Step-by-step instructions for assembling a barrel sauna with your own hands, practical tips. Barrel sauna: advantages, materials, types, instructions for self-assembly How to make a round sauna with your own hands

What are the disadvantages of a barrel bath? Reviews from owners indicate the following inconveniences:

• When using a steam room in winter, the bathhouse must be insulated. For insulation, it is better to use rolled heat-saving materials so that it is possible to bring the internal temperature to the required level. They increase labor costs and overall cost.
• The largest mini-sauna will not fit more than 3 people. It is not suitable for a large company.

• With additional installation of water supply and sewerage cold winter Ice plugs often form there, and the pipes themselves freeze heavily.
• But given that Finnish barrel saunas are planned as economical and a budget option, these shortcomings can be classified as trifles, which in comparison with the advantages of the baby steam room are simply insignificant.

Organization of construction

To create a cozy mini-steam room we will need:

• Boards. Profiled sheet piles with dimensions of 90 mm (width) and 45 mm (thickness). You should not use wider boards - difficulties may arise during further laying and joining along the circumference. We will also need edged boards sizes 200 mm (width) and 50 mm (thickness) and blocks for windows And doors .

Advice! The most successful would be a barrel sauna made of cedar, spruce, larches, pine trees. Deciduous trees can also be used, but reserved for the bathhouse frame coniferous wood, and give the deciduous leaves under interior decoration(they will not tar, will not burn the skin, will make the air fragrant and the steam light).

• Metal hoops.

• Steam room oven. Choice ovens- the most responsible thing. After all, the quality and comfort of steam depends on it. For a mini-sauna, you can choose classic sauna stoves (brick, metal, or combined). For wetter steam, wood-burning stoves are used, for lighter steam, electric stoves (special electric stoves for saunas with a power of 4 or 6 kW, they are mobile and do not require additional installation of a chimney).

Craftsmen can make a stove themselves:

• From sheet iron
• Iron barrel stove

• Heater with sheet metal body
• Remote, in which the heating tank is placed outside

Follow safety precautions! All wooden structures insulate from heating elements sheet iron, and make the pipe outlet using insulating basalt mats.

Advice! To make the stove work more efficiently and create more healthy steam, trim the area around it with sheets of aluminum or stainless steel. These metals release steam into the air more intensely than others.

Construction of a barrel bath

How to build a barrel sauna, where to start? From choosing a site for the base of the steam room. There is no need for a foundation here. The mini-sauna can be placed on any flat surface that prevents contact between soil and wood.

Choose:

• Plot lined paving slabs .
• A place filled with gravel or filled with concrete.
• An area where two road slabs are laid.

• Base. The base of the barrel bath is made of boards with a thickness of 5-6 mm. First, a recess is prepared on each (subsequent boards will be installed in them). The easiest way to cut out the notches is with thick patterns. Calculate so that the remaining part is at least 10 cm wide. The base boards are fixed wooden formwork. The parts are fastened together with screws, screw them in the corners metal corners for better reliability.

Advice! Before assembly, treat all wooden parts with protective impregnation. Once fully assembled, this will be very difficult to do. Pre-sort wood material, boards with knots and cracks are best used for finishing the inside of the bathhouse.

• Partitions. Parts for the end walls are attached to the base bars. During the assembly process, do not forget about the doorway and windows. The size of the future barrel bath is chosen from the future number of visitors to the steam room. At the same time, keep in mind that very small rooms will not be entirely comfortable, and large ones will require a lot of time for good heating.

Today, barrel baths are a very popular product. Beautiful view The barrel-shaped bathhouses are mesmerizing to look at. The idea to create a barrel-shaped bathhouse came to our country from neighboring Finland. Barrel saunas have been popular there for many years. As of today Russian market a large number of offers of this product, for every taste and budget. The cost of such a bath depends, of course, on its size and the materials from which it is made. The length of the sauna barrels ranges from two to seven meters, and the average diameter is two meters. A short bathhouse can accommodate only the steam room itself, while a large one can accommodate all the amenities of a regular stationary bathhouse: a shower room, a relaxation room, and a toilet. For mobility of the bathhouse, it is installed on a light car trailer and is very often used for commercial purposes. All these additional options lead to an increase in the price of the bath many times over.

