby does not put the slime in his mouth, this toy is considered absolutely safe. After using it, you must wash your hands thoroughly. It is not recommended to add too much dye to the mixture. The toy will leave marks on your hands and clothes.

The curd must be stored in a cool place and in a closed container. The mass should not dry out. If this does happen, you can place the clot in warm water for a few minutes. After this, the slime needs to be kneaded. It can be used again in the game.

Having considered how to make slime from shaving foam and other components, you can make an interesting children's toy yourself.

Who said that only children can make an entertaining and educational game out of nothing? A creative mother has everything in her hands so that her children can occupy themselves for a while with something very new and at the same time the damage from such a game is minimal. All we need for the game: dad's shaving cream, paint and maybe just a little starch. Well, if you want to organize a day of original games for friends, you’ll have to buy a few cans in reserve.

What to do with the little ones?

For the little ones who like to play with adult things, we can offer several options. I’ll say right away that it’s better to play in old things without the risk of ruining them. To begin with, I suggest playing in a small sandbox. To do this, you just need to mix the foam with baby powder. The mass clumps up perfectly and you can sculpt figures, and, if desired, make a snowfall.

Foam can be used to draw and make fun splashes. You just need to find water-based paints for children's creativity. It seems to me that you can even try diluting and mixing finger paints a little. Take the largest possible plastic container and squeeze the cream into it.

In general, the most entertaining thing is to draw with your fingers on the table. Today, special tables with lighting and sand are sold for huge amounts of money so that a child can draw and create pictures with his fingers. Spread the foam on the old table and give the opportunity to draw with it, not a single toddler will miss it!

Taking care of older children

If for children under three or four years old it is quite enough to simply get as dirty as possible without getting anything from their mother, then older children claim a more adult creative process. And here you can already connect several techniques using such homemade paints.

1. I really liked this option with making sand for modeling. The process is incredibly simple: you just need to mix the cream with dyes and add starch. Add coloring to the cups of cream.

And then we give one glass to our child and starch to help. Every little one will like the process: gradually add a spoonful of starch and get an increasingly dense mass for modeling. This is how beautiful it turns out, why not fashionable dough from boxes?

2. Bright, beautiful colors on paper are excellent. And volumetric paints are doubly good. To make these, you will need the same shaving cream, PVA glue, flour and food coloring. Your task is to mix all the ingredients and place the finished mass in a soft plastic tube. There is also complete freedom for experimentation. The more flour, the thicker the paint will be. As for its spreading and maintaining its shape, you will have to choose the most ideal option for the ratio of glue and cream. It seems to me that we will definitely try this with my daughter, we just need to find brighter paints and a big sheet of whatman paper.

3. Here’s another no less original way to keep children busy with creativity. From thick cardboard we cut out a variety of figures, letters, whatever your heart desires.

And now the most crucial moment! We create something amazing from paints by simply dripping drop by drop onto the foam.

4. And finally, the most interesting thing that can be offered for girls. Every young fashionista usually likes to decorate and make some original decorations on clothes. I was delighted with the method by which you can turn a simple thing into something incredibly cool. This is what unearthly beauty can come from the most ordinary white T-shirt or skirt.

The principle is simple and not much different from previous entertainments. Only this time we will add fabric paints to the foam.

Take a tray and squeeze out more cream there. Let's distribute it.

Now add a few drops of fabric dye.

Using a toothpick, we make stains that are very reminiscent of the pattern of natural marble.

We take a piece of white fabric and simply apply it to the side that will later be the face of the product.

Leave until the design is visible on the back side, which means the paint has been thoroughly absorbed.

That's how many such fun scraps you can make. The more dye you add, the brighter the marble pattern will be.

We will use the most ordinary garbage bags, or just a piece of polyethylene. This is a solution for large pieces of fabric. The principle is this: apply cream to one bag and distribute the paint, then put a second one on top and work everything thoroughly with your hands so that the dye is distributed and absorbed.

You can put the fabric itself between the bags. And then you just removed the top package and you're done.

