DIY folding bed drawings. Our electronic catalog contains a do-it-yourself folding bed from leading Italian manufacturers. Lift bed materials

23.06.2020

We embroider a Slavic amulet with a cross

Name Vitaly - meaning, fate and character

Finding non-standard furniture in furniture stores is quite difficult, and custom orders are more expensive, so for many, the optimal solution is a do-it-yourself folding bed. Typically, the decision to make a folding bed-wardrobe is made by the owners of small-sized apartments, where every bit of usable space counts. The lifting mechanism that transformable furniture is equipped with allows you to lower the bed at night and put the sleeping area in the closet during the day, freeing up space that a regular bed would take up all day long. Having drawings, available materials and a standard set of tools, a folding bed is easy to make yourself.

Design principle and design options

A wardrobe bed is a transformer consisting of a fixed wall box and a berth (bed) that can be raised and lowered.

More popular are transformers of a vertical design (longitudinal-folding), in which the head of the bed is attached to the walls of the box. They can be one-and-a-half, double, or less often single, and when folded they imitate a closet.

Cross-folding or horizontal transforming beds are mainly installed in children's rooms; they are also suitable for teenagers and short people. These are mainly single beds that recline sideways, and when folded they imitate a chest of drawers or a shelf. Sometimes horizontal beds are made into bunk beds, similar to shelves in a reserved seat carriage.

The bed of a vertical bed is usually made solid, but sometimes it is equipped not only with head hinges, but also with side hinges, and folds in half when put away in a box. The closet for such a transforming bed needs a deeper one, but its upper part can be used as a mezzanine for bedding.

On the sides of the box you can mount shelving in the same style, or make a folding bed part of a furniture set. Sometimes the bed is raised relative to the floor, and in the lower part of the closet there are small compartments for shoes, a bed with hinged doors or drawers.

Set of materials and tools

The most important element needed to make a folding bed is a lifting mechanism. On sale you can find mechanisms with different operating principles:

mechanical;
spring;
on gas shock absorbers (gas lifts).

The last option is the most modern, with its help the transformer folds and unfolds without extra effort, the movement of the bed is smooth and silent, the bed is securely fixed in the desired position. The materials for making the stock must be selected in such a way that it is strong enough to withstand the weight of a person(s). At the same time, the folding bed should not be too massive so as not to create excessive load on the mechanism.

In addition to the mechanism for making a bed, you will need:

timber with a section of 40x40 and edged board for the frame;
sheets of plywood or slats for the bottom of the berth;
Chipboard, if the cabinet will be made with a back wall;
furniture panels made of laminated chipboard, MDF or solid wood for the sides and backs of the bed, box walls, cabinet facades. There are many companies where you can order the cutting of material into parts of the required size, as well as process their edges;
furniture legs (if the bed will rest on them);

To determine the size of the parts, you need to focus on the dimensions of the mattress. The height of the box should be slightly greater than the length of the mattress; the thickness of the front and back walls of the bed should be added and a gap should be left. The width of the box is made 16 cm larger than the width of the mattress (space is needed to install a lifting mechanism).

The depth of the cabinet-box is usually equal to the height of the mattress + 32 cm. For the frame of the bed, you need to use a beam of such a size that the frame is slightly larger than the mattress, and it fits freely into the finished box. For the sides, front and back walls of the bed, you can take boards whose width is equal to the height of the mattress. It will protrude above their edges, since it will lie on the frame and the bottom fixed on top.

You will need strong belts to secure it, loops to secure the raised bed, fasteners - self-tapping screws, corners, possibly dowels, furniture fittings. If you purchase already cut materials, you can do without a jigsaw or saw, but a drill, screwdriver or screwdrivers are a must, a hammer will come in handy. You will also need tools for measurements and markings - a tape measure, a square, a pencil, a long rigid ruler, a level. Having decided on the design and location of the bed, as well as having prepared the necessary materials and tools, you can begin assembly.

Sequence of work

Installation of the transformer begins with the box. For the side panels, material 25 mm thick is used, the top panel can be thinner, from 16 mm. Sometimes the box is assembled without a bottom, but a platform is attached to the floor - a piece of double-thickness slab on which it will rest. If the bed is large, additional stiffeners are needed inside the box, at least one board installed horizontally closer to the floor, but it is not necessary to create a back wall. The parts can be connected to each other using furniture dowels - wooden cylinders for which holes of the required diameter are drilled.

