Make a phone stand from curly wire. How to make a stand for a phone or smartphone at home. Temporary cardboard option

In our progressive times, it is difficult to meet a person who does not have a mobile phone. Even when sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, as well as watching videos and much more. Often, an owner who wants to have a phone always at hand wants to place it in a convenient way. Various expensive holders are offered in stores, but from our article you will find out what you can make from

Stationery binders

Surely those who study or work in an office will have several office clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 and even large quantity binders. Some craftsmen assemble three-dimensional structures from a variety of various sizes clip. But such stands look bulky and are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a curved ear will be enough to support a mobile device.

You can build another structure from the same binders by placing the clamps opposite each other so that the ears point to the sides. The telephone is inserted into these ends, like into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

We use pencils

If you don’t have any binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this structure, prepare 4 erasers and 6 pencils. In fact, you need to collect a volumetric geometric figure- tetrahedron. The principle is that you need to fasten two pencils with an elastic band, and insert the third between the turns. It is recommended to use pencils with an eraser at the end to prevent slipping on the table and provide a stronger grip on the phone.

Bottle models

IN household we use a variety of cleaning and detergents. Most of them are contained in plastic container. It can be used as a mobile device holder. Let’s look further at how to make a phone stand out of a bottle.

The type of device will depend on the shape of the container. This could be containers for shampoo, shower gel, cleaning products and others. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your own discretion. On the opposite area of ​​the bottle, cut a hole corresponding to the parameters charger. You should end up with a piece that resembles a handbag or pocket with a handle. Place the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and there will be no risk of crushing it. You learned another way - how to make a phone stand. If desired, this holder can be painted or covered with beautiful paper or fabric.

Paper clips

The simplest and affordable option The stands are just a regular metal clip. It must be bent into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design holds up well mobile phone, without interfering with watching the video at all.

Cardboard and plastic cards

How to make a phone stand out of cardboard? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a figure as shown in the photo below. The fold line must remain intact. Having opened the part, you will see that you have a comfortable and stable stand for your phone.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. It is very easy to make such a device at home. Step back 1 cm from the edge of the card and bend the piece along the short side. Fold the remaining part of the card in half reverse side. You will get a zigzag shape. Place the phone on the resulting ledge. The stand is ready.

Unusual coasters made from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned over with the arms up, which, in turn, need to be crossed. Mobile device located between the frame frame and the temples that hold the phone.

How to make a phone stand from children's construction set? In this case, everything depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks various shapes. A stand made of parts can hold the phone in both vertical and horizontal positions. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep your phone in vertical position- old cassette player. It is necessary to open it and tilt the lid back, thereby turning the box inside out. You can place your communication device in the hole that once served as a pocket for an audio cassette. The convenience of the stand is that it is quite durable and transparent, and does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest objects that can be found in every home, you can make such a useful thing like a phone stand.

How often, when we are at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. Ours will tell you how to do this. step by step wizard Class.

How to make a phone stand with your own hands: options for the office and car

Whether at work or in the car, we all need to be connected at all times. At the same time, you don’t want to spend a lot of money on expensive stands, because they can be made from waste and used materials.

The simplest version of a phone holder is a card stand. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, without allowing it to break.

Experience shows that a plastic card stand is very reliable and can even withstand air travel during severe turbulence.

To make a phone stand from paper clips or binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and the resulting structure should be placed on the table so that the clamp bigger size rested on its surface.

Similar coasters can be made in five minutes from clothespins.

Paper clips make great option car stands. To make it, you need to disassemble the clamp big size and bend the metal parts slightly as shown in the photo below.

To avoid damaging the surface of the phone metal fastenings It is recommended to wrap the threads in several layers. We return the holders to their place, additionally securing them with adhesive tape and a rubber band. We attach the clip to the ventilation blinds. The phone is securely attached between the metal parts of the binder.

Regular office paper, folded in a certain way, can even withstand the weight of a large smartphone. To make a paper stand, you need to measure the dimensions of the phone and adjust the pattern below to fit them.

