Place a barbell in the bathroom. How to choose and install curtain rods in the bathroom: step-by-step instructions. How to install cornices: types of installation, stages of work

A corner cornice for curtains in the bathroom allows, after its installation, to equip the room with a special curtain that prevents water from splashing during the reception process water procedures.

This design is still very common, since the layout of our apartments has remained unchanged and no other design is often suitable for them. Wherein modern industry produces many varieties of such cornices, which allows them to fit into almost any modern version bathroom design.

A corner cornice for curtains in the bathroom allows, after its installation, to equip the room with a special curtain that prevents water from splashing during water procedures

Corner curtain rods for bathtubs are divided into several types depending on their shape, the materials from which such structures are made and the type of installation of the cornice. For example, depending on the shape, these products are divided into standard and non-standard. In this case, samples of the second type are usually models of various curved shapes, installed in rooms of an unusual configuration.

Corner curtain rods for bathtubs are divided into several types depending on their shape, the materials from which such structures are made and the type of curtain rod installation

As for standard curtain rods, they are:

1. Direct ones, which are most often found on sale and are distinguished by their simplicity. They have quite a lot of mounting options, so they are simply perfect for the interiors of rectangular rooms.
2. Arc ones, which are great for both corner and round bathtubs. However, sometimes they require the installation of an additional fixing element, which is worth remembering when purchasing them.

If it is necessary to install a product of a non-standard shape, it would be best to order it individually from the manufacturer, who will take into account all the requirements and wishes of the customer as much as possible

1. Corner. The corner cornice for the bathroom requires the installation of an additional intermediate fastening to the wall. Models of this shape are best suited for decorating those rooms custom size and layouts. Metal strings can be used as an additional attachment to the ceiling.

Depending on the design, today experts distinguish two types of these products:

• string or tension rods;
• telescopic or sliding.

The sliding curtain rod for the bathroom is convenient option design, its operation is more comfortable and convenient compared to tensioning versions of cornices. This is due to the fact that its length can vary within a significant range at the request of the homeowner. At the same time, installing it in place does not present any particular difficulties. Tension systems have long been considered obsolete structures. The disadvantage of such devices is the ability to sag over time, and if the curtain is replaced, it may be necessary to lengthen or shorten the supporting metal string. In fact, replacing a bathroom curtain may require replacing the entire curtain rod structure.

When purchasing curtain rods, be sure to pay attention not only to their shape and design, but also to the material from which the product is made. Rods for bathroom curtain rods can also be made from materials such as polyethylene, steel, bronze or brass. For light curtains, it is best to purchase rods made of polyethylene, and for curtains made from a material that is heavy, it is better to install metal rods; in addition, tension curtain rods for the bathroom can be used for installing both light and heavy curtains.

When purchasing curtain rods, it is imperative to pay attention not only to their shape and design, but also to the material from which the product is made

If it is necessary to install a product of a non-standard shape, it would be best to order it individually from the manufacturer, who will take into account all the requirements and wishes of the customer as much as possible. If the owner finds it difficult to make a choice the right type cornice designs for the bathroom, it is better to seek help from a specialist in this matter.

On a note! Additionally, an invited specialist can carry out the entire volume installation work, which will allow you to avoid mistakes when installing curtains in the bathroom.

Main features of plastic, metal and combined rods

Curtain rods, depending on the materials used in their manufacture, can differ significantly in their characteristics:

1. Plastic rods. Have excellent appearance, light weight, and also quite affordable prices. During the process, they practically do not make any sounds. This is their big advantage, although there are also quite serious disadvantages. For example, over time, such products quickly lose their color and shape. In addition, things made of plastic are not designed for heavy loads, so unless you bought a rod made of special high-strength plastic, do not try to hang heavy curtains on them.
2. Metal. These are the most common models made from of stainless steel, brushed aluminum and other metals. They cost an order of magnitude more than plastic ones, but they are more durable, which is why you can hang heavy curtains on them. When purchasing such curtain rods, be sure to pay attention to the rings supplied with them. Metal rings make a lot of noise when moving, and plastic rings are too fragile, so the best option in in this case will be the use of combined products made of metal-plastic.

Plastic rods have an excellent appearance, light weight, and also very affordable prices

1. Cornices made from combined materials. Typically, such products combine metal and plastic in their design. As a result, they acquire high strength characteristics combined with a low level of noise they emit.

If we consider metal curtain rods separately, then when choosing them, it is imperative to take into account the properties and qualities of the metals from which they are made. For example, aluminum is highly resistant to moisture and chemicals, as well as temperature changes. At the same time, products of this type weigh little, but are very durable, but what is unpleasant about them is their matte coating, which does not look too good against the background of modern finishing materials.

Aluminum perfectly withstands moisture and chemicals, as well as temperature changes

Chromed steel products look great in any interior, and they are very durable. Your children can even hang on them; such curtain rods will not break or bend. In addition, rods of almost any shape and even a cornice for an asymmetrical bathtub can be made from metal, although the cost of such a product can be quite high.

Chromed steel products look great in any interior, and they are very durable

This circumstance is worth keeping in mind when choosing a suitable bath bar.

Features of installation of cornices

Any models of curtain rods are mounted according to the same principle. The semicircular bathtub cornice is installed in place using ordinary flanges attached to the wall. However, of course, there are some nuances; for example, a U-shaped curtain rod for a bathroom will be mounted at more than two points on the wall.

In any case, to perform the above work, you will need special tool. This is a hammer drill with drills for tiles or concrete with a diameter of five millimeters, construction knife, as well as a screwdriver and a hammer. You will also need a square, a pencil, and a tape measure for marking. Also, be sure to prepare fasteners such as screws or dowels. It is worth remembering that such fasteners can be supplied complete with the cornice itself.

It is worth noting that modern cornices are installed in place in three ways:

• to Wall;
• to the ceiling of the room;
• in a universal way.