In my opinion, it’s much easier!

Slime is the happiness of children of the 90s of the last century and the nightmare of their parents. The toy received the name “lizun” after the release of the film “Ghostbusters”, where one of the characters bore this name. The little voracious ghost ate everything that came in his way, crashed into pieces at speed on all sorts of obstacles, and loved to give slobbery kisses. Children fell in love with the toy for its resemblance to this on-screen character. And now many of them are purchased as slimes in stores, and those who are more economical and inventive make their own at home.

What is this strange toy?

If you see a plastic jar or container on sale filled with a jelly-like substance with the words “Slime” or “Slime” on the packaging, then this is it. You can understand what it is only by holding the slime in your hands. It is soft to the touch, wrinkles and stretches well, sticks to the walls and then slides off them, often leaving greasy stains.

Left alone, the slime spreads over the surface in a puddle, but is easily gathered into a lump with your hands. It can stick to your hands, flow through your fingers, but become elastic when it hits a wall.

Initially, slime was made from guar gum, a polysaccharide, and sodium tetraborate, better known as borax. The result was a material similar to slime, but with the properties of a non-Newtonian fluid. It does not spread, is easy to assemble, and compacts upon impact.

There are many types of slimes, here are some of them:

Slime. The mass, similar to jelly, is usually transparent. Doesn't stick to your hands, flows through your fingers in long threads, and spreads over a hard surface into a puddle.

Mucus is soft and sticky

Antistress. This is mucus placed in an elastic shell covered with a mesh. Forms bubbles when pressed.

“Anti-struss” slime relieves nervous tension well

Gum for hands. More dense elastic mass. It is easy to wrinkle and stretch.

Chewing gum for hands is more dense and elastic

Jumper. The densest slime. It is less elastic, but resilient. Bounces off hard surfaces.

The elastic bouncer bounces well off hard surfaces

Fluffy slime. Fluffy and very pleasant to the touch. It wrinkles and stretches well.

Fluffy slime is the most fluffy and airy slime

Plasticine. Keeps its shape better than others. Due to its plasticity, various figures can be sculpted from it.

Plasticine holds its shape better than others

There are slimes that stick well to surfaces, matte, transparent, with foam balls, pearlescent, glowing, and in various colors.

Of course, you can buy such a toy in a store, but it’s more interesting to make it yourself using improvised materials. Moreover, this is not difficult to do.

How to make different types of slimes at home

What the industry uses to make modern slimes is not known for certain, but it is a fact that when sodium tetraborate is used at home, the substance turns out to be very similar to a store-bought toy. Let's start with this recipe.

Made from sodium tetraborate and PVA glue

Let's prepare all the ingredients:

Now you can pick it up, pull it, crush it, throw it and put it back together - the slime is ready.

Advice! When choosing a dye, remember that some of them stain your hands.

With hair or shaving foam

Fluffy slime is made using the same recipe. To give the slime fluffiness, hair or shaving foam is added to the composition.

1. Pour the glue into a suitable container.
2. Attach foam to it. the amount depends on how fluffy the mass should be. Stir.
3. Add a dye, you can use aniline or any other. Mix thoroughly again.
4. Pour sodium tetraborate into the mixture little by little while stirring. As soon as the composition thickens enough and begins to lag behind the walls of the dish, you can pick it up and play.

The main condition for success in making this type is good glue. If it doesn’t thicken, all your work will go down the drain and nothing will work out.

From PVA glue and soda

But not only borax is used as a thickener. Baking soda performs this function perfectly.

1. Dissolve baking soda in a small amount of water.
2. Pour the glue into a bowl, add dye and mix.
3. Add the soda solution little by little while stirring thoroughly. Wait for the mass to thicken. This will not happen right away, so don’t rush to add more soda solution.
4. Mash the finished mass in your hands. It will turn out even softer and more tender than the previous one, it wrinkles and stretches well.

Slime can be made shimmering by adding glitter to it.

