Application of MDF panels. MDF panels, application, choosing the right MDF panels, installation and fastening methods, useful tips Making an MDF panel

Evgeniy Sedov

When hands grow out the right place, life is more fun :)

Content

You can make repairs in any room using special coatings yourself. The choice of covering depends on design solution, features of the room. Today, MDF panels for wall cladding are considered the easiest to install and at the same time aesthetically pleasing material, which compare favorably with PVC and chipboard products.

What are MDF panels

A very common wood material used for cladding is MDF panels for walls. It is made from natural, steam-treated fibers. Its usual name is fiberboard, but Medium Density Fiberboard is an improved version of it. New technologies are used in production, so the result is a more modern product with new properties. Its advantages include:

• environmental friendliness;
• aesthetics;
• strength;
• durability.

The new fibrous material is used for the production of furniture, flooring, and ceilings. The environmental friendliness of medium-density wood fiber products is due to the fact that safe resins and plant lignin are used in production to bind fibers during dry pressing of wood fibers instead toxic formaldehyde. Finished products can be additionally coated with varnishes, waterproof and fire-resistant mixtures.

What types of MDF wall panels are there?

Depending on the application, MDF wall panels have different thickness, design and protective coatings. Most often, such products are used for interior work, cladding door designs. For different rooms with different humidity and temperature, use cladding with special protective coatings, filling. To choose the right cladding, you need to know about the features of production and use of each type fibrous material.

Solid pressed sheet

Solid pressed products - sheets with medium density, which are often used in cladding work office premises. Whole-pressed sheets are strips of fibrous material, smooth on both sides, that are attached to the frame using special clips (the main method). Sometimes glue is used for installation, but only in cases where the wall in the room is smooth and has no defects.

Laminated

The material differs from solid-pressed material by being treated with a special decorative varnish without color, which provides greater moisture resistance, durability and better aesthetic properties. However, even laminated sheathing is not intended for use in wet areas or with prolonged contact with moisture. Laminated MDF is also used for cladding and doorways.

Moisture resistant

The resistance to non-standard environments of the bathroom, shower, and kitchen of this type of product is due to its increased strength. Moisture-resistant cladding is the most durable. In addition to moisture-proof properties, the sheets are soundproof and heat-retaining. The coating, often acrylic, is not destroyed by water, so moisture-resistant products can be used when decorating kitchens and bathrooms.

What are the advantages and disadvantages of MDF wall panels?

Medium density fiberboard is chosen because this material easy to install even with your own hands (without a specialist), does not require pre-treatment surfaces. All that is needed is a fastening in the form of a frame on which the sheets are placed. Installation is simple and you can do it yourself. Correct calculation of the size and number of stripes is half the success. The main advantages of the material also include durability and cost-effectiveness. MDF panels for wall decoration have a number of disadvantages:

1. The main disadvantage of fiber boards is the fear of moisture. The presence of a water-repellent coating does not mean that they are intended to come into contact with water.
2. The thickness of MDF is less than a centimeter, and its strength is less than that of drywall.
3. Appearance - this type cladding is intended mainly for work areas, it is rarely used at home, more often for offices, and special water-repellent sheets on a fiber basis are used for kitchens and baths.
4. Minimum Fire safety– fiber boards are highly flammable.

How to choose MDF panels for the kitchen and other rooms

Manufacturers of wall cladding, for example, such as Kronostar, Omis, Rico, have a wide range of products with different designs. Release material under white brick, ash, wenge, wood chips and other designs. For example, Kronostar produces fiber sheets different coatings, wood or tile surface, for covering the ceiling and walls of different rooms.

Before making a choice, you need to familiarize yourself with the range of medium-density fiberboards. They are produced with the following types of coatings:

• paper;
• lamination;
• veneered;
• special water-repellent.

Depending on the type and interior of the room, its humidity and lighting, the type of finishing is chosen. For example, cladding with a special water-repellent coating is suitable for bathrooms; the same sheets can be installed in the kitchen. Glossy lining is more often used for office spaces, corridors and living rooms, as it has greater density and better aesthetic properties.

Where to buy and how much do wall panels cost?

You can purchase slabs at any hardware store or order them by studying catalogs on specialized websites on the Internet. Often, when selling, they provide related services: they measure and cut the material to suit your order. The price of fiber boards is not the highest, ranging from 120 rubles. for 4 m2 up to 1000 rubles and more for the same area. The cost depends on the manufacturer of the material, special coating and decor.