Let's first consider the installation of this type of rods, such as a telescopic curtain rod for the bathroom. Due to the fact that telescopic models are very unreliable, they are categorically not recommended for installation in homes where there are children, although this type cornices are very common in modern bathroom interiors. The fact is that “telescopes” look modern and stylish, which makes modern women install them instead of more durable monolithic metal products.

If you bought a telescopic rod, then know that you will only need to mark the place for its installation; you will not need to drill the walls or ceiling. The sequence of actions in this case will be as follows:

1. Measure the distance from the ceiling - 15 centimeters. In this case, the edge of the curtain should freely descend into the bathtub, and not be placed above its edge.
2. Using a level, locate the mounting location for the cornice and mark it with a marker.
3. Check how the telescope mechanism works.
4. Please read the instructions that came with the extension bar.
5. Extend your cornice to the desired length, adding a little more (0.5-1 centimeter).
6. Place hooks or rings on the barbell if they are not removable.
7. Reinstall the product and check the reliability of the entire structure.

Naturally, installation without fasteners imposes restrictions on the use of such a structure, so you will have to make sure that your children do not hang on it.

Installation without fasteners imposes restrictions on the use of such a structure, so you will have to ensure that your children do not hang on it

In addition, do not hang heavy curtains on such a rod. If they are necessary, choose other options for their placement that have a more durable fastening.

Installation of cornices with flanges

In the case when you want to mount an L-shaped curtain rod for a bathroom with flanges, you will still have to drill the walls of the bathroom and, possibly, the ceiling. First you will need to mark the location of future installation. To do this, you will need to mark two holes for mounting the flanges. The distance between them will be determined by the length of your cornice.

To make this process easier, hold the curtain rod against the wall and use a marker to mark where the flanges will fit against it.

To make this process easier, hold the curtain rod against the wall and use a marker to make marks where the flanges will meet it. In this case, it will be necessary to remember that the optimal height for attaching the cornice will be 1.6 meters from the bathtub. It will allow the curtain hung on the rod to hang at a distance of about twenty centimeters below the level of your bathtub. As a result, when taking a shower, you will not splash on the floor.

Typically flanges are made in a round shape and they have three holes for screws, so you will need to mark three points for drilling. This itself is performed after you remove the flange from the wall using a hammer drill. After this, the flange is applied to the installation site and screwed to the wall with self-tapping screws.

An additional fastening - a bracket - is mounted using a similar system, if necessary. Fastening can be done not only using self-tapping screws, but also with the supplied dowels or screws, tightened using a special hexagon. Curtain rods for straight-shaped bathrooms are secured in a special clamp of the flange and bracket.

Important! It is worth remembering that the industry currently produces a large number of curtain rods of various designs.

In this regard, it is worth studying them very carefully before starting installation work. For example, in some designs great importance has whether the clamping screw is head up or not. At the same time, only the correct location of such a screw will help you avoid sagging of the curtains that you hang on one or another cornice.

It is also worth remembering that corner structures require additional fastening, since they are long. Usually, the places of bends - the corners - are additionally fixed, since this is where the threat of sagging is most likely. A suspension is usually used for this. Installing something like this fastening element no different from replacing the flanges.

Sometimes it happens that the options for bathtub curtain rods that the trade offers do not suit you. This usually happens because your bathroom layout is unconventional and standard solutions suitable for her. In this case, it makes sense to think about how to make a barbell of the size and shape you are interested in. Thus, you can satisfy your most unusual needs.

The straight design can be used when your bathtub is large and standard curtain rods for it are simply too small

The most simple solution this may result in a straight design. It can be used when your bathtub is large and standard curtain rods for it will simply be too small. In order to make a bar of the required length, in this case it will be enough for you to purchase an aluminum profile or stainless pipe. Next, they are cut to the required length and installed in place. Decorative plugs are placed at the ends and the cornice is ready for use.

Despite the popularity of glass and plastic bathroom curtains, the demand for them is only growing. This is explained not only at an affordable price and ease of use - correctly selected curtains play an important role in interior design. But even the most beautiful canvas needs to be hung skillfully, otherwise it’s unlikely to achieve the desired effect. And here the cornice or rod for the curtain in the bathroom comes to the fore - it seems simple and discreet, but such an important accessory.

For the curtain to look harmonious, the cornice must follow the shape of the bathtub. And bathtubs are now quite diverse: in any plumbing salon there are models of rectangular, round, oval shape, as well as angular and asymmetrical. That is why the range of rods is also quite impressive, and making a choice is not at all easy.

Types of rods by shape

1. . These are standard models that are mounted horizontally between two opposite walls. They have the simplest design and differ from each other only in length and diameter.
2. . These include semicircular, arched or L-shaped models. Designed for corner baths, they make it possible to completely close the space on both sides.
3. . The most decorative models, designed to be used separately standing bathtubs or completely open shower. Eat combined options, on which the overhead shower and curtain are simultaneously attached. They look very stylish, unusual, and easy to use.
4. Special rods. These products are intended for designer baths Asymmetrical in shape, they are made mainly to order and are exclusive models.

By material

1. . Plastic products are the most inexpensive and lightweight, and have the greatest variety. color range. Curtain holders move along such curtain rods almost silently. In this case, curtains must be hung only from lightweight materials, otherwise the rod will begin to sag. Over time, the color of the coating becomes faded, microcracks and ring marks appear on the surface of the rod.
2. . More durable and durable, at a price slightly more expensive than plastic ones. Have attractive appearance, are resistant to temperature changes, washing, corrosion and mold, but under the influence of loads they can become deformed. In addition, hollow aluminum rods amplify sounds, and therefore it will not be possible to quietly close or open the curtain.
3. . The most durable option. Such rods are not subject to deformation even under increased loads; they retain the smoothness and shine of the surface for years. They are not afraid of corrosion, fungi, and are easy to clean from plaque. Steel rods are more expensive than others, but they are well worth their price.
4. Combined. This type of cornices is made of metal and covered with a special plastic that is resistant to various types of influences. Such rods do not bend under loads, do not lose their aesthetic qualities for a long time, and do not make noise when the rings move.