Made from alcohol and silicate glue

Used to make slime and silicate glue. But the properties of the toy will be different.

1. Pour glue into a bowl and add color with any dye.
2. Stirring in a circular motion, add alcohol little by little. You will see how the mass thickens, forming dense lumps.
3. Leave the substance to rest for 20 minutes.
4. Gather into a ball and knead well with your hands. This slime will not stretch or stick; its consistency is quite dense. But he will make an excellent jumper.
5. Roll the mixture into a ball and try to hit it on the floor. The elastic ball bounces well off hard surfaces.

From starch and hydrogen peroxide

A hard bouncy ball can be easily made using ordinary starch. This does not require large expenses; the toy will cost pennies.

1. Mix 100 g of starch with 200 ml of hot water until a jelly-like mass is obtained.
2. Let cool and combine with 100 ml of PVA glue.
3. Add a suitable dye and a few drops of hydrogen peroxide. Mix everything well. Hydrogen peroxide will give the toy lightness and airiness.
4. Roll the resulting mass into a ball. The jumper is ready.

Video instructions for making slimes from glue

From Titan glue and shampoo

A simple way to make slime is with Titan glue. This glue is non-toxic, and after drying it does not lose elasticity.

1. Mix glue with shampoo in a ratio of 3:2. The color and transparency of the toy will depend on the shampoo. For greater color intensity, add dye.
2. Leave the mixture to thicken for a while, usually 5 minutes.
3. Lizun is ready. Simple and fast.

This recipe does not always yield the desired result; different shampoos behave differently. But it's worth a try, because you have nothing to lose.

Advice! Stir the mixture until it leaves the sides of the bowl and stops sticking to your hands. These are signs that the toy is ready.

From a glue stick

Another type of glue - pencil, is also quite suitable for this purpose. Here we again need sodium tetraborate.

1. To do this you will need 4 glue sticks. Remove the rods and place in a fireproof container.
2. Using a microwave or oven, melt the rods until a viscous mass forms.
3. Add dye to the glue mixture and mix.
4. In a separate bowl, dissolve borax in a small amount of water.
5. Add the solution to the glue little by little, stirring constantly, until the required consistency is obtained.

Two video recipes for making slime

Made from plasticine

Slime can be made not only from glue. A good and durable toy is made from plasticine.

You will need:

• plasticine - 100 g;
• gelatin - 15 g;
• water - 250 ml.

1. Soak the gelatin in 200ml cold water using a fireproof container.
2. When the gelatin swells, bring it to a boil over low heat and immediately remove from heat. Let cool slightly.
3. Knead the plasticine until it becomes soft. Mix with remaining water.
4. Combine still warm gelatin with plasticine, mix well until smooth.
5. Place in the refrigerator for half an hour.

This toy can be given to children without fear, because it contains no harmful substances. There is a small problem: this type leaves greasy stains on the wallpaper. Make sure children don't throw it against walls.

From toothpaste and liquid soap

A completely safe option is toothpaste slime. You can use regular and gel paste.

1. Mix 20 ml of toothpaste and liquid soap with 5 teaspoons of flour.
2. Stir until there are no lumps, first with a spoon and then with your hands. To prevent the mixture from sticking to your hands, moisten them with water and knead them well again.

From soap and shampoo

For the next type you will need only two ingredients that can be found in any home. This is liquid soap and shampoo for hair.

1. Mix liquid soap and shampoo in equal proportions until smooth.
2. Place in the refrigerator overnight.
3. Take it out and have fun.

Since this slime is made of water-soluble substances, keep it away from moisture. The warmth of your hands quickly softens the toy; it should be stored in the refrigerator. And do not allow it to come into contact with dust and dirt; it will not be possible to wash the slime. If treated with care, this toy will last about a month.

From hand cream and perfume

You can even make slime from hand cream. There is no guarantee that the toy will work, but it's worth a try.

1. Squeeze the cream into a bowl.
2. Add paint and mix.
3. Add perfume little by little and mix everything thoroughly. The mixture will begin to thicken.
4. Having achieved the desired consistency, knead the toy with your hands.

