House project red master 144. Album I. Architectural, construction, sanitary and electrical drawings. The complete house plan includes

104.0 m2 62.8 m2

Print the projectMirror reflection

Floor plans




Characteristics

• total area
  104.0 m2
• Built-up area
  130.0 m2
• Dimensions
  10.0x13.0 m
• Number of storeys
  1
• Bathrooms and bathrooms
  2

Constructions

• Foundation type
  prefabricated / monolithic strip
• Exterior walls
  foam blocks / aerated concrete + insulation
• Floor type
  floor slabs / wooden beams
• Roof
  metal tiles, flexible tiles, ondulin, etc.

Project KO-144

Architectural solutions

An architectural project is a standard set of design documentation required to coordinate a house project with the district administration and obtain permission to build a house on an allocated plot of land.

The complete house plan includes

A set of drawings on the basis of which the construction of a house is carried out. Contains detailed information about the technology and stages of building a house, from the foundation to the roof ridge. Consists of design drawings, assemblies and parts, statements and specifications of materials for purchase.

Includes sections: water supply and sewerage, heating and ventilation, electricity supply. At the design stage, they allow you to select the appropriate characteristics of engineering equipment and calculate effective communications laying schemes.

Additional changes to the project

Project preparation time

2-3 days.

Free delivery to the Republic of Belarus and the Russian Federation

What is included in a house project? What documents are needed to build a house?

Project documentation for the construction of a house consists of:

— Architectural project — section “Architectural solutions” (AR);

— Construction project — includes the section “Constructive solutions” (CD);

— Sections of engineering communications — Heating and ventilation (HV), water supply and sewerage (VS), electricity supply (ES).

The “Architectural Solutions” (AD) section is required for approval of the project by local executive bodies and the development of a Land Development Project, which includes a General Plan for the site. The section “Constructive solutions” is necessary directly for construction, because contains information about the technology of construction and design of foundations, walls, window and door lintels, floors, and roofs.

Are utility sections necessary for building a house?

The presence of sections of engineering communications in addition to the Construction Project allows, before the start of construction, to determine as accurately as possible the final cost of building a house without taking into account the interior decoration. Of course, the standard layout of communications is not always suitable for clients who want to think through their own interior design. Therefore, even for ready-made projects from the catalog, sections of engineering communications are developed individually, based on the standard technical specifications. Moreover, the cost of such a project is lower than for an individual project due to its reusability.

I need a gas project, can you develop it?

The development of design documentation for gas supply to a residential building is carried out by specialized organizations that have the license and permits necessary for this type of activity. To select such an organization, in order to avoid future problems when approving the project, it is better to contact the administration of the construction area.

How to purchase a ready-made house project?

In order to buy the finished house project you like, you need to place an order (leave a request with contact information) on our website in any form convenient for you. The easiest option is to click the “Order a project” button to the right of the floor plans. At the same time, you can also select the necessary sections of the project and indicate the desired changes in the project. After this, a specialist from our company will contact you and clarify additional details. As a rule, we will need passport data to conclude an agreement and issue an invoice for payment. We will also need information about the owner of the site to complete the project. After payment you will be sent the ordered project documentation.

What changes can be made to the project?

It is possible to make any changes to finished projects. The cost of project changes depends on the volume of required adjustments and can be announced to you after their discussion. Minor changes, such as the location and size of window openings, installation of additional partitions or relocation of existing ones, can be made by the Developer independently during the construction process, without registering changes in the project.

What is the best thing to do: choose a project yourself on the website, or come to the office for a consultation?

All ready-made house designs that are currently available for order are presented on the website. If you visit our office to select a project, you will still have to select it from the catalog on the website. We do not store projects in printed form, because... Each project is designed individually in accordance with the developer's documents. Based on the practice of our clients, it is more convenient to take time and familiarize yourself with the catalog on the website in a relaxed home environment.

How quickly can I receive a house project after placing an order remotely?

