Making slime. How to make slime at home. We make slime from scrap materials. Soap flake slime

Lizun is a kind of chewing gum for hands (hand gum), which is now experiencing the second peak of its popularity. This toy has the ability to take any shape, it can be twisted and crushed, tossed and deformed, glued to different surfaces and peel them off without any effort, you can even glue some parts together (only for a short while) with its help.

Slime has the consistency of jelly, but it is not able to melt. The toy helps in development fine motor skills, relieving stress and calming the nervous system as a whole.

You can buy handgams at a toy store at appearance all models are almost the same. However, their quality can vary quite a bit. Often, cheap Chinese slimes are made from low-quality, and sometimes outright harmful substances. That is why parents who care about the safety of their children most often create such toys themselves. Moreover, the ingredients necessary for this can be found in every home.

How to make slime from liquid silicate glue

Silicate glue is a common material from which most handgams are made. Make slime with my own hands you can do this:

• mix in a separate container one part of glue (silicate or office glue, for example, PVA) and one part of medical alcohol;
• add a little to this consistency coloring matter(food colorings that are absolutely safe for children’s hands are suitable for this purpose);
• after all the ingredients are mixed, you need to keep this mixture under running water ice water, waiting for the slime to harden.

This method of creating sticky toys does not require high costs materials and time, but it is used quite rarely, due to the fact that the recipe uses alcohol.

How to make “glass” or transparent slime

You can create a glass slime that is absolutely transparent without much effort. To do this, you need to prepare sodium tetraborate (the well-known borax) and ordinary liquid transparent glue (silicate).

The process of creating a transparent handgam looks like this:

• in a glass container, mix one part of glue and sodium tetraborate;
• mix the composition thoroughly using a plastic spatula;
• After a minute, the glass slime will be ready.

Making slime from water

Making a slime “like in a store” is quite easy; all you need is PVA glue (office glue), water and a little time.

Technology for creating water slime:

• pour 50 ml of slightly warm water into a glass bowl clean water and 100 gr. PVA glue (it is important that its expiration date does not expire);
• the mixture must be thoroughly stirred; if it turns out to be runny, you need to add a certain amount of glue;
• now you need to pour 1 bottle of sodium tetraborate (4% solution) into this composition;
• if you purchased borax, which is in a powdery state, it must be diluted with water (in the proportion of 1 tablespoon per 0.5 cup of water);
• it is important to monitor the amount of borax and not to exceed its amount, otherwise the slime will be too hard and less flexible;
• in conclusion, any dye must be added to the composition; it can be either food or ordinary solution brilliant green.

Upon completion of the process of creating slime, it must be placed in a plastic bag and kneaded thoroughly. Important! After playing with such handgams, you must wash your hands.

How to make slime from soda

Some believe that tetraborate is not needed in children's toys, and have resorted to creating borax-free slimes. It is perfectly replaced by ordinary baking soda. Moreover, from soda you can make both a beautiful transparent slime and a multi-colored slime (if you add dye).

Creating such a handgam is simple:

• first you need to dilute 100 ml of glue in 50 ml of water;
• using a wooden stick, add a little coloring matter into this liquid;
• the composition must be stirred until all ingredients are completely dissolved and combined;
• Now you need to mix 150 grams. soda and 15 ml of water;
• add this mixture to the color composition;
• Now you need to transfer the mass into a plastic bag, shake and knead thoroughly - from these manipulations the slime will gradually thicken and become elastic.

Just a minute of exposure and your own handgam is ready! Note! This slime should only be stored in a closed jar or bag, otherwise it will dry out and lose its elasticity.

Making slime from plasticine

It’s very easy to create homemade slime from plasticine, which is found in every child’s room.

It is prepared like this:

• The process of making handgam is quite dynamic, so you need to prepare all the necessary ingredients in advance: plasticine (a strip of standard set or 100 gr.); food gelatin – 15–20 g; glass of water; container - glass or plastic for mixing all parts and metal for heating gelatin; spatula for stirring the slime.
• Gelatin should be filled with water in a metal bowl and allowed to swell for 1 hour.
• Now you need to heat the swollen gelatin over low heat, without bringing it to a boil.
• Separately, knead the plasticine until it becomes very soft and absorbs body heat.
• In a plastic bowl you need to pour 50 ml of mashed plasticine hot water and mix this mixture thoroughly with a spatula.
• Now all that remains is to thoroughly mix the slightly cooled gelatin and plasticine mixed with water.
• Finally, the slime should be put in the refrigerator and left there for half an hour, after which you can play with it.

How to make slime from shampoo

Very interesting recipe Making slime involves using shampoo, which is sure to be found in every apartment. There are several options for creating such a handgam:

• Stir in plastic container the same amount of hair shampoo, soda and water. You can add any dye or leave the slime snow-white. It should be stored in a plastic bag.
• You can combine shampoo and water with flour to get a thicker toy consistency. Important: mix the mixture in warm water and add the dye before the flour.
• Often, starch is used instead of flour, which allows you to sculpt beautiful sticky crocodiles or create your own dolphin.

Note! Slimes that contain flour turn out to be quite sticky and have an unpleasant ability to leave greasy spots on light-colored wallpaper, which is not easy to clean.

How to make slime from liquid laundry detergent

Young inventors came up with the idea of ​​using liquid laundry detergent to make slime. Moreover, ordinary washing powder or dishwashing liquid will not have the desired effect in this case, and it is unlikely that you will get a high-quality slime.

