Bench made of polypropylene pipes. Crafts made from polypropylene pipes or LEGO for adults. How to use leftover polypropylene pipe materials in the garden

Any craftsman who has experience in handling household tools can make a chair from PVC pipes with his own hands. Made from polymer material the furniture is durable, light, elegant, comfortable, resistant to dampness and solar radiation. Products made from plastic pipes have a long service life and are used at any time of the year both indoors and outdoors.

Similar articles:

Types of PVC chairs

IN trading network products manufactured according to various technologies. Pipes are designed to create a water supply or sewer system, so they differ in connection methods. The specifics are as follows:

1. Designs from polypropylene pipes joined using a soldering unit. After welding they become monolithic. Using threaded fittings, the furniture is made dismountable. This solution allows you to transport it in the trunk passenger car or carry it in a small bag.
2. Do-it-yourself chairs from PVC pipes are assembled by gluing fragments or inserting them into couplings. This method is simple and does not require the use special equipment. The use of products with couplings and cuffs makes it possible to create collapsible chairs with the possibility of temporarily weighing them with bulk materials.
3. Stools made from plastic pipes are made in various colors. The blanks themselves have different shades (white, gray, black, orange). Furniture can be covered acrylic paint. This decision is made when the master wants to quickly get rid of the applied markings.

By design, PVC chairs can look like this:

• only legs and seat;
• with straight or inclined back;
• with armrests;
• with separate or combined legs.

Required tools and materials

Before making a chair from plastic, you need to purchase the necessary equipment and property for this.

To work you will need the following tools:

1. tape measure or pipe cutters;
2. hacksaw for metal;
3. oil level;
4. screwdriver;
5. special soldering iron;
6. drill or screwdriver;
7. stapler;
8. marker.

The materials needed are:

• PVC pipes;
• wood screws;
• fittings (corners, tees, plugs, contours, crosses);
• plywood 8-10 mm;
• foam rubber 50 mm;
• upholstery fabric;
• thick tarpaulin.

The number of fittings and pipe footage depends on the chosen design and construction. The seat can be made of thin tubes, strips of tarpaulin or foam rubber attached to plywood.

Calculations and drawings

You can design a chair from pipes on a sheet of paper or personal computer. Complex calculations there is no need to do this, since the products have a simple design.

When planning your work, you should consider the following nuances:

1. Using the curvature factor. Curved fragments look more interesting and attractive than straight links. A chair with a sloping back will fit better into any interior. You can give the workpiece a curved shape by slowly heating it over open flame. Then it is carefully bent and fixed until it cools completely. Another way is to use factory-made contours.
2. The length of the pipes is selected taking into account the fact that part of the workpiece will be immersed in the fitting. This distance is 20-50 mm depending on the type of plastic pipes. Before drawing up the drawing you need empirically measure how far the links fit into the coupling opening.
3. It is better to take a sample that is comfortable to sit on as a basis for the project. You can supplement it with your own ideas. Please note that plastic bends under pressure. To increase strength finished product Transverse ties are provided on the legs and seat. Reinforced plastic is much more practical than analogues without aluminum inserts.
4. The diagram is drawn to scale with an accuracy of 1 mm. It displays all the details, places and order of joining of workpieces to each other, couplers and partitions. An option is provided for cutting blanks, in which the amount of waste will be minimal.
5. If the workpieces are joined without glue or soldering, then the joint must be strengthened. To do this, screws are used, which are screwed in so that they tighten and fix both fragments. It is better to screw in hardware on the underside of the pipe and from the back. This way they will be practically invisible.

The finished diagram is the basis for carrying out calculations of building materials.

What do you do with old furniture?

Poll Options are limited because JavaScript is disabled in your browser.

As a rule, after replacing or constructing a water supply system, plastic pipes and fittings often remain. Of course, such material is no longer suitable for reassembling communication networks, but it can be used for the manufacture of various decorative crafts and practical things.

If you wish and have free time, you can make a chair from polypropylene pipes with your own hands - the assembly technology is very simple and anyone can do it home handyman. Do you want to collect original furniture but don't know where to start? We will help you realize your plans.

The article describes in detail three technologies for making various crafts. By following the instructions, you can assemble it yourself high chair, kitchen stool and portable fisherman's chair.

