Hot stand: we make it ourselves from different materials. Choosing a stand for hot food Do-it-yourself stand for a frying pan made of wood

Today I will show and tell you step by step how to make a wooden stand for a hot frying pan or saucepan. You will see the entire stage in the photographs, and there will also be a description of each stage. Wooden crafts are not conquered by everyone, they are very difficult to make and take a lot of time, like for example or on, and you also need to initially have some skills.

The stand that we will make, as I wrote above, can be used both for flowers and for hot dishes. Personally, I use it more for dishes. You can simply create a board, sand it, cut out the outline and that’s it, but I want to make a board with a limiter. What does it mean? In our board that we will use for a hot frying pan, for example, there will be a small recess and if we place dishes in this recess, they will not move out of there and cannot fall out. You will understand everything during the process and production.

We will definitely need carpentry tools, which is why I said that we need to have at least some experience in carpentry.

And now the important points:

1. When we put hot food on the board, it should not char.
2. As I already wrote, the board must have stops so that it does not slip when carrying various dishes.
3. The main thing is that the stand needs to be made quite thick, because it can break or simply bend from the heat and take an incomprehensible shape. Also, the bottom of the stand should be even and smooth. Along with the dishes, you need the ability to conveniently take the stand.

Since we are making a stand for the frying pan, we need to make a recess exactly the same size in diameter as the frying pan itself. We take it, put it on paper and outline what we need to make a hole later. Cut out this template from paper.
You must first find a thick cut of any tree, I took a diagonal cut. It is best to have a thickness of about 35 millimeters, then the craft itself will not be too heavy, from 800 to 1000 grams (1 kg).

Let's take it in our hands electric jigsaw and cut out an ordinary blank, such that it is larger than the diameter of the frying pan.

The surface needs to be planed with a plane, since all our appliances are electrical, this is very easy to do.

Now we grind the surface with a special machine. But let's take a rough nozzle.

Then you need to take a special vibratory sander and carefully go over the surface.

After some preparations were made with the workpiece, it became about 5 millimeters smaller.
The next step is to take a pre-cut paper template. Let's place it on the workpiece, but in such a way that it is approximately in the center and has an equal distance from the corners.

In the very center of the cut out circle we need to make a hole of about 5 millimeters. It's better to hit it a couple of times with a dowel.

We will need the hole we made for the next step.

Now we will mill. You need to have a special hand cutters, it is relatively expensive, so there would be several cutters and clamps. A circular stop is required because we need to create a clear circle, or rather a recess, directly under our frying pan. Such a stop has always been included in the kit of any milling tool.

Also included is a semicircular cutter.

Be sure to use a template for general markup. We place the template, then insert a circular stop into the hole, place the router itself on the edge of our template and move it left and right. We secure the guide router with screws.

One problem arises here: the workpiece needs to be secured. This is done using bars that we nail on the sides, and we place the workpiece between them. This is the most the best option, and most importantly the most convenient.

We set the total milling depth to approximately 8-10 millimeters and mill around the circumference, following the paper blank.

Next step: you need to knock out the middle in the circle you have made. We change the cutter, now install a straight cutter (finger cutter, so to speak). But initially we will knock out the edges a little, this is so as not to damage the outer part of the circle.

Then we need to clean (knock out) the entire part of the made nest for the frying pan.

We take a hammer drill and put a polished attachment on it, thereby making the nest neat.

We remove our workpiece and remove the bars. Next, we secure it to the workbench with clamps. In this case, we use a cutter like this, which has bearings.

We need to take the top part of the workpiece and chamfer it. Then we remove a little excess from the edges and round them.

We remove the edges step by step, since it is very difficult to do this right away. These edges are necessary so that you can easily grasp the made stand.

Now the stand for hot pots or pans is ready. And if suddenly there was a branch on the workpiece initially, then find out unnoticed.

We hope that you like our publications about making wooden jewelry and other products with your own hands; we try to choose the most interesting topics that you could bring to “life” yourself.

Before the weekend, we managed to write four publications, each of which we recommend that you read - and or, be sure to read, these are very interesting master classes!

What do we need to make a stand from sawn wood for hot food with our own hands?

