Brick siding and the differences between basement siding and vinyl siding. How to cover a house with brick siding with your own hands? Basement metal siding for brick

Siding imitating natural brick has now become quite popular in terms of finishing the facades of various buildings. This facing material fits perfectly into the overall design of the entire façade of the building. Brick siding is able to protect the walls of the house from negative atmospheric influences, giving the facade originality and sophistication, thereby emphasizing the inner world of the home owners. In our article, we will look at the dimensions of brick siding, what price category the cladding panels are in, and photo and video materials will help you understand the process of installing cladding panels.

Brick siding: photo and price, types, advantages and disadvantages, scope of application, methods of care, video installation instructions

Houses built from brick have always been considered fundamental, reliable, safe and durable. A brick house built according to all the rules can last for several tens or even hundreds of years. That is why many people have stereotypes that brick housing is what they should strive for when planning to build a house.

However, brick housing is quite expensive for ordinary citizens and this is in fact the main reason for the massive refusal to build houses from this material. However, today, given the huge variety of materials for the construction and decoration of houses, brick is gradually receding into the background. So, for example, a house built from timber and covered with brick siding is a completely satisfactory alternative to brick housing; moreover, visually the facade of such a house is practically indistinguishable from a brick one.

It is worth considering the fact that an insulated and sided wooden house is much warmer than a brick one, and this is especially felt in the cold northern regions of the country, where temperatures can drop down to -50 degrees. It is also worth noting that insulate the facade under siding imitating brick can be made of any material and to any thickness.

Basement brick siding: photo

Materials used in the production of brick siding

• The production of brick siding is based on the use of advanced technologies and materials. Polyvinyl chloride is the main raw material for the production of panels. The texture of the siding is created by casting polyvinyl chloride and its further pressing on special patterns;
• The imitation of the pattern on the panels is created in a special way by creating molds, which in turn are cast from casts made from natural brick walls, specially prepared for these purposes;
• The chemical reagents included in the material can effectively protect siding from any aggressive weather factors, such as hot sunlight or ultraviolet radiation.

Advantages and disadvantages of siding panels imitating natural brick

Brick siding has a lot of advantages. Let's consider some advantages of facing material:

• A house covered with brick siding looks great and if you don’t look closely, you may not immediately be able to distinguish artificial cladding from natural brick. Brick siding panels are stamped at the factory in such a way that during their installation the joints are practically invisible, and this is important. For example, this cannot be achieved when installing vinyl siding.
• Covering a house with siding somewhat reminiscent of natural brick quick assembly a simple children's construction set. So, for example, the installation of facade facing panels under brick can be done with your own hands without resorting to the help of professional installers.
• If you plan to insulate the facade, then it is enough to correctly make the sheathing for the siding, then embed the insulation for the walls of the house outside under the siding into it and cover the whole pie with PVC panels to look like brick.
• Brick siding fireproof, since this type of siding contains special flame retardant substances, which do not support combustion. Thus, the question of the fire safety of panels when choosing them is excluded in itself.
• Strength. This is another significant advantage of brick siding that, for example, inexpensive vinyl siding does not have. Just imagine the tests the façade cladding will have to go through over the course of service life, which in turn can reach several decades: weather factor, mechanical, physical, intentional or unintentional impact, etc. The facing panels are cast in such a way that they have sufficient thickness and are equipped with additional longitudinal and transverse stiffeners that give additional strength to the siding.
• Practicality. The materials and technology used to cast the panels make brick siding practical in all respects. So, for example, when installation of brick siding A very small percentage of scraps remains, and if you properly plan the process of installing siding with your own hands, then you can reduce these residues to a minimum. Fastening brick siding panels is done very quickly, since the material has special lock-type connections that allow you to assemble the wall like a children's puzzle without much difficulty. Two people can cover up to 50 m2 of flat façade area with brick panels in one working day with their own hands.
• Economical. It cannot be said that brick siding is the cheapest finishing material for facades. However, it is cheaper than fiber cement panels for home exteriors. It is also a plus that there is little residue when installing siding under brick. It should also be taken into account that this type of facing materials will last you much longer without changing its original appearance, unlike others facade cladding materials.