From flour

Parents are often afraid to give slime to young children for fear that they will put it in their mouth. For such a case, you can make a completely safe, edible slime without chemicals.

For this you will need:

• flour - 400 g;
• cold water - 50 ml;
• hot water - 50 ml;
• food coloring.

1. Sift the flour into a bowl and mix with the dry coloring.
2. Add cold water and stir again.
3. Pour in hot water and knead the resulting dough thoroughly. It should turn out smooth and without lumps.
4. Place the dough in the refrigerator for several hours.
5. Knead it well with your hands again.

Not all products and substances are suitable for making slime. Not everything that looks like slime has the necessary properties. To avoid making mistakes, watch the video.

Video experiments on making slimes from different ingredients

How to give slime the desired properties

Even if the slime didn’t turn out the way you wanted, you can fix it.

1. Vinegar will make the toy more elastic. Pour in a few drops and the slime will stick better.
2. By adding hydrogen peroxide, you will get a fluffy mass, this is how fluffy slime is made.
3. A few drops of glycerin will help make the toy slippery.
4. Glowing slime can be obtained using fluorescent paint.
5. If the slime is too soft, place it in a jar, add a few salt crystals, close the lid tightly and leave overnight. The salt will draw out excess water and restore elasticity to the toy.
6. If the slime is too hard, it will become softer if you place it in a container overnight and add a few drops of water.
7. To make the toy smell nice, scent it with essential oil, food flavoring or vanilla.
8. Magnetic slime can be made by adding small metal filings or iron oxide to it. Knead the toy well so that the additive is evenly distributed. And then your slime, as if alive, will be drawn to any magnet.
9. You can create an anti-stress toy by placing slime in a balloon. This can be done using a large syringe without a needle.
10. To increase the size of the slime, place it in a container of water for 3 hours. Don't be alarmed if it falls apart, that's how it should be. Add a little salt and hand or body cream. Stir. The slime will not only restore elasticity, but will also become larger.

Advice! Add colorful foam balls to the soft slime. This will make it colorful and increase its volume.

Storage and care rules

Slime is a capricious toy and its lifespan is short. To prolong it, you need to know how to properly store and care for slime.

1. The slime is stored in a plastic container with a tightly closed lid.
2. To prevent the slime from drying out, keep it away from heat sources and do not leave it in the sun.
3. Dried slime can be revived with a drop of water, and soaked slime with salt.
4. You need to play with slime. Long-term storage can lead to mold growth. This toy will have to be thrown away.
5. Frequent use will lead to rapid contamination of the toy and loss of properties.
6. Avoid contact with fleecy surfaces, the slime will collect hairs and become unusable.

Slime is not just a children's toy; some types also have practical applications. For example, you can use it to clean a computer keyboard or clothing from sticky debris. Elastic ones develop fine motor skills and increase finger strength. And they simply calm you down, relieve stress and give you a good mood. Make slimes and play, it's so much fun!

For inspiration! There is one recipe - but there are many ideas! The best part is that there are no exact proportions here - a little more foam, and you will get a homemade modeling mass, a little more soda - and the toy snow is ready!

I'll say right away - TWhich option is suitable for children over 3 years old?, since you need to be sure that the mixture of shaving foam and soda does not end up in your mouth.

It is also better to use hypoallergenic shaving foam, if the child’s skin is prone to allergic reactions (or do not use it at all).

Option No. 1 “Ice cream made from shaving foam and soda”

How to do: Take the cheapest bottle of shaving foam, squeeze the foam into a container and mix it with soda. In this option, you need to add more foam so that you can make balls. Place the “ice cream” in silicone baking molds.

On top, our ice cream is sprinkled with dyed rice, which we used as a confectionery topping.