To create such a handgam you need:

• mix ¼ part of a standard tube of PVA glue with food coloring in a container;
• achieve uniform consistency and color by thoroughly mixing;
• add no more than 2 tbsp to this composition. l. liquid laundry detergent;
• stir the resulting mixture;
• if the composition is very thick, you need to slowly, literally drop by drop, add liquid washing powder to it until it reaches the desired consistency;
• now you need to carefully knead the entire composition for 5–10 minutes (it is better to wear rubber gloves);
• The finished slime is stored only in a container that is hermetically sealed.

If some of its properties are lost over time, you can put the handgam in the refrigerator for a while.

How to make magnetic slime with your own hands

It is very interesting to play with slime, which tends to be attracted to a magnet. To do this you need to do the following:

• Mix a glass of water and half a teaspoon each of borax and glycerin in a bowl until smooth.
• Separately, you need to mix 150 ml of water and 30 g. glue, gradually adding to them not a large number of coloring matter. You can make your handgam luminous, for this purpose on at this stage you need to add a small amount of phosphorus paint to it.
• Now you need to mix both mixtures, gradually adding one to the other. It is important to carry out this process slowly; as soon as the desired density of the composition is achieved, tetraborate will no longer need to be poured.
• Afterwards you need to carefully roll out the slime layer onto flat surface and pour some iron oxide into the middle.
• Now the composition is kneaded again until a uniform shade is obtained.

Method for making slime from flour

Slime containing flour is considered quite safe for children. However, in any case, you need to supervise children's games, because even the safest composition can cause choking.

You can make slime from flour like this:

• sift 2 cups of flour through a sieve;
• add ¼ part ice water to flour;
• now pour ¼ of the hot water into the container;
• the mixture must be mixed well, allowing the flour to glue everything together so that there is not a single lump in it;
• finally, pour in a little food coloring and stir the mixture again;
• Finally, the slime is left in the refrigerator for 2 hours until it cools completely.

Nail polish slime

Very interesting Velcro is made from nail polish; preparing them is not too difficult:

• Pour any nail polish into a glass container.
• Add a little to it vegetable oil, mix everything thoroughly and for a long time.
• Now, using rubber gloves, you need to remove the dye from the container, which, thanks to the oil, has accumulated in the middle. You need to gently knead it with your hands.
• Lizun is ready. You can put it in the refrigerator for half an hour to increase elasticity.

The main disadvantage of such handgam is bad smell acetone, which is inherent in every nail polish. Therefore, it is unlikely to be suitable for small children to play with.

How to make edible slime from Nutella

Every child will definitely enjoy this toy. It can be made quickly and easily. To do this you need:

• melt 100 gr. in a water bath. marshmallows or chewing marshmallows;
• the melted mass will be sticky and viscous;
• Now you need to add Nutella chocolate spread to this mass, it is better to do this gradually, in small portions;
• when the composition is slightly mixed, you need to pick it up and knead it for 5 minutes, achieving uniformity in color and consistency.

You can play with this slime a little, and then, with no less pleasure, enjoy it with tea.

How to wash slime

This toy is quite sticky in consistency, so it is not surprising that everything, including dirt, quickly sticks to it. Playing with such a handgam becomes simply unpleasant and uninteresting, because once it collects garbage, it simply stops sticking and stretching well. This problem can be corrected by washing the Velcro; in addition, you need to clean it properly:

• You can rinse it in a container of water and put it in a closed bowl in the refrigerator for a while.
• Often a syringe is used, into which you need to draw the slime and slowly squeeze it out. All debris, at the same time, collects in the nose of the syringe.

A handmade handmade item becomes truly dear to a child, and keeping it safe becomes a top priority. In order for the toy to please your baby for as long as possible, you need to adhere to the following rules:

• Store slime only in closed containers or tetra bags to prevent it from drying out and getting in dust.
• You should not use soap to wash the toy.
• Handgams should not be left near heating devices(batteries, solar window sills).
• A child should not leave a toy on surfaces that have pile (carpets, rugs, fur), otherwise he will certainly collect its particles on himself.
• If the slime no longer stretches well, you can add a few drops of vinegar or a little glycerin to it.

Slime is a universal toy that can be easily made with your own hands at home. It will allow the child not only to have a great time, but also to develop fine motor skills, which is very important for a growing person.

Not really

Today I will tell you several ways to make slime.

Slime is a very popular and exciting children's toy that will keep your child occupied for a long time.

The cartoon character was so loved and popular that in 1976 a children's toy was invented that brings pleasure not only to children, but also to adults.

Since slime is not a durable toy, you need to buy a new one every time.

But there will always be craftsmen.

In order not to waste money, it is best to try to prepare it at home and be sure that it is safe for your baby’s health.

Moreover, no special materials are required, and no time is required for its manufacture.

Believe me, your child will really like this toy.

I want to tell you how to make slime at home from scrap materials.

How to make slime without glue from toothpaste

You will need:

• Toothpaste
• Food coloring

First, squeeze a little toothpaste into a glass, I want to say right away that it is better to use a thick, gel paste

Now add a little dye, the more you add, the richer the color will be

Mix the mixture well until the color becomes uniform and no grains of dye remain.

To do this, place the mug with the prepared mixture in a pan with boiling water on water bath and hold for 15 minutes

Children's fun is ready.

If the resulting composition turns out to be dry, then you need to slightly grease your hands with any oil and knead it.

The size of your slime depends on how much paste you use.

How to make slime from PVA glue and sodium tetraborate

Necessary:

• PVA glue
• Sodium tetraborate
• Dye
• You can also add glitter if you wish.

How to do:

Pour the glue into the container.