Installation of wall panels

How to attach MDF panels to the wall? Fiberboards are mounted on a frame, usually wooden. The beams of the structure are located at a distance of 40-50 cm. It is important that the sheathing is attached evenly, otherwise the cladding may become wavy. To install the frame correctly, you need to periodically check the structure with a level. Installation of MDF panels is carried out in the following sequence:

1. After processing the walls, the frame or sheathing is installed.
2. The plates themselves are attached, starting from the corner of the room, using self-tapping screws.
3. The first sheet is mounted from the corner, the rest are attached using special staples, which fasten the material together.
4. Each next strip fits onto the bracket and joins the previous one. It is important to connect them tightly at the joints so that the facing of the room has an even appearance. If necessary, the sheets are cut to the required size.
5. Installation is carried out at a certain distance from the floor. Leave space for the baseboard. Corners are processed using a flexible corner. All components for installation can be purchased from the same manufacturer.

Video: Wall decoration with MDF panels

As an alternative to natural wood, so-called tile wood materials, which have a whole range of consumer properties, are often used in construction, decoration and production of furniture and other goods. One of the most common is MDF board material, the basis of which is dried wood fibers, compressed into a carpet under the influence of high temperature and synthetic binders. chemical substances. Lignin released when wood is heated provides reliable connection fibers, thanks to which MDF boards acquire special strength and reliability.

The similarity between MDF and fiberboard, which experts often talk about, is due to some similarity in their production methods. The dry method of manufacturing fiberboard boards has become the basis of the production cycle for MDF materials. It relies not on the use of special adhesives, but on the action of the binders that make up the wood fibers. At the same time, there is no need for prolonged pressing, since the individual components of the slab are firmly attached to each other due to the interfiber connection.

Speaking about the popularity of MDF in the world, it should be noted that it was a consequence of the affordable cost of the material, 60% lower than the cost natural wood, as well as its qualities, which are in many ways similar to the properties of natural wood, which is more expensive. All this allows us to say that MDF board is an ideal solution for the manufacture of economy class furniture, inexpensive but high-quality home renovation, and other work that requires increased requirements quality, with the simultaneous need to ensure low cost of the result.

The main consumer properties that MDF boards demonstrate are:

High strength, allowing you to securely fasten furniture fittings;

Practicality and durability of the material, making MDF panel ideal solution For repair work or manufacturing of interior items;

High quality of the surface of the slab, achieved through careful processing, grinding, as well as strict control at all production stages;

High moisture resistance, low hygroscopicity, lack of tendency to corrosion, allowing the manufacture of furniture for kitchens and bathrooms from MDF boards;

A high level of manufacturability, thanks to which furniture can be made from MDF according to any design project, regardless of its complexity, obtaining an ideal result, characterized by aesthetics, convenience and safety in use;

Environmentally friendly, completely safe for human health, due to the absence of harmful MDF boards chemical compounds, the evaporation of which can cause harm environment and residents of the house;

Versatility in use, the ability to apply decors to the surface of the material, giving finished product aesthetic and original appearance;

High level of sound insulation, thanks to which MDF wall panels provide comfortable conditions living in a house or working in an office;

The ability to ensure the ideal hygienic condition of furniture, which is especially important for kitchen and children's room interior items.

As for the main areas of application of MDF, this material is most in demand for:

Enterprises engaged in the production of furniture;

Companies operating in the automotive industry;

Construction enterprises;

Business entities involved in the manufacture of various types of containers, etc.

In order to simplify the choice of tile materials, customers purchasing MDF are offered the following types slabs:

Solid pressed MDF boards: they have a medium density compared to other types of material and are made smooth on both sides. Production method: hot pressing wood pulp, mixed with a binder - lignin, released from the fibers, under prolonged thermal exposure. Affordable cost, aesthetics and ease of processing have made solid pressed MDF boards a popular material for production. inexpensive types furniture.

Among the advantages of solid-pressed boards, it is necessary to highlight environmental friendliness, high insulating qualities, hygiene, ease of care and maintenance of appearance, decorativeness and readiness for use in furniture production. Important distinguishing property solid pressed boards - increased moisture resistance, which makes them an ideal solution for the production of interior items for furnishing rooms with high humidity air.