By mounting method

Telescopic method. Only suitable for straight rods not large sizes. The telescopic design allows you to select the desired length of the cornice and secure it using a spacer or spring mechanism between opposite walls.

• Pros: No installation required accurate measurements and drill the walls, installation takes a couple of minutes. If necessary, the bar can be easily moved higher or lower.
• Disadvantages: this type of fastening is not the most reliable - pull the curtain hard enough and the rod may fall. For this reason, it is not recommended for families with small children.

Fastening with dowels. This reliable way, and it is suitable for rods of any size and configuration. Most often, rods are attached to the walls, sometimes only to the ceiling, and products of large sizes and complex shapes are simultaneously fixed to both the walls and the ceiling.

• Pros: the screwed rod will never fall, the choice of cornice is not limited a certain form and dimensions.
• Cons: installation requires tools and skills to work with them, as well as accurate measurements. If you subsequently need to rehang the bar, you will have to seal the holes from the fasteners in the walls and ceiling.

Design features

Each type of barbell has its own design features, affecting the type of installation. Straight rods are divided into three types:

• telescopic– are a construction of two tubes of different diameters and rotary mechanism. The smaller tube is located inside the larger one, and during installation it extends to the required length, and the mechanism ensures reliable fixation in this position;

  Telescopic rod for bath curtains 80-140 cm

• expander cornice– a version of a telescopic rod, only instead of a rotating mechanism, springs located at the ends of the product are used;
• fixed length rods– are a tube with flanges and decorative caps at the ends. Fastening is done using flanges on dowels, and caps cover the fastening elements, increasing the aesthetic appeal of the structure.

All curved models are divided into rigid and flexible. Rigid ones consist of hollow metal and plastic tubes of various sections. The shape is given to them at the stage of manufacturing the rod, and the only thing that can be adjusted during installation is the length. When adjusting the cornice to the size of the bathtub, the excess is simply cut off.

For the manufacture of flexible rods, a special aluminum profile or aluminum tape is used. There are also plastic options, but they are not very suitable for the bathroom. Such products are easy to give the desired shape, so they are ideal for non-standard asymmetrical bathtubs. Of course, their cost is much higher than tubular models, but the demand for them is quite high.

Concerning corner models, then they can be solid or prefabricated. Small rods are made from a whole piece of tube or profile. They are reliable, durable, and do not require additional fastenings. Prefabricated structures consist of several parts that are tightly connected to each other. This makes it possible to easily reduce the length of the rod if necessary, but requires the presence of ceiling hangers. Without them, the product will sag under load, and most of all - at the joints.

Manufacturers of curtain rods

On the domestic market, rods for bathroom curtains are represented by a large number of manufacturers, because this accessory is quite in demand. Not the last place is occupied by Russian brands, whose products meet the highest requirements, although they are not very diverse. To make your choice, it is worth studying in more detail the range and main characteristics of popular models.

bathroom curtain rod

Boom installation technology

Installing a rod is a fairly simple process, but it also has certain subtleties. Below are options for installing cornices in spacers and on flanges, with ceiling hangers. The nuances of fastening to concrete walls, tiles, drywall and plastic sheathing will also be considered.

Installation of a straight rod in a spacer

To work you will need a tape measure, a level, a pencil and the bar itself.

Step 1. Based on the length of the curtain, select optimal height for the rod. The bottom edge of the curtain should freely fall into the bathtub by at least 20 cm to avoid splashing water, and there should be a distance of at least 15 cm between the rod and the ceiling. Measure the required height with a tape measure and mark a point with a pencil. Place a mark on the opposite wall in the same way.

Step 2. Unpack the rod and be sure to read the manufacturer's instructions to avoid installation errors. Check how the mechanism works.

Step 3. Extend the tube to the required length, add another 1 cm, string the curtain rings if they are not removable.

Step 4. Lift the barbell and carefully place it in place, bringing one end in first and then the other. Place a level on top and make sure the cornice is positioned exactly horizontally. If it is not, correct it by applying pressure at the base. Then press lightly with your hand in the center - a properly secured rod should not move a millimeter. After that, all that remains is to hang the curtain.

Mounting the rod on flanges to a concrete surface

To work you will need:

• drill;
• screwdriver;
• tape measure and pencil;
• level;
• rod and dowels with self-tapping screws, which are included in the kit.

Step 1. Unpack the rod, check the presence and integrity of all elements. Select a convenient mounting height, taking into account a 10-15 cm wide gap between the ceiling and the rod. Now attach the rod at the desired height to the wall surface and determine the attachment points. The design should be positioned so that the curtains can completely cover the bathtub, but do not interfere with water procedures. Mark the fastening points with a pencil.

Important! Before starting work, you should make sure that there are no electrical wiring, water pipes or other communications in the areas where you intend to drill. You can check this using special device– a household hidden wiring detector.

Step 2. Using a level, check the position of the marks relative to the horizontal, and correct them if necessary. If the distance between the marks is large, it is most convenient to use a water level.

Step 3. Next, take the first flange and attach it to the wall so that the mark is exactly in the center. Use a pencil to mark drilling points through the holes on the flange. Do the same on the other side.

Step 4. Now, using a drill with a hammer drill mode and a concrete drill, make holes the size of the dowels at the marked points. The diameter of the drill must match the diameter of the dowel. Typically, the rod comes with self-tapping screws and dowels measuring 6 mm. The depth of the hole should exceed the length of the fastener by approximately 5 mm. Typically, standard round flanges have three holes.