Let’s analyze and calculate the cost of a barrel bath if you make it yourself. Let’s take, for example, a barrel four meters long and two meters in diameter, in several designs. Drawings of such a bathhouse can be easily found on the Internet.

Bathhouse made of barrel boards 44 mm thick without the use of insulation

The simplest and most inexpensive option for making a barrel sauna with your own hands would be a sauna from the so-called barrel board without additional insulation. The barrel board is so called because it has a semicircular groove and tenon of the same shape and is used for the production large barrels. Let's calculate required amount boards. To do this, let's calculate the circumference of the barrel, which is equal to 2πR. The diameter of the barrel is two meters, which means 2*3.14=6.28 meters. Boards can be used of any width, but most often their size is 15 cm, and taking into account the fact that part of it will fit into the groove, we will take 12.5 cm as the working width. And so, we calculate the quantity necessary boards 6280/125=50.24 pcs. Required number of boards: 50 pcs. There will be a small gap equal to 0.24*125=30 mm. It will close when the outer boards are tied together, since the diameter of the bathhouse will decrease slightly. The reduction in diameter is due to the fact that a small groove is cut into the outer boards for a tighter fit to the vertical walls and partitions. Boards are usually sold 6 meters long, which means this volume of boards (50 pieces) is enough for two walls and one partition. It must be remembered that the board must be well dried. Searching through advertisements on the Internet, we find pine board humidity 15% costing 11,500 rubles per cubic meter. There are 22 boards in a cube, which means we need 50/22 = 2.27 m3. Multiply the cubes by money and get 26105 rubles for the entire bathhouse. A barrel sauna made of cedar will cost more, because 1 m3 of cedar board already costs about 35,000 rubles, and larch about 40,000 rubles. Metal hoops for tying boards must be used from of stainless steel. For this bath it will be enough to use three hoops. Their cost will be about 6000 rubles You can cover the bathhouse with flexible bitumen shingles or polycarbonate. Let's calculate the roof area: 6.28/2=3.14* 4=12.56 m2. Price bitumen shingles varies greatly depending on the manufacturer. Let's take average price 400 rubles per m2 and we get 5024 ruble Two doors, the entrance door and the one to the steam room, will cost 7000 rubles For the rest room it is necessary to make benches from any wood, and for a pair of shelves from wood hardwood(linden). Benches for the rest room 500 rubles, for steam room 3000 rubles Wooden grates on the floor 1000 rubles In a barrel bath, it will be enough to install two sockets and two lamps, which must be connected through a separate machine. Electrical equipment 1000 rubles And finally, the most basic thing without which a bathhouse is not a bathhouse is a stove. Wood-burning stoves are usually used in barrel baths, not high power, since due to the lack of nodes in the steam room, the bath warms up quickly. A Russian stove with a chimney and a tank for heating water will cost approximately 20000 rubles The place where the stove will stand must be finished with non-flammable material, such as asbestos sheets. Their purchase will cost 1000 rubles The outside of the wood must be protected from moisture and treated with a special impregnation. Let's add more 3000 rubles To ensure stability of the sauna structure, the barrels are placed on special stands with a semicircular cutout. For these purposes, you can use a 50*150 mm board. 1000 rubles We’ll set aside more for fastenings and unaccounted expenses. 5000 rubles

Today, a barrel sauna, four meters long in the basic configuration, is offered for 170-205 thousand rubles. Let's calculate the cost of a barrel sauna made independently with your own hands. We get 79629 rubles for an uninsulated bathhouse made of pine and 132974 rubles for an uninsulated cedar bathhouse.

