DIY pendant lamp made from stainless steel sheet. DIY chandeliers and lamps. DIY chandelier photo

A chandelier in any room is no longer exclusively a lighting device. It would not be an exaggeration to say that this is the piece of furniture that is the main decoration in any room.

Of course, a DIY chandelier will be a particularly valuable thing. This will not only highlight the special taste of the home owners, but also their creative mind.

Despite the fact that if you decide to make a lampshade with your own hands for a chandelier, you will need to spend quite a lot of effort, because the process requires special concentration - surely the work time cannot be considered wasted, since the work will bring incredible pleasure and will even leave a pleasant aftertaste, and in the future you will definitely want to repeat this kind of work again.

If you are thinking about how to make a chandelier, then you have probably already seen that today you can use the most various materials and sometimes completely unusual. For example, very often the lampshade for a chandelier is made of wood or glass.

However, if you want something even more incredible, then you can also use cardboard, wooden skewers, and even wine bottles. The choice here depends solely on the ideas that the creator has, as well as on various kinds of wishes of the apartment owners.

In addition, a chandelier from scrap materials must also be created taking into account general interior rooms.

Chandelier made from plastic spoons

Disposable spoons, which most people are used to using exclusively for picnics, can actually also be one of the simplest and yet easily accessible materials for creating an interesting chandelier option for any room.

If you look at a photo of a chandelier of this type, you will be struck first of all by the variety color range, and in the future it will be easy to understand that the material will last a long time.

Moreover, in order to create such interesting subject interior, you will need a minimum of financial and material investments.

What materials will be needed?

• Any empty bottle made of plastic. The only condition is that its volume cannot be less than five liters.
• Any plastic spoons. Their number depends solely on the chosen size of the future chandelier.
• Glue that allows you to glue plastic together.
• A socket from an old, no longer working chandelier.

The process of creating an original chandelier

Prepare plastic bottle. First of all, you need to get rid of the label and bottom, and also dry it properly.

Remove the spoons from the plastic and use a knife to remove any handles that are not needed. The only thing you need to do is leave a couple of centimeters above the so-called “scoop” level.

Glue the blanks to the base of the prepared bottle. On the “tail” that remains, you need to apply as much as possible. more glue and then press it to the surface.

It is very important to continue to cover the entire bottle in this way directly in a circle until the entire prepared perimeter is “occupied” with plastic spoons.

It is best to arrange them in a classic checkerboard pattern and move them slightly together.

This way it will be possible to reduce the number of “free spots” to a minimum.

• The shade is removed from the old prepared chandelier and placed in a dried bottle.
• If desired, decorative ones can often be done in a similar way.

That's all. All that remains is to install the chandelier in the chosen location, and also check its operation by connecting it to the power supply.

Another interesting chandelier option is a chandelier with decorative butterflies. It is worth noting that when going to almost any master class on making a chandelier, designers always offer to learn how to create it, which is not surprising, because it can fit perfectly into almost any interior of the room.

Note!

Besides the fact that this option looks truly luxurious and expensive, even a child can do it with the help of an adult, so its popularity is easily explained.

DIY chandelier photo

Note!

There is no doubt that properly executed kitchen lighting sets the tone for the entire interior. A chandelier can become the central element in this cozy and warm room.

Using scrap materials - or even waste - you can make a lampshade from threads, an eco-style lamp from jute twine or plastic bottles, or you can make a real masterpiece - a beautiful chandelier from wooden or glass beads.

You can also not only hang a lamp made by yourself in the kitchen or dining area, but also give it to your loved ones as a gift.

Method 1. From scrap materials - anyone can do it!

The simplest DIY lamp is made from threads. Indeed, with similar design even a child can handle it. So, to make a chandelier from threads, we will need:

• Threads - you can take regular jute twine or thick cotton threads with a total length of at least 100 meters, the color is chosen based on your imagination and the existing interior;
• PVA glue and brush for applying it;
• Petrolatum;
• 2 balloon– one for work, the second for testing; It is better to take a round ball, not an ordinary one, then the shape of the lamp will be the correct shape.

Advice! A children's or rubber beach ball will also work. For very large lamps, a fitball, for example, is suitable.