Siding imitating brick actually has quite a lot of advantages, but what about the disadvantages?:

No matter how strange it may sound, there are practically no downsides to this material for cladding facades. If we talk about disadvantages, then this is, perhaps, a fairly high price per m2 of material, but on the other hand, the price depends on the material itself. For example, the cost of brick siding is definitely higher than the price of vinyl cladding panels. But vinyl siding is one thing, but brick siding is something completely different, and the price is proof of this.

Thus, it is impossible to say unequivocally that the price is a disadvantage of brick siding.

Scope of application for natural brick siding

This type of siding can be used to decorate both private houses and cottages, as well as public commercial and administrative buildings.

It is possible to cladding individual elements with panels, for example, the basement of a building, framing corners or massive columns. It is also possible to cover the entire area of ​​the facade, including the gables. The use of brick siding really has no limits. Everything depends only on the imagination of the designer and architect.

Do-it-yourself brick siding installation

Installing brick siding is easy to do yourself, given that the price of siding per square meter can in some cases reach almost 50% of the cost of the material itself.

Covering the facade of a house with brick siding: brief instructions

To attach brick siding panels you will need a small set of tools, namely:

1. Angle grinder with cutting wheel;
2. Screwdriver and (perforator if necessary);
3. Mounting hook for replacing cladding panels;
4. Tape measure, level, plumb line and square;
5. Glasses, gloves.

• The quality of installation of panels under brick primarily depends on the correctly installed subsystem. The sheathing for siding (or fittings) must be positioned strictly vertically along the entire perimeter of the facade. For these purposes, it is necessary to use a building level or plumb line. Dry wooden beams or galvanized metal profiles are suitable as materials for the subsystem. The sheathing is fastened using hangers of a suitable configuration;
• After installing the sheathing under the siding, it is necessary to install a starting (initial) profile along the entire perimeter of the walls;
• The next step will be the installation of external and internal corner elements. To design the outer corner, you should use the standard outer corner that comes with the siding. For an internal corner, it is possible to use two j-profiles installed and secured close to each other see photo below;

• Before installation, the brick siding panel must be cut by cutting off the back part (lock);
• The panel should be inserted into the outer or inner corner from top to bottom, leaving a small 3-5 mm compensating thermal gap inside;
• After the first brick siding panel is installed, you can secure it and insert the lock to the lock for the next panel;

ADVICE! Fastening panels under brick should be done with galvanized self-tapping screws with a press washer see photo below.

• Framing around windows can be done, for example, with brick window frames or using an external corner, as well as with the help of plastic window slopes and metal ebbs;
• The final stage will be the installation of the finishing profile.

Brick basement siding price

It is impossible to say unambiguously how much imitation brick siding costs, since each supplier and seller has different prices. The average price of brick siding in Moscow starts from 400 rubles per piece. The sizes of panels of different brands of brick siding may vary slightly. You can buy brick panels and components for them in specialized online stores; in addition, the price of the material in this case should be somewhat lower. You can buy basement siding to look like stone or brick at the Leroy Merlin store.

Caring for facades lined with brick siding

Like any other façade finishing material, brick siding requires, albeit infrequently, maintenance. The type of siding for exterior decoration it is difficult to damage, scratch or break, since the brick panels are of sufficient thickness, and the material from which they are made is unpretentious to mechanical or physical stress.

All measures for caring for a facade lined with brick-like panels come down to cleaning it with plain water using a garden hose with the ability to adjust the pressure and connected to a pump of suitable power. The water pressure can be adjusted to the desired height by adjusting the adjustment mechanism. One intensive cleaning of the facade can be enough for quite a long time.

A few words in conclusion

Choosing for façade finishing brick basement siding, you will give a unique, original look to your home. The texture of the brick panels is created using a special method by pressing on patterns and has the appearance of a natural material. It should be noted that this type of siding is used to decorate not only the individual parts of the façade that stand out, such as columns, plinth, etc., but also the walls, as well as the gable part as a whole. A large color palette and variety of brick siding textures will help you decorate the walls of the facade of your house in an original way.

Siding cladding panels that imitate natural brick are excellent for finishing facades of both individual private houses and for the exterior design of commercial and administrative buildings and structures. Brick siding can realize your wildest ideas in terms of facade design.

