An example of a commercial estimate for an apartment renovation. Estimate documentation. Total at estimated costs
![An example of a commercial estimate for an apartment renovation. Estimate documentation. Total at estimated costs](/uploads/ec16054581a82b5c2badf1d14ef28c4f.jpg)
Estimate is one of important documents from which the repair, construction or reconstruction of any object begins. Drawing up an estimate for apartment renovation is a mandatory procedure that is primarily necessary for the Customer. This fundamental document must be prepared as an annex to the contract.
ORDER AN APARTMENT RENOVATION
Calculation of estimates for apartment renovations is carried out by a specialist - estimator. To begin with, our specialist goes to the repair site, inspects the premises, takes measurements of the premises, gets acquainted with the condition of the floors, ceilings, walls, windows and doors, finds out the individual wishes of the Customer and receives technical specifications.
Based on all the information received and measurements of the premises, project documentation and an estimate is drawn up for major renovation apartments. You can, perhaps, do without an estimate only if you are carrying out small redecorating or partial renovation of the interior. But still, an estimate is always needed; a description of the types of work included in the estimate undoubtedly gives a number of advantages when working on construction site during repairs. Thanks to the preliminary estimate, the Customer receives detailed information on the list of types of work and materials required for repairs, and also sees an accurate calculation of the cost of these finishing works and materials.
A typical commercial estimate does not look like an Excel table, which must indicate the types of work, units of measurement and cost. Our company uses the services of experienced estimators; we also constantly monitor prices for building materials, which allows us to significantly save money.
You, as a customer, have the opportunity to control the progress of work and expense items. When choosing a contractor to carry out work, it is the analysis of the estimate that gives a complete picture of the cost of the work and allows you to evaluate the professionalism of the contractor.
We can immediately tell you that prices for comprehensive repairs are significantly lower than for individual species works Each order is individual! The cost of services depends on the types of work and their volume. Moreover, the larger the volume, the lower the price for repairs. Finishing work.
Sample estimate for finishing work
No./pos. |
Name of works |
unit. |
Quantity |
Price, rub |
Amount, rub |
Dismantling work, garbage removal |
|||||
Cleaning |
|||||
Cleaning walls down to concrete (from wallpaper, putty) |
|||||
Cleaning the ceiling down to the concrete (high-pressure paint, putty |
|||||
Cleaning the floor down to concrete (from the old coating) |
|||||
Other dismantling |
|||||
Dismantling the baseboard |
|||||
Taking out the trash |
|||||
Removal of construction waste |
|||||
Electrical work |
|||||
Wiring of electrical, telephone and television networks in walls and ceilings |
|||||
Installation of sockets, switches, spotlights, automatic machines |
|||||
Plastering walls and leveling the floor (screed) |
|||||
Primer for concrete walls and ceilings |
|||||
Leveling ceilings (improved plaster) |
|||||
Wall leveling (improved plaster) |
|||||
Painting works |
|||||
Wall putty |
|||||
Ceiling putty |
|||||
Pasting walls vinyl wallpaper |
|||||
Ceiling painting water-based paint in 3 layers |
|||||
Cleaning and painting pipes with heat-resistant paint |
|||||
Carpentry work |
|||||
Laying the ceiling cornice, filling and painting (foam or polyurethane, width up to 3 cm) |
|||||
Tile work |
|||||
Masonry ceramic tiles on the floor |
|||||
Cleaning |
|||||
Repeated cleaning throughout the renovation and at the end of the renovation |
|||||
Total for finishing work: |
|||||
CUSTOMER |
CONTRACTOR |
||||
__________ |
__________ |
Sample estimate for rough material
No./pos. |
Name |
unit. |
Price according to estimate, rub |
Estimated amount, rub |
|
Materials according to the main estimate |
|||||
Plaster mixture "Rotband" |
|||||
Betonokontakt mixture, 5kg |
|||||
Insulating tape |
|||||
Mounting boxes |
|||||
Junction boxes |
|||||
Alabaster G-5 ( gray) 20kg each |
|||||
Copper wire in double insulation PUNP 3x1.5 |
|||||
Copper wire in double insulation PUNP 3x2.5 |
|||||
Putty "Vitonit-LR" (Fin.) |
|||||
Ready-made finishing putty SHEETROCK 5.6kg (3.5l) ready-made putty |
bucket 3.5l |
||||
Primer deep penetration, canister 10l |
|||||
Latex-based water-based paint Fincolor Euro-7, white matte 9l |
|||||
Tile adhesive Fliesenkleber KNAUF, 25kg |
|||||
Polyethylene rolls 3 m wide |
|||||
Dowels, screws, self-tapping screws, nails, bolts and other fasteners |
|||||
Consumables and auxiliary materials, one-time tool |
|||||
Total for construction and finishing materials |
|||||
Fare, loading work, overhead costs, Unexpected expenses, tool depreciation, budgeting, etc. from the cost of materials |
|||||
Total from transport costs and other expenses |
|||||
Dismantling, construction and finishing works, waste removal |
|||||
|
TOTAL estimated costs |
|
|
|
59749 |
CUSTOMER |
CONTRACTOR |
||||
__________ |
__________ |
To roughly calculate the cost of renovation of premises, use our online calculator. On our online repair cost calculator, you can calculate approximate cost repair work with rough materials. You just need to choose the type of repair (cosmetic repairs, major repairs, European-quality renovation), select the name of the room in which you are going to make repairs, then enter the area of the room in square meters by gender, and the rest Online calculator it will calculate everything itself and display it in the column Total approximate estimated cost your renovation of premises.
