Garden benches. How to make beautiful benches photos and instructions Simple street benches

A light and comfortable garden bench can be placed on a cozy veranda or placed in the shade of trees so that you can hide from the heat and enjoy reading a book or a pleasant conversation. So, let's describe the main stages of its manufacture.

Whatever material you decide to make a bench from, in order to make it as comfortable as possible, certain proportions should be observed when constructing it:

• height: the seat is always located at a level of 0.5 m from the ground;
• width: at least half a meter;
• back height: 0.45 m;
• its tilt angle: ideal 45°;
• Armrest height: calculated from the seat level and should be 20 cm.

If the bench is dug into the ground, the length of the legs increases by at least 70 cm. In this case, its legs are lowered into the prepared holes, covered with stones and filled with concrete. Do not forget to pre-treat the wood with a solution that protects against rot and mold.

DIY bench step by step

It is better to make the back and seat of a garden bench not a solid canvas, but to make a small distance between the planks. In this case, rainwater will drain from them completely, the boards will be better ventilated, and the product will be less susceptible to rotting:

You can replace the stain with a strong solution of potassium permanganate. Wood treated with a similar composition acquires a dark and rich color. Depending on the amount of manganese, you can get a walnut shade or a rich mahogany color.

Wide plank bench

Bench made of flexible vine or willow twigs

Eco-friendly garden furniture, not only a bench, but also chairs and even a table, can be made from pre-soaked willow or vine twigs. You can also use branches of hazel, willow, aspen or even birch, but in the latter cases the product will last much less and will look rougher.

To collect raw materials, you will need to wait until the shoots “ripen”. The optimal season for harvesting branches is from September to March. It is at this time that the rods acquire the required flexibility:

Types of benches

We have described only the simplest options for making a garden bench. It can be made from practically any materials:

If you are planning to make a wooden outdoor bench, it is better to use coniferous or larch, which is difficult to rot. Old oak or hickory furniture that has been inherited can also be used as material to create a durable and very original garden product.

Should I buy a bench or make it myself?

Buying a bench for the garden is, of course, much easier. Moreover, the simplest of them are quite cheap.

But still, work done with your own hands will bring more satisfaction. And with a certain patience and dexterity, even made from improvised materials, it can become an exclusive work that you won’t be ashamed to show off to your friends and neighbors. For example, in the next photo the bench is made of ordinary pallets, painted with bright paint and decorated with decorative pillows.

Country bench decor ideas

A garden bench is an integral part of landscape design. With the help of such a bench you can create a relaxation area in any area. It helps create an atmosphere of comfort and coziness on the site. A bench can become a favorite place to relax, read a book or have an intimate conversation. Such structures are made from various materials: wood, metal, stone, plastic. The material for a garden bench can be various leftover building materials, car tires, and even completely inconspicuous driftwood. When choosing a material for a garden bench, you should remember that a summer cottage is an ecological corner where you want to take a break from the city noise, so it would be reasonable to use organic materials. What to make garden benches from.

Bench-flower garden at the dacha

The garden will be perfectly complemented by a bench with small flower beds. You can easily build such a bench with your own hands. Work should begin with assembling flower boxes. Then the back and seats are assembled. The entire structure can be secured using special furniture corners.

Bench around a tree

In the shade of a large spreading tree, you can install a circular garden bench, which will become a place where you can hide from the scorching sun on a clear summer day. This design is easy to install yourself. To build a circular bench, you can use almost any available material: boards, metal pipes, poles. A circular bench can be installed around a small garden fountain or a beautiful flower bed. The advantage of such a bench is that a large number of people can hide on it from the hot sun at the same time, and the entire structure will not take up much space in the garden.

Bright bench with mosaic in the garden

A bench decorated with bright mosaics will create an atmosphere of a permanent fairy tale and a bright holiday in the garden. In addition, such a garden bench is very practical. She is not afraid of snow or rain. Soda benches decorated with mosaics can amaze everyone with their bright patterns and original shape. Such an original bench can be made from the most ordinary design. The material for the mosaic can be anything: broken dishes, tiles, multi-colored glass, pebbles, bottle caps, etc. What else to decorate with a mosaic.

Garden bench under canopy

A bench under a canopy will be a full-fledged place to relax at the dacha. On such a bench you can spend time talking or retire to read your favorite book on a clear sunny day, or hide under a canopy during rain. You can assemble the structure yourself in a few days.

