Consumption of EPP technoelast per 1m2. Technoelast EPP. Technical characteristics and modifications of technoelast. Roofing material Technoelast

Technoelast is biostable.

Application area:

Designed for waterproofing buildings, structures and building structures.

Structure:

Technoelast is produced by applying a bitumen-polymer binder on a glass or polyester base on both sides, consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.). Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.

Specifications:

Rolls of material should be stored in a dry, closed area. vertical position in one row in height at a distance of at least 1 m from heating devices.

Brands:

Depending on the type of coating and area of ​​application, Technoelast is available in two grades:

Technoelast K— with coarse-grained coating on the front side and a polymer film or fine-grained coating on the surfaced side of the web; used to install the top layer of waterproofing with protection from sunlight;

Technoelast P— with fine-grained powder or polymer film, or a combination thereof on both sides of the canvas; used for the installation of lower layers in multi-layer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.

EPP

HPP

ECP

TCH

Table of Material Characteristics:

Parameter name		EPP	HPP	ECP	TCH
Thickness (±0.1), mm		4,0	3,0	4,2	4,2
Weight 1 m2, kg, (±0.25 kg)		4,95	3,88	5,25	5,32
Breaking force in longitudinal/transverse direction, N, not less	polyester	600/400	-	600/400	-
	fiberglass	-	-	-	800/900
	fiberglass	-	300/–	-	-
Flexibility temperature on timber R=25 mm and R=10 mm, °C, not higher		-25	-25
Heat resistance, °C, not less		100	100	100	100
Type of protective coating	upper side	film without logo	film without logo	slate	slate
	welded side	film with logo	film with logo	film with logo	film with logo
Length/width, m		10x1	10x1	10x1	10x1
Weight of binder on the welded side, kg/sq.m., not less		2	2,0	2	2
Water absorption for 24 hours, % by weight, no more		1	1	1	1
Waterproof at a pressure of at least 0.2 MPa, for 2 hours		absolute	absolute
Loss of powder, g/sample, no more				1	1
Waterproof for 72 hours at a pressure of at least 0.001 MPa				absolute	absolute
Flexibility temperature** on timber R=25 mm, оС, not higher				-25
Flexibility temperature on timber R=25mm, оС, not higher					-25

Manufacturing jobs:

According to the “Guidelines for the design and installation of roofs from bituminous materials roofing company "TechnoNIKOL", can be used in all climatic regions according to SNiP 23–01.

TechnoNIKOL Corporation offers modern Construction Materials, meeting Russian and European quality standards, which include roofing rolled materials, waterproofing mastics, bitumen, materials for polymer roofing.

Multifunctional SBS (polymer)-modified, weld-on roofing and waterproofing material of increased reliability.
Flexibility on timber R = 25 mm, not higher than - 25 0 C, heat resistance + 100 0 C

intended for installation of roofing carpet of buildings and structures, waterproofing of foundations and other structures with increased requirements reliability in all climatic regions. The element of Technoelast is the cold of the polar night and the constant pressure of man-made groundwater. It is used where other materials are unlikely to provide required level protection from water. Technoelast is always where serious construction projects. It is there where only the highest reliability is needed.

Technoelast review

Technoelast is intended for installing roofing carpets on buildings and structures, waterproofing foundations and other structures with increased reliability requirements in all climatic regions. Technoelast's element is the cold of the polar night and the constant pressure of man-made groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always there where serious construction projects are implemented. It is there where only the highest reliability is needed. Technoelast is produced by applying a bitumen-polymer binder containing bitumen, SBS thermoplastic and fillers to a fiberglass or polyester base. Coarse-grained K, fine-grained coating M and polymer film P are used as a protective layer. Technoelast is fused using a propane torch.

Features of Technoelast

Technoelast is biostable.

Application area

Designed for installation of roofing carpets on buildings and structures and waterproofing of building structures.

Structure of Technoelast

Technoelast is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and filler onto a glass or polyester base. Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.

Technoelst brands

Depending on the type protective layers and areas of application Technoelast is available in the following grades:

TO

With coarse-grained coating on the front side and polymer film or fine-grained coating on the welded side of the web; used for installing the top layer of roofing carpet;

P

With fine-grained powder or polymer film, or a combination thereof, on both sides of the canvas; used for the device of the bottom layer roofing covering and waterproofing of building structures (foundations, tunnels, etc.).