Brick siding: video installation instructions

Vinyl and metal cladding panels are becoming increasingly popular in the building materials market. PVC siding, combined with its impressive appearance and high performance characteristics, is becoming one of the most common options for covering the bases of houses of any type.

Homeowners who dream of a brick cottage, but are unable to realize their dream, resort to vinyl and metal brick siding. After all, it is not so easy to build real brick buildings - there are requirements for laying a powerful, solid foundation, and the slow process of building a building, and high financial costs.

Basement brick siding can be purchased for exterior decoration of private homes and industrial buildings. Our company offers low prices and fast delivery throughout Moscow and the Moscow region.

Prices and manufacturers

The cost depends on the manufacturer, the quality of the product and the appearance of the facing material. See current photos in the 4 Seasons store catalog.

Equipment

Siding- This is one of the most popular types of cladding with imitation of natural materials. All this thanks to excellent quality and attractive prices. The cost of products from domestic manufacturers is lower than that of foreign companies. Metal panels for a log or house block have a higher cost than their vinyl counterpart and have a longer service life. You can order brick siding for the plinth and walls complete with all the necessary additional elements for decorating corners, openings, cornices and other architectural details. This may include external and internal corners, connecting strips, ebbs, starting strip, finishing strip.

The color selection is based on the chosen style and architecture of the house. It does not require maintenance and will serve its owner for many decades while maintaining its impeccable appearance. After finishing work, you will receive a complete imitation of a brick masonry house with minimal costs and maintenance requirements.

Production of siding stylized as brick

The production of brick-style vinyl siding is carried out using high-temperature casting technology, in which PVC is poured into a mold made by taking an impression of real brickwork. Under pressure, polyvinyl chloride fills all the cracks and pores of the mold, forming a texture that replicates characteristic external defects.

• The surface of the panels has the unevenness and roughness of real brickwork to the touch.
• The similarities will be added by a well-chosen siding palette, which is also copied from the original.
• The color range of the panels is quite diverse and is represented by many options: red brick, burnt, yellow, beige and many others.
• Some manufacturers offer a series of brick panels that imitate ancient masonry with stains of efflorescence, chips and other features of old brick.
• Such cladding, even from a distance of 2-3 meters, will be visually indistinguishable from a surface made of natural material.
• Such siding can be produced both in the traditional version for decorating walls and for arranging the basement of a building.
• Vinyl siding is made of plastic that is more durable and resistant to stress, and is designed to operate in less gentle conditions than wall panels.

A special impetus to increasing the popularity of this type of cladding was given by the appearance of vinyl panels that imitate finishing materials of natural origin. Modern technologies have allowed the manufacturer to produce basement siding:

• under the brick,
• under the tree,
• under a stone,
• marbled

The buyer has the opportunity to decorate their homes in almost any architectural style. Photos of panels.

A house is a “calling card” of its owners. Public opinion also depends on how presentable and neat the interior or exterior decoration looks. The homeowner who says that he is not interested in such parameters as the assessments of others is probably lying. After all, this is why, when choosing materials for decorating their own home, many pay attention not only to the technical characteristics, but also to the impeccable appearance of the product. Basement siding can rightfully be considered such an “aesthetic” product of the construction industry. This article will talk about how to sheathe brick siding.

What is basement siding

• As is often customary in Russia, some goods that come into our lives from abroad are popularly given a different name. So “brick and stone panels”, often used in Canada and the USA, quickly turned into “basement siding”. This limitation in the installation location can be explained by the fact that its cost compared to conventional vinyl panels forced consumers to use it only when decorating the basement, while most of the facade was traditionally covered with conventional siding.

Basement brick siding photo

• The situation with the price of the material has long changed, but the name has remained the same. Although houses lined with such roof panels are much more common. Each manufacturer is trying to expand the range of colors of its products, and at the same time, company designers are constantly working on the appearance and texture of the siding. Therefore, those who care about the individual appearance of their home should not be afraid of looking like their neighbor.

