Painting relief plaster. Painting decorative plaster: necessary materials and application methods. Paint application technique

Decorative plaster, sold in the form of a dry mixture, has a white or grey colour. It can be colored immediately when mixed with water. To do this, use tinting aqueous solutions or pastes, which are added directly to the container with plaster. The amount of color depends on the desired color saturation. Addition occurs with constant stirring. This is the easiest way to paint decorative plaster, used to obtain the base color of the walls.

Tinting has its advantages over painting the surface in that later scratches and chips of the plaster will be less noticeable.

Which colors to choose

Painting of decorative plaster completes renovation work and allows you to create a unique individual design. In addition, coating with paint creates additional protective layer.

For decorating facades plastering such as “bark beetle”, “fur coat”, “American” is often chosen. This textured plaster is often painted in one color. You can choose acrylic, silicate or silicone paint. These types are moisture resistant, suitable for outdoor use, have a wide color scheme. They also have good vapor permeability, unlike oil and alkyd paints.

Varnish — finishing coat, which strengthens the surface of the plaster, protects it from mechanical damage, moisture, and most importantly, improves the appearance of the walls being decorated. For interior decoration, water-soluble acrylic varnishes are used, for the facade - with organic solvents.

Before application, the varnish is mixed, and pigment (color) or glitter is added if desired. The walls are covered in one layer using a soft foam roller.

Types of varnish: matte, glossy, with crackle effect (cracks).

Glaze or glaze— translucent finishing coat for paint. Apply to a smooth or textured surface. Suitable for outdoor and interior work. The composition is applied at a temperature not lower than +10˚С. Cover with a sponge or a special mitten. The entire surface is visually divided into squares and the composition is applied in stages with strokes, shading the joints. The glaze composition makes a beautiful color transition.

There is a separate article on this topic - Varnish for decorative plaster. It talks about self-cooking and application technique.

Video

The video tutorial shows how to paint the decor. plaster with water-based emulsion with gold pigment using a brush and sponge.

On next video- painting textured walls in two colors. The base color is white, the relief highlighting is gold and bronze. A small foam roller is used.

Another way to highlight the texture is to coat it with colored wax.

Photo

To conclude our review, here are a few photos of decorative plaster after painting.

Painting decorative plaster is done quite often. WITH practical point vision this will protect the plane from external environment. And from an aesthetic point of view, an excellent solution appearance.

Today we will tell you how to paint decorative plaster correctly and take care of everything. Also many the right moments You can watch the video in this article and instructions for this work will be given below.

The main advantages of painting

Decorative plasters (see: Decorating walls with decorative plaster: creating a beautiful interior) and paints have a number of advantages as finishing materials.

Let's look at them in more detail:

• Rich color palette, which allows you to implement any design solutions;
• Simplicity and flexibility of application– there is no discomfort when working with this material, and thanks to its plasticity, there will be no problems with application;
• Environmental friendliness- this factor in present time extremely important. Everyone pays attention to what surrounds them, especially if we are talking about a children's room;
• Durability– long service life helps save future costs.

Types of paints

There are several types of paints and decorative plasters. The dye acts as a protective layer. And before deciding how to paint decorative plaster, you need to choose a dye, because they are quite different in composition and have different characteristics.

Acrylic

Paint for decorative plaster of this type based on acrylic - this is quite popular and good material. It is used for painting rooms with high humidity and living rooms.

Such compositions have the following characteristics in their arsenal:

• They respond well to evaporation; it is for this reason that during their service life they can be wiped with wet wipes without fear, and the aesthetic appearance will not deteriorate;
• Manufacturers for tinting produce huge assortment various colors and shades, thanks to this quality coloring composition can be matched to any interior;
• After the composition is applied to the plaster, the walls will acquire a matte surface;
• The material, made on the basis of acrylic, is affordable. It can be called the golden mean between price, production, modern technologies and quality.

There are some nuances that simply cannot be ignored.

Attention: Experts do not recommend buying this type of paint for those rooms where there is a risk of liquid getting on the ceiling and walls. This includes bathrooms, as well as rooms where the car will be washed. If contact with water cannot be avoided, then latex-based compositions are best suited.

Latex paints

The point of working with this type of dye is to dry the material, which becomes thin, but at the same time quite durable.

• Thanks to these characteristics, you can safely carry out wet cleaning, because compositions made on its basis are not afraid of liquid ingress.
• The coating is absorbed into the base and lasts quite a long time. Moreover, you can apply it yourself. This will make the finishing price significantly lower.
• The composition of such paint can create both matte and glossy surface, which is perfect for painting walls that have been plastered.
• If decorative plaster is applied to the surface, then a latex composition (see Latex paint: how to work with it) is ideal. This is all due to the fact that no other material will highlight the texture and volume of a putty pattern of this type.
• This material will be an excellent solution for coatings in unheated rooms. It is also effective for use on external surfaces.

But this material also has its disadvantages:

• If you want to remove the paint, it will be quite difficult to do.

Attention: If this material is frozen, then there is no need to make a purchase. It loses its properties. Therefore, refrain from purchasing from winter time on open trays.

Water-based paint based on PVA

This composition is sufficient convenient option, if you want to stick to the “cheap and cheerful” style, and the appearance will be quite attractive. Despite the fact that the water emulsion does not have a rich range of colors, it is simply created for rooms that do not require color saturation and a special design.

Do not forget that water-emulsion material is not used in rooms with high humidity, as well as in places where it is possible to wipe it with wet wipes.

Labor-intensive work on applying decorative plaster deserves to be appreciated as a design element when creating original interior. This opportunity is provided by covering the façade with a monolithic coating applied in the most various colors and shades that are offered on the paint materials market today. In addition to its aesthetic role, the coating plays the role of a protective layer that protects from external influences of temperature changes, precipitation, solar radiation. You can also increase the degree of protection of a plastered façade by skillfully choosing a color - light colors will prevent overheating of the walls, which, firstly, will protect against premature destruction, and secondly, will allow you to save money when using the building's air conditioning system.

It is possible to give the facade an original color without painting the material after it has been applied to the facade. To do this, a so-called tint (concentrated powder or liquid) is added to the wet plaster mass before applying it to the walls, gradually bringing its color to the required shade. It is worth remembering that when drying the color becomes lighter by half a tone or even a tone.