Laminated MDF boards are almost identical in production method to solid pressed boards. Their main difference is the lamination process that this material goes through on one of final stages production cycle. Usage transparent film allows you to preserve and convey the natural beauty of wood to the product, while color lamination makes it possible to produce panels in a wide color range, which is very important for furniture production. Among the main advantages of laminated MDF boards, it is necessary to mention such qualities as aesthetics, ease of processing, the possibility of milling, admissibility additional processing surface with varnish in order to protect it from negative external influence. In addition, laminated MDF boards demonstrate abrasion resistance, light and heat resistance, chemical and climate resistance, dirt resistance, and hygiene.

Speaking about the scope of application of laminated boards, it is necessary to name furniture manufacturing, production of wall partitions, advertising and exhibition structures.

Moisture-resistant MDF boards are included in a special product group due to the increased density of the material, as well as its ability to be easily transported high humidity air, without deforming or collapsing under the influence of dampness. For moisture-resistant boards, high-quality wood is used, the fibers of which are firmly connected during prolonged exposure to temperature, without the need for additional use of chemicals. The advantages of moisture-resistant MDF boards are high sound insulation, strength, ease of installation. machining, pronounced aesthetic properties.

It’s not difficult to purchase MDF boards - a lot manufacturing companies Today we are ready to provide wholesale supplies of this material to furniture production or to the warehouse of enterprises working in the field of construction and finishing of residential or commercial buildings, as well as those engaged in the production of advertising structures. By choosing a reliable supplier who guarantees high level quality of the supplied products, the business entity will be able to confidently develop production, guaranteeing its customers an exceptional level of service, as well as the presence of all the necessary consumer and external properties in the manufactured products.

Among the variety of finishing materials offered to consumers today, we can separately highlight MDF panels used as decorative coating for walls or ceilings.

In their design they are similar to plastic panels, but unlike it they are made of natural wood materials and have warmer and more natural wood tones, as well as being more pleasant to the touch.

Of course, someone can say that this is just an imitation of wood and they would be right, but if you consider that the panels are made from waste obtained from processing solid wood, then we can conclude that, according to its characteristics, MDF no different from wood.

The abbreviation MDF itself came from in English and means the same as chipboard - chipboard, but at the same time, this material compares favorably with its Soviet analogue in its environmental friendliness, as a binding component here No harmful resins or phenol are used, only paraffin or lignin.

The composition of the panel is wood dust obtained from sawdust; after grinding, the raw materials are dried and heat-treated in ovens; when heated, the same lignin is released, which glues the powdery mass together, and also pressing gives greater strength. The cooled products can be processed, cut and covered with melamine film imitating wood patterns.

Since the structure of the panel is something between plywood and cardboard, it very easy to work, for cutting use a regular hacksaw. The panels have good thermal conductivity, but they also have a drawback - the melamine film is easily damaged, stains and scratches remain on it, however, this can be easily corrected with paint.

Exists a large number of MDF panels of various designs and sizes, all of them are made using the same technology, but the main difference is exterior decoration, which is subdivided into three groups:

• Veneered panels– natural wood veneer, usually from commonly used wood species, is used here as the top decorative layer. The product has a similar appearance solid wood, looks expensive and natural, but at the same time has a more favorable price;
• Laminated panels- these are the most common types of MDF panels. The simplest option is gluing with melanin film, which is often used for wall cladding. A large number of patterns, and not only with imitation wood, makes this type of panels the most profitable. If a high-gloss film is used for lamination, the surface acquires exclusivity and respectability;
• Painted panels– as is already clear from the name, here as decorative covering paint is used, and the panels themselves can have any shade, and in most cases do not imitate wood.

Which of these varieties should you choose? All depends on the type of room where installation is planned. Panels with a laminated coating best withstand moisture, while MDF with veneer is the most scratch-resistant, but also the most expensive.

Wall cladding with MDF panels is best option for any room except the bathroom, this material is devoid of the cold and unnatural shine inherent in plastic, and big choice sizes and designs will allow you to make beautiful and high-quality repairs even with a limited budget.