Markings are made on the walls of the box for mounting the lifting mechanism. The floor and wall are marked for installation of the box, holes for fasteners are marked (fastening pitch - 25 cm). It should be taken into account that each time when raising or lowering the berth, part of the applied force will be directed to tearing the box away from the supporting structure. Therefore, it must be securely fastened; the best wall for these purposes is concrete or brick. Fastening to the wall is carried out using metal corners and self-tapping screws.

Then the bed is assembled - the frame frame is assembled from timber, and if necessary, stiffeners are made inside. The frame is sheathed on the sides with boards or pieces of slab, and lamellas or a sheet of plywood with ventilation holes are placed on top of the frame. This creates a box in which the mattress will be placed. To the bottom of the frame you need to attach the parts of the bottom of the bed, which will imitate the facade of the closet. You also need to think about what the outer edge of the bed will rest on. Traditional legs will stand out when the folding bed is tucked away in a closet. The following solutions are possible:

removable or swivel legs;
when disassembled - a support, when assembled - a hanger, a handle that can be pulled to set the transformer in motion;

the transverse panel, which serves as a support, looks like a shelf when assembled;
a rolling box is used as a support.

A lifting mechanism is mounted in the designated places of the box, its other edge is fixed to the outer edge of the bed in the area of the headboard. The mattress is placed in place and secured with special straps. After assembly, the structure must be tested to check the operation of the gas lift. You need to make sure that the transformation process occurs without distortions, jamming and does not require excessive effort. You may have to adjust the mechanism and adjust the parts. You should also check if there is a gap between the support and the floor.

Compact and multifunctional folding furniture is an excellent option for a small apartment. Often the same room has to be used for different purposes, and the room has to be transformed from one state to another very quickly, so the use of folding furniture is very useful.

The working principle of a folding bed. a - the bed can be easily removed from the cabinet niche; b - bed unfolded.

A folding bed is one of the most popular options for creating a versatile room.

Folding bed options

Folding. A very convenient option that allows you to significantly save room space, since the structure can be completely removed. You can make such a bed yourself; just take a regular spring mattress, place it in a wooden frame and fasten the structure with loops to a beam nailed to the wall.
Secretary bed. This design consists of two supporting posts to which a folding bed is attached. In this case, the outer wall, when folded, will serve as a desk cover.
Folding bed. A well-known Soviet-era version. Modern folding beds are more convenient and compact, they fold easily and can be stored in special bedside tables and cabinets.

Features of the folding design

Folding structures can be horizontal or vertical. If we are talking about a sleeping place for a child, then most often they choose a horizontal option, which the child is quite capable of folding on his own. As for the load on a folding bed, it can be absolutely anything, so it’s perfect for everyone, regardless of weight category. Solid wood or chipboard is used as the main material, and a mandatory element is a lifting mechanism in the form of gas elevators or special springs. It is more rational to use gas elevators, whose service life is longer than that of springs, and they do not require additional adjustment. You should also take into account such a nuance as fastening the bed, which is only possible if you have thick concrete walls.

A folding bed is a multifunctional piece of furniture. Additional shelves above and on its sides, cabinets, racks, and you can provide a special compartment for bed linen will help to further expand the purpose of the sleeping area. If your bed goes into a closet, then another similar closet for storing things will look good next to it. The folding design can fit into almost any interior, regardless of the size of the room and its purpose. The main thing is to carefully work on the stylistic design of the room and wisely select other pieces of furniture. The dimensions must comply with generally accepted standards: the width of a single bed should be 80 cm, a double bed should be 160 cm, and the length should be at least 2 m. A mattress is selected in accordance with the dimensions, the filling of which can be very varied depending on personal preferences.

Making a folding bed yourself

To build a bed with your own hands, you will need boards, chipboard or fiberboard, plywood, fasteners, a lifting mechanism, hinges, a mattress, and belts. First of all, it is worth drawing up a project for the sleeping area, in which all dimensions will be accurately indicated. The best option would be a transformable bed that folds into a closet. In this case, its width and length should be slightly less than the width and height of the cabinet. Then we proceed to making the frame of the future bed from boards and chipboard. Please note that the structure must be, on the one hand, durable, and on the other, light. The front legs of the bed can be made in the form of a solid wall, mounted on hinges.