Work on creating a ball of thread is carried out in the following sequence:

1. Inflating the balloon required sizes. Do not forget that the resulting lampshade made of threads will repeat the shape of the ball. Using a marker, draw one or two circles at the top and bottom (more at the bottom).
2. Pour glue into a container and carefully process the threads. And the ball itself can be coated with Vaseline with a brush.

Advice! You shouldn’t apply glue to all the threads at once - it’s better to move along the winding area.

1. Next comes winding the threads around the ball, taking into account the drawn holes - the density of the winding determines how your lampshade will ultimately turn out.

1. After the ball is wrapped, you need to leave the future chandelier to dry for at least 24 hours.
2. The ball bursts and its remains are easily removed from the robust construction. The result was a lampshade made of solid threads.
3. A hole is cut at the top to accommodate the cartridge.
4. You need to check the strength - another balloon is inserted into the lamp and inflated. This will demonstrate the flexibility of the design.

In this way, you can also create local lighting in the kitchen by creating several lamps from threads with your own hands. Or you can hang it in the dining area, as shown in the photo.

Do not forget that for a ball of thread you can make additional decor in the form of interesting colors, beads, butterflies or artificial flowers, or you can make a whole bunch of balls different sizes.

Using the same principle, you can come up with your own unique design lamp For example, from lace, or ceiling lamp as in the photo below.

Method 2. Creating a masterpiece - you need to try!

You can get excellent kitchen lighting if you make your own lamp from beads or fabric. You will get a lamp in style or a real candelabra chandelier.

For this job you will need:

• An old hoop, garden basket, hanging metal planter, or wire to create a frame;
• Decorative chains;
• Beads, beads, ribbons, strong threads;
• Lamp socket.

The lamp will be a two- or three-level structure of rings located one above the other and connected by chains or wire.

Rings can be taken in different sizes, creating a lampshade in the spirit of a vintage classic, or the same size - this is exactly the kind of lighting that is done in.

The base of the lamp is certainly painted, wrapped or decorated, after which they begin to string the beads.

The consumption of beads in this project is as follows:

Bottom part: beads with a diameter of 16 mm, 15 pcs. on a thread;

Upper part: beads with a diameter of 12 mm, 31-32 pcs. on the thread.

Here you can vary the degree of tension and the number of threads.

Advice! The work should be carried out by first hanging the chandelier and inserting a socket into it.

By analogy, you can create a chandelier from artificial fruits for the kitchen. And subdued lighting will be achieved if you use fabric to cover the frame. As a rule, such a lampshade is made for country and country styles.

Method 3. Lamps made from waste materials - for a modern kitchen!

The most original lamp can be made from this waste material, like plastic bottles and disposable spoons - they are beautiful, cheap and environmentally friendly!

We make a lampshade in a minimalist style and - no additional decorations from threads or beads, only matte white or colored plastic. To make such dim kitchen lighting with your own hands, we will need:

• Base made from a 5-liter plastic bottle;
• Cartridge with wire and lamp;
• Glue for high-quality fixation;
• Lots of disposable spoons.

To make a chandelier with your own hands, cut out the bottom of the bottle and cut off the handles of the spoons (not completely, so that a small handle remains). Using glue, we fix the cut spoons on the base bottle. They need to be placed evenly, in a row, then the lampshade will look attractive.

Advice! Each next row overlaps, without gaps.

The resulting chandelier will resemble fish scales. However, it should be remembered that this design is quite dense, which means that additional lighting will definitely be needed in the kitchen.

The shape of the lamp can be different, for example, in the form of a lotus.

You can also make such decorations from disposable spoons.

A lamp made from plastic bottles, or rather from their bottoms, made with your own hands, may seem like lace or consisting of many small flowers.

Advice! Such a lampshade can be made not white, but colored - which means you need to take colored bottles or paint it with paint original color: copper, gold, steel, pink, black, etc.

The resulting lampshade can be hung in the kitchen or above the dining table.

Let your kitchen be cozy and bright! We wish you creative success and present some more great ideas for making kitchen lamps with your own hands from improvised materials.