Bathhouse made of barrel boards insulated with foil insulation

When insulating a barrel bath, in addition to the insulation, you also need to purchase lining, which will have to be used to finish the walls. Let's calculate the required amount of insulation. The standard width of foil insulation is 600 mm or 1200 mm. The circumference is 6.28 m, the length of the bath is 6 meters, therefore, we need 6000/1200 = 5 segments 6.28 m long. 6.28 * 5 = 31.4 m of insulation. Insulation of the partitions is also necessary and will amount to 3.14 * 3 = 9.42 m2, that is, approximately another 8 m of insulation with a width of 1200 mm. As a result, we get about 40 meters of insulation costing 2500 rubles To seal the joints of the insulation, use foil tape ( 350 R).

Calculation of the required amount of lining

The working width of the standard lining is 110 mm, the circumference of the bath is 6.28 m, which means that 6280/110 = 57 pieces 2 meters long are needed for the steam room and 57 pieces for the relaxation room. Most often used for finishing a steam room wooden lining from linden. It will cost 15000 rubles The lining for the rest room will cost 5200 rubles

Bottom line: a DIY barrel sauna made from a barrel board with foil insulation will cost 102679 R. from pine and 156024 from cedar.

Frame bath

A barrel sauna can be built not only from barrel boards, but also frame technology. Going to wooden frame it is sheathed on the inside with clapboard, on the outside with boards, and insulation is placed inside the wall. For the frame you will only need a few 100*50 mm boards. A board for external walls will cost about 8000 R. and you will need about 50 pieces. When covering a bathhouse with regular boards, they are laid slightly overlapped on top of each other, so we take the working width as 130 mm. For interior decoration The lining will take the same amount as for the previously calculated options for making barrel baths. To insulate walls, insulation from mineral wool with foil and will require about 40 m2 ( 6000 rubles). The cost of the frame can be attributed to unaccounted and additional costs.

Bottom line: a do-it-yourself barrel sauna using frame technology will cost 61524

Usually on suburban area In addition to the house, there is also a bathhouse, because this is good opportunity cleanse your body after working in the garden beds and simply relax your soul. Most often, a standard construction is arranged. However, sometimes a barrel sauna is built with your own hands. The construction of such a facility is not particularly challenging task. The most important thing is to use quality materials and don't deviate from technology.

Create a sauna in your countryside

Traditional sizes

The most compact round-shaped structures have a length of 2 m. The design of such a building assumes the presence of only 2 rooms. You must undress at the entrance. It will be more convenient if the building has a porch with a canopy. The usual weight of a building does not exceed 1.5 tons. In addition to compact structures, there are also larger barrel baths - Their length is 6 m.

Internal structure of a three-room barrel bath:

1. Locker room. There is a seating area, clothes hangers and a table.
2. Washing room. It houses shower equipment, as well as a container with water.
3. Steam room. It is equipped with comfortable benches. If a sauna is installed in a round structure, then the washing room can also act as a relaxation room. The usual length of each room in such a structure does not exceed 2 m.

The classic version of the building has a length ranging from 2 to 7 m. This is confirmed by many drawings of a barrel bath created by professionals. These dimensions are often recorded in them. The diameter of the structure does not exceed 2 m. Square-like objects and oval-type structures may have slightly different dimensions: 4 × 4 m and 3 × 6 m.

In this video we will look at how a barrel sauna is assembled:

In any structure, regardless of size, you can easily accommodate on sun loungers. Their standard width is 500 mm. The two-meter building has only one room inside. The 4 m long buildings contain 2 rooms - usually a locker room and a steam room. In most designs, the ceiling height is more than 2 m.

Common forms

The classic form of such structures is a circle. Less often you can find square or oval versions of such buildings. Sometimes they may look like a rectangle with rounded corners.

There are also varieties of objects that have a semicircular top or rectangular bottom. The entrance, regardless of its shape, can be located:

1. Front.
2. From the side.

It can be designed in the form of a visor or stylized as a gazebo. Double-rounded structures in most cases have a rectangular outline. Vertical structures They look like round buildings. They are oval or rectangular objects with corners.