The seats for such benches are usually made of wood. It can be solid, or consist of several wooden beams connected to each other. The seat can be made soft. To do this, use liquid nails or glue to secure the entire surface of the foam rubber, previously covered with fabric. You can decorate the back of a garden bench in the same way.

The bench canopy can be made from boards, plywood, polycarbonate, and metal. If the structure is made of plywood or boards, before installing it, all wooden parts must be coated with paint or varnish. This will extend the life of the canopy and protect it from various pests and moisture.

Stone garden benches

Benches made of stone are not very convenient to use, but they can bring the spirit of antiquity to the design of a summer cottage, as they always look like they are not from our time. A stone bench can only be used for its intended purpose in the warm season and direct sunlight should not fall on it, otherwise the seat of the bench will be too hot. The disadvantage of stone benches is their fairly high cost.

If you take untreated stones as the material, you can make an interesting design for the garden yourself. This bench is suitable for landscape design made in the style of Japanese minimalism.
An excellent alternative to the usual garden bench can be a shape made of stones in the form of an easy chair, covered with lawn turf.

Benches with forging elements

Forged garden furniture looks very elegant and does not weigh down the design. But it’s better if forged elements in furniture are combined with wood. Such a bench will look great both under a forged arch or perlog, and surrounded by garden trees and shrubs. Most often, forged elements are used as legs and handrail supports. The back and seat of the bench are made of wood. Forged elements are good because they can be made based on any sketch, thereby choosing a bench design to suit every taste.

- the oldest piece of furniture that has become available to man. A wooden piece of driftwood, simply hewn a little with a stone ax and brought into a cave - this is the great-great-ancestor of all modern furniture, closer to which are wooden benches, which have not lost their relevance and relevance - neither in the house, nor, especially, in landscape design.

Garden benches made of wood: choosing a style

It may seem only at first glance that a bench is far from the most important element in landscape design, but real professionals say that it is with the bench that garden design begins and ends. Otherwise, what is all this effort and work for, if no one can enjoy and appreciate it?

That is why it is important to place the bench correctly, choosing a place from which the most beautiful and attractive view opens, and the bench itself can become an elegant accent that complements the beauty of the garden.

A comfortable bench in the garden will become a place where you can hide from the hustle and bustle, admire nature, read a book or listen to music, dream, or just relax. At the same time, wooden benches for a summer residence are a powerful and effective “weapon” of landscape design; they can be used to zone a site, mark boundaries, etc.

At the same time, garden benches differ in their functional purpose:

• front doors - they are installed at porch, at the entrance of the house. These are wooden decorative benches, richly decorated with carvings, they become a favorite place for photo sessions

• dining rooms - they are usually placed near B-B-Q, on terraces, in places where the family likes to dine outdoors

• garden - small benches, next to flower beds, flower garden or plot, it’s good to sit on them and relax while working in the garden. Usually it is very simple in shape, without decorations or aesthetic delights.

• relaxation - usually they are “hidden” in the most secluded corner of the site, away from strangers and even your own eyes, where the whole environment is conducive to relaxation. The main criterion is comfort, and you don’t have to be modest with the size - you can climb onto such a bench with your feet and even lie down

To make the bench comfortable, you should adhere to the following dimensions:

• the optimal height is about 40-50 cm, while the legs will rest comfortably on the ground and rest
• seat width - about 50-55 cm. The seat is made with a slight inward slope - 5-12 cm, so it is more convenient to lean on
• back height – 35-50 cm
• backrest tilt – within 15-45 degrees
• if armrests (hand rests) are installed, then the optimal height for them is 15-20 cm, measured from the seat

Advice! When choosing material for a bench, preference should be given to wood that is especially resistant to moisture and decay - oak, larch, hazel, cherry. But teak is considered to be the “champion” in terms of strength; its wood contains natural resins that protect it from rot and insects (bark beetles, termites).

The choice of the shape and type of bench depends on both your preferences and the style in which the garden is decorated.

For country style, a bench that is as simple in shape as possible, natural in color or painted in a discreet brown shade, is suitable. For the Provence style - a slightly antique bench, quite modest in terms of decoration, painted in blue , white , violet or blue color.

• The bench must be periodically painted (opened with varnish). It is best to do this at the beginning of the season, before thoroughly cleaning the wood from any remaining old paint.
• in hot weather, the bench should be placed in the shade - not only you, but also the tree will be comfortable there - ultraviolet radiation negatively affects the quality of wood
• regularly check the fastening elements (bolts, screws, nails), if necessary, fasten them all the way, do not allow the structure to loosen
• If you notice traces of rot on one board, replace it immediately, do not let it spread further

You can relax calmly in the shade of trees in the summer or bask in the sun on a cool autumn day on a wooden bench that you installed in the garden yourself. In modern design, garden furniture is one of the full-fledged elements of landscape design.