Essential glitter. Mix well

Add sodium tetraborate, it is very easy to purchase at the pharmacy

Stir, then knead with your hands

Our slime is ready, its production does not require much work.

Making a toy from shampoo and salt

It is very easy to make, it only takes 20-25 minutes.

Take 3-4 teaspoons of shampoo

The next step is to add salt little by little, stirring constantly. Determine the amount of salt based on the thickness of the mixture

Place the mixture in the refrigerator for 10-15 minutes

Lizun is ready!

If after this the prepared mass sticks to your hands, try adding a little more salt

How to make slime without glue from flour

We will need:

First we need to pour out a glass of flour

Pour a glass of water, if the mass is thick, you need to add more water to get the consistency of sour cream

Divide the resulting mass into three parts

Paint the first one with food coloring

The second with acrylic paints

And the third with ink from a felt-tip pen, mix each until smooth

There are several ways to prepare a soft consistency

Place the first one in the microwave for 1 minute, at medium power, do not forget that the dishes must be suitable for the microwave oven

Take it out and let it cool

Place the second part in a preheated frying pan; you need to heat it, stirring all the time, until it thickens.

Pour the third into molds, put in the oven at 160 degrees for 5 minutes

All these methods are suitable

True, all this is only for one time

While the slime is warm, it is elastic and stretches well, but after cooling it becomes not so soft

Slime made from detergent and hand cream

Makes a fun, jelly-like toy

Need to:

• Detergent "Fairy"
• Hand cream
• Food coloring
• Plastic cup
• Stirring stick

How to do:

1. Pour a tablespoon detergent in a glass
2. Add a little less than half a teaspoon of soda, mix thoroughly
3. Squeeze out the hand cream, there should be a little more “Fairy” and mix it too
4. Add a little dye, stir until completely dissolved, dye – color of your choice
5. Drain everything into a bag and put it in the refrigerator for 4 hours.
6. You will get an excellent jelly-like toy, if you don’t like its consistency, try adding or reducing the amount of hand cream

Very interesting ways I recently read about making this funny toy on the blog “Altynai – Women’s Blog” http://myaltynaj.ru/kak-sdelat-lizuna.html I advise you to read it too, and if you like it, then do it.

5 ways to make slime, video

All these methods of making it at home are very accessible, and the children will like the resulting toy, and they themselves will probably be happy to knead it in their hands, stretching it and folding it into spirals.

Evgenia Smirnova

Sending light into the depths human heart- this is the purpose of the artist

Content

All children remember such a wonderful cartoon called “Ghostbusters” and its outstanding hero Lizun. After all, it served as a prototype for creating a strange but fascinating toy for children with the ability to stick to surfaces, hands, and bring a lot of delight. Children find it interesting to play with such a toy, and it’s even more fun to learn how to make slime with your own hands. Take advantage of the moment to spend pleasant and useful time with your child by creating an unusual toy together.

How to make slime at home and what you need for it

Making slime at home is a very easy task. Homemade option cartoon character will not glow in the dark like a real one, but will spread, stick, and change its shape. There are many options for creating this simple toy, as well as a variety of materials for its manufacture: for example, chewing gum, starch with water, glue, flour, gouache, alcohol, some even use condensed milk if they want to make an edible toy. You can choose a variety of colors using food coloring or, for example, gouache.

All you need is to prepare the necessary materials in advance, choose the method according to which you will act and enjoy the process of creating slime. This is very interesting, even if you don’t have children, and you have long grown out of childhood.

To extend the life of the product and give your child joy from playing, study the following points:

• a necessary condition for storing a toy is a closed container (for example, a small jar with a tight-fitting lid);

• do not leave slime in the open sun, on heating devices, radiators: it loves coolness;
• You should not place the toy on fleecy surfaces, for example, carpet, clothing, because micro hairs will stick to it and you will get a non-uniform surface;
• To make the toy original, use essential oils during production, which will add a pleasant aroma to the craft;
• for a slime with a “twist”: it’s interesting to add cosmetic glitter into the mass being made and get a “glamorous” cartoon character;

• to add flavor to the toy: add salt, sugar, condensed milk to the rest of the ingredients during the creation process;
• add a couple of drops of vinegar to the paint solution - the slime will stretch better and will not smear;
• with the help of glycerin it will turn out slippery, disgusting, just like the real thing;
• use hydrogen peroxide to make your homemade cartoon character light and airy;
• if you want the toy to look more alive, glue on eyes made of rubber buttons or paper.

Ways to make slime with your own hands - instructions with photos

There are primitive and harmless ways to create a sticky toy for the youngest children (for example, edible slime), and more “professional”. We will discuss some methods in detail in the creation instructions, using comprehensive illustrations. Here you will find a list of necessary materials, information on where all this is purchased. Let's get started step-by-step description making slime with your own hands.

From PVA glue, borax and water

This quick way make a sticky toy without much effort. A craft made in this way will be elastic, will be able to bounce off surfaces, almost like a jumper, and will remain soft. Slime made in this way is not “afraid” of water (you can safely wash it).

Source materials:

1. PVA glue pure white, with a current expiration date (this is important, because it will affect the quality of your slime), in an amount of 100 g;
2. One glass of water room temperature;
3. Borax (sodium tetraborate medical term or borax). Buy it at any pharmacy, radio or chemical stores, special conditions or there are no restrictions on its sale. Ask for either a 4% solution or in regular powder form.

1. Zelenka, food coloring, gouache, acrylic paints– to make a cartoon character colored;
2. Any container (volume 0.5 liters or more) in which mix it all and a stirring stick.