Premises renovation cost calculator - online
If you do not want to manually calculate the floor area or you did not understand something when describing the calculations, then you can use our calculator and calculate floor or ceiling area automatically.
For calculation it is necessary measure in meters length, width of the room and enter the data in order by filling out the form and you will automatically receive a calculation floor or ceiling area in square meters.
Calculator for calculating floor and ceiling area
N let's keep you busy mathematical calculations. You just need to measure the basic parameters, and the wallpaper calculator itself will roughly calculate required quantity wallpaper for your room. Those who want more accurate calculations and measurements can read the article above How to calculate how much wallpaper you need.
Sample of a ready-made estimate for repair and finishing work in an apartment with total area 64 m2 new building at the address: Residential complex "Finsky-Potapovo microdistrict 3A".
Estimate No. 4 for repair and finishing work
Estimate for the purchase of rough materials
№ | Name of works | Unit change | Qty |
Price in rub. |
Price in rub. |
Dismantling works | |||||
1 | Joining ceiling seams(Rustov) | p.m. | 8 | 150 | 1200 |
2 | Dismantling sockets, switches, lamps | PC. | 12 | 75 | 900 |
3 | Dismantling the electrical panel assembly | PC. | 1 | 650 | 650 |
Total: | 2 750 | ||||
Construction works | |||||
1 | Laying partitions from tongue-and-groove blocks or foam concrete up to 100 mm thick | sq.m | 5,8 | 420 | 2436 |
2 | Metal jumper device | p.m. | 2 | 280 | 560 |
3 | Construction of a bathtub screen made of blocks | PC. | 1 | 1100 | 1100 |
4 | Vapor thermal insulation device ("penofol", "penoplex") balcony - floor, ceiling, walls | sq.m | 27 | 360 | 9720 |
5 | Coating thermal insulation device "Akterm" | sq.m | 0 | 180 | 0 |
6 | Waterproofing of joints adjacent to the street | sq.m | 6 | 185 | 1110 |
Total: | 14 926 | ||||
Painting and plastering works | |||||
1 | Plastering walls (along beacons) up to 20 mm | sq.m | 25 | 385 | 9625 |
2 | Leveling walls (usually) up to 10 mm - rooms, kitchen, corridor, storage room | sq.m | 154,5 | 200 | 30900 |
3 | Leveling ceilings (usually) up to 10 mm kitchen, corridor, pantry, balcony | sq.m | 28 | 250 | 7000 |
4 | Sealing ceiling seams (rusts) | p.m. | 8 | 150 | 1200 |
5 | Surface primer (2 layers) ceiling, walls | sq.m | 0 | 60 | 0 |
6 | Final sanding surfaces - ceiling, walls | sq.m | 0 | 45 | 0 |
7 | Puttying ceilings for painting (set of works) kitchen, corridor, pantry, balcony | sq.m | 28 | 350 | 9800 |
8 | Painting ceilings with high-quality paint in 2 times | sq.m | 28 | 180 | 5040 |
9 | Puttying walls for painting (set of works) | sq.m | 154,5 | 280 | 44805 |
10 | Painting walls with high-quality paint in 2 times | sq.m | 154,5 | 140 | 21630 |
11 | Plastering window slopes up to 300 mm | p.m. | 15 | 260 | 3900 |
12 | Puttying slopes for painting (set of works) | p.m. | 15 | 280 | 4200 |
13 | Painting slopes with high-quality paint in 2 times | p.m. | 15 | 180 | 2700 |
14 | Installation of arched painting corners with sealing of seams and joints | p.m. | 22 | 65 | 1430 |
15 | Painting of pipes with a diameter of up to 50 mm | p.m. | 26 | 120 | 3120 |
Total: | 145 350 | ||||
Carpentry work | |||||
1 | Installation door block (ready set) | PC. | 5 | 3000 | 15000 |
2 | Device slatted ceilings(up to 10 sq.m) | sq.m | 4,4 | 880 | 3872 |
3 | Installation plastic window sills up to 300 mm | p.m. | 4,5 | 750 | 3375 |
Total: | 22 247 | ||||