There is something attractive about furniture made from scrap materials. Thus, plastic pipes make it possible to produce structures with ideal geometric shapes. They will add zest to the interior of the room. In addition, the owner of such furniture will have an excellent chance to show off to his friends the masterpiece he created with his own hands.

Chairs made of plastic pipes have the following advantages:

• ease;
• compactness;
• strength;
• ease of manufacture.

And the most important thing is that you can build them with your own hands in a relatively short time. This will require minimum set tools and materials, and a little patience.

You need to start making a chair from polypropylene by choosing the design of the product and its design implementation. In this case, you need to start from the function that the furniture will perform.

If there are a lot of pipe scraps left, then you can use them to build a chic creative chair or bar stool. To fasten parts together, it is not necessary to have a soldering iron; this can be done using special glue

Having decided on this, we begin to select product parameters: size future design, its type (collapsible or solid), the method of connecting parts. You need to draw a rough sketch of the future product in order to understand how much and what kind of material will be needed for the work.

The design of PVC chairs is limited only by human imagination. To get ideas, you can look through interior design magazines or furniture catalogs. You don’t have to look only at plastic products; you can get ideas by looking at furniture made from any material.

Stools made of plastic pipes can be placed in the kitchen, country veranda, garage, and just in the yard - everywhere they will look stylish and original.

For trips to barbecues or fishing, you can build folding chairs that are convenient to store and transport when folded, and they do not take up much storage space.

You can make comfortable and bright chairs for children by covering a frame made of polypropylene pipes with brightly colored fabric.

The process of constructing a chair

Anyone can create an original chair from plastic pipes home craftsman or craftswoman. To work, you will need a minimum set of tools, which are likely to be found in every home and, of course, the remains of polypropylene pipes.

Step 1 - design of the future chair

At the first stage, you have to decide on the purpose of the chair and its design. If you decide to make a bright high chair for a child, you should definitely take into account the height of the little owner.

If you plan to use the stool in the kitchen or cottage, in order not to make a mistake with the size, be sure to measure the height of the existing furniture.

For those who first decided to try themselves in this creative and creative work, perhaps it is worth starting with making the simplest design - a stool. This does not require a lot of skills and materials, and once you have completed this task, you can begin to manufacture more complex structures.

Image gallery

Cut a piece of fabric 18 cm wide. It is better to opt for dense material with water-repellent impregnation. A piece of tarpaulin may also work

Using reinforced thread, sew along the narrow sides of the rectangle to create holes for the pipes. If threads are fraying from the fabric, it is better to tuck it in and stitch it on all sides, but allowances must be taken into account even before the fabric is cut

Not very long ago, PVC works appeared on the market in our country, which are intended for installation plumbing equipment. But our craftsmen were able to come up with a completely different use for them - they are used to make various things for the home and garden. Today we will tell you how to make a chair from PVC pipes.
It is fashionable to make chairs from PVC pipes different types, both for children and adults. The only difference is the increase in size in preparation for assembling a chair for an adult. These chairs are very easy to assemble; you don't need any special knowledge.

The only thing you need is the simplest tool and a little imagination.
What to prepare first:
PVC pipe – 3 meters;
Elbow 90 – 8 pieces;
T-shaped connections – 6 pieces;
Adhesive for PVC products;
Metal file;

The material from which the chair seat will be made.

For a small chair for a child up to two years old we need:
A – length 25 cm. – 7 pcs.

B – length 13 cm. – 4 pcs.
C – length 10 cm. – 4 pcs.

D – length 15 cm. – 2 pcs.

Chair for a child aged 4 years:
A – length 33 cm. – 7 pcs.
B – length 20 cm. – 4 pcs.
C – length 13 cm. – 4 pcs.
D – length 18 cm. – 2 pcs.

Chair for a seven year old child:
A – length 41 cm. – 7 pcs.
B – length 25.5 cm. – 4 pcs.
C – length 13 cm. – 4 pcs.
D – length 23cm. - 2 pcs.

The parts under the letter "A" determine the width and depth of the seat.
The length of the pipes “B” determines the height of the seat from the ground.
Details under the number “C” are the height of the armrests, and under the number “D” the height of the backrest.

All tubes under the letter:

A - means the depth and width of the seat.
B is the distance of the seat from the surface.
C – this is the height of the armrests.
D – Determines the height of the backrest.