Brick siding video

Thus, the panels can serve:

• facing material for the basement of the building. The thickness of the panels allows them to withstand mechanical damage, which is especially important because in winter the load on the structure will increase many times;
• partial cladding for the entire facade of the building. The layout of inserts from basement and regular siding can be varied. Such solutions always look original, fresh and convey the individual style of the home owner;
• material for finishing the entire building as a whole. You can turn a wooden house into a stone impregnable fortress or a brick mansion in a relatively short time.

Advantages and disadvantages of basement brick siding

Like any building material, the basement siding of a brick house has its ardent supporters and opponents. It all depends on whether consumers pay most attention to the pros or cons of the panels. Among the positive qualities are:

• low cost of siding finishing compared to similar work, but using the materials that PVC panels are designed to imitate;
• low weight not only of the product itself, but also of the entire structure;

• labor costs when installing this material are much less than facing with stone or brick. And in terms of the cleanliness of such work, basement siding wins;
• compliance with the correct installation technology (including when creating lathing) will not disrupt natural air exchange processes and will not require special means for insulation. The heat-saving material used is standard and not necessarily expensive;
• basement siding can be classified as a durable material. Manufacturers claim a service life of up to 50 years. Of course, these indicators cannot be compared with the same natural stone, but again it’s worth remembering the price difference;
• ease of use and excellent color retention are similar to conventional vinyl siding, but the variety of produced forms and the ability to imitate a variety of materials attract many buyers. You can choose not only “wild stone” or “brickwork”, but also rubble stone, wood chips, shingles and other options.

Some of the disadvantages of basement siding become apparent only when compared with materials such as artificial stone or clinker tiles. But since they exist, they cannot be ignored.

• Like any material made of polyvinyl chloride, basement siding has such an indicator as a compression/expansion coefficient under the influence of low and high temperatures. Failure to comply with the installation technology recommended by the manufacturer entails disastrous consequences for the entire structure in the coming warm/cold season.
• The second drawback relates rather to the appearance of the panels, but in some cases this may play a decisive role. So,
• The color palette of siding, despite its diversity, is inferior to the same clinker tiles or artificial stone.
• No matter how skillfully the imitation of the pattern and texture on the panels is done, even from a short distance it will be clear that this is not a “noble” species, but PVC siding. Therefore, no matter what the sellers say, basement siding is a material in the middle price category, and not luxury.

How to calculate the quantity of material when purchasing

• It is necessary to measure the length and height of the walls or those areas where it is planned to install the panels. We must not forget that the resulting figure will not be final, because when assembling basement siding, the costs of adjusting the pattern cannot be avoided. They make up about 10%.
• The amount will vary in the following ratio: the shorter the wall length, the lower the installation costs. This also applies to panel sizes: the adjustment allowance increases with the length of the sheet of material. Large losses are not expected during the installation of profiles and slats, but they must also be taken into account.

• The average size of a brick basement siding panel is 1120x472 mm.
• In most retail outlets, consultants will offer assistance with calculations. Similar services are available on the website of the manufacturers of this material.

Buy brick basement siding

• Despite the relative availability, the cost of two packages of material (similar in appearance) can differ significantly. Why does this depend?
• First of all, the cost depends on the raw materials used. Foreign analogues are made from European raw materials and using locally produced dyes. The price of goods produced abroad will not be low.
• The country in which the product is produced also affects the final cost. If the panels were produced abroad, then delivery costs will certainly be added to the cost.
• The difference in price may also depend on the proximity of the seller directly to the manufacturer. By purchasing panels from official dealers, you can save a little.
• It must be said that among Canadian, American and German manufacturers, Russian companies are also beginning to conquer the market.

Preparing the base for installation

• When the material has been purchased, you can begin finishing. The surface on which the sheathing will be mounted must be smooth and durable. There are often recommendations for attaching basement siding directly to the wall. This practice is not encouraged, even if the confidence in the evenness of the base is 100%. Deformation of the siding during operation can only be prevented by its installation on the sheathing.