Particular attention should be paid to the installation of the lifting mechanism. As noted above, it is best to use gas elevators as a lift, the power of which is selected in accordance with the weight of the bed. The gas elevator is installed in this way: the parts are attached to the sides of the bed and the sides of the closet. The next step is to install the shock absorbers first from below and then from above. If you decide to make a single bed with a light bed, you can limit yourself to hinges and not install an additional lifting mechanism. After constructing and installing the bed frame and installing the lifting mechanism, all you have to do is lay the mattress and secure it with special straps. The final step will be the installation of cabinet doors and adjustment of fittings. Your trundle bed is ready for use.

Photo
For a small city apartment, saving space is extremely important, which is why folding furniture (transformers) is becoming increasingly popular. This usually applies to massive pieces of furniture - beds and sofas. It is not always possible to allocate a separate room for the bedroom, so there is a need to combine rooms such as a bedroom and a living room, a bedroom and a nursery. Manufacturers offer a variety of options for such settings. You can choose beds that differ in size and shape. But it’s not always possible to choose what you want. The way out of the situation is to assemble the bed with your own hands.

For those whose apartment space does not allow for large beds or sofas, furniture manufacturers have come up with a folding bed. During the day you can fold it up to create a sofa, and in the evening it becomes a cozy bed.

Assembly instructions are simple. Today you can find different bed designs. These models are convenient because they easily rise after sleep, without taking up any useful space in the room. During the day there is a cozy sofa with a shelf, and in the evening there is a comfortable bed for relaxation. As a result, the space is used as conveniently as possible, and the room is not cluttered with anything unnecessary.

Types of folding beds

A folding bed, assembled with your own hands, has a number of advantages:

It takes up little space, which allows you to free up room space for other needs.
Dust does not collect on the upholstery, since the structure is in assembled condition.
When assembled, the structure is not noticeable, does not interfere, and the room can be used as a living room.

These models can be divided into 2 large groups:

A longitudinally folding bed is usually disguised as a closet door.

Cross-folding ones, which are great for children. In appearance, they are very reminiscent of the shelves in sleeping cars of trains, that is, they lean to the side. Such beds can easily be disguised as shelves or used as bookcases. The designs of such beds are made single. They are comfortable and take up minimal space even when unfolded.
The longitudinally folding bed can be double. It is usually disguised as cabinet doors. After use, it rises to the top using a special mechanism. The weight of this design is large, so it is not intended for children. The bed frame can be used in a room where there is enough space to lift it, otherwise you will have to think about another option.

Materials and tools for work

To assemble a bed with your own hands, you need to prepare the following materials and tools:

Tools for making a wooden bed.

MDF boards with a thickness of 20 mm. They can be ordered already cut into the required shape and size.
A sheet of plywood with a thickness of 10 mm, which will be used for the bottom. It can be replaced with wooden planks, but a plywood sheet is installed much faster; you just need to drill holes in it for ventilation.
Fastening elements: nails, screws, metal corners, plates.
A special lifting mechanism that will ensure the movement of the bed frame.
A simple pencil, a long metal ruler, a building level, a building corner.
Sandpaper, drill, screwdriver.
Screwdrivers, sander, jigsaw.

A folding bed is easy to assemble; today you can find a wide variety of designs for this. But for this it is necessary to use drawings showing the assembly order.

Assembling the bed: main steps

The installation itself will be performed in the following sequence:

Diagram of a folding bed.

First you need to draw up a design for such a bed. You can use many ready-made ones that offer various options. It is enough just to carry out calculations for the future design, substitute the resulting dimensional values into the finished drawing. Usually the design is simple, it includes a box (mounted to the base), the bottom of the future bed (which is the outer part of the closet), a frame for the mattress and the mattress itself. A lifting mechanism is attached to the box, allowing the structure to be raised and lowered.
The assembly of the bed is as follows: 2 long side boards of the frame are fastened transversely, and 1 more central board is installed in the middle, which will give the structure the necessary rigidity. Craftsmen often use the interior space to create convenient drawers for bed linen and pillows that need to be put away somewhere after the bed is folded.
All fastenings are carried out using self-tapping screws, metal corners and plates; the structure should be as strong and reliable as possible. After this, you need to install a lifting mechanism. It can be purchased ready-made; it is mounted on the outer edge of the frame. The mechanism should not interfere with the use of the bed, for which it is necessary to first think about how and where it is best located.
Afterwards, the frame for the mattress is mounted, which is a structure made of a rectangular box and transverse slats. Instead of slats, you can use a solid surface of plywood sheet, it all depends on personal preference. But it is necessary to make round holes in the plywood to ventilate the internal space.
The folding bed is attached to the cabinet structure, and the functionality of the folding mechanism is checked. The front part is a panel that imitates the surface of cabinet doors, but it can also be designed in the form of an attractive decorative board with carvings. This panel is the last to be attached; it is securely screwed to the bed frame.