If you plan to buy a ready-made project without changes, our specialists, within 1-2 days, will prepare the project and organize its delivery by courier service to the door of your home anywhere in Belarus, Russia and neighboring countries.

The period for preparing a project with changes depends on the volume of required adjustments, and can take from 2 to 10 days.

• I. Architectural (dramatic) design

  The preliminary architectural design includes a set of drawings, which is necessary for coordination with the relevant government agencies.

  • Explanatory note (information about the customer, construction site, technical and economic indicators of the object, information about the materials used);
  • House floor plans;
    • Basement or ground floor plan;
    • Ground floor plan;
    • Plan of the second (attic) floor.
  • Color solutions for facades;
  • Incision;
  • Roof plan;
  • Foundation diagram (for reference).

  Constructive decisions

  Architectural and construction project, includes sections Architectural solutions And Constructive decisions, carried out on the basis of accurate calculations, which allows for a significant reduction in construction time and cost. This is achieved through rational consumption of materials, without multiple stocks; modern engineering and design solutions.

  1. Underground structures

  • Foundation layout diagram (formwork; block layout diagram, etc.)
  • Foundation reinforcement schemes.
  • Sections, sections and developments along foundations.
  • Parts and components of waterproofing and insulation.
  • Specification of materials and products.

  2. Structures of the above-ground part

  • Detailed floor plans for walls and partitions. Knots, details.
  • Jumpers: components, details. Product specifications.
  • Floor diagrams of prefabricated, monolithic floors. Units, parts, reinforcement schemes.
  • Monolithic sections, beams, belts. Units, parts, reinforcement schemes.
  • Columns. Units, parts, reinforcement schemes.

  3. Roof and roof structures.

  • Scheme of the rafter system. Sections, nodes, details for the rafter system diagram.
  • Specification of rafter system elements.
  • Roof plan. Sections, components, details for the roof plan.
  • Specification of roof elements.

  Engineering Communication

  1. Water supply and sewerage (WSC)

  • Floor plans:
    • Pipeline layout: cold and hot water supply; domestic sewerage;
    • Arrangement of plumbing fixtures and auxiliary equipment;
  • Axonometric diagrams of water supply and sewerage systems;
  • Water metering unit diagram;
  • Specification of materials and products: taps, pipelines, sleeves, manifolds, fasteners, etc.

  2. Heating and ventilation (HV)

  • General instructions for the project;
  • HVAC system plans showing:
    • Location of heating devices;
    • Pipeline sections;
    • Elements of the ventilation system;
    • Scheme of “warm floor”, “warm walls”
  • Calculated hydraulic diagram of the heating system indicating the installation settings of the valves;
  • Axonometric diagram of the ventilation system;
  • Piping units for heating devices and other units;
  • Specification of boiler, heating and ventilation equipment.

  3. Power supply and electric lighting (ES)

  • Schematic diagram of the power supply and group network of the switchboard;
  • Electric lighting network plans;
  • Outlet network plans;
  • Distribution network plans;
  • Potential equalization network plans;
  • Power electrical equipment;
  • Roof plans. Lightning protection;
  • Specification of equipment and materials.

Development “Z144” is a project of a one-story house with a garage for two cars and the possibility of creating an attic floor.

The design of a one-story house will certainly attract the attention of adherents of the practicality of one-level interiors. A completely closed kitchen will hide the features of the owner’s life from the rest of the daytime area. The location of the kitchen on the courtyard side and the presence of an additional exit to the terrace near the kitchen is very convenient for organizing breakfast, lunch or dinner in the fresh air, without leaving the house. Some covered part of the terrace will serve as an excellent place for summer relaxation near the house. Sufficient glazing areas in the day area will guarantee excellent natural light in all rooms throughout the day and create an indescribable feeling of harmony with the surrounding nature. The technical room located behind the garage for two cars is convenient for using and storing garden tools and other equipment, and also contains laundry equipment. If necessary and desired by the owners, it can be reduced or increased in size. A direct transition from the house to the garage through a passing vestibule will make it easier to unpack and carry purchases from the car. The pantry located in the kitchen is practical enough to store essential kitchen appliances and supplies. The spacious bathroom is connected to the laundry room for maximum convenience. One of the two bedrooms has a small private bathroom and access to the terrace. At the request of the customer, it can be redesigned into a shared bathroom. The second, smaller bedroom also has access to the terrace, making it more comfortable, bright and modern. The presence of the possibility of arranging an attic will contribute to an increase in living space, and will also provide the opportunity to carry out construction work in stages, to the extent possible.