Recipe:

• mix a quarter of the water with the same amount of glue, adding the dye of your choice, for example brilliant green;

• Next, prepare one tablespoon of borax;
• Gradually add borax to the previous ingredients, stirring constantly, as a result of which the liquid will gradually begin to become thick, resulting in a viscous substance - slime.

Made from plasticine and gelatin

An easier way to make slime with your own hands is to use improvised means such as plasticine and gelatin. The toy will not serve you for long, but it will create any shape you give it. It is recommended for the youngest toy lovers, because... Capable of developing motor skills of small hands. Required ingredients:

1. Plasticine of any color, approximately 100 g;
2. Two packs edible gelatin 25 g each;
3. Warm water, at least 50 ml;
4. Two containers: one metal for heating certain components, the second plastic for manufacturing;
5. Container for stirring.

Let's start the manufacturing process:

• Dissolve gelatin in cold water in a metal container and leave to brew for an hour;
• after the specified time has passed, put the gelatin on the fire, bring to a boil using steam (heat in a water bath), remove from the heat;
• in a plastic container mix plasticine with warm water, use a wooden stick for this;

• after the gelatin has cooled, add this liquid to the plasticine, then mix thoroughly until thick and homogeneous;
• We put the resulting substance in the refrigerator until it hardens - the slime is ready.

From starch and soda

This type of making a cartoon character is easy to do, the ingredients for it can always be found at home, you don’t need to purposefully go anywhere for them or spend additional funds. However, the result of the resulting toy will not please you very much, because... its properties will not be the same as we would like: the slime will turn out to be somewhat hard, but there is a plus here: it can jump well. Ingredients for the craft:

1. Water at room temperature, about a glass;
2. Starch (100 grams), which can be replaced with soda and the same effect will be obtained;
3. PVA glue, 100 gram jar.
4. Any dye: brilliant green, gouache, food coloring, acrylic paint.

Manufacturing instructions:

• take starch/soda and mix with water 1:1 until the substance has a jelly-like consistency;
• add glue and mix thoroughly;
• Even when the consistency is liquid, while stirring, add the selected dye, for example, gouache;
• In order for the slime to be close to a cartoon ghost, the part of the added water should be larger in comparison with the part of starch or soda.

From shampoo and gouache

Another way to prepare a sticky hero: with shampoo, a certain brand of super glue and gouache. Why do you need to use a certain brand of glue, because only this type has necessary properties, which give the toy softness, the effect of sticking and spreading. So, the main components:

• 90 g of super glue “Titan”;
• 30 g of shampoo of the desired color, which is only available (take an inexpensive one);
• Gouache, any dye to give a multi-colored effect;
• Gloves for careful work;
• A small package in which our ingredients will be mixed.

How to do:

• mix glue and shampoo together in a bag;
• You should proceed from the proportions of 3:2 glue and shampoo, vary the amount of added ingredients as desired;
• It is not at all necessary to adhere to the proportions if you want to experiment and get the desired properties: add more shampoo - the toy will be more elastic, more glue– it will turn out denser;
• while mixing, add gouache to give the slime a tint or to make the color more saturated;
• if you used transparent shampoo, then the finished slime will be translucent, and if the shampoo was white, then you will need gouache.

How to make liquid slime without sodium tetraborate

If you want to tinker a little and additional cash allowing you to stock up necessary materials, then make a slime without sodium tetraborate, and it will turn out to be of very high quality, it will be vague, and as close as possible to what is produced in a factory. To achieve this result, stock up on the following tools:

1. One fourth part of unexpired PVA glue;
2. One third part liquid starch. Please note that this product is a household and household chemicals and is used when washing clothes;
3. Preferred medium for coloring: gouache, acrylic paints, brilliant green, food coloring;
4. A small plastic bag serves as a mixing container.

Step-by-step manufacturing instructions:

• pour the specified amount of starch into the bag;
• drop a couple of drops of your chosen coloring agent there, for example, gouache;
• pour in the specified amount of glue;
• Mix the resulting consistency thoroughly using your hands until it becomes homogeneous and desired color;
• leave almost ready-made slime lie in the cold for 3-4 hours, for example, in the refrigerator;
• after the specified time has elapsed, remove the substance;
• The perfect slime is ready!

Video tutorials on step-by-step creation of slime

For comprehensive information on making your own slime, watch the video tutorials below. They will help you prepare for this interesting activity, show you step by step the manufacturing steps, and tell you some tricks for creating the perfect slime. You will be convinced that the creation process itself will not take much time, and the result will please not only your child, but also you.

Step-by-step recipe for making slime:

Making slime from flour and water:

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

Lizun, or " Smart plasticine", or Handgam - a multi-colored semi-liquid mass that quickly changes its shape when touched, twisted or moved. This kind of hand toy was first created in 1976 in the USA, and gained particular popularity in 1984, after the release of the film “Ghostbusters”, where the main character was a ghost named Lizun. “Smart plasticine”, due to its unusual structure, very much attracts the attention of children for creating unusual fantasy compositions, and can also be used as a hand massager and is useful for the development of a child’s fine motor skills. On store shelves you can find a large number of slimes from various companies, but it is much more interesting to create this unusual liquid-thick slime yourself.

How to make slime at home

From English Handgam - (“hand” - hand, “gam” - chewing gum) - chewing gum for hands. Before you start creating this unusual toy, you need to understand what approximate structure you should get. So, Lizun should be semi-liquid, fluid, but keep its shape perfectly with all kinds of movements. You can compare it to a plastic bag filled with water and closed tightly. The slime is liquid, but it perfectly follows all your instructions. Don't believe me? Check it out for yourself!