• The most acceptable material for sheathing is a metal profile. It is durable, does not require compliance with the permissible humidity level (like wooden slats) and treatment with antiseptics and fire retardants (which is required if done “conscientiously”). Yes, and beams with knots and unevenness will not work either. Therefore, the metal profile must be mounted depending on the expected scope of work.
• The horizontal direction is convenient if you plan to cover only the lower part of the building with siding. The first plank is fixed at a height of 15-12 cm from the ground. This requirement is especially important if the climate does not have high temperatures. For ease of installation of panels throughout the house, it is better to make the sheathing vertical. Framing in two directions at once will take a lot of time and is not a mandatory requirement.
• But the step with which the guides will be equidistant from each other must be observed. In the horizontal version, this distance is equal to ½ of the panel height. For vertical planks it is ½ the length of the siding. This refers to the gap from the right edge of one guide to the right side of the other.

• The vertical elements of the sheathing at the outer corners of the house are attached end-to-end. At internal corners - at the distance of the fastening strip. When purchasing material, you should check with the seller whether this manufacturer has strips for internal corners. The fact is that some brands of basement siding do not provide such a component.

Installation of basement siding under brick

The material in question has several specific names of elements that you need to know. Everything is clear with the panels themselves. But some other points may require clarification. Therefore, before starting work, it is worth conducting a small educational program.

• The element that acts as a fastener for the first panel and is located at the base of the building is called the starting strip.

• To make the final panel look neat horizontally, it is framed with a fitting profile. For vertical planes, a J-shaped profile is used.
• External and internal corners help connect panels of material to each other at the appropriate joints.
• To neatly join two rows of siding sheets together, use an H-shaped profile.
• In addition to these elements necessary for installing the panels exclusively on the base of the building, there are also additional chamfers and overlays that will ensure a reliable and aesthetic connection of the components when completely finishing the facade of the house with siding.

Now that it is clear what you have to deal with, you can proceed to the initial stage of assembly - installation of the starting profile.

• Stage 1. The starting profile should not reach 10 cm to the corner of the house. It is fastened with nails along a strictly horizontal line (drawn in advance according to the level). The fastening step is 30 cm.
• Stage 2 involves calculating the required number of panels. To do this, the total length of the building wall must be converted into centimeters and divided by 112. The final panel should not be less than 30 cm.

• Stage 3 can be considered the beginning of a full-fledged finishing. Here you need to install the first panel. The direction of all work is from left to right. The first panel must be taken and installed in such a way that its corner does not go into the edge of the starting profile (it is slightly lower by a couple of millimeters). It should be moved to the right almost all the way and then a layer of sealant should be applied along the edge. Now you can completely join the siding element to the corner. Before installation, you should read the instructions from the manufacturer, where he indicates the size of the required gaps between the components of the structure. These seams will become a "retreat route" for elements of the material as it expands or moves. Fastening with self-tapping screws or nails should be done strictly at right angles. It is recommended to use a substrate.
• Stage 4- this is the further formation of the series. The second panel is inserted into the starting profile and carefully moved to the first sheet of siding. The procedure is repeated until the required number of tiles and rows corresponds to the size of the base. In the case where the panels imitate brick or stone masonry, it is necessary to shift the pattern in each subsequent row by 15 cm relative to the previous level. This will give the finish a more natural look.

The panels must be joined with smooth movements, without unnecessary effort. One element is secured with at least five hardware. They should not hit the mounting pins (these are the visible posts on the back of the siding). These structural solutions are designed to protect the panels from possible deformation.

• Stage 5 involves fixing siding on internal corners, for which a profile or corner is used. After this, the work can be transferred to another wall.
• Stage 6 It is considered final when the fitting profile is installed. Holes are made in it, slightly larger in size than the diameter of the fastener. It is attached to the foundation, at the same time tucking the edges of the panels into it and performing additional fixation with sealant. If you need to make an angular bend, then the profile is slightly heated and given the required shape.

For a successful result (especially if you have no experience working with basement siding before), it is better to hire a couple of people as assistants. But even under this condition, the process will not be fast until the skill is acquired. Although even novice masters are quite capable of this task, you just have to be patient.

Half a century ago, such a well-known material as brick occupied the dominant stage in the decoration of residential and country houses, however, remaining quite labor-intensive to use and costly from the point of view of financial accessibility. Currently, the modern construction market offers consumers brick siding. Let's figure out whether he will be able to change the centuries-old tradition, displacing classic brick from the list of leaders.