In fact, we only need four things:

• Juniper branches (log houses) about three to six centimeters thick, this will be quite enough. Of course, you can always use other types of wood - plum, apple, ash, oak. The main thing is to have a beautiful drawing that will delight your eyes.
• A miter saw (in our case 🙂), at home you can use a regular hacksaw
• Glue, preferably for gluing wood
• Sandpaper

How to make a hot stand with your own hands step by step

• After we have selected the branches (or logs), we begin to process them. If the bark peels off very easily and practically breaks off by itself, then we remove it, but if it holds well, then this is even better, it will be more beautiful.

We cut it into small cuts with a miter saw (about four to five millimeters thick), if you don’t have one, then, as described above, we use a hacksaw.

• After we have cut the required number of juniper cuts (usually 15-17 cuts are required for one stand different diameters), we need to polish them up a little. It should be noted that the fewer cuts you have, the easier it will be to assemble it, but it will not look as impressive. It should be noted that the fewer cuts you have, the easier it will be to assemble it, but it will not look as impressive.

We take wood glue (although PVA is suitable) and glue the cuts together as your imagination tells you, in any case it will turn out very beautiful. It is highly desirable that all our cuts adjoin each other well in several places, so that it is easier to glue them together.

Such coasters for hot dishes can be seen in large numbers in Crimean souvenir stalls. They are made from juniper and they sell very quickly. In conditions middle zone Of course, you won’t find juniper, but such a stand is very easy to make with your own hands from tree branches with beautiful design on the back. These are acacia, apple, plum, apricot, oak and ash.

You can make several of these stands in an hour. First, we need to select branches 3-6 cm thick. You can combine cuts from branches different thicknesses, it will be beautiful.

It is most convenient to cut a branch into cuts 4-5mm thick with a miter saw:

But you can cut the cuts with a hacksaw. It is advisable to sand each cut from the front side with sandpaper.

The bark can be scraped off with a knife, but this is not necessary, especially if the bark is tightly adjacent.

Now we combine a stand from saw cuts of different diameters (in my case). Front side facing inward:

However, it should be borne in mind that the fewer links, the easier it will be to glue the stand together. It is desirable that the round pieces of wood adjoin each other at several points. We glue the links of the stand together, placing saw cuts on top of several circles. To do this, coat the junction areas with PVA glue:

After making sure that all the links are interlocked, we send the stand to dry under pressure. I took a linen bag of sand, placed it on a stand and placed another bucket of water on top. The stand is glued together in 4-5 hours.

There is another manufacturing option wooden stand under hot. We cut out a circle from matting and glue cut branches onto it on both sides. It turns out very stylish and beautiful. Plus it's easier to do:

Please rate this post:

To make the kitchen more comfortable, craftswomen can make a hot stand with their own hands. This is not only a beautiful interior detail, but also a very necessary thing. Any materials will be used.

Tree

The advantage of using this material is that it is more durable than, for example, fabric. To make a wooden hot stand, made with your own hands, you will need:

• Wooden blanks (sold in craft stores. Choose the shape at your discretion).
• A simple pencil.
• Washing gum.
• Acrylic lacquer.
• Paints, watercolors are better suited.
• Brush.
• A device for burning.

Let's get started:

1. First, draw on paper what a hot stand you make yourself should look like. It could be flowers, berries, an ornament or an inscription. The border around the edges, which serves as a frame, looks beautiful. Once you do this, it will be easier for you in the future. Now transfer the image with a simple pencil onto a wooden blank.
2. Take the burning device and wait until it heats up. When everything is ready to continue working, burn out the design.
3. If a simple pencil is visible in some places, be sure to wipe it off with an eraser, otherwise the work will look sloppy.
4. You can leave the design of the stand as is, just cover it with acrylic varnish, or you can continue to decorate it.
5. To do this, take paints and start decorating. Do this very carefully, because it will be difficult to get rid of errors. If you work with acrylic, then pay attention to the fact that in some places you will have to apply several layers to add saturation. Also, these paints can leak.
6. The stand must dry, and then it must be varnished and allowed to stand for several hours to dry completely.

Made with your own hands!