Step 5. The holes need to be cleaned of dust, dowels inserted there, and hammered in tightly. Next, attach the flange again and screw it with self-tapping screws. The flange is secured on the other side in the same way.

Step 6. D Next you need to take the bar, put silicone liners on both ends, and pull decorative caps on them so that they are each turned in their own direction. If the rings for the curtain are non-removable, they need to be strung before attaching the second cap.

Step 7 Now loosen the clamping screws on the protruding part of the flanges, insert the ends of the rod one by one. Tighten the clamping screws until they stop on each side, and push the decorative caps close to the wall surface.

Rods are mounted on brackets in a similar way - first the brackets are attached to the wall, then the ends of the rod are inserted into them. The main condition is to accurately take measurements, because correcting errors will not be easy.

The main difference here is the presence of a ceiling suspension, otherwise the procedure for attaching the rod is almost the same as for previous version. Hangers, mounting rings, and additional screws and dowels are usually included with the rod.

Step 1. The rod is assembled by inserting straight tubes into the corner elements. Try the product on the wall; if the rod is too long, cut off the ends.

Step 2. Put both brackets on and lightly fix them on the rod with screws. Place it on the wall at the required height, check the horizontal level, and mark drilling points through the holes in the brackets.

Step 3. Remove the brackets from the cornice and put everything aside for now. Next, holes are drilled with a diameter of 6 mm and a depth of 40-45 mm, dowels are inserted and hammered in with a hammer.

Step 4. The brackets are individually screwed to the walls with self-tapping screws, a fastening ring for the ceiling suspension is put on the rod, the ends of the rod are inserted into the brackets and secured with screws.

Tighten the screws. Scheme

Step 5. A fastening attachment with holes for self-tapping screws is screwed onto a thin metal tube with a thread that acts as a suspension. Apply it to the rod so that the nozzle rests on the ceiling, and the tube itself adjoins the rod at a right angle in the bending area. It is the corner area that most needs additional support. Mark the cutting point on the tube with a pencil and saw off the excess.

Step 6. The free end of the tube is inserted into the fastening ring on the rod, clamped with a screw, after which the suspension is lifted vertically and pressed against the ceiling. Drilling points are marked through the holes of the nozzle, then holes are made, dowels are driven in, and the suspension is screwed to the ceiling.

If the rod is too long or has a more complex shape, you will need not one, but 2-3 hangers, located at an equal distance from each other. This method suitable not only for concrete ceilings, and for plasterboard surfaces, as well as covered with plastic. The features of such installation will be discussed below. The only exception is suspended ceilings, in which case other fastening options must be used.

A U-shaped rod is also mounted according to the angular type. The only difference is that both ends are fixed on one wall. Usually models small sizes They only have a wall mount that can easily withstand a load of 4-6 kg. But keep in mind that this requires a very strong, reliable foundation - hang the bar only on drywall or plastic panels it is forbidden.

Installation of flexible profile

Installing an aluminum flexible curtain rod is also not particularly difficult. To give the product the required shape, you must first draw a template. A large piece of thick cardboard is suitable for this. Place its edge against the side of the bathtub and trace the outline, making small allowances along the edges - 2-3 cm.

Step 1. Take the profile in your hands, press in the middle with your knee and bend it little by little. The material bends quite easily, so try not to press too hard. As you work, constantly try on the profile against the template so that you don’t have to straighten excessively bent corners later.

Step 2. The finished profile must be attached to the wall and the mounting locations must be determined. If the profile consists of several parts, they are fastened together using special plates that come with the cornice.

Step 3. Attach the brackets according to the marks and mark points on the wall through the holes with a pencil. Drill, insert dowels, screw the brackets to the wall.

Step 4. Now take the hangers, put the fastening attachments on them and attach them to the fixed brackets so that the attachments rest tightly against the ceiling, and the lower ends are located at the level of the profile fastening. Since the tubes are quite long, you will have to cut them, and to do this, mark the cut line with a pencil.

Advice. To increase the security of the attachment, drill a hole in the tube for the clamping screw located at the bottom of the nozzle. When tightened, the screw will enter the tube, and it will not be able to slip out even with increased load on the cornice.

Step 5. Insert curtain hooks into the profile, lift the structure and insert its ends into the brackets. Secure them with self-tapping screws on the bottom side.

Step 6. Insert the hangers into the holes on the connecting plates, screw them lightly and mark the mounting points on the ceiling. Drill, secure the dowels, and then insert a long self-tapping screw into the hole of the nozzle and use a screwdriver to fix it to the ceiling. Now you need to insert the tube all the way and tighten the screw. Secure the remaining hangers in the same way.

Step 7 The free end of the hanger should fit into the hole on the connecting plate. To do this, the profiles are moved apart a little, the end of the tube is threaded through the hole, and they are fixed with self-tapping screws on the bottom side of the profile.

After this, all that remains is to move the profiles back so that there are no gaps left, and screw them to the plate with screws through the corresponding holes along the upper edge.

Features of installation on different surfaces

On concrete walls lined with tiles

To secure the rod to the tile, you first need to make sure that the cladding is strong. If the tiles are weakly held, the seams are crumbling, traces of fungus are visible on the surface, you cannot attach anything to the wall. First you will have to dismantle poorly secured elements, remove any remaining glue, clean out the seams and re-face everything.

How to drill tiles in the bathroom

Everything else is done according to the technology described above.

On drywall under tiles

As a rule, walls and partitions made of plasterboard adjacent to the bathtub are tiled. Paint and waterproof plaster under direct exposure to water cannot provide reliable protection to such material, unlike tiles. But this design makes it a little more difficult to attach accessories, as it requires special care.

Instead of standard dowels, butterfly dowels are used.