Peculiarities

Siding (eng. siding - external cladding) is a material for cladding the walls of buildings, which performs two main functions: mechanical, that is, it protects the building from external atmospheric influences, and decorative, it transforms the facade of your house. Its homeland is considered to be North America, where for the first time painted wood boards were attached to the wall so that the next horizontal layer hung slightly over the previous one; over time, this type of building cladding was called siding.

Brick facade siding is divided into vinyl, metal, fiber cement and plinth. Vinyl is the most financially accessible, since it is made from a relatively cheap polymer substance - polyvinyl chloride. Nevertheless, due to its amazing strength and almost perfect imitation of the appearance of brick, the basement brick remains the most popular on the consumer market.

Video - Review of brick siding

Advantages

The advantages of this include the following features:

• Brick siding for exterior decoration can be used to cover the surface of the walls of a building from absolutely any material, the main thing is to ensure the elimination of defects and irregularities on the wall itself;

It is fair to note that the use of metal siding panels for cladding buildings with an unreinforced foundation entails certain limitations and the need for additional strengthening of the foundation due to the increasing load on it.

• The ability to easily insulate your home using any of the heat-insulating elements on the market for building materials;
• High social accessibility of siding, which is explained by the relatively low cost among other facade finishing materials.

Flaws

Despite the impressive abundance of advantages, brick siding still has disadvantages. Let's look at them in more detail:

• The panels lack fire-resistant properties, and as a result, there is a high risk of rapid fire spread when fires occur;

Siding manufacturers solve the problem of susceptibility to fire by applying special fire-resistant pastes and solutions to the facing panels, however, this method immediately increases the cost of the material.

• No matter how high the quality of the panels you purchase, there will still be visual and tactile differences between the cladding of a building with classic brick and the cladding of a house with siding; however, they can only be determined by approaching the wall closely;
• Limitations when choosing colors;

• For complete and high-quality work with siding, there is a need to purchase specialized equipment and tools, strict compliance with safety requirements and the installation process.

Kinds

Brick siding is usually classified depending on the type of material used to make the panels.

Vinyl

This type of siding is produced by heating polyvinyl chloride to its melting point, then placing it in prepared molds that replicate the surface of the brick. As a result, the manufacturer receives an almost complete imitation of brickwork, but with much less weight.

Based on the above, the advantages of vinyl siding become obvious: low weight, which, in turn, greatly simplifies the work of cladding; such panels are not difficult to transport, and installation can be done by yourself.

Vinyl brick siding is the most financially affordable, and the material underlying it eliminates the possibility of damage to the panels by biological (mold, rodents, insects, etc.) and physical (ultraviolet rays, temperature changes, precipitation) effects.

Significant disadvantages of vinyl siding include the possible distortion of the shape of the panels due to temperature changes. Solving this problem is not difficult; it is enough to take this aspect into account during the installation process, calculating the air gaps in case of its possible expansion.

Another disadvantage is the increased fragility and brittleness of panels made from this material in the cold season (at -10 and below).

It is difficult to deny the fact that brick-look vinyl siding, although it has a lot of impressive advantages, does not look as natural as, say, panels that include elements of natural design, however, the basic properties and characteristics allow it to confidently remain a stable competitor on the market among other cladding materials for exterior finishing of buildings.

Metal

Metal siding is panels for which the main material is metal. Manufacturers coat the metal surface with special substances that prevent oxidation (corrosion).

A striking advantage of metal siding is its impressive strength, which increases the service life of panels to decades. By choosing this type of cladding, you will get a perfect imitation of classic brickwork. However, along with the impressive strength of the material, the possibility of the formation of depressions and dents under significant mechanical stress cannot be ruled out. The disadvantages include the significant mass of the panels and the higher cost of metal cladding for brick.

The financial affordability of metal products is much less than, for example, vinyl, however, the technical characteristics and operational capabilities of metal siding fully compensate for this disadvantage.

Fiber cement

It is a panel based on a complex of cement, cellulose and special auxiliary polymer components that beneficially complement the properties of cement. As a result, manufacturers receive a material that is not inferior in strength to concrete, but is much lighter than the latter, with a surface that replicates real brick.