The indicated price for the project presented above includes:
House made of timber "Under the roof"

Short description:

1) Designing a house.
2) Installation of the foundation.
3) Delivery to the customer’s site.
4) Assembly of the wall house kit.

Detailed description:

1) Designing a future home is the most important step in construction! The strength and reliability of the future structure will depend on the correctness of the calculations. In order for a house to last for decades and delight its owners, everything needs to be carefully thought through at the design stage.
You will be required to be fully involved in the process and constantly discuss and approve details.
It is better to spend time at the design stage than to lose many times more time and money at the construction stage!
Take care of your safety at the initial stage of construction - entrust the development of project documentation to professionals!

2) Foundation:
Topographic survey (geodesy) site marking.
Geological studies of soil.
Bored piles 250x250x2000 (h) mm.
Monolithic reinforced concrete grillage 300x400 (h) mm.

3). Delivery to the customer's site:
Internal and external walls, roof structure (truss), roofing (finish flooring), other materials such as jute necessary for assembling the house kit.
With unloading by crane board on site.
All lumber arrives packaged in specialized protective packaging.

4). House wall kit:

1. Design drawings. Documentation required for registering a building with the BTI. Explication of premises.
2. Production of timber using high-precision equipment. Northern forest of the Perm region.
3. The size of the timber is 200×185. Internal partitions made of timber 200×185.
4. Unloading the log house at the construction site. Rolling out and preparing walls for the assembly of a log house.
5. Assembly of the log house by an experienced and qualified team.
6. The timber is assembled onto wooden dowels at the connecting points and along the length of the timber according to the house assembly technology.
7. Inter-crown insulation - flax fiber.
8. Complete set and assembly with special fasteners: staples, tapes, knitting needles, jacks (shrinkage compensators).
9. Floor joists: material timber 100×200. Installation of logs in 60 cm increments (under the insulation).
10. Ceiling joists: material timber 50×200. Installation of logs in 60 cm increments (under the insulation).
11. Gables made of timber with a cross-section like a wall kit.
12. Technical supervision for quality control of material and installation work, working on the customer’s side!
13. Treatment of wall mass and lumber with a fire-bioprotective composition.