Taking into account the decorative value of garden benches made of wood, you should try to choose a model that will harmoniously fit into the environment. For a young garden or summer cottage without large trees, it is better to choose light furniture options with decorative thin metal legs, simple benches and benches that are laconic in shape. If the garden is old and well-groomed, then seats in the Provence style are suitable - stylized as antique furniture with wooden decor.

I can decorate an overgrown summer cottage with an imitation of a wild natural thicket with benches assembled with my own hands from natural materials - driftwood, driftwood, lightly processed branches. A bench made of logs hewn with an ax would look very good in such a garden. Such seats should be installed in places hidden from view: among flowering bushes or around a bend in a path.

When choosing a place to install a bench for a summer house, you need to pay attention to the views that will open to the eyes of those sitting on it.

It is undesirable to place the bench in such a way as to contemplate an unsightly fence or compost heap. Place it near a pond or flower bed, under a branchy old tree.

Then your relaxation will be complemented by the pleasure of the smell of flowers and the play of light on the water, the rustle of leaves and coolness in the shade.

Various types of benches can be installed on the veranda near the house, in the relaxation area by the pool or outdoor fireplace. They will also find use under a canopy in the garden. In each case, you need to adhere to the general rules of compatibility of a wooden product with the general style of the site. How to make original benches from pallets, watch this video:

Wood is traditionally chosen as a material for garden furniture - an easy-to-process material that allows you to bring almost any idea to life. Currently, along with ordinary boards and bars, you can use moisture-resistant varieties of thick plywood. From durable and aesthetic sheet material, you can assemble structures that are suitable for modern designer landscapes and for an ordinary courtyard that does not have certain style characteristics.

If wooden benches are made in a stationary version, then care should be taken to protect them from moisture. A variety of impregnations and paints and varnishes can serve this purpose. Outdoor furniture will have to be coated with paint or varnish every 1 to 2 years as the protective layer wears out. Such measures can significantly extend the life of a wooden structure.

How to build benches yourself?

In order to build a comfortable bench with your own hands, you need to make a sketch of it. There are optimal sizes of garden furniture that must be observed:

• seat height above the floor - 40 - 50 cm;
• width (depth) of the bench - 50 - 55 cm;
• The height of the backrest above the bench is 35 - 50 cm.

These dimensions allow a person of average height to sit comfortably, lean on the back, and stand up easily. If the owner’s build differs greatly from the average, then the dimensions of the bench will have to be selected individually. The backrest is usually made with a slight tilt back. For more information about wooden benches, watch this video:

To work with wood you will need the following tools:

• hacksaw or jigsaw;
• drill and screws, or hammer and nails;
• roulette;
• pencil.

To assemble products of complex shapes, wood glue can be useful. It is used to fasten parts that are connected using the tongue-and-groove method or with a furniture dowel. For plywood products, long metal threaded studs and nuts are useful.

A simple bench for a vegetable garden or bathhouse

Even a novice craftsman can make a simple wooden bench with his own hands. Such benches can be seen in abundance at the gates of village courtyards; they can be placed near the beds, in a bathhouse or utility room. They are not distinguished by their sophistication and decorativeness, but they can perform the functions of garden furniture quite successfully. To make a bench you will need a board 2 - 2.5 cm thick and about 20 cm wide.

Benches for a bathhouse or vegetable garden are easy to make

According to the drawing in Fig. 1. you need to cut out the following parts:

• seat - 1 piece;
• apron - 2 parts, the length of each is 10 cm shorter than the seat;
• legs - 2 parts.

File off the corners on one side of each apron piece as shown in the diagram. Measure 2 - 2.5 cm from the edges of the element for the legs on each side in the upper part, cut a groove 10 cm long. If desired, cut out holes for the handles on the bench seat. To learn how to make a bench with your own hands, watch this useful video:

Assemble the product in the following sequence:

1. Drill holes for self-tapping screws in the plane of the apron board at a distance of 10 cm from each end. Place the board in the groove on the leg parts and screw the screws through the holes into the edge of the board. Attach the 2nd leg pattern to the other side of the apron.
2. Repeat all steps and attach the apron to the other side of the bench base.
3. At a distance of 15 cm from each end of the seat, make several holes in the plane of the board. Place the part on top of the base and attach it with self-tapping screws, screwing them into the end of the leg part. For strength, you can make additional holes along the length of each side of the seat and attach it to the apron boards.