Fiber cement brick siding is endowed with resistance to mechanical, physical and biological influences, which significantly extends its service life, however, the large weight of the panels makes the installation process long and labor-intensive, requiring the efforts of several people, using special equipment. Fiber cement has found its use in base cladding, where damage is most likely to occur.

The use of fiber cement siding is excluded in old houses and houses with unreinforced foundations, since the large weight of the panels increases the risk of foundation subsidence, which will lead to the destruction of the building.

Tsokolny

Basement siding is represented by panels based on polyvinyl chloride (PVC) or cement. This type of cladding with particular accuracy repeats the appearance of brick, and has all the technical and operational properties of both vinyl and fiber cement siding, however, due to the specifics of its use (cladding the base), and its close location to the ground surface, it is imperative to meet the requirements for panel thickness (at least 3-5 mm). Following this simple rule will keep the cladding of your base in perfect condition for a long time.

Design

Brick facade siding, being a relatively new facing material, has already earned a place of honor among other, more well-known representatives due to its practicality and versatility, as well as the ability to dilute the usual color scheme of real brick.

Siding manufacturers offer consumers a huge number of color options: from standard white to golden, coffee, milk and even amber shades. In single copies or as part of a private order, you can purchase panels in the color of marsala, malachite or granite.

If you wish, you can be creative by playing with patterns at your discretion, using when laying both components identical in shape and texture, and combinations of clinker products with different properties.

Manufacturers

In the building materials market, there are many organizations engaged in the production of brick siding.

Installation

Installation of brick siding includes the following steps:

1. Inspection and elimination of defects in the facade wall;
2. Installation of lathing (load-bearing - vertically; when planning insulation, the first layer is installed horizontally);
3. Installation of corner profiles;
4. Setting the starting bar;
5. Separation (banding) of window openings;
6. Siding installation.

Video - Detailed installation of brick siding

Preparatory work

Facade cladding begins with calculating the required number of panels and preparing the external walls. In order to find out the amount of material you need, you can use electronic calculators, or calculate the area of ​​the facade itself (the length of the wall * the width of the wall, followed by adding the areas of all the walls), knowing the width and height of the panels, we can easily calculate their number, however, Please note that windows and doors cannot be finished. It is necessary to purchase brick siding with a small margin, about 10-15% of the total amount of material, depending on the complexity and volume of work.

Next comes the preparation of the facade: removal of old cladding, crumbling areas, elimination of cracks and damage. There is no need to perfectly level the surfaces, since they will all be carefully covered with panels. After checking with the drawings, the planned subsystem is marked.

Lathing

Lathings are usually represented by metal profiles or wooden logs. The strength and durability of metal profiles is much higher, while wood is suitable for one-story houses or houses with wooden walls. To extend their service life, metal profiles are coated with compounds that prevent corrosion, and wooden profiles are impregnated with fire retardants and antiseptic substances. Fastening is carried out using brackets.

The area of ​​the facade must be calculated taking into account the battens, as they increase the width of the walls.

Installation of panels

The siding is installed on the sheathing and secured with self-tapping screws. The panels themselves are connected like a lock. Installation begins from the corner, moving along the wall. Corners and openings are designed using ready-made corners, platbands and other additional elements.

Considering the peculiarities of our climatic conditions, there is an urgent need for the use of insulation. They are laid between the profiles, and the thickness is calculated taking into account the thermal conductivity of the wall material, paying special attention to the junction of thermal insulation and sheathing, since gaps can form in these places, negating the properties of insulated brick siding.

Advantages of covering buildings with panels

1. Due to the lightness of the material, brick facade and basement siding can be used for finishing wooden houses and old fragile buildings that cannot withstand heavy loads on the frame.
2. It is difficult to determine at first glance that this is an imitation of brickwork using panels. The material perfectly matches the texture of the facing stone.
3. To get rid of dust and dirt, products can be rinsed with water from a hose without using detergents.
4. Brick-like facade panels are resistant to physical stress and bad weather. They do not lose their shape under the influence of temperature and humidity and last up to 50 years.
5. Unlike natural stone, the material is produced in the form of wide panels and is inexpensive - the price for 0.39-0.45 m2 is from 220 to 495 rubles.
6. To install siding, you do not need to level the walls of the building. It is attached to the lathing, thanks to which the future external facade looks smooth.