If the rod is large and heavy, the fasteners in the drywall will not withstand the load and will become loose over time, which means you need to drill deeper - to concrete base. In this case, the fasteners also need a large length, taking into account the thickness of the drywall, tiles and the gap between the gypsum board and the wall. The kit usually includes self-tapping screws measuring 5x40 mm, so you will need to purchase separately self-tapping screws of the same diameter, but 80-100 mm long. The dowels, accordingly, should have a diameter of 6-8 mm and a length of 80-100 mm.

The marking is carried out as standard, as on other surfaces. A drill should be at least 10 cm long and must be sharply sharpened. You need to drill at low speeds (1000 rpm), holding the tool firmly and preventing it from slipping. Having drilled through ceramics and drywall, the drill is changed to a Pobedit one and continues to go deeper into the concrete. After this, the rod is mounted on the dowels.

After tightening the self-tapping screw, you get this kind of stop on the back side

On plastic panels

Installing the rod on plastic-lined walls is quite simple. Plastic is not afraid of vibrations and is easy to drill. Here, too, you need to use long dowels, since you cannot attach the rod to the plastic itself - it simply will not withstand the load from the cornice and curtain, and the fasteners will tear out of the sheathing. So, take a regular drill and make neat holes in the plastic at high speeds. Then Pobedit drill in hammer drill mode they drill concrete. When fixing the product with self-tapping screws, it is very important not to overtighten them, otherwise the plastic will be deformed and may subsequently crack.

If you plan to install the rod in a spacer, keep in mind that thin plastic will bend and be pressed under such influence. It is best to prepare a stop for the rod at the stage of wall covering: at the location of the rod, fasten two strong boards on the wall to the thickness of the sheathing. Otherwise, to avoid pushing through the plastic, the rod will have to be mounted on dowels.

When choosing a curtain rod for the bathroom, you need to consider first of all the quality and durability of the product. In order not to change the barbell every 3-4 years, pay attention to steel and metal-plastic models. Inspect them carefully before purchasing: there should be no scratches, abrasions, or other defects on the surface, and the parts should fit tightly at the joints, leaving no gaps. Be sure to check the package contents, availability of fasteners and manufacturer’s instructions.

As for design, a lot depends on the interior of the bathroom. All accessories must be in harmony with each other and correspond to the overall design style. If the faucets and cheap stand are metal and made in retro style, then plastic colored rods do not match them in any way. The shape also means a lot: in a spacious, light bathroom, rods with curly curves and ring options look advantageous, while straight models are more suitable for small rooms.

Curtain rings also come in a wide variety of shapes and materials. The most practical are metal rings with polymer coating. Ordinary metal rings rattle, leave abrasions on the rod, and do not glide smoothly. Plastic does not last long and quickly loses its visual appeal. But metal with a polymer coating does not have such disadvantages, so using such rings is very convenient.

Video - Installation of a flexible rod

The modern market offers many options for curtain rods in the bathroom. They have different shape, are made from different materials, are mounted differently. It is better to understand this variety in advance in order to buy exactly the cornice that will fit well into the interior and will be easy to use.

The curtain rod for the bathroom has cylindrical shape. That is, it is a pipe of different diameters that can be bent in different ways. Therefore, the cornice can be:

• straight;
• angular;
• oval;
• figured.

A straight curtain rod is a standard rod that runs along the length of the bathtub. Such cornices appeared a long time ago. Their main difference is length and thickness.

Corner rods are very convenient for those rooms where regular bath stands in the corner. Such a cornice can be curved at a right angle or have an arched or o round shape. An oval or rounded curtain rod (ring rod) is best hung over the bathtub, located in the center of the bathing area, so that the curtain protects from splashes along the entire perimeter.

Corner bars for bathroom

If the bathtub or shower tray and the bathroom itself have an asymmetrical shape, you will need a curved cornice. If you cannot find a suitable one in a special store, such a cornice can be made in a workshop to order.

With so many options, you can choose the most convenient one. The curtain will cover the bathtub not only from the side, but also from the ends.

Instead of a regular barbell, you can purchase tension option, the so-called string. It doesn't look as stylish, but it's easy to install and inexpensive.

The telescopic rod is very convenient. Its length can be changed depending on the size of the room using a special sliding mechanism. If the bathtub was moved during the redevelopment of the room, it will be possible to do without replacing the cornice.

2

Most often, curtain rods for bathroom curtains are made of plastic, aluminum or polished stainless steel. Plastic cornices can be of almost any color. It is easy to choose according to the main color scheme bathroom interior, curtain color, etc. Another advantage of such curtain rods is their low cost. However, over time, such rods sag, become deformed and need to be replaced. If overloaded, such an accessory easily breaks. Only curtain rods made of polymer metal-plastics are strong and durable.

The aluminum rod is usually matte and lightweight. Its acquisition also does not require high costs. Such cornices are not afraid of temperature changes, high humidity and are resistant to corrosion. The strength of aluminum rods is higher than that of plastic ones. If overloaded, such a rod will not break, but may bend under the influence of weight.

Brushed aluminum rod

A steel cornice costs an order of magnitude more, but it is not in danger of deformation. Stainless steel is resistant to moisture and corrosion. These rods are usually polished and shiny. Modern technologies allow coatings that imitate bronze and precious metals to be applied to such cornices. It will look good in the appropriate interior. The plasticity of the metal makes it possible to make rods of the most complex configurations.

When choosing a cornice, one more point should be taken into account - the sound produced by the product during use. Moving the curtains around plastic cornice happens almost silently.

If you hang a curtain on an aluminum or steel curtain rod using metal rings, there will be a lot of noise when moving. Plastic rings on a metal cornice will make almost no noise, but after a while they may become deformed or break. Therefore, it is best to purchase a steel rod with metal rings coated with plastic.

3

A curtain that protects against splashing water is not only functional, but also a decorative interior detail.

The curtain is always in sight, it is the most noticeable detail of the interior, so it needs to be chosen correctly in style and color.