Sand the surface of the product with coarse sandpaper to remove burrs. If necessary, paint the bench to your taste.

Simple bench with backrest

Another simple project is shown in Fig. 2. To make a bench with a backrest with your own hands, you will need 2 pieces of logs about 25 cm long, boards for the back and seat, and 5x5 cm bars for the backrest posts. If you want the seat to be a little higher, you can take 4 pieces of logs or beams and lay them on top of each other, fastening them with dowels.

The back is screwed on with self-tapping screws on the reverse side

Making the bench is very simple. To ensure that there are no nuts or nail heads on the surface of the product, fasten the parts using dowels and glue. The back can be screwed with self-tapping screws from the wrong side so that they do not drill through the board.

To make dowels, you need wooden rounded rods (a thin handle for a garden tool will do). Drill 2 holes in the log with a diameter equal to the thickness of the dowel. Based on their location, make corresponding recesses in the underside of the seat. The work must be done very carefully so that during assembly you do not have to adjust parts of the bench. For more information on making a bench with a back, watch this video:

Lubricate a piece of wood for the dowel with glue and insert it into the hole on the log so that a small fragment remains outside. Its length should be equal to the depth of the recess drilled in the seat (Fig. 3). Lubricate the dowels with wood glue and place the board on them. Do the same with another piece of log.

Cut the bars to the required length to make the backrest posts. Screw it to the ends of the logs with self-tapping screws. Drill 2 holes in the upper part for attaching the backrest. The distance between the holes should be less than the width of the board. Screw the screws through the holes into the board. The finished bench can be painted or coated with clear varnish.

Stylish bench with backrest

Making garden furniture according to the proposed project is not difficult at all. The basis of the structure is slabs of porcelain stoneware or concrete and boards 2 - 2.5 cm thick. If desired, heavy materials can be replaced with light plywood of the same thickness. A wooden bench with a back will be mobile.

Stylish bench has an interesting backrest

The following parts will be required:

• squares 50x50 cm for legs (plywood or board) - 12 pcs.;
• boards or plywood rectangles 15x200 cm - 5 pcs.;
• backrest supports 15x65 cm - 4 pcs.;
• crossbars 15x17.5 cm - 2 pcs.;
• threaded rod M16 55 cm - 4 pcs.;
• nuts and washers M16 - 8 pcs.;
• self-tapping screws

The plywood will first have to be cut into fragments of the required shape and size. If boards and slabs are used, this step can be skipped. To learn how to make an original bench with your own hands, watch this video:

Drill 2 holes at an equal distance from the edges in the upper part of the square parts of the legs. Adjusting the long parts of the seat as in the diagram (Fig. 4), make 2 holes in them on each side. Screw a nut onto one end of each rod and put on a washer. Alternating long and square elements, assemble the bench. Tighten the nuts on the other side of the studs.

This bench can be used without a backrest.

But for convenience, you can do it too. To do this, fix 4 boards 15 x 65 cm with self-tapping screws from the inside of the back of the bench. Glue crossbars between them or place them on dowels.

Decorative benches made from natural materials

Untreated wood is an excellent material for garden furniture. The bench, similar to the throne of a forest king, fits perfectly into the landscape, imitating wild nature. Such seats are very appropriate near rockeries or old trees with a spreading crown in an overgrown corner of the garden. Rustic benches go well with picnic areas trimmed with wild stones or barbecues made of sandstone and boulders. Original shop in this video:

The simplest option for sitting from logs is a monastery bench. To make it, a raw log needs to be sawn in half lengthwise. Legs are made from short sections, laying them cut down on the ground. Long halves of logs are secured to dowels from above, cut side up. To prevent the bench from staining your clothes, it is better to choose hardwood logs and dry them well before assembling the furniture.

To remove splinters and burrs, the cut plane must be planed smoothly with a plane and treated with emery cloth.

A complicated version of such furniture is a bench made of logs, supplemented with a backrest with your own hands (Fig. 5). To attach the backrest, you need wooden or metal supports and a crossbar. These parts can be made from thick wood branches, timber, or steel strips. Fastening is carried out using self-tapping screws of sufficient length or nails.

Examples of original wooden benches

A log bench can be made in another way (Fig. 6). The photo clearly shows the grooves in the upper part of a thick log sawn in half. You need to insert a board at least 4 cm thick or a beautiful cut of a tree trunk into the grooves. If desired, an exclusive piece of furniture made by yourself can be supplemented with a backrest. The supports for it need to be attached to the inside of the legs on a flat surface. The crossbar can be a thick branch or the same cut of wood as for the seat.