To create slime at home you will need:

• PVA glue (white)
• Borax (sodium tetraborate) or Borax powder
• Food coloring
• Plastic or glass container
• Stirring stick

Let's start with the ingredients. Glue is the main component of slime, so a lot will depend on its quality. Before buying glue, carefully consider the expiration date - what earlier date release, the better your Lizun will be. Borax or Borax can be purchased at a pharmacy, and no prescription is needed, and they cost only 10-30 rubles. You will definitely have enough money from your own piggy bank! Not only food paint can be used as a dye; gouache, brilliant green, carrot juice are also suitable - anything that gives paint and retains it for some time. Any cooking utensil is suitable, since you will not be cooking anything dangerous or toxic. And finally, a stir stick. You can take a popsicle stick, a regular pencil - it doesn’t matter. The main thing is your effort and desire to create and create! Once all the ingredients are ready, let's get started!

Before you start mixing the components, it will be useful to know in advance the ratio of Borax and glue, so that you don’t have to worry about adding different amounts later. For 100 grams of glue, 1 jar of Borax is required. Remember this. Accordingly, if you want to make Lizun larger, then you will need not only more glue, but also more sodium tetraborate.

1. Pour into a bowl required amount glue. Add a few drops of brilliant green or food coloring (of your choice), or you can even combine both. The main thing is not to overdo it, otherwise not only Slime will be colored, but also your hands while playing with it.
2. Mix thoroughly. Next, add Borax to the solution. DO NOT think that a whole bottle for 100 grams of glue will be unreasonably large. If this ingredient is not enough, Slime will stick to any surface, leaving unpleasant marks.
3. Mix very well again. The result should be a jelly-like mass.
4. In order to remove all the water from the surface of the Handgam, you need to put it on paper (clean) and roll on it for some time.
5. Place the almost finished mass in a plastic bag and knead well again. The longer the better, but the approximate time is 5 minutes.

Such an unusual Lizun will be interesting not only because of its structure, but also due to the fact that the seemingly liquid structure is attracted by a magnet. To create a magnetic Handgam, you will need, in addition to the ingredients already listed above (PVA glue, borax, dye), also iron oxide. But if you want the toy to glow in the dark, buy phosphor paint.

1. In one container, mix a glass of water and 0.5 teaspoon of Boron. The entire mixture must be thoroughly mixed so that the powder is completely dissolved in water. These are minor ingredients that will be needed to activate the main composition.
2. In a second bowl, mix one glass of water and 30 grams of glue. It is worth noting that this recipe will also require a special measuring spoon; it is better not to work by eye, otherwise the result may not meet your expectations. If the entire solution is well mixed, add phosphorus paint or another dye (you can use both, naturally in moderation).
3. Carefully pour the first prepared solution into the second, constantly stirring the second composition. Immediately after you notice that the Lizun becomes thick and acquires the desired consistency, stop pouring the first solution and thoroughly mix the entire mass again. If the diluted borax with water remains, you can safely pour it into the sink or trash can.
4. Spread the finished mixture over the table and pour a pinch of iron oxide right into the middle. Mix the mixture thoroughly until it acquires a uniform color. If everything works out, play for your health! When you bring a magnet to Handgam, he reaches out to it, like a real ghost from the movie “Ghostbusters”! An unreal spectacle that will pleasantly surprise both young children and even adults!

Useful tips that will come in handy when creating Handgam

If you are going to create for yourself a useful and interesting toy, you may need some advice to guide you the right way. So:

What to do if the Slime turns out to be too watery and spreads all over your hand?
If you notice this, it means you have over-watered or added too little Borax. Don’t worry, re-read the first method again and do it again.

When stretched, the slime is divided into threads and cannot be formed
This means you have added a large amount of Borax. Dilute the solution with glue or just a little water.

Handgum hardened. What to do?
This question is one of the most popular, since many do not follow the rules for storing toys, overjoyed that they have such an interesting and unusual composition. Once again it is worth noting: Lizun must be stored in a tightly closed jar or plastic bag. If you notice that Lizun has begun to harden, just put it in a jar with a few drops of water overnight, and in the morning it will be as good as new!

Unlike store-bought Handgams, a self-prepared toy contains the most minimal amount harmful substances. For example, there is no silica, titanium dioxide and many other chemical incomprehensible words. This Lizun is not poisonous or toxic, and the result is superior even to the store-bought equivalent! Play for your health, experiment and create your own Handgams!

Video: how to make slime with your own hands

Reading time: 9 min

Today, about this funny toy, probably everyone has heard. For millions of children, interesting colorful chewing gum is one of their favorite toys. As it turns out, making slime at home with your own hands is quite simple.

You need to figure out what slime is and consider a certain number of options on how to make slime at home, yourself, with your own hands.

What is "Lizun"

Slime - that’s the original name for Lizun. The creators of the toy are considered to be Mattel. Date of birth of the toy: 1976 They started calling the toy Lizun in the 90s of the twentieth century, when the cartoon “Ghostbusters” was released. One of the cartoon characters was Lizun (ghost).

He was too similar to Slime: just as green, he could easily pass through walls. And on the surface, after it, there remained sticky mucus of a greenish tint.

One to one, just like Slime, slime is a soft jelly-like substance that can easily change shape, but does not melt in your hands. It can be both hard and elastic; if there is a sudden or strong impact, it sticks to the surface of the ceiling, flows down the wall, leaving an unattractive mark behind it. If desired, the toy can accept the most different shapes.