Main types

After making a decision to build a barrel sauna on the site, one arises serious problem: which version of the round design to choose. All varieties can be divided into three main groups:

1. Finnish sauna. Its features - heat and dry steam. It is preferable that during paired procedures, the person in the bath should have a font or wooden bucket with cold water nearby.
2. Russian steam room. The steam room creates moist, thick steam, and brooms are used for the procedures. Typically such a structure has two rooms: washing department and a steam room.
3. Japanese ofuro. She looks like regular bath made of wood. It is heated thanks to a stove built into the structure.

Each type of round bath has nuances of design and construction. You should focus on them when choosing suitable design. For supporters of traditional procedures, it is best to choose the option of building a building with a traditional “heater”.

Advantages and disadvantages

The main thing that attracts many people to round baths is their unusual shape. Such a structure does not go unnoticed and causes surprise in any person who sees such a structure for the first time. Rounded shape provides improved performance. But in order for a high-quality do-it-yourself barrel sauna to appear on the site, the drawings should be studied before work begins, and they will also help in drawing up an individual project.

The main advantages of sauna barrels are:

1. No need for a serious reason. To install a barrel sauna, you just need to prepare an area on which you can lay an even covering.
2. Small dimensions allowing such a structure to be placed even in a small area.

Making a structure with your own hands is not big problem, since there will be no difficulties when assembling or disassembling the structure. The main thing is to focus on the drawing when performing all manipulations. When conducting installation work you can refuse to use special equipment and do the work yourself using solar cells.

The building has light weight and is quite mobile, so if necessary, it can be easily moved to another place.

There are no sharp corners in the structure, so everything free space used as efficiently as possible. In addition, the rounded shape of the structure ensures rapid heating of the internal space.

You can easily install an electric stove in the building or place the usual wood-burning equipment. Here everything will largely depend on what is required - dry or wet steam.

With all their advantages, such designs also have disadvantages. In the fall, it is necessary to carry out work to insulate the facility. This is a mandatory event if the structure will be used during the cold season. To perform the procedure, roll insulators are used.

Wood selection

To get a high-quality structure with a round shape, you need to take the task of its construction seriously. One of the important points is the competent choice of wood. This is very important, since such buildings do not have additional internal lining.

Experienced experts do not recommend using coniferous wood, as they contain a large amount of resinous substances, which, when heated, are released into large quantities, which may cause skin burns. In addition, the resin negatively affects the respiratory system.

The only exception to coniferous species is cedar. The construction of a structure from this rock is the most suitable option. In such a bath you can not only cleanse your body, but also improve your health. In addition, cedar wood is highly resistant to moisture and is impervious to bacteria. It has a beautiful pattern that creates a special atmosphere in the barrel bath.

The most commonly used hardwood tree is linden. When carrying out bath procedures, there is pleasant aroma and a special atmosphere that has a healing effect on the human body.

Construction instructions

When the owner of the site has decided what material to build the object from, it is necessary to purchase wood in the right quantity and treat it with antiseptic compounds. After this, it is thoroughly dried, after which you can proceed to construction. First, you should study the drawings. The dimensions of the barrel bath can be different, so you should choose the specific dimensions of the object, focusing on personal needs.

Laying the foundation

First you need to lay the beams. They will act as a foundation, providing support for the structure above the surface.

To create the base, it is best to use beams with the following dimensions: thickness - 4 cm; width - 35 cm. In total you will need 2-4 pieces. Here everything largely depends on how long the structure will be. It is necessary to cut recesses into them, into which the boards of the lower part of the structure will then be laid and secured.

After this, the elements are placed on the prepared surface. They should be located at an equal distance from each other. In this case, the interval between the elements should be such that the first supports the wall with the doorway, and the last is under the rear wall of the object.

After laying all the beams, it is necessary to carry out manipulations to fasten them. Upon completion of this operation, a rigid frame should be formed. Thanks to it, it will be possible to prevent the base elements from moving to the side after installing the main structure on it.