Tile work | |||||
1 | Wall tiling (size 250-250 mm) bath, toilet | sq.m | 25 | 850 | 21250 |
2 | Hatch installation | PC. | 1 | 418 | 418 |
3 | Construction of a tile hatch (with installation of a mechanism) | PC | 1 | 1100 | 1100 |
4 | Laying tiles on the floor (size 300-300 mm) bath, toilet, balcony | sq.m | 10 | 700 | 7000 |
5 | Drilling holes in tiles | PC. | 12 | 160 | 1920 |
6 | Grouting ceramic tiles (monocolor) | sq.m | 35 | 100 | 3500 |
7 | Trim sills made of tiles | p.m. | 1 | 1000 | 1000 |
Total: | 36 188 | ||||
Floor installation | |||||
1 | Waterproofing floors in bathrooms | sq.m | 4,4 | 185 | 814 |
2 | Leveling screed device up to 3 mm | sq.m | 54,4 | 150 | 8160 |
3 | Laying laminate (with backing) | sq.m | 54,4 | 280 | 15232 |
4 | Threshold installation | p.m. | 3 | 150 | 450 |
5 | Installation of skirting boards | p.m. | 65 | 130 | 8450 |
Total: | 33 106 | ||||
Ventilation work | |||||
1 | Box in ventilation duct | PC. | 1 | 319 | 319 |
2 | Installation ventilation duct(up to 2 m) | PC | 2 | 1650 | 3300 |
3 | Fan installation (with connection) | PC. | 2 | 308 | 616 |
Total: | 4 235 | ||||
Heating | |||||
1 | Remaking the heating radiator supply unit | PC. | 3 | 4500 | 13500 |
2 | Installing a heating radiator | PC. | 3 | 1500 | 4500 |
3 | Removing/installing the radiator for finishing work (without dismantling the bracket to the finished location) | PC. | 3 | 500 | 1500 |
Total: | 19 500 | ||||
Plumbing work | |||||
1 | Temporary water supply device | set | 1 | 1650 | 1650 |
2 | Installation of a plumbing fine | p.m. | 6 | 600 | 3600 |
3 | Sealing a plumbing hole | p.m. | 6 | 120 | 720 |
4 | Filter installation fine cleaning with pressure regulator | PC. | 2 | 1400 | 2800 |
5 | Collector installation (work package) | PC. | 2 | 2000 | 4000 |
6 | Laying of HGV pipes (m/layer, p/propylene, p/ethylene) | p.m. | 26 | 270 | 7020 |
7 | Pad sewer pipes(PVC) | p.m. | 5 | 330 | 1650 |
8 | Thermal insulation of pipes | p.m. | 26 | 50 | 1300 |
9 | Installation storage water heater(boiler) | PC. | 1 | 3300 | 3300 |
10 | Installation of the Compact toilet | PC. | 1 | 2805 | 2805 |
11 | Installation of "moidodyr" | PC. | 1 | 3000 | 3000 |
12 | Mixer installation | PC. | 1 | 850 | 850 |
13 | Installation hygienic shower | PC. | 1 | 850 | 850 |
14 | Installation of a heated towel rail | PC. | 1 | 3300 | 3300 |
15 | Bath installation | PC. | 1 | 3700 | 3700 |
16 | Installing a Bathtub Faucet on a Rod | PC. | 1 | 1250 | 1250 |
Total: | 41 795 | ||||
Electric installation work | |||||
1 | Installation of fines up to 30x30 mm | p.m. | 16 | 275 | 4400 |
2 | Sealing the fine | p.m. | 16 | 35 | 560 |
3 | Cabling | p.m. | 255 | 50 | 12750 |
4 | Installation of a socket box (with a socket device) | PC. | 33 | 300 | 9900 |
5 | Installation of overhead electrical distribution board | PC. | 2 | 650 | 1300 |
6 | Installation of circuit breakers, differential circuit breakers, RCDs | PC. | 12 | 250 | 3000 |
7 | Installation of socket, switch | PC. | 30 | 130 | 3900 |
8 | Installation of TV, Telephone, Internet sockets | PC. | 3 | 180 | 540 |
9 | Installation of TV, Telephone, Internet splitter | PC. | 1 | 280 | 280 |
10 | Installation of a built-in (spot) lamp | PC. | 6 | 200 | 1200 |
11 | Installation of electric heated floors | sq.m | 2 | 750 | 1500 |
12 | Installation of underfloor heating relay | PC. | 1 | 350 | 350 |
13 | Marking electrical installation locations (without design) | PC. | 33 | 35 | 1155 |
Total: | 40 835 | ||||
Total for work: | 360 932 | ||||
Total according to estimate No. 4: | 360 932 |
Table No. 1 of consumption rough material.