Panel size depends on the manufacturer, well, before installation, the buyer needs to determine what kind of design he wants to get in the end:

• Standard panel length MDF 2600 mm, a little less often you can find products with lengths of 2400 and 2700 mm. For installation, this does not matter at all, because, as a rule, sawing is carried out in the shop;
• Panel width from 150 mm to 900 mm, less commonly you can find panels with a width of 1200 mm. It is this parameter that has a great influence on the final aesthetic effect, since the wider the panel, the brighter and more emphasized the texture, and the large number of vertical seams does not catch the eye;
• Panel thickness depending on the manufacturer and the chosen model, it can range from 3 mm to 30 mm, and if it is a panel with veneer, it can reach up to 60 mm. Thus, you can always choose the optimal panel option for any type of room - large or small.

When choosing should be kept in mind that the thinnest panels, which are also the most fragile, should essentially only perform a decorative function. Products from 12 millimeters or more, in addition to decoration, can also be used as good insulation, after all, in their own way thermal insulation properties they are comparable to brickwork, 15 cm thick.

Also watch a video with useful information about MDF panels

Get attractive design walls, provide comfort in the room and an environmentally friendly environment in it, possibly with the help of modern finishing material- MDF. It is produced in the form of panels. It gained fame extremely quickly due to its practicality and attractiveness; its use is allowed in rooms with extreme loads: kitchen, living room, hallway. MDF panels surprise with their variety of shades and textures; they can very accurately imitate natural wood materials, brickwork or tile. The cost of the material is low; if you install it yourself, you can get significant savings on finishing works, during operation it will not require particularly complex care.

MDF wall panels, their properties and advantages

To begin with, we note that MDF panels are produced not from solid wood, but from waste, and no synthetic additives or glue are used; the technological process consists of heating wood chips to high temperatures and pressing it under high pressure. The strong connection of material fragments occurs due to the natural polymer compound released during heating - lignin.

Among the important advantages of MDF panels it should be noted:

• environmental friendliness of the material,
• Possibility of quick and easy installation,
• good thermal insulation and noise insulation characteristics,
• material strength, long service life,
• ease of replacing any piece of finishing if necessary,
• simple care that does not require the purchase of expensive household chemicals,
• the ability to hide wires, pipes, etc. under a layer of cladding engineering Communication,
• affordable cost of material.

The main disadvantages of the panels are:

• flammability of the material - when laying electrical cables under the slabs, they will need to be carefully insulated in a self-extinguishing corrugation,
• inability to use in conditions of high humidity,
• fragility, the need for very careful handling when performing installation work.

Types of MDF panels

In the manufacture of panels we use different methods finishing of the front side, respectively, the panels themselves are divided into two types:

• laminated, the surface of which is covered with PVC film, characterized by an attractive appearance, imitating the structure of natural wood, others building materials, not prone to dust accumulation, resistant to damage;
• veneered, for finishing of which veneer of the best wood species is used.

The external finish of the panels can be shiny - glossy, or matte.

We purchase MDF panels and materials that will be required during installation work

Although installing MDF panels is not a complicated process, it will nevertheless require preliminary preparation, the purchase of the facing material itself and the necessary components. To correctly calculate the number of panels, you should first take into account the width of the space to be finished. MDF panels have the following dimensions: their standard width is 148, 190, 240 mm. Determining the required number of panels is simple: it will be the quotient of dividing the width of the wall by the width of the panel. You should purchase a little more material than was received by calculation: there may be defects, some of it will be used for scraps, and losses may also occur as a result of errors.

For work you will need to stock:

• MDF panels,
• insulating corrugation, if electrical wiring will be laid under the panels,
• screws,
• ceiling lamps,
• pendants,
• claymer,
• profiles.

Preparing the walls will consist of cleaning them from remnants of old wallpaper. You will also have to remove the baseboards. The surface of the walls must be treated with an antifungal primer, especially for rooms with high air humidity. If necessary, the walls can be covered with insulating material, for example, foam foil A. It is attached with glue, end-to-end, with the foil side facing the room.

The use of finishing corners will greatly simplify installation. Consisting of strips located with a gap of 2 mm, they are intended for fastening strips; a film corresponding to the color of the panels is applied to their surface. The formed angle very easily bends outward or inward. This point is especially important if the geometry of the existing corners is far from ideal.

To build a frame for the cladding you will need slats, preferably 20x40 mm. There is no point in using slats with a large cross-section - the panels are light in weight. In addition, slats with this cross-section are constantly available for sale in construction stores. Fastening the slats can be done using plastic dowels and wood screws.