Wall construction

The next step is to make the front and rear walls of the barrel. They should turn out smooth, and their surface should be absolutely flat, without cracks or other defects. It is necessary to apply markings on the walls for windows and doors. The bars are fixed depending on the placement option. Boards will be sewn on them, which will form side walls barrels. The fixation of the bars should occur across the structure.

It is necessary to assemble the frame, and then sew the prepared lumber onto it. When finished it should be a square. You should calculate its middle, and then outline a circle along the surface, and then cut out a circle along the contour. The marking of both walls is done in the same way.

After this, in each circle you should make markings for one or more windows, and also outline a place for the doorway. Next, holes are cut out. If the need arises, the resulting openings are strengthened with bars.

Marking boards, windows and doors

Then actions are carried out aimed at preparing and marking the boards with which the side walls of the building will be built. Special grooves should be created in the places where the casing adjoins the front and rear walls. Their width should match the thickness of the boards in the walls and have a depth of 8-10 mm. It is into these recesses that the bottoms will then have to be inserted.

In this design, doors and windows must be closed hermetically to prevent heated air from escaping. But not everyone can make such products, so the best solution will place an order for the production of windows and glass door. Correct installation structures will ensure the tightness of the structure.

Build process

The assembly of the structure begins directly with the placement of support beams on the prepared site. They should be located at some slope. Communications through which used water will be discharged should be installed in advance. Later you will need to connect the low tide from inside the bath.

In the cutout of each beam, you need to mark the center to which you want to attach the first board. Next, on each side it is necessary to sequentially secure the remaining ones until the base is completely filled. In this case, attention should be paid to ensure that the grooves located on the beams form a single contour.

This operation allows you to sheathe the floor of a future building. The next step is to fix the front and back wall baths in grooves. After completing this manipulation, they should hold fairly tightly and not require additional support. Already at this stage the shape of the structure being built will be visible.

When the installation of the front and rear structural elements is completed, you can move on to covering the sides. The boards are fixed to the side walls. They are laid out and then fixed parallel to both sides of the barrel.

Making a barrel sauna with your own hands is original version for the dacha. An important point is compliance with construction technology, as well as right choice material. Best used for construction work linden The use of such wood allows you to obtain reliable homemade building with a healing atmosphere inside.

A bathhouse in the form of a barrel is a rather rare occurrence, but it looks very decorative and adorns any area. You can build such a structure yourself, since there should not be any special difficulties during the work process. Do-it-yourself barrel sauna is quite possible for any person who knows how to handle construction tools. The advantage of such a structure is that you can build it yourself without an assistant. This the best option for those who would like to have a bathhouse, but the area of ​​the plot does not allow the construction of a large-scale structure.

Advantages and disadvantages

Installation and assembly

After careful processing wooden elements You can start assembling the bathhouse itself. From the tools you need to prepare ordinary carpentry tools (hammer, plane, sander, chisel) and a tape measure for measurements. From additional materials You will need nails and screws, metal tape to further strengthen the structure, and caulk to seal the seams. The latter is necessary if the boards do not have a groove.

Then you need to decide on the place where the bathhouse will be located. Experts advise installing the structure in an elevated place, and in no case in a lowland. After this, you need to dig a pit no more than 50 cm deep. The dimensions of the pit correspond to the size of the bathhouse plus 50 cm. A mixture of gravel and crushed stone should be poured into the bottom of the pit and compacted well.

The next stage is installation of the frame. Support boards installed every 150 cm, so their number depends on the length of the structure. Boards are stuffed onto it, and all mounting recesses should be located on the same line. Then comes the turn of the partitions, which are installed strictly perpendicular to the flooring made of sand and crushed stone.

Then the boards for the walls are nailed. A special adjustment rail is installed between the first and last elements, which makes it possible to adjust the gap if the wood shrinks or swells. Ready design need to be tightly tied with tape. After this, you need to drill holes to drain the water ( minimal amount – 3).