In this case you strip the façade additional protection from external precipitation, but reduce the amount of work by eliminating the procedure for covering plastered walls.

Staining technique

It should be noted that not every plaster mass must be tinted before being applied to the surface of the walls. This plaster must dry on the facade. Let's find out how to cover a typical decorative or other material initially white. For this purpose, special facade or interior paints are used.

Work on covering the applied plaster relief on the walls should begin only after it has completely dried. This may take from 8 to 48 hours depending on the composition plaster mixture.

Some mixtures are cement-based and therefore prone to crumbling or partial peeling. To strengthen it, it is treated with a special colorless primer. It is also necessary to leave time for the primer to dry completely, on top of which the plaster relief can be painted.

Secrets of painting art

You can make any painting easier, including learning how to work with decorative plaster with minimal losses, if you know some painting secrets. First of all, you need to acquire the main devices. If the coating will be carried out with a roller, then you will definitely need a tray that will allow you to economically dispense the material on the roller and make it easier uniform application. The tray configuration makes it easy to remove excess from the roller.

If the work is carried out indoors, then it is necessary to provide for the use of a covering protective material that covers the floor, furniture, window sills, windows, door jambs, etc. When covering a facade, protection will only be required for the front door, windows, and it is also worth protecting the path along the wall from splashes.

Any painting is carried out with chaotic movements. This is required in order to avoid sharp color transitions and not create areas of the treated surface that differ from each other.

Coating methods

Let's look at several coating methods below.

One pass painting

The simplest method for decorative plaster is one-pass coating. To do this, use a long-haired roller or a regular brush to work through the entire surface, including protrusions and recesses. We get the “base” shade.

Dry brush technique

A more complex effect or the so-called “relief coloring” can be obtained if, on top of a darker “base” layer that has dried for at least 2 hours, a material of a different shade is applied to the relief protrusions, usually lighter by half a tone or tone. To use this technique, you will need a brush or roller with short bristles, on which you apply minimal amount material (the so-called “dry brush” technique). The technique of relief poering allows you to give the surface greater “volume”.

“Volume” elements of the plaster relief can be tinted using decorative metallics - coatings such as bronze, silver, gold. This type of paint is applied both using the “dry brush” method and using a mitten by shading the top layer. Using a mitten makes it easier to achieve smooth color transitions. It must be remembered that metallics do not tolerate excesses, which always indicate a lack of taste. The purpose of bronze or gold is to just slightly shade the base color.

"Blur"

In addition to the “dry brush” method, a “wash” type coating is used. If the first method helps to emphasize the bulges on the surface, then the second highlights the depressions. The surface looks more advantageous if, when applied with a “dry brush,” paints of a lighter tone are used compared to the background. In the case of “blurring”, on the contrary – darker tones.

Coating a surface using the “washing” method is characterized by very large physical and time costs, because its essence is as follows: a layer of a darker tone is applied to the main background of the surface, which is left to dry for a short time, and then this upper layer It is mercilessly wiped off the bulges with a damp cloth. As a result, the dark layer remains only in the depressions, thereby creating a three-dimensional pattern. To apply the background layer under the wash, a good quality material is used that is resistant to washing the wall surface. For the filler, on the contrary, would be better suited cheaper non-moisture resistant paint, which will be easier to wash off from the surface.

Advantages and disadvantages of various methods

The results of both methods are difficult to evaluate by simple comparison, because it is only a matter of personal taste or the request of the customer. One thing can be said - it is much more difficult and longer to blur the coating than to apply it with a dry brush.

The more textured surface and the deep relief of the plaster, the greater the material consumption will be.

Coating can be carried out not only in one pass, but also in several stages: two layers of background color and finishing with a “dry brush” or “wash”. At the same time, we should not forget that excess material can distort the expression of the texture.

The final “accord” of any coloring can be a protective layer of varnish, which is applied over the layer of material after it has completely dried. Any varnish will do water based(for example, Tikkurila, Alpina). Before use, it must be diluted in water in a 1:1 ratio, which will greatly facilitate its penetration into the cavities of the material. The finished mixture is applied with a wrung-out wide brush in two or even three passes with breaks for drying (the varnish, as you know, dries very quickly). The mixture should be applied immediately to the entire surface of the wall, avoiding smudges. The consumption of the varnish mixture will be approximately 2.5 liters of varnish per 50 square meters. meters of surface.

The varnish will add decorative plaster exquisite shine, will refine the colors, make it easier to care for the surface, and protect not only the material, but the plaster design relief itself from the influence of external destructive factors.

Video

Home -> Construction country houses, cottages, construction of baths – Reef Company -> Useful information

Painting decorative plaster: video instructions on how to paint it yourself in two colors, photo

Not all types of decorative plaster are tinted before application. Therefore, there is often a need to paint the plastered surface. If you approach this problem creatively, you can achieve various interesting effects and make the surface of the plaster even more attractive.

Painted decorative plaster

Below we will look at the basic rules by which decorative plaster is painted, and also get acquainted with some design techniques interior decoration, which allow you to make even the most ordinary decorative plaster effective and aesthetically pleasing.

Surface preparation

Before you start painting, you need to prepare the surface. If plastered walls have been left unpainted for some time, you need to wipe them with a damp cloth to remove dust.

Some types of coatings (usually cement-based) are prone to crumbling. In this case, the surface must be treated with a deep penetration transparent primer, which strengthens the finish.

In the photo - deep penetration primer

The priming process is as follows:

1. the container with the primer must be thoroughly shaken or its contents mixed;
2. then the soil must be poured into the roller tray;
3. then the paint roller must be moistened in the priming liquid, lightly squeezed and treated with it on the plastered surface;
4. if any hard to reach places, which are difficult to get to with a roller, you should use a paint brush;
5. After the soil has dried, the procedure must be repeated.

Painting

Below we consider three options for painting decorative plaster:

Below we will take a closer look at all these color options.

Paint roller with tray

Tools

You need to start work by preparing the following tools:

• long-haired paint roller;
• roller tray;
• hard paint brush;
• damp cloth;
• fine grit sandpaper.

Concerning paint and varnish material, then polymeric water-dispersion compositions are used for these purposes. In this case, it is necessary to pay attention to the scope of their application.