To fasten MDF panels to the frame bars, you will need clamps; most often they are sold complete with the panels. It will be convenient to glue the corners liquid nails. We should especially talk about the quality of the glue - since the panels can change under the influence of moisture and temperature, the glue for them must have some plasticity. Such characteristics of the glue are usually indicated on its packaging. In addition, the adhesive must have a texture that allows it to be applied thicker or very thin layer- depending on the curvatures present on the walls. Liquid nails meet these requirements.

Installation of the sheathing should be carried out by checking the evenness of the structure, for which you can use a regular building level.

Before attaching MDF panels, you should definitely make sure the quality of the installation of the sheathing - this will ultimately determine general form walls To fasten the panels to the sheathing, clamps are used.

Those who decide to decorate MDF panels with their own hands should not neglect the following recommendations:

1. If you need to cut panels, it is best to use a jigsaw - the cut will be smooth and clear. Here it should be remembered that milling, sanding and drilling panels is quite simple to perform; the tools used are the same ones that are used when processing wood materials.
2. In rooms with increased level humidity, it is better to make the frame from metal profile. If the sheathing is made of wood, then it should be treated with high-quality antifungal impregnations.
3. If you plan to finish the junction of the ceiling and walls with plinths, then before installing the panels around the perimeter of the room, install a fastening device. After installing the slabs, a ceiling plinth is installed in its groove.
4. In places where hanging interior items are supposed to be placed, the frame will need to be reinforced with additional bars.

Finishing with MDF panels - work order

Installation of the sheathing begins from the most convex place on the wall. The bars are mounted in a horizontal direction, with a step of no more than 40 cm. Increasing the step can lead to distortion of the pattern.

You should start attaching the planks from the corner; it is advisable to make the calculation in such a way that last panel remained intact. Before starting installation work, you can repeat the calculations or even try on how the purchased material will fit on the wall. The tenon of the first panel should be in the corner.

Along the length of each panel you will need to use 5-6 fastening clamps. They are distributed evenly and secured to the slats using a screwdriver. The opposite end is fixed using self-tapping screws.

In order for the screw head to sink into the material, you must first drill a hole with a diameter of 8-10 mm in the strip. The next plank is fastened with a tenon into the groove of the previous one; this procedure is repeated until the last one is installed. Each of the joints at the joints, side and top edges are secured with corners using liquid nails.

If you choose the option of laying panels in a horizontal or diagonal direction, then you should change the direction of the sheathing - its strips should be located perpendicular to the panels of the facing material.

All significant depressions found on the walls should be filled with blocks or wedges.

From below, the joints of the slabs are covered with a regular plinth; it can be secured with nails or sealed with sealant. To make it easier to attach the plinth, the bottom batten of the sheathing is fixed at floor level. The joint under the ceiling can be made with a corner or plinth.

Methods of fastening MDF boards

Methods of fastening MDF boards may be different, depending on the condition of the concrete surface on which installation is being carried out. If it is leveled and clean, then the panels can be glued directly to the wall using adhesive sealant.

It is applied in a zigzag over the entire board, then it is pressed firmly against the wall for a couple of seconds. If excess glue comes out, carefully remove it with a spatula.

If under MDF boards a layer of insulation will be laid or numerous utility lines will have to be hidden under it, then the best option The slabs will be installed on a metal frame.

If you need to hide noticeable wall irregularities, it is better to use a lathing made of wooden beams- it will be stronger and more stable. In places where sockets or switches are installed, holes of the required diameter should be made using an electric drill.

MDF panels for the kitchen - are they a suitable material?

You can often find discussions about installing MDF panels in the kitchen. It is not easy to give a definite answer to this. MDF is an environmentally friendly material, it does not have unpleasant odor, therefore cannot cause any harm to people in the kitchen.

At the same time, the material is not moisture resistant to the extent that would allow its unhindered installation in rooms with high levels of humidity - under the influence of water the material may lose its attractive appearance. But it is still possible to improve areas remote from places where water is used, for example the dining area, using MDF boards. At the same time, it is recommended to mount the panels on a metal profile - wood in a humid environment can suffer from fungi and putrefactive processes. In addition, experts recommend paying attention to relatively new option panels with a special moisture-resistant coating.