A folding bed is a convenient design that allows you to save space in small city apartments where there is a lack of free space.

Such folding frames can be of completely different types; if you have some experience, you can easily assemble them with your own hands. You just need to first decide on the model of the bed, draw up or take a ready-made drawing, and purchase the materials necessary for the work.

Just think about which piece of furniture takes up a huge amount of space in our small-sized homes? Of course it's a bed. Many people prefer to purchase compact folding sofas to save space. But not even the most comfortable sofa can replace the feeling of relaxation and comfort that you can experience while relaxing on the bed.

That is why folding beds, or, as they are also called, lifting beds, have become increasingly popular.

What is a lift bed

What kind of lift-up bed is this? In essence, this is an ordinary bed, which, when assembled in a vertical position, is placed in a closet or chest of drawers. At the moment, furniture manufacturers use the most modern materials, thanks to which such a product will last for many years, and the varied design will help you choose furniture to suit any interior.

This design is called a transformer, because during the day it is an ordinary wardrobe or chest of drawers with shelves, and at night it is a comfortable bed.

Folding furniture can be of two modifications:

Vertical. It is characterized by a vertical arrangement of the berth. This bed model is suitable for people of different heights and weights (can be either a single or a double).
Horizontal. It is distinguished by the longitudinal arrangement of the sleeping bed. Most often used for children's bed models.

Among the features, one more factor can be identified, which is the installation of folding beds together with a mattress specially made to fit. Many manufacturers offer a choice of purchasing similar furniture: just a separate bed or a bed with adjacent niches and shelves. Of course, this equipment costs a little more, but it fits well into the interior.

Pros and cons of lift-up beds

Positive sides:

the most important advantage is the huge space savings;
the upholstery does not get dusty or dirty;
An excellent design solution - economical and elegant.

But there are also certain disadvantages:

this, of course, is the high cost of such structures;
such a bed will also have to be assembled every day in the morning and laid out in the evening (in general, this option is not for the lazy);
there is no way to move it to some other place.

Of course, to save space, you can try to assemble this structure yourself.

DIY folding bed: step-by-step instructions

Let's consider the main stage of its manufacture:

You need to determine for yourself what kind of bed you need - a vertical or horizontal modification.
Indicate what you will need for work: frame, lifting mechanism, orthopedic mattress. Choose the material from which the bed will be assembled (you can take chipboard, MDF or natural wood). The main thing here is that the selected material suits you according to all technical characteristics, that is, it is durable, reliable and environmentally friendly.

Materials that will be needed for the upcoming work:

MDF boards 20 mm thick;
plywood 10 mm thick;
nails;
screws;
fastening loops.

Tools:

yardstick;
pencil;
emery;
drill;
screwdrivers: Phillips and slotted;
corner;
saw;
grinding angle.

After preliminary preparation, we proceed directly to assembly.

The first step is to assemble the frame. It can be in the form of a cabinet or be a separate piece of apartment design. When choosing material for the box, you must remember that in the future you will have to make efforts to lift it along with the bed. Therefore, the wall on which the structure is installed must be concrete in order to withstand the load placed on it.
We attach the box to the wall, based on the upper profile and the axis of rotation of the structure. The thickness of the vertical walls is usually 2.5 centimeters, and the horizontal thickness is from 1.5 to 2.5 centimeters. The box consists of two parts (plinth and shelf for support). The back wall does not need to be attached.
All parts are fastened together with self-tapping screws at a distance of 25 centimeters from each other. The frame must be installed on a flat surface.
To make the bed itself, you need to take two side boards, two backs and a headboard. In order to strengthen the mattress on the bed, special belts are used. For all other parts - mounting angles.
The next stage of assembly is attaching the stock to the frame using a lifting mechanism. It is recommended to use a ready-made version with a gas spring. Using it, you can fix this structure in any position. It is also a good idea to attach an additional fastener to prevent the bed from spontaneously opening. The safety strap is attached to the top of the frame, which holds the folding part through a loop.