DIY chair made from PVC pipes

For big man We calculate the height and depth individually, but approximately these can be the following indicators: seat height - 45 cm, depth 47-53 cm, width 50-55 cm.
All parts must be cut with a hacksaw to the specified dimensions. If you are assembling a chair for the first time, then you should not use quick-drying glue, since you will need to work very quickly and not make any mistakes - redoing it later will not work.

Assembly should begin from the back, and as assembly progresses, add the necessary parts to it.
Tip: to make it clear how to assemble a chair, assemble it without using glue, like a construction set. Then carefully disassemble, placing all the parts in the required sequence, and after that start gluing the parts.

It is important to prepare the fabric for the seat right away, since it is stretched during the assembly process. Otherwise, we do not glue the front transverse pipe of the seat and the upper transverse pipe, leaving the opportunity to disassemble and tension the material.
For the seat, you need to take a dense material, first sew a strip to the size of a chaise lounge. There should be special borders sewn along the edges, into which the pipes of the seat and back will need to be threaded.

Although there is another option, in order for the material to be easily removed and washed, you can fasten it with buttons or with a zipper. Although you can come up with your own design for the seat and back of the chair, you can, for example, completely cover it and get a small chair. Of course, this will take a lot more time, but the result will please both you and your child.

Increasingly, it pleases with unusual innovations, expanding the traditional perception of things. So today we present to your attention a homemade stool made from PVC pipes, which any craftsman can make. Go!

Materials:

• PVC pipe, diameter 25-32 mm;
• Fittings: cross – 2 pcs, straight connecting tee – 8 pcs, plug without thread – 8 pcs;
• Plywood, thickness 10-16 mm;
• Self-tapping screws for fastening the bench;
• Varnish or paint on wood.

Tools:

• Soldering iron for PVC pipes;
• Jigsaw;
• Screwdriver or Phillips screwdriver;
• Sandpaper or grinder;
• Plumbing scissors or hacksaw;
• Painting knife;
• Tape measure, pencil or marker.

The procedure for assembling a stool from plastic pipes

Soldering the crosspieces

The basis of our stool will be two equal-sized crosspieces, which will serve as the upper and lower drawers. For one crosspiece you will need the following fittings: crosspiece - 1 pc., connecting tee - 4 pcs., a piece of pipe under the drawer - 4 pcs. The length of the pipe is measured experimentally, taking into account the distance for soldering.
The finished cross should be square, and its size should be smaller size banquettes a few centimeters on each side. Soldering is done with a plumbing soldering iron, waiting the optimal time for the selected pipe diameter.
The most even cut of PVC pipes is obtained with specialized scissors. However, this tool may not be available to everyone. You can replace it with a hacksaw for metal, trimming the curvature of the cut with a paint knife. It also removes burrs for better soldering.
Advice!
The cost of PVC pipes differs depending on the quality, manufacturer and purpose. For example, pipes for hot water supply are much more expensive than for cold water. For similar products, it is not the type of pipe that matters, but high-quality and reliable soldering.

Making a stool frame

Using sections of PVC pipes of the same diameter, we assemble both crosspieces together, making the frame of the stool. Can be accepted general dimensions, which the author of the video sets in his product.
The advantage of PVC pipes as a material is that if the size selection is inaccurate, you can always solder or, conversely, cut the pipe to length. In our case, it is worth considering the presence of plugs on both sides of the frame. They can be soldered through small sections of pipe, thereby adjusting the height of our stool.

We make a banquette

The seat of a stool is called a banquette. We make it from a square piece of plywood. The usual size of a stool bench is 30-35cm. we cut it out with a jigsaw or hacksaw, turning the edges to the correct radius. Using sandpaper or a grinder, we process the ribs and sawn edges around the entire perimeter.
We mark four holes for screws for attaching the bench to the frame. We slightly countersink the holes from the front part so that the heads of the screws do not stick out outside. We drill holes with a screwdriver or drill. The banquette is almost ready. For longer-term use, it can be painted or varnished.

Assembling a stool

We align the stool frame exactly at the centers of the holes. We attach the screws by hand and tighten them with a screwdriver or screwdriver. We check the stability of the stool so that all legs are even.