Cut the piece out of paper, fold it along the dotted lines and insert the side parts into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for stands for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of your home. Let's consider options for such products.

A phone stand made from newspaper tubes will be a wonderful gift and an excellent decoration for any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of approximately 1-1.5 cm and firmly fix them in the machine or in any convenient way. We place knitting needles or wire in the outer racks to make it more convenient to form smooth and neat contours of the product. We begin to braid the base with a working tube using the rope technique or calico weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

We weave a rectangular piece of the required length. We take out the knitting needles or wire. The ends of the racks are carefully tucked in and trimmed. We give the workpiece the required curved shape, if necessary, wetting it a little with water.

Similarly, we weave the leg of the stand using fewer tubes. We bend the finished leg, install it on the main part and secure its posts between the rows of the stand. We cut off the excess and hide it. We coat the product with glue, if desired, additionally paint it and cover it with 1-2 layers of varnish. After completely dry The stand can be used for its intended purpose.

Modular origami is a fairly young, but very popular type of needlework. With its help, you can make many unusual and original gizmos, including a phone stand from modules.

To make a stand you will need double-sided blue and Pink colour. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. It will require 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we place one pink module in the middle.

In the eighth row we put 6 modules, make a skip, another 10 modules, skip, 6 modules. The number of pink modules is 2 pieces. In the next row, we place three pink modules on the pink section. We begin to design the shaped edging of the stand, as shown in the photo below.

In the back part we form a heart-shaped pattern, above which we install a number of modules blue color. Gradually narrow the stand until a triangular wedge forms at its back.

The module stand is ready!

Video on the topic of the article

We invite you to watch the video tutorials below on how to make other options for phone stands.

The mobile phone has become an invariable attribute modern man. And on the road, and at home, and on the desktop useful gadget they assign the main place, otherwise “suddenly someone will call, but I won’t hear/see.” To conveniently place a cell phone on a table, stands were invented. You can buy them in the store, or you can make them yourself from scrap materials. Even the most useless at first glance “unnecessary garbage”, like cardboard packaging for dairy products or a long-used CD cover, can be useful in your work.

Cardboard stand

The first option is to make a mobile stand out of cardboard. This does not have to be a solid piece of material; you can take a used small-volume milk carton (0.5 ml). There is no need to glue anything: you only need scissors.

The box must be thoroughly washed, crumpled and the bottom cut off. Then cut it along the folds.

The work will require a central part in the shape of two rectangles. There is a fold between them. It needs to be cut and folded outside inward, pressing the bend with one hand.

Starting from the opposite end, from the bottom, you need to cut out a shape that resembles the letter “T”. It is narrowed at the top, but has a beveled corner.

When the figure is unfolded, the bottom edges become where the phone sits. It rests on the central edge. The budget stand is ready!

CD cover stand

Surely everyone has a couple of DVDs lying around their house. One of the unnecessary covers can be turned into a stand for your mobile phone.

To do this, the cover must be cut in half. Then cut off all the holes and rivets so that only a smooth rectangle with two curved corners at the ends remains.

The plate must be clamped with tweezers or pliers and placed in boiling water. This will make the plastic soft and pliable.

Holding the plate with pliers or any other tool, it must be bent so that one of the corner ends does not reach the other slightly. 2-3 cm is enough; the phone will be located in this space. One of the corners is glued to the surface. The result is an interesting and light stand. The device can be placed on it both vertically and horizontally!

Paper clip stand

Mobile phone stand made from paper clips – interesting thing, which can be done in 2 minutes. To do this, you need a large, massive paper clip, which you just need to straighten correctly!

To begin, the wire is completely straightened into a line. Then you need to pinch it and bend it again:

1. Bend in the shape of a tick - U.
2. Bend both ends at an angle of 90 ° C, starting approximately in the middle.
3. Bend the ends of each end slightly.