Decorating your home yourself favorite hobby many housewives, this article reveals how to make a lamp with your own hands. You can revive the interior of a living room, bedroom or hallway using improvised means, just by changing the shade of a chandelier, floor lamp or table lamp. Do-it-yourself lamp shades can be used not only in residential interiors, but also in cafes, pubs, and pizzerias.

Selection of materials and lamps for the lamp

Products made for children's rooms must be made from natural, non-toxic materials and painted environmental paints.

When manufacturing, you should also remember fire safety Therefore, lampshades made of flammable materials made from paper, plastic, feathers or threads should only be used with lamps that have a low heating temperature.

Need to use LED or fluorescent lamps. They have a number of advantages:

• long term operation;
• minimal heating of the base from the glass part;
• the light has three shades: warm, cold, neutral.

In addition, such lamps are also called energy-saving; their only drawback can be called high cost.

It is also advisable to have a specialist connect the wire to the socket. You should not try to perform this operation yourself, as this may lead to undesirable consequences. It is more convenient to decorate an existing lamp frame or make it from durable and not very heavy materials.

To create lamps they use following materials: scissors, mounting knife, fishing line, wire, pliers, hot gun, in some cases it can be replaced with super glue. They should be used by an adult; it is unacceptable to involve a child in gluing. Since in one case he will get a burn, and in another he may glue his fingers together or stick to the parts of the future product.

What can a lampshade be made from?

Many craftsmen make lamps from completely unnecessary materials:

• from plastic or glass bottles;
• newspapers, thin or colored paper;
• artificial or natural threads;
• dried branches of unusual shape;
• disposable spoons;
• old disks.

Plastic lamp

From plastic containers You can easily create a homemade chandelier of different sizes.

1. For the base you need to take a 5 liter bottle. The bottom is cut off from it. Then circles with a diameter of 1.5 cm are drawn on the surface. They need to be cut out with a mounting knife or small scissors.
2. The bottom of the bottles for decoration is cut off and the entire surface is cut with scissors into strips 0.5 - 1 cm wide, then the workpiece is heated over a lit burner. When exposed to heat, the stripes will take on a chaotic appearance.
3. Then the blanks are inserted into a 5-liter container with holes, and with inside The lids are screwed on. Then a wire is threaded through the large neck and the lampshade is installed. For such a lampshade you need to use an energy-saving lamp.
4. In some interiors you can find a fancy lamp made on the basis of an ordinary hanger or straw hat. In general, limit the scope of imagination of both home craftsmen and professional designers can't do anything.

Glass bottle lampshade

Very interesting option homemade chandelier obtained from glass bottles. They are used to decorate the halls of catering establishments. Also this a good option for the kitchen in a residential building or apartment. This can be a lampshade consisting of one or several bottles, the bottom of which is cut off. You can do this yourself, but it is better to use the services of a workshop where they cut glass and mirrors.

How to use thread

For a lampshade made of threads or ribbons you will need: finished frame made of strong wire, thread different color, scissors, glue.

1. The frame consists of two rings connected to each other by metal pieces. You can make it yourself from strong wire.
2. One color or several shades of thread is required.
3. A thread is secured to the bottom, then it needs to be pulled through the top ring, lowered down and thrown through the bottom ring. You need to make sure that the thread is taut and the turns fit snugly against each other. As soon as the thread runs out, you need to attach the next piece to the bottom ring.
4. Carefully trim the remaining threads and glue them on the back side.

Spoons for lamp

You can make a multi-tiered, colored lamp from ordinary disposable spoons.

1. It is necessary to make a frame from wire; for a round small lamp you need to make three circles with a diameter of 12, 18, 26 cm. Then the circles are fastened together using fishing line. The largest diameter will be at the top; there should be the same distance between them.
2. In the spoons you need to make a small hole with a thick needle at the top of the handle.
3. Spoons color acrylic paints in three colors, for example, yellow, orange, red.
4. Assembling a homemade chandelier: cut the fishing line to a length equal to the distance between the circles. A spoon is tied to one end of the fishing line, and the other to the frame. You need to tie spoons to the lower circle of small diameter yellow color, to the middle - orange and to the top - red.

Lightweight and elegant lampshade

For a paper lampshade, paper or thin cardboard is suitable. Such a lampshade can be either rectangular or square shape. First you need to think about the size of the lampshade; the larger the room, the wider the structure can be. In a small nursery or hallway, a lampshade with a diameter of 30–35 centimeters will look good.