We did it excellent example country furniture, which thanks modern materials, will serve faithfully for decades. The cost of components is quite low, and many craftsmen generally have them as reserves in deep stock. We offer you a wonderful way to use them for the benefit of your business and household, because that is essentially what they are needed for. Good luck and good mood to all masters!

After repair or construction work there is a lot of material left. Lovers of handmade items will no doubt find a use for them. After repair work In the bathroom, you can easily make furniture from PVC pipes with your own hands, using leftover materials.

Depending on the type of furniture that you plan to make, the set of materials and tools may vary. But basically the following tools will be required for the job:

• perforator;
• screwdriver;
• hacksaw;
• scissors or knife.

Materials required for work:

• pipe cutting;
• glue;
• connecting elements of different shapes;
• stubs.

To make furniture look more beautiful, paint is useful. Beds, tables, shelves can be painted in the color you like. For beds in the children's room, choose delicate pink, blue, bright orange, yellow shades.

PVC materials

Soldering iron for welding plastic pipes

Variety of types of plastic pipes

Types of plastic pipe connections

Stages of the plastic pipe welding process

Manufacturing and assembly process

Below are the diagrams and drawings necessary for making furniture from pipes. With their help you can make armchairs, chairs, beds, shelves, tables, a huge number decorative elements. The products are interesting, durable and safe.

Armchair

An original way to use plastic pipes is to make a chair out of them. There are many options for making it. It all depends on the desire, capabilities and imagination of the master. Plastic pipelines can become material for making a chair. You can do it using pvc pipes, knife and glue.

To get an unusual chair, you need to do the following:

• First, cut pieces of different lengths. The main thing is that the longest segments should be the same length. They will act as supports;
• long ones will be needed for the backrest and armrests;
• Then the segments are glued together so that the surface of the armrests and backrest is at the same level. Towards the bottom, the length of the segments changes.

Thus, we get an interesting chair that will decorate any room in the house. To make it even more comfortable, pillows are placed on it or covered with foam fabric. You can have a good time in such a chair, read a book, watch TV.

The parts under the letter "A" determine the width and depth of the seat. The length of the pipes “B” determines the height of the seat from the ground. Details under the number “C” are the height of the armrests, and under the number “D” the height of the backrest.

Using the method described above, a table and a bed are made. The different sections are glued together to form the base of the bed. On top of it you need to put a comfortable mattress, pillows, and blanket. This is quite appropriate place for sleep and relaxation.

In addition, cribs are made from this material. To do this, you need to study diagrams and drawings. Then prepare the right size segments. They are connected using fittings. If you fasten the parts together with glue, they will be very strong and durable. Without the use of glue, the structure will be collapsible and can be removed at any time. A crib for a baby will be unusual, reliable and durable. If there is more than one child in a family, you can make several beds.

Another option sleeping place for two children from PVC pipes – bunk bed made of polyvinyl chloride, photo. It’s not difficult to make, you just need a drawing or diagram. Following the instructions, you can create various options beds: single or double, bunk.

Table

You can make such furniture from polypropylene pipes with your own hands, like a table. Its frame will be made of pipes, and the tabletop will be made of any other material. At the same time, it must be remembered that PVC pipes are not suitable for heavy loads. The lighter the countertop, the better.

The size of the table top in this case will be 91.5 x 203 cm. You will need following materials, tools:

• door leaf as a tabletop;
• fasteners for connecting parts;
• drill;
• saw.

You will also need pieces of size:

• 30 cm – 10 pcs;
• 7.5 cm – 5 pcs;
• 50 cm – 4 pcs;
• 75 cm – 4 pcs.

To assemble the frame, prepare:

• t-shaped fittings – 4 pcs;
• plugs for pipes, fittings – 10 pcs;
• 4-sided fitting – 4 pcs;
• cross fitting – 2 pcs.

According to the diagram, assemble first side elements. Then move on to the back of the table. Pay attention to the stability of the structure. All details must be the same.

The last thing is to assemble all the elements into one structure. Inspect the product for unevenness and sharp parts. Process everything carefully, glue the connections. So in a simple way a table is made.

Tool

Materials

Preparing parts of the required size

Connecting fragments

Rack

Armchairs, beds, tables - this is not the entire list of products that can be made from this material. Another useful interior item is a shelving unit. Design parameters can be very different. It all depends on the size of the room where it will be installed and the wishes of the master.