Table No. 1 according to the consumption of construction and finishing rough materials in an apartment with a total area of 64 m2, a new building at the address: residential complex "Finsky-Potapovo microdistrict 3A".
Examples of a table for recording the consumption of rough material
№ |
Name material |
pcs/m2 bags |
price |
general price |
1 | “Rodband” mixture with a layer thickness of no more than 2 cm | 87 | 370 | 32190 |
2 | Sand concrete M300 with a screed layer thickness of no more than 5 cm | 145 | 160 | 23200 |
3 | Lighthouse plaster 0.6 | 45 | 40 | 1800 |
4 | Lighthouse plaster 1.0 | 12 | 45 | 540 |
5 | Betokontakt "EURO" | 3 | 1350 | 4050 |
6 | Primer "Prospectors" | 5 | 450 | 2250 |
7 | Foam block No. 5 in pieces | 6 | 45 | 270 |
8 | Foam block No. 7 in pieces | 84 | 55 | 4620 |
9 | Moisture-resistant plasterboard 12 | 2 | 370 | 740 |
10 | Gypsum putty "Fugenfühler" | 1 | 750 | 750 |
11 | Assembly adhesive for Perlfix blocks | 3 | 320 | 960 |
12 | Tile adhesive "Flizen" | 6 | 350 | 2100 |
13 | Self-leveling floor "Prospectors" | 8 | 320 | 2560 |
14 | Putty "Vetonit" LR+ | 9 | 750 | 6750 |
15 | Spider web "Oscar" 50m2 | 1 | 1150 | 1150 |
16 | Profile 27/28 "Knauf" | 6 | 100 | 600 |
17 | Profile 60/27 "Knauf" | 4 | 130 | 520 |
18 | Finishing putty"Pro Form" | 1 | 1350 | 1350 |
19 | Pendant "Knauf" | 40 | 20 | 800 |
20 | Film -150 density | 60 | 50 | 3000 |
21 | Planed timber 50/50 | 3 | 200 | 600 |
22 | Planed board 150/20 | 3 | 300 | 900 |
23 | Garbage bags | 120 | 10 | 1200 |
24 | Glue for cobwebs "Oscar" | 1 | 1350 | 1350 |
25 | Coating waterproofing "Ceresit 65" | 6 | 750 | 4500 |
26 | Rule 2.5 | 1 | 500 | 500 |
27 | Rule 2.0 | 1 | 400 | 400 |
28 | Rule 1.5 | 1 | 300 | 300 |
29 | Dowel nail 60/40 | 2 | 250 | 500 |
30 | Facade mesh 160 density | 1 | 1250 | 1250 |
31 | Putty "Uniflot-Knauf" | 1 | 1100 | 1100 |
32 | Bucket 12 liters | 2 | 120 | 240 |
33 | Bucket 20 liters | 2 | 180 | 360 |
34 | Tank 60 liters | 1 | 350 | 350 |
35 | Paper masking tape | 5 | 70 | 350 |
36 | Packing tape | 2 | 70 | 140 |
37 | Self-tapping screws 0.35 universal | 2 | 130 | 260 |
38 | Self-tapping screws 0.65 for wood | 1 | 130 | 130 |
39 | Self-tapping screws 0.75 for wood | 1 | 130 | 130 |
40 | Self-tapping screws 0.25 universal | 2 | 130 | 260 |
41 | Painting corner galvanized | 18 | 35 | 630 |
42 | Alabaster in bags | 1 | 280 | 280 |
43 | Silicone in tube | 1 | 140 | 140 |
44 | Glue in a tube "FixAll" | 1 | 420 | 420 |
45 | Crosses 1.5 for tile joints | 4 | 100 | 400 |
46 | Wedges for tile joints | 2 | 100 | 200 |
47 | Cable NUM 3/1.5 "Sevkabel" | 100 | 35 | 3500 |
48 | Cable NUM 3/2.5 "Sevkabel" | 150 | 47 | 7050 |
49 | Cable NUM 3/4 "Sevkabel" | 36 | 82 | 2952 |
50 | Cable NUM 3/6 "Sevkabel" | 5 | 95 | 475 |
51 | Corrugation 16 | 100 | 3 | 300 |
52 | Corrugation 20 | 200 | 4 | 800 |
53 | Internet cable "FTP" | 10 | 22 | 220 |
54 | TV cable "SAT 703" | 40 | 25 | 1000 |
55 | Telephone cable "KSPV" | 10 | 12 | 120 |
56 | Crab TV 1/3 | 1 | 250 | 250 |
57 | Insulating tape | 1 | 40 | 40 |
58 | Punched tape | 1 | 180 | 180 |
59 | Lamp 150v | 5 | 40 | 200 |
60 | Socket boxes for concrete | 50 | 10 | 500 |
61 | Automatic 10 amp. "ABB" | 2 | 150 | 300 |
62 | Automatic 16 amp. "ABB" | 3 | 150 | 450 |
63 | Automatic 25 amp. "ABB" | 5 | 150 | 750 |
64 | RCD "ABB" | 1 | 1250 | 1250 |
65 | DIF automatic 25 amp. | 1 | 1350 | 1350 |
66 | Armature 12 | 3 | 220 | 660 |
67 | ||||
68 | Lifting material "in tons" | 8 | 1500 | 12000 |