The frame can be made of wire; it will consist of an upper and lower part; consider making a lampshade in the shape of a cylinder.

1. You need to make two circles of wire required diameter. They are connected to each other using a fishing line, the distance between the lower and upper frames is 12 - 15 cm, the hoops are fastened with fishing line in three or four places. The larger the diameter of the base, the more connecting elements need to be made.
2. On a piece of paper you can draw circles of different diameters and figures of cartoon characters. Outline drawings can be taken from the Internet and printed, then redrawn using carbon paper. A special ruler is suitable for drawing circles, or you can outline lids or buttons of different diameters. Some drawings are completely cut out stationery knife, some cut along the contour.
3. The paper is tried on the base and glued with an overlap. Then glued to the wire, it can also be secured using thin wire. To do this, first make a hole in the paper with a thick needle or awl, then thread the wire and carefully tie it to the frame. It is advisable to glue thin paper, as it can easily be damaged.

Exclusive lampshade made of metal basins

1. Cans made of any metal are used; an interesting option would be made from copper or aluminum containers. An old, used basin will also work. If there is a through hole in it, it needs to be welded or sealed, for example, epoxy resin.
2. Inner surface needs to be painted in light color so that the light reflects as much as possible from it.
3. The outer surface can be painted in a dark, rich color that harmonizes with the interior.
4. On bottom part fringe about 5 centimeters long is glued to the headband with hot glue. In the central part of the basin you need to make a hole for the wire. It can be drilled with a drill or pierced with a nail.

Such a lampshade can be decorated with a mosaic of CDs. To do this, the discs are cut into small fragments with sharp scissors, which are glued to the outer surface of the pelvis. You can glue only the bottom outline and paint the rest. Or decorate the entire surface of the lampshade with such a mosaic. The more convex the surface, the smaller the disc fragments should be.

Natural materials

An original lamp can be made from a dry branch of an unusual shape. It needs to be cleared of bark and covered with stain, then, if desired, treated with clear varnish. The branch must be attached to the hook on the ceiling using regular fishing line. Then I wind the wire with the lamp onto the branch several times. A branch entwined with several wires looks beautiful.

You can make a lamp from plastic hangers. Described in detail in the video:

Lamps for different rooms

DIY bottle chandeliers are more suitable for the kitchen. Structures made of glass or plastic will be easy to clean from dust and wash if necessary. For the kitchen, hallway or living room, a lamp made of natural wood.

For a children's room, a lampshade made of painted plastic bottles, a floor lamp made of bright threads, or a paper composition would be more suitable. Last option cannot be called durable, but this is the option that children will like. Girls will like a lampshade with butterflies and plant elements; boys will like designs with cars, superheroes or bright lampshades made of plastic.

Some cafes and pubs use original lamps made from bottles to decorate the hall. These could be beer bottles. They can serve as a lampshade for light bulbs, or be an interesting frame for a lamp.

Ideas for homemade lamps by location

With your own hands you can give new look floor lamp. You can decorate the lampshade with fabric, threads, paper with cut-out patterns, and you also don’t need to ignore the base and leg of the lamp. They can be painted with acrylic paints, glazed, and decorated with beads. The decor of the lower part of the floor lamp should echo the elements in the upper part. The simplest option is to decorate the lampshade in a single color with lace or guipure.

Decorating lamps

The lower part of the thread lamp can be decorated with pom-poms of the same size hanging on a thread. They are glued to the inside of the frame with glue. Pompoms can hang on both the same and different heights. They can be made in one color or combined several shades.

To decorate paper lamps, you can use lace, thick tulle, and beads of different sizes. You can decorate glass jars or bottles with glass pebbles, which can be purchased at hardware stores. You can also use buttons of different sizes and colors. Small buttons can even be glued to PVA.

On new year holidays It is customary to decorate the Christmas tree, but you can also decorate the shades of lamps and floor lamps. Here you can use regular rain, hand-carved snowflakes, Christmas tree figurines, decorative balls and a regular garland. If a wall or floor lamp is installed Powersave lamp, then its lampshade can be decorated with paper snowflakes.