The final stage is the installation of flooring, flooring and doors. When installing the boiler, you need to be extremely careful and finish the surface near it with fire-resistant material. The oven should have a low power according to the volume of the steam room. The roof can be built on rafters or simply covered with waterproofing and soft material for the roof. The inside of the bath can be treated with linseed oil. The floor should have a slight slope, 1 cm of slope per 1 meter is enough.

Having learned in more detail how to make a barrel sauna, and having looked step by step photos construction, there is no doubt about the success of the planned business. If you follow the instructions, everything will work out in the best possible way.

The barrel sauna is a truly unique invention of its kind, which organically combines the healing properties of an ordinary sauna, useful qualities natural wood, mobility and maximum convenience prefabricated design.

If assembled correctly, the barrel-shaped sauna turns out to be very reliable and as durable as possible. This design can be attached to a car without any problems and taken to any desired location.

The sauna has a small volume and warms up in the shortest possible time. Despite modest size, such a steam room can be equipped with everyone necessary equipment for a complete and most comfortable stay. At the same time, you can handle the assembly of the barrel on your own.

Mobility

The sauna can be transported or even rolled (moved) manually, with the help of several friends. The weight of a barrel bath is on average 1.5 tons, so transporting the structure over short distances can be handled manually, and almost any machine can pull such a weight.

For comparison, just one brick stove for an ordinary bath can weigh much more than 1500 kg.

High warm-up speed

IN warm weather in such a bath it will be very hot in half an hour.

Compactness

The average area occupied by a bathhouse in the form of a barrel does not exceed 10 m2, therefore similar design Ideal for placement in small areas.

Original design

The bathhouse has an attractive and very pleasant appearance. Psychologists around the world claim that contemplation rounded shapes helps a person relax, and this is very useful when visiting a bathhouse.

Economy

You will spend much less money on assembling a barrel-shaped bathhouse compared to building a capital steam room of the same area.

Also among the advantages of the design under consideration is the absence of the need to arrange a foundation. For permanent installation It will be enough to prepare a pair of strong beams, rigidly and securely connected to each other, and install the barrel on them.

Extreme ease of maintenance and operation

Fewer corners - less dirt in hard to reach places, smaller area– less hassle with cleaning.

Ergonomics

Even with a modest area inside such a bathhouse you can equip a shower, dressing room and everything necessary equipment. On average, a barrel sauna can accommodate 4-8 people.

Thanks to high-quality thermal insulation and multi-layered barrels, the effect of a thermos is created inside such a bath, which can significantly reduce fuel and electricity costs.

The averaged data of numerous calculations indicate that thanks to only one round shape 20-30% less money will be spent on operating a barrel sauna than on maintaining an ordinary steam room.

What materials should be used to make a barrel bath?

With assembly and further exploitation barrels there will be no problems or difficulties if you initially pay due attention to the selection of suitable materials.

To assemble the bathhouse, use only high-quality wood that has been dried and correctly sawn into pieces of suitable size. Choose the type of wood according to your preferences and material opportunities. It is recommended to give preference to oak, linden, pine, spruce, and cedar.

The optimal width of the boards is 9 cm, thickness is 4-5 cm. It is advisable that the wooden boards initially have a tongue-and-groove joint - this will allow you to assemble the structure with the least amount of time and effort.

But even if such tenons and grooves are not available initially, make exactly the mentioned connection yourself. It allows you to obtain durable, reliable, stable and strong prefabricated systems that, if necessary, can be disassembled and reassembled many times without deterioration operational properties designs.

Additionally, you need to purchase or make several strong steel hoops. These products will provide additional fixation of the barrel around the entire perimeter.

All the required equipment can be purchased without any problems in specialized stores that sell various products for baths and saunas.

The required number of metal hoops and wooden planks calculate individually according to the size of your future steam room. Typically, the length of such a barrel varies from 250 to 500 cm. Additionally, such a structure can be equipped with various extensions.