69 | Delivery of materials "gazelle" | 4 | 1500 | 6000 |
70 | Total: | 147 787 |
An estimate for repairs is a cost calculation construction work and materials. Estimates are prepared both for construction and finishing work of premises (buildings) and for individual types of work. According to the estimate documentation, funds are allocated for construction and renovation work. We will tell you how to create an estimate for repairs in our consultation.
Repair estimate
The estimate is a mandatory appendix to the contract for construction and finishing work. An estimate for repair work is drawn up so that the parties to the contract have a clear idea of the amount of costs, as well as what kind of work needs to be done, in what time frame and by which specialized organizations. In addition, the presence of an estimate helps the customer control the volume and quality of work performed, technological processes, as well as rising prices estimated cost.
As a rule, an estimate for repairs is drawn up design organization or a construction company independently. The estimate is drawn up based on spending standards building materials, taking into account the market cost of materials and work.
The objects of construction and repair can be buildings, structures, private houses, apartments or separate rooms. Next, we will tell you how to make an estimate for the renovation of a room, a sample of which will be given below.
Estimate for room renovation
The estimate for the renovation of the premises is drawn up in free form, according to a developed and approved template, each organization independently (Information of the Ministry of Finance of Russia N PZ-10/2012).
The estimate for repairs must contain the mandatory details provided for in paragraph 2 of Art. 9 of the Law of December 6, 2011 N 402-FZ:
- name and date of preparation of the document;
- names of the parties who entered into an agreement for repair work;
- position, full name and signature of representatives of the parties to the contract authorized to approve the estimate;
- name of materials and work, unit of measurement, quantitative expression, price per unit and total cost.
For convenience, the estimate can be divided into stages (for example, depending on the type of work - dismantling, network wiring, finishing).
We will send the material to you by e-mail
Long-awaited renovation in the apartment! In order for you not to hate it in a couple of years, you need to prepare for it. An example of an estimate for the renovation of a room will help with this, because such data will show how much and in what volumes you need to invest to get the home of your dreams. This is not just a list of purchases, but a whole document that can be entrusted to specialists, but be prepared for inflated costs. You can just as successfully compose it yourself, it’s just important to know how.
The estimate includes all expenses, calculates any unforeseen costs, including the services of specialists different directions. In order to make an estimate, you need:
- Take measurements of the room. This includes the height and length of all walls, the length of wiring, cables, water supply and thermal communications, if any are included in the repair. After receiving information on dimensions, you can, which will become the basis for calculating the necessary roughing and finishing materials. It is important to have data on the area of walls, floors and ceilings.