Curtain selection

Except decorative qualities must be taken into account when choosing curtains specific gravity. Especially if the curtain is purchased for a curtain rod made of aluminum or plastic. For such curtain rods, lightweight polyvinyl chloride (PVC) curtains are needed. You can hang curtains made of thick polyethylene or heavy textiles on a steel cornice.

It is quite possible to install a bar in the bathroom yourself. It is advisable to do this together with an assistant. This will simplify the task and speed up the installation process.

4

At long length The cornice must be secured using additional ceiling or floor fasteners. If you choose them correctly or make them to order, such mounts will become interesting design solution when decorating a bathroom.

To install the cornice, you must prepare the following tools in advance:

• a knife to easily open the package;
• building level;
• electric drill with impact mechanism or hammer drill;
• concrete drill with a diameter of 5 mm, if the cornice will be installed on a load-bearing wall;
• a tile drill of the same diameter; for porcelain stoneware or glass tiles you will need a diamond drill;
• crosshead screwdriver;
• Marking pencil - the marker hardly comes off from wallpaper or tiles.

Tools for installing curtain rods in the bathroom

The curtain rod comes with installation instructions that must be followed during operation. The cornice mounting unit consists of:

• guide;
• decorative cup;
• bracket.

Screws and a locking screw are used for fastening.

5

Installation of a curtain rod in the bathroom, designed for hanging waterproof curtains, is carried out on the walls directly above the bathtub. The cornice is attached at a height of about 1.5 m, so that the lower edge of the drawn curtain is 15-20 cm below the edge of the bathtub, and there is a ventilation gap of at least 10 cm wide between the bathroom ceiling and the curtain.

To correctly mark the position of the rod relative to the edge of the bathtub, the curtain rod must be laid on it and the attachment points must be marked in the center of the pipe. Using a plumb line or laser level, it is necessary to reflect the resulting marks strictly vertically upward to the height of the cornice suspension (at least 1.5 m). These marks will determine the position of the center of the pipe when installing the rod.

Marking the position of the rod relative to the edge of the bathtub

The mounting holes for the brackets are marked by placing the end part of the bracket at the installation site according to preliminary markings. The fastening end element is installed in such a way that the screw fixing the cornice pipe in the bracket is positioned vertically. After carefully marking the mounting holes in the bathroom walls, drill blind holes for plastic inserts on both sides of the cornice.

In the event that the bathroom wall where the cornice is installed is lined tiles or porcelain stoneware, at the marking points for drilling the wall, it is necessary to scratch small crosses using a glass cutter. This is required so that the drill with a pobedit tip does not slide along the surface of the wall and does not move during operation.

The drilling depth and drill diameter are determined by the length and diameter of the plastic inserts and are usually 45 and 8 mm, respectively. After drilling, plastic inserts - dowels - are driven into the holes and the cornice brackets are installed on the walls using self-tapping screws. A supporting pipe is inserted into the brackets and secured with special locking screws.

Please note that before installing the pipe in the brackets, it is first necessary to put on decorative caps with silicone O-rings, as well as, if necessary, one-piece decorative rings for attaching curtains to the cornice. After this, the supporting pipe of the cornice is inserted into the support brackets, secured in them with locking screws, and the brackets are masked with decorative caps using silicone seals. The cornice is ready for use.

Comfort consists of many components, among which is the flawless functioning of properly selected equipment in all rooms, including the bathroom. Modern plumbing, a comfortable bath, exquisite wall and floor decoration, bright lighting - that's not all. Among the minor details, there are some that you simply cannot do without. For example, a curtain rod for a bathroom - it is on this that the curtain is held, protecting the floor and furnishings from splashing.

Let's talk about how to choose and install the cornice above the bathtub.

You should not buy the first product that catches your eye in a store, because its main characteristics depend on the shape and size of the bathtub, as well as on the cladding of the walls or ceiling - the place to which it will be attached. Therefore, the first thing to do is to use a tape measure to measure the distance from wall to wall (if the rod is fixed to the walls) or the width of the ceiling (if, accordingly, the cornice is a ceiling).

The simplest and most inexpensive type of direct models is plastic tube with stops at both ends. The kit usually includes a set of hooks of the same color as the bar itself

It is easiest with an ordinary standard rectangular bathtub 1.5 m or 1.7 m long. Three types of cornices are suitable for it: straight and curved (in the form of an arc) or corner if the bathtub is installed in the corner of a large room. It is more difficult with equipment of a non-standard configuration - with protrusions, uneven edges, elongated or rounded shapes.

It is difficult to select a finished product, but you can make it to order or try to make it yourself using a material suitable for the shape.

Please note that when installing ceiling types on suspended structures will be required additional devices rigidity, since plastic or drywall may not support the weight of the curtain

Imagination will come in handy if the bath is installed in the center of the room. Exist original accessories, which are fixed on the ceiling and have a different appearance - they are a round or rectangular frame.

So, all cornices can be divided into the following types:

• straight with fastenings– fixed on opposite walls using flanges;
• angular– tubular version in the shape of the letter L, in the middle part bent at an angle of 90º; a more complex configuration has the shape of the letter P;
• telescopic, the length of which, if necessary, can easily be changed from 1.3 m to 2 m using a “pipe-in-pipe” device;
• spring, the mechanism of which holds the weight of the bar and curtain thanks to a powerful spring;
• flexible, allowing you to create a suitable curtain for a bath of any configuration;
• non-standard, made to order.

Each category has individual characteristics installations. For example, to securely fasten corner curtain rods in a bathroom, additional ceiling fixation is required at the bends so that they do not sag.

A short tube-rod made of the same material as the product itself is most often used as a safety element. It is mounted on the ceiling in a place that does not interfere with the movement of the curtain

Does the quality of a device depend on the material?

What influences the material from which the cornice is made? First of all, on his performance characteristics and period of use. A metal tube will “live” much longer than a plastic one, since metal is wear-resistant and resistant to mechanical damage. This is important because the hooks on which the curtain is hung constantly move along the rod and scratch it.