When the child has had enough of playing, the toy is placed in a jar. If stored in accordance with the rules, it can be used for a long time.

According to psychologists, the Lizun toy is a wonderful anti-stress. With its help, the baby can relax. His imagination will be busy. The child will grow up with a good imagination. In addition, with the help of Slime, motor skills and motor activity begin to develop well, and the nervous system is strengthened. Memory, vision, and attention are trained.

Slime is great entertainment for kids.

Children not only have fun playing with slime, but also get relief from stress. Nervous system receives a beneficial effect. The small muscles of the hand develop well during the game, as do motor skills.

The toy has a gel consistency. It cannot melt, but can take the most unexpected form.

In every store that sells toys for children, you can buy slimes. But you can make this toy yourself at home. Why not do this together with your child? It's not difficult at all.

This process will not take much time. It's too much here expensive materials and no tools are needed. It's worth considering options that are affordable and fun to make this interesting toy.

How to make slime with your own hands at home

The easiest way: starch slime

This recipe is simple and safe. This result is achieved because there is no boric acid, glue or detergents. If you make slime using starch, the steps of the process will be simple. All actions are easy to do for both children and adults.

What you will need (materials):

• potato starch(150 g);
• warm water (75 ml.);
• food coloring (2.5 g);
• You need to prepare a bowl and spoon to mix the ingredients.

Step by step instructions:

1. Pour starch into a bowl.
2. Add dye. Mix it with starch.
3. Slowly add water while stirring the mixture.

At first glance, at first, it will seem that the slime did not work out, and it is just a simple jelly. But when stirring continues for a long time, it will become visible how the liquid has become an elastic slurry.

You can play with slime, which is completely safe. For a child, the resulting toy is usually of interest for the first two days.

Then you will have to do everything again, in accordance with the recipe, to get a new slime.

Sparkling Slime made from PVA glue with glitter

To make slime using glitter, you need to have on hand:

• glue with glitter (100 ml);
• water (250 ml);
• borax (1 tsp);
• water (1 tablespoon)

Pour water into a glass. Stir borax in it. Shiny stationery glue is poured into a bowl. All. Here you will need 1 tablespoon of water. It is poured into a bowl of glue.

Mix thoroughly until the mass becomes flexible and pliable. After this, a borax solution is introduced and mixed to the required consistency to form a Lizun.

Slime without sodium tetraborate and without glue with detergent

If a trip to the pharmacy is not in your plans, but you want to make Lizun right now, this option is more suitable than others.

Manufactured Lizun, in appearance, is almost indistinguishable from purchased one. Since making this type of Lizun requires the use of detergent, you will need to wash your hands thoroughly.

Need to take:

• dishwashing liquid
• bowl for mixing ingredients
• hand cream
• dye.

How to do:
In a ratio of 1:2, you need to combine dishwashing detergent with soda. Mix everything well.
Add hand cream. Stir the mass. How much glue is needed will be visible when the ingredients are mixed.
Pour in the dye.

As soon as all these components are mixed, you should pay attention to the mass. It should be slightly runny.
Slime that is not yet 100% ready should be put in a bag. Then, for 4 hours, put it in the refrigerator. As time passes, they pull out the toy and have fun with it.

How to make slime from shampoo

You can get a funny slime if you use ordinary shampoo, add dyes and polymer glue (“Titanium” is great)
Shampoo (100 ml) is poured into the container.
Pour in food coloring (1 tsp).
Stir.
4 tablespoons of glue are combined with colored shampoo.

The resulting liquid mass is poured into a bag and kneaded by hand to obtain the required thickness.
They take out the resulting substance. All! Shampoo slime for children is ready. Place it in a container with a lid to keep the toy there.

The most harmless - made from wheat flour

If you take flour, the fun will be absolutely harmless for children. What to do?

• Sift 2 tablespoons of flour through a sieve.
• 50 ml is poured on top cold water.
• Then 50 ml hot (boiling water cannot be used).

• Mix the ingredients to obtain a homogeneous consistency.
• Pour in food coloring (3-5 drops).

• If desired, add salt or sugar.
• Stir the dough until the whole mass acquires one shade.
• Place in the refrigerator for 3 hours.

• They take it out.
• Knead with hands.

Slime made from alcohol and sodium tetraborate

Yes, this method cannot be called standard. But how interesting it is to make this toy! Just so that the result does not disappoint, you should not “deviate” from the recipe.

We need to stock up:

• Polyvinyl alcohol;
• Water;
• Sodium tetraborate (brown);
• Dyes (if desired).

It's not a problem to buy borax at the pharmacy. It is sold without requiring a prescription. The price of the product is low. It should be noted that polyvinyl alcohol is sold as a powder, not a liquid. This component is the most important in the recipe. That is why, in this case, neither vodka nor medical alcohol are suitable.

What to do:
Pour polyvinyl alcohol into a bowl (a little). Mix. Put on fire. Cook for 40 minutes. You must stir all the time. To prevent the mass from burning, the fire is kept low. After the bowl is removed from the heat, the mass should cool.

Preferably at room temperature. When the alcohol has been given the opportunity to cool, the other components are mixed at this time. Water is poured into the glass.

Pour in 1 or 2 tablespoons of sodium tetraborate. Mix everything thoroughly until the borax crystals are completely dissolved in the water.

After this, the resulting liquid must be filtered. Add alcohol (it will have cooled down by this time), in a ratio of 1:3. Mix well. If desired, add food coloring. You can use the toy!