How to color rice I am sure that everyone has already colored rice and made the most incredible developmental ideas out of it. Over the entire history of our sensory games, I tried many coloring recipes and settled on this one. Compound: - rice - food coloring (for example, Easter) - water (or alcohol) - containers for painting - containers for rice - spoon How to do: 1. Distribute rice in a container (according to the number of colors). 2. Add a small amount of alcohol or water (about 1 tsp) to the food coloring, stir and pour into containers. 3. Mix the rice thoroughly with a spoon until it turns colour. 4. Leave to dry (it’s better to put the rice on plates and spread it in an even layer; if it’s small portions, it will dry faster). 5. When the rice dries, it will need to be transferred to storage containers.

Option No. 2 “Frozen yogurt with shaving foam toppings”

How to do: This is a very simple option - just squeeze the foam into cups and sprinkle with homemade fillings. Everything can be treated or sold to those with a “sweet tooth”!

Used as cups for yogurt and fillings - this is such an “entertaining pyramid”.

Use these culinary measuring spoons as ice cream scoops and for toppings (they attach to a ring - easy to store).

How to make filler: We take curly baby pasta and “spider web”, pearl barley and split peas. All this is colored in the same way as rice. Instead of “chocolate” you can sprinkle chicory or ground coffee.

Option No. 3 “Soufflé made from shaving foam and food coloring”

Colored shaving foam with food coloring can be used as a substitute for finger paints, but why not turn it into an airy soufflé for a toy confectionery shop!

Option number 4 “Cheesecake with whipped cream”

How to do: Take a household sponge, cut it diagonally - our “rainbow cheesecake” is ready! Squeeze all the shaving foam on top - like whipped cream and sprinkle with whatever you like.

Option No. 5 “Mass for modeling”

This can be called snow, sand and snow sand, since the mass turns out to be crumbly, but it makes excellent “cakes”, like sand.

How to do: mix shaving foam and soda, but this time you need to add more soda!

All that remains is to arm yourself with molds or build walls.

Such “cakes” can be decorated with details from a children’s mosaic.

No. 6 “Cakes” made of cardboard and napkins

And here is another “dessert” idea, this time made from cardboard and ordinary napkins.

For the “cakes” you will need:

- cardboard circles (base)

- colored rice

- cotton pads

- glue

- paper napkins

How to do:

1. Cut out small circles for the base from leftover cardboard boxes. To draw a circle evenly, you can simply attach a small saucer.

2. Cut colored paper napkins into pieces (I had the most budget option from Auchan).

3. Cut out the “glaze” from cotton pads. 4. We paint the rice - this will be our “confectionery topping”.

Now, apply glue to the cardboard base and “cook” our cakes - i.e. Let's post all this beauty. Then, apply more glue and sprinkle with colored rice. That's it, you can play and feed the entire doll and toy company!

For many men, foam is their usual shaving product, but what to do if you run out of product at the right time and need to safely remove stubble? After all, only thanks to shaving foam can a man easily and easily remove excess facial hair without damaging the integrity of his facial skin. Experts advise using folk recipes and making foam yourself.

Few men know how to make shaving foam and that such a thing is even possible. In fact, the experience of previous generations shows that even several improvised means can be used to prepare such a shaving product at home. This can be regular soap, solid oils and a soap base, to which various useful components are added.

In fact, making your own shaving foam is quite possible, and any man can cope with such a task. Moreover, alternative products are no worse than high-quality foam, if prepared correctly according to the recipe and used immediately for its intended purpose.

To prepare homemade foam for safe, gliding and gentle removal of stubble, you can use:

• toilet or simple laundry soap;
• vegetable oils of solid consistency;
• soap base and additional components.

The first version of soap-based foam is ideal for men with normal and oily skin types, since the alkalis in the soap remove fat and disinfect the epidermis. The soap base can be supplemented with plant extracts, moisturizing ingredients and essential oils, making it ideal for sensitive skin. And the oil-based product is more like a shaving cream that will moisturize and soften dry skin types.

Important! Do-it-yourself shaving foam should be used immediately after preparation, as it will whip up and after some time the effect of the foam may be lost.