U plastic product the only advantage is low cost, so it is easy to replace it with another made of similar material.

To make a plastic model last longer, when purchasing, pay attention to its strength, which directly depends on the diameter, wall thickness of the tube and elasticity (fragile material will deteriorate faster)

Metal models vary, but most are made from polished stainless steel, painted thin-walled steel or aluminum. The latter are good if there is a need to change the shape of the bar - aluminum bends easily.

The processed material does not rust, does not become moldy and lasts a long time. Sometimes design project requires the unity of all accessories, and then the cornice is made to order (from nickel-plated, brass or copper tube) so that it matches the plumbing details and other equipment.

Tubular metal curtain rods can last for decades, but don't forget about them weakness– brackets, which are the main fastenings to the wall, and regularly check their stability

Installation of curtain rods of various configurations

Almost all models are mounted in the same way - using flanges mounted on the walls. However, there are nuances that distinguish the installation of straight and angular, flexible and rigid, telescopic and solid products. If you wish, you can make a convenient device yourself from scrap materials.

Let's look at the features of installation of various types, but first a few words about the tool.

You will need marking material (pencil, tape measure, level, square), a construction knife, a hammer drill with 5 mm drills (for concrete or tiles), a screwdriver, fasteners (dowels, screws or screws can come with the cornice). When selecting fasteners, be sure to take into account the material of the walls and ceiling.

Installation of telescopic structure

Cheapness is not yet a reason to purchase this unreliable model for the bathroom if you have children in your family. The mechanism for fastening the telescopic device is such that it can easily support even a wet curtain, but it is unlikely to be able to support the weight small child if he slips and grabs the curtain.

A telescope rod is equipment that resembles a stand or small shelf that cannot withstand additional pressure.

The most inexpensive sliding cornice made of plastic costs 230-250 rubles, a telescopic rod with a metal guide pipe costs 550 rubles and more

If there is nothing to fear, and you still purchased a telescopic device, then without preliminary preparation you can install it right away. The only tool you will need is marking material; no drilling of walls is required. The sequence of actions is as follows:

• Determine the mounting location. Make sure that it is not too low, but maintain a distance from the ceiling (15-20 cm). You can check by looking at the curtain - its edge should fall freely into the bathtub, and not be located above its edge.
• Mark the mounting location with a pencil or washable marker. It is better to use a level and carefully ensure that the cornice is parallel to the edge of the bathtub.
• Unwrap the packaging and check how the mechanism functions.
• Read brief instructions, which is included with the product.
• Extend the cornice to the required length, adding a little more (0.5-1 cm).
• Use curtain rings or hooks if they are permanent.
• Install in a pre-marked place, check the reliability of installation.

As you can see, installation is easy and takes only a few minutes of time.

When choosing a particular model, make sure it matches other bathroom accessories. Silver, chrome and nickel plated products are popular, as they go well with plumbing equipment

Features of installing a rod with flanges

Prepare a pencil with a tape measure to accurately mark the mounting location, a hammer drill and a screwdriver. As fastening materials we will use self-tapping screws and dowels, which are supplied in the kit (if not available, you need to take care of purchasing them in advance). Sometimes the screws are tightened with a special hexagon that comes with them. On the wall we mark two points for attaching the flanges. The distance between them is the length of the rod.

We calculate the height above the edge of the bathtub in the following way: subtract 20 cm from the length of the curtain (the length of the curtain will be lowered into the bathtub).

We take the first metal flange and apply it with the center to the marked place. They usually have a round shape and 3 holes for screws

Place dots in the holes with a pencil to indicate drilling locations. We remove the flange and use a hammer drill to make three holes at the marked points. We insert the dowels, reattach the flange and screw it with self-tapping screws. We repeat the same thing on the other side.

Before installing the rod, we put reflectors on it - metal round strips that cover the working part of the flange. We insert both ends of the tube into the holders and fix them with special clamping bolts

We move the reflectors tightly to the wall - the work is finished. Usually, in the instructions, in addition to the order of work, there are some explanations for the installation of products various types. Please read them carefully before proceeding with installation. For example, the manufacturer often pays attention to such a minor nuance as the location of the clamping screw on the rod (usually with the head up).

At first glance, it’s a trifle, but in fact, only this position will ensure stability and avoid sagging.

The advantage of models secured with flanges or brackets is obvious: in addition to the plastic curtain, they can easily hold a towel or robe thrown over the crossbar

How to fix a corner cornice?

Corner structures are usually called structures that have one or more corners, since curtains usually cover a bathtub installed in the corner of the room. They differ only in that they are longer and, accordingly, require more reliable fastenings.

If the rod is made of steel and has sufficient weight, the bend points - the corners - may sag, so they should be fixed. To do this, they use the hanging method - they install another fastening ring on the rod and use it to “hang” the corner to the ceiling.

Many models of flexible aluminum curtain rods are attached in a similar way: first, brackets with holders are fixed to the wall, then a metal strip is inserted into them, which must be given the required shape in advance

Some corner cornices have an arc shape, that is, there are no corners at all, but the supporting pipe is smoothly curved. Such devices are most suitable for asymmetrically shaped bathtubs located in a corner or niche.

It is possible to attach the pipe without additional insurance, but over time the middle of the structure may sag due to the weight of the curtain and its constant use

Installing a corner curtain rod in a bathroom is no different from installing a straight rod. In the same way, the locations are marked, the brackets are fixed and the pipe is inserted into them.

Cornice design in the bathroom interior

If you've decided to add a privacy curtain to your bathroom, why not use it and the curtain rod that holds it to add some style to the room? But keep in mind that sometimes, due to the design features as a whole, an installation that differs from the usual one is necessary.