Felt

It’s even easier to make hot coasters from felt with your own hands. They give more room for imagination than wood. You can choose the color and design based on the style of your kitchen.

To create “citrus” coasters you need to take:

• Different colored felt (orange for orange, yellow for lemon, green for lime, etc.)
• Scissors.
• Threads in colors matching the fabric or white.
• A needle.
• Pins.

What do we have to do:

1. Create blanks. For one fruit you need two large circles of colored felt (the size of a future stand), a slightly smaller white circle and eight colored slices.
2. Arrange the pieces in this order: large circle, medium circle and slices. Pin it with a pin.
3. Sew the slices around the perimeter through both layers.
4. To hide the seams, you need to sew a second large circle to the bottom one.

Everything is very simple! Create a few more of these “fruits” so that there is enough for all guests.

Idea

To create a stand for hot food, which you can easily make yourself, you can use scraps of felt. To do this, you only need one large piece, which will be the base, and several strips 5 millimeters wide. Length doesn't matter.

Take 3 different colors and place them on top of each other with a ladder, the indentations should be up to 10 millimeters. The beginning needs to be glued, now begin to tightly twist the strips with a snail, add glue if necessary. To complete the flagellum, make the inner strip 2 centimeters shorter than the outer one and secure it with glue, do the same with the middle one, only make it shorter by only 5 millimeters. Make as many snails as necessary to cover the entire base. Attach the workpieces to it using a heat gun.

Textile

To create such coasters with your own hands from fabric, you will need small scraps. You don't even have to go to the store to buy new materials; you probably have them lying around somewhere at home. So, for work you will need:

• Fabric in eight different colors.
• Sewing machine (if not, you can try to sew it carefully by hand).
• Hexagon pattern.
• Scissors.

What do we have to do:

A do-it-yourself hot stand will be a beautiful addition to any feast. As you have seen, it is not at all difficult to make it from different materials.

This is the weather outside, it’s impossible to sit at home! Take a thermos with your favorite herbal tea, a camera and children - and go to the park, there are so many amazing and wonderful things there that time spent on a walk will be equivalent to five lessons at school, three books read and a long conversation with a mentor. Look around, inhale, admire - this day is unique, and you will definitely get something from it that you will not find on any other day. Birds sing about tenderness, irises proudly raise their heads above the flower beds, just mown grass on the lawns drives you crazy with the smell of freshness - a fairy tale! There is a special mood in the parks now: the stifling summer heat is not yet here, but it is already full of greenery and colors, and it is impossible not to be happy about it. Take a closer look, you will probably find something that will resonate in your soul with notes that only you understand - perhaps these are touching pansies, trustingly basking in the sun, maybe these are neatly whitewashed park borders, pleasing with straight lines, or, who knows, we're talking about about the cuts of dried trees stacked in neat piles, which are carefully removed in the spring public utilities? This is everyone's happiness creative person! Grab the wealth, bring it home - today we will do it!

Wooden hot stand - 5 ideas that you can implement with your own hands:

1. A simple wooden hot stand

Sometimes beauty is not a consequence of the use of drawing, decoupage, knitting and other techniques. Sometimes it’s easy enough to process raw material, highlighting it natural properties to get the perfect item. Try to properly clean and polish the wooden cut, take a closer look - maybe this is already enough to make your hot stand pleasing with its lines and color?

2. Hot stand made of wood with “lace”

What if we combine something that, at first glance, seems to be absolutely opposite in essence? Delicate, weightless, light lace and brutal, real, solid wood? Together we can create something very interesting!

3. Wooden hot stand in the shape of a watermelon

Oh, how I long for summer and berries already! Maybe you should sublimate your dream into creativity? A hot stand in the form of a delicious juicy watermelon is just what you need to cheer yourself up and gain strength and wait for the fruit and berry season. The technique is simple - even if you don’t have any special skills in working with paints, you can do it, it’s not difficult. The main thing is to sand the wood cut well.

4. Hot stand made of wood with a stencil pattern

However, if you have a great desire to decorate wooden cuts drawing, but no visual talent, try to resort to the help of stencils - ready-made or made by yourself. This simple solution will help you do stylish coasters hot, original and unique. Those that you personally find most interesting.