For exterior work, façade paint should be used. Decorative plaster or wallpaper for painting should always be painted exclusively with interior paint, i.e. intended for interior work.

Plain painting of plaster

Plain painting

First of all, let's look at how to do a single-color painting with your own hands. this work carried out in the following sequence:

1. You need to start work by preparing the paint and varnish material. To do this, the composition should be thoroughly mixed. If the coating is white, then to give it a certain color it is necessary to perform tinting, i.e. add required quantity color scheme

To determine the proportions of the latter, you should first tint a small amount of paint, and then add the color to the main part of the paint material. In order for the color to be uniform, the composition after tinting must be thoroughly stirred;

Tinting paint

1. Then the liquid must be poured into the roller tray. It should be noted that the tray is in in this case an almost necessary tool, as it allows you to dispense a set of paint with a roller and press the tool on a special platform.
2. After this, you need to dip the roller into the tray and treat the plastered surface with it. The composition should lie in an even layer, without drips. At the same time, it is necessary to ensure that all the indentations of the texture are painted. As necessary, the roller should be dipped into the tray and squeezed out.

1. A few hours later the procedure is repeated again.

Note!

Popular techniques for decorative wall painting

You can paint decorative plaster only after it has completely dried. This may take from 8 to 48 hours, depending on the type of coating.

This completes the work.

Dry brush painting

Dry brush effect

So, we figured out the monochromatic coloring. Now let’s look at how to paint decorative plaster in two colors with a “dry brush” effect.

To do this you need to do the following:

1. first of all, the plaster must be painted in the main color according to the scheme described above;
2. after this you need to wait until the coating dries;
3. then you should prepare the paint by adding a little less color to it so that it is a tone or two lighter than the background;
4. then apply the second layer paint coating using a short-haired brush or roller. Painting tool should take up a minimum amount of paint, which will allow you to paint only the protrusions of the texture.

Advice! You can tint the protrusions not only with lighter paint than the background, but also with all kinds of metallics, for example, bronze paint, silver, etc.

Blurring a painted surface

Blur method

To implement this method, it is advisable to use different paint coatings:

• for the background it is better to use expensive waterproof paint;
• For the second layer, it is more advisable to use a composition intended for dry rooms. As a rule, the price of such coatings is much lower.

Instructions for painting using this method look like this:

1. first of all, you should apply a base layer of moisture-resistant paintwork, which should be lighter than the tint;
2. after the surface has dried, a tinting layer of paint and varnish material is applied, which should completely cover the surface, including the recesses;
3. After the second layer has dried, the protrusions should be rubbed with a hard, damp sponge. If the second layer is also moisture-resistant, you can use sandpaper soaked in water. The only thing is that the work must be done carefully so as not to erase the first layer.

As a result, the dark layer should remain only in the depressions.

Blur example

It should be noted that this method is more labor-intensive and time-consuming. However, in this way you can achieve a very interesting result.

These are, perhaps, all the original and at the same time quite simple ways of painting a plastered surface.

Conclusion

Although decorative plaster looks attractive in itself, painting can significantly improve its decorative qualities. Two-layer volumetric painting looks especially beautiful. As we found out, achieving this effect on your own is not at all difficult.

See the video in this article for more information. If after reading the material you have any questions, leave them in the comments and we will be happy to answer them.

How and with what to paint decorative plaster?

What paint is best to use for painting decorative plaster? What tools to use? How to prepare the surface? What are the main stages of work?

The simplest and most logical way to paint decorative plaster, in my opinion, is to add the required color (color) to the pre-mixed plaster and then apply it to the walls of the color you need.

The second way, perhaps the most common, of painting plaster is to apply paint to an already finished surface. In this case, it is better to use water-based paints (acrylic, silicate). It is important to follow some basic rules for the durability of the painted surface:

• painting should be done only after completely dry decorative plaster (after approximately 48 hours);
• before painting, you can cover the working surface with acrylic primer;

It is also worth paying due attention to the materials with which you are going to apply paint to decorative plaster:

• you can use a wide brush, roller or, for example, a special mitten;
• Using a brush or roller, as a rule, uniform painting is carried out work surface;
• You can also use a rubber sponge or mitten to create interesting drawing, the texture of the plastered surface, by rubbing paint;
• You can also make decorative plaster voluminous by combining the sequence of surface painting:

A lot depends on the type and texture of decorative plaster, because the main thing is to know what effect you want to achieve when painting. As for paints, they can be water-based or organic-based, it all depends on your desire and wallet.

The choice of tools depends on the relief of the decorative plaster and on the desired result; painting is usually done with a roller or brush, but in special cases sponges, grouting cloths, spatulas with a comb or other working tools are used.

Preparing the surface of decorative plaster requires treatment with a colorless primer for better adhesion of the paint to the plaster; after the primer has dried, you can begin painting. If you want to get a well-painted surface, apply the paint with a brush, filling all the reliefs, and then roll it with a roller. If you want to have a non-uniformly painted surface, start painting with a roller and then dry with a sponge.

Types of painting decorative plaster depend on its texture and design that you want to have on the walls of your house or apartment, and the paint can be anything, from water-based to alkyd-based enamel. Alkyd enamel for interior work Alpina Mattlatex works well on decorative plaster; after painting the walls can be washed, so it is suitable for finishing bathrooms, kitchens and balconies.

It's very easy to paint! For this they use water-based paint, long-haired paint rollers, brushes and how industrial version spray.

Preparation involves removing debris and dust from the surface; you can wipe it off with a broom or rag, or you can blow it off with a vacuum cleaner or spray bottle.

When painting, hard-to-reach places are first painted: corners, elements of decorative designs, small places, as well as places around doors, windows and other objects.

If you paint with a monochromatic shade, then in principle the movements do not matter, but if you purchased expensive iridescent or tinted/structured paint, then you must paint with movements in one direction!

Don’t rush to cover it up right away, it’s better to go over it with a thin layer, let it dry, look at the gaps and sagging in the color, paint again with a thin layer, let it dry and finish the job with another control layer for problematic areas.

The question is not specified, there are a lot of decorative plasters, and accordingly, they are all painted differently. For example, pebble plaster such as “lamb” and “bark beetle” can be painted with a roller or spray.