Wall sconces are installed in living rooms, bedrooms, and children's rooms. After repairs, you can use old sconces only by changing them appearance. You can paint the body of the lamp in a light color, and apply bronze or silver paint on top with a hard bristle brush to create a patina effect. If the lampshade is glass, the desired pattern is applied to its surface using a glass stencil. Here you can use contour paints (they are used to create stained glass) or aerosol paints.

In this article we propose step-by-step master classes How to make table lamps with your own hands from improvised materials that you always have in the house. It would seem at first glance ordinary and unnecessary things, but from them you can make original and designer lamps for the desktop.

The most popular and simple materials at hand are: glass bottles and cans, cardboard and paper, plastic vessels, water pipes and cement. We will show and tell you how to make lamps from this in this article.

With a simple and elegant copper table lamp, you can decorate any corner of your home by making it yourself. She'll fit in perfectly modern interior from loft style to rustic. Prostate and laconicism are the main trump cards of this table lamp.

To do this you will need the following tools:

• Roulette, marker
• Pipe cutter and washcloth
• Wire stripping and stripping tool
• Pliers and a thin flathead screwdriver
• crosshead screwdriver

M materials:

• Copper pipes
• Acetone and super glue
• Copper corners 90°, 7 pcs.
• Electric wire
• Plug and Electric socket
• Switch and light bulb

Technique for assembling a table lamp

To begin, take a tape measure, a marker, a pipe cutter, a rag, copper pipes and acetone.

Mark and cut the tubes

• Use a measuring tape and marker to mark where you will cut the copper pipes.
• Do this carefully, measuring every millimeter precisely, because if the parts are different, then the end result will not be the same size as they should be.

• Guide the pipe cutter and use the nut to adjust the diameter of the pipe. Look along the copper tube, gradually readjust the diameter with the nut, so that the closure continues until the pipe is cut.
• Afterwards, using acetone and a rag, you can wipe the markings off the pipe.

TIP: Our parts have: 3 cuts of 15 cm, 1 cut of 20 cm, 1 cut of 45 cm, 1 cut of 25 cm. We used 12 tubes. When designing your light fixture, please note that the copper elbow size will be added.

While the cable is inside, we connect the parts

Insert the parts together and glue super glue. In order to avoid problems in the future, it is better to glue each part and place it next to each other.

Even though the glue works instantly, you may want to wait a few minutes before proceeding to ensure that the pieces are glued together perfectly.

Tip: It will be more convenient to apply glue if you use a brush. If you want the cover to be at the very top, install it first. This way the first part will be ready, and the cable will go in a different direction.

Tools:

• Wire Stripper and Wire Stripper
• Incisors
• thin flat screwdriver
• crosshead screwdriver

Materials:

• fork
• electro chuck
• switch
• Copper pipes
• electrical wire

Install the electrical system

1. Open the front panel of the cover and start by stripping the insulation. Connect the ground ( Blue colour) and phase (brown, gray or black) using the two screws you will find inside.
2. Repeat the same process on the plug and switch.
3. In the switch you will find two pairs of small screws, a cable that you must cut to the height you want the switch to be and connect to the corresponding sockets going inside the small screws.
4. All you have to do is screw in the light bulb to create your copper table lamp.

Finally, place the lamp in a corner or place you like and see how it will become a wonderful addition to your interior, lighting up the space!

Master class: Table lampfrom paper

When I first saw the Robert Delta table lamp, it was love at first sight! The shape is amazing, it comes in different bright colors, everything I like. I was recently wondering since the accessories were surprisingly durable, why not use them for a lamp?

Here are all the materials used:

• old lantern or lamp kit
• template and thick cardboard or paper, you can take polypropylene sheets
• glue and putty
• sanding block (medium + fine)
• wood block (add weight to base)

Tools:

• art tapes
• metal ruler/xacto knife
• drill (can optionally replace xacto knife)

Lamp manufacturing technology

• Firstly, print the template (6 pieces of each triangle) (1 of each hexagon).
• Cut out the shapes so that they fit snugly on the board. Then use glue to attach the pieces to the back of the mat.
• Using a metal ruler and Xacto knife cutting board, cut each shape.
• Put them together.