Chopped table with benches

A set of table and benches will be convenient at the dacha in the dining area or near the barbecue (Fig. 7). It’s not difficult to make one if you know the basic techniques for making wooden log houses. To begin with, 2 logs of approximately equal thickness are placed on the ground. With an ax you need to cut out semicircular recesses (bowls) at the ends of the logs. The size of the bowls will depend on the diameter of the log that is chosen for the seats. This trunk needs to be sawn lengthwise. An example of chopped furniture in this video:

In the middle of the 2 lower logs, you need to cut out 1 more cup to install the transverse support. It may not be a very thick log. Its length should be such that the ends protrude beyond the side surfaces of the trunks.

For the table base you need shorter logs. Their length is approximately equal to the desired width of the tabletop.

In the middle of each trunk, you need to cut out recesses that are suitable in size to the thickness of the crossbar. Lay the parts of the log house with the cups down, covering the transverse log with them. Make a tabletop from the boards and secure it with nails. Place the halves of logs in the places designated for them.

How to make benches from branches or driftwood?

This is the most creative activity. Having found beautiful driftwood and polished driftwood trunks in the forest or on the shore of a reservoir, you can make furniture of amazing beauty (Fig. 8). Each such bench is unique, because it is difficult to find 2 identical branches. Therefore, there can be many solutions for how to make a bench from driftwood.

The main thing for all such products is one thing - the parts are adjusted directly on the spot to fit the already finished legs, seats, and backs. The branches should intertwine harmoniously, forming a structure that will support the weight of an adult. To connect non-standard parts, you can use both self-tapping screws and nails. The most reliable connection is with dowels and glue. Where a tight fit of the pieces of the structure is desired, driftwood can be trimmed with an ax.

The most original benches can be made from branches and driftwood

Such decorative benches can even be used to decorate rooms in a chalet or rustic style. They go well with wild stone trim. They will look harmonious in the garden among flowering bushes or near a pond.

The variety of models of benches that you can make with your own hands from wood is limitless.

The main thing in making furniture from wood is the careful fit of parts.

Then the finished product will be neat, without distortions. Treated with moisture-proof impregnations and coated with varnish or paint, any garden seat will last for many years.

When you visit the official website of Casino X for the first time, you will definitely remember this site for its unique design and large selection of promotional offers. Experienced gamblers who know a lot about gaming software are happy to become guests of the resource. It has everything you need for a comfortable game: licensed machines, bonuses, a high level of service. This is a serious long-term project that is successfully advertised on the Internet and provides a real opportunity not only to hit the jackpot, but also to withdraw your well-deserved winnings without any difficulties.

Virtual slot machines from Casino X of all genres

All professional resources that review Casino X note its very impressive range of games. More than 450 slots from more than 30 providers await you. The main part consists of developments from Netent and Microgaming. Basically, these are five-reel simulators of various genres: fantasy, history, stories from films and legends, fictional stories, sports, animals, treasures and, of course, fruit classics. For convenience, the top online slot machines are collected in a special section. Interesting game mechanics await you:

• free spins;
• cash bonuses;
• multiplication of rewards;
• Special symbols;
• accumulators and multipliers.

To the official website

The web resource also pays attention to tabletop entertainment and the Live category. To switch to paid bets, you need to create a profile in the system. Once the quick registration is completed, the player can top up his account. Immediately after this, you can start playing on the most popular slot machines. Most of the devices are adapted for gadgets with touch controls. On a smartphone, Casino X mobile version is slightly different from the format on a computer. There are no functional differences: you manage your bank and bets in the same way as on a personal computer.

Free game mode at Casino X online

Club clients do not have to look for where to download machines for constant access to demos. The browser version of the portal works around the clock, as does its technical support. The site is occasionally updated to better meet current quality standards. All guests of Casino X can play for free without registration under one condition - connecting a smartphone, tablet or computer to the Internet. Just click on the video slot you are interested in and start a test game in demo coins. The results of such spins or bets at the roulette or poker table will not affect the real balance in any way.

Unlimited access to Casino X official website

If for some reason the full version of Casino X does not open at your usual address, this problem can be easily solved thanks to alternative copies. For every client and ordinary guest, a mirror today serves as the most convenient way to enter your account and the page with slot machines. The same licensed software with a full guarantee of specific algorithms awaits you. You will never lose your status and balance, as additional addresses with a similar interface and bonus features are constantly being added to the network.