Painting decorative plaster in two colors: features of the work

For painting, façade acrylic and silicone paints are suitable; if indoors, interior paints and varnishes are suitable. If you paint the “bark beetle” in two layers with different paints, you can get an interesting texture.

Here is the "Manna" type plaster

By painting the plaster with a brush you can also get an excellent pattern.

More questions on your topic:

leave a comment

Builder's Dictionary:: Repair questions:: Calculators:: Special equipment:: Miscellaneous

2006 - 2017 © user agreement:: contact with the site administration [email protected]

Users claim that painting decorative plaster

two colors has many advantages over other types of room decoration.

This method is perfect both for finishing the facade of a private house and for an apartment balcony.

Compared with wallpaper, decorative plaster has a number of advantages.

For example, restoration occurs more easily and without investing much effort.

The resistance to moisture of plaster is much stronger than that of wallpaper. Since it is applied without seams, the appearance finished wall looks much more natural.

In addition, large temperature changes are absolutely not scary. this material. You can safely spill various liquids onto such a coating without fear of ruining the coating.

The materials used in the manufacture of plaster are completely environmentally friendly. Scratches will not spoil the appearance of the finish, so pets will not in any way damage the renovation of the apartment.

When cleaning such wall coverings, you can use soap solutions and other detergents.

This design can be done at home, which makes it possible to use your imagination to the fullest extent.

Types of plaster and features of use

In principle, painting a decorative composition in two colors is not such a complicated process, the main thing is to know all its main stages. Main types of plaster:

• Venetian;
• Decorative “bark beetle”;
• Textured;
• Structural;
• Antique;
• Mineral;
• Graphite;
• Decorative flock covering.

Firstly, in order to set the background color, you just need to add color to the solution. And that's all, nothing pre-painting not required.

Immediately after applying the plaster layer, a color is applied, which will be the background. At the same time, a huge advantage is that performing these works does not require special skills and absolutely anyone can do them.

The advantage of this type of painting is that you can invent and create images for design, relying only on your imagination and desires. It is very easy to choose the color of the composition, focusing on general style apartments or premises. A wall with two colors as a base always looks fashionable and beautiful.

This type of wall treatment is also carried out by a number of protective functions. Firstly, it protects the surface from sun rays, secondly, from moisture. If you use light colors as background colors, then in the heat the walls will not overheat.

There is ready-made colored plaster on sale, or white plaster intended for coloring. Any novice master will find a more suitable option for himself.

Painting features

First you need to clean the walls to apply a layer of plaster. If the walls are uneven after cleaning, they must be leveled using special tools.

Prepare the mixture for application to the surface of the walls. Choosing a method for adding color. You need to decide whether to add color to the plaster or buy ready mixture the desired shade.

Experts recommend starting to paint decorative plaster in two colors from the most inconspicuous wall. If you make a mistake on such a wall, it will be much easier to correct it.

If a layer of material without color has already been applied, you can add color to the acrylic primer and apply it directly on top. The effect will be the same as when applying colored plaster.

Tools required for work:

• Rollers for painting walls with a background color;
• Brushes for applying a design in a second color through a stencil;
• Paint tray;
• Stencil with a pattern for the second color.

The plaster can dry for 48 hours, so all subsequent work should be carried out only after this time.

Painting decorative plaster: application methods

All surfaces that are not being painted should be covered so as not to get dirty.

After opening a new can of paint, it must be thoroughly mixed. During the entire process, the paint must be stirred periodically.

It is recommended to cover the wall with the background color twice for better and more uniform coloring. For the best painting effect, you need to apply the first layer of paint with a brush, and the second with a structured roller.

If silver or gold plating is used as a second color, the main thing is not to overdo it. An excessive number of such colors can only spoil the appearance of the room and make it vulgar.

If the task is to make the painted surface matte, then for this purpose beeswax is used, which is used to cover the wall over the paint. Such a solution will always give the owners of an apartment or house the opportunity to fulfill their fantasy in home design.

Properly selected paint will protect the walls from excess moisture and external influences that adversely affect the structure of the building. The second color in painting will always look advantageous and unconventional.

Video about how double painting is done:

This solution will help give the room individuality and find your own interior style that will be unique to it. Good luck with your creative solutions!

In most cases, this question can be answered quite simply - it is a matter of taste. But if you can’t decide, then there are a number of objective differences between painting and finishing with decorative plaster. These are characteristics, duration of operation and cost of work. We invite you to figure out together what will be more profitable in the final stage?

Differences between painting and decorative plaster on the wall

Thanks to the variety of finishes, the differences between painting the wall and decorative plaster can be either very deep or completely small. IN general view, painting the walls is called the application of a decorative paint layer on a prepared base, and decorative plaster is the application of colored improved plaster compositions.

As a rule, the advantage of decorative plaster is that it is less demanding on the quality of preparation of the base on which it is applied. Indeed, textured plaster does not require surface leveling before application. But if we are talking about other types, for example, Venetian plaster, then it will require the same volume preparatory work as well as for painting.

The ability to create a variety of textures is another advantage of plaster. Painting walls can fulfill this function to a very limited extent.

Decorative plaster is also considered a longer-lasting finishing element. Some types of plaster, especially those made using natural components, are quite easily destroyed if the wall is touched with something sharp. But on average, the service life of this coating is 15-20 years.

Painted walls it has to be renewed much more often - once every 3-6 years, and here everything also depends on the quality of the chosen paint and the mode of operation. Painted walls are easily dirty, wiped off, and the paint layer can also be damaged. However, it may be easier to repair the damage caused than in the case of decorative plaster.

The difference in the price of painting walls and applying decorative plaster - is it that big?

Another difference between decorative plaster and painting is the price. The production of high-quality panels, wall and ceiling coverings from decorative plaster will require significant financial investments. Some savings can be achieved by eliminating surface preparation, but not in all cases.

The cost advantage can be achieved due to the fact that it is a longer lasting coating compared to painting. While the decorative plaster will still look good, the paint layer will have to be renewed twice or three times. Fortunately, this won't require high costs, because most types of paints can be applied without removing the previous coating (up to 2-4 times).

Thus, difference in price of decorative plaster and wall painting is practically leveled out due to long term operation. And yet, shell out money for high quality decorative plaster will have to be done immediately, and the costs of painting the walls are distributed over time.