Thus, an ordinary paper clip turned into a laconic stand. The phone lies horizontally on it.

Stand made from toilet paper roll

As good as a sleeve from a used roll toilet paper, enough in every home! Don’t rush to throw away the cardboard form – it can be turned into a mobile phone stand in a matter of minutes.

All that is required is to correctly cut part of the sleeve at an angle. There should be a small piece of cardboard left in front to create a stop. Such a stand will not be able to accommodate a phone that is too tall, but standard size“fits” perfectly.

If desired, the stand can be decorated: painted, wrapped in fabric or covered with paper for gifts. And no one will believe that it was once part of a toilet roll.

Conclusion:

When working with familiar things, it is important to give free rein to your imagination: try it on, think, experiment. Then stands for mobile phones will appear in the house regularly - and always different and interesting!

Big and big for everyone ardent hello! I haven’t written in the “DIY” section for a long time. Regular readers have probably forgotten that such a thing exists. But oh well, today I will improve. And I will share with you very cool ideas how to make a phone stand with your own hands.

Lately I've been reading a lot, studying information, watching videos. But holding the phone in your hands is not very convenient. And it happens that, for example, I’m preparing food, cutting food, and I have to prop up my phone with whatever comes to hand. And suddenly the idea came to me, why not buy a stand at the store that will make my life much easier. Having scoured the Internet, finding the answer to the question of what it costs and what it costs, I came across a photograph that showed that very thing, but made in seconds and with my own hands. Then the idea sparked in my head to put together several inspiring ideas. And in the end, I hope, an interesting post was born. So, let's begin!

I suggest starting with the very best option for a paper phone stand. You can build it at any time and anywhere, the main thing is to have a sheet of paper approximately A4 size on hand. It seems to me that students and schoolchildren will like this idea. Main principle here is to take a sheet of paper, preferably thick, fold it lengthwise to make at least 3 layers, but of course everything depends on the width. Then you need to fold the paper again, making folds across it so that 3 wide edges of the same width and one small one are formed. Look at the photo, it clearly shows what the end result should be. The last step is to make two small folds.

I can’t even imagine who could have such a rarity as a box of tape cassettes for a tape recorder. But it turns out that such an object, seemingly completely useless, can be used. In a couple of seconds, by turning it over in a certain way (see photo), you will get a very cool stand for your smartphone. Moreover, if you paint it with paint from a bottle, then few will guess what it is made of.

If you have several DIY kits lying around at home, then it is quite possible to build a structure to hold your phone in a horizontal position. And this is done in a matter of minutes. And it’s also easy to disassemble it, putting it back in place.

A plastic card as a phone stand? The idea is bold, but quite realistic. All you need is a couple of cards and some strong scissors. Trim the parts as shown in the photo and enjoy watching the video, taking photos and reading e-books.

The next way to make your life easier is to stock up on six pencils and four erasers. Basically, you need to make a three-dimensional figure, as shown in the picture. Start with a simple triangle, then add one edge at a time, securing it all with rubber bands. Get an original delivery for the phone.

Having a couple of wooden pieces in the house, it is possible to make an interesting and original, and most importantly durable device for smartphones. You can glue the parts with hot or universal polymer glue. And indeed, this design will serve you for a very long time.

Here are some more lifehacks for your phone to keep it running while charging. Such devices are needed mainly when there is simply nowhere to put the gadget unless there is a table or cabinet nearby. Such holders are made from plastic bottle, as in the first case, or from thick cardboard, as in the second.

I've seen so many ideas with toilet paper rolls, but this one! You will need the sleeve itself and 4 paper buttons (to be honest, I don’t know what they are called correctly). Attach them as legs, cut a hole at the top to size so that you can put your phone through it, and enjoy the result. It is better, of course, to decorate such a stand with something or simply paint it.

As you already understand, making a phone stand out of paper is the easiest option. So, you will need a piece of very thick cardboard. If there is none, then make it from several layers, gluing them to each other. Cut holes in the part as shown in the picture. Moreover, such a holder is suitable not only for smartphones, but also for tablets.