• Next, glue the bottom (shapes 2 + 4) to the base (shape 6). The triangles fit together nicely and if you did everything right they will just fall into place.

Then use small pieces of art tape to attach them together and wait completely dry glue.

TIP: Use super glue, it dries instantly (we used Aleene). Apply glue lightly, and wipe off excess.

1. After gluing the bottom half (shapes 2 + 4 to the base, turn mold 6 upside down (open end down), place the square on a flat surface and let it dry overnight, this will help maintain its area.
2. The next day, start working on the top of the lamp. Glue the shape 1 + 3, leaving a little hole to insert the lamp inside. The top one (form 5) was glued together with artistic tape, but it is not yet glued to form 1 + 3.
3. Then reinforce the seams with glue on the inside.

Then start working on the base of the lamp.

The level at the bottom of the lamp needs to be made a little bigger, so cut some 1×4s to raise it a little. It will also add extra weight, giving it more stability. Use screws to attach the 1×4 to the existing metal base. (We swapped the existing rod with one from another lamp to get it to the correct height).

Next, drill a hole for the cord and insert a plastic sleeve from an old lamp. The lamp should be disassembled, and the cord and wire should be pulled through the threaded rod of the hole in the new base. Inside the lamp, glue it in the center.

At the top (shape 5), mark the center and drill a hole for the center rod. Then glue it in place.

1. After applying the adhesive, remove excess, and if necessary, lightly, and apply a second layer after sanding.
2. Using a medium-grit putty and fine sandpaper, finish with a sanding block. IN this moment, you'll notice its sturdy base.

Once you've finished removing dust, apply paint! To cover the top of the threaded rod, use the top of an old lamp - it just slides over the rod. Then return it back to the nest!

That's it, your handmade table lamp is ready.

Bottle table lamp

Tin can lamp

This lamp is perfect for a home desk, both for students and schoolchildren. Boys will especially appreciate it; it looks more like a transformer and a robot from the future. You can paint or decorate the jar itself with paper, thread, or make it more embossed. How correct.

Table lamp made from plastic bottles

Plastic bottles can always be found around the household, so decorating an old table lamp is not difficult. Usually, when restoring old lamps, the bases are left and plastic is used for the lampshade. The lampshade mount is usually used as an old one. When working with plastic bottles, remember that they are easier to cut paper knife or construction knife. Glue is used for rubber or special glue for plastic.

Table lamp made from branches and slices

Wood in the interior is always a classic - it is always fashionable and relevant. By decorating a table lamp with a cut of wood or an old piece of driftwood with your own hands, you will get a designer item that simply has no price.

1. To do this, we need to select any piece of wood we like, process it correctly namely, dry it, apply impregnation against pests and cover it with varnish.
2. The second stage is to mount the top of an old floor lamp into the base. If this is not the case, it doesn’t matter; light supply stores usually sell bases for lampshades.

Other original ideas

The basis for a table lamp can be, in principle, any item you don’t need: these are children’s toys, Sewing machines, unnecessary socks and so on. Experiment and create beauty!

Find out how to make a lamp out of wire and mesh so that flowers can grow inside it. How to turn a snag into a lamp, and tree branches into a floor lamp?

How to make an original lamp?

Very interesting designer item comes from the most simple materials, most of which remains from the picnic. If you go out with friends or family, you definitely need to clean up the trash after you. This not always desirable task will be made more enjoyable if you ask to stack the plastic spoons separately. If you have children with you, arrange a competition to see who can throw the most spoons and the fastest into a separate trash bag or bag.

You will also need water cans. After a fun picnic, when you arrive home, some time later, you can make original lamps from the containers left over after the feast. Give them to friends, keep them for yourself to hang in the hallway, kitchen or garden.

So, here’s how to create such a chandelier with your own hands or with the help of your family. First put next to each other:

• 5-liter oval-shaped plastic bottle;
• disposable plastic spoons;
• cable with socket and plug;
• low power LED light bulb;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

To prevent such original lamps from leading to a fire, take an LED rather than a regular Ilyich light bulb.

For information: 4–5 W LED light bulbs correspond to 40 W, and 8–10 W correspond to 60 W of conventional electric ones.