In the bathroom with original decorative tiles, a cornice with traditional silver plating was installed - apparently, this design matches plumbing equipment and other accessories

Sometimes the color and texture of the curtains look very bright and distract attention from the holders, but this does not mean that the curtain rod should be cheap or discreet.

The silver color with which the curtain rod is coated usually has an additional shade characteristic - “satin”. It has a discreet, soft shine

In a luxurious bathroom in the Art Deco style, everything should be magnificent, even the curtain rod: do not be surprised if you find exclusive designer options on sale, made using crystal or semi-precious stones.

The arched chrome-plated curtain holder harmonizes with surrounding objects: sanitary ware, towel holders, lamp and chandelier parts, toiletries

Come up with original solution Anyone can, for example, like the author of this magnificent bathroom in white.

Bathroom curtains with eyelets are an unusual, but surprisingly harmonious picture. Typically, such curtains decorate windows, but they are also quite appropriate in the bathroom.

A classic interior in an unexpected design – and the cornice plays an important role here.

The bathtub is located in a niche, and the curtains cover not only the bathtub itself, but also the entire niche. In this case, you can choose any cornice suitable for windows, but a flat one, pressed against the arch, is most consistent with the style

As a final touch, a video about installing the rod yourself:

Arranging a shower room is a troublesome process, involving solving the most unexpected issues. How to hang a curtain in the bathroom correctly is not an easy question. The curtain must fit harmoniously into the interior and be attached securely. Few people will like it if the cornice unexpectedly leaves its place of permanent deployment.

• prevents splashes of water on the floor and furnishings;
• zones the space, clearly separating the place where water procedures are taken;
• contributes to the creation pleasant microclimate while taking a shower;
• is integral part decor.

The latter quality is less often remembered. The solution of practical problems comes to the fore, which is quite justified from an operational point of view. A comfortable curtain fits harmoniously into the overall design concept and can act as a buffer between the ceiling, walls, and floor. It all depends on the idea of ​​the project.

Shower curtain - simple, elegant

The fastening of the curtain is important - safety depends on the reliability of the rod's installation. During water procedures, the free edge of the curtain is lowered from the side of the inner side. This is done to prevent water spillage. Then the canvas experiences increased load, additional resistance is created by water flows beating on the surface. These factors must be taken into account when choosing a fastening method.

How to secure a curtain rod

IN construction stores You can purchase two types of holders:

• “spacer” – the cornice is held by an internal spring in a telescopic tube;
• rod with special fastenings.

Cornice “spacer”.

Installation of the first type is simple. Structurally, the rod is a telescopic tube with a spring inside.

Installation is done as follows:

• remove the protective caps along the edges of the rod;
• extend the telescopic tube until both ends of the cornice rest against opposite walls;
• determine the height;
• put on caps;
• string rings, thread the curtain through the eyelets;
• fix the bar at the desired height;
• check the level.

If an error occurs when increasing the length, the problem is simply solved: remove part of the tube with the spring to the end, insert a larger diameter pipe from the opposite side.

How to attach a curtain rod to brackets

The method described above is suitable for a standard situation when, according to the conditions of the problem, an ordinary bath is given. But the curtain is also necessary for corner bath, it is used to separate the shower area.

When there is no tray, the drain is located on the floor or low above its level - a small “pedestal”, the curtain performs a double function - it replaces the door, and acts as part of the overall decor. It is enough to move it to one edge or move it apart if it consists of two parts, the space will visually increase.

They always try to fit the curtain into the existing interior or develop a project taking this element into account

With this layout, a semicircular cornice is used, which cannot be secured with spacers. Its installation is carried out as follows:

• determine the height - try on the curtain so as not to make a mistake;
• display a horizontal level to prevent distortions;
• the wall is drilled using a concrete drill of the required diameter;
• drive in a dowel;
• treat the gaps with putty and allow to dry;
• install fasteners;
• hang a cornice or first string a curtain if the model has grommets.

To harmonize the interior, select cornices, rings, clothespins or eyelets of the same color - white enamel, stylized as silver, bronze. This way the corner will look like a single whole.

Selecting a shower area is an effective interior solution

Ceiling cornice and its installation

Recently they have been using ceiling mounting– comfortable, ergonomic, the curtain covers the space from ceiling to floor. Installation of such a cornice is simple. We insert the screws from the fittings kit into the special sockets and attach the cornice directly to the ceiling. This design is good for tall or built-in shower heads, or if you don't want to drill into the tile.

The ceiling cornice will cover the entire shower space right up to the ceiling.

What materials are used for shower curtains?

Water resistance is a key criterion when choosing curtains. Fortunately, stuffy polyethylene or oilcloth products, ineffective and inconvenient to use, have sunk into oblivion. Today in the production of curtains they use:

• PVC (budget option);
• polyester (more expensive, but better quality);
• vinyl.
• fabric curtains with impregnation.

Polyester is considered the optimal material. A variety of prints look great on it, it is pleasant to the touch, but requires careful care. Dried streaks of water spoil the visual impression when getting acquainted with the original solution.

Kind with healthy. Ideas for prints - very different

Can buy ready product– the market is flooded with canvases with various images, interesting plot drawings, abstractions. If we're talking about about a stylish room, then printing is done on polyester. And then simple curtain will become an exclusive copy.

Fabrics with moisture-resistant impregnation are used for expensive interiors. These are classic, Venetian or rich oriental areas for water treatments and hygiene. This curtain can be washed; its wear and tear is not as great as it might seem at first glance.

Gorgeous fabric with a natural print.

Types of curtain rods for the bathroom: photo ideas

The variety of fastenings does not end with the options - telescopic with brackets. There are many modifications, since the design can be the most unexpected.

For example, a ring cornice looks stylish and neatly zones the shower area.

Cornice - ring.

There are interesting, convenient flexible curtain rods for showers. They are given complex shapes when required.

Flexible curtain rod for the bathroom.