Well, the very last way I suggested to make a phone stand with your own hands is to use stationery clip. I’m sure everyone will have it, and if not, then it’s not very expensive in stores. Take a couple of these devices and bend one round part of the paper clip inward. It will serve as a barrier for the phone to prevent it from rolling off. Place one binder inside another. Place the smartphone so that it rests on one ear, and the second one is bent towards the screen. Here's a simple holder for you!

That's all for today, I hope you liked the ideas and were inspired to make one of the presented gizmos! See you again!

You can make a small phone stand with your own hands from the most simple materials. Our small master class will help you in your work. Handmade things bring warmth and comfort to your home.

This funny cat phone stand is easy to make in one evening. To do this, we will need fabric from old jeans to trim the cup, denim or any other fabric for the head, legs and tail.

To work you will need:

1. Denim (stripes of different colors).
2. A piece of bright fabric for a scarf.
3. A little padding polyester or cotton wool for the paws, tail and head.
4. A glass of cotton swabs.
5. Cardboard for the bottom.
6. 4 buttons.
7. Pencil, scissors, needle.

Let's get started:

Take a piece of paper and draw a pattern by hand. It's quite simple, even if you don't know how to draw. You can do the head like this: circle the bottom of your glass from under the cotton swabs and step back a little from the edge. You will get the head of a cat. Cut out the pattern from paper. We will cut according to it:

• Head (with ears) – 2 parts,
• paw-hand - 4 parts,
• paw-leg – 4 parts,
• tail – 2 parts.

We select materials:

This is the box you need to take for work, it’s just the perfect size:

Next, we will make the bottoms for our stand. In this chopstick cup, the bottom diameter is 8 cm. Yours may be different. For the outer bottom, cut out a larger circle of cardboard, and for the inner one, 0.5 cm smaller than the bottom of the stick glass. We cut out a circle with a diameter of 7.5 cm from denim fabric. We sew it along the edge with thread, insert cardboard and tighten the thread. The second circle is 1.5 cm larger, cut out of denim.

For the inside of the stand, take a suitable fabric measuring 12 cm (height of the glass + allowances on each side of 2 cm) * 27 cm (circumference length + allowances of 1 cm). Sew the fabric along the short side. We trim the allowances at the bottom of the resulting lining in several places. We put the inner lining into the cup, distribute the notched allowances so that there are no large folds. You can drop a little glue so that the lining does not “walk.”

We turn the top seam allowance onto the outside of the stand. We also secure it by dripping glue in a circle. If glue is not available, use tape. Then we need to design the cat's belly. Scraps from pant legs work well for tops and bottoms. Lay out the strips and secure them with pins.

Sew all the pieces along the short side. We put everything we sewed on our stand. On top of the cup we sew the lining and the top of the product with a hidden seam. Then we sew on the large bottom. Make sure it does not protrude beyond the diameter of the glass. If the bottom is large, trim off the excess cardboard.

Place the cat pattern on the fabric from which you decided to sew it. Cut out the pattern from paper and pin it to the fabric. Cut it out, adding a seam allowance of 0.5 cm.

Embroider the cat's face the way you like. You can sew beads or buttons instead of eyes.

We sew the paws, tail and head, leaving small gaps in the seams for stuffing with padding polyester. We turn out the details of the head, paws, and tail. We stuff the blanks with padding polyester or cotton wool.

Sew the paws, head and tail to the stand. The paws are sewn on at the top and secured with buttons.

We sew pieces of denim material onto the tail.

We tie a bright bow around our cat’s neck, and you can put a sewn mouse or fish in his paws. If you want to give a product, a souvenir, for example, smoking pipe.

How to make a cute and original stand under a paper phone, our small master class will tell you. The stand can be made from a base: a cardboard ring left over from scotch tape, an empty round box of chips, salt, coffee, or a cup of cotton swabs.