How to paint decorative plaster with your own hands

Therefore, most often they prefer to apply decorative plaster to walls in the form of panels, or to decorate areas of the surface with it, combining this finishing option with other materials.

This option allows you to choose a finish to suit every taste and budget, but requires high skill and good artistic taste from the performer.

Extensive experience in wall decoration various types coatings allows me to offer you a quality guarantee even in cases where non-standard solutions. Prices for painting walls and installing decorative plaster are given in the price list, and they are quite affordable for your budget. Don't deny yourself the pleasure of getting exactly the renovation you want!

Users claim that

two colors has many advantages over other types of room decoration.

This method is perfect both for finishing the facade of a private house and for an apartment balcony.

Compared with wallpaper, decorative plaster has a number of advantages.

For example, restoration occurs more easily and without investing much effort. The resistance to moisture of plaster is much stronger than that of wallpaper. Since it is applied without seams, the appearance of the finished wall looks much more natural.

About the disadvantages of the bark beetle

Minus number 1. Difficult to paint.

Minus number 2.

Similar articles

www.ristroy.ru

do it yourself with photos

Many have already appreciated the benefits of using decorative plaster, which can perfectly decorate not only the facade, but also interior walls rooms. Exists big choice this material, and painting decorative plaster in two colors creates a unique and original design interior

Painting features

Before you begin work, you should familiarize yourself with the properties and characteristics of the material, as well as the rules technological process for a high-quality and durable finish.

Compliance with the rules for choosing materials and correctly performed work will ensure not only a beautiful appearance of the walls, but will also save money on remodeling.

Double painting with bark beetle has a number of features, the observance of which will ultimately allow you to achieve a high-quality result. To perform such work it is not necessary great experience, you just need to familiarize yourself with the technology in detail.

The main disadvantages of the bark beetle

The use of this finishing option for interior design premises has some difficulties, which include:

• Quite a labor-intensive surface treatment process;
• An attractive appearance is achieved only with properly performed work, which is quite difficult to achieve;
• In most cases it is recommended to contact professional craftsmen, in order to obtain a high-quality finish.

However, despite all the difficulties in performing plastering in this way, there are also positive sides. For example, walls can be painted multiple times, with recesses and depressions painted in one tone, and the rest of the surface in another, which looks quite original.

The main advantages of double plastering

Painting with decorative plaster in two colors actually has many advantages.

Among which are the following:

• This method of wall decoration allows you to create an original and unique design, and with a skillful choice of colors you can create various design solutions;
• Protection from moisture and direct sunlight;
• When choosing light colors the walls will not overheat in summer.

Rules for choosing paint

In order to choose the right decorative bark beetle plaster, it is still recommended to consult with a specialist, because further wall finishing depends on the quality of the material.

There are two types of such paint: white and colored. The use of white paint requires additional processing, for example, painting in a certain color.

Colored plaster is offered in wide range color palette and is sold in a ready-made form, which just needs to be applied to the surface.

Paint application technology

After choosing the tone of the plaster, they begin to prepare the walls, namely, thoroughly clean them of all kinds of dirt, old coating and dust. If necessary, the surfaces should be leveled and any existing defects and imperfections should be removed.

Direct painting of walls can be done in several ways. For example, you can apply plaster to the prepared surface or add another shade to the pre-prepared mixture. You can also combine colors on the walls, thus creating beautiful style in the interior, emphasizing individuality.

To plaster a room, you will need a certain set of devices, which includes a special container with plates and spikes, brushes and rollers.

Furniture and floors should be coated before plastering. protective film to prevent plaster from getting on them.

Wall painting options

There is more than one way to paint walls with decorative plaster.

Which include:

• Painting in one layer. The simplest option for wall decoration, which does not require professional skills and uses one type of material;
• Dry brush option. This method involves applying a starting layer of a dark color, onto which, after drying, more is applied light shade. This allows you to create relief and volumetric design, and to complete the work you will need a brush with short bristles;
• Blur. This painting method allows you to visually highlight depressions on surfaces, for which darker tones are used. This finishing option is considered the most labor-intensive compared to other methods and requires significant material costs, as well as more time for plastering.

When painting with decorative plaster in two colors, varnish can be used as a final protective layer. It is applied after the bark beetle has completely dried, and for work it is recommended to purchase a water-based varnish.

In order for it to better penetrate deep into the plaster, it is diluted by half with water. The varnish is applied in several passes after the previous layer has dried. This varnish coating not only additionally protects the walls, but also gives them shine, attractiveness and originality of finish.

Watch the video:

It is necessary to apply the varnish to the entire wall, while avoiding smudges, so that in the end there are no unsightly marks left on the coating. And for applying it, it is better to use a wide brush, which is wrung out well before applying the varnish to the wall.

domunit.ru

Painting decorative plaster in two colors

Painting decorative plaster

• Roller with brush tray

Painting plaster with a roller

A wonderful thing, this decorative bark beetle plaster! Its convenience is that the cement base makes it possible to use it in places such as the facades of buildings and private houses. External environment She tolerates it well. And if we take into account the apartment, then balconies and loggias, whether glazed or open, represent an excellent opportunity for using this type of finishing. Decorative bark beetle plaster is easy to work with; application does not require special skills, as is necessary when working, for example, with Venetian decorative plaster. But there are downsides. For example, painting decorative bark beetle plaster in two colors causes difficulty for many. Let's look at options and ways to solve this problem.

This actually presents a certain difficulty, since the texture is such that the finished surface has numerous indentations, similar to indentations in wood eaten by a bark beetle. Painting them is the biggest difficulty.

You need to take a thicker roller and soak it well with paint. The paint will flow into the depressions, then flow out from there, and accumulate unsightly on the surface. You'll have to collect it with a roller. And after all, in these recesses there will still be unpainted areas that will have to be touched up with a brush. In general, you suffer and think that it would be better not to paint.

After painting it one color, you will really understand that it was better not to paint it, since a bark beetle painted in one tone only looks good if it is done perfectly. And if you have only once or twice tried to make decorative bark beetle plaster with your own hands, then you are still far from ideal.

But there is a way to fix everything. Paint the surface a second time with a different color. But with such a condition that only the plane is painted, and the stripes, furrows and potholes remain in their original color. This already looks quite original. Therefore, if this happens, then go ahead. Paint a different tone over the already painted one.