Table Characteristics of Technoelast

800/900

Parameter name		TO	P
Cover type:	top	film	film
bottom	slate	film
Weight, kg./sq.m. no less		5.0	4.6
Tensile strength in longitudinal/transverse direction, N, not less	on polyester	600/400	600/400
	on fiberglass	800/900
	on fiberglass	294	294
Thickness, mm		4.2	4
Water absorption for 24 hours, % by weight, no more		1	1
Weight of binder on the welded side, kg/sq.m., not less		2	2
Loss of powder, g/sample, no more		1
Flexibility temperature on timber R=25mm, оС, not higher		-25	-25
Flexibility temperature on the beam R=10 mm, °C, not higher		-25	-25
Binder brittleness temperature, °C, not higher		-35	-35
Waterproof for 72 hours at a pressure of at least 0.001 MPa		absolute
Waterproof at a pressure of at least 0.2 MPa, for 2 hours			absolute
Length\width, m		10x1	10x1
Heat resistance, °C, not less		100	100

Manufacturing jobs

according to the “Guidelines for the design and installation of roofs made of bituminous materials of the TechnoNIKOL Corporation”, can be used in all climatic regions in accordance with SNiP 23-01.

Reading time ≈ 3 minutes

Technoelast is a built-up roofing material for the construction of flat roof, protection of building structures from negative impact water. It has high strength and elasticity: it retains flexibility at a temperature of minus 25 degrees, ductility at -40 degrees. Thanks to such properties and positive customer reviews, it is popular in different regions, but is widely used in northern regions, areas with high ground pressure.

Basis of this material are fiberglass, fiberglass, polyester. They are coated with bitumen-polymer binder, coarse/fine sprinkles (red, green, gray colors) or polymer film.

Technical characteristics of technoelast

Specifications technoelast grades: EKP, TKP, EPP, HPP:

Main types of technoelast

According to the scope of technoelast and the type of protective level, the following modifications are distinguished:

• Technoelast EPP- polyester-based material with a high-strength protective film. It is very strong and has a stretchable lining level. Used for the base layer flexible roofing, its waterproofing, waterproofing of the floor, foundation, basement, utility rooms;
  • E - polyester
  • P - film
  • P - film
• Technoelast EKP- polyester base with coarse powder and a layer of polymer film. Due to its increased reliability, it is used for the upper level flat roof, roofs of a barn, garage;
  • E - polyester
  • K - baby
  • P - film
• Technoelast HPP- fiberglass base with a protective polymer layer. Used for waterproofing floors, basements, foundations, flat roofs, vapor barriers, garage roofs, utility rooms, pipe insulation;
  • X - canvas
  • P - film
  • P - film
• Technoelast TKP- the base is fiberglass with a polymer film and coarse-grained topping. Suitable for the top level of a flat roof, garage roof, cottage, barn.
  • T - fabric
  • K - baby
  • P - film

There are 2 groups according to purpose:

• Technoelast K- for arrangement of the upper level of the roof. For its production, shale coating is mainly used, which protects against solar ultraviolet radiation;
• Technoelast P- when installing the lower layer of the roof. Fine-grained powder protective film prevent material sticking.

Advantages

• durability - the material is designed to last 30 years;
• elasticity - retains plasticity under serious temperature fluctuations, can be lengthened, stretched, it can be fused to building construction different shapes;
• high quality - high-quality bitumens are used for production;
• reliability - successfully resists mechanical, air, and biological influences;
• Can be used on any surface;
• technoelast has good waterproofing, excellent sound absorption, and retains heat;
• environmental friendliness - does not provide harmful effects to nature, man;
• good adhesion - the artificial rubber in the composition provides strong adhesion to different surfaces;
• ease of installation and installation.

Technoelast, like most built-up roofing materials, consists of:

• bases (fiberglass, fiberglass or polyester) - ensures the durability of the roofing;
• SBS-modified bitumen binder, increasing performance characteristics material;
• polymer film with the manufacturer's logo on the bottom side, protecting the canvas from mechanical damage, gluing the turns together, and also serving as an indicator of sufficient heating when fusing the material;
• polymer film on the top side (in the case of lower layers of material) or slate topping gray, designed to protect bitumen binder from ultraviolet radiation and mechanical damage during operation.

Technoelast differs from other materials for soft roofs more sophisticated production technology and quality of materials used. Artificial rubber added to bitumen provides elasticity when low temperatures and heat resistance at elevated temperatures. The reinforced base is not subject to rotting and retains its strength characteristics throughout its service life.

Relatively high price for waterproofing Technoelast is compensated by improved technical parameters:

Characteristic	Unit change	Technoelast	Economy class waterproofing
Heat resistance
Flexibility temperature
Breaking force no more
Lifetime

Technoelast is marked with three letters, which mean:

• first - base type: E - polyester, X - fiberglass, T - fiberglass;
• the second is the type of coating of the upper surface: P - polymer film, K - coarse-grained slate coating;
• third - coating material with inside: P - polyethylene film.

Application

Technoelast is intended for waterproofing:

• roofs;
• interfloor ceilings;
• foundations;
• basement walls;
• underground tanks;
• swimming pools;
• main pipelines;
• other building structures and structures.

