Repair of hydraulic equipment. Repair of hydraulics at a modern repair base. Hydraulic equipment repair

Repair of hydraulic cylinders additionally includes the possibility of worn surfaces of hydraulic cylinder liners and rods.

Repair of hydraulics of special equipment and other hydraulic equipment is carried out at a repair base in the Moscow region; we repair hydraulics with the ability to restore worn parts or replace them with new components. Test stands allow you to test repaired equipment and provide the customer with a guaranteed functional product for long-term and successful operation.

Please note that we do not repair:

• inflated housings for hydraulic pumps and hydraulic motors;
• broken geometry of hydraulic cylinder liners and rods (rupture, swelling, crack).

The procedure for carrying out repair work:

Before starting work, our manager provides a full consultation by phone and helps the client determine the approximate cost and timing of the work, as well as the feasibility of repairs. Exact prices are announced immediately after troubleshooting at our enterprise, time of troubleshooting:

• hydraulic cylinders - from 1 to 4 days;
• hydraulic motors/hydraulic pumps/distributors - from 3 to 7 days;

Hydraulic equipment is the basis for the working mechanisms of many machine tools, presses, agricultural, construction, lifting and other machines. It is distinguished by high efficiency with low energy consumption. Hydraulics are quite reliable in operation and rarely fail. However, even the most durable mechanisms are subject to wear and tear. And then the question arises of repairing and replacing broken parts. Today, purchasing spare parts for hydraulic motors and other hydraulic equipment in Moscow is not difficult. But is it worth turning to unverified suppliers and buying the first components you come across? The hydraulic system is a complex device, and only the balanced operation of all components will ensure its optimal operation and long service life.

Hydraulic equipment repair

The main cause of breakdowns of hydraulic equipment is violations of operating rules, untimely prevention, installation of non-original components, and the use of low-quality working fluids and oils. Timely replacement of filters and use of proven lubricants are guaranteed to extend the service life of equipment. If there is any malfunction of the device, even minor ones, you should stop working and contact a service center. Major repairs of hydraulic equipment are always expensive, so it is much easier and cheaper to carry out regular diagnostic checks. This is an affordable service that will save the equipment owner from many troubles and save time and money.

Choosing a service center

Today in Moscow, offers for maintenance and repair of hydraulic equipment come from many companies. Which one should you trust with your equipment? Not every company is able to carry out inspections and repairs with the highest quality possible. When choosing a contractor, you should pay attention to his work experience and the availability of original spare parts. Don't chase cheap offers. Poor quality repairs of hydraulic pumps and motors will negatively affect the operation of the entire hydraulic system and will quickly lead to a new breakdown. Trust your equipment only to highly qualified professionals.

Our offers

Our company diagnoses and repairs hydraulic motors, hydraulic pumps, hydraulic distributors and hydraulic cylinders of all types. When replacing, only original parts are used.

• Professional repair of hydraulic motors includes its disassembly, cleaning, and defective parts. After identifying worn parts and replacing them with new ones, the units are ground in and fine-tuned.
• Repair of hydraulic pumps involves replacing worn parts: piston groups, rubber parts, thrust bearings, pumping unit.
• When repairing hydraulic valves, special attention is paid to the alignment of the holes. If necessary, spool valves and other shut-off and control elements are replaced and ground into the holes.
• During the repair of hydraulic cylinders, the rubber parts of the rod, piston, and liner are replaced.

All diagnostic and repair work is performed by experienced, highly qualified specialists. Our company has a license to carry out these types of work and carries out them in accordance with all requirements.

You have the opportunity to diagnose hydraulic equipment, order preventative or major repairs, and purchase original spare parts for any hydraulic devices. We provide a guarantee for all types of work performed by us and for all components purchased from us.

Repair of hydraulic equipment is carried out in a specialized workshop, less often - at the site of operation.

Auto repair shops use various power equipment, which is based on hydraulics, or more precisely a hydraulic cylinder and a hydraulic pump. Hydraulic cylinders are available in direct and reverse action. In direct-acting cylinders, the rod comes out of the cylinder under the action of hydraulic fluid, while in reverse-acting cylinders, on the contrary, it is pulled into the cylinder. Pumps are most often found in three types: manual, pneumohydraulic, electrohydraulic. In hand pumps, pressure is generated by the force applied to the handle and transmitted to the plunger.