But there is an opportunity to avoid the hassle of painting the inside of the texture. The method is quite simple. It consists in adding color to plaster mortar when mixing it. Then, when the decorative layer is made, it will already have its original specific color.

Perhaps you have an idea how to ensure that the color does not differ from batch to batch? This is actually quite difficult. But in fact it is not necessary. An approximate tone for each batch will be enough. At first you will get a difference in the palette of different batches.

By the way, in the first photo Bottom part It hasn't dried yet, so it has stains.

But after you paint the entire plane in the second tone, this difference in the recesses is completely invisible. Judge for yourself.

Decorative bark beetle plaster with the addition of collier and the solution painted in a second tone.

The whole difficulty of painting decorative plaster in this case will be so that the paint, on the contrary, does not flow into the furrows of the bark beetle. To do this, take a roller with short pile, for example velor, and, pressing lightly, roll it along the plane of the texture. The result will look great.

What to do if you have already applied decorative bark beetle plaster, but did not add color to the solution? Is it possible to paint it without having to go through the hassle of painting the inside of the texture? There is a second method, invented by enterprising painters. We take a primer, latex or acrylic, and add color directly to it. And then we saturate the entire finished surface with this tinted primer. The primer is liquid and flows quite easily into all pores. And when dry it forms an indelible layer. At first you may be horrified, because who knows what will happen.

Type of decorative plaster after applying a primer with color added to it

But after painting the plane in the second tone, you will not be disappointed. After all, the result will be such that you won’t be able to tell what you used to paint it for the first time, paint or impregnated with tinted primer.

Most likely, these small subtleties will help you make your decorative bark beetle plaster look impressive.

And one more piece of advice. Many who begin this type of work for the first time immediately choose the most noticeable and largest wall. Don't make a mistake. Start with the most inconspicuous one. And when it comes to that big one, you will already have some experience.

Fight against rats and mice: To get rid of rats or mice you need to make balls from special dough and put them in their habitats. Melt two parts of fat, add seven parts of flour and three parts of barium carbonate.

Remedy against bee stings: If you are stung by a bee, the first thing to do is pull out the sting. Then, to prevent the bitten area from swelling, you need to wipe it several times with a weak solution of ordinary blue.

vizada.ru

Painting decorative plaster in two colors

How to paint a bark beetle in two different colors

In this article:

Many owners of private houses have already appreciated the advantages of decorative facade plaster. With the help of such finishing you can give your home an attractive appearance and protect its walls from any external negative impacts. Among important advantages such decorative cladding It is often possible to paint plaster in two colors.

It is quite possible to paint the facade with two colors yourself, however, such work requires some knowledge and skills that can be gleaned from the Internet.

Bark beetle facing

Painting facade plaster in two colors is the final stage finishing works, before the start of which the owner needs to solve other important tasks.

To better understand what bark beetle plaster is, the owner should understand all the features of such cladding and take into account all the pros and cons.

Disadvantages of plaster

First of all, it is necessary to understand what difficulties a homeowner who decides to carry out the bark beetle finishing of the facade will have to face on their own. Z

Real people - specialists in the field of construction and finishing of residential buildings, usually identify two disadvantages of such finishing:

Despite the disadvantages described, with the help of the Bark Beetle you can really give your home an attractive appearance, originality, and even uniqueness. Painting in two colors is perfect solution for all owners conducting installation work on one's own. The easiest way is to paint obvious facade irregularities with one color, and the rest of the area with another. In this case, you can get a very original design.

When decorating a façade with Bark Beetle, a color can be added to the plaster; in this case, immediately after application to the wall, the cladding will already have one desired color, and therefore the owner will only have to paint the unevenness with another enamel.

Benefits of coloring

Despite the difficulties in working with bark beetle, this cladding option external walls the building enjoys deserved popularity among the owners of the most different buildings. This is, of course, due to the large number of advantages provided by the plaster and painting itself.

Among the main advantages of colored bark beetle are:

How to choose paint

When purchasing decorative facade plaster, the owner can immediately select finishing material white or other color. In the first case, the plaster will definitely need painting, in the second - at the request of the house owner.

As for the choice of color, the owner will have to decide on his own; the owner can order services professional designers who will select the most matching tones, which will be applied to the plaster.

Dyeing technology

When facade paints chosen, you need to understand what painting in two colors means and how the paint is applied. First of all, before installing decorative plaster, you should properly prepare the surface of the facade, that is, clean the walls, prepare the solution and repair all defects.

In addition, before installing the Bark Beetle, you should choose whether the color will be added to the plaster before installation, or whether the plaster will be painted after installation of the coating on the facade.

The option of painting a surface already lined with plaster is given to the owner the broadest opportunities. For such processing you can use the most different colors, can be painted in two colors, can be used various technologies and the methods by which paint is applied to the surface, etc.

In any case, before painting you need to purchase not only the selected paint, but also the tools necessary for such finishing work. To paint installed plaster, you will need brushes, a roller, paint mixing equipment and a spiked plate.

The easiest way to paint bark beetles is to paint in one pass, but in this case only one type of paint is applied. You will not be able to achieve any original appearance for your home using this method.

Want to more information on this topic? Check out these articles:

Painting decorative plaster is the final stage finishing. Decorative plaster can be white or gray, with the exception of that which is purchased ready-made with the addition of colored pigment to the plaster mixture. White or gray plaster intended for painting.

Painting decorative plaster

Which paints to choose and how to correctly calculate consumption

Both façade and interior paints are used for painting decorative plaster. They can be based on organic solvents, which are silicate, acrylic and silicone compounds, or water-based.

If the plaster is to be painted, then before starting work, first of all, it is necessary to determine the area of ​​the working surface. To do this, measure the perimeter of the walls and then multiply it by the height. It is also necessary to measure window and door openings in order to then subtract their area. Now, having chosen the paint, you can calculate its approximate consumption.

The surface covered with decorative plaster usually has a clearly defined relief. The higher the surface relief and the smaller the elements, the greater the paint consumption.

It is better to take for calculation the maximum value indicated on the paint can. By multiplying this number by the square footage of the room, double the resulting value, since painting is done in two stages. Then, add another 15-20% to the resulting displacement.