For the installation of lower layers roofing pie Technoelast is used, both sides of which are covered with film, for upper layers- material with a film on the bottom and shale chips on top.

Technoelast has the following advantages:

• absolute waterproofness;
• high tensile strength - Technoelast based on polyester and fiberglass is stronger than similar ones budget materials by 15%;
• durability - the synthetic base is not subject to rotting, bitumen is not afraid of chemical exposure active substances, mineral chips reliably protect Technoelast from ultraviolet radiation;
• Possibility of use in any climatic zones- Technoelast can withstand temperatures up to +100 o C;
• simple installation technology, the ability to perform work in winter;
• affordable price - Technoelast is cheaper than most roofing materials.

It is beneficial to use Technoelast. Budget roll materials last up to five times less than Technoelast, their price per m 2 is only 2 times less.

Technoelast from Ant-Snab company

If you decide to buy Technoelast in Moscow from the Ant-Snab company, the price will pleasantly surprise you. We work without intermediaries, we receive Technoelast directly from TechnoNIKOL factories. Discounts are provided for large quantities purchased. Payment can be made in cash or by bank transfer.

To buy Technoelast from Ant-Snab, you should:

• choose a brand of roofing covering that meets the conditions of use;
• calculate the need for materials using the online calculator available on the website;
• fill out the order form;
• agree on terms of payment and delivery;
• If you have any questions, call our consultants.

Delivery by company transport is carried out within 1-3 days after placing an order within the Moscow region. By prior arrangement, it is possible to unload goods and lift them to the floor. To take out roofing materials independently, you should agree on the shipment date and method of payment. Come. Call. We are waiting for your orders.

Technoelast, like most built-up roofing materials, consists of:

• bases (fiberglass, fiberglass or polyester) - ensures the durability of the roofing;
• SBS-modified bitumen binder, which improves the performance characteristics of the material;
• polymer film with the logo of the manufacturer on the bottom side, protecting the canvas from mechanical damage, gluing of turns to each other, and also serving as an indicator of sufficient heating when fusing the material;
• polymer film on the upper side (in the case of lower layers of material) or gray slate coating, designed to protect the bitumen binder from ultraviolet radiation and mechanical damage during operation.

Technoelast differs from other materials for soft roofs in its more complex production technology and the quality of the materials used. Artificial rubber added to bitumen provides elasticity at low temperatures and heat resistance at elevated temperatures. The reinforced base is not subject to rotting and retains its strength characteristics throughout its service life.

The relatively high price of Technoelast waterproofing is compensated by improved technical parameters:

Characteristic	Unit change	Technoelast	Economy class waterproofing
Heat resistance
Flexibility temperature
Breaking force no more
Lifetime

Technoelast is marked with three letters, which mean:

• first - base type: E - polyester, X - fiberglass, T - fiberglass;
• the second is the type of coating of the upper surface: P - polymer film, K - coarse-grained slate coating;
• third - coating material on the inside: P - polyethylene film.

Application

Technoelast is intended for waterproofing:

• roofs;
• interfloor ceilings;
• foundations;
• basement walls;
• underground tanks;
• swimming pools;
• main pipelines;
• other building structures and structures.

To construct the lower layers of the roofing pie, Technoelast is used, both sides of which are covered with film; for the upper layers, a material with a film on the bottom and slate chips on top is used.

Technoelast has the following advantages:

• absolute waterproofness;
• high tensile strength - Technoelast based on polyester and fiberglass is 15% stronger than similar budget materials;
• durability - the synthetic base is not subject to rotting, bitumen is not afraid of the effects of chemically active substances, mineral chips reliably protect Technoelast from ultraviolet radiation;
• possibility of operation in any climatic zones - Technoelast can withstand temperatures up to +100 o C;
• simple installation technology, the ability to perform work in winter;
• affordable price - Technoelast is cheaper than most roofing materials.

It is beneficial to use Technoelast. Budget roll materials last up to five times less than Technoelast, their price per m 2 is only 2 times less.

Technoelast from Ant-Snab company

If you decide to buy Technoelast in Moscow from the Ant-Snab company, the price will pleasantly surprise you. We work without intermediaries, we receive Technoelast directly from TechnoNIKOL factories. Discounts are provided for large quantities purchased. Payment can be made in cash or by bank transfer.

To buy Technoelast from Ant-Snab, you should:

• choose a brand of roofing covering that meets the conditions of use;
• calculate the need for materials using the online calculator available on the website;
• fill out the order form;
• agree on terms of payment and delivery;
• If you have any questions, call our consultants.

Delivery by company transport is carried out within 1-3 days after placing an order within the Moscow region. By prior arrangement, it is possible to unload goods and lift them to the floor. To remove roofing materials yourself, you must agree on a shipment date and payment method. Come. Call. We are waiting for your orders.