Horizontal design

The assembly mechanism of this product is similar to the vertical model.

There is a stock box and a lifting mechanism. Their parameters will differ depending on the size of the mattress and the bed itself.

For installation you need:

four chipboard parts for side (1080 × 394 × 19 mm) and internal items (1080 × 265 × 19 mm);
two wood panels for the bed cover (2020 × 400 × 19 mm) and the shelf (1010 × 400 × 19 mm);
two wood panels for the bottom of the bed (1982 × 390 × 19 mm) and shelves (972 × 390 × 19 mm);
two wood panels for decorating a chest of drawers (980 × 310 × 19 mm);
two bed rails (2000 mm);
cornice (2020 × 992 × 19 mm).

All parts are attached with self-tapping screws. This design is assembled according to the principle of assembling a vertical bed. Side rails 13 cm long are attached along the length of the frame so that the mattress does not move.

Nowadays, the topic of comfortable arrangement of your own home is actively gaining momentum. More compact and stylish sets are beginning to prevail in the furniture solutions market. The reason for this trend is the oversaturation of the market, and accordingly our apartments, with various products, household items and furniture, which are almost crowding out their owners.

A folding bed is the key to saving a lot of free space in the room!

It is not uncommon for your living room or bedroom to not be large enough to accommodate a large dressing table or a wide double bed. But what if you try to combine two or more furniture components in one solution?

Convenient combination of a wardrobe and a bed in a single set.

A folding bed is not new to the furniture market for a long time. Numerous modifications from different manufacturers have filled their niche to capacity. But the price of compactness and technology is by no means small, and besides, all the whims and wishes of the client will not always be taken into account.

This version of a single bed can easily fit even in a very small room.

If you want to protect your wallet from unnecessary expenses and not turn your home into a cluttered warehouse, then a DIY folding bed is your option.

A bed built into the wall will allow you to competently and tastefully save all the free space even in a very small room.

The advantages of self-assembling such a bed are obvious:

reduction in the cost of the product by 2, 3 times in contrast to store-bought analogues;
universal design that takes into account all your needs;
use of known quality materials.

Options for using a folding bed.

Assembly does not require any special construction or engineering skills from you. You just need to follow all the instructions and have minimal experience in assembling accessories to bring this matter to the final result. Prepare all the necessary tools and drawings for more productive work.

Most often, a folding bed is used together with a spacious wardrobe.

A few general notes:

work must be carried out on a flat surface;
do not forget about personal safety equipment;
at each stage of assembly, check the perpendicularity of the corners using a square;
use high-quality, undamaged lumber;
start making a bed only after studying the drawings.

Assembly of the bed should be carried out only after a clear study of the drawings.

There are many models of similar transforming beds. But a do-it-yourself folding bed, the drawings of which only you have, is already a unique exclusive and a highlight of your interior. You determine its design yourself, based on the dimensions of the bedroom.

A stylish folding bed will easily fit into any apartment interior

Such furniture is perfectly complemented by various dressing tables, chests of drawers, drawers or ordinary shelves, technologically built into the design of the cabinet. A variety of decor is responsible for individual style - this element is determined last.

The design of the cabinet behind which the folding bed is hidden

The standard configuration of such models involves the following components:

cabinet frame;
bed base;
lifting mechanism;
decorative elements.

Even children can disassemble and assemble the folding bed.

The seemingly simple design carries with it a number of strength requirements that will directly affect the geometric appearance of the product. Therefore, based on the size of the bed, the frame of the cabinet is designed and the force of the power device is determined.

Standard parameters of a folding bed

All necessary dimensions are displayed on the drawings - dimensional and assembly. Particularly important is the installation drawing of the power element, which is the most important part of our bed. It is also worth paying attention to the cutting of the panels (if you cut the material yourself) and the display of the main fastening points on the drawings.

Option for a folding bed on the podium

Necessary materials

The material for the cabinet and base can be chosen according to your taste and color, the main thing is to take into account all the loads when determining the thickness of the workpiece. It is recommended to use ordinary chipboard - a material that is not picky to use, which will meet all strength requirements and preserve the durability of your mattress. The following dimensions are based on a single bed.

Single bed built into the wall with plenty of storage space.