Colored slime made from glue and borax with water

This method has gained popularity. A lot of different ways have been invented. And what ingredients are not used! You can consider one of the methods in detail.

Have to take:

• warm water(200 ml);
• a jar of PVA glue (or two);
• food coloring;
• borax (2 bottles).

Before you start working, shake the tube of glue. Then it is poured into a deep bowl. (You can also use ordinary glass jar use.)

You will need another bowl. There they mix water with dye and pour it into a jar of PVA. Mix all components until a homogeneous mass is obtained.

After this, boric acid should “go” into the mass containing the glue. As a result, you will see how the mixture will become viscous and dense in consistency. After viscousness appeared and the mass became thick.

It needs to be kneaded while wearing gloves. If you don’t have them on hand, then mix them in a plastic bag. Place the resulting slime on the leaf for half an hour or an hour. All. The child can play.

How to make from plasticine with gelatin

Plasticine, as a rule, is found in those houses where children live. It is this material that will be useful to make a popular toy. Everyone will be happy with the result!

What you will have to prepare from materials and tools:

• 1 pack of plasticine;
• 1 pack of edible gelatin;
• a spatula to mix the ingredients (or a spoon);
• jar or bowl for mixing;
• iron bowl to heat the gelatin.

How to do:
First, pour gelatin into an iron bowl. Fill cold water. Mix thoroughly. Leave for 60 minutes. How time will pass, you need to heat the gelatin that has been soaked. Bring to a boil, and immediately set the container aside by removing it from the heat.

You need to take a container (preferably plastic). Using a spatula, mix water (50g) with plasticine (100g).
Slowly add gelatin, which has already been prepared, into the resulting mixture. Mix with a spatula to obtain a plastic, homogeneous mass.

Place the bowl with the mixture on the shelf of the refrigerator so that the product completely hardens. After this, you can take it out and give the baby the slime.

Slime made from perfume and hand cream

If you use hand cream, it may turn out to be slime. But there is no 100% guarantee. But why not take a risk?

• Squeeze the cream into a bowl.
• Add dye. Stir.
• Add perfume a little at a time. The resulting mixture is stirred. It should start to thicken.
• Once the desired consistency is achieved, knead the toy with your hands.

Fun transparent slime

There will be no difficulties in making such a toy. To manufacture it you need to prepare the following components and materials:

• Transparent PVA glue (100 ml). It is sold in stationery stores.
• Boric acid, in powder form (1 tbsp);
• A bowl for mixing the ingredients;
• Wooden stick or a spoon.

Step-by-step instructions for making it at home:

1. Pour glue into a glass jar.
2. Send boron powder there.
3. Mix thoroughly to obtain a homogeneous elastic slurry.

All. You can play with slime. Only the child needs to be told that he will need to wash his hands with soap after playing.

Simple toothpaste slime

What you need to have to make this toy:

• A tube of toothpaste.
• Cup.
• Food coloring.

Step-by-step instructions for making slime at home:
Squeeze a tube of toothpaste into a glass. It is advisable to buy either a gel or a thick paste. Send the dye into the glass. If you add more of this component, the shade of the slime will become richer.

To obtain a homogeneous mass, you need to thoroughly knead the mixture. You need to make sure that all the grains of dye dissolve.

As soon as you get a homogeneous mixture, you need to send it to a water bath for 15 minutes. This is quite enough. This needs to be done to remove excess moisture. As a result, the mass will acquire a dense structure.

You need to make sure that the slime does not turn out too dry. To prevent this from happening, it is advisable to smear your hands with oil and stretch the toy. The size of the slime will depend on the amount of toothpaste you use.

Slime made from soap and toothpaste

To make a toy, you need to stock up on:

• toothpaste
• liquid soap;
• dry dye;
• flour.

Step-by-step instruction:

Mix soap and toothpaste.

Mix the dye with flour. When adding flour, it is necessary to stir the mixture without stopping. If you take soap and paste in an amount of 20 g (of each component), then 5 tsp of flour will be enough.

When all the flour is poured out, mix the whole mass thoroughly so that the dough does not acquire a homogeneous structure.
It is advisable to pour in a little water. Then the mass is kneaded until the slime becomes viscous.

An easy way to make slime from hydrogen peroxide

Since the cost of making such a toy is low, this method has become very popular. But some people are disappointed because they were hoping for a different result. According to this recipe, the toy will be hard, but it will jump well.

You will need:

• 1 glass of water;
• 100 g starch or soda;
• 100 g PVA glue;
• hydrogen peroxide;
• dye.

You need a medium sized container. There you will need to mix water with soda (or starch), in equal ratio. It is necessary for the mass to form a jelly-like state. Then you need to pour in the glue. Mix well.

Hydrogen peroxide must be poured into this mixture. Add dye. Mix again. It should be noted that the slime eventually becomes airy precisely because of hydrogen peroxide. If it becomes clear that the mass is too thick, you need to change the proportions by adding more water.

Slime using washing powder

To make such a slime, you will need to use a liquid analogue of washing powder. No need to try using gel or liquid soap. The toy will not work, because the consistency will be different.

Before you begin production, you must have:

• PVA glue;
• liquid washing powder;
• food coloring;
• thin rubber gloves;
• container.

Manufacturing stages:

Pour PVA glue (1 cup) into the prepared bowl. You can pour in large quantity, or maybe less. This will depend on what size you want to make the slime.

Place 5-6 drops of food coloring in PVA. Stir until the mixture acquires a uniform color.

Take 2 tbsp. liquid washing powder. Pour into mixture. Mix the solution thoroughly. You will see how, over time, it becomes sticky. It is necessary to bring the solution to the state of putty. In the event that the solution is very thick. Drop by drop, add liquid powder to dilute the mixture.