Plastering and painting walls, choosing tools:

For painting you will need the following tools:

• Roller with brush tray
• Nylon cord (on a bucket of paint to prevent it from splashing)
• A small plate with spikes along the edge of the tray.

To paint plastered surfaces, you can use a wide brush, roller or special mitten.

Painting decorative plaster #8211 technology and methods

How to paint decorative plaster?

Start any painting work plaster can be applied only after the layer of plaster for painting has completely dried. This may require you to wait 8 to 48 hours. Drying times depend on the composition of the plaster mixture, humidity level and ambient temperature.

If there is a tendency for plaster particles to peel off or fall off, to strengthen the surface, it is advisable to treat the plastered wall for painting using a colorless primer.

When the primer has dried, you can begin painting over the decorative plaster.

Before starting work, you need to protect furniture, floors, windows and other surfaces from splashes and drops of paint. For this it is recommended to use a special plastic film, which can be purchased at any hardware or hardware store. When painting facades, such precautions will not be required, but windows and the path near the wall should still be covered. Before use, the selected paint must be stirred well. Paint is applied to the walls using a roller or brush. When painting walls with a brush, the paint is applied in both horizontal and vertical strokes.

Apply the paint first with horizontal strokes, then blend them with vertical strokes. To obtain an even color, it is recommended to shake it periodically with the same brush with which the paint is applied, so that the paint composition remains uniform in color and thickness during the process, and sediment does not form at the bottom. The roller painting technique is also simple. First, dip the roller into the paint and roll it along the spiked plate along the edge of the tray to remove excess paint.

Paint is applied to the wall from top to bottom, and then from bottom to top. The strips of paint should be applied so that they lay on top of each other, approximately 4–5 cm. As the paint is consumed, the pressure on the roller increases so that the paint lays down in an even layer. You can paint the wall in one or two steps. In both cases, the paint should be thoroughly shaded.

Painting plaster with a roller

You can get a perfectly evenly painted surface if you first use a brush when applying, shade it well, and then #8220 roll #8221 the surface with a roller. The most in a simple way painting decorative plaster is painting #8220 in one pass #8221, that is, complete painting of the plastered surface, including all recesses and protrusions in one tone. You can also try using a combination of several different colors. To do this, use a roller to first apply a light #8211 base coat of paint to the surface. After it has completely dried, the protruding areas of the relief are covered with paint of a darker shade. This technique of adding additional volume to a plastered surface is called #8220 dry brush method #8221.

Sometimes metallics (bronze, gold, silver) are used instead of dark paint. They are applied using a dry brush or a special mitten.

To soften color contrasts on a surface with a finer texture, you can additionally rub the paint using a mitten or a rubber sponge. The same technique is used to enhance the effect of deep relief or, if you want to give decorative coating antique look #8220 #8221 . Protruding details of the relief can be emphasized by applying bronze, gold or silver paint.

Using a short pile roller you can achieve interesting effect when painting the surface of plaster for painting type #8220 bark beetle #8221. Remaining unpainted, the grooves form a contrasting #8220 bark beetle #8221 pattern on the wall. This difference can be enhanced, or, conversely, muted, by first adding a coloring pigment to the plaster, and then painting the walls the same color, but with a different shade.

How to paint decorative plaster with a non-uniform texture?

Painting textured plaster suggests some features. If the plastered surface of the wall combines textured and smooth areas #8211, painting should begin with the textured ones. Smooth elements can be painted only after the embossed ones have completely dried. If you do not take this point into account, then when applying paint to the entire surface of the wall, without taking into account its texture, loose particles plaster surface may peel off, sticking to smooth areas. After drying, when reapplying a layer of paint, strictly following this sequence is no longer required.

Dried and painted decorative plaster can additionally be coated with beeswax in order to give a matte shine to the surface.

Painting decorative plaster video material:

Coloring the bark beetle in two colors

A wonderful thing, this decorative bark beetle plaster! Its convenience is that the cement base makes it possible to use it in places such as the facades of buildings and private houses. It tolerates the external environment well. And if we take into account the apartment, then balconies and loggias, whether glazed or open, represent an excellent opportunity for using this type of finishing. Decorative bark beetle plaster is easy to work with; application does not require special skills, as is necessary when working, for example, with Venetian decorative plaster. But there are downsides. For example, painting decorative bark beetle plaster in two colors causes difficulty for many. Let's look at options and ways to solve this problem.

About the disadvantages of the bark beetle

Minus number 1. Difficult to paint.

This actually presents a certain difficulty, since the texture is such that the finished surface has numerous indentations, similar to indentations in wood eaten by a bark beetle. Painting them is the biggest difficulty.

You need to take a thicker roller and soak it well with paint. The paint will flow into the depressions, then flow out from there, and accumulate unsightly on the surface. You'll have to collect it with a roller. And after all, in these recesses there will still be unpainted areas that will have to be touched up with a brush. In general, you suffer and think that it would be better not to paint.

Minus number 2.

After painting it one color, you will really understand that it was better not to paint it, since a bark beetle painted in one tone only looks good if it is done perfectly. And if you have only once or twice tried to make decorative bark beetle plaster with your own hands, then you are still far from ideal.

But there is a way to fix everything. Paint the surface a second time with a different color. But with such a condition that only the plane is painted, and the stripes, furrows and potholes remain in their original color. This already looks quite original. Therefore, if this happens, then go ahead. Paint a different tone over the already painted one.

How to paint a bark beetle in two colors

But there is an opportunity to avoid the hassle of painting the inside of the texture. The method is quite simple. It consists of adding color to the plaster solution when mixing it. Then, when the decorative layer is made, it will already have its original specific color.

Perhaps you have an idea how to ensure that the color does not differ from batch to batch? This is actually quite difficult. But in fact it is not necessary. An approximate tone for each batch will be enough. At first you will get a difference in the palette of different batches.

By the way, in the first photo the lower part has not dried yet, so it has stains.

But after you paint the entire plane in the second tone, this difference in the recesses is completely invisible. Judge for yourself.

Decorative bark beetle plaster with the addition of collier and the solution painted in a second tone.

The whole difficulty of painting decorative plaster in this case will be so that the paint, on the contrary, does not flow into the furrows of the bark beetle. To do this, take a roller with short pile, for example velor, and, pressing lightly, roll it along the plane of the texture. The result will look great.