A barrel-shaped bathhouse, if it is planned to be used throughout the year, needs high-quality thermal insulation. Traditionally, mineral wool materials are used for insulation.

The top of such a steam room can be designed at your discretion. Here, focus on personal preferences. The main thing is that the roof reliably protects the bathhouse from adverse atmospheric phenomena and ensured effective and timely removal of moisture.

Guide to assembling a barrel sauna

Ready-made kits for barrel assembly are available for sale. Prefabricated elements come in a variety of sizes, so you can choose and buy without any problems suitable material. This will save effort and time.

Also everyone necessary elements designs can be made with your own hands. The barrel is assembled in the following sequence.

First step. Make the base of the steam room. Saw a board measuring 5x20 cm into pieces according to the diameter of the barrel. Place supports in increments of up to 150 cm. Determine the specific number of supports individually in accordance with the length of the structure.

To connect, cut grooves in the upper ends of the boards. The shape of such grooves should follow the circumference of the barrel. Determine the dimensions of the grooves so that the remaining uncut part of the board has a width of 100 mm or more.

Second step. Collect the required quantity internal partitions, as well as the end walls of the future bathhouse. Use a tongue and groove board for assembly. Connect wooden boards using cross bars. Fix the cross bars themselves in such a way that they do not interfere with the installation of windows and doors in the future.

IN ready-made kits the necessary end elements are sold assembled, which is very convenient.

Third step. Cut the tongue and groove board to fit the length of the barrel. Sand the ends of the elements, and then treat the boards with antiseptic impregnation.

Fourth step. Install the supports with the same spacing. Lay the bottom of a barrel bath on them from several wooden boards connected using the tongue-and-groove method. Once a sector of the circle is formed, the size of which would be sufficient for the installation of the end walls, place these walls in the appropriate places and continue laying out the boards until the circle is completed.

Fifth step. Secure the assembled barrel using metal hoops.

Sixth step. Install windows and doors.

Seventh step. Arrange the roof. Reliable option- roof on rafters. To create rafters, use a beam with a cross-section of 5 cm. Such a roof can be covered with corrugated sheets, metal tiles or other similar material. Finish coating attach to pre-assembled board sheathing.

If the bathhouse will be visited only in warm weather, you can refuse insulation. The design of the steam room is such that it can warm up sufficiently in about half an hour and retain heat for 2-3 hours, and this time is enough for most visitors to the steam room.

Finally, all that remains is to process external surfaces walls with a fire retardant, and internal ones with an antiseptic, then you can move on to interior design steam rooms.

Interior arrangement of a mobile bathhouse

Inside, such a bath can be equipped like any other steam room. It even has enough space for a small dressing room and a compact shower stall.

When choosing a stove, focus on modern electric models. Such units do not take up much space and do not require a chimney. For a barrel sauna, an electric heater with a power of 6 kW will be more than enough. However, such ovens are capable of producing exclusively dry steam.

If you are not satisfied with this, please give preference small metal wood stove . Select the specific model and dimensions of the structure based on the volume of the steam room. Don't forget about the measures fire safety: wooden structures must be protected from all heating elements using sheets non-combustible materials, and the passage of the smoke exhaust pipe is insulated with fire-resistant insulation.

When arranging the floor, be sure to slope in the direction of the drain. For 1 m of surface length there should be a slope of approximately 1 degree.

For interior decoration of floors, walls and benches It is best to use larch. Such wood will not burn the skin. Place benches along the wall opposite to the stove. You can also install benches at the side walls.

Lay electrical wires in fireproof insulation. Sockets, switches, lamps - all this must have an appropriate protection class.

It is very easy to take care of such a bath– it is enough to regularly ventilate the steam room and at least annually treat the walls with high-quality protective agents.

Thus, in just a couple of days you can independently assemble a barrel sauna that will long years delight you and your guests with your light steam. Follow the instructions and everything will definitely work out.

Good luck!