Recipes for home cooking

Many men knew how to make shaving foam from soap long ago, when shaving cosmetics were not invented. Having no alternative, all men foamed simple soap and applied the product to their facial skin with a brush, after which they removed the stubble with a straight razor.

From soap

Today, to prepare an alternative soap foam, you will need to use the following available tools:

• toilet or laundry soap;
• brush;
• water temperature about 50 degrees;
• ceramic bowl.

To whip soap until foamy, experts advise choosing a brush made from badger hair. To start, you need to dip the brush in warm water and leave it there for a few minutes to steam the villi. Next, you need to shake off the remaining water from the brush, and then rub it over the surface of the soap until foam appears. The resulting foam must be quickly transferred to a bowl until the required amount is collected.

Using warm water, you can adjust the thickness of the foam, adding a few drops as needed. After this, the foam is immediately applied to the skin of the face with a shaving brush; if necessary, the foam can be constantly whipped with a shaving brush. Shaving must be done with a razor with sharp blades, as you can damage the skin and stubble hairs. After completing the procedure, it will be enough to wash your face with cool water and apply a moisturizer after shaving.

From soap bases

Soap base is sold in any pharmacy or specialized stores; it is used by people who independently prepare natural products for hygiene procedures. When creating shaving foam from such a base, you can also use your imagination and add various valuable components. For example:

• glycerol;
• oils (peach, almond, coconut, grape seed, citrus, shea, jojoba, wheat);
• herbal decoctions;
• essential oils.

In addition, you will need utensils for preparing the product in a steam bath, a grater, and a container for the finished product. You need to grate a piece of soap or cut the soap base into pieces, heat it in a steam bath and pour in about 100 ml of herbal decoction. The product is stirred until the soap melts; you can add a little sea salt to speed up the absorption of the soap and rejuvenate the skin with salt minerals.

Add half a teaspoon of vegetable oil, glycerin to the product, you can add vitamin E and a couple of drops of essential oil for aroma (but the ether is added to the cooled product). Using a mixer or a simple whisk, beat the finished soap until foam forms. After this, the product is poured into a ready-made container and can be used for its intended purpose.

From solid oils

You need to select shaving oil with your own hands, taking into account personal preferences and skin reaction characteristics. Experts advise choosing from the following solid oil options:

• Shea Butter;
• coconut;
• pistachio;
• cacao butter;
• almond oil;
• mango butter

In addition, you will need a container, a couple of drops of any essential oil and water. You can mix several cut oils in equal proportions, melt them in a water bath until liquid, add a little olive oil or vitamin E and mix well. Add esters to the cooled mixture and beat with a whisk or mixer. After this, the self-made foam cream can be used for shaving.

For reference! All of the recipes listed on how to prepare your own shaving foam are in demand among men all over the world; they protect the skin from injury, nourish and moisturize, taking into account the needs of the skin.

Important nuances when preparing

Before using the prepared product, you need to test it for an allergic reaction. To do this, apply a small amount of homemade foam to the skin of the wrist or on the bend of the elbow, and then check whether redness appears on the skin. If the skin does not react, this alternative foam can be used to remove excess facial hair.

The choice of recipe according to skin type is as follows:

• dry skin - foam from solid vegetable oils;
• normal and oily skin - foam from laundry or toilet soap;
• sensitive skin - foam from a natural soap base.

Brushes for applying foam to the face are best used from natural materials. For sensitive and dry skin, liquid glycerin and vitamin E should be added to the composition of the homemade product to ensure the machine glides, nourishes and moisturizes the skin after such a procedure. Any prepared shaving foam should be used once, and fresh foam should be prepared for the next procedure.

Conclusion

DIY shaving foam is ideal for those men who have an allergic reaction to most cosmetic products. You can prepare foam from solid vegetable oils (you will get cream foam), from a soap base (an alternative to shaving gel), as well as from simple toilet or laundry soap. When creating foam at home, you can give free rein to your creative impulses and fantasies by adding any other valuable substances and components to the cooking recipes.