Another way to paint decorative plaster

What to do if you have already applied decorative bark beetle plaster, but did not add color to the solution? Is it possible to paint it without having to go through the hassle of painting the inside of the texture? There is a second method, invented by enterprising painters. We take a primer, latex or acrylic, and add color directly to it. And then we saturate the entire finished surface with this tinted primer. The primer is liquid and flows quite easily into all pores. And when dry it forms an indelible layer. At first you may be horrified, because who knows what will happen.

Type of decorative plaster after applying a primer with color added to it

But after painting the plane in the second tone, you will not be disappointed. After all, the result will be such that you won’t be able to tell what you used to paint it for the first time, paint or impregnated with tinted primer.

Most likely, these small subtleties will help you make your decorative bark beetle plaster look impressive.

And one more piece of advice. Many who begin this type of work for the first time immediately choose the most noticeable and largest wall. Don't make a mistake. Start with the most inconspicuous one. And when it comes to that big one, you will already have some experience.

Sources:

sferatd.ru

Painting decorative plaster with your own hands: tricks for working

Painting decorative plaster is not only necessary to perform a decorative function, but also to protect the base of the facade.

Depending on the type of paint chosen, the facade is protected from external influences. negative factors such as rain, snow, ultra-violet rays. The paint layer can be adjusted according to the amount of brightness. If the resulting color is not satisfactory in intensity, then the paint can be applied in two or three layers.

Types of paint for facades

Before starting work, you need to understand how to paint the walls of the building. The future coating must not only perform decorative functions, but also provide protection. Before starting work, all facade surfaces that will be affected by processing must be primed. The primer will provide additional protection and improve the quality of paint adhesion to the surface.

The paint for decorative plaster must be impervious to water, the pigment must be resistant to ultraviolet radiation, as well as temperature changes.

An important point: if the composition contains fire retardants or antiseptics, this will also be a plus. Fire retardants prevent the coating from catching fire, and antiseptics prevent the growth of mold bacteria, which can cause rot.

Among the many types of paint, the following types are most suitable:

1. Silicate. The basis of the composition is potassium glass in liquid form; this glass forms a coloring layer that does not absorb water from the outside and does not allow it to pass through from the inside.
2. Alkyd compounds are also not afraid of water, but at the same time they take a long time to dry.
3. Acrylic paints can have different composition. Any type of decorative plaster can be used for exterior painting.
4. Silicone compounds have all the advantages that are listed above and do not have any disadvantages.
5. Oily. Now these compounds have begun to be abandoned due to the emergence of other, more quality compounds. But at the same time oil paints is also an excellent option and combines all the advantages that they should provide. There is one downside: it takes a long time to dry.

Also, various pigmented compositions with antiseptics can be used. It makes sense to use such compositions when painting decorative plaster in two colors. First, an antiseptic composition is applied to the entire surface of the wall, and then the protruding part of the plaster, which creates the texture, is painted.

Some compositions can be pigmented independently, this, on the one hand, is a definite plus. This way you can create your own shade. But the downside is that one bucket of paint is unlikely to be enough for the entire facade of the house, which means getting a second identical bucket of the same shade will be very difficult, and sometimes even impossible.

Application methods

If the question arises of how to paint decorative plaster, then you need to know the methods of applying paint. Depending on the desired effect, various techniques are used that make it possible to obtain a different decorative layer.

1. Paint in one layer. This is how walls are painted if you just need painting and nothing more. Use a brush or roller with long bristles. It is necessary that the tool completely paints the surface.
2. Painting decorative plaster with your own hands with a dry brush. Place a minimal amount of paint on the tips of a short-haired brush and apply the paint with light, sweeping movements. As a rule, this technique is used when walls are painted in two colors.
3. Blurring coloring of decorative plaster is used when they want to emphasize the bottom layer of plaster. True, this method requires a lot of investment in both time and effort. To begin with, the painted layer is left to dry, after which the paint is washed off with a damp cloth. This work is hard and long. But it does show the resulting effect: in the depressions the color remains unchanged, but the surface is dull and worn. Thus, textured plaster is painted when they want to achieve the effect of an aged surface.

Covering the façade with decorative plaster suggests the possibility of avoiding painting work. Therefore, the question arises: is it possible to leave the surface without painting? Yes, you can, the coating leaves such possibilities. But it’s still better to protect your home additionally.

Sometimes metallics are used instead of a second color. The resulting effect is really very interesting, but working with metallics is not so easy. Firstly, they must be applied clearly over the textured plaster. Metallics only emphasize the texture. Secondly, when applying it is necessary to ensure that the composition does not get into the depth.

Otherwise, this place will simply merge into one color. Metallics are applied either with a small short-haired brush or with a sponge. There is no need to apply a lot of metallic, it will be unsightly. They only emphasize the effects of plaster and paint the facade.

Colorless coating and additional protection

Varnish is used as a colorless coating. But it can also be used for additional protection of an already painted surface. It adds shine to both treated and untreated surfaces and also protects the coating from damage. Filling the depressions of textured plaster, the varnish does not interfere with the manifestation of the texture effect, but at the same time perfectly protects the layer from possible destruction.

Decorative plaster for painting with varnish can be processed in two or three layers of varnish. Before each new application, the previous layer must be allowed to dry thoroughly. Moreover, due to the fact that the varnish dries quickly, you don’t have to wait a day or two. A few hours are enough and you can start reapplying.

Tricks at work

To make the surface attractive and beautiful, you must adhere to some rules, especially if you do the painting yourself:

1. It is necessary to carry out work only after priming. If you ignore this point, the adhesion of the paint to the facade walls may be poor and after drying the layer may crack and begin to fall off the surface.
2. Windows, doors and non-paintable surfaces must be protected with film or construction tape. This is done to ensure that splashes or drops do not fall on these surfaces.
3. The paint must be applied horizontally first, and then spread along the wall with vertical movements. This will avoid drips, a thick layer and the paint will be applied correctly.
4. Before work, as well as during work, the paint must be mixed well.
5. When working with a roller, wring it out well, and when working, paint is applied first from top to bottom, and then from bottom to top.

Plaster is an excellent coating for any home; due to the possibility of painting it in one or two colors, the house can be beautifully decorated and given a special style.