Carefully, so as not to cut yourself, remove the bottom of the canister with a knife.

Also, observing safety precautions to avoid injury, cut off the handles of each plastic spoon completely. Apply a little hot glue from a gun to the cut edges of the “blades” and glue them to the bottom tier of the bottle. Usually 17 pieces go here. Then, overlapping, attach the second and subsequent rows, arranging the elements in a checkerboard pattern.

To cover the neck, glue 10-12 spoon blades together, forming them into a ring.

Pass the socket with the light bulb and cable through the cut bottom hole in the bottle. If this "electrical" part is a problem for women, call your husband. If you don't have one, buy a cable from a hardware store with a socket and plug already screwed to it. You can borrow this working part of the lamp from an old one.

Place a “ring” of spoons on the top of the canister and screw on the lid. To do this, let your husband drill a hole in it with a drill, and you yourself can do this manipulation with a hot nail or self-tapping screw, holding it with pliers. The original lamp is ready.

3 models of designer lampshades with your own hands

Ideas are in the air. If you are at the dacha and don’t have this piece of furniture there, it’s easy to make it yourself from what you have on hand. Take:

• hollow dishes;
• wire;
• polyurethane foam;
• gloves;
• paint;
• brush;
• pliers.

You can use unexpected things as a base: an old saucepan, a flowerpot, an already unnecessary children's potty.

Turn any of these auxiliary items over and place them upside down on a flat surface. Wind the wire, its turns repeat the shape of the future product, they should be the same as the lampshade. With your own hands, but wearing gloves, take the can in your hands, squeeze the foam out of it little by little onto the frame, covering the wire, let it dry.

After this, use a knife to make the contours more even, cutting off the excess. Paint it in your favorite color, white looks airy and elegant. Such a lampshade, made with your own hands, will decorate summerhouse. You can make a few and hang them here. By avoiding big expenses, this way you decorate the space.

This lampshade looks stylish and modern, while the next one has a classic look. For it use:

• thick wire;
• pliers;
• small plastic bottle of water.

Let's start making a lampshade with our own hands by making the top central element. To do this, wind 1 turn of wire onto the bottle, remove it, cut off the excess, twist the ends to make a ring. Its diameter should be such that the cartridge can be threaded through from below, and it will stay on the ring and not come out through the top.

Now roll the wire into a large outer ring. We will fasten it. To do this, cut 4 identical pieces of wire with pliers, secure the first end of each to the small ring, and the second edge to the large ring. The upper part of the lamp is ready.

The dimensions of the lampshade depend on whether it is being made for hanging from the ceiling or for a table lamp. The first one is larger than the second one.

Roll the bottom ring from the wire; it is the largest. Connect it to the second top five pieces of wire, distributing them evenly. All that remains is to decorate the frame of the lampshade. To do this, pass the wire through the second ring, curling it into waves and twisting it through the base. Also design the second ring.

All that remains is to cover it with fabric. Attach a flap from the second top to the bottom ring, cut to size, adding to the seam. Hem big sides the resulting rectangle. Sew the fabric on the side directly on the frame, decorating this place with braid. That's it, you've made a wonderful lampshade with your own hands.

If you want to see for yourself modern ideas on this topic - please! In capable hands and construction mesh will turn into a stylish lampshade.

With your own hands or by calling a man, cut a rectangle from it with metal scissors. To secure the socket, twist a circle out of wire and secure it on top of the lamp with four pieces of wire.

If you don't have coarse mesh, use pliers to trim off the excess sections to create more space between the wire strips. Paint the lampshade and the frame is ready.

And now the magic begins. You can make an original lamp that will benefit not only people, but also plants. Attach a flower pot with a flower at the bottom of the lampshade. You can tie it, woven using the macrame technique, to the lower turns of the wire with a thick rope. Check that the fastening is secure.

If there is a man in the house and welding machine, call on this tandem to make a metal ring with “rays” that need to be welded to the bottom of the lamp.

If you have a home climbing plant, for example ivy, pass its lashes between the lattice cells. The original lamp will become a house for a flower. It is better not to use ordinary light bulbs, as they are very hot and can burn plant leaves. In addition, the air around the flowers will be too hot. Screw in an LED or fluorescent light bulb.