Care of MDF boards

The period of operation of the slabs will not cause much trouble. The surface of the slabs is very smooth, it is well laminated and covered with paints. Cleaning the material from contaminants is done with a moistened soft cloth; when cleaning, do not use substances containing abrasive particles.

If during operation peeling of the top coating of the film becomes noticeable, it can be removed using a fine-grained sandpaper. Any of the damaged slabs can be replaced quite easily with a new one.

Most people are accustomed to the fact that MDF panels are an attribute of decoration for various office premises. And all because they are familiar with almost one of their varieties - lining - slatted panels.

Moreover, not so much with the appearance of the panels themselves, as with the way they are laid: vertically or horizontally, less often - at an angle. Such MDF panels often do not differ in the variety of textures: they are mainly imitation of different types of wood. And this is unlikely to be appropriate in most living rooms or bedrooms. Therefore, in our houses and apartments, MDF panels are either used extremely rarely, or are used in hallways and on stairs.

Meanwhile, such discrimination most likely occurs from a lack of information or imagination and design abilities among potential consumers. The video we bring to your attention can radically change the situation.

Application options for MDF panels

Non-trivial approaches to the use of the mentioned slatted MDF panels, plus the use of other forms of this material, can radically change both your attitude towards it and the interior of your home.

What is an MDF wall panel, and what types does it come in?

We will not describe the material itself much, and we are doing this generally for those who were inspired by the video at the beginning of the article to become more familiar with the material. MDF is wood dust (waste from the woodworking industry) compressed under high pressure. Absolutely used as a binder harmless materials, most often wax. This distinguishes the MDF panel from chipboard, OSB, laminate and other products similar in scope, in the manufacture of which phenol-containing adhesive compositions are used.

In appearance, and in the way MDF production resembles chipboard (chipboard), but has a higher density. Of course, without a decorative coating, this material is unattractive. It is in the types of coatings that the main difference between MDF panels lies. The cheapest varieties have a paper coating with a pattern applied to it, the more expensive ones are covered with wood veneer of various types of wood or laminated, coated with various kinds of polymer compounds, etc.

Slat panels, as a rule, have locks along both sides for mutual joining. Some types of panels are also equipped with a locking part at the ends - for merging panels along the length, but this is rather exclusive.

MDF panels are also produced in the form of square or rectangular tiles. When laid, they resemble tiles.

They look impressive with a successful combination of colors or decorative design seams. As a rule, such tiles have a decent thickness. It is the combination of thicknesses, along with color, that will help create a certain 3D effect, which is especially fashionable now.

MDF panels for walls are also available in the form of thin sheet coverings large sizes, resembling laminated fiberboard, but often having a texture that provides complete visual, and sometimes tactile, imitation natural materials, used in the construction or decoration of walls.

In general, MDF is such a malleable material in terms of texture formation that when using it, you can imitate almost any shape - just remember furniture MDF facades. Paradoxically, they can also be used in wall decoration, imitating their cladding with expensive type-setting wood panels valuable species. Moreover, it is now construction market a great variety of 3D MDF panels are presented.

Sometimes, even watching various options decoration of premises for various purposes, you would not realize that these unusual and beautiful things are made of MDF.

Recently, entire interior elements with special, initially specified characteristics have begun to be made from MDF. For example, such as kitchen aprons. It is clear that these coatings are used under special conditions:

• high humidity;
• fat deposits;
• difficult temperature conditions;
• usage of various compositions chemically active cleaning agents;
• impact resistance;
• UV resistance, etc.

And this is far from full list conditions that such a specific MDF panel must meet. But modern polymer materials make it easy to implement these requirements.

Installing an MDF apron

It is also worth registering sheet MDF with imitation in a separate line tiles. It is clear that such panels have water-repellent properties so that they can be installed in places where natural tiles are usually laid - in kitchens, bathrooms, toilets, etc.

With all this, MDF panel is a relatively inexpensive material, in any case, much cheaper than those coatings that it imitates so successfully that sometimes even a very picky viewer will not notice the difference.

Installation of MDF panels and use of accessories

There are a great many varieties of MDF panels, and there are also a lot of ways to install them on the wall. Let’s begin our consideration and analysis with the most traditional one – laying over wooden (or metal) sheathing.