Wear gloves. Remove the solution from the bowl and start kneading it like dough. You need to get rid of excess drops of powder.

If this is not done, the slime will be similar in consistency to soft rubber.

It is necessary that the toy is stored in a closed container. When it becomes clear that the toy is losing its properties, it needs to be put in the refrigerator for three to four hours.

How to make slime from magnets

Magnetic slime is considered an original toy. He will be able to emit a glow in the dark. You can make this toy yourself at home.

• Neodymium magnets;
• boru;
• water;
• glue;
• iron oxide.

Pour 1 glass of water into a bowl. Add 0.5 tsp. burs. Mix well to completely dissolve the boron in water. A mixture will be needed to activate the second half of the composition.

Pour 1 cup of water into another bowl. Add glue (30g). Mix well. Pour in paint. To make the slime shine in the dark, it is advisable to use phosphor paint.

A boron solution is gradually poured into the glue mixture. At the same time, you need to stir the adhesive mixture all the time. At the moment when the mixture begins to harden and acquires the desired consistency, there is no need to add boron solution. What is left is poured out.

The resulting slime must be leveled on a table or board. Iron oxide (a little) is poured into the center of the toy. Knead the slime until it all turns gray.

The magnetic toy is ready. When the slime comes into contact with the magnet, it will crawl behind it.

DIY shaving foam slime

As is clear from the title, the main component in making the toy will be shaving foam. The recipe is popular because it is simple.

You need to prepare materials:

• Shaving foam (150 g);
• 100 ml PVA glue;
• Medium sized bowl;
• Spoon for mixing ingredients;

How to make slime at home from men's shaving foam:

Pour glue into a container.
Gradually pour foam into it. The key word is "gradually".

When the slime has become viscous and elastic, this indicates that enough foam has been added. That's why 150g is a rough guide. The person making the slime must take control of the amount of foam.

The components are mixed until a ball is formed, the structure of which is dense. It shouldn't stick to your hands.

Then they knead the slurry until the structure becomes elastic. If the slime is mixed well, it will not stick to your hands.
If you want the toy to be bright and beautiful, add food coloring during the manufacturing process.

What to do if the slime doesn't work out

In the event that the slime failed to do so. As intended, all errors are easily corrected.

1. To give the toy elasticity, you need to add a few drops of vinegar. Then it will stretch better
   If you add a few drops of hydrogen peroxide, the mass will turn out more fluffy. This is usually done when making fluffy slime.
2. To make the slime slippery, you need to use glycerin.
3. A luminous toy is made using fluorescent paint.
4. When the slime is very soft, put it in a jar and sprinkle a little salt on top. Close with a lid. So the toy should stand all night. The toy will become elastic as the salt absorbs excess moisture.
5. When the slime turns out to be hard, you can soften the structure by placing the slime in a jar, adding water, and leaving it overnight under the lid.
6. To give the toy pleasant aroma, it is advisable to use essential oil, vanillin or food flavoring.
7. By adding tiny sawdust or iron oxide, you get a magnetic slime. The toy must be kneaded thoroughly to distribute the additive evenly. As a result, the toy will be attracted to any magnets.
8. An “anti-stress toy” will work if the mucus is in balloon. This is done using a large syringe without a needle.
9. In order to make the slime larger in size, place it in a bowl of water for 3 hours. Don't worry if it breaks into several pieces. Everything is according to the rules. You need to add a little body or hand cream and salt. Mix. The slime will become elastic and increase in size.

On a note! You can add foam balls to the toy, different colors. This will not only increase the size of the slime, but also make it bright.

Rules for caring for slime

The toy, which both children and adults are delighted with, sticks to surfaces and leaves no marks behind - this is the famous slime. It can be compared to thick jelly or jelly.

It is made using a jelly-like material. That is why, over time, it ceases to be elastic and attractive.

If you know how to care for your slime, you can extend its lifespan. It is necessary that the toy “be neat.” So that it would be pleasant to play with.

Where to store

For the slime, you need to select a separate container with a lid. Store it on one of the refrigerator shelves. Storage in the freezer is prohibited.

How to care for slime

The main thing to follow is to make sure that the slime is not dirty. Slime has sticky properties, so small particles of debris easily stick to it. It is advisable that the toy should not be in places where there is dust.

For example, dust accumulates under the sofa. Do not allow the slime to come into contact with surfaces covered with lint. If the slime is dirty, remove the debris using alcohol. The second option is to remove it carefully using tweezers or a needle. You can also remove particles of debris with your finger, if possible.

Slime “doesn’t like it” if the air in the room is too dry, or vice versa – very humid. If the room is dry, it may become hard and lose its sticky properties. And if there is excess humidity, it swells and becomes more humid.

How to act in such a situation? What should I do to prevent the shape of the toy from becoming deformed? If there is not enough moisture, the slime will dry out. We need to save him by pouring a little water (5-7 drops) into his “apartment” (container). The slime will absorb moisture. This will help him recover.

If suddenly the toy becomes liquid due to excess moisture, using regular table salt. Pour a few grains of salt into the container. Cover the top with a lid. The “house” is shaken in the air.

To make the slime grow, pour a few drops of water into the container overnight. Close with a lid. Place it on the refrigerator shelf. You cannot store the toy in the freezer, otherwise the slime will become covered with frost.

When a toy is not played with for a long time, it may become moldy. If mold is found, it is advisable to throw away the slime.

Video: how to properly store Lizun