- Based on the data obtained, it is necessary to calculate rough materials - make a reserve of at least 5-10% in this case.
- Next comes the selection and calculation of the necessary decorative materials.
- Now comes the most interesting and exciting part: price monitoring. You need to know how much draft and Decoration Materials, the cost of services of a designer and a team of repairmen, plumbers, electricians and other specialists who may be involved in the repair process. It is best to draw out a table and indicate several options for each item - this will allow you to avoid making a mistake with your choice.
All received data must be recorded and then compiled into one table: this way you will have a work plan + the cost of materials and the cost of paying specialists. It is also necessary to indicate the timing of the work, and if the injection of funds is partial, then their dates of such receipts.
Nuances
The estimate is not only Technical information, it includes an element of creativity. Technical aspect- this is at least minimal knowledge of the processes that will occur during the repair, an understanding of the building materials market, what is needed for what.
Creativity– this is the competent distribution of all cost items in accordance with the needs at a particular stage of work. It is important to take a balanced approach to choosing a team if you trust this to specialists. Don't flatter yourself low prices– it’s likely that the quality there will be the same. It’s better to make an estimate yourself; minimal data and numerous templates will help you with this. Why is it better to do it yourself? Everything is very simple: when ordering an estimate from a construction company, you will probably end up with a 20 or even 30% larger amount than it actually is. If you doubt the truth of the data, then you can very well use the services of another “specialists” - these are auditors. As practice shows, the cost of the estimate will decrease by no less than 10%.
Examples
The photo below is an example of an estimate for a kitchen renovation. All types of work are arranged into categories for convenience. These types of estimates for room renovations will help you navigate and quickly figure out how much money will be spent on individual parts.
There are separate subsections dismantling work. When carrying out a major overhaul, there will be a need to dismantle not only the old finishing, but also pipes, including sewer pipes. And given that the apartment has plumbing, this work will also affect the bathroom. It is rational to carry out renovations in the bathroom/toilet and kitchen together: this way you can save money. Next comes the treatment of the walls, floor and ceiling. Here you can see that roughing and finishing work are included in one table; we would recommend separating them.
Also important stage When drawing up estimates, the installation of plumbing fixtures is not included. If it is better for specialists to finish welding the riser, since you have decided to use their labor, then it is quite possible to connect the mixer yourself; no serious skills or complex tools are needed for this.
As you can see, there are columns with units of measurement, areas and lengths of all work items. For ease of calculation, the price per unit of work and then the total cost are indicated. The estimate will extract more funds if you instruct construction company purchase of materials. But be careful here: replacement is often practiced quality materials and components for low-grade ones. Therefore, it is important to control every stage of the work.
The following is presented approximate estimate for the renovation of the entire apartment, there is a slightly different drawing up scheme, but the meaning is the same. That is, unit prices and the total cost of work are indicated. As we can see, here the customer will most likely entrust the company with the purchase of materials; a special column is allocated for this, although it is possible that he will purchase it himself and enter this data for clarity. Here's a more thorough look. Pay attention to the last point: the customer even took into account the cost of removing construction waste, which is also important when carrying out major repairs.
Example of an estimate for apartment renovation
This page presents some examples of estimates for construction and repair work.
This examples construction estimates
for work already completed (once upon a time, by someone) or abstract estimates on standard roof repair, premises renovation, office renovation etc.
All the estimates presented here have one thing in common: all of them were compiled in the Estimate 2007 program.
The estimates given here will clearly show you what it looks like estimate created in the Estimate 2007 program.
The presented files may also contain others that ours can create: KS-2, KS-3, Invoice, Contract Agreement, etc.
For convenience, the list of estimates is divided into groups and each estimate is provided brief description.
Click on the title to download the estimate.
The estimate includes a calculation of the cost of work and materials for the repair of a section of metal roofing. public building(Not a private house). The following work is carried out according to the estimate: complete replacement metal roofing on the roof section with preliminary repair of the sheathing and processing wooden elements fire-retardant composition. The area of the roof section being repaired is 730 m2.
Estimate for major repairs soft roof technical floor. Roof area 1,300 m2. The estimate includes a calculation of implementation next works: dismantling the old roofing carpet with garbage removal, dismantling inactive ventilation pipes, installing a new sand concrete screed, priming and installing a new two-layer roofing carpet made of "Uniflex" on fiberglass.
Very revealing office renovation estimate- 500 lines, 11 sections: general construction and finishing works, ventilation and air conditioning, water supply and sewerage, structured cable systems, access control system and other works.