This method is more often used when the walls are very uneven or the room needs to be soundproofed. Most of the so-called finishers who do not delve into the physical features of the proposed type of work, in the desire for easy additional income, loudly declare the simultaneous insulation of walls with this installation method, but we want to warn you against this rash step. It is possible to lay heat-soundproofing materials under MDF panels only on interior walls. By insulating the exterior from the inside, you move the dew point inside the room, which often leads to moisture condensation on inner surface walls, with everything that flows from here, negative consequences both for the wall itself, and for the same MDF panels (if they are not moisture resistant), and for the insulation, and for your health in the end.

As for the installation itself on the lathing, it is important to follow a few simple rules:

• use slats with a cross section of at least 20? 40, and metal profiles of appropriate configurations and metal thickness;
• level them;
• make the distance between the longitudinal slats no more than 450 mm, and for non-slatted MDF panels - according to their sizes;
• ensure that the sheathing is securely fastened to the wall;
• use reliable methods of fastening the panels to the sheathing - preferably using clamps.

Despite the versatility of MDF corners that come with MDF slatted systems, we recommend using plastic ones, which are attached to the same liquid nails. Remember that the “native” corners are the most vulnerable element of the entire MDF slatted system in terms of damage.

Review of MDF panels and corners

Interesting for MDF installation panels will use plastic guides quick installation for PVC panels.

You can also use accessories from plastic wall panels appropriate thicknesses and colors or special aluminum profiles.

The use of such accessories will be especially interesting when decorating walls with MDF tiles.

The abundance of colors and textures produced today plastic skirting boards, also allows you to simply and tastefully decorate walls made of MDF panels. The use of wooden accessories in the design of joints between planes of MDF panels is also quite interesting.

We don’t see any particular need to separately describe the process of installing ceilings from MDF panels - it is no different from installing these panels on walls using lathing.

Tip: MDF panels are coated with paper; after installation, they can be painted with some colorless polymer varnish. This will radically increase their service life, because even a mark from a marker can be wiped off with a damp cloth from such a coating. Also, after this treatment, the coating becomes washable.

We would still recommend gluing MDF systems to smooth walls. Modern adhesives make this process simple and even fun. We will show how this happens using the example of a video about polyurethane foam balloon adhesive Penosil. It must be said that the majority famous manufacturers polyurethane polyurethane foam have similar adhesives. They differ from ordinary foam in the absence of secondary expansion, which makes them convenient to use for such purposes.

Pasting MDF walls panels

In addition, no one has canceled the use of any other adhesives intended for the corresponding surfaces. There are also special compounds for MDF. The choice of one glue or another depends, among other things, on your habits and preferences in working with various tools.

It must be said that installing MDF panels with glue is practically the only way to create complex combined interiors, coverings that fit tightly to the wall, or install large-sized MDF products without the use of through fasteners.

You can combine these two types of installation and get voluminous finishing options, which always enlivens the interior. Before gluing the panels directly to the walls, they must be dust-free and primed with a deep penetration primer.

The sufficient flexibility of MDF panels allows them to bend around rounded walls, form arcs of arches, etc.

If you have uneven walls, but you still don’t want to make lathing for installing MDF panels, and even more so to level the wall with continuous plastering, then there is an option to install protruding beacons made of gypsum or cement mortars. After drying, you can apply glue like “liquid nails” or any glue, incl. from polyurethane balloon adhesives. Further – it’s clear.

Quick finishing of a bathroom with panels

It is better to apply the glue continuously, but it can be applied in spots with a step of no more than 200 x 200 mm. The method of forming corners and junctions using sealant shown in the video is, in our opinion, the most interesting. You can read in detail about the properties of such sealants in

Also, we cannot fail to mention another important point related to giving exclusivity and individuality to your interior - painting MDF panels. Of course, 3D MDF panels are best suited for this.

Painting 3D MDF panels

Applying paint with a spray gun at different angles will significantly enhance the 3D effect. And there are plenty of options for your individual creativity. Chips, glitters, flocks, various fluorescent paints are just a small list of what you can use. In addition, such coating with appropriate compounds can turn an ordinary panel into a moisture-resistant one, with the possibility of using it even in bathrooms. And the absence of a compressor is not a problem if you are a regular reader of our site.

Conclusion

MDF wall panels today are one of the most convenient materials to use, allowing you to make your home or apartment an example of design art at low financial and labor costs. And the most important thing is that you can work with it without the involvement of finishing specialists.

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)