Drawings of the main set of the AR brand
Total information
First floor plan. Cellar plan
Second floor plan
Notes on plans
Facade 1 - 3. Facade 3 - 1
Facade A - G. Facade G - A
Cut 1-1
Table of average design loads
Layout of foundation elements
Sections by foundations
Layout of floor elements at elevation. 0.000
Sections to the layout of floor elements
Monolithic sections UM-1, UM-2
Layout of floor elements at elevation. 2.480
Layout of floor elements at elevation. 5.300
Sections to the layout of floor elements
Reinforcing products
Ladder L1
Staircase L1. Details
Flight of stairs LM1
Stair railing OG1, OG2
Staircase L1. Details
Specification of elements for staircase L1
Ladder L2
Ladder LP1. Manhole covers KP1, KP2, KP3
Fastening units for ladder LP1 and manhole covers KP1, KP2, KP3
Entrance porch KR1
List and specification of jumpers
Wall scan along axis B with ventilation ducts
Layout of coating elements
Cuts 1-1, 2-2. Nodes 1, 2 of the layout of coating elements
Cut 3-3. Nodes 5, 6 of the layout of coating elements
Nodes 3, 4, 7 of the layout of coating elements
Roof units 1 - 5
Roof plan
Schemes for filling window openings. Joinery Specification
Individual window OK-4
Individual window OK-3
Individual window OK-5 with louvered filling
Wardrobe Ш-1
Floor plans. Explication of floors
Interior finishing list
List of finishing of premises. Facade finishing list
First and second floor plans. Option for hot water supply from a gas heater
Basement plan. Hot water supply option from a solid fuel water heater
First and second floor plans. Hot water supply option from a solid fuel water heater
Cut 1-1. Option with basement
Floor plans. Explication of floors (option)
Layout diagrams of foundation elements (option)
Layout diagrams of basement wall elements (option)
Sections for foundations (option with basement)
Option for foundations on heaving soils
Layout of floor elements at elevation. 0.000 (option with basement)
Layout of floor elements above the basement. Sections
Layout of floor elements at elevation. 2.800 (optional)
Layout of floor elements at elevation. 5.300 (optional)
Units and parts for floor layout diagrams (option)
List and specification of jumpers (option)
Fencing of subscriber node OG-1 (approximate solution)
Furniture arrangement option
Facade options
List and specification of lintels (for façade option 1)
Porch KR-2 for facade option 1
Options for attached buildings, architectural elements and details (facades)
Blocking options
Variant of attached buildings, architectural elements and details. Scheme
Drawings of the main set of the VK brand
Total information
Floor plans. Scheme B1, T3, T4, K1
Floor plans. Scheme B1, T3, T4, K1 (option with gas water heater VPG-20)
Floor plans (option with solid fuel boiler KS-TG-20V)
Scheme B1, T3, K1 (option with solid fuel boiler KS-TG-20V)
Equipment Specifications
Drawings of the main set of brand OV
Total information
Floor plans
Floor plans (option with Universal-20 convectors)
Floor plans (option of a decentralized heating system from a small gaseous fuel boiler)
Floor plans (option of a decentralized heating system from a small-sized solid fuel boiler)
Heating system riser diagrams (radiator and convector options)
Heating system diagrams (option of a decentralized heating system from a small-sized gaseous fuel boiler)
Heating system diagrams (option of a decentralized heating system from a small-sized solid fuel boiler)
Subscriber node
Plan of the combustion chamber. Installation and wiring of a small-sized solid fuel boiler
Hardware Specification
Drawings of the main set of the GSV brand
Total information
1st floor plan, gas pipeline diagram (basic version)
1st floor plan, gas pipeline diagram (option with a column)
2nd floor plan (option with column)
1st floor plan (solid fuel option)
1st floor plan (non-blocking option)
Hardware Specification
Drawings of the main set of brand E
Total information
First floor. Second floor. Basement. Cellar. Location plans
Hardware Specification
Drawings of the main set of SS brand
Total information
First floor plan, second floor plan with radio networks
Hardware Specification

Project Z144 is designed as a one-level house with a garage for two cars. The style combines classic architecture and modernity. The attic provides space for arranging your own world. Using it and expanding the living space allows you not to rush with construction work, but to do it thoroughly, step by step.

The benefits of the Z144 design are obvious to people who prefer to have only one floor in their home. A closed kitchen area separates household details from the relaxation space. It is located on the garden side, with access to the terrace nearby. This design helps set the table for dinner or have a tea party outdoors. The terrace is not fully covered; the portion under the roof is quite suitable for relaxing near the house during the warm season.
Large-scale glazing is the key to optimal daylighting of the internal home space, forming unity with the external natural world. The kitchen has a built-in pantry. This is mainly from the practical side when storing supplies and kitchen utensils. The bathroom and laundry space are connected to each other, which increases the comfort of the home.

All bedrooms communicate with the terrace, this increases illumination, adds comfort and modernity. One has its own small bathroom. The owners can use it as a common one if there is such a plan.

The house communicates directly with the garage building; with this layout, moving objects from the car to the home is faster and more convenient. Behind the garage there is a technical storage room for storing technical equipment, devices, and fixtures. Its volume can be varied according to the wishes and needs of the owner.