So, we will need:

2300x400x25 - 2 pcs., cabinet side panels;
1700x400x25 - 2 pcs., top and bottom panels of the cabinet;
1700x150x25 - 2 pcs., reinforcing partitions for the frame;
2050x150x25 - 2 pcs., side panels of the bed base;
1620x150x25 - 2 pcs., bottom and headboard for the base of the bed;
1700x2300x15 – front panel;
lifting mechanism – 2 pcs. (it is better to purchase it in a specialized store, having previously specified the required force to lift the bed and fix it in the desired position).

An option for reliable fastening, due to which the operation of the folding bed will be much longer and more fruitful.

Required accessories:

euroscrews 5x70 – 30 pcs.;
self-tapping screws 4x12;
self-tapping screws 4x22;
corners 20x20 mm, 10 pcs. (furniture);
reinforced corners 60x60, metal;
anchor fastener 10x80 mm;
powerful magnetic latch to secure the bed in the raised position;
hidden legs for the bed;
decorative elements for facade decoration.

You can choose the option of legs for a folding bed that will suit you best.

Necessary tool

roulette;
angle with measuring ruler;
level, half a meter long;
pencil;
fine sandpaper;
adjustable wrench;
perforator with a minimum drill diameter of 10 mm;
wood drills 5 and 8 mm;
screwdriver;
protective glasses;
jigsaw

The folding bed can easily be transformed into a comfortable sofa.

Step 1: assembly of the frame and strength elements of the box

Before starting assembly, level the walls and floor - maximum deviations should not exceed 5 mm per meter of length. The process begins with making the box. Since the side panels are overhead parts, they are drilled into a plane with a diameter of 8 mm.

Drawing of a single folding bed

The remaining elements of the box are internal, and accordingly they are drilled into the end. The entire box is tightened with Euroscrews. To absorb the load that occurs when raising and lowering the bed, two stiffening ribs will be sufficient. They should be located at a distance of 700 mm from the base and top. There is also an option with built-in shelves inside the cabinet body, which can also act as reinforcing elements. Having carefully marked and installed the fixed parts of the lifting device on the side panels, do not forget to check the structure for mutual perpendicularity.

If making a folding bed with your own hands turns out to be difficult for you, then at any time you can order this custom-made furniture option.

Step 2: Bed Base Assembly Step

When designing a closet, they usually take into account the size of the bed, which, in turn, depends on the dimensions of the mattress. Using corners and 4x22 screws, we assemble two side walls and two backs into one frame. We fasten the front panel with 4x12 self-tapping screws to the furniture corners.

Choose high-quality materials for your folding bed that will provide it with a stylish appearance.

There is one important nuance in this matter- You need to start fastening the wall at 4 corners, and only then, aligning it on all sides, fix it completely. Thus, possible distortion is eliminated. At the headboard, having previously marked it, secure the reciprocal movable part of the lifting mechanism. To secure the mattress to the bed, use strong straps.

Folding transformable bed that turns into a sofa.

Step 3: the stage of installing the box and securing the power mechanism

We install the box on a flat floor or on wooden blocks. At the location where the frame is installed, cut off the plinth. The box should only be secured to a strong concrete wall. The rotation axis of the mechanism and the upper horizontal are selected as the base. Here we use only reinforced corners and anchor bolts, since the main forces will be perceived in these places.

Wood is often used as a material for making a folding bed

The connection of the box and the bed occurs by joining the mating parts of the power device. For proper operation of the structure, namely its fixation in any position, it is recommended to use a power mechanism based on a gas spring.

Simple DIY folding bed design.

At this stage, the work is almost complete, and you can be proud of such an achievement as a DIY bed. The folding system is installed and functions perfectly. Secure the mattress with strong straps.

A small children's folding bed easily turns into a work area with a comfortable table.

The final stage is decoration

The facade of the final product is often decorated with false doors - an overhead element that is part of the decoration, onto which handles are attached. Do not use mirrors in such beds under any circumstances, as they are not designed for such loads and may soon crack.

Even the simplest folding bed design can fit into any room interior.

This will also affect the weight of the structure being lifted, which may affect the durability of the mechanism. Be sure to install the legs into the pre-drilled holes and magnetic latches. Now the work is completed, and the new decoration of your interior is completely ready for your relaxation.

A single folding bed can be installed in the front room, and no one outside will even think about its presence, since it will be disguised as a closet.