For such original lamp, you needed:

• construction mesh or strong wire;
• brush and paint (optional);
• pliers;
• light bulb with socket;
• flower.

You can secure cups with seedlings well on such a lampshade, thereby finding extra bed for its cultivation and conditions for lighting in the evening.

We make a floor lamp and a table lamp with our own hands

While walking in the forest, do not pass by a florid piece of driftwood lying around. Put it in a bag and take it with you. Wash it at home, if there is bark, peel it off with a knife. Sand the surface with fine sandpaper if necessary. Cover with wood varnish.

In order for the table lamp to hold well, the driftwood must be screwed to a durable pedestal with self-tapping screws. It should be quite heavy. Oak is suitable for it. If you find a broken branch of this tree in the same forest, saw off a circle 5–7 cm thick from the thick part.

It will also need to be sanded and varnished. When these wooden blanks dry, connect them with self-tapping screws of sufficient length, first passing them through an oak stand, and then plunging them into a piece of driftwood. You can also use bolts and nuts.

You already know how to make a lampshade with your own hands. Therefore, make it and attach it to the driftwood, wrapping it with wire.

If the old floor lamp stand is no longer pleasing or you just want to decorate it, also use wood for this. Look how good the birch stands look. Attach a branch of this tree to the lamp and see what kind of floor lamp you could make with your own hands.

How to crochet a lampshade?

If you are tired of the old floor lamp, you can transform it with your own hands, giving it a “zest”. Take an openwork braid and sew it on the top and bottom fabric lampshade. You can decorate with glitter by gluing them in the form of a pattern, evenly or randomly.

A floor lamp or chandelier will turn out unique if you knit a lampshade for it with your own hands. This can be done with crochet or thin knitting needles. For the first option, you will need:

• hook;
• cotton threads;
• pattern for knitting a napkin;
• water;
• starch;
• ribbons.

You can use, for example, this pattern for a napkin.

Measure the top circumference of the lampshade, we need its diameter. Knit a chain from air loops. Next, knit in the round, based on the napkin pattern. Measure the height of the lampshade and the diameter of its bottom circle. Based on this data, draw a trapezoid or rectangle (depending on the shape of the lampshade). Crochet this figure. Sew to the side.

Using single crochets, tie the top circle of the lamp and this trapezoidal or rectangular part.

Boil a glass of water, stirring, pour in 200 ml cold water, in which 1.5 tbsp is diluted. l starch. Boil for 1 minute, remove from heat, cool. Place a knitted lampshade here, wet it well, then wring it out, let the water drain, and the fabric will dry, but remain slightly damp.

Place it on the lampshade. To ensure that the knitted lampshade holds well, you can pass several ribbons or ribbons between the loops and tie them.

Lampshades look very beautiful if they are decorated with crocheted flowers.

A solution of starch or PVA will help give the shape of a knitted lampshade. Put it on the frame, apply glue, let dry.

In the second case (when knitting needles are used), you need to make calculations for knitting, draw a pattern based on the measurements of the lamp, and knit a trapezoidal or rectangular lampshade. Similar models are suitable for floor lamps and chandeliers of strict shape. If you need to crochet a semicircular lampshade, first make wedges and then connect them with single crochets.

Here is another openwork chandelier. It’s nice to make muslin with your own hands and decorate the bottom of the product in a circle. But first you need to create the lampshade itself. The crochet pattern for this beautiful thing is presented right there.

On bedside table A table lamp will look amazing if it has a lampshade like this, the knitting pattern for which is also given.

If your son or daughter won’t let you finish your work, demanding your attention, invite the children to make a lampshade too, and let them roll strips of paper into tubes with their own hands. It's better to wrap them on a thin pencil, go to wooden stick for sushi, and then glue the free edge so that it does not unfold.

Now you need to glue the resulting blanks, using an object of a suitable shape as a frame, for example, a 5-liter canister. Having done the first inner layer, let the child move on to the second. There should be several of them to close the gaps. When the PVA has dried, cover a table lamp with this lampshade or hang it from the ceiling. It looks original and extravagant.

If you are interested in other ideas on this topic, watch the video:

A very interesting version of a lamp made from disks: