DIY smartphone stand. DIY phone stand for the office, home and car: MK with step-by-step photos and video tutorials. From Lego

Stand- useful and convenient thing at home. For example, phones or tablets, which have become an integral part of our Everyday life, in stationary conditions a little inconvenient to use. If you do not have a branded or suitable case that can secure the gadget in an inclined position, then you will have to hold it with your hands. This is inconvenient when watching a movie for a long time, while eating or reading for a long time.

The best solution to this problem may be to purchase a stand specifically designed for this purpose. But sometimes we need it right now, or we simply feel sorry for the money for a seemingly temporary thing. In this case, you can make a stand yourself from available materials. It does not take a lot of time! A couple of minutes and you can comfortably sit in front of the screen of your gadget, while freeing your hands.

In this article we will rely primarily on options for phone stands, but they can also be slightly modernized and used for tablets, books, even for pictures or plates. It all depends only on your imagination. But if she is sleeping, then there is nothing wrong with it. The options proposed in the article are discussed in detail, and it will not be difficult for you to slightly increase the dimensions specifically for the thing for which you are making a stand.

Handy materials to help

You can make a stand yourself from scrap materials. Almost any material you have at home is suitable for this. It could be:

• wire
• cardboard
• cardboard box
• fabric and padding
• bottle
• tree
• paper
• pencils
• constructor
• stationery holders
• unnecessary plastic cards
• old cassette player

Only your imagination can limit your choice. Of course, the stores offer a huge selection of products in this category. However, making the holder yourself has a number of undeniable advantages:

• Rapidity. Sometimes you need a stand as soon as possible, and there is no time to go to the store to buy it.
• Inexpensive or free. You can make a holder from what you already have in your home.
• Originality. With your own hands you will create a truly unique product.

Phone stand made from pencils

In order to collect this design, you will need:

• 6 pencils
• 4 rubber bands

Despite the intricate appearance, this design is very easy to assemble. The idea is that two pencils are held together at the ends with an elastic band, and the third pencil is inserted between the turns of the rubber band. In the end it will work out geometric figure- tetrahedron. If you still have questions about how to make this version of the stand, then use the example below.

The picture clearly shows how the pencils are held together.

To avoid slipping and make the stand more stable, use pencils with erasers at the ends.

Phone stand made from paper clips

The most economical and simple version of the stand, to create which you only need a paper clip.

To do this, you need to bend it into the same shape as in the figure.

This design will hold your phone without any problems.

Plastic card phone stand

Any unnecessary plastic card will do for this. Simply fold it along the short side, leaving about 1 cm from the edge, and bend the remaining part in the opposite direction exactly in half. You will get it as shown in the picture.

Cardboard phone or tablet stand

Cardboard- excellent material, which is widely used for various homemade “stuff”. Probably, many people have a cardboard box or an unnecessary sheet of cardboard at home. It’s worth trying to use it to create a stand.

To do this you will need:

• cardboard
• scissors

From a sheet of cardboard folded in half, cut a strip measuring 10 by 10 cm. Then draw the figure shown in the figure on it and cut it along the contour.

You will get a comfortable and stable stand that you can carry with you.

This holder option can be used for a tablet or book. The essence of manufacturing is the same, you just need to adjust the part to the size of your gadget, as shown in the figure.

It is necessary to use cardboard that bends well so that the stand does not “open up”.

It is important to understand that a cardboard stand is not necessarily a sloppy design Brown. It can be stylish, comfortable and beautiful. You just need to change the shape a little and the result will change dramatically.

Origami paper phone stand

You may not have cardboard at home, but you do have thick paper. This is also suitable for making a stand! For this you only need paper and scissors. Cut out the shape according to the diagram below, then fold along the fold lines.

That's all. The origami stand is ready to use.

Wire stand for phone or tablet

One of budget options made from scrap materials.

During work you will need:

• wire 2-3 mm thick
• pliers
• wire cutters to cut wire

Everything is done as simply as possible: in in the right places the wire is bent so that it becomes a holder.

To make the structure more stable, the wire can be connected with a rubber band.

Such a stand can become a real design solution: you can paint it a different color and it will be completely transformed, or you can fill the “voids” with decorative wire curls. This design is suitable for both a phone and a tablet, the only difference is the size of your gadget.

Unusual Lego phone stand

Probably, this version of the stand will especially appeal to teenagers and men. Here you can show your imagination by creating a whole complex for your smartphone with the ability to change position, and maybe even amplify the sound of the speaker, or get by with a minimum of details. Creative process will not only bring pleasure, but also bring benefits.

To make such a design, you will need several parts and a base. The level of inclination can be changed by adding or removing parts. And the position of the gadget is easy to change, also adjusting the design.

Phone stand from an old cassette deck

Perhaps someone has an old cassette player lying around at home. It is unlikely that it will ever be useful, and with the advent of disks and electronic media, no one uses cassettes anymore. But still, you can find a use for the cover in which the cassette was located.

To do this, just “turn” the cassette player inside out, tilting the lid back. The hole in which the cassette was held can accommodate a telephone. The advantages of this design are that it is easy to wash and transparent.

Phone stand made from a plastic bottle

Many of us go on a trip or run errands by train. Often, on trains there is nothing near the sockets where you can securely place your phone. However, the gadget is discharged and needs to be charged. You can simplify this task by using a stand made from a bottle. Its essence lies in the fact that the gadget is placed in the cut off bottom of the bottle, which remains hanging on the plug from the charging device. This way, you don't have to stand nearby and hold the phone in your hands or look for a way to secure it.

To make such a stand holder you will need:

• plastic bottle for shampoo or drink
• scissors

First, wash the bottle to remove any residue. cosmetic product or soda. Then, mark it. Back wall The stand should become a kind of handle on which the phone holder will hang. The front wall should be high enough so that the phone does not fall over the edge. The next step is to cut out the stand along the office.

To do this, it will be more convenient to use a sharp stationery knife.

Cut a hole at the top of the handle so that it can be attached to the fork charger. You can decorate the stand to suit any taste: using adhesive paper, paints or stickers.

Wooden phone or tablet stand

If you want to do original stand, then one of good materials for its manufacture can be called wood. Such a stand will be strong, durable, and can also serve a good gift close person. It is important to understand that working with wood requires some minimal skills and special tools.

In the process of work except wooden block you may need materials such as:

• jigsaw
• sandpaper
• wood cutting knives

Be careful and attentive when working with such tools.

Stages of making a stand:

• Process the wooden block by sawing off the excess parts and making a recess at the top in the middle for a phone or tablet.
• Using sandpaper, remove all roughness and splinters from the surface of the future holder.
• You can cover ready product varnish or special paint.

Another option for a wooden stand for a phone or tablet is an analogue of its cardboard version. In this case, it is better to use plywood instead of a wooden block.

To do this, make a stencil of the “legs” of the holder and a crossbar that will fasten them together. And transfer it to the plywood. Carefully cut with a jigsaw and smooth sandpaper unevenness and roughness. Using super glue, connect the legs and the crossbar.

DIY stand case for your phone or tablet

The most popular option for a gadget stand is a stand case. You will have to tinker with it a little, but the result is worth it. This option is convenient to take with you when traveling, it is durable and can protect the screen.

To make such a holder you will need:

• facing material, it is best to choose leather
• material for internal lining
• plain and thick cardboard or rigid material
• elastic band for fastening
• pencil
• ruler
• scissors
• double sided tape

How to do it?

• Cut the cardboard according to the size of the tablet so that it completely covers it. This is the future basis, the dimensions of which will be basic for all elements.
• Make several folds in the same way that the front of the case will then need to bend to support the tablet.
• Now we take hard material, which will give the case stability. We cut it so that it follows the contour of the workpiece.
• We apply it to the base and make an edging so that it does not interfere with the folds.

• WITH inside processing the case soft materials, gluing it to the base workpiece with double-sided tape.
• The next step is fastening for the tablet itself. To do this, we make small holes in the rigid elements for elastic bands that will hold the tablet.

• We glue the finishing material on the outside.

Do this as carefully as possible. The appearance of the product will depend on this.

That's all. The stand is ready! It is convenient and can be used not only as a holder, but also to protect the screen.

Stand-bag for tablet or phone

An original and cute version of a gadget stand. It is suitable for girls and can be a cute home accessory.

To make it you will need:

• scissors
• textile
• padding material
• thick cardboard
• thread and needle
• button

Manufacturing process:

• First you need to cut out a template from cardboard according to the size of your gadget.
• Then cut out a rectangle from the fabric twice the size of the resulting template.
• Fold the fabric base in half and mark with stitches a fold 10 cm from the edge.
• Sew the bag, leaving one side unsealed.
• After turning the bag inside out, position it so that the seam runs through the middle and a diamond shape is formed at the end. After ironing it, bend the top corner of the diamond so that it is in the middle and sew. This is shown in more detail in the figure.

• Then insert cardboard into the product and fill the remaining space with padding material.
• Make a seam along the very edge of the template. Folding the edges of the unstitched side, carefully stitch it, leaving an opening for stuffing.
• Make a roll and sew up the hole.

That's all. The product is ready. You can decorate it to your liking, giving it even more charm!

Phone stand made from paper clips

Another interesting and at the same time very simple option. If you have several at home stationery clips, then feel free to use them!

You will need 2 clamps: one larger and the other smaller. By connecting them together as shown in the figure, in a couple of seconds you will get a phone holder.

This can also be done from two clamps of the same size.

Phone stand made from an unwanted CD

An unnecessary CD can serve as a stand for your phone. In order to make such a holder, you will need a little time and work with temperature. So be careful!

Conclusion

For creative person all boundaries are erased. And he can create any object with his own hands from scrap materials. For the stand, you can use options such as an ordinary office business card holder, or a book stand that is well known to all of us since school times, or even a sleeve from toilet paper could be an excellent holder option.

There are many opportunities for creativity, you just need to look around carefully. Maybe you will make the most unusual accessory for your smartphone with your own hands!

How often, when we are at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. Ours will tell you how to do this. step by step wizard Class.

How to make a phone stand with your own hands: options for the office and car

Whether at work or in the car, we all need to be connected at all times. At the same time, you don’t want to spend a lot of money on expensive stands, because they can be made from waste and used materials.

The simplest version of a phone holder is a card stand. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, without allowing it to break.

Experience shows that the stand is made of plastic card is very reliable and can even withstand air travel during severe turbulence.

To make a phone stand from paper clips or binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and the resulting structure should be placed on the table so that the clamp bigger size rested on its surface.

Similar coasters can be made in five minutes from clothespins.

Paper clips make great option car stands. To make it, you need to disassemble the clamp big size and bend the metal parts slightly as shown in the photo below.

To avoid damaging the surface of the phone metal fastenings It is recommended to wrap the threads in several layers. We return the holders to their place, additionally securing them with adhesive tape and a rubber band. We attach the clamp to the ventilation blinds. The phone is securely attached between the metal parts of the binder.

Regular office paper, folded in a certain way, can even withstand the weight of a large smartphone. To make a paper stand, you need to measure the dimensions of the phone and adjust the pattern below to fit them.

Cut the piece out of paper, fold it along the dotted lines and insert the side parts into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for stands for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of your home. Let's consider options for such products.

A phone stand made from newspaper tubes will be a wonderful gift and an excellent decoration for any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six workpieces parallel to each other at a distance of approximately 1-1.5 cm and firmly fix them in the machine or any in a convenient way. We place knitting needles or wire in the outer racks to make it more convenient to form smooth and neat contours of the product. We begin to braid the base with a working tube using the rope technique or calico weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

We weave a rectangular piece of the required length. We take out the knitting needles or wire. The ends of the stands are carefully tucked in and trimmed. We give the workpiece the required curved shape, if necessary, wetting it a little with water.

Similarly, we weave the leg of the stand using fewer tubes. We bend the finished leg, install it on the main part and secure its posts between the rows of the stand. We cut off the excess and hide it. We coat the product with glue, if desired, additionally paint it and cover it with 1-2 layers of varnish. After completely dry The stand can be used for its intended purpose.

Modular origami is a fairly young, but very popular type of needlework. With its help, you can make many unusual and original gizmos, including a phone stand from modules.

To make a stand you will need double-sided blue and Pink colour. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. It will require 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we place one pink module in the middle.

In the eighth row we put 6 modules, make a skip, another 10 modules, skip, 6 modules. The number of pink modules is 2 pieces. In the next row, we place three pink modules on the pink area. We begin to design the shaped edging of the stand, as shown in the photo below.

In the back part we form a heart-shaped pattern, above which we install a number of modules blue color. Gradually narrow the stand until a triangular wedge forms at its back.

The module stand is ready!

Video on the topic of the article

We invite you to watch the video tutorials below on how to make other options for phone stands.

The mobile phone has become an invariable attribute modern man. And on the road, and at home, and on the desktop useful gadget they give the main place, otherwise “suddenly someone will call, but I won’t hear/see.” To conveniently place a cell phone on a table, stands were invented. You can buy them in the store, or you can make them yourself from scrap materials. Even the most useless at first glance “unnecessary garbage”, like cardboard packaging for dairy products or a long-used CD cover, can be useful in your work.

Cardboard stand

The first option is to make a mobile stand out of cardboard. This does not have to be a solid piece of material; you can take a used small-volume milk carton (0.5 ml). There is no need to glue anything: you only need scissors.

The box must be thoroughly washed, crumpled and the bottom cut off. Then cut it along the folds.

The work will require a central part in the shape of two rectangles. There is a fold between them. It needs to be cut and folded outside inwards, pressing the bend with one hand.

Starting from the opposite end, from the bottom, you need to cut out a shape that resembles the letter “T”. It is narrowed at the top, but has a beveled corner.

When the figure is unfolded, the bottom edges become where the phone sits. It rests on the central edge. The budget stand is ready!

CD cover stand

Surely everyone has a couple of DVDs lying around their house. One of the unnecessary covers can be turned into a stand for your mobile phone.

To do this, the cover must be cut in half. Then cut off all the holes and rivets so that only a smooth rectangle with two curved corners at the ends remains.

The plate must be clamped with tweezers or pliers and placed in boiling water. This will make the plastic soft and pliable.

Holding the plate with pliers or any other tool, it must be bent so that one of the corner ends does not reach the other slightly. 2-3 cm is enough; the phone will be located in this space. One of the corners is glued to the surface. The result is an interesting and light stand. The device can be placed on it both vertically and horizontally!

Paper clip stand

Mobile phone stand made from paper clips – interesting thing, which can be done in 2 minutes. To do this, you need a large, massive paper clip, which you just need to straighten correctly!

To begin, the wire is completely straightened into a line. Then you need to pinch it and bend it again:

1. Bend in the shape of a tick - U.
2. Bend both ends at an angle of 90 ° C, starting approximately in the middle.
3. Bend the ends of each end slightly.

Thus, an ordinary paper clip turned into a laconic stand. The phone lies horizontally on it.

Stand made from toilet paper roll

Every home has something as good as a roll of used toilet paper! Don’t rush to throw away the cardboard form – it can be turned into a mobile stand in a matter of minutes.

All that is required is to correctly cut part of the sleeve at an angle. There should be a small piece of cardboard left at the front to create a stop. Such a stand will not be able to accommodate a phone that is too tall, but standard size“fits” perfectly.

If desired, the stand can be decorated: painted, wrapped in fabric or covered with paper for gifts. And no one will believe that it was once part of a toilet roll.

Conclusion:

When working with familiar things, it is important to give free rein to your imagination: try it on, think, experiment. Then stands for mobile phones will appear in the house regularly - and always different and interesting!

In the world modern technologies It’s hard to imagine a person who doesn’t have a mobile phone. With the entry of gadgets into our lives, accessories also appeared, of which there are a huge variety on store shelves and on the Internet. Often, a regular holder, case and other things to add character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is perfect solution for each.

Making an accessory is not at all difficult. To carry out the mission, all you need is materials, time and desire. There are many variations and techniques to help everyone do what they like best. So you should turn on your imagination and use all your ideas.

What can you use to make a stand for a mobile phone?

Making something yourself gives ample opportunities for creativity. A DIY phone stand can be made from the following materials:

• paper;
• wood;
• plastic;
• gypsum;
• any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will be. You can make the most incredible accessories with your own hands that are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be made from ordinary sheets of paper? This material would actually make a great phone stand. It’s not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

• colorful paper or white paper, which will then be decorated;
• multi-colored gouache, watercolor or acrylic paint;
• glue;
• ruler for measurements;
• a simple pencil;
• scissors;
• various decorative ornaments, which will be appropriate, should also be kept on hand.

A properly organized space will help you create a DIY phone stand in a matter of minutes. Consequently, the one who embodied it will have an excellent opportunity to become the owner of a beautiful and convenient mobile accessory.

Sequencing:

• First you need to figure out what shape the stand will be.
• Then you need to draw templates of the required sizes on a piece of paper.
• Elements for the product are cut out from them.
• Then carefully, according to a diagram that was previously drawn or printed from some website, we glue together the necessary parts.
• After this, you should wait until all the elements are fixed.
• The next step is connection individual parts between themselves.
• Let all fasteners dry. After this, you can start decorating the product. At this stage, you can use various sparkles, buttons, beads and other small beautiful elements.
• After decoration, the phone stand can be considered ready. We created a masterpiece with our own hands. With the advent of such a device, there will never be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are a lot of options using which you can turn any idea into reality. Why is it better wooden holder? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t do it with sketches and ideas alone. IN in this case You will also need:

• special equipment;
• skills;
• ability to work with wood.

Before you make a phone stand with your own hands, you should analyze your actions. If you have never worked with wood before, then it is better to rely on a paper phone holder. And if you have experience, then for work you need to prepare:

• the wood from which the structure will be constructed;
• woodworking tools;
• product diagram;
• a felt-tip pen for drawing on wood;
• ruler;
• glue;
• accessories (buttons, beads, rivets);
• simple pencil.

After everything necessary elements are at hand, you can begin to directly implement your plans. The work sequence is as follows:

• First you need to find suitable scheme for the product.
• Then it is required to wooden base put marks along which the connector will be cut in the future.
• The next step is to cut out the shape with the available tool.
• Then it is necessary to carry out control measurements and find out whether it fits mobile phone into the cut-out connector.
• After this, you need to glue the prepared parts together.
• The next step is to make the product smooth. This can be done with a file or special device, operating from the network.
• When the surface is smooth, you can paint it ready-made form some color.
• After painting, you must wait for the product to dry.
• The work is completed by gluing the accessories chosen for this mission.
• At the end completely finished design should be opened with varnish, which will add shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to make such an idea a reality. After all, it’s much more pleasant to put your phone in a stand that you created with your own hands.

Beautiful design of a phone stand

In no case should we forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories you have at home. It can be:

• shells;
• buttons;
• rhinestones;
• beads;
• foil;
• colored tape.

In general, everything that is at hand and has unusual look, can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Once you get the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it’s worth making several spare coasters: what if someone suddenly invites you to visit, and there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, then a second one will never hurt.

Having a phone holder means you won't have to spend a lot of time looking for mobile device. It will also be reliably protected. There is less chance that someone will drop it, step on it or spill tea, and most importantly, while driving a car, you will not be distracted. For aesthetic reasons, it can be an excellent decoration for a car interior.

The simplest holder is a design for the steering wheel with silicone loops. Adjustable bracket The panel into which the gadget is inserted is distinguished by the fact that it is compact and the phone can be easily installed. Another very simple holder is a ball on a magnet.

Designer coasters are made from various materials, have different shapes– it all depends on the creativity of the master. For example, there is a lawn on a plastic stand and a phone holder at the bottom.

The gadget holder can be made as an elegant wooden stand. For example, in the form of a tree with a hollow or improvised stumps. A neat wooden stand with randomly placed slots where a mobile phone can be inserted will look original.

Wooden stand can be very laconic and resemble a photo frame into which a smartphone is inserted. A wooden organizer on a panel can have not only a cell for a gadget, but also for pens and watches. A wooden stand in the form of a figurine supporting a phone looks original, but it needs to be firmly secured.

Sometimes phone holders make a nice souvenir when you don't have a gadget. For example, a gadget stand in the form rotary phone looks original, showing the connection of times. Or look unexpectedly creative when the holder is an alarm clock into which a mobile phone is inserted.

Conceptually, the holder looks like a marble figurine holding a gadget in its hands. Even in winter, a shell stand will bring back memories of the sea. The stand can look like your favorite food, for example sushi, a hamburger or a sandwich with caviar. In such souvenirs, the wildest fantasy can turn into reality.

The highlight of the holder in a minimalist style will be the original mount. For example, according to the principle table lamp, attached with a clothespin to the table. Even an ordinary stationery binder will look original as a phone holder.

It’s worth looking at things with different eyes and making a cozy soft pillow or chair for your phone. If a woman is driving, it could be a fluffy basket, an original fabric pocket, a soft envelope with a cute hinged loop. Knitted animals in the form of a stand will always help preserve good mood. Stylish bright accessories will not only serve you by performing certain functions, but will also help you think positively.

The holders may have a flexible cord for fastening, a suction cup, or an adjustable bracket.

When choosing a phone stand, everyone is guided by their own taste preferences. In terms of functionality, the holder must have good fastening to keep your phone safe.

How to make it yourself

From the paper clip

You can make a device that supports your phone yourself. This stand will definitely be exclusive.

Homemade holders can be of three types:

• spoiling the interior;
• not durable;
• representing a whole work of art that requires real skill.

We take the binder, remove the staples, bend them so that a holder is formed, wrap them with thread and place them in their original place, securing them with an ordinary rubber band. All that remains is to attach a simple device to the air duct. The phone is attached securely. The only negative is that the phone cannot be quickly removed from the holder.

From wire

In order to attach a phone to a wire holder, you will have to sacrifice the integrity of the front panel of the cabin, since holes will need to be drilled on it. The holder is made from strong wire, bending it accordingly and inserting it into the holes. The phone must be firmly attached to the holder.

Aluminum stand

It takes a little effort to make a stand out of aluminum. In any hardware store You can inexpensively purchase connecting tubes with angles of 45 and 90 degrees, as well as an aluminum pipe with a diameter of 47 mm. You will also need ice cream sticks and an old phone case.

You can start creating the holder after you have determined the place where it will be located. Now the necessary measurements are made. The pipe is cut into three parts. The short part is attached to a 45 degree angle tube. The horizontal part is held in 45 and 90 degree angle tubes. The longest part - a vertical pipe, 10 - 13 cm long, will hold the stand.

For greater strength, all fasteners are first lubricated with glue. A couple of cuts should be made in the case into which the ties are inserted. The cuts are on the tube. A long pipe is tied together with ties. Between aluminum pipe and glue it with a cover wooden sticks. The final stage is fastening connecting tube to the car.