First of all, it is recommended to make a drawing, a diagram of the future product. Next, prepare for them required amount a certain size of parts. Connect everything together. The base of the shelves can be plywood or other material. The only thing we must not forget is that the materials are not suitable for heavy loads.

Such racks are used for flowers and toys in a children's room. Shelving can be installed in the garage. There, the products will be a great place to store tools and other things. Can be placed on shelves garden tools: pots, tools. PVC products look unusual, neat, and do not require additional decoration. Plastic shelves, the racks do not harm the health of others, they are durable and environmentally friendly.

The nuances of working with the material

Models from water pipes They turn out to be unusual and original. They decorate the room garden plot. Plastic furniture, made with your own hands, will add zest to the interior and attract the attention of guests.

Furniture is made from plastic pipes. Two types of materials are used in production: polypropylene (PP) and polyvinyl chloride (PVC). Each of them has its own characteristics and is suitable for the production of different products. Polyvinyl chloride is a cheaper material. It is more often used for sewer pipes. Its advantages include:

• strength and durability;
• ease of installation;
• low cost.

The disadvantage of PVC is that when exposed to high temperature water, the pipes begin to deform. In contrast, products made of polypropylene are not subject to change in shape when high temperature water. They are able to withstand liquid heating up to 60 degrees, and even more if the pipe is reinforced.

Both materials are equally suitable for making furniture. In addition, there are a huge variety of items that are made from scraps. These are shelves, stands, mirror frames and more. The furniture is easy to assemble. The structure consists of pipes and fittings, the elements are also glued together. Even a beginner can make pieces of furniture from PVC pipes with his own hands.

How to bend a pipe

Products made from this material look unusual. They will look even more interesting if they consist of curved parts. For example, a table with curved legs. In addition, pipes are used to make various elements decor that come in different shape. In such cases, bending the pipe is simply necessary.

For this you will need:

• funnel;
• sand;
• scotch;
• plate;
• metal containers;
• gloves;
• saw (hacksaw);
• knife (scissors);
• sandpaper;
• a device for bending pipes (there are different types, mostly improvised materials are used).

The process looks like this:

• cut a piece of the required length;
• cover one end with tape;
• using a funnel, pour in as much sand as will fit;
• heat a measured amount of sand in a metal container;
• put on protective gloves for safety, carefully pour sand into the pipe through a funnel;
• Seal the other end with tape, then the sand will not spill out during the bending process;
• leave it for a while, it will warm up from the inside;
• when it warms up, start bending;
• give the pipe the desired shape;
• at the end of the work, tear off the tape and pour out the sand;
• When the pipe cools down, it will be in the required shape.

One edge of the pipe is sealed with tape

Use a funnel to pour sand into the pipe.

After measuring the required volume of sand, pour it into a metal bowl and warm it well

Using the same funnel, pour the prepared sand back into the pipe.

Cover the other end of the pipe with tape. This is necessary so that the sand does not spill out during work.

Leave the pipe like this for a couple of minutes. During this time it will warm up from the inside. The material will become soft and pliable.

While the sand is still hot, you can give the cut piece of pipe the bend or shape you need. After this, remove the tape and pour the sand back.

Decoration

One of the options for decorating furniture from pipes is to use different color material. Table with legs of blue color will become bright element in room. Products come different colors: white, black, blue, blue, yellow. There are also connecting elements different shades. Thus, the pipes will be one color, and the fasteners will be another. Combinations of white and blue or black and red look beautiful.

If we're talking about about armchairs, chairs, they are decorated with decorative pillows. The foam lining on the back and seat is covered with a beautiful bright fabric. Decorative pillows decorate the product, make it cozy, comfortable, original. They come with embroidery, buttons or tassels. The color range of pillows is varied. When choosing it, it is necessary to take into account the overall design of the entire room.

Children's furniture should be interesting and colorful. It is recommended to cover the chair or high chair with durable fabric with a bright pattern. It could be a cartoon character toy cars, dolls, stars and much more. Please pay Special attention For furniture made from PVC pipes for children, it must be safe, without sharp elements. Otherwise, the kids may get hurt.

Making furniture from PVC pipes is easy. It will become a highlight in the room and will attract the attention of guests. Plastic pipes They are inexpensive, so you can save a lot cash, because New furniture it costs expensive.