In pneumatic-hydraulic pumps, the force is transmitted to the plunger due to the reciprocating movement of the air motor. Electro-hydraulic pumps are most often used in car lifts, sometimes in presses and tire changers. and are more productive than those listed above. As a rule, they consist of an electric motor with a power of 2-3 kW, a valve block, and a gear pump, which creates pressure in the hydraulic system. An integral part of any hydraulic system are high-pressure hoses through which oil flows from the pump to the cylinder

Main types of hydraulic equipment malfunctions.

1 Failure of the hydraulic cylinder hose. This is the simplest malfunction that occurs due to aging of the hose, or increased pressure in the system, or as a result of mechanical stress. Eliminated by replacing the hose with a new one.

2 Hydraulic cylinder malfunction. Most often it manifests itself in the form of a hydraulic cylinder leaking through seals (rubber and polyurethane rings or cuffs). A leak can be caused by various reasons: wear of seals, wear or mechanical damage to the rod, wear or damage to the piston, corrosion of the hydraulic cylinder.

3 Hand pumps are used mainly in presses, body hydraulics, and traverses of four-post lifts. The most common malfunctions are: leakage of the plunger pair, leakage, malfunction of the bypass valve.

4 Pneumatic hydraulic pumps are used in power body hydraulics, traverses, and presses. Among the malfunctions there are problems with both the pneumatic and hydraulic parts. Among the pumps of this system, cases of non-repairability or unprofitability of repair most often occur.

5 Electro-hydraulic pumps have found very wide application. Relatively often, the electric motor, pump coupling, gear pump, and drain valve fail in them.

Our company carries out repairs of hydraulic equipment for car service centers. We are returning to service:

Hydraulic transmission struts;

Jacks;

Traverses;

Hydraulic cylinders for lifts;

Hydraulic pumps of all types, including pneumatic pedals and pneumatic hydraulic pumps;

Hydraulic taps;

Call - our prices will suit you!

We offer hydraulic repairs of the following brands:

A.E.T. Stankoimport

AMGO. Atis. A.G.M. Armada

Beissbarth. Bendpack. Brann. Hofmann

Gruber&Stein. Kraftwell. Launch. MAHA

Nordberg. Nussbaum. OMA. OMAS

Orlandini. PEAK. ProTech. Ravaglioli (RAV)

Red Line Premium. Remax. Rotary. Safe

SIVIK. Silverline. SLIFT. Space Stenhoj

Stertil Koni. Titan. Torin. Trommelberg

Velyen. Werther. ASO Pskov. INCOST

Techno Union. Storm Sorokin. RST

Other hydraulics from unknown manufacturers

The company GIDROTEMA LLC specializes in the repair of hydraulic cylinders in Moscow and the Moscow region. Products from such manufacturers as: , .

Urgent repair of hydraulic cylinders is an urgent need for those industries that use hydraulic drives. Such equipment is used in special equipment operating in the construction, road-building industries, mining, processing and transport enterprises. Among the mechanisms that need restoration are car transporters, asphalt pavers and truck cranes, forklifts and concrete pumps, bunker trucks and tail lifts, loader cranes and garbage trucks, tractors, excavators and a variety of types of agricultural machinery.

The company "GIDROTEMA" LLC carries out restoration of telescopic devices with the following parameters: diameter - up to 2000 mm, rod length - up to 16000 mm.

The procedure for repairing hydraulic cylinders in Moscow and the region

Professionals from Gidrotema with extensive experience are able to perform accurate diagnostics, select the necessary spare parts and bring to life the failed mechanism. In this case, the customer receives not only high-quality work, but also a reasoned cost calculation, post-repair testing on a test bench and advice on the further operation of hydraulic equipment.

The accuracy of price calculations is due to professionally performed diagnostics and troubleshooting of equipment. Depending on the degree of wear of parts and components, the complexity of the damage, the range of measures for repairing hydraulic cylinders includes the following operations:

• dismantling of hydraulic equipment and detailed disassembly;
• inspection, diagnostics and defect detection;
• cleaning surfaces from lubricants and other dirt;
• replacement of defective, obsolete and unsuitable pistons, rods, liners;
• checking and replacing seals;
• surface restoration;
• production of turning and welding works;
• assembly and installation of hydraulic cylinder;
• checking performance and technical characteristics on a test bench.

Only imported products and blanks are used as spare parts, assemblies and blocks: delivery is carried out from Romania and Italy.

Repair deadlines:

• defect detection – 1-2 days from the moment the order is received;
• placing a work order and preparing a cost estimate taking into account the cost of work and replacement parts – 4 hours;
• The total time to restore the product is from 1 day.

Hydraulic cylinder repair cost

